ZYXEL-SAM1216
ZyXEL Communications Corp.snmptranslate -m ZYXEL-SAM1216 -Tpsnmpwalk -v2c -c <community> -m ZYXEL-SAM1216 <host> 1.3.6.1.4.1.890Imports
| BRIDGE-MIB | BridgeId, MacAddress, Timeout |
|---|---|
| IF-MIB | ifIndex |
| Q-BRIDGE-MIB | PortList, VlanIndex, dot1qVlanIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso, private |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Nzyxel | 1.3.6.1.4.1.890 | |||
| Nproducts | 1.3.6.1.4.1.890.1 | |||
| NaccessSwitch | 1.3.6.1.4.1.890.1.5 | |||
| NsesSeries | 1.3.6.1.4.1.890.1.5.5 | |||
| Nsam1216-22 | 1.3.6.1.4.1.890.1.5.5.6 | |||
| Nalarmconf | 1.3.6.1.4.1.890.1.5.5.6.2 | |||
| SalarmOps | 1.3.6.1.4.1.890.1.5.5.6.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The manager sets the corresponding bit value to 1 to start the operation
and the agent clears the object to zero when the operation is successfully completed.
The various bit positions are:
BIT 1: clear
BIT 2: cutoff | ||||
| TalarmConfTable | 1.3.6.1.4.1.890.1.5.5.6.2.2 | NA | ||
table · not-accessible · current This table includes alarm configuration. | ||||
| RalarmConfEntry | 1.3.6.1.4.1.890.1.5.5.6.2.2.1 | NA | ||
| CalarmConfId | 1.3.6.1.4.1.890.1.5.5.6.2.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current 5000: linkUp 5001: linkDown 5002: shdslLoopAttenCrossing 5003: shdslSNRMarginCrossing 5004: shdslPerfESThresh 5005: shdslPerfSESThresh 5006: shdslPerfCRCAnomaliesThresh 5007: shdslPerfLOSWSThresh 5008: shdslPerfUASThresh 10000: eqptVoltageError 10001: eqptTempError 10002: eqptHwRTCError 10003: eqptHWMonitorFailed 10004: coldStart 10005: warmStart 15000: sysReboot 15001: sysAlarmCutoffEnabled 15002: sysAlarmClearEnabled 15003: sysLoginFailed 15004: sysMacAntiSpoofing 20000: enetlinkUp 20001: enetlinkDown | ||||
| CalarmConfFacility | 1.3.6.1.4.1.890.1.5.5.6.2.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Alarm facility.
| ||||
| CalarmConfTarget | 1.3.6.1.4.1.890.1.5.5.6.2.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The destination which alarms are reported to. Set the bit to 1 to enable the target. BIT 1: snmp trap BIT 2: syslog | ||||
| CalarmConfSeverity | 1.3.6.1.4.1.890.1.5.5.6.2.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Alarm severity
| ||||
| CalarmConfClearable | 1.3.6.1.4.1.890.1.5.5.6.2.2.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Setting the object to one indicates that the alarm is to be cleared when user submits alarm clear.
| ||||
| TalarmCurrTable | 1.3.6.1.4.1.890.1.5.5.6.2.3 | NA | ||
table · not-accessible · current This table includes current alarm information. | ||||
| RalarmCurrEntry | 1.3.6.1.4.1.890.1.5.5.6.2.3.1 | NA | ||
| CalarmCurrIndex | 1.3.6.1.4.1.890.1.5.5.6.2.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Index of the alarm. | ||||
| CalarmCurrOccurTime | 1.3.6.1.4.1.890.1.5.5.6.2.3.1.2 | TimeTicks | RO | |
column · TimeTicks · read-only · current Alarm occurence time (in hundredths of a second) since the system was last re-initialized. | ||||
| CalarmCurrTrapOid | 1.3.6.1.4.1.890.1.5.5.6.2.3.1.3 | OBJECT IDENTIFIER | RO | |
column · OBJECT IDENTIFIER · read-only · current Trap OID of the alarm. | ||||
| CalarmCurrParam1 | 1.3.6.1.4.1.890.1.5.5.6.2.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The 1st parameter of the alarm. | ||||
| CalarmCurrParam2 | 1.3.6.1.4.1.890.1.5.5.6.2.3.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The 2nd parameter of the alarm. | ||||
| CalarmCurrParam3 | 1.3.6.1.4.1.890.1.5.5.6.2.3.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The 3rd parameter of the alarm. | ||||
| CalarmCurrParam4 | 1.3.6.1.4.1.890.1.5.5.6.2.3.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The 4th parameter of the alarm. | ||||
| CalarmCurrParam5 | 1.3.6.1.4.1.890.1.5.5.6.2.3.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The 5th parameter of the alarm. | ||||
| CalarmCurrParam6 | 1.3.6.1.4.1.890.1.5.5.6.2.3.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The 6th parameter of the alarm. | ||||
| CalarmCurrParam7 | 1.3.6.1.4.1.890.1.5.5.6.2.3.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The 7th parameter of the alarm. | ||||
| CalarmCurrParam8 | 1.3.6.1.4.1.890.1.5.5.6.2.3.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current The 8th parameter of the alarm. | ||||
| CalarmCurrTimeDescr | 1.3.6.1.4.1.890.1.5.5.6.2.3.1.12 | DisplayString | RO | |
column · DisplayString · read-only · current The string representation of occurence time (YYYY/MM/DD HH:MM:SS). | ||||
| CalarmCurrSeverity | 1.3.6.1.4.1.890.1.5.5.6.2.3.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current The severity of the alarm.
| ||||
| CalarmCurrDescr | 1.3.6.1.4.1.890.1.5.5.6.2.3.1.14 | DisplayString | RO | |
column · DisplayString · read-only · current The description of the alarm. | ||||
| TalarmSeverityPortTable | 1.3.6.1.4.1.890.1.5.5.6.2.4 | NA | ||
table · not-accessible · current This table includes the configuration of alarm reporting severity threshold for each port. | ||||
| RalarmSeverityPortEntry | 1.3.6.1.4.1.890.1.5.5.6.2.4.1 | NA | ||
| CseverityThresh | 1.3.6.1.4.1.890.1.5.5.6.2.4.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The minimum alarm severity that is reported.
| ||||
| Nmulticast | 1.3.6.1.4.1.890.1.5.5.6.7 | |||
| SigmpEnable | 1.3.6.1.4.1.890.1.5.5.6.7.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable IGMP protocol.
| ||||
| NmcastBandwidth | 1.3.6.1.4.1.890.1.5.5.6.7.4 | |||
| SmcastDefaultBandwidth | 1.3.6.1.4.1.890.1.5.5.6.7.4.1 | INTEGER (1..100000) | RW | |
scalar · INTEGER (1..100000) · read-write · current Default bandwidth requirement for a multicast channel.
| ||||
| SmaxNumOfMcastBw | 1.3.6.1.4.1.890.1.5.5.6.7.4.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of row entries that user can create in mcastBwTable. | ||||
| TmcastBwTable | 1.3.6.1.4.1.890.1.5.5.6.7.4.3 | NA | ||
table · not-accessible · current This table defines bandwidth budget for a range of multicast IP channels. | ||||
| RmcastBwEntry | 1.3.6.1.4.1.890.1.5.5.6.7.4.3.1 | NA | ||
row · not-accessible · current An entry of mcastBwTable. | ||||
| CmcastBwIndex | 1.3.6.1.4.1.890.1.5.5.6.7.4.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The index which specify the entry. | ||||
| CmcastBwStartIp | 1.3.6.1.4.1.890.1.5.5.6.7.4.3.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The start multicast IP of the bandwidth control range. | ||||
| CmcastBwEndIp | 1.3.6.1.4.1.890.1.5.5.6.7.4.3.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The end multicast IP of the bandwidth control range. | ||||
| CmcastBwBandwidth | 1.3.6.1.4.1.890.1.5.5.6.7.4.3.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current The bandwidth budget for the multicast IP channels.
| ||||
| CmcastBwRowStatus | 1.3.6.1.4.1.890.1.5.5.6.7.4.3.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of the entry. | ||||
| TmcastBwPortTable | 1.3.6.1.4.1.890.1.5.5.6.7.4.4 | NA | ||
table · not-accessible · current This table specify the multicast bandwidth control of the port. | ||||
| RmcastBwPortEntry | 1.3.6.1.4.1.890.1.5.5.6.7.4.4.1 | NA | ||
| CmcastBwPortEnable | 1.3.6.1.4.1.890.1.5.5.6.7.4.4.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable multicast bandwidth control for a port.
| ||||
| CmcastBwPortBandwidth | 1.3.6.1.4.1.890.1.5.5.6.7.4.4.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Set bandwidth threshold for a port.
| ||||
| NigmpCount | 1.3.6.1.4.1.890.1.5.5.6.7.5 | |||
| TigmpCountPortTable | 1.3.6.1.4.1.890.1.5.5.6.7.5.1 | NA | ||
table · not-accessible · current This table specify the IGMP count limiting of the port. | ||||
| RigmpCountPortEntry | 1.3.6.1.4.1.890.1.5.5.6.7.5.1.1 | NA | ||
| CigmpCountPortEnable | 1.3.6.1.4.1.890.1.5.5.6.7.5.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable IGMP count limiting for a port.
| ||||
| CigmpCountPortLimit | 1.3.6.1.4.1.890.1.5.5.6.7.5.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The maximum allowed IGMP report count for a port. | ||||
| Nmvlan | 1.3.6.1.4.1.890.1.5.5.6.7.6 | |||
| SmaxNumOfMvlan | 1.3.6.1.4.1.890.1.5.5.6.7.6.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of row entries that user can create in mvlanTable. | ||||
| TmvlanTable | 1.3.6.1.4.1.890.1.5.5.6.7.6.2 | NA | ||
table · not-accessible · current A table containing static configuration information for each multicast VLAN configured into the device. | ||||
| RmvlanEntry | 1.3.6.1.4.1.890.1.5.5.6.7.6.2.1 | NA | ||
| CmvlanIndex | 1.3.6.1.4.1.890.1.5.5.6.7.6.2.1.1 | VlanIndex | RO | |
column · VlanIndex · read-only · current The VLAN-ID refering to this VLAN. | ||||
| CmvlanName | 1.3.6.1.4.1.890.1.5.5.6.7.6.2.1.2 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current An administratively assigned string, which may be used to identify the VLAN. | ||||
| CmvlanEgressPorts | 1.3.6.1.4.1.890.1.5.5.6.7.6.2.1.3 | PortList | RC | |
column · PortList · read-create · current The set of ports which are permanently assigned to the egress list for this multicast VLAN. | ||||
| CmvlanUntaggedPorts | 1.3.6.1.4.1.890.1.5.5.6.7.6.2.1.4 | PortList | RC | |
column · PortList · read-create · current The set of ports which should transmit egress packets for this multicast VLAN as untagged. | ||||
| CmvlanRowStatus | 1.3.6.1.4.1.890.1.5.5.6.7.6.2.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry. | ||||
| TmvlanTranslateTable | 1.3.6.1.4.1.890.1.5.5.6.7.6.3 | NA | ||
table · not-accessible · current A table that contains multicast to VLAN translation. | ||||
| RmvlanTranslateEntry | 1.3.6.1.4.1.890.1.5.5.6.7.6.3.1 | NA | ||
row · not-accessible · current An entry of mvlanTranslateTable. | ||||
| CmvlanTranslateIndex | 1.3.6.1.4.1.890.1.5.5.6.7.6.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The index which specif the entry. | ||||
| CmvlanTranslateStartIp | 1.3.6.1.4.1.890.1.5.5.6.7.6.3.1.2 | IpAddress | RW | |
column · IpAddress · read-write · current The start IP of the multicast VLAN translation. | ||||
| CmvlanTranslateEndIp | 1.3.6.1.4.1.890.1.5.5.6.7.6.3.1.3 | IpAddress | RW | |
column · IpAddress · read-write · current The end IP of the multicast VLAN translation. | ||||
| SigmpVersion | 1.3.6.1.4.1.890.1.5.5.6.7.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting IGMP version.
| ||||
| SmaxNumOfQryVid | 1.3.6.1.4.1.890.1.5.5.6.7.7.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of row entries that user can create in qryVidConfTable. This object is supported by R1.02 and later versions. | ||||
| TqryVidConfTable | 1.3.6.1.4.1.890.1.5.5.6.7.7.2 | NA | ||
table · not-accessible · current This table defines statically set VLANs used for response IGMP report. This table is supported by R1.02 and later versions. | ||||
| RqryVidConfEntry | 1.3.6.1.4.1.890.1.5.5.6.7.7.2.1 | NA | ||
| CqryVid | 1.3.6.1.4.1.890.1.5.5.6.7.7.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current VLAN ID. | ||||
| CqryVidRowStatus | 1.3.6.1.4.1.890.1.5.5.6.7.7.2.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry. | ||||
| TqryVidStatusTable | 1.3.6.1.4.1.890.1.5.5.6.7.7.3 | NA | ||
table · not-accessible · current This table shows statically set or dynamically learned VLANs used for response IGMP report. | ||||
| RqryVidStatusEntry | 1.3.6.1.4.1.890.1.5.5.6.7.7.3.1 | NA | ||
| CqryVidType | 1.3.6.1.4.1.890.1.5.5.6.7.7.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current VLAN type.
| ||||
| NqueryVid | 1.3.6.1.4.1.890.1.5.5.6.7.7 | |||
| Nport | 1.3.6.1.4.1.890.1.5.5.6.8 | |||
| TsubrPortTable | 1.3.6.1.4.1.890.1.5.5.6.8.1 | NA | ||
table · not-accessible · current This table includes subscriber attributes for the port. | ||||
| RsubrPortEntry | 1.3.6.1.4.1.890.1.5.5.6.8.1.1 | NA | ||
| CsubrPortName | 1.3.6.1.4.1.890.1.5.5.6.8.1.1.1 | DisplayString (SIZE (0..31)) | RW | |
column · DisplayString (SIZE (0..31)) · read-write · current Name of the subscriber. | ||||
| CsubrPortTel | 1.3.6.1.4.1.890.1.5.5.6.8.1.1.2 | DisplayString (SIZE (0..15)) | RW | |
column · DisplayString (SIZE (0..15)) · read-write · current Telephone number of the subscriber. | ||||
| NshdslPort | 1.3.6.1.4.1.890.1.5.5.6.8.3 | |||
| TshdslLineConfTable | 1.3.6.1.4.1.890.1.5.5.6.8.3.1 | NA | ||
table · not-accessible · current This table includes common attributes describing the SHDSL line. | ||||
| RshdslLineConfEntry | 1.3.6.1.4.1.890.1.5.5.6.8.3.1.1 | NA | ||
| CshdslLineConfShdslMode | 1.3.6.1.4.1.890.1.5.5.6.8.3.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Mode of the SHDSL port.
| ||||
| CshdslLineConfPmms | 1.3.6.1.4.1.890.1.5.5.6.8.3.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Negotiated noise margin mode of the SHDSL port.
| ||||
| CshdslLineConfPboMode | 1.3.6.1.4.1.890.1.5.5.6.8.3.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Power backoff mode of the SHDSL port.
| ||||
| CshdslLineConfPboValue | 1.3.6.1.4.1.890.1.5.5.6.8.3.1.1.4 | INTEGER (0..31) | RW | |
column · INTEGER (0..31) · read-write · current Power backoff value of the SHDSL port.
| ||||
| CshdslLineConfShdslTCMode | 1.3.6.1.4.1.890.1.5.5.6.8.3.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Transmission Convergence Mode of the SHDSL port.
| ||||
| NshdslPortBatchSet | 1.3.6.1.4.1.890.1.5.5.6.8.3.2 | |||
| SshdslPortTarget | 1.3.6.1.4.1.890.1.5.5.6.8.3.2.1 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The managed object is used for identify the target on which
the port configuration should be performed. The target is encoded as:
Byte 1: the octet specifies a set of eight chassis, chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc. | ||||
| SshdslPortOps | 1.3.6.1.4.1.890.1.5.5.6.8.3.2.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The managed object is for SHDSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the corresponding bit value to be 1. The various bit positions are: BIT 1: enable port BIT 2: disable port BIT 3: set SHDSL mode BIT 4: set line profile BIT 5: set alarm profile BIT 6: set pmms mode to be normal BIT 7: set pmms mode to be forced BIT 8: set pbo mode to be normalepl BIT 9: set pbo mode to be forcedepl BIT 10: set pbo mode to be forcednoepl BIT 11: set pbo value | ||||
| SshdslModeForBatchSet | 1.3.6.1.4.1.890.1.5.5.6.8.3.2.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Mode of the SHDSL port.
| ||||
| SshdslLineProfileForBatchSet | 1.3.6.1.4.1.890.1.5.5.6.8.3.2.4 | DisplayString (SIZE (1..31)) | RW | |
scalar · DisplayString (SIZE (1..31)) · read-write · current The SHDSL line profile. | ||||
| SshdslAlarmProfileForBatchSet | 1.3.6.1.4.1.890.1.5.5.6.8.3.2.5 | DisplayString (SIZE (1..31)) | RW | |
scalar · DisplayString (SIZE (1..31)) · read-write · current The SHDSL alarm profile. | ||||
| SshdslPboValueForBatchSet | 1.3.6.1.4.1.890.1.5.5.6.8.3.2.6 | INTEGER (0..31) | RW | |
scalar · INTEGER (0..31) · read-write · current Power backoff value of the SHDSL port.
| ||||
| Npvc | 1.3.6.1.4.1.890.1.5.5.6.8.4 | |||
| SmaxNumOfPvcs | 1.3.6.1.4.1.890.1.5.5.6.8.4.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of PVCs which could be created on a port. | ||||
| TpvcTable | 1.3.6.1.4.1.890.1.5.5.6.8.4.2 | NA | ||
table · not-accessible · current This table includes PVC configuration. | ||||
| RpvcEntry | 1.3.6.1.4.1.890.1.5.5.6.8.4.2.1 | NA | ||
| CpvcVpi | 1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.1 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current VPI of the pvc. | ||||
| CpvcVci | 1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current VCI of the pvc. | ||||
| CpvcPvid | 1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.3 | VlanIndex | RO | |
column · VlanIndex · read-only · current Default VID of the pvc. | ||||
| CpvcPriority | 1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.5 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current 802.1p default priority of the pvc. | ||||
| CpvcProfileDS | 1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.6 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side. | ||||
| CpvcRowStatus | 1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| CpvcProfileUS | 1.3.6.1.4.1.890.1.5.5.6.8.4.2.1.8 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side. | ||||
| TpvcUsRateLimitTable | 1.3.6.1.4.1.890.1.5.5.6.8.4.4 | NA | ||
table · not-accessible · current This table defines the upstream rate limit for each PVC. | ||||
| RpvcUsRateLimitEntry | 1.3.6.1.4.1.890.1.5.5.6.8.4.4.1 | NA | ||
| CpvcUsRateLimitEnable | 1.3.6.1.4.1.890.1.5.5.6.8.4.4.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable upstream rate limit for a PVC.
| ||||
| CpvcUsRateLimit | 1.3.6.1.4.1.890.1.5.5.6.8.4.4.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Upstream rate limit in Kbps for a PVC.
| ||||
| Nppvc | 1.3.6.1.4.1.890.1.5.5.6.8.5 | |||
| SmaxNumOfPriorityPvcs | 1.3.6.1.4.1.890.1.5.5.6.8.5.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of priority PVCs which could be created on a port. | ||||
| TppvcTable | 1.3.6.1.4.1.890.1.5.5.6.8.5.2 | NA | ||
table · not-accessible · current This table includes priority PVC configuration. | ||||
| RppvcEntry | 1.3.6.1.4.1.890.1.5.5.6.8.5.2.1 | NA | ||
| CppvcVpi | 1.3.6.1.4.1.890.1.5.5.6.8.5.2.1.1 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current VPI of the ppvc. | ||||
| CppvcVci | 1.3.6.1.4.1.890.1.5.5.6.8.5.2.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current VCI of the ppvc. | ||||
| CppvcPvid | 1.3.6.1.4.1.890.1.5.5.6.8.5.2.1.3 | VlanIndex | RO | |
column · VlanIndex · read-only · current Default VID of the ppvc. | ||||
| CppvcEncap | 1.3.6.1.4.1.890.1.5.5.6.8.5.2.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Encapsulation of the ppvc.
| ||||
| CppvcPriority | 1.3.6.1.4.1.890.1.5.5.6.8.5.2.1.5 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current 802.1p default priority of the ppvc. | ||||
| CppvcRowStatus | 1.3.6.1.4.1.890.1.5.5.6.8.5.2.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| TppvcMemberTable | 1.3.6.1.4.1.890.1.5.5.6.8.5.4 | NA | ||
table · not-accessible · current This table includes priority PVC member configuration. | ||||
| RppvcMemberEntry | 1.3.6.1.4.1.890.1.5.5.6.8.5.4.1 | NA | ||
row · not-accessible · current An entry in ppvcMemberTable. | ||||
| CppvcMemberVpi | 1.3.6.1.4.1.890.1.5.5.6.8.5.4.1.1 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current VPI of the member ppvc. | ||||
| CppvcMemberVci | 1.3.6.1.4.1.890.1.5.5.6.8.5.4.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current VCI of the member ppvc. | ||||
| CppvcMemberPriority | 1.3.6.1.4.1.890.1.5.5.6.8.5.4.1.3 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current 802.1p default priority of the member ppvc. | ||||
| CppvcMemberProfileDS | 1.3.6.1.4.1.890.1.5.5.6.8.5.4.1.4 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The profile of the member ppvc in DS side. | ||||
| CppvcMemberRowStatus | 1.3.6.1.4.1.890.1.5.5.6.8.5.4.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| CppvcMemberProfileUS | 1.3.6.1.4.1.890.1.5.5.6.8.5.4.1.6 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The profile of the member ppvc in US side. | ||||
| NportOperation | 1.3.6.1.4.1.890.1.5.5.6.8.6 | |||
| SportTarget | 1.3.6.1.4.1.890.1.5.5.6.8.6.1 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The managed object is used for identify the target on which
the port configuration should be performed. The target is encoded as:
Byte 1: the octet specifies a set of eight chassis, chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc. | ||||
| SportOps | 1.3.6.1.4.1.890.1.5.5.6.8.6.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The managed object is for xDSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the corresponding bit value to be 1. The various bit positions are: BIT 1: enable port BIT 2: disable port | ||||
| Nrpvc | 1.3.6.1.4.1.890.1.5.5.6.8.8 | |||
| TrpvcGatewayTable | 1.3.6.1.4.1.890.1.5.5.6.8.8.1 | NA | ||
table · not-accessible · current This table includes Routed Gateway configuration. | ||||
| RrpvcGatewayEntry | 1.3.6.1.4.1.890.1.5.5.6.8.8.1.1 | NA | ||
| CrpvcGatewayIp | 1.3.6.1.4.1.890.1.5.5.6.8.8.1.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current IP of RPVC gateway. | ||||
| CrpvcGatewayVlanId | 1.3.6.1.4.1.890.1.5.5.6.8.8.1.1.2 | VlanIndex | RW | |
column · VlanIndex · read-write · current Vlan id send to this RPVC gateway. | ||||
| CrpvcGatewayRowStatus | 1.3.6.1.4.1.890.1.5.5.6.8.8.1.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| CrpvcGatewayPriority | 1.3.6.1.4.1.890.1.5.5.6.8.8.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current 802.1p p bit send to this RPVC gateway. | ||||
| TrpvcTable | 1.3.6.1.4.1.890.1.5.5.6.8.8.2 | NA | ||
table · not-accessible · current This table includes RPVC configuration. | ||||
| RrpvcTableEntry | 1.3.6.1.4.1.890.1.5.5.6.8.8.2.1 | NA | ||
row · not-accessible · current An entry in rpvcTable.
| ||||
| CrpvcVpi | 1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.1 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current VPI of the rpvc. | ||||
| CrpvcVci | 1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current VCI of the rpvc. | ||||
| CrpvcDSProfile | 1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.3 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The down stream profile of the rpvc. | ||||
| CrpvcUSProfile | 1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.4 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The up stream profile of the rpvc. | ||||
| CrpvcIp | 1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current The IP of the rpvc. | ||||
| CrpvcNetmask | 1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.6 | IpAddress | RO | |
column · IpAddress · read-only · current The IP mask of the rpvc IP. | ||||
| CrpvcGatewayIpAddress | 1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.7 | IpAddress | RC | |
column · IpAddress · read-create · current The gateway IP of rpvc. | ||||
| CrpvcRowStatus | 1.3.6.1.4.1.890.1.5.5.6.8.8.2.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| TrpvcRouteDomainTable | 1.3.6.1.4.1.890.1.5.5.6.8.8.3 | NA | ||
table · not-accessible · current This table includes RPVC route domain configuration. | ||||
| RrpvcRouteDomainTableEntry | 1.3.6.1.4.1.890.1.5.5.6.8.8.3.1 | NA | ||
row · not-accessible · current An entry in rpvcRouteDomainTable. | ||||
| CrpvcRouteDomainVpi | 1.3.6.1.4.1.890.1.5.5.6.8.8.3.1.1 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current VPI of the rpvc. | ||||
| CrpvcRouteDomainVci | 1.3.6.1.4.1.890.1.5.5.6.8.8.3.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current VCI of the rpvc. | ||||
| CrpvcRouteDomainIp | 1.3.6.1.4.1.890.1.5.5.6.8.8.3.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The route domain IP. | ||||
| CrpvcRouteDomainNetmask | 1.3.6.1.4.1.890.1.5.5.6.8.8.3.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The IP mask of the route domain IP. | ||||
| CrpvcRouteDomainRowStatus | 1.3.6.1.4.1.890.1.5.5.6.8.8.3.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| SrpvcArpAgingTime | 1.3.6.1.4.1.890.1.5.5.6.8.8.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set RPVC ARP proxy aging time 10..10000 seconds, 0 to disable againg. | ||||
| SrpvcArpFlush | 1.3.6.1.4.1.890.1.5.5.6.8.8.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Flush the RPVC ARP proxy table.
| ||||
| TdsBcastDisableTable | 1.3.6.1.4.1.890.1.5.5.6.8.9 | NA | ||
table · not-accessible · current This table includes Down Stream Bcast configuration. | ||||
| RdsBcastDisableEntry | 1.3.6.1.4.1.890.1.5.5.6.8.9.1 | NA | ||
row · not-accessible · current An entry in Down Stream Bcast table.
| ||||
| CdsBcastDisableVlanId | 1.3.6.1.4.1.890.1.5.5.6.8.9.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current downstream broadcast disabled vid. | ||||
| CdsBcastDisableRowStatus | 1.3.6.1.4.1.890.1.5.5.6.8.9.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| Npaepvc | 1.3.6.1.4.1.890.1.5.5.6.8.10 | |||
| TpaepvcTable | 1.3.6.1.4.1.890.1.5.5.6.8.10.1 | NA | ||
table · not-accessible · current This table includes PPPoAoE PVC configuration. | ||||
| RpaepvcEntry | 1.3.6.1.4.1.890.1.5.5.6.8.10.1.1 | NA | ||
row · not-accessible · current An entry of paepvcTable.
| ||||
| CpaepvcVpi | 1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.1 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current VPI of the pvc. | ||||
| CpaepvcVci | 1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current VCI of the pvc. | ||||
| CpaepvcPvid | 1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.3 | VlanIndex | RO | |
column · VlanIndex · read-only · current Default VID of the pvc. | ||||
| CpaepvcPriority | 1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.5 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current 802.1p default priority of the pvc. | ||||
| CpaepvcProfileDS | 1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.6 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side. | ||||
| CpaepvcAcName | 1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.7 | DisplayString | RC | |
column · DisplayString · read-create · current Access concentrator name. | ||||
| CpaepvcServiceName | 1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.8 | DisplayString | RC | |
column · DisplayString · read-create · current Service name. | ||||
| CpaepvcHelloTime | 1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.
| ||||
| CpaepvcRowStatus | 1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.10 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| CpaepvcProfileUS | 1.3.6.1.4.1.890.1.5.5.6.8.10.1.1.11 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side. | ||||
| Ntlspvc | 1.3.6.1.4.1.890.1.5.5.6.8.11 | |||
| TtlspvcTable | 1.3.6.1.4.1.890.1.5.5.6.8.11.1 | NA | ||
table · not-accessible · current This table includes Transparent LAN Service (TLS) PVC configuration. | ||||
| RtlspvcEntry | 1.3.6.1.4.1.890.1.5.5.6.8.11.1.1 | NA | ||
row · not-accessible · current An entry of tlspvcTable.
| ||||
| CtlspvcVpi | 1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.1 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current VPI of the pvc. | ||||
| CtlspvcVci | 1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current VCI of the pvc. | ||||
| CtlspvcSvid | 1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.3 | VlanIndex | RO | |
column · VlanIndex · read-only · current s-tag VLAN ID of the pvc. | ||||
| CtlspvcSpriority | 1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.5 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current s-tag priority of the pvc. | ||||
| CtlspvcProfileDS | 1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.6 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side. | ||||
| CtlspvcRowStatus | 1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or delete an existing row in this table. | ||||
| CtlspvcProfileUS | 1.3.6.1.4.1.890.1.5.5.6.8.11.1.1.8 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current The value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side. | ||||
| Ngbond | 1.3.6.1.4.1.890.1.5.5.6.8.51 | |||
| TgbondGroupTable | 1.3.6.1.4.1.890.1.5.5.6.8.51.1 | NA | ||
table · not-accessible · current A table containing the G.Bond configuration information for each bonding group of the device. | ||||
| RgbondGroupEntry | 1.3.6.1.4.1.890.1.5.5.6.8.51.1.1 | NA | ||
| CgbondGroupName | 1.3.6.1.4.1.890.1.5.5.6.8.51.1.1.1 | OCTET STRING (SIZE (0..31)) | RO | |
column · OCTET STRING (SIZE (0..31)) · read-only · current An administratively assigned string, which may be used to identify bonding group. | ||||
| CgbondGroupPorts | 1.3.6.1.4.1.890.1.5.5.6.8.51.1.1.2 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current The set of ports which are currently assigned to the
bonding group of specified group name.
Byte 1: Reserved(chassis)
Byte 2~3: Reserved(slot)
Byte 4: Reserved
Byte 5: Each bit in the octet specifies a port from MSB to LSB.
for example: 32(hex) = 50(dec) = 00110010(bin) means the
port 3, 4 and 7.
Byte 6~10:Reserved | ||||
| CgbondGroupSid | 1.3.6.1.4.1.890.1.5.5.6.8.51.1.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates the sequence index mode of the bonding group.
| ||||
| CgbondGroupUpRate | 1.3.6.1.4.1.890.1.5.5.6.8.51.1.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The UP stream rate. | ||||
| CgbondGroupDownRate | 1.3.6.1.4.1.890.1.5.5.6.8.51.1.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The DOWN stream rate. | ||||
| CgbondGroupRowStatus | 1.3.6.1.4.1.890.1.5.5.6.8.51.1.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the status of this entry. | ||||
| Nswitch | 1.3.6.1.4.1.890.1.5.5.6.10 | |||
| Ndscp | 1.3.6.1.4.1.890.1.5.5.6.10.10 | |||
| TdscpMappingTable | 1.3.6.1.4.1.890.1.5.5.6.10.10.1 | NA | ||
table · not-accessible · current The table contains DSCP mapping configuration for the adsl and ethernet ports. | ||||
| RdscpMappingEntry | 1.3.6.1.4.1.890.1.5.5.6.10.10.1.1 | NA | ||
| CdscpSrcCodePoint | 1.3.6.1.4.1.890.1.5.5.6.10.10.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The DSCP source code point used for mapping. | ||||
| CdscpMapPriority | 1.3.6.1.4.1.890.1.5.5.6.10.10.1.1.3 | INTEGER (0..7) | RW | |
column · INTEGER (0..7) · read-write · current The mapping p bits that will replace the source p bits in the incoming packet. | ||||
| TdscpPortTable | 1.3.6.1.4.1.890.1.5.5.6.10.10.2 | NA | ||
table · not-accessible · current The table contains DSCP mapping configuration for the adsl and ethernet ports. | ||||
| RdscpPortEntry | 1.3.6.1.4.1.890.1.5.5.6.10.10.2.1 | NA | ||
| CdscpStatusEnable | 1.3.6.1.4.1.890.1.5.5.6.10.10.2.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The DSCP port status.
| ||||
| NvlanIsolation | 1.3.6.1.4.1.890.1.5.5.6.10.12 | |||
| TvlanIsolationTable | 1.3.6.1.4.1.890.1.5.5.6.10.12.1 | NA | ||
table · not-accessible · current A table contains configuration of isolated VLAN. | ||||
| RvlanIsolationEntry | 1.3.6.1.4.1.890.1.5.5.6.10.12.1.1 | NA | ||
| CvlanIsolationRowStatus | 1.3.6.1.4.1.890.1.5.5.6.10.12.1.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current Row status of the table used to create/delete an entry. | ||||
| NenetMtu | 1.3.6.1.4.1.890.1.5.5.6.10.13 | |||
| SenetMaxMtu | 1.3.6.1.4.1.890.1.5.5.6.10.13.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the maximum MTU size for layer 2 frame, size from 1526 to 1600, default value is 1526. | ||||
| Ndhcp | 1.3.6.1.4.1.890.1.5.5.6.10.51 | |||
| SdhcpRelayEnable | 1.3.6.1.4.1.890.1.5.5.6.10.51.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable DHCP relay Option82 function.
| ||||
| TdhcpRelay82Table | 1.3.6.1.4.1.890.1.5.5.6.10.51.2 | NA | ||
table · not-accessible · current A table that contains DHCP Relay configuration. | ||||
| RdhcpRelay82Entry | 1.3.6.1.4.1.890.1.5.5.6.10.51.2.1 | NA | ||
| CdhcpRelay82PrimaryServer | 1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.1 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of the DHCP Relay primary server. | ||||
| CdhcpRelay82SecondaryServer | 1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.2 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of the DHCP Relay secondary server. | ||||
| CdhcpRelay82ActiveServer | 1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The current active DHCP Relay server.
| ||||
| CdhcpRelay82Enable | 1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable DHCP relay and Option82 function.
| ||||
| CdhcpRelay82Info | 1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.5 | DisplayString (SIZE (0..23)) | RC | |
column · DisplayString (SIZE (0..23)) · read-create · current User specific Option82 information. | ||||
| CdhcpRelay82RelayMode | 1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current DHCP relay mode.
| ||||
| CdhcpRelay82Suboption2Enable | 1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable Option 82 sub-option 2.
| ||||
| CdhcpRelay82Suboption2Info | 1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.9 | DisplayString | RC | |
column · DisplayString · read-create · current User specified information for Option 82 sub-option 2. | ||||
| CdhcpRelay82EntryEnable | 1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable DHCP Relay
| ||||
| CdhcpRelay82EntryOptionMode | 1.3.6.1.4.1.890.1.5.5.6.10.51.2.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current Option82 format.
| ||||
| SdhcpRelayOption82Sub1Info | 1.3.6.1.4.1.890.1.5.5.6.10.51.3 | DisplayString (SIZE (0..23)) | RW | |
scalar · DisplayString (SIZE (0..23)) · read-write · current User specific Option82 subOption1 (Agent circuit ID) information. | ||||
| SmaxNumOfDhcpRelay82Conf | 1.3.6.1.4.1.890.1.5.5.6.10.51.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of rows that can be created in dhcpRelay82Table. | ||||
| SdhcpRelayOption82Sub1Enable | 1.3.6.1.4.1.890.1.5.5.6.10.51.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable DHCP relay Option82 subOption1 (Agent Circuit ID) function.
| ||||
| SdhcpRelayOption82Sub2Info | 1.3.6.1.4.1.890.1.5.5.6.10.51.6 | DisplayString (SIZE (0..23)) | RW | |
scalar · DisplayString (SIZE (0..23)) · read-write · current User specific Option82 subOption2 (Agent Remote ID) information. | ||||
| SdhcpRelayOption82Sub2Enable | 1.3.6.1.4.1.890.1.5.5.6.10.51.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable DHCP relay Option82 subOption2 (Agent Remote ID) function.
| ||||
| Nmacfilter | 1.3.6.1.4.1.890.1.5.5.6.10.53 | |||
| TmacFilterPortTable | 1.3.6.1.4.1.890.1.5.5.6.10.53.1 | NA | ||
table · not-accessible · current This table includes the status of mac filtering for each port. | ||||
| RmacFilterPortEntry | 1.3.6.1.4.1.890.1.5.5.6.10.53.1.1 | NA | ||
| CmacFilterPortEnable | 1.3.6.1.4.1.890.1.5.5.6.10.53.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable MAC filtering for the port.
| ||||
| CmacFilterPortMacCount | 1.3.6.1.4.1.890.1.5.5.6.10.53.1.1.2 | INTEGER (1..128) | RW | |
column · INTEGER (1..128) · read-write · current The total number of MAC addresses allowed for the port. | ||||
| CmacFilterPortFilterMode | 1.3.6.1.4.1.890.1.5.5.6.10.53.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The mac filter mode (accept or deny) for the port.
| ||||
| SmaxNumOfMacFiltersInSystem | 1.3.6.1.4.1.890.1.5.5.6.10.53.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The max number of mac filters supported in the system. | ||||
| SmaxNumOfMacFiltersPerPort | 1.3.6.1.4.1.890.1.5.5.6.10.53.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The max number of mac filters supported per port. | ||||
| ScurrNumOfMacFiltersInSystem | 1.3.6.1.4.1.890.1.5.5.6.10.53.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current number of mac filters in the system. | ||||
| TmacFilterTable | 1.3.6.1.4.1.890.1.5.5.6.10.53.5 | NA | ||
table · not-accessible · current A table that contains the mac filter addresses. | ||||
| RmacFilterEntry | 1.3.6.1.4.1.890.1.5.5.6.10.53.5.1 | NA | ||
| CmacFilterAddr | 1.3.6.1.4.1.890.1.5.5.6.10.53.5.1.1 | PhysAddress | RO | |
column · PhysAddress · read-only · current The mac address which can pass through or be rejected from the port. | ||||
| CmacFilterRowStatus | 1.3.6.1.4.1.890.1.5.5.6.10.53.5.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of the entry. | ||||
| NmacfilterBatchSet | 1.3.6.1.4.1.890.1.5.5.6.10.53.6 | |||
| SmacfilterTarget | 1.3.6.1.4.1.890.1.5.5.6.10.53.6.1 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current This managed object is used for identify the target on which
the port configuration should be performed. The target is encoded as:
Byte 1: 0, Reserved(chassis)
Byte 2~3: 0, Reserved(slot)
Byte 4: 0, reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc. | ||||
| SmacfilterOps | 1.3.6.1.4.1.890.1.5.5.6.10.53.6.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: enable mac filter BIT 2: enable mac count filter BIT 3: disable mac filter BIT 4: set mac count BIT 5: disable mac count filter. | ||||
| SmacFilterMacCountForBatchSet | 1.3.6.1.4.1.890.1.5.5.6.10.53.6.3 | INTEGER (1..128) | RW | |
scalar · INTEGER (1..128) · read-write · current The total number of MAC addresses allowed for a port. | ||||
| TouiFilterTable | 1.3.6.1.4.1.890.1.5.5.6.10.53.7 | NA | ||
table · not-accessible · current A table that contains the OUI filter addresses. | ||||
| RouiFilterEntry | 1.3.6.1.4.1.890.1.5.5.6.10.53.7.1 | NA | ||
| CouiFilterAddr | 1.3.6.1.4.1.890.1.5.5.6.10.53.7.1.1 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The first three bytes of the mac address which can pass through or be rejected from the port. | ||||
| CouiFilterRowStatus | 1.3.6.1.4.1.890.1.5.5.6.10.53.7.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of the entry. | ||||
| SmaxNumOfOuiFiltersPerPort | 1.3.6.1.4.1.890.1.5.5.6.10.53.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current The max number of OUI filters supported per port. | ||||
| TouiFilterPortTable | 1.3.6.1.4.1.890.1.5.5.6.10.53.9 | NA | ||
table · not-accessible · current This table includes the status of oui filtering for each port. | ||||
| RouiFilterPortEntry | 1.3.6.1.4.1.890.1.5.5.6.10.53.9.1 | NA | ||
| CouiFilterPortEnable | 1.3.6.1.4.1.890.1.5.5.6.10.53.9.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable oui filtering for the port.
| ||||
| CouiFilterPortFilterMode | 1.3.6.1.4.1.890.1.5.5.6.10.53.9.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The oui filter mode (accept or deny) for the port.
| ||||
| NdhcpSnoop | 1.3.6.1.4.1.890.1.5.5.6.10.55 | |||
| TdhcpSnoopPortTable | 1.3.6.1.4.1.890.1.5.5.6.10.55.1 | NA | ||
table · not-accessible · current This table includes DHCP snooping enable/disable for each port. | ||||
| RdhcpSnoopPortEntry | 1.3.6.1.4.1.890.1.5.5.6.10.55.1.1 | NA | ||
| CdhcpSnoopEnable | 1.3.6.1.4.1.890.1.5.5.6.10.55.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable DHCP snooping for a port.
| ||||
| SdhcpSnoopTarget | 1.3.6.1.4.1.890.1.5.5.6.10.55.2 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current This managed object is used for identify the target on which
the operation should be performed. The target is encoded as:
Byte 1: the octet specifies a set of eight chassis, chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc. | ||||
| SdhcpSnoopOps | 1.3.6.1.4.1.890.1.5.5.6.10.55.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current The corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: DHCP snooping table flush. | ||||
| TdhcpStaticTable | 1.3.6.1.4.1.890.1.5.5.6.10.55.4 | NA | ||
table · not-accessible · current This table defines DHCP static IP addresses. | ||||
| RdhcpStaticEntry | 1.3.6.1.4.1.890.1.5.5.6.10.55.4.1 | NA | ||
| CdhcpStaticIpAddr | 1.3.6.1.4.1.890.1.5.5.6.10.55.4.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address which can pass through the port. | ||||
| CdhcpStaticRowStatus | 1.3.6.1.4.1.890.1.5.5.6.10.55.4.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current Row status of the table entry. | ||||
| SmaxNumOfDhcpStaticIp | 1.3.6.1.4.1.890.1.5.5.6.10.55.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of DHCP static IP addresses which can be created for a port. | ||||
| SdhcpSnoopLan2lanEnable | 1.3.6.1.4.1.890.1.5.5.6.10.55.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/disable DHCP snoop lan2lan function.
| ||||
| Nacl | 1.3.6.1.4.1.890.1.5.5.6.10.56 | |||
| TaclSetTable | 1.3.6.1.4.1.890.1.5.5.6.10.56.1 | NA | ||
table · not-accessible · current aclsetTable. | ||||
| RaclSetEntry | 1.3.6.1.4.1.890.1.5.5.6.10.56.1.1 | NA | ||
row · not-accessible · current An entry of aclSetTable.
| ||||
| CaclSetVpi | 1.3.6.1.4.1.890.1.5.5.6.10.56.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current VPI value | ||||
| CaclSetVci | 1.3.6.1.4.1.890.1.5.5.6.10.56.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current VCI value | ||||
| CaclSetProfileName | 1.3.6.1.4.1.890.1.5.5.6.10.56.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current ACL Profile name | ||||
| CaclSetRowStatus | 1.3.6.1.4.1.890.1.5.5.6.10.56.1.1.4 | RowStatus | RW | |
column · RowStatus · read-write · current RowStatus of aclSetEntry | ||||
| TaclProfileTable | 1.3.6.1.4.1.890.1.5.5.6.10.56.2 | NA | ||
table · not-accessible · current aclProfileTable. | ||||
| RaclProfileEntry | 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1 | NA | ||
| CaclProfileRuleName | 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.1 | DisplayString | RO | |
column · DisplayString · read-only · current Profile rule name | ||||
| CaclProfileRuleNumber | 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The managed object is for acl profile rule configuration.
etype <etype> vlan <vid> (1),
etype <etype> smac <mac> (2),
etype <etype> dmac <mac> (3),
vlan <vid> smac <mac> (4),
vlan <vid> dmac <mac> (5),
smac <mac> dmac <mac> (6),
vlan <vid> priority <priority> (7),
etype <etype> (8),
vlan <vid> (9),
smac <mac> (10),
dmac <mac> (11),
priority <priority> (12),
protocol <protocol> (13),
{srcip <ip>/<mask>{|dstip <ip>/<mask>{|tos <stos> <etos>{|srcport <sport> <eport> {|dstport <sport> <eport>}}}}} (14) | ||||
| CaclProfileActionNumber | 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Profile action number. Bit 1: rate Bit 2: rvlan Bit 3: rpri Bit 4: deny Bit 1, Bit 2 & Bit 3 can multiple selection. | ||||
| CaclProfileRuleParamMask | 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Profile rule parameter mask. BIT 1: srcip <ip>/<mask> BIT 2: dstip <ip>/<mask> BIT 3: tos <stos> <etos> BIT 4: srcport <sport> <eport> BIT 5: dstport <sport> <eport> | ||||
| CaclProfileRuleEtype | 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.5 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current Profile rule etype | ||||
| CaclProfileRuleVid | 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.6 | INTEGER (1..4094) | RW | |
column · INTEGER (1..4094) · read-write · current Profile rule vid | ||||
| CaclProfileRuleSmac | 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.7 | PhysAddress | RW | |
column · PhysAddress · read-write · current Profile rule source MAC | ||||
| CaclProfileRuleDmac | 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.8 | PhysAddress | RW | |
column · PhysAddress · read-write · current Profile rule destination MAC | ||||
| CaclProfileRulePriority | 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.9 | INTEGER (1..7) | RW | |
column · INTEGER (1..7) · read-write · current Profile rule priority | ||||
| CaclProfileRuleProtocol | 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.10 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current Profile rule protocol. icmp(1),igmp(2),ip(4),tcp(6), udp(17),gre(47),ospf(89), other ptype | ||||
| CaclProfileRuleSrcIP | 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.11 | IpAddress | RW | |
column · IpAddress · read-write · current Profile rule source IP | ||||
| CaclProfileRuleSrcIPMask | 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.12 | INTEGER (0..32) | RW | |
column · INTEGER (0..32) · read-write · current The subnet mask of source IP mask | ||||
| CaclProfileRuleDestIP | 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.13 | IpAddress | RW | |
column · IpAddress · read-write · current Profile rule source IP | ||||
| CaclProfileRuleDestIPMask | 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.14 | INTEGER (0..32) | RW | |
column · INTEGER (0..32) · read-write · current The subnet mask of dest IP mask | ||||
| CaclProfileRuleStartTos | 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.15 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current Profile rule start type of service | ||||
| CaclProfileRuleEndTos | 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.16 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current Profile rule end type of service | ||||
| CaclProfileRuleSrcStartPort | 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.17 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current Profile rule source start port | ||||
| CaclProfileRuleSrcEndPort | 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.18 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current Profile rule source end port | ||||
| CaclProfileRuleDestStartPort | 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.19 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current Profile rule destination start port | ||||
| CaclProfileRuleDestEndPort | 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.20 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current Profile rule destination end port | ||||
| CaclProfileActionRate | 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.21 | INTEGER (1..65535) | RW | |
column · INTEGER (1..65535) · read-write · current Profile action to replace to this rate | ||||
| CaclProfileActionrvlan | 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.22 | INTEGER (1..4094) | RW | |
column · INTEGER (1..4094) · read-write · current Profile action to replace to this vlan | ||||
| CaclProfileActionrpri | 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.23 | INTEGER (1..7) | RW | |
column · INTEGER (1..7) · read-write · current Profile action to replace to this priority | ||||
| CaclProfileRowStatus | 1.3.6.1.4.1.890.1.5.5.6.10.56.2.1.24 | RowStatus | RW | |
column · RowStatus · read-write · current The row status of the entry. | ||||
| NpppoeAgent | 1.3.6.1.4.1.890.1.5.5.6.10.57 | |||
| TpppoeAgentTable | 1.3.6.1.4.1.890.1.5.5.6.10.57.1 | NA | ||
table · not-accessible · current A table that contains PPPoE DHCP Relay configuration. | ||||
| RpppoeAgentEntry | 1.3.6.1.4.1.890.1.5.5.6.10.57.1.1 | NA | ||
| CpppoeAgentEnable | 1.3.6.1.4.1.890.1.5.5.6.10.57.1.1.1 | INTEGER | RC | |
column · INTEGER · read-create · current Enable/disable DHCP relay and Option82 function.
| ||||
| CpppoeAgentInfo | 1.3.6.1.4.1.890.1.5.5.6.10.57.1.1.2 | DisplayString (SIZE (0..23)) | RC | |
column · DisplayString (SIZE (0..23)) · read-create · current User specific Option82 information. | ||||
| CpppoeAgentRowStatus | 1.3.6.1.4.1.890.1.5.5.6.10.57.1.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Row status of the table entry. | ||||
| CpppoeAgentOptionMode | 1.3.6.1.4.1.890.1.5.5.6.10.57.1.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Option82 format.
| ||||
| SmaxNumOfPppoeAgentConf | 1.3.6.1.4.1.890.1.5.5.6.10.57.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of rows that can be created in pppoeAgentTable. | ||||
| Nsys | 1.3.6.1.4.1.890.1.5.5.6.11 | |||
| NaccessCtrl | 1.3.6.1.4.1.890.1.5.5.6.11.5 | |||
| TsecuredClientTable | 1.3.6.1.4.1.890.1.5.5.6.11.5.2 | NA | ||
table · not-accessible · current A table that contains information about secured clients. | ||||
| RsecuredClientEntry | 1.3.6.1.4.1.890.1.5.5.6.11.5.2.1 | NA | ||
| CsecuredClientIndex | 1.3.6.1.4.1.890.1.5.5.6.11.5.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The index of the entry. | ||||
| CsecuredClientStartIp | 1.3.6.1.4.1.890.1.5.5.6.11.5.2.1.2 | IpAddress | RW | |
column · IpAddress · read-write · current The starting IP address of the secured client set. | ||||
| CsecuredClientEndIp | 1.3.6.1.4.1.890.1.5.5.6.11.5.2.1.3 | IpAddress | RW | |
column · IpAddress · read-write · current The ending IP address of the secured client set. | ||||
| CsecuredClientService | 1.3.6.1.4.1.890.1.5.5.6.11.5.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Each bit corresponds to a service. The bit is set to 1 if the service is enabled, and set to 0 if the service is disabled. The various bit positions are: BIT 1: telnet BIT 2: ftp BIT 3: web BIT 4: icmp BIT 5: ssh BIT 6: snmp. | ||||
| CsecuredClientEnable | 1.3.6.1.4.1.890.1.5.5.6.11.5.2.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable the entry.
| ||||
| NextAlarm | 1.3.6.1.4.1.890.1.5.5.6.11.8 | |||
| TextAlarmTable | 1.3.6.1.4.1.890.1.5.5.6.11.8.1 | NA | ||
table · not-accessible · current A table that contains external alarm information. | ||||
| RextAlarmEntry | 1.3.6.1.4.1.890.1.5.5.6.11.8.1.1 | NA | ||
| CextAlarmIndex | 1.3.6.1.4.1.890.1.5.5.6.11.8.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The index of the entry. | ||||
| CextAlarmname | 1.3.6.1.4.1.890.1.5.5.6.11.8.1.1.2 | DisplayString (SIZE (1..31)) | RW | |
column · DisplayString (SIZE (1..31)) · read-write · current The external alarm name. | ||||
| CextAlarmstatus | 1.3.6.1.4.1.890.1.5.5.6.11.8.1.1.3 | DisplayString (SIZE (1..31)) | RO | |
column · DisplayString (SIZE (1..31)) · read-only · current Dispaly 'Normal' or 'Alarm' string | ||||
| Nuser | 1.3.6.1.4.1.890.1.5.5.6.11.9 | |||
| SuserAuthMode | 1.3.6.1.4.1.890.1.5.5.6.11.9.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current User authentication procsssing mode.
| ||||
| SuserAuthServerIp | 1.3.6.1.4.1.890.1.5.5.6.11.9.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of the authentication server. | ||||
| SuserAuthServerPort | 1.3.6.1.4.1.890.1.5.5.6.11.9.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current The port of the authentication server. | ||||
| SuserAuthServerSecret | 1.3.6.1.4.1.890.1.5.5.6.11.9.4 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The secret between the authentication server and the NE for authentication process. | ||||
| TuserTable | 1.3.6.1.4.1.890.1.5.5.6.11.9.5 | NA | ||
table · not-accessible · current A table that contains user information. | ||||
| RuserEntry | 1.3.6.1.4.1.890.1.5.5.6.11.9.5.1 | NA | ||
| CuserName | 1.3.6.1.4.1.890.1.5.5.6.11.9.5.1.1 | DisplayString | RO | |
column · DisplayString · read-only · current The user name. | ||||
| CuserPassword | 1.3.6.1.4.1.890.1.5.5.6.11.9.5.1.2 | DisplayString | RC | |
column · DisplayString · read-create · current The user password. | ||||
| CuserPriviledge | 1.3.6.1.4.1.890.1.5.5.6.11.9.5.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The user priviledge to decide what operation the user can and cannot do.
| ||||
| CuserRowStatus | 1.3.6.1.4.1.890.1.5.5.6.11.9.5.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The row status used to create or delete a user. | ||||
| SuserAuthDefaultPriviledge | 1.3.6.1.4.1.890.1.5.5.6.11.9.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current The user default priviledge to be assigned when radius authentication succeds but no user priviledge information(radius service-type) is provided.
| ||||
| SsysSlotId | 1.3.6.1.4.1.890.1.5.5.6.11.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Device slot ID(0...255). | ||||
| SstdioTimeout | 1.3.6.1.4.1.890.1.5.5.6.11.12 | INTEGER (0..360) | RW | |
scalar · INTEGER (0..360) · read-write · current Set the stdio timeout, 0~360 minutes. | ||||
| Ntrap | 1.3.6.1.4.1.890.1.5.5.6.12 | |||
| Nobject | 1.3.6.1.4.1.890.1.5.5.6.12.1 | |||
| SeqptAlarmInputIndex | 1.3.6.1.4.1.890.1.5.5.6.12.1.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The index of alarm input. | ||||
| SeqptAlarmInputName | 1.3.6.1.4.1.890.1.5.5.6.12.1.8 | DisplayString | RO | |
scalar · DisplayString · read-only · current The Name of alarm input. | ||||
| SsysMacAntiSpoofOrig | 1.3.6.1.4.1.890.1.5.5.6.12.1.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current The Original port of Mac-AntiSpoofing. | ||||
| SsysMacAntiSpoofNew | 1.3.6.1.4.1.890.1.5.5.6.12.1.10 | INTEGER | RO | |
scalar · INTEGER · read-only · current The New port of Mac-AntiSpoofing. | ||||
| SsysMacAntiSpoofMAC | 1.3.6.1.4.1.890.1.5.5.6.12.1.11 | DisplayString | RO | |
scalar · DisplayString · read-only · current The MAC of Mac-AntiSpoofing. | ||||
| Nequipment | 1.3.6.1.4.1.890.1.5.5.6.12.3 | |||
| !eqptHWMonitorFailure | 1.3.6.1.4.1.890.1.5.5.6.12.3.1 | |||
notification · current Hardware monitor diagnosis is failed. | ||||
| Nsystrap | 1.3.6.1.4.1.890.1.5.5.6.12.4 | |||
| !sysMacAntiSpoofing | 1.3.6.1.4.1.890.1.5.5.6.12.4.1 | |||
notification · current MAC Anti-spoofing. | ||||
| !sysAlarmCutoffEnable | 1.3.6.1.4.1.890.1.5.5.6.12.4.2 | |||
notification · current Alarm cutoff is activated. | ||||
| !sysAlarmClearEnable | 1.3.6.1.4.1.890.1.5.5.6.12.4.3 | |||
notification · current Alarm clear is activated. | ||||
| !sysLoginFailure | 1.3.6.1.4.1.890.1.5.5.6.12.4.4 | |||
notification · current User login is failed. | ||||
| Nstatistics | 1.3.6.1.4.1.890.1.5.5.6.13 | |||
| SigmpQueryCntTotal | 1.3.6.1.4.1.890.1.5.5.6.13.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of IGMP query messages received. | ||||
| SigmpReportCntTotal | 1.3.6.1.4.1.890.1.5.5.6.13.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of IGMP report messages received. | ||||
| SigmpLeaveCntTotal | 1.3.6.1.4.1.890.1.5.5.6.13.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of IGMP leave messages received. | ||||
| SigmpNumOfActiveGroups | 1.3.6.1.4.1.890.1.5.5.6.13.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current The total number of IGMP learned groups. | ||||
| TigmpGroupTable | 1.3.6.1.4.1.890.1.5.5.6.13.5 | NA | ||
table · not-accessible · current This table includes igmp group information. | ||||
| RigmpGroupEntry | 1.3.6.1.4.1.890.1.5.5.6.13.5.1 | NA | ||
| CigmpGroupIp defined twice | 1.3.6.1.4.1.890.1.5.5.6.13.5.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current igmp group IP | ||||
| CigmpGroupvid | 1.3.6.1.4.1.890.1.5.5.6.13.5.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current vlan id | ||||
| CigmpGroupnumberOfMembers | 1.3.6.1.4.1.890.1.5.5.6.13.5.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current number Of Members | ||||
| CigmpGroupMemberPorts defined twice | 1.3.6.1.4.1.890.1.5.5.6.13.5.1.4 | PortList | RO | |
column · PortList · read-only · current Group Member Ports | ||||
| TigmpGroupPortTable | 1.3.6.1.4.1.890.1.5.5.6.13.6 | NA | ||
table · not-accessible · current This table includes igmp Group port information. | ||||
| RigmpGroupPortEntry | 1.3.6.1.4.1.890.1.5.5.6.13.6.1 | NA | ||
row · not-accessible · current An entry in igmpGroupPortTable. | ||||
| CigmpGroupPortIp defined twice | 1.3.6.1.4.1.890.1.5.5.6.13.6.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current Igmp Group IP | ||||
| CigmpGroupPortvid | 1.3.6.1.4.1.890.1.5.5.6.13.6.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Igmp Group vid | ||||
| TigmpGroupTableV2 | 1.3.6.1.4.1.890.1.5.5.6.13.7 | NA | ||
table · not-accessible · current A table that displays IGMP learned group member information. | ||||
| RigmpGroupEntryV2 | 1.3.6.1.4.1.890.1.5.5.6.13.7.1 | NA | ||
| CigmpGroupVid | 1.3.6.1.4.1.890.1.5.5.6.13.7.1.1 | VlanIndex | RO | |
column · VlanIndex · read-only · current The IGMP group VLAN ID. | ||||
| SigmpGroupIp defined twice | 1.3.6.1.4.1.890.1.5.5.6.13.7.1.2 | IpAddress | RO | |
scalar · IpAddress · read-only · current igmp group IP | ||||
| CigmpGroupNumOfMembers | 1.3.6.1.4.1.890.1.5.5.6.13.7.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The number of member ports in the group. | ||||
| SigmpGroupMemberPorts defined twice | 1.3.6.1.4.1.890.1.5.5.6.13.7.1.4 | PortList | RO | |
scalar · PortList · read-only · current Group Member Ports | ||||
| TigmpGroupPortTableV2 | 1.3.6.1.4.1.890.1.5.5.6.13.8 | NA | ||
table · not-accessible · current A table that displays IGMP joined groups in this port. | ||||
| RigmpGroupPortEntryV2 | 1.3.6.1.4.1.890.1.5.5.6.13.8.1 | NA | ||
row · not-accessible · current An entry of igmpGroupPortTableV2. | ||||
| CigmpGroupPortVid | 1.3.6.1.4.1.890.1.5.5.6.13.8.1.1 | VlanIndex | RO | |
column · VlanIndex · read-only · current The IGMP group VLAN ID. | ||||
| SigmpGroupPortIp defined twice | 1.3.6.1.4.1.890.1.5.5.6.13.8.1.2 | IpAddress | RO | |
scalar · IpAddress · read-only · current Igmp Group IP | ||||
| CigmpGroupPortSourceIp | 1.3.6.1.4.1.890.1.5.5.6.13.8.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The source IP address that joins the IGMP group. | ||||
| TigmpPortCtrlPduTable | 1.3.6.1.4.1.890.1.5.5.6.13.9 | NA | ||
table · not-accessible · current A table that displays IGMP related counter values in this port. | ||||
| RigmpPortCtrlPduEntry | 1.3.6.1.4.1.890.1.5.5.6.13.9.1 | NA | ||
| CigmpPortCtrlPduQueryCnt | 1.3.6.1.4.1.890.1.5.5.6.13.9.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP query messages received in this port. | ||||
| CigmpPortCtrlPduReportCnt | 1.3.6.1.4.1.890.1.5.5.6.13.9.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP report messages received in this port. | ||||
| CigmpPortCtrlPduLeaveCnt | 1.3.6.1.4.1.890.1.5.5.6.13.9.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of IGMP leave messages received in this port. | ||||
| CigmpPortNumOfActiveGroups | 1.3.6.1.4.1.890.1.5.5.6.13.9.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The total number of active IGMP groups in this port. | ||||
| NdhcpStats | 1.3.6.1.4.1.890.1.5.5.6.13.11 | |||
| TdhcpSnoopIpTable | 1.3.6.1.4.1.890.1.5.5.6.13.11.1 | NA | ||
table · not-accessible · current This table shows the IP addresses and netmasks offered by the DHCP server. | ||||
| RdhcpSnoopIpEntry | 1.3.6.1.4.1.890.1.5.5.6.13.11.1.1 | NA | ||
| CdhcpSnoopIp | 1.3.6.1.4.1.890.1.5.5.6.13.11.1.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The snooped IP address. | ||||
| CdhcpSnoopMac | 1.3.6.1.4.1.890.1.5.5.6.13.11.1.1.2 | PhysAddress | RO | |
column · PhysAddress · read-only · current The snooped MAC address. | ||||
| TdhcpSnoopCounterTable | 1.3.6.1.4.1.890.1.5.5.6.13.11.2 | NA | ||
table · not-accessible · current This table shows the DHCP statistics. | ||||
| RdhcpSnoopCounterEntry | 1.3.6.1.4.1.890.1.5.5.6.13.11.2.1 | NA | ||
| CdhcpDiscovery | 1.3.6.1.4.1.890.1.5.5.6.13.11.2.1.1 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of received DHCP server discovery packets. | ||||
| CdhcpOffer | 1.3.6.1.4.1.890.1.5.5.6.13.11.2.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of received DHCP server offer packets. | ||||
| CdhcpRequest | 1.3.6.1.4.1.890.1.5.5.6.13.11.2.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of received DHCP IP request packets. | ||||
| CdhcpAck | 1.3.6.1.4.1.890.1.5.5.6.13.11.2.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of received DHCP IP acknowledge packets. | ||||
| CdhcpAckBySnoopFull | 1.3.6.1.4.1.890.1.5.5.6.13.11.2.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of received DHCP IP acknowledge packets that replace the oldest snooping entry in snooping table due to table full. | ||||
| NpaepvcStats | 1.3.6.1.4.1.890.1.5.5.6.13.12 | |||
| TpaepvcSessionTable | 1.3.6.1.4.1.890.1.5.5.6.13.12.1 | NA | ||
table · not-accessible · current This table shows the paepvc session statistics. | ||||
| RpaepvcSessionEntry | 1.3.6.1.4.1.890.1.5.5.6.13.12.1.1 | NA | ||
row · not-accessible · current An entry of paepvcSessionTable. | ||||
| CpaepvcSessionVpi | 1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The PAEPVC VPI. | ||||
| CpaepvcSessionVci | 1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The PAEPVC VCI. | ||||
| CpaepvcSessionState | 1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The PAEPVC status.
| ||||
| CpaepvcSessionId | 1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The PAEPVC session ID. | ||||
| CpaepvcSessionUptime | 1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The PAEPVC session uptime.
| ||||
| CpaepvcSessionacname | 1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Access concentrator name. | ||||
| CpaepvcSessionsrvcname | 1.3.6.1.4.1.890.1.5.5.6.13.12.1.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current Service name. | ||||
| TpaepvcCountTable | 1.3.6.1.4.1.890.1.5.5.6.13.12.2 | NA | ||
table · not-accessible · current This table shows the paepvc counters. | ||||
| RpaepvcCountEntry | 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1 | NA | ||
row · not-accessible · current An entry of paepvcCountTable.
| ||||
| CpaepvcCountVpi | 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The PAEPVC VPI. | ||||
| CpaepvcCountVci | 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The PAEPVC VCI. | ||||
| CpaepvcCountPppLcpCfgReqRx | 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of ppp lcp config-request received. | ||||
| CpaepvcCountPppLcpEchoReqRx | 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of ppp lcp echo-request received. | ||||
| CpaepvcCountPppLcpEchoReplyRx | 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of ppp lcp echo-reply received. | ||||
| CpaepvcCountPadiTx | 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe padi transfered | ||||
| CpaepvcCountPadoRx | 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe pado received | ||||
| CpaepvcCountPadrTx | 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe padr transfered | ||||
| CpaepvcCountPadsRx | 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe pads received | ||||
| CpaepvcCountPadtTx | 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.10 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe padt transfered | ||||
| CpaepvcCountPadtRx | 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe padt received | ||||
| CpaepvcCountSrvcnameErrRx | 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe service name error received | ||||
| CpaepvcCountAcSystemErrRx | 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.13 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe access concentrator name error received | ||||
| CpaepvcCountGenericErrTx | 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.14 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe generic error transfered | ||||
| CpaepvcCountGenericErrRx | 1.3.6.1.4.1.890.1.5.5.6.13.12.2.1.15 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of pppoe generic error received | ||||
| NmacStats | 1.3.6.1.4.1.890.1.5.5.6.13.13 | |||
| SmacDisplayTarget | 1.3.6.1.4.1.890.1.5.5.6.13.13.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This managed object is a filter used for identify the target from which the MAC addresses are learned in macTable. The target could be: 99: all ports in the system 98: all subscriber ports 97: all Ethernet ports IfIndex is used for identifying subscriber ports and Ethernet Ports(e.g. 1 ~ 50). | ||||
| TmacTable | 1.3.6.1.4.1.890.1.5.5.6.13.13.2 | NA | ||
table · not-accessible · current A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame. | ||||
| RmacEntry | 1.3.6.1.4.1.890.1.5.5.6.13.13.2.1 | NA | ||
| CmacAddress | 1.3.6.1.4.1.890.1.5.5.6.13.13.2.1.1 | MacAddress | RO | |
column · MacAddress · read-only · current A unicast MAC address for which the bridge has forwarding and/or filtering information. | ||||
| CmacPort | 1.3.6.1.4.1.890.1.5.5.6.13.13.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The port from which the mac address has been learned. | ||||
| CmacStatus | 1.3.6.1.4.1.890.1.5.5.6.13.13.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The status of this entry.
| ||||
| NshdslStats | 1.3.6.1.4.1.890.1.5.5.6.13.14 | |||
| TshdslLinePerfTable | 1.3.6.1.4.1.890.1.5.5.6.13.14.1 | NA | ||
table · not-accessible · current The table displays SHDSL line performance. | ||||
| RshdslLinePerfEntry | 1.3.6.1.4.1.890.1.5.5.6.13.14.1.1 | NA | ||
| CshdslLinePerfEs | 1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current Count of Errored Seconds (ES) on this endpoint since link up. | ||||
| CshdslLinePerfSes | 1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current Count of Severely Errored Seconds (SES) on this endpoint since link up. | ||||
| CshdslLinePerfCrc | 1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current Count of CRC anomalies on this endpoint since link up. | ||||
| CshdslLinePerfLosws | 1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current Count of Loss of Sync Word (LOSW) Seconds on this endpoint since link up. | ||||
| CshdslLinePerfUas | 1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current Count of Unavailable Seconds (UAS) on this endpoint since link up. | ||||
| CshdslLinePerfSegmentAnomalies | 1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current Count of Segment Anomalies on this endpoint since link up. | ||||
| CshdslLinePerfSegmentDefect | 1.3.6.1.4.1.890.1.5.5.6.13.14.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current Count of Segment Defects on this endpoint since link up. | ||||
| NgbondStats | 1.3.6.1.4.1.890.1.5.5.6.13.51 | |||
| TgbondStateTable | 1.3.6.1.4.1.890.1.5.5.6.13.51.1 | NA | ||
table · not-accessible · current A table containing the G.Bond configuration information for each bonding group of the device. | ||||
| RgbondStateEntry | 1.3.6.1.4.1.890.1.5.5.6.13.51.1.1 | NA | ||
| CgbondStateName | 1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.1 | OCTET STRING (SIZE (0..31)) | RO | |
column · OCTET STRING (SIZE (0..31)) · read-only · current An administratively assigned string, which identifies the bonding group. | ||||
| CgbondStateSid | 1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the sequence index mode of the bonding group.
| ||||
| CgbondStateUpRate | 1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The current up stream rate. | ||||
| CgbondStateDownRate | 1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The current down stream rate. | ||||
| CgbondStateMember | 1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Indicate if the port is a member port of the bonding group.
The target is encoded
as:
Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5: Each bit in the octet specifies a port from MSB to LSB.
for example: 32(hex) = 50(dec) = 00110010(bin) means the port 3, 4 and 7. | ||||
| CgbondStatelinkup | 1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Indicate if the link status of port is bidirectional.
The target is encoded
as:
Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5: Each bit in the octet specifies a port from MSB to LSB.
for example: 32(hex) = 50(dec) = 00110010(bin) means the port 3, 4 and 7. | ||||
| CgbondStateTx | 1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.7 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Indicate if the link status of port is Tx only.
The target is encoded
as:
Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5: Each bit in the octet specifies a port from MSB to LSB.
for example: 32(hex) = 50(dec) = 00110010(bin) means the port 3, 4 and 7. | ||||
| CgbondStateRx | 1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.8 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Indicate if the link status of port is Rx only.
The target is encoded
as:
Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5: Each bit in the octet specifies a port from MSB to LSB.
for example: 32(hex) = 50(dec) = 00110010(bin) means the port 3, 4 and 7. | ||||
| CgbondStatelinkdown | 1.3.6.1.4.1.890.1.5.5.6.13.51.1.1.9 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Indicate if the link status of the port is down.
The target is encoded
as:
Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7
Byte 2~3: each octet specifies a set of eight slots, with the
first octet specifying slots 1 through 8 and the second
octet specifying slots 9 through 16.
Byte 4: reserved
Byte 5: Each bit in the octet specifies a port from MSB to LSB.
for example: 32(hex) = 50(dec) = 00110010(bin) means the port 3, 4 and 7. | ||||
| Nclear | 1.3.6.1.4.1.890.1.5.5.6.14 | |||
| ScounterClearTarget | 1.3.6.1.4.1.890.1.5.5.6.14.1 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current This managed object is used for identify the target on which
the counter would be cleared. The target is encoded as:
Byte 1: reserved
Byte 2~3: reserved
Byte 4: reserved
Byte 5~11:each octet specifies a set of eight ports, with the first
octet specifying ports 1 through 8, etc. | ||||
| ScounterClearOps | 1.3.6.1.4.1.890.1.5.5.6.14.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: clear interface counters BIT 2: clear pvc packet counters BIT 3: clear port ATM counters BIT 4: clear pvc ATM counters BIT 5: clear DHCP counters BIT 6: clear IGMP counters BIT 7: clear IGMP port counters | ||||
| ScounterClearVpi | 1.3.6.1.4.1.890.1.5.5.6.14.3 | INTEGER (0..255) | RW | |
scalar · INTEGER (0..255) · read-write · current VPI of the pvc whose counters would be cleared. | ||||
| ScounterClearVci | 1.3.6.1.4.1.890.1.5.5.6.14.4 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current VCI of the pvc whose counters would be cleared. | ||||
Traps / Notifications
- eqptHWMonitorFailure
1.3.6.1.4.1.890.1.5.5.6.12.3.1 - sysAlarmClearEnable
1.3.6.1.4.1.890.1.5.5.6.12.4.3 - sysAlarmCutoffEnable
1.3.6.1.4.1.890.1.5.5.6.12.4.2 - sysLoginFailure
1.3.6.1.4.1.890.1.5.5.6.12.4.4 - sysMacAntiSpoofing
1.3.6.1.4.1.890.1.5.5.6.12.4.1