ZYXEL-AESCOMMON-MIB
ZyXEL Communications Corp.snmptranslate -m ZYXEL-AESCOMMON-MIB -Tpsnmpwalk -v2c -c <community> -m ZYXEL-AESCOMMON-MIB <host> 1.3.6.1.4.1.890.1.5.11.1.1Imports
| IF-MIB | ifIndex |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
| ZYXEL-MIB | aesSeriesCommon |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| SaesMaxNumOfProfiles | 1.3.6.1.4.1.890.1.5.11.1.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The maximum number of ADSL profiles which the system supports. | ||||
| TaesLineConfTable | 1.3.6.1.4.1.890.1.5.11.1.2 | NA | mandatory | |
table · not-accessible · mandatory This table includes common attributes describing the ADSL line. | ||||
| RaesLineConfEntry | 1.3.6.1.4.1.890.1.5.11.1.2.1 | NA | mandatory | |
| CaesLineConfAdslMode | 1.3.6.1.4.1.890.1.5.11.1.2.1.1 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The mode of the ADSL line.
| ||||
| CaesLineConfEncap | 1.3.6.1.4.1.890.1.5.11.1.2.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The encapsulation of the ADSL line.
| ||||
| CaesLineConfVpi | 1.3.6.1.4.1.890.1.5.11.1.2.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The VPI of the ADSL line. | ||||
| CaesLineConfVci | 1.3.6.1.4.1.890.1.5.11.1.2.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The VCI of the ADSL line. | ||||
| CaesLineConfAnnexL | 1.3.6.1.4.1.890.1.5.11.1.2.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The annex L setting of the ADSL line(Only in AnnexA).
| ||||
| CaesLineConfPmMode | 1.3.6.1.4.1.890.1.5.11.1.2.1.6 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The power management mode of the ADSL line.
| ||||
| CaesLineConfRateMode | 1.3.6.1.4.1.890.1.5.11.1.2.1.7 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information.
| ||||
| CaesLineConfAnnexM | 1.3.6.1.4.1.890.1.5.11.1.2.1.8 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The annex M setting of the ADSL line.
| ||||
| NaesLineDiagnostic | 1.3.6.1.4.1.890.1.5.11.1.3 | |||
| SaesAtucLineDiagLATN | 1.3.6.1.4.1.890.1.5.11.1.3.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Line Attenuation.
| ||||
| SaesAtucLineDiagSATN | 1.3.6.1.4.1.890.1.5.11.1.3.2 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Signal Attenuation.
| ||||
| SaesAtucLineDiagSNRM | 1.3.6.1.4.1.890.1.5.11.1.3.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Signal-to-Noise Ratio Margin.
| ||||
| SaesAtucLineDiagACTATP | 1.3.6.1.4.1.890.1.5.11.1.3.4 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Actual Aggregate Transmit Power.
| ||||
| SaesAtucLineDiagATTNDR | 1.3.6.1.4.1.890.1.5.11.1.3.5 | Unsigned32 | RO | mandatory |
scalar · Unsigned32 · read-only · mandatory Attainable Net Data Rate, in bps. | ||||
| SaesAturLineDiagLATN | 1.3.6.1.4.1.890.1.5.11.1.3.6 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Line Attenuation.
| ||||
| SaesAturLineDiagSATN | 1.3.6.1.4.1.890.1.5.11.1.3.7 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Signal Attenuation.
| ||||
| SaesAturLineDiagSNRM | 1.3.6.1.4.1.890.1.5.11.1.3.8 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Signal-to-Noise Ratio Margin.
| ||||
| SaesAturLineDiagACTATP | 1.3.6.1.4.1.890.1.5.11.1.3.9 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Actual Aggregate Transmit Power.
| ||||
| SaesAturLineDiagATTNDR | 1.3.6.1.4.1.890.1.5.11.1.3.10 | Unsigned32 | RO | mandatory |
scalar · Unsigned32 · read-only · mandatory Attainable Net Data Rate, in bps. | ||||
| SaesLineDiagTarget | 1.3.6.1.4.1.890.1.5.11.1.3.11 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Ifindex of the ADSL port which will be diagnosed. | ||||
| SaesLineDiagOps | 1.3.6.1.4.1.890.1.5.11.1.3.12 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The manager sets the object to one to start line diagnostics and the agent clears the object to zero when diagnostics is successfully completed. | ||||
| SaesLineDiagFailReason | 1.3.6.1.4.1.890.1.5.11.1.3.13 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory The reason of failed diagnostics. | ||||
| NaesLineDiagPs | 1.3.6.1.4.1.890.1.5.11.1.4 | |||
| SaesAtucNumOfSubcarriersPerPort | 1.3.6.1.4.1.890.1.5.11.1.4.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of subcarriers per port for ATU-C. | ||||
| SaesAturNumOfSubcarriersPerPort | 1.3.6.1.4.1.890.1.5.11.1.4.2 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of subcarriers per port for ATU-R. | ||||
| SaesLineDiagPsCCFLirl1 | 1.3.6.1.4.1.890.1.5.11.1.4.3 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory Channel Characteristics Function H(f) per subcarrier. The value is the real part of a complex value in liner scale. The first two octets specify the li.rl value for subcarrier 1, and the second two octets specify the li.rl value for subcarrier 2, and so on. The object provides li.rl values for subcarrier 1 to 256. | ||||
| SaesLineDiagPsCCFLirl2 | 1.3.6.1.4.1.890.1.5.11.1.4.4 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory Channel Characteristics Function H(f) per subcarrier. The value is the real part of a complex value in liner scale. The first two octets specify the li.rl value for subcarrier 257, and the second two octets specify the li.rl value for subcarrier 258, and so on. The object provides li.rl values for subcarrier 257 to 512. | ||||
| SaesLineDiagPsCCFLiim1 | 1.3.6.1.4.1.890.1.5.11.1.4.5 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory Channel Characteristics Function H(f) per subcarrier. The value is the image part of a complex value in liner scale. The first two octets specify the li.im value for subcarrier 1, and the second two octets specify the li.im value for subcarrier 2, and so on. The object provides li.im values for subcarrier 1 to 256. | ||||
| SaesLineDiagPsCCFLiim2 | 1.3.6.1.4.1.890.1.5.11.1.4.6 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory Channel Characteristics Function H(f) per subcarrier. The value is the image part of a complex value in liner scale. The first two octets specify the li.im value for subcarrier 257, and the second two octets specify the li.im value for subcarrier 258, and so on. The object provides li.im values for subcarrier 257 to 512. | ||||
| SaesLineDiagPsCCFLog1 | 1.3.6.1.4.1.890.1.5.11.1.4.7 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory Channel Characteristics Function H(f) per subcarrier. The value provides magnitude value in a logarithmic scale. The first two octets specify the log value for subcarrier 1, and the second two octets specify the log value for subcarrier 2, and so on. The object provides log values for subcarrier 1 to 256. | ||||
| SaesLineDiagPsCCFLog2 | 1.3.6.1.4.1.890.1.5.11.1.4.8 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory Channel Characteristics Function H(f) per subcarrier. The value provides magnitude value in a logarithmic scale. The first two octets specify the log value for subcarrier 257, and the second two octets specify the log value for subcarrier 258, and so on. The object provides log values for subcarrier 257 to 512. | ||||
| SaesLineDiagPsQLN | 1.3.6.1.4.1.890.1.5.11.1.4.9 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory Quiet Line Noise PSD QLN(f) per subcarrier. The first octet specify QLN for subcarrier 1, and the second octet specify QLN for subcarrier 2, and so on. The object provides QLN for subcarrier 1 to 512.
| ||||
| SaesLineDiagPsSNR | 1.3.6.1.4.1.890.1.5.11.1.4.10 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory Signal-to-Noise Ratio SNR(f) per subcarrier. The first octet specify SNR for subcarrier 1, and the second octet specify SNR for subcarrier 2, and so on. The object provides SNR for subcarrier 1 to 512.
| ||||
| SaesMaxNumOfAlarmProfiles | 1.3.6.1.4.1.890.1.5.11.1.5 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The maximum number of ADSL alarm profiles which the system supports. | ||||
| TaesBitLoadingTable | 1.3.6.1.4.1.890.1.5.11.1.6 | NA | mandatory | |
table · not-accessible · mandatory This table provides the number of bits per carrier for each ADSL port. | ||||
| RaesBitLoadingEntry | 1.3.6.1.4.1.890.1.5.11.1.6.1 | NA | mandatory | |
| CaesBitLoadingBits | 1.3.6.1.4.1.890.1.5.11.1.6.1.1 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory This object provides the number of bits for all carriers in the port.
The first octet specify the number of bits for carrier 1, and the second
octet specify the number of bits for carrier 2, and so on.
The object provides the number of bits for carrier 1 to 512. | ||||
| CaesBitLoadingAtucNumOfCarriers | 1.3.6.1.4.1.890.1.5.11.1.6.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of carriers for ATU-C. | ||||
| CaesBitLoadingAturNumOfCarriers | 1.3.6.1.4.1.890.1.5.11.1.6.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of carriers for ATU-R. | ||||
| TaesLineStatusTable | 1.3.6.1.4.1.890.1.5.11.1.7 | NA | mandatory | |
table · not-accessible · mandatory This table includes the ADSL line status. | ||||
| RaesLineStatusEntry | 1.3.6.1.4.1.890.1.5.11.1.7.1 | NA | mandatory | |
| CaesLineStatusAdslMode | 1.3.6.1.4.1.890.1.5.11.1.7.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The link up mode of the ADSL line.
| ||||
| Nselt | 1.3.6.1.4.1.890.1.5.11.1.8 | |||
| SseltTarget | 1.3.6.1.4.1.890.1.5.11.1.8.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current IfIndex of the port which would be performed single end loopback test. | ||||
| SseltOps | 1.3.6.1.4.1.890.1.5.11.1.8.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The manager sets the object to 1 to start the selt and the agent clears the object to zero when selt is successfully completed. | ||||
| SseltStatus | 1.3.6.1.4.1.890.1.5.11.1.8.3 | DisplayString | RO | |
scalar · DisplayString · read-only · current Status description of the selt result. | ||||
| SseltCableType | 1.3.6.1.4.1.890.1.5.11.1.8.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current The cable type that selt result indicates.
| ||||
| SseltLoopEstimateLengthFt | 1.3.6.1.4.1.890.1.5.11.1.8.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current The estimated loop length that selt result indicates.
| ||||
| SseltLoopEstimateLengthMeter | 1.3.6.1.4.1.890.1.5.11.1.8.6 | INTEGER | RO | |
scalar · INTEGER · read-only · current The estimated loop length that selt result indicates.
| ||||