IES5206-MIB
ZyXEL Communications Corp.The file contains the private MIB defition for product IES5206/5212/6217.
snmptranslate -m IES5206-MIB -Tpsnmpwalk -v2c -c <community> -m IES5206-MIB <host> 1.3.6.1.4.1.890.1.5.13.13Imports
| BRIDGE-MIB | BridgeId, MacAddress, Timeout, dot1dBasePort |
|---|---|
| GBOND-MIB | GBondScheme, gBondPortStatEntry |
| IF-MIB | ifIndex, ifXEntry |
| INET-ADDRESS-MIB | InetAddress, InetAddressIPv6, InetAddressType |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | PortList, VlanIndex, dot1qVlanIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| VDSL2-LINE-MIB | xdsl2ChannelStatusEntry, xdsl2LineAlarmConfProfileEntry, xdsl2LineBandEntry, xdsl2LineConfProfEntry, xdsl2PMChCurrEntry, xdsl2PMLineCurrEntry, xdsl2PMLineInitCurrEntry |
| VDSL2-LINE-TC-MIB | Xdsl2Unit |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nzyxel | 1.3.6.1.4.1.890 | ||||||||||||||||||||
| Nproducts | 1.3.6.1.4.1.890.1 | ||||||||||||||||||||
| NaccessSwitch | 1.3.6.1.4.1.890.1.5 | ||||||||||||||||||||
| NiesSeries | 1.3.6.1.4.1.890.1.5.13 | ||||||||||||||||||||
| Iies5206 | 1.3.6.1.4.1.890.1.5.13.13 | ||||||||||||||||||||
identity The file contains the private MIB defition for product IES5206/5212/6217. | |||||||||||||||||||||
| Nacl | 1.3.6.1.4.1.890.1.5.13.13.1 | ||||||||||||||||||||
| SaclMaxNumOfAclPerPort | 1.3.6.1.4.1.890.1.5.13.13.1.3 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The maximum number of ACL per port. | |||||||||||||||||||||
| TaclPortTable | 1.3.6.1.4.1.890.1.5.13.13.1.4 | NA | |||||||||||||||||||
table · not-accessible · current Configures references to specified ACL rule for the specified port. | |||||||||||||||||||||
| RaclPortEntry | 1.3.6.1.4.1.890.1.5.13.13.1.4.1 | NA | |||||||||||||||||||
row · not-accessible · current A table entry to assign an interface port with ACL profile. | |||||||||||||||||||||
| CaclPortProfileName | 1.3.6.1.4.1.890.1.5.13.13.1.4.1.1 | DisplayString (SIZE (1..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (1..31)) · read-only · current Configures references to specified ACL rule. | |||||||||||||||||||||
| CaclPortRowStatus | 1.3.6.1.4.1.890.1.5.13.13.1.4.1.2 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| CaclPortProfilePriority | 1.3.6.1.4.1.890.1.5.13.13.1.4.1.3 | INTEGER (0..8) | RO | ||||||||||||||||||
column · INTEGER (0..8) · read-only · current Configures priority of specified ACL rule in this port. ACL rules in a port can not assign to same priority(per-port mode). If priority is 0, it mean no priority(per-profile mode). | |||||||||||||||||||||
| SaclMaxNumOfAclProfiles | 1.3.6.1.4.1.890.1.5.13.13.1.5 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The maximum number of ACL profiles supported by the system. | |||||||||||||||||||||
| TaclProfileTable | 1.3.6.1.4.1.890.1.5.13.13.1.6 | NA | |||||||||||||||||||
table · not-accessible · current Configures ACL profile. | |||||||||||||||||||||
| RaclProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.1.6.1 | NA | |||||||||||||||||||
| CaclProfileName | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.1 | DisplayString (SIZE (1..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (1..31)) · read-only · current Name of ACL profile. | |||||||||||||||||||||
| CaclProfileFieldMask | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.3 | Bits | RC | ||||||||||||||||||
column · Bits · read-create · current Defines the compared fields mask for the ACL profile. Every field mask bit has its own referenced field parameter(s). etherType(0) - aclProfileRuleEtype sourceMac(1) - aclProfileRuleSrcMac destMac(2) - aclProfileRuleDestMac sourceOui(3) - aclProfileRuleSrcOui destOui(4) - aclProfileRuleDestOui innerVlan(5) - aclProfileRuleInnerVlan outerVlan(6) - aclProfileRuleOuterVlan innerPbit(7) - aclProfileRuleInnerPbit outerPbit(8) - aclProfileRuleOuterPbit sourceIpRange(9) - aclProfileRuleSrcIpRange, aclProfileRuleSrcIpMask destIpRange(10) - aclProfileRuleDestIpRange, aclProfileRuleDestIpMask sourceIp(11) - aclProfileRuleSrcIp destIp(12) - aclProfileRuleDestIp protocol(13) - aclProfileRuleProtocol ipPrecedence(14) - aclProfileRuleIpPrecedence dscp(15) - aclProfileRuleDscp sourceIpv6(16) - sourceIpv6 destIpv6(17) - aclProfileRuleDestIpv6 nextHeader(18) - aclProfileRuleNextHeader trafficClass(19) - aclProfileRuleTrafficClass sourceL4PortRange(20) - aclProfileRuleSrcL4StartPort, aclProfileRuleSrcL4EndPort destL4PortRange(21) - aclProfileRuleDestL4StartPort, aclProfileRuleDestL4EndPort sourceL4Port(22) - aclProfileRuleSrcL4Port destL4Port(23) - aclProfileRuleDestL4Port
| |||||||||||||||||||||
| CaclProfileRuleEtype | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.4 | INTEGER (0..65535) | RC | ||||||||||||||||||
column · INTEGER (0..65535) · read-create · current Matches specified Ether Type. | |||||||||||||||||||||
| CaclProfileRuleSrcMac | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.5 | PhysAddress | RC | ||||||||||||||||||
column · PhysAddress · read-create · current Matches specified source MAC. | |||||||||||||||||||||
| CaclProfileRuleDestMac | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.6 | PhysAddress | RC | ||||||||||||||||||
column · PhysAddress · read-create · current Matches specified destination MAC. | |||||||||||||||||||||
| CaclProfileRuleSrcOui | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.7 | OCTET STRING | RC | ||||||||||||||||||
column · OCTET STRING · read-create · current Matches specified source MAC OUI. | |||||||||||||||||||||
| CaclProfileRuleDestOui | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.8 | OCTET STRING | RC | ||||||||||||||||||
column · OCTET STRING · read-create · current Matches specified destination MAC OUI. | |||||||||||||||||||||
| CaclProfileRuleInnerVlan | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.9 | DisplayString | RC | ||||||||||||||||||
column · DisplayString · read-create · current Matches specified inner VLAN List. | |||||||||||||||||||||
| CaclProfileRuleOuterVlan | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.10 | DisplayString | RC | ||||||||||||||||||
column · DisplayString · read-create · current Matches specified outer VLAN List. | |||||||||||||||||||||
| CaclProfileRuleInnerPbit | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.11 | INTEGER (0..7) | RC | ||||||||||||||||||
column · INTEGER (0..7) · read-create · current Matches specified inner VLAN PBIT. | |||||||||||||||||||||
| CaclProfileRuleOuterPbit | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.12 | INTEGER (0..7) | RC | ||||||||||||||||||
column · INTEGER (0..7) · read-create · current Matches specified outer VLAN PBIT. | |||||||||||||||||||||
| CaclProfileRuleSrcIpRange | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.13 | IpAddress | RC | ||||||||||||||||||
column · IpAddress · read-create · current Matches specified source IP range. | |||||||||||||||||||||
| CaclProfileRuleSrcIpMask | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.14 | INTEGER (8..31) | RC | ||||||||||||||||||
column · INTEGER (8..31) · read-create · current The subnet mask of source IP range. | |||||||||||||||||||||
| CaclProfileRuleDestIpRange | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.15 | IpAddress | RC | ||||||||||||||||||
column · IpAddress · read-create · current Matches specified destination IP range. | |||||||||||||||||||||
| CaclProfileRuleDestIpMask | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.16 | INTEGER (8..31) | RC | ||||||||||||||||||
column · INTEGER (8..31) · read-create · current The subnet mask of destination IP range. | |||||||||||||||||||||
| CaclProfileRuleSrcIp | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.17 | IpAddress | RC | ||||||||||||||||||
column · IpAddress · read-create · current Matches specified source IP address. | |||||||||||||||||||||
| CaclProfileRuleDestIp | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.18 | IpAddress | RC | ||||||||||||||||||
column · IpAddress · read-create · current Matches specified destination IP address. | |||||||||||||||||||||
| CaclProfileRuleProtocol | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.19 | INTEGER (0..255) | RC | ||||||||||||||||||
column · INTEGER (0..255) · read-create · current Matches specified IP protocol. | |||||||||||||||||||||
| CaclProfileRuleIpPrecedence | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.20 | INTEGER (0..7) | RC | ||||||||||||||||||
column · INTEGER (0..7) · read-create · current Matches specified IP precedence. | |||||||||||||||||||||
| CaclProfileRuleDscp | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.21 | INTEGER (0..63) | RC | ||||||||||||||||||
column · INTEGER (0..63) · read-create · current Matches specified IP DSCP. | |||||||||||||||||||||
| CaclProfileRuleSrcIpv6 | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.22 | InetAddress | RC | ||||||||||||||||||
column · InetAddress · read-create · current Matches specified source IPv6 address. | |||||||||||||||||||||
| CaclProfileRuleDestIpv6 | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.23 | InetAddress | RC | ||||||||||||||||||
column · InetAddress · read-create · current Matches specified destination IPv6 address. | |||||||||||||||||||||
| CaclProfileRuleNextHeader | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.24 | INTEGER (1..255) | RC | ||||||||||||||||||
column · INTEGER (1..255) · read-create · current Matches specified IPv6 next header. | |||||||||||||||||||||
| CaclProfileRuleTrafficClass | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.25 | INTEGER (0..255) | RC | ||||||||||||||||||
column · INTEGER (0..255) · read-create · current Matches specified IPv6 traffic class. | |||||||||||||||||||||
| CaclProfileRuleSrcL4StartPort | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.26 | INTEGER (0..65535) | RC | ||||||||||||||||||
column · INTEGER (0..65535) · read-create · current Matches specified layer 4 source port range. | |||||||||||||||||||||
| CaclProfileRuleSrcL4EndPort | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.27 | INTEGER (0..65535) | RC | ||||||||||||||||||
column · INTEGER (0..65535) · read-create · current Matches specified layer 4 source port range. | |||||||||||||||||||||
| CaclProfileRuleDestL4StartPort | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.28 | INTEGER (0..65535) | RC | ||||||||||||||||||
column · INTEGER (0..65535) · read-create · current Matches specified layer 4 dest port range. | |||||||||||||||||||||
| CaclProfileRuleDestL4EndPort | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.29 | INTEGER (0..65535) | RC | ||||||||||||||||||
column · INTEGER (0..65535) · read-create · current Matches specified layer 4 dest port range. | |||||||||||||||||||||
| CaclProfileRuleSrcL4Port | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.30 | INTEGER (0..65535) | RC | ||||||||||||||||||
column · INTEGER (0..65535) · read-create · current Matches specified layer 4 source port. | |||||||||||||||||||||
| CaclProfileRuleDestL4Port | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.31 | INTEGER (0..65535) | RC | ||||||||||||||||||
column · INTEGER (0..65535) · read-create · current Matches specified layer 4 dest port. | |||||||||||||||||||||
| CaclProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.38 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| NaclMulticast | 1.3.6.1.4.1.890.1.5.13.13.1.7 | ||||||||||||||||||||
| SaclUnsolicited | 1.3.6.1.4.1.890.1.5.13.13.1.7.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Control filter to drop unknown multicast traffic Drop unknown multicast traffic(1) No drop unknown multicast traffic(2)
| |||||||||||||||||||||
| SaclUpstream | 1.3.6.1.4.1.890.1.5.13.13.1.7.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Control filter to drop unknown multicast traffic from upstream direction Drop multicast traffic from upstream direction (1) No drop multicast traffic from upstream direction (2)
| |||||||||||||||||||||
| SaclIpv6PassThrough | 1.3.6.1.4.1.890.1.5.13.13.1.7.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Set IPv6 packet transparent passthrough.
| |||||||||||||||||||||
| TaclBpduCtrlTable | 1.3.6.1.4.1.890.1.5.13.13.1.7.4 | NA | |||||||||||||||||||
table · not-accessible · current Configures BPDU control. | |||||||||||||||||||||
| RaclBpduCtrlEntry | 1.3.6.1.4.1.890.1.5.13.13.1.7.4.1 | NA | |||||||||||||||||||
| CbpduCtrlMode | 1.3.6.1.4.1.890.1.5.13.13.1.7.4.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configure BPDU control mode
| |||||||||||||||||||||
| SaclReserve | 1.3.6.1.4.1.890.1.5.13.13.1.7.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Reserved multicast packet control
| |||||||||||||||||||||
| NaclStormControl | 1.3.6.1.4.1.890.1.5.13.13.1.8 | ||||||||||||||||||||
| TaclStormControlTable | 1.3.6.1.4.1.890.1.5.13.13.1.8.4 | NA | |||||||||||||||||||
table · not-accessible · current Configures ACL storm control. | |||||||||||||||||||||
| RaclStormControlEntry | 1.3.6.1.4.1.890.1.5.13.13.1.8.4.1 | NA | |||||||||||||||||||
| CaclPortBroadcast | 1.3.6.1.4.1.890.1.5.13.13.1.8.4.1.1 | INTEGER (0..10000000) | RW | ||||||||||||||||||
column · INTEGER (0..10000000) · read-write · current Configure rate limit for broadcast storm
range depends on line card type
MSC: 0~10000000 kbps
GLC: 0~1000000 kbps
GPON: 0~262143 kbps
VLC: 2~100000 kbps
(Granularity is 64kbps, ex: 2~127kbps will be 64kbps, 128~191kbps will be 128kbps, etc.) | |||||||||||||||||||||
| CaclPortDlf | 1.3.6.1.4.1.890.1.5.13.13.1.8.4.1.2 | INTEGER (0..10000000) | RW | ||||||||||||||||||
column · INTEGER (0..10000000) · read-write · current Configure rate limit for DLF (unknown unicast) storm
range depends on line card type
MSC: 0~10000000 kbps
GLC: 0~1000000 kbps
GPON: 0~262143 kbps
VLC: 2~100000 kbps
(Granularity is 64kbps, ex: 2~127kbps will be 64kbps, 128~191kbps will be 128kbps, etc.) | |||||||||||||||||||||
| CaclPortMulticast | 1.3.6.1.4.1.890.1.5.13.13.1.8.4.1.3 | INTEGER (0..10000000) | RW | ||||||||||||||||||
column · INTEGER (0..10000000) · read-write · current Configure rate limit for unknown multicast storm
range depends on line card type
MSC: 0~10000000 kbps
GLC: 0~1000000 kbps
GPON: 0~262143 kbps
VLC: 2~100000 kbps
(Granularity is 64kbps, ex: 2~127kbps will be 64kbps, 128~191kbps will be 128kbps, etc.) | |||||||||||||||||||||
| TaclProfileActionTable | 1.3.6.1.4.1.890.1.5.13.13.1.9 | NA | |||||||||||||||||||
table · not-accessible · current Configures ACL profile action. | |||||||||||||||||||||
| RaclProfileActionEntry | 1.3.6.1.4.1.890.1.5.13.13.1.9.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry to configure actions regarding to classifier (acl profile).
| |||||||||||||||||||||
| CaclProfileActionMask | 1.3.6.1.4.1.890.1.5.13.13.1.9.1.1 | Bits | RC | ||||||||||||||||||
column · Bits · read-create · current Defines action(s) for the ACL profile. Every acktion mask bit has its own referenced action parameter(s). drop(0) - no action paramter rateLimit(1) - aclProfileActionRateCir, aclProfileActionRateCbs, aclProfileActionRateEir, aclProfileActionRateEbs, aclProfileActionRateMode and the value of cir, cbs, eir, ebs will be set to 64 by default and mode will be set to hierarchical(0) by default changeInnerPbit(2) - aclProfileActionInnerPbit changeOuterPbit(3) - aclProfileActionOuterPbit changeDscp(4) - aclProfileActionDscp changeTrafficClass(5) - aclProfileActionTrafficClass changeQos(6) - aclProfileActionQos permit(7) - no action paramter (only VLC/GLC support)
| |||||||||||||||||||||
| CaclProfileActionOuterPbit | 1.3.6.1.4.1.890.1.5.13.13.1.9.1.4 | INTEGER (0..7) | RC | ||||||||||||||||||
column · INTEGER (0..7) · read-create · current Change outer VLAN pbit of matched packets. | |||||||||||||||||||||
| CaclProfileActionDscp | 1.3.6.1.4.1.890.1.5.13.13.1.9.1.5 | INTEGER (0..63) | RC | ||||||||||||||||||
column · INTEGER (0..63) · read-create · current Change IP DSCP of matched packets. | |||||||||||||||||||||
| CaclProfileActionQos | 1.3.6.1.4.1.890.1.5.13.13.1.9.1.7 | INTEGER (0..7) | RC | ||||||||||||||||||
column · INTEGER (0..7) · read-create · current Change Qos of matched packets. | |||||||||||||||||||||
| CaclProfileActionRateCir | 1.3.6.1.4.1.890.1.5.13.13.1.9.1.8 | INTEGER (64..10000000) | RC | ||||||||||||||||||
column · INTEGER (64..10000000) · read-create · current CIR threshold of this ACL profile.
| |||||||||||||||||||||
| CaclProfileActionRateCbs | 1.3.6.1.4.1.890.1.5.13.13.1.9.1.9 | INTEGER (64..16000000) | RC | ||||||||||||||||||
column · INTEGER (64..16000000) · read-create · current CBS threshold of this ACL profile.
| |||||||||||||||||||||
| CaclProfileActionRateEir | 1.3.6.1.4.1.890.1.5.13.13.1.9.1.10 | INTEGER (64..10000000) | RC | ||||||||||||||||||
column · INTEGER (64..10000000) · read-create · current EIR threshold of this ACL profile.
| |||||||||||||||||||||
| CaclProfileActionRateEbs | 1.3.6.1.4.1.890.1.5.13.13.1.9.1.11 | INTEGER (64..16000000) | RC | ||||||||||||||||||
column · INTEGER (64..16000000) · read-create · current EBS threshold of this ACL profile.
| |||||||||||||||||||||
| SaclMaxNumOfAclEgressPerPort | 1.3.6.1.4.1.890.1.5.13.13.1.10 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The maximum number of ACL egress profiles per port. | |||||||||||||||||||||
| TaclEgressPortTable | 1.3.6.1.4.1.890.1.5.13.13.1.11 | NA | |||||||||||||||||||
table · not-accessible · current Configures references to specified ACL egress rule for the specified port. | |||||||||||||||||||||
| RaclEgressPortEntry | 1.3.6.1.4.1.890.1.5.13.13.1.11.1 | NA | |||||||||||||||||||
row · not-accessible · current A table entry to assign an interface port with ACL egress profile. | |||||||||||||||||||||
| CaclEgressPortProfileName | 1.3.6.1.4.1.890.1.5.13.13.1.11.1.1 | DisplayString (SIZE (1..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (1..31)) · read-only · current Configures references to specified ACL egress rule. | |||||||||||||||||||||
| CaclEgressPortRowStatus | 1.3.6.1.4.1.890.1.5.13.13.1.11.1.2 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| CaclEgressPortProfilePriority | 1.3.6.1.4.1.890.1.5.13.13.1.11.1.3 | INTEGER (1..8) | RO | ||||||||||||||||||
column · INTEGER (1..8) · read-only · current Configures priority of specified ACL rule in this port. ACL egress rules in a port can not assign to same priority. | |||||||||||||||||||||
| SaclMaxNumOfAclEgressProfiles | 1.3.6.1.4.1.890.1.5.13.13.1.12 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The maximum number of ACL egress profiles supported by the system. | |||||||||||||||||||||
| TaclEgressProfileTable | 1.3.6.1.4.1.890.1.5.13.13.1.13 | NA | |||||||||||||||||||
table · not-accessible · current Configures ACL egress profile. | |||||||||||||||||||||
| RaclEgressProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.1.13.1 | NA | |||||||||||||||||||
| CaclEgressProfileName | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.1 | DisplayString (SIZE (1..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (1..31)) · read-only · current Name of ACL egress profile. | |||||||||||||||||||||
| CaclEgressProfileFieldMask | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.3 | Bits | RC | ||||||||||||||||||
column · Bits · read-create · current Defines the compared fields mask for the ACL profile. Every field mask bit has its own referenced field parameter(s). etherType(0) - aclEgressProfileRuleEtype sourceMac(1) - aclEgressProfileRuleSrcMac destMac(2) - aclEgressProfileRuleDestMac sourceOui(3) - aclEgressProfileRuleSrcOui destOui(4) - aclEgressProfileRuleDestOui uniVlan(6) - aclEgressProfileRuleUniVlan uniPbit(8) - aclEgressProfileRuleUniPbit sourceIpRange(9) - aclEgressProfileRuleSrcIpRange, aclEgressProfileRuleSrcIpMask destIpRange(10) - aclEgressProfileRuleDestIpRange, aclEgressProfileRuleDestIpMask sourceIp(11) - aclEgressProfileRuleSrcIp destIp(12) - aclEgressProfileRuleDestIp protocol(13) - aclEgressProfileRuleProtocol ipPrecedence(14) - aclEgressProfileRuleIpPrecedence dscp(15) - aclEgressProfileRuleDscp nextHeader(18) - aclEgressProfileRuleNextHeader trafficClass(19) - aclEgressProfileRuleTrafficClass sourceL4PortRange(20) - aclEgressProfileRuleSrcL4StartPort, aclEgressProfileRuleSrcL4EndPort destL4PortRange(21) - aclEgressProfileRuleDestL4StartPort, aclEgressProfileRuleDestL4EndPort sourceL4Port(22) - aclEgressProfileRuleSrcL4Port destL4Port(23) - aclEgressProfileRuleDestL4Port
| |||||||||||||||||||||
| CaclEgressProfileRuleEtype | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.4 | INTEGER (0..65535) | RC | ||||||||||||||||||
column · INTEGER (0..65535) · read-create · current Matches specified Ether Type. | |||||||||||||||||||||
| CaclEgressProfileRuleSrcMac | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.5 | PhysAddress | RC | ||||||||||||||||||
column · PhysAddress · read-create · current Matches specified source MAC. | |||||||||||||||||||||
| CaclEgressProfileRuleDestMac | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.6 | PhysAddress | RC | ||||||||||||||||||
column · PhysAddress · read-create · current Matches specified destination MAC. | |||||||||||||||||||||
| CaclEgressProfileRuleSrcOui | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.7 | OCTET STRING | RC | ||||||||||||||||||
column · OCTET STRING · read-create · current Matches specified source MAC OUI. | |||||||||||||||||||||
| CaclEgressProfileRuleDestOui | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.8 | OCTET STRING | RC | ||||||||||||||||||
column · OCTET STRING · read-create · current Matches specified destination MAC OUI. | |||||||||||||||||||||
| CaclEgressProfileRuleUniVlan | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.10 | DisplayString | RC | ||||||||||||||||||
column · DisplayString · read-create · current Matches specified outer VLAN list. | |||||||||||||||||||||
| CaclEgressProfileRuleUniPbit | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.12 | INTEGER (0..7) | RC | ||||||||||||||||||
column · INTEGER (0..7) · read-create · current Matches specified outer VLAN PBIT. | |||||||||||||||||||||
| CaclEgressProfileRuleSrcIpRange | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.13 | IpAddress | RC | ||||||||||||||||||
column · IpAddress · read-create · current Matches specified source IP range. | |||||||||||||||||||||
| CaclEgressProfileRuleSrcIpMask | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.14 | INTEGER (16..31) | RC | ||||||||||||||||||
column · INTEGER (16..31) · read-create · current The subnet mask of source IP range. | |||||||||||||||||||||
| CaclEgressProfileRuleDestIpRange | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.15 | IpAddress | RC | ||||||||||||||||||
column · IpAddress · read-create · current Matches specified destination IP range. | |||||||||||||||||||||
| CaclEgressProfileRuleDestIpMask | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.16 | INTEGER (16..31) | RC | ||||||||||||||||||
column · INTEGER (16..31) · read-create · current The subnet mask of destination IP range. | |||||||||||||||||||||
| CaclEgressProfileRuleSrcIp | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.17 | IpAddress | RC | ||||||||||||||||||
column · IpAddress · read-create · current Matches specified source IP address. | |||||||||||||||||||||
| CaclEgressProfileRuleDestIp | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.18 | IpAddress | RC | ||||||||||||||||||
column · IpAddress · read-create · current Matches specified destination IP address. | |||||||||||||||||||||
| CaclEgressProfileRuleProtocol | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.19 | INTEGER (0..255) | RC | ||||||||||||||||||
column · INTEGER (0..255) · read-create · current Matches specified IP protocol. | |||||||||||||||||||||
| CaclEgressProfileRuleIpPrecedence | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.20 | INTEGER (0..7) | RC | ||||||||||||||||||
column · INTEGER (0..7) · read-create · current Matches specified IP precedence. | |||||||||||||||||||||
| CaclEgressProfileRuleDscp | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.21 | INTEGER (0..63) | RC | ||||||||||||||||||
column · INTEGER (0..63) · read-create · current Matches specified IP DSCP. | |||||||||||||||||||||
| CaclEgressProfileRuleNextHeader | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.24 | INTEGER (1..255) | RC | ||||||||||||||||||
column · INTEGER (1..255) · read-create · current Matches specified IPv6 next header. | |||||||||||||||||||||
| CaclEgressProfileRuleTrafficClass | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.25 | INTEGER (0..255) | RC | ||||||||||||||||||
column · INTEGER (0..255) · read-create · current Matches specified IPv6 traffic class. | |||||||||||||||||||||
| CaclEgressProfileRuleSrcL4StartPort | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.26 | INTEGER (0..65535) | RC | ||||||||||||||||||
column · INTEGER (0..65535) · read-create · current Matches specified layer 4 source port range. | |||||||||||||||||||||
| CaclEgressProfileRuleSrcL4EndPort | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.27 | INTEGER (0..65535) | RC | ||||||||||||||||||
column · INTEGER (0..65535) · read-create · current Matches specified layer 4 source port range. | |||||||||||||||||||||
| CaclEgressProfileRuleDestL4StartPort | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.28 | INTEGER (0..65535) | RC | ||||||||||||||||||
column · INTEGER (0..65535) · read-create · current Matches specified layer 4 dest port range. | |||||||||||||||||||||
| CaclEgressProfileRuleDestL4EndPort | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.29 | INTEGER (0..65535) | RC | ||||||||||||||||||
column · INTEGER (0..65535) · read-create · current Matches specified layer 4 dest port range. | |||||||||||||||||||||
| CaclEgressProfileRuleSrcL4Port | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.30 | INTEGER (0..65535) | RC | ||||||||||||||||||
column · INTEGER (0..65535) · read-create · current Matches specified layer 4 source port. | |||||||||||||||||||||
| CaclEgressProfileRuleDestL4Port | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.31 | INTEGER (0..65535) | RC | ||||||||||||||||||
column · INTEGER (0..65535) · read-create · current Matches specified layer 4 dest port. | |||||||||||||||||||||
| CaclEgressProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.38 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| TaclEgressProfileActionTable | 1.3.6.1.4.1.890.1.5.13.13.1.14 | NA | |||||||||||||||||||
table · not-accessible · current Configures ACL egress profile action. | |||||||||||||||||||||
| RaclEgressProfileActionEntry | 1.3.6.1.4.1.890.1.5.13.13.1.14.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry to configure actions regarding to classifier (acl egress profile).
| |||||||||||||||||||||
| CaclEgressProfileActionMask | 1.3.6.1.4.1.890.1.5.13.13.1.14.1.1 | Bits | RC | ||||||||||||||||||
column · Bits · read-create · current Defines action(s) for the ACL egress profile. Every acktion mask bit has its own referenced action parameter(s). drop(0) - no action paramter changeOuterPbit(3) - aclEgressProfileActionOuterPbit changeDscp(4) - aclEgressProfileActionDscp permit(7) - no action paramter (only VLC/GLC support)
| |||||||||||||||||||||
| CaclEgressProfileActionUniPbit | 1.3.6.1.4.1.890.1.5.13.13.1.14.1.4 | INTEGER (0..7) | RC | ||||||||||||||||||
column · INTEGER (0..7) · read-create · current Change outer VLAN pbit of matched packets. | |||||||||||||||||||||
| CaclEgressProfileActionDscp | 1.3.6.1.4.1.890.1.5.13.13.1.14.1.5 | INTEGER (0..63) | RC | ||||||||||||||||||
column · INTEGER (0..63) · read-create · current Change IP DSCP of matched packets. | |||||||||||||||||||||
| NarpInspection | 1.3.6.1.4.1.890.1.5.13.13.1.17 | ||||||||||||||||||||
| TarpInspectionTable | 1.3.6.1.4.1.890.1.5.13.13.1.17.1 | NA | |||||||||||||||||||
table · not-accessible · current Support ARP inspection to filter unauthorized ARP packets on the network. This can prevent many kinds of man-in-the-middle attacks. This table is supported by R5.05 and later versions. | |||||||||||||||||||||
| RarpInspectionEntry | 1.3.6.1.4.1.890.1.5.13.13.1.17.1.1 | NA | |||||||||||||||||||
| CarpInspectionEnable | 1.3.6.1.4.1.890.1.5.13.13.1.17.1.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable/disable arp inspection on the specified subscriber port.
| |||||||||||||||||||||
| TarpInspectFilterSetupTable | 1.3.6.1.4.1.890.1.5.13.13.1.17.2 | NA | |||||||||||||||||||
| RarpInspectFilterSetupEntry | 1.3.6.1.4.1.890.1.5.13.13.1.17.2.1 | NA | |||||||||||||||||||
| CarpInspectFilterSetupMac | 1.3.6.1.4.1.890.1.5.13.13.1.17.2.1.1 | MacAddress | RW | ||||||||||||||||||
column · MacAddress · read-write · current The MAC address. | |||||||||||||||||||||
| CarpInspectFilterSetupVid | 1.3.6.1.4.1.890.1.5.13.13.1.17.2.1.2 | VlanIndex (0..4094) | RW | ||||||||||||||||||
column · VlanIndex (0..4094) · read-write · current The VLAN ID. | |||||||||||||||||||||
| CarpInspectFilterSetupClear | 1.3.6.1.4.1.890.1.5.13.13.1.17.2.1.3 | EnabledStatus | RW | ||||||||||||||||||
column · EnabledStatus · read-write · current Clear arp inspection Filter database. | |||||||||||||||||||||
| TarpInspectFilterTable | 1.3.6.1.4.1.890.1.5.13.13.1.17.3 | NA | |||||||||||||||||||
| RarpInspectFilterEntry | 1.3.6.1.4.1.890.1.5.13.13.1.17.3.1 | NA | |||||||||||||||||||
| CarpInspectFilterId | 1.3.6.1.4.1.890.1.5.13.13.1.17.3.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The index. | |||||||||||||||||||||
| CarpInspectFilterMac | 1.3.6.1.4.1.890.1.5.13.13.1.17.3.1.2 | MacAddress | RO | ||||||||||||||||||
column · MacAddress · read-only · current The MAC address. | |||||||||||||||||||||
| CarpInspectFilterVid | 1.3.6.1.4.1.890.1.5.13.13.1.17.3.1.3 | VlanIndex (1..4094) | RO | ||||||||||||||||||
column · VlanIndex (1..4094) · read-only · current The VLAN ID. | |||||||||||||||||||||
| CarpInspectFilterExpiry | 1.3.6.1.4.1.890.1.5.13.13.1.17.3.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The expiry time represents how long (in seconds) the MAC address filter remains in the Switch. | |||||||||||||||||||||
| CarpInspectFilterReason | 1.3.6.1.4.1.890.1.5.13.13.1.17.3.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The reason why the ARP packet was discarded.
| |||||||||||||||||||||
| NmacFF | 1.3.6.1.4.1.890.1.5.13.13.1.18 | ||||||||||||||||||||
| TmacFFProfileTable | 1.3.6.1.4.1.890.1.5.13.13.1.18.1 | NA | |||||||||||||||||||
table · not-accessible · current MAC force forwarding profile configuration table. | |||||||||||||||||||||
| RmacFFProfile | 1.3.6.1.4.1.890.1.5.13.13.1.18.1.1 | NA | |||||||||||||||||||
row · not-accessible · current MAC force forwarding profile configuration table.
| |||||||||||||||||||||
| CmacFFProfileName | 1.3.6.1.4.1.890.1.5.13.13.1.18.1.1.1 | DisplayString (SIZE (1..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (1..31)) · read-only · current Profile name | |||||||||||||||||||||
| CmacFFProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.1.18.1.1.2 | RowStatus | RC | ||||||||||||||||||
| TmacFFEntryTable | 1.3.6.1.4.1.890.1.5.13.13.1.18.2 | NA | |||||||||||||||||||
table · not-accessible · current MAC force forwarding entry configuration table. | |||||||||||||||||||||
| RmacFFEntry | 1.3.6.1.4.1.890.1.5.13.13.1.18.2.1 | NA | |||||||||||||||||||
row · not-accessible · current MAC force forwarding entry configuration table. | |||||||||||||||||||||
| CmacFFEntryProfileName | 1.3.6.1.4.1.890.1.5.13.13.1.18.2.1.1 | DisplayString (SIZE (1..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (1..31)) · read-only · current Profile name | |||||||||||||||||||||
| CmacFFEntryIndex | 1.3.6.1.4.1.890.1.5.13.13.1.18.2.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The MAC force fowarding static entry index 1 ~ 24 | |||||||||||||||||||||
| CmacFFEntrySrcIP | 1.3.6.1.4.1.890.1.5.13.13.1.18.2.1.3 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current Matched range for static subscriber's IP in ARP request | |||||||||||||||||||||
| CmacFFEntryMask | 1.3.6.1.4.1.890.1.5.13.13.1.18.2.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Matched range for static subscriber's IP in ARP request | |||||||||||||||||||||
| CmacFFEntryArasIP | 1.3.6.1.4.1.890.1.5.13.13.1.18.2.1.5 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current IP of static MAC force fowarding Access Router/App Server | |||||||||||||||||||||
| CmacFFEntryVid | 1.3.6.1.4.1.890.1.5.13.13.1.18.2.1.6 | INTEGER (1..4094) | RW | ||||||||||||||||||
column · INTEGER (1..4094) · read-write · current vlan ID of MAC force fowarding Access Router/App Server | |||||||||||||||||||||
| CmacFFEntryRowStatus | 1.3.6.1.4.1.890.1.5.13.13.1.18.2.1.7 | RowStatus | RC | ||||||||||||||||||
| TmacFFApplyProflieTable | 1.3.6.1.4.1.890.1.5.13.13.1.18.3 | NA | |||||||||||||||||||
table · not-accessible · current Configures references to specified macFF profile for the specified slot. | |||||||||||||||||||||
| RmacFFApplyProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.1.18.3.1 | NA | |||||||||||||||||||
| CmacFFApplyProfileName | 1.3.6.1.4.1.890.1.5.13.13.1.18.3.1.1 | DisplayString (SIZE (1..31)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (1..31)) · read-write · current Apply a profile name. Set '' for no apply proflie. | |||||||||||||||||||||
| TmacFFArpStatusUplinkTable | 1.3.6.1.4.1.890.1.5.13.13.1.18.4 | NA | |||||||||||||||||||
| RmacFFArpStatusUplinkEntry | 1.3.6.1.4.1.890.1.5.13.13.1.18.4.1 | NA | |||||||||||||||||||
row · not-accessible · current The entry of macFFArpStatusUplinkTable. | |||||||||||||||||||||
| CmacFFArpStatusUplinkIpAddr | 1.3.6.1.4.1.890.1.5.13.13.1.18.4.1.1 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current macFF arp ip address from uplink | |||||||||||||||||||||
| CmacFFArpStatusUplinkMacAddr | 1.3.6.1.4.1.890.1.5.13.13.1.18.4.1.2 | PhysAddress | RO | ||||||||||||||||||
column · PhysAddress · read-only · current macFF arp mac address from uplink | |||||||||||||||||||||
| CmacFFArpStatusUplinkMacVid | 1.3.6.1.4.1.890.1.5.13.13.1.18.4.1.3 | INTEGER (1..4094) | RO | ||||||||||||||||||
column · INTEGER (1..4094) · read-only · current macFF arp vid from uplink | |||||||||||||||||||||
| TmacFFArpStatusSlotTable | 1.3.6.1.4.1.890.1.5.13.13.1.18.5 | NA | |||||||||||||||||||
| RmacFFArpStatusSlotEntry | 1.3.6.1.4.1.890.1.5.13.13.1.18.5.1 | NA | |||||||||||||||||||
row · not-accessible · current The entry of macFFArpStatusSlotTable. | |||||||||||||||||||||
| CmacFFArpStatusSlotIpAddr | 1.3.6.1.4.1.890.1.5.13.13.1.18.5.1.1 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current macFF arp ip address from subscrib port | |||||||||||||||||||||
| CmacFFArpStatusSlotMacAddr | 1.3.6.1.4.1.890.1.5.13.13.1.18.5.1.2 | PhysAddress | RO | ||||||||||||||||||
column · PhysAddress · read-only · current macFF arp mac address from subscrib port | |||||||||||||||||||||
| CmacFFArpStatusSlotMacVid | 1.3.6.1.4.1.890.1.5.13.13.1.18.5.1.3 | INTEGER (1..4094) | RO | ||||||||||||||||||
column · INTEGER (1..4094) · read-only · current macFF arp vid from subscrib port | |||||||||||||||||||||
| CmacFFArpStatusSlotPort | 1.3.6.1.4.1.890.1.5.13.13.1.18.5.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current macFF arp learnt subscrib port | |||||||||||||||||||||
| TmacFFArpCntUplinkTable | 1.3.6.1.4.1.890.1.5.13.13.1.18.6 | NA | |||||||||||||||||||
| RmacFFArpCntUplinkEntry | 1.3.6.1.4.1.890.1.5.13.13.1.18.6.1 | NA | |||||||||||||||||||
| CmacFFArpCntUplinkReqRx | 1.3.6.1.4.1.890.1.5.13.13.1.18.6.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current macFF arp request rx counter from uplink | |||||||||||||||||||||
| CmacFFArpCntUplinkReqTx | 1.3.6.1.4.1.890.1.5.13.13.1.18.6.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current macFF arp request tx counter from uplink | |||||||||||||||||||||
| CmacFFArpCntUplinkReqRxDrop | 1.3.6.1.4.1.890.1.5.13.13.1.18.6.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current macFF arp request rx drop counter from uplink | |||||||||||||||||||||
| CmacFFArpCntUplinkRpyRx | 1.3.6.1.4.1.890.1.5.13.13.1.18.6.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current macFF arp reply rx counter from uplink | |||||||||||||||||||||
| CmacFFArpCntUplinkRpyTx | 1.3.6.1.4.1.890.1.5.13.13.1.18.6.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current macFF arp reply tx counter from uplink | |||||||||||||||||||||
| CmacFFArpCntUplinkRpyRxDrop | 1.3.6.1.4.1.890.1.5.13.13.1.18.6.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current macFF arp reply rx drop counter from uplink | |||||||||||||||||||||
| TmacFFArpCntPortTable | 1.3.6.1.4.1.890.1.5.13.13.1.18.7 | NA | |||||||||||||||||||
| RmacFFArpCntPortEntry | 1.3.6.1.4.1.890.1.5.13.13.1.18.7.1 | NA | |||||||||||||||||||
| CmacFFArpCntPortReqRx | 1.3.6.1.4.1.890.1.5.13.13.1.18.7.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current macFF arp request rx counter from subscrib port | |||||||||||||||||||||
| CmacFFArpCntPortReqTx | 1.3.6.1.4.1.890.1.5.13.13.1.18.7.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current macFF arp request tx counter from subscrib port | |||||||||||||||||||||
| CmacFFArpCntPortReqRxDrop | 1.3.6.1.4.1.890.1.5.13.13.1.18.7.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current macFF arp request rx drop counter from subscrib port | |||||||||||||||||||||
| CmacFFArpCntPortRpyRx | 1.3.6.1.4.1.890.1.5.13.13.1.18.7.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current macFF arp reply rx counter from subscrib port | |||||||||||||||||||||
| CmacFFArpCntPortRpyTx | 1.3.6.1.4.1.890.1.5.13.13.1.18.7.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current macFF arp reply tx counter from subscrib port | |||||||||||||||||||||
| CmacFFArpCntPortRpyRxDrop | 1.3.6.1.4.1.890.1.5.13.13.1.18.7.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current macFF reply rx drop counter from subscrib port | |||||||||||||||||||||
| NmacFFOps | 1.3.6.1.4.1.890.1.5.13.13.1.18.8 | ||||||||||||||||||||
| SmacFFTarget | 1.3.6.1.4.1.890.1.5.13.13.1.18.8.1 | PortList | RW | ||||||||||||||||||
scalar · PortList · read-write · current Configure the target interface (ifindex) to clear packet statistics. 10000: represent slot 1 system 20000: represent slot 2 system 40000: represent slot 4 system 50000: represent slot 5 system 60000: represent slot 6 system | |||||||||||||||||||||
| SmacFFOperation | 1.3.6.1.4.1.890.1.5.13.13.1.18.8.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Clear macff statistics on the target ifindex specified by 'macFFTarget'.
| |||||||||||||||||||||
| Ndot1x | 1.3.6.1.4.1.890.1.5.13.13.1.20 | ||||||||||||||||||||
| Sdot1xAuthMethod | 1.3.6.1.4.1.890.1.5.13.13.1.20.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Configure the method for dot1x authentication. userprofile: use local configured user to authenticate user radius: use remote radius server to authenticate user.
| |||||||||||||||||||||
| Tdot1xRadiusServerTable | 1.3.6.1.4.1.890.1.5.13.13.1.20.3 | NA | |||||||||||||||||||
table · not-accessible · current A table that contains Radius Server information for 802.1x. | |||||||||||||||||||||
| Rdot1xRadiusServerEntry | 1.3.6.1.4.1.890.1.5.13.13.1.20.3.1 | NA | |||||||||||||||||||
| Cdot1xRadiusServerIndex | 1.3.6.1.4.1.890.1.5.13.13.1.20.3.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The identity of the RADIUS server. | |||||||||||||||||||||
| Cdot1xRadiusServerIp | 1.3.6.1.4.1.890.1.5.13.13.1.20.3.1.2 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The IP address of the Radius Server. Default IP 127.0.0.254 is invalid but allowed to set. | |||||||||||||||||||||
| Cdot1xRadiusServerPort | 1.3.6.1.4.1.890.1.5.13.13.1.20.3.1.3 | INTEGER (1..65535) | RW | ||||||||||||||||||
column · INTEGER (1..65535) · read-write · current The UDP port of the Radius Server. | |||||||||||||||||||||
| Cdot1xRadiusServerSecret | 1.3.6.1.4.1.890.1.5.13.13.1.20.3.1.4 | DisplayString (SIZE (1..63)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (1..63)) · read-write · current The shared secret of the Radius Server. Server can't work with zero length. | |||||||||||||||||||||
| Tdot1xPortTable | 1.3.6.1.4.1.890.1.5.13.13.1.20.4 | NA | |||||||||||||||||||
table · not-accessible · current This table includes 802.1x port configuration. | |||||||||||||||||||||
| Rdot1xPortEntry | 1.3.6.1.4.1.890.1.5.13.13.1.20.4.1 | NA | |||||||||||||||||||
| Cdot1xPortActive | 1.3.6.1.4.1.890.1.5.13.13.1.20.4.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable/disable 802.1x for the port.
| |||||||||||||||||||||
| Cdot1xPortControl | 1.3.6.1.4.1.890.1.5.13.13.1.20.4.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configure the authentication status of the port. auto: if the port is un-authenticated, system will trigger 802.1x procedure to authenticate user. If the port is already authenticated, it will do nothing. auth: force the port directly to authenticated. unauth: force the port to un-authenticated. default is auto
| |||||||||||||||||||||
| Cdot1xPortRadiusServerIndex | 1.3.6.1.4.1.890.1.5.13.13.1.20.4.1.3 | INTEGER (1..16) | RW | ||||||||||||||||||
column · INTEGER (1..16) · read-write · current The index of the RADIUS server in dot1xRadiusServerTable | |||||||||||||||||||||
| Cdot1xPortAuthOnce | 1.3.6.1.4.1.890.1.5.13.13.1.20.4.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current If the port is authenticated, dot1x will not re-authenticate periodically.
| |||||||||||||||||||||
| Cdot1xPortPeriod | 1.3.6.1.4.1.890.1.5.13.13.1.20.4.1.5 | INTEGER (60..65535) | RW | ||||||||||||||||||
column · INTEGER (60..65535) · read-write · current configure the interval if the port need re-authenticate periodically. <period>: 60 ~ 65535 in seconds, default is 3600 seconds. | |||||||||||||||||||||
| Cdot1xPortCircuitIDInfo | 1.3.6.1.4.1.890.1.5.13.13.1.20.4.1.6 | DisplayString (SIZE (0..127)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..127)) · read-write · current Configures Dot1X circuit ID format
Info is composed by the following components
special characters except % => ~`!@#$^&*()-=_+{}<>,./
%%: equals character %
%0x00~%0xFF: represents byte value
%pname: configured port name
%ptel: configured port telephone No.
%pid: port index
%chvpi: channel vpi
%chvci: channel vci
%slotid: slot index of the logic port
%svlan: SVLAN ID which Dot1X client runs on
%cvlan: CVLAN ID which Dot1X client runs on
%hname: host device name
%cmac1: MAC address of client, represents as XX:XX:XX:XX:XX:XX X=0~F
%cmac2: MAC address of client, represents as XXXXXXXXXXXX X=0~F
%cmac3: : MAC address of client, represents as Byte
%dmac1: MAC address of host device, represents as XX:XX:XX:XX:XX:XX X=0~F
%dmac2: MAC address of host device, represents as XXXXXXXXXXXX X=0~F
%dmac3: MAC address of host device, represents as Byte
%phtype: ATM: atm Ethernet: eth
%hmodel: model name of host device
%fwid: host device firmware ID
%blank: blank character | |||||||||||||||||||||
| Sdot1xMaxNumOfUserProfiles | 1.3.6.1.4.1.890.1.5.13.13.1.20.5 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The maximum number of dot1x user profiles supported by the system. | |||||||||||||||||||||
| Tdot1xUserProfileTable | 1.3.6.1.4.1.890.1.5.13.13.1.20.6 | NA | |||||||||||||||||||
table · not-accessible · current This table includes user profile setting for 802.1x configuration. | |||||||||||||||||||||
| Rdot1xUserProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.1.20.6.1 | NA | |||||||||||||||||||
| Cdot1xUserProfileName | 1.3.6.1.4.1.890.1.5.13.13.1.20.6.1.1 | DisplayString (SIZE (1..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (1..31)) · read-only · current Name of Dot1X user profile | |||||||||||||||||||||
| Cdot1xUserProfilePassword | 1.3.6.1.4.1.890.1.5.13.13.1.20.6.1.2 | DisplayString (SIZE (1..31)) | RC | ||||||||||||||||||
column · DisplayString (SIZE (1..31)) · read-create · current Configure the password | |||||||||||||||||||||
| Cdot1xUserProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.1.20.6.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| Tdot1xStatsPortTable | 1.3.6.1.4.1.890.1.5.13.13.1.20.7 | NA | |||||||||||||||||||
table · not-accessible · current This table includes port statistics of 802.1x . | |||||||||||||||||||||
| Rdot1xStatsPortEntry | 1.3.6.1.4.1.890.1.5.13.13.1.20.7.1 | NA | |||||||||||||||||||
| Cdot1xStatsPortReAuthCount | 1.3.6.1.4.1.890.1.5.13.13.1.20.7.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Display how many times each port re-authroize | |||||||||||||||||||||
| Cdot1xStatsPortAuthorized | 1.3.6.1.4.1.890.1.5.13.13.1.20.7.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Display Authorized status | |||||||||||||||||||||
| Nddos | 1.3.6.1.4.1.890.1.5.13.13.1.21 | ||||||||||||||||||||
| SddosMode | 1.3.6.1.4.1.890.1.5.13.13.1.21.1 | Bits | RW | ||||||||||||||||||
scalar · Bits · read-write · current Configure the DDoS mode of GENNI ports.
| |||||||||||||||||||||
| TportFilterTable | 1.3.6.1.4.1.890.1.5.13.13.1.22 | NA | |||||||||||||||||||
table · not-accessible · current This table includes packet filter port configuration. | |||||||||||||||||||||
| RportFilterEntry | 1.3.6.1.4.1.890.1.5.13.13.1.22.1 | NA | |||||||||||||||||||
| CfilterType | 1.3.6.1.4.1.890.1.5.13.13.1.22.1.1 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current accept-all Accept all packet type pppoe-only Only receive PPPoE packet custom Custom reject packet type pppoe reject PPPoE packet ip reject IP packet arp reject ARP packet dhcp reject DHCP packet eapol reject EAPOL packet igmp reject IGMP packet netbios reject NETBIOS packet
| |||||||||||||||||||||
| Nmacfilter | 1.3.6.1.4.1.890.1.5.13.13.1.23 | ||||||||||||||||||||
| SmaxNumOfMacFiltersPerSlot | 1.3.6.1.4.1.890.1.5.13.13.1.23.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The max number of mac(oui) filters supported per slot.
| |||||||||||||||||||||
| SmaxNumOfMacFiltersPerPort | 1.3.6.1.4.1.890.1.5.13.13.1.23.2 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The max number of mac(oui) filters supported per port.
| |||||||||||||||||||||
| ScurrNumOfMacFiltersPerSlot | 1.3.6.1.4.1.890.1.5.13.13.1.23.3 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The current number of mac(oui) filters per slot.
| |||||||||||||||||||||
| TmacFilterPortTable | 1.3.6.1.4.1.890.1.5.13.13.1.23.4 | NA | |||||||||||||||||||
table · not-accessible · current This table includes the status of mac filtering for each port. | |||||||||||||||||||||
| RmacFilterPortEntry | 1.3.6.1.4.1.890.1.5.13.13.1.23.4.1 | NA | |||||||||||||||||||
| CmacFilterPortEnable | 1.3.6.1.4.1.890.1.5.13.13.1.23.4.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable/disable MAC filtering for the port.
| |||||||||||||||||||||
| CmacFilterPortFilterMode | 1.3.6.1.4.1.890.1.5.13.13.1.23.4.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The mac filter mode (accept or deny) for the port.
| |||||||||||||||||||||
| TmacFilterTable | 1.3.6.1.4.1.890.1.5.13.13.1.23.5 | NA | |||||||||||||||||||
table · not-accessible · current A table that contains the mac filter addresses. | |||||||||||||||||||||
| RmacFilterEntry | 1.3.6.1.4.1.890.1.5.13.13.1.23.5.1 | NA | |||||||||||||||||||
| CmacFilterAddr | 1.3.6.1.4.1.890.1.5.13.13.1.23.5.1.1 | PhysAddress | RO | ||||||||||||||||||
column · PhysAddress · read-only · current The mac address which can pass through or be rejected from the port. | |||||||||||||||||||||
| CmacFilterRowStatus | 1.3.6.1.4.1.890.1.5.13.13.1.23.5.1.2 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status of the entry. | |||||||||||||||||||||
| TouiFilterTable | 1.3.6.1.4.1.890.1.5.13.13.1.23.6 | NA | |||||||||||||||||||
table · not-accessible · current A table that contains the OUI filter addresses. | |||||||||||||||||||||
| RouiFilterEntry | 1.3.6.1.4.1.890.1.5.13.13.1.23.6.1 | NA | |||||||||||||||||||
| CouiFilterAddr | 1.3.6.1.4.1.890.1.5.13.13.1.23.6.1.1 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current The first three bytes of the mac address which can pass through or be rejected from the port. | |||||||||||||||||||||
| CouiFilterRowStatus | 1.3.6.1.4.1.890.1.5.13.13.1.23.6.1.2 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status of the entry. | |||||||||||||||||||||
| SaclProfileMode | 1.3.6.1.4.1.890.1.5.13.13.1.24 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Set acl profile mode, profile mode only support to GLC card. Port: per-port mode, every port only can set 8 acl-profile with priority. Profile: per-profile mode, every port can set 24 acl-profile with system priority.
| |||||||||||||||||||||
| Nalarm | 1.3.6.1.4.1.890.1.5.13.13.2 | ||||||||||||||||||||
| NalarmOps | 1.3.6.1.4.1.890.1.5.13.13.2.1 | ||||||||||||||||||||
| ScurAlarmClearTargetTrapOid | 1.3.6.1.4.1.890.1.5.13.13.2.1.1 | OBJECT IDENTIFIER | RW | ||||||||||||||||||
scalar · OBJECT IDENTIFIER · read-write · current Set target alarm Trap OID for clearing one current alarm. | |||||||||||||||||||||
| ScurAlarmClearTargetIndex1 | 1.3.6.1.4.1.890.1.5.13.13.2.1.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Set target alarm index1 for clearing one current alarm. | |||||||||||||||||||||
| ScurAlarmClearTargetIndex2 | 1.3.6.1.4.1.890.1.5.13.13.2.1.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Set target alarm index2 for clearing one current alarm. | |||||||||||||||||||||
| ScurAlarmClearTargetIndex3 | 1.3.6.1.4.1.890.1.5.13.13.2.1.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Set target alarm index3 for clearing one current alarm. | |||||||||||||||||||||
| SalarmOperation | 1.3.6.1.4.1.890.1.5.13.13.2.1.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Its value will be set to zero after operation finished.
| |||||||||||||||||||||
| TcurrAlarmTable | 1.3.6.1.4.1.890.1.5.13.13.2.2 | NA | |||||||||||||||||||
table · not-accessible · current Displays current alarm. | |||||||||||||||||||||
| RcurrAlarmEntry | 1.3.6.1.4.1.890.1.5.13.13.2.2.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CcurrAlarmIndex | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Index of the alarm. | |||||||||||||||||||||
| CcurrAlarmCondId | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.2 | INTEGER | RO | ||||||||||||||||||
| CcurrAlarmOccurTime | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.3 | TimeTicks | RO | ||||||||||||||||||
column · TimeTicks · read-only · current Alarm occurence time (in hundredths of a second) since the system was last re-initialized. | |||||||||||||||||||||
| CcurrAlarmTrapOid | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.4 | OBJECT IDENTIFIER | RO | ||||||||||||||||||
column · OBJECT IDENTIFIER · read-only · current Trap OID of the alarm. | |||||||||||||||||||||
| CcurrAlarmParam1 | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The 1st parameter of the alarm. | |||||||||||||||||||||
| CcurrAlarmParam2 | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The 2nd parameter of the alarm. | |||||||||||||||||||||
| CcurrAlarmParam3 | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The 3rd parameter of the alarm. | |||||||||||||||||||||
| CcurrAlarmParam4 | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The 4th parameter of the alarm. | |||||||||||||||||||||
| CcurrAlarmParam5 | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The 5th parameter of the alarm. | |||||||||||||||||||||
| CcurrAlarmParam6 | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The 6th parameter of the alarm. | |||||||||||||||||||||
| CcurrAlarmParam7 | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The 7th parameter of the alarm. | |||||||||||||||||||||
| CcurrAlarmParam8 | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.12 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The 8th parameter of the alarm. | |||||||||||||||||||||
| CcurrAlarmParam9 | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.13 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The 9th parameter of the alarm. | |||||||||||||||||||||
| CcurrAlarmTimeDescr | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.14 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The string representation of occurence time (YYYY/MM/DD HH:MM:SS). | |||||||||||||||||||||
| CcurrAlarmSeverity | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.15 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The severity of the alarm.
| |||||||||||||||||||||
| CcurrAlarmDescr | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.16 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The description of the alarm. | |||||||||||||||||||||
| ThistAlarmTable | 1.3.6.1.4.1.890.1.5.13.13.2.3 | NA | |||||||||||||||||||
table · not-accessible · current Displays alarm history. | |||||||||||||||||||||
| RhistAlarmEntry | 1.3.6.1.4.1.890.1.5.13.13.2.3.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| ChistAlarmIndex | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Index of the alarm. | |||||||||||||||||||||
| ChistAlarmCondId | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.2 | INTEGER | RO | ||||||||||||||||||
| ChistAlarmOccurTime | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.3 | TimeTicks | RO | ||||||||||||||||||
column · TimeTicks · read-only · current Alarm occurence time (in hundredths of a second) since the system was last re-initialized. | |||||||||||||||||||||
| ChistAlarmTrapOid | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.4 | OBJECT IDENTIFIER | RO | ||||||||||||||||||
column · OBJECT IDENTIFIER · read-only · current Trap OID of the alarm. | |||||||||||||||||||||
| ChistAlarmParam1 | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The 1st parameter of the alarm. | |||||||||||||||||||||
| ChistAlarmParam2 | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The 2nd parameter of the alarm. | |||||||||||||||||||||
| ChistAlarmParam3 | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The 3rd parameter of the alarm. | |||||||||||||||||||||
| ChistAlarmParam4 | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The 4th parameter of the alarm. | |||||||||||||||||||||
| ChistAlarmParam5 | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The 5th parameter of the alarm. | |||||||||||||||||||||
| ChistAlarmParam6 | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The 6th parameter of the alarm. | |||||||||||||||||||||
| ChistAlarmParam7 | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The 7th parameter of the alarm. | |||||||||||||||||||||
| ChistAlarmParam8 | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.12 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The 8th parameter of the alarm. | |||||||||||||||||||||
| ChistAlarmParam9 | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.13 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The 9th parameter of the alarm. | |||||||||||||||||||||
| ChistAlarmTimeDescr | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.14 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The string representation of occurence time (YYYY/MM/DD HH:MM:SS). | |||||||||||||||||||||
| ChistAlarmSeverity | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.15 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The severity of the alarm.
| |||||||||||||||||||||
| ChistAlarmDescr | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.16 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The description of the alarm. | |||||||||||||||||||||
| TalarmConfTable | 1.3.6.1.4.1.890.1.5.13.13.2.4 | NA | |||||||||||||||||||
table · not-accessible · current Configures specified alarm definition. | |||||||||||||||||||||
| RalarmConfEntry | 1.3.6.1.4.1.890.1.5.13.13.2.4.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CalarmConfTrapIndex | 1.3.6.1.4.1.890.1.5.13.13.2.4.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current alarm index | |||||||||||||||||||||
| CalarmConfTrapOid | 1.3.6.1.4.1.890.1.5.13.13.2.4.1.2 | OBJECT IDENTIFIER | RO | ||||||||||||||||||
column · OBJECT IDENTIFIER · read-only · current alarm condition code | |||||||||||||||||||||
| CalarmConfSeverity | 1.3.6.1.4.1.890.1.5.13.13.2.4.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current alarm severity.
| |||||||||||||||||||||
| CalarmConfLogFacility | 1.3.6.1.4.1.890.1.5.13.13.2.4.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current alarm syslog-facility
| |||||||||||||||||||||
| CalarmConfTarget | 1.3.6.1.4.1.890.1.5.13.13.2.4.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current alarm issue target
| |||||||||||||||||||||
| SalarmSeveritySystem | 1.3.6.1.4.1.890.1.5.13.13.2.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Configures the minimum severity level to send out alarm notification (SNMP trap and SYSLOG) for overall system.
| |||||||||||||||||||||
| TalarmSeverityPortTable | 1.3.6.1.4.1.890.1.5.13.13.2.6 | NA | |||||||||||||||||||
table · not-accessible · current Configures the minimum severity level to send out alarm notification (SNMP trap and SYSLOG) for each port. | |||||||||||||||||||||
| RalarmSeverityPortEntry | 1.3.6.1.4.1.890.1.5.13.13.2.6.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CalarmSeverityPortThresh | 1.3.6.1.4.1.890.1.5.13.13.2.6.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This is to configure the alarm supression on per port basis based on alarm severity.
| |||||||||||||||||||||
| NalarmControl | 1.3.6.1.4.1.890.1.5.13.13.2.7 | ||||||||||||||||||||
| SsysAlarmSuppressEnable | 1.3.6.1.4.1.890.1.5.13.13.2.7.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable means no alarm trap will be sent. Only trap of alarm with event severity can be reported. Disable means no suppress.
| |||||||||||||||||||||
| TexternalAlarmTable | 1.3.6.1.4.1.890.1.5.13.13.2.8 | NA | |||||||||||||||||||
table · not-accessible · current Configures alarm input description. | |||||||||||||||||||||
| RexternalAlarmEntry | 1.3.6.1.4.1.890.1.5.13.13.2.8.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CexternalAlarmIndex | 1.3.6.1.4.1.890.1.5.13.13.2.8.1.1 | INTEGER (1..4) | RO | ||||||||||||||||||
column · INTEGER (1..4) · read-only · current External alarm index | |||||||||||||||||||||
| CexternalAlarmName | 1.3.6.1.4.1.890.1.5.13.13.2.8.1.2 | DisplayString (SIZE (0..31)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..31)) · read-write · current External alarm name | |||||||||||||||||||||
| Ndhcp | 1.3.6.1.4.1.890.1.5.13.13.3 | ||||||||||||||||||||
| NdhcpL2Agent | 1.3.6.1.4.1.890.1.5.13.13.3.1 | ||||||||||||||||||||
| TdhcpL2AgentTable | 1.3.6.1.4.1.890.1.5.13.13.3.1.1 | NA | |||||||||||||||||||
table · not-accessible · current A table that contains DHCP L2 agent configuration. | |||||||||||||||||||||
| RdhcpL2AgentEntry | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1 | NA | |||||||||||||||||||
| CdhcpL2AgentVlanId | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.1 | VlanIndex (1..4094) | RO | ||||||||||||||||||
column · VlanIndex (1..4094) · read-only · current Specify the VLAN with DHCP transparent or DHCP L2 agent function. | |||||||||||||||||||||
| CdhcpL2AgentMode | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.2 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current Specify the DHCP L2 agent mode. dhcpL2Agent(1) - DHCP L2 Agent function is enabled.
| |||||||||||||||||||||
| CdhcpL2AgentLdraEnable | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.3 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current Enable/disable Light Weight DHCPv6 Relay Agent in dhcpL2Agent mode
| |||||||||||||||||||||
| CdhcpL2AgentOpt18InterfaceIDInfo | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.5 | DisplayString (SIZE (0..127)) | RC | ||||||||||||||||||
column · DisplayString (SIZE (0..127)) · read-create · current User specific DHCP option18 dhcpL2AgentOpt82CircuitIDEnable ID info.
Info is composed by the following components
special characters except % => ~`!@#$^&*()-=_+{}<>,./
%%: equals character %
%0x00~%0xFF: represents byte value
%pname: configured port name
%ptel: configured port telephone No.
%pid: port index
%chvpi: channel vpi
%chvci: channel vci
%chid : in non DSL ATM channel, this field represents UNI VLAN ID,
in DSL ATM channel, this field represents %chvpi.%chvci
%slotid: slot index of the logic port
%svlan: SVLAN ID which DHCP client runs on
%cvlan: CVLAN ID which DHCP client runs on
%hname: host device name
%cmac1: MAC address of client, represents as XX:XX:XX:XX:XX:XX where X=0~F
%cmac2: MAC address of client, represents as XXXXXXXXXXXX where X=0~F
%cmac3: MAC address of client, represents as Byte
%dmac1: MAC address of host device, represents as XX:XX:XX:XX:XX:XX where X=0~F
%dmac2: MAC address of host device, represents as XXXXXXXXXXXX where X=0~F
%dmac3: MAC address of host device, represents as Byte
%phtype: represents as atm in ATM or represents as eth in Ethernet
%hmodel: model name of host device
%fwid: host device firmware ID
%blank: blank character | |||||||||||||||||||||
| CdhcpL2AgentOpt37RemoteIDInfo | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.7 | DisplayString (SIZE (0..127)) | RC | ||||||||||||||||||
column · DisplayString (SIZE (0..127)) · read-create · current User specific DHCP option37 remote ID info.
Info is composed by the following components
special characters except % => ~`!@#$^&*()-=_+{}<>,./
%%: equals character %
%0x00~%0xFF: represents byte value
%pname: configured port name
%ptel: configured port telephone No.
%pid: port index
%chvpi: channel vpi
%chvci: channel vci
%chid : in non DSL ATM channel, this field represents UNI VLAN ID,
in DSL ATM channel, this field represents %chvpi.%chvci
%slotid: slot index of the logic port
%svlan: SVLAN ID which DHCP client runs on
%cvlan: CVLAN ID which DHCP client runs on
%hname: host device name
%cmac1: MAC address of client, represents as XX:XX:XX:XX:XX:XX where X=0~F
%cmac2: MAC address of client, represents as XXXXXXXXXXXX where X=0~F
%cmac3: MAC address of client, represents as Byte
%dmac1: MAC address of host device, represents as XX:XX:XX:XX:XX:XX where X=0~F
%dmac2: MAC address of host device, represents as XXXXXXXXXXXX where X=0~F
%dmac3: MAC address of host device, represents as Byte
%phtype: represents as atm in ATM or represents as eth in Ethernet
%hmodel: model name of host device
%fwid: host device firmware ID
%blank: blank character | |||||||||||||||||||||
| CdhcpL2AgentOpt82CircuitIDInfo | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.9 | DisplayString (SIZE (0..127)) | RC | ||||||||||||||||||
column · DisplayString (SIZE (0..127)) · read-create · current User specific DHCP option82 circuit ID info.
Info is composed by the following components
special characters except % => ~`!@#$^&*()-=_+{}<>,./
%%: equals character %
%0x00~%0xFF: represents byte value
%pname: configured port name
%ptel: configured port telephone No.
%pid: port index
%chvpi: channel vpi
%chvci: channel vci
%chid : in non DSL ATM channel, this field represents UNI VLAN ID,
in DSL ATM channel, this field represents %chvpi.%chvci
%slotid: slot index of the logic port
%svlan: SVLAN ID which DHCP client runs on
%cvlan: CVLAN ID which DHCP client runs on
%hname: host device name
%cmac1: MAC address of client, represents as XX:XX:XX:XX:XX:XX where X=0~F
%cmac2: MAC address of client, represents as XXXXXXXXXXXX where X=0~F
%cmac3: MAC address of client, represents as Byte
%dmac1: MAC address of host device, represents as XX:XX:XX:XX:XX:XX where X=0~F
%dmac2: MAC address of host device, represents as XXXXXXXXXXXX where X=0~F
%dmac3: MAC address of host device, represents as Byte
%phtype: represents as atm in ATM or represents as eth in Ethernet
%hmodel: model name of host device
%fwid: host device firmware ID
%blank: blank character | |||||||||||||||||||||
| CdhcpL2AgentOpt82RemoteIDInfo | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.11 | DisplayString (SIZE (0..127)) | RC | ||||||||||||||||||
column · DisplayString (SIZE (0..127)) · read-create · current User specific DHCP option82 remote ID info.
Info is composed by the following components
special characters except % => ~`!@#$^&*()-=_+{}<>,./
%%: equals character %
%0x00~%0xFF: represents byte value
%pname: configured port name
%ptel: configured port telephone No.
%pid: port index
%chvpi: channel vpi
%chvci: channel vci
%chid : in non DSL ATM channel, this field represents UNI VLAN ID,
in DSL ATM channel, this field represents %chvpi.%chvci
%slotid: slot index of the logic port
%svlan: SVLAN ID which DHCP client runs on
%cvlan: CVLAN ID which DHCP client runs on
%hname: host device name
%cmac1: MAC address of client, represents as XX:XX:XX:XX:XX:XX where X=0~F
%cmac2: MAC address of client, represents as XXXXXXXXXXXX where X=0~F
%cmac3: MAC address of client, represents as Byte
%dmac1: MAC address of host device, represents as XX:XX:XX:XX:XX:XX where X=0~F
%dmac2: MAC address of host device, represents as XXXXXXXXXXXX where X=0~F
%dmac3: MAC address of host device, represents as Byte
%phtype: represents as atm in ATM or represents as eth in Ethernet
%hmodel: model name of host device
%fwid: host device firmware ID
%blank: blank character | |||||||||||||||||||||
| CdhcpL2AgentOpt82PolicyVlan | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.12 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current Select option82 policy in dhcpL2Agent mode.
| |||||||||||||||||||||
| CdhcpL2AgentRelayEnable | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.13 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current Enable/disable DHCP relay in dhcpL2Agent mode.
| |||||||||||||||||||||
| CdhcpL2AgentRelayPrimarySvrIp | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.14 | InetAddress | RC | ||||||||||||||||||
column · InetAddress · read-create · current Configure DHCP relay primary server IP in dhcpL2Agent mode. | |||||||||||||||||||||
| CdhcpL2AgentRelaySecondarySvrIp | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.15 | InetAddress | RC | ||||||||||||||||||
column · InetAddress · read-create · current Configure DHCP relay secondary server IP in dhcpL2Agent mode. | |||||||||||||||||||||
| CdhcpL2AgentRelayActSvrIndex | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.16 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current Select DHCP relay active server in dhcpL2Agent mode.
| |||||||||||||||||||||
| CdhcpL2AgentRelayMode | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.17 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current Select DHCP relay mode in dhcpL2Agent mode.
| |||||||||||||||||||||
| CdhcpL2AgentRowStatus | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.18 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| CdhcpL2AgentOpt82Linechar | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.19 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current Select option82 linechar in dhcpL2Agent mode.
| |||||||||||||||||||||
| SdhcpL2AgentOpt82Chk | 1.3.6.1.4.1.890.1.5.13.13.3.1.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/disable system to check option82 in DHCP packets from DHCP server.
| |||||||||||||||||||||
| SdhcpL2AgentOpt82PolicyMode | 1.3.6.1.4.1.890.1.5.13.13.3.1.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Select DHCP option82 policy mode.
| |||||||||||||||||||||
| NdhcpSnoop | 1.3.6.1.4.1.890.1.5.13.13.3.2 | ||||||||||||||||||||
| TdhcpSnoopPortTable | 1.3.6.1.4.1.890.1.5.13.13.3.2.1 | NA | |||||||||||||||||||
table · not-accessible · current A table that contains DHCP Snoop configuration for specified linecard ports. | |||||||||||||||||||||
| RdhcpSnoopPortEntry | 1.3.6.1.4.1.890.1.5.13.13.3.2.1.1 | NA | |||||||||||||||||||
| CdhcpSnoopPortIpMacBindingEnable | 1.3.6.1.4.1.890.1.5.13.13.3.2.1.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enables IP-MAC binding on specified linecard ports.
| |||||||||||||||||||||
| CdhcpSnoopPortMaxLeaseCount | 1.3.6.1.4.1.890.1.5.13.13.3.2.1.1.2 | INTEGER (1..32) | RW | ||||||||||||||||||
column · INTEGER (1..32) · read-write · current Configures DHCP Snooping database max lease count for specified linecard ports. | |||||||||||||||||||||
| CdhcpSnoopPortDbFlush | 1.3.6.1.4.1.890.1.5.13.13.3.2.1.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Set 1 to flush DHCP database for specified linecard ports. | |||||||||||||||||||||
| CdhcpSnoopPortStatsClear | 1.3.6.1.4.1.890.1.5.13.13.3.2.1.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Set 1 to clear all the counter in dhcpSnoopStatsTable. | |||||||||||||||||||||
| CdhcpSnoopPortPriorityVlan | 1.3.6.1.4.1.890.1.5.13.13.3.2.1.1.9 | DisplayString | RC | ||||||||||||||||||
column · DisplayString · read-create · current Configure priority VLAN of snoop database. Set 0 to clear priority VLAN configuration. | |||||||||||||||||||||
| SdhcpSnoopOverflowMode | 1.3.6.1.4.1.890.1.5.13.13.3.2.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Configures DHCP Snooping database overflow handling mode.
| |||||||||||||||||||||
| TdhcpSnoopDbTable | 1.3.6.1.4.1.890.1.5.13.13.3.2.3 | NA | |||||||||||||||||||
table · not-accessible · current A table that contains DHCP Snoop database on specified linecard ports. | |||||||||||||||||||||
| RdhcpSnoopDbEntry | 1.3.6.1.4.1.890.1.5.13.13.3.2.3.1 | NA | |||||||||||||||||||
row · not-accessible · current Show DHCP database on specified linecard ports. | |||||||||||||||||||||
| CdhcpSnoopDbIpType | 1.3.6.1.4.1.890.1.5.13.13.3.2.3.1.1 | InetAddressType | RO | ||||||||||||||||||
column · InetAddressType · read-only · current IP address type, IPv6 or IPv4.
| |||||||||||||||||||||
| CdhcpSnoopDbIp | 1.3.6.1.4.1.890.1.5.13.13.3.2.3.1.2 | InetAddress | RO | ||||||||||||||||||
column · InetAddress · read-only · current Show the IP address in the DHCP database on specified linecard ports. | |||||||||||||||||||||
| CdhcpSnoopDbVid | 1.3.6.1.4.1.890.1.5.13.13.3.2.3.1.3 | VlanIndex (1..4094) | RO | ||||||||||||||||||
column · VlanIndex (1..4094) · read-only · current Show the vid in the DHCP database on specified linecard ports. | |||||||||||||||||||||
| CdhcpSnoopDbMac | 1.3.6.1.4.1.890.1.5.13.13.3.2.3.1.4 | PhysAddress | RO | ||||||||||||||||||
column · PhysAddress · read-only · current Show the MAC address in the DHCP database on specified linecard ports. | |||||||||||||||||||||
| TdhcpSnoopStatsTable | 1.3.6.1.4.1.890.1.5.13.13.3.2.4 | NA | |||||||||||||||||||
table · not-accessible · current A table that contains DHCP stats on specified linecard ports. | |||||||||||||||||||||
| RdhcpSnoopStatsEntry | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1 | NA | |||||||||||||||||||
| CdhcpSnoopStatsOverFlow | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Show the counter when occurs overflow in DHCPv4 and DHCPv6. | |||||||||||||||||||||
| CdhcpSnoopStatsV4Discover | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Show the number of DHCPv4 Discover packets. | |||||||||||||||||||||
| CdhcpSnoopStatsV4Offer | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Show the number of DHCPv4 Offer packets. | |||||||||||||||||||||
| CdhcpSnoopStatsV4Request | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Show the number of DHCPv4 Request packets. | |||||||||||||||||||||
| CdhcpSnoopStatsV4Ack | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Show the number of DHCPv4 Ack packets. | |||||||||||||||||||||
| CdhcpSnoopStatsV4Release | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Show the number of DHCPv4 Release packets. | |||||||||||||||||||||
| CdhcpSnoopStatsV6Solicit | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Show the number of DHCPv6 Solicit packets. | |||||||||||||||||||||
| CdhcpSnoopStatsV6Advertise | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Show the number of DHCPv6 Advertise packets. | |||||||||||||||||||||
| CdhcpSnoopStatsV6Request | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Show the number of DHCPv6 Request packets. | |||||||||||||||||||||
| CdhcpSnoopStatsV6Reply | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Show the number of DHCPv6 Reply packets. | |||||||||||||||||||||
| CdhcpSnoopStatsV6Renew | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Show the number of DHCPv6 Renew packets. | |||||||||||||||||||||
| CdhcpSnoopStatsV6Rebind | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.12 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Show the number of DHCPv6 Rebind packets. | |||||||||||||||||||||
| CdhcpSnoopStatsV6Release | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.13 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Show the number of DHCPv6 Release packets. | |||||||||||||||||||||
| CdhcpSnoopStatsV6RelayForward | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.14 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Show the number of DHCPv6 Relay Forward packets. | |||||||||||||||||||||
| CdhcpSnoopStatsV6RelayReply | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.15 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Show the number of DHCPv6 Relay Reply packets. | |||||||||||||||||||||
| TdhcpStaticIpPortTable | 1.3.6.1.4.1.890.1.5.13.13.3.2.5 | NA | |||||||||||||||||||
table · not-accessible · current A table that contains DHCP Static IP filter configuration for specified linecard ports. | |||||||||||||||||||||
| RdhcpStaticIpPortEntry | 1.3.6.1.4.1.890.1.5.13.13.3.2.5.1 | NA | |||||||||||||||||||
| CipIndex | 1.3.6.1.4.1.890.1.5.13.13.3.2.5.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specified static ip Index. | |||||||||||||||||||||
| CdhcpStaticIpPortIp | 1.3.6.1.4.1.890.1.5.13.13.3.2.5.1.2 | InetAddress | RW | ||||||||||||||||||
column · InetAddress · read-write · current Configure IP address of static IP filter for specified linecard ports. | |||||||||||||||||||||
| CdhcpStaticIpFilterEnable | 1.3.6.1.4.1.890.1.5.13.13.3.2.5.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enables static IP-MAC Binding on specified linecard ports.
| |||||||||||||||||||||
| NdhcpL2AgentPort | 1.3.6.1.4.1.890.1.5.13.13.3.3 | ||||||||||||||||||||
| TdhcpL2AgentPortTable | 1.3.6.1.4.1.890.1.5.13.13.3.3.1 | NA | |||||||||||||||||||
table · not-accessible · current A table that contains DHCP configuration for specified linecard ports. | |||||||||||||||||||||
| RdhcpL2AgentPortEntry | 1.3.6.1.4.1.890.1.5.13.13.3.3.1.1 | NA | |||||||||||||||||||
| CdhcpL2AgentOpt82PolicyPort | 1.3.6.1.4.1.890.1.5.13.13.3.3.1.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Select option82 policy on specified linecard ports.
| |||||||||||||||||||||
| CdhcpL2AgentOptLdraPolicyPort | 1.3.6.1.4.1.890.1.5.13.13.3.3.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Select option LDRA policy on specified linecard ports.
| |||||||||||||||||||||
| NdhcpServer | 1.3.6.1.4.1.890.1.5.13.13.3.4 | ||||||||||||||||||||
| TdhcpServerTable | 1.3.6.1.4.1.890.1.5.13.13.3.4.1 | NA | |||||||||||||||||||
table · not-accessible · current A table that contains DHCP server configuration on specific VLAN | |||||||||||||||||||||
| RdhcpServerEntry | 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1 | NA | |||||||||||||||||||
| CdhcpServerVlanId | 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1.1 | VlanIndex (1..4094) | RO | ||||||||||||||||||
column · VlanIndex (1..4094) · read-only · current Specify the VLAN with DHCP transparent or DHCP server function. | |||||||||||||||||||||
| CdhcpServerStartAddress | 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1.2 | IpAddress | RC | ||||||||||||||||||
column · IpAddress · read-create · current The IPv4 address of the first address in the range | |||||||||||||||||||||
| CdhcpServerEndAddress | 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1.3 | IpAddress | RC | ||||||||||||||||||
column · IpAddress · read-create · current The IPv4 address of the last address in the range | |||||||||||||||||||||
| CdhpcServerSubnetMaskBit | 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1.4 | INTEGER (1..32) | RC | ||||||||||||||||||
column · INTEGER (1..32) · read-create · current This option mask option specifies the client's subnet maskbit. 0 means not use this option | |||||||||||||||||||||
| CdhpcServerGateway | 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1.5 | IpAddress | RC | ||||||||||||||||||
column · IpAddress · read-create · current This option specifies the IPv4 address for the default gateway on the client's subnet. 0.0.0.0 means not use this option | |||||||||||||||||||||
| CdhpcServerPrimaryDnsServer | 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1.6 | IpAddress | RC | ||||||||||||||||||
column · IpAddress · read-create · current This option specifies the IPv4 address for the primary dns server available to the client. 0.0.0.0 means not use both this option and dhpcServerSecondaryDnsServer | |||||||||||||||||||||
| CdhpcServerSecondaryDnsServer | 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1.7 | IpAddress | RC | ||||||||||||||||||
column · IpAddress · read-create · current This option specifies the IPv4 address for the secondary dns server available to the client. 0.0.0.0 means not use this option | |||||||||||||||||||||
| CdhcpServerRowStatus | 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1.10 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| TdhcpServerLeaseTable | 1.3.6.1.4.1.890.1.5.13.13.3.4.2 | NA | |||||||||||||||||||
table · not-accessible · current A table that contains DHCP server configuration | |||||||||||||||||||||
| RdhcpServerLeaseEntry | 1.3.6.1.4.1.890.1.5.13.13.3.4.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry of dhcpLeaseTable. | |||||||||||||||||||||
| CdhcpServerLeaseIpAddress | 1.3.6.1.4.1.890.1.5.13.13.3.4.2.1.1 | IpAddress | RO | ||||||||||||||||||
| CdhcpServerLeaseMacAddress | 1.3.6.1.4.1.890.1.5.13.13.3.4.2.1.2 | MacAddress | RO | ||||||||||||||||||
| CdhcpServerLeaseTime | 1.3.6.1.4.1.890.1.5.13.13.3.4.2.1.3 | INTEGER | RO | ||||||||||||||||||
| Nge | 1.3.6.1.4.1.890.1.5.13.13.4 | ||||||||||||||||||||
| TgeConfTable | 1.3.6.1.4.1.890.1.5.13.13.4.1 | NA | |||||||||||||||||||
table · not-accessible · current Configures for the specified GE-NNI ports. | |||||||||||||||||||||
| RgeConfEntry | 1.3.6.1.4.1.890.1.5.13.13.4.1.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CgeConfSpeed | 1.3.6.1.4.1.890.1.5.13.13.4.1.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures speed of gigabit uplink interface
speed-auto(1): the system configures uplink speed according to plugged-in transceiver module,
if a 1Gbps only transceiver detected then interface speed 1Gbps is configured
if a 10Gbps only transceiver detected then interface speed 10Gbps is configured
speed-1G-full(2): the system configures interface speed to 1Gbps and full duplex once a dual speed transceiver SFP+
module plugged in, otherwise configure it according to transceiver's speed.
speed-2500M-full(3):the system configures interface speed to 2.5Gbps and full duplex once a dual speed transceiver SFP+
module plugged in, otherwise configure it according to transceiver's speed.
speed-10G-full(4): the system configures interface speed to 10Gbps and full duplex once a dual speed transceiver SFP+
module plugged in, otherwise configure it according to transceiver's speed.
speed-100M-full(5): for GLC card interface only and not for gigabit uplink interface
speed-100M-half(6): for GLC card interface only and not for gigabit uplink interface
Default: speed-auto(1)
Reference: SFF-8472 Rev 11.0 (ftp://ftp.seagate.com/sff)
| |||||||||||||||||||||
| CgeConfAutoNego | 1.3.6.1.4.1.890.1.5.13.13.4.1.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures auto-negotiation mode of gigabit uplink interface.
10G speed do not support auto-negotiation mode.
enable(1): enable auto-negotiation mode
disable(2): disable auto-negotiation mode
Default: enable(1)
| |||||||||||||||||||||
| CgeConfFlowControl | 1.3.6.1.4.1.890.1.5.13.13.4.1.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures flow control mode of GE interface. enable(1): enable flow control disable(2): disable flow control Default: enable.
| |||||||||||||||||||||
| CgeConfSubtendMode | 1.3.6.1.4.1.890.1.5.13.13.4.1.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures flow subtend mode of GE interface. subtend(1): enable subtend mode uplink(2): enable uplink mode auto(2): enable auto mode Default: uplink(2) The traffic from subtend mode interface can be forwarded to uplink mode interface only. auto mode is that the port will be assigned the adjust mode uplink/subtend based on ring protocol.
| |||||||||||||||||||||
| CgeConfVlanTrunk | 1.3.6.1.4.1.890.1.5.13.13.4.1.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures vlan trunk of GE interface. enable(1): enable vlan trunk disable(2): disable vlan trunk Default: disable(2) The traffic from vlan trunk port will pass all vlan check.
| |||||||||||||||||||||
| NgeOps | 1.3.6.1.4.1.890.1.5.13.13.4.2 | ||||||||||||||||||||
| SgeTarget | 1.3.6.1.4.1.890.1.5.13.13.4.2.1 | PortList | RW | ||||||||||||||||||
scalar · PortList · read-write · current Configure the target GE interface (ifindex) to clear packet statistics. | |||||||||||||||||||||
| SgeOperation | 1.3.6.1.4.1.890.1.5.13.13.4.2.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Clear packet statistics on the target GE ifindex specified by 'geTarget'.
| |||||||||||||||||||||
| TgeDdmiCfgPortTable | 1.3.6.1.4.1.890.1.5.13.13.4.3 | NA | |||||||||||||||||||
table · not-accessible · current Displays current DDMI status on GE-NNI port. | |||||||||||||||||||||
| RgeDdmiCfgPortEntry | 1.3.6.1.4.1.890.1.5.13.13.4.3.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CgeDdmiTempHighAlarmThresh | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.1 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current User defined high alarm threshold of temperature of sfp port | |||||||||||||||||||||
| CgeDdmiTempLowAlarmThresh | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.2 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current User defined low alarm threshold of temperature of sfp port | |||||||||||||||||||||
| CgeDdmiVoltageHighAlarmThresh | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current User defined high alarm threshold of voltage of sfp port | |||||||||||||||||||||
| CgeDdmiVoltageLowAlarmThresh | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.4 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current User defined low alarm threshold of voltage of sfp port | |||||||||||||||||||||
| CgeDdmiTxBiasHighAlarmThresh | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.5 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current User defined high alarm threshold of tx bias of sfp port | |||||||||||||||||||||
| CgeDdmiTxBiasLowAlarmThresh | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.6 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current User defined low alarm threshold of tx bias of sfp port | |||||||||||||||||||||
| CgeDdmiTxPowerHighAlarmThresh | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.7 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current User defined high alarm threshold of tx power of sfp port | |||||||||||||||||||||
| CgeDdmiTxPowerLowAlarmThresh | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.8 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current User defined low alarm threshold of tx power of sfp port | |||||||||||||||||||||
| CgeDdmiTxPowerHighAlarmThreshdBm | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.9 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current User defined high alarm threshold of tx power of sfp port(Units:dBm) | |||||||||||||||||||||
| CgeDdmiTxPowerLowAlarmThreshdBm | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.10 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current User defined low alarm threshold of tx power of sfp port (Units:dBm) | |||||||||||||||||||||
| CgeDdmiRxPowerHighAlarmThresh | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.11 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current User defined high alarm threshold of rx power of sfp port | |||||||||||||||||||||
| CgeDdmiRxPowerLowAlarmThresh | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.12 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current User defined low alarm threshold of rx power of sfp port | |||||||||||||||||||||
| CgeDdmiRxPowerHighAlarmThreshdBm | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.13 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current User defined high alarm threshold of rx power of sfp port (Units:dBm) | |||||||||||||||||||||
| CgeDdmiRxPowerLowAlarmThreshdBm | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.14 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current User defined low alarm threshold of rx power of sfp port (Units:dBm) | |||||||||||||||||||||
| TgeDdmiTable | 1.3.6.1.4.1.890.1.5.13.13.4.4 | NA | |||||||||||||||||||
table · not-accessible · current Displays current DDMI status on GE-NNI port. | |||||||||||||||||||||
| RgeDdmiEntry | 1.3.6.1.4.1.890.1.5.13.13.4.4.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CgeDdmiVendorName | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.1 | DisplayString (SIZE (0..31)) | RO | ZyXEL | |||||||||||||||||
column · DisplayString (SIZE (0..31)) · read-only · current SFP vendor name. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CgeDdmiVendorPn | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.2 | DisplayString | RO | DAC10G-1M | |||||||||||||||||
column · DisplayString · read-only · current SFP vendor PN(Part number). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CgeDdmiTemp | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.3 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Internally measured transceive temperature in 10^(-4) Celsius. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CgeDdmiTempHighAlarm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.4 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Internally measured the high alarm threshold of transceiver temperature in 10^(-4) Celsius. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CgeDdmiTempLowAlarm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.5 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Internally measured the low alarm threshold of transceiver temperature in 10^(-4) Celsius. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CgeDdmiVolt | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.6 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Internally measured transceiver supply voltage in 10^(-4) Volts. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CgeDdmiVoltHighAlarm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.7 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Internally measured the high alarm threshold of transceiver supply voltage in 10^(-4) Volts. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CgeDdmiVoltLowAlarm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.8 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Internally measured the low alarm threshold of transceiver supply voltage in 10^(-4) Volts. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CgeDdmiTxCurr | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.9 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Measured TX bias current in 10^(-4) mA. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CgeDdmiTxCurrHighAlarm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.10 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Measured the high alarm threshold of TX bias current in 10^(-4) mA. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CgeDdmiTxCurrLowAlarm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.11 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Measured the low alarm threshold of TX bias current in 10^(-4) mA. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CgeDdmiTxPower | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.12 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Measured TX output power in 10^(-4) uW. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CgeDdmiTxPowerHighAlarm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.13 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Measured the high alarm threshold of TX output power in 10^(-4) uW. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CgeDdmiTxPowerLowAlarm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.14 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Measured the low alarm threshold of TX output power in 10^(-4) uW. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CgeDdmiRxPower | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.15 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Measured RX received optical power in 10^(-4) uW. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CgeDdmiRxPowerHighAlarm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.16 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Measured the high alarm threshold of RX received optical power in 10^(-4) uW. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CgeDdmiRxPowerLowAlarm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.17 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Measured the low alarm threshold of RX received optical power in 10^(-4) uW. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CgeDdmiTxPowerdBm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.18 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Measured TX output power in 10^(-4) dBm. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CgeDdmiTxPowerHighAlarmdBm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.19 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Measured the high alarm threshold of TX output power in 10^(-4) dBm. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CgeDdmiTxPowerLowAlarmdBm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.20 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Measured the low alarm threshold of TX output power in 10^(-4) dBm. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CgeDdmiRxPowerdBm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.21 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Measured RX received optical power in 10^(-4) dBm. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CgeDdmiRxPowerHighAlarmdBm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.22 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Measured the high alarm threshold of RX received optical power in 10^(-4) dBm. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CgeDdmiRxPowerLowAlarmdBm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.23 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Measured the low alarm threshold of RX received optical power in 10^(-4) dBm. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CgeDdmiVendorRevision | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.24 | DisplayString | RO | V1.0 | |||||||||||||||||
column · DisplayString · read-only · current SFP vendor revision. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CgeDdmiVendorSn | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.25 | DisplayString | RO | S171126000074 | |||||||||||||||||
column · DisplayString · read-only · current SFP vendor SN(Serial number). Example values from LibreNMS test devices
| |||||||||||||||||||||
| TgeStatusTable | 1.3.6.1.4.1.890.1.5.13.13.4.5 | NA | |||||||||||||||||||
table · not-accessible · current The table displays GE-NNI ports Status | |||||||||||||||||||||
| RgeStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.4.5.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CgeStatusMode | 1.3.6.1.4.1.890.1.5.13.13.4.5.1.1 | DisplayString (SIZE (0..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..31)) · read-only · current GE-NNI ports Mode | |||||||||||||||||||||
| Nhwmonitor | 1.3.6.1.4.1.890.1.5.13.13.5 | ||||||||||||||||||||
| TfanConfTable | 1.3.6.1.4.1.890.1.5.13.13.5.1 | NA | |||||||||||||||||||
table · not-accessible · current Configure the limit value of fan module, currently only control card has fan, an alarm will be raised if the sensing value higher or lower than these value. | |||||||||||||||||||||
| RfanConfEntry | 1.3.6.1.4.1.890.1.5.13.13.5.1.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CfanConfIndex | 1.3.6.1.4.1.890.1.5.13.13.5.1.1.1 | INTEGER (1..4) | RO | ||||||||||||||||||
column · INTEGER (1..4) · read-only · current FAN module index | |||||||||||||||||||||
| CfanConfHighThreshold | 1.3.6.1.4.1.890.1.5.13.13.5.1.1.2 | INTEGER (0..15000) | RW | 10000 | |||||||||||||||||
column · INTEGER (0..15000) · read-write · current FAN speed high threshold
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CfanConfLowThreshold | 1.3.6.1.4.1.890.1.5.13.13.5.1.1.3 | INTEGER (0..15000) | RW | 2000 | |||||||||||||||||
column · INTEGER (0..15000) · read-write · current FAN speed low threshold
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TtemperatureConfTable | 1.3.6.1.4.1.890.1.5.13.13.5.2 | NA | |||||||||||||||||||
table · not-accessible · current Configure the limit value of temperature module, an alarm will be raised if the sensing value higher or lower than these value. | |||||||||||||||||||||
| RtemperatureConfEntry | 1.3.6.1.4.1.890.1.5.13.13.5.2.1 | NA | |||||||||||||||||||
row · not-accessible · current This is a temperature detection configuration entry to define temperature alarm high and low threshold. | |||||||||||||||||||||
| CtemperatureConfIndex | 1.3.6.1.4.1.890.1.5.13.13.5.2.1.1 | INTEGER (1..3) | RO | ||||||||||||||||||
column · INTEGER (1..3) · read-only · current The temperatureConfIndex indicates temperature sensor point where: 1 - is a sensing point near DC/DC power brick 2 - is a sensing point near Analog Front End (AFE) chip 3 - is a sensing point near CPU. | |||||||||||||||||||||
| CtemperatureConfHighThreshold | 1.3.6.1.4.1.890.1.5.13.13.5.2.1.2 | INTEGER (-50..106) | RW | 106 | |||||||||||||||||
column · INTEGER (-50..106) · read-write · current Temperature high threshold. if card type is olc3416-22, then the range is -50 ~ 106 and another card type is -50 ~ 100
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtemperatureConfLowThreshold | 1.3.6.1.4.1.890.1.5.13.13.5.2.1.3 | INTEGER (-50..106) | RW | -40 | |||||||||||||||||
column · INTEGER (-50..106) · read-write · current Temperature low threshold. if card type is olc3416-22, then the range is -50 ~ 106 and another card type is -50 ~ 100
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtemperatureConfCardType | 1.3.6.1.4.1.890.1.5.13.13.5.2.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Card type of temperature threshold
| |||||||||||||||||||||
| TvoltageConfTable | 1.3.6.1.4.1.890.1.5.13.13.5.3 | NA | |||||||||||||||||||
table · not-accessible · current Configure the limit value of voltage module, an alarm will be raised if the sensing value higher or lower than these value. | |||||||||||||||||||||
| RvoltageConfEntry | 1.3.6.1.4.1.890.1.5.13.13.5.3.1 | NA | |||||||||||||||||||
row · not-accessible · current This is a voltage detection configuration entry to define voltage alarm high and low threshold.
| |||||||||||||||||||||
| CvoltageConfIndex | 1.3.6.1.4.1.890.1.5.13.13.5.3.1.1 | INTEGER (1..5) | RO | ||||||||||||||||||
column · INTEGER (1..5) · read-only · current Voltage sensor is indexed from 1 to 5. voltage sensor 1 - monitor +1.05Vdc source voltage sensor 2 - monitor +1.2Vdc source voltage sensor 3 - monitor +1.8Vdc source voltage sensor 4 - monitor +3.3Vdc source voltage sensor 5 - monitor +14.5Vdc source | |||||||||||||||||||||
| CvoltageConfHighThreshold | 1.3.6.1.4.1.890.1.5.13.13.5.3.1.2 | INTEGER (0..25000) | RW | 1097 | |||||||||||||||||
column · INTEGER (0..25000) · read-write · current Voltage high threshold.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CvoltageConfLowThreshold | 1.3.6.1.4.1.890.1.5.13.13.5.3.1.3 | INTEGER (0..25000) | RW | 953 | |||||||||||||||||
column · INTEGER (0..25000) · read-write · current Voltage low threshold.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CvoltageConfCardType | 1.3.6.1.4.1.890.1.5.13.13.5.3.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Card type of Voltage threshold
| |||||||||||||||||||||
| TfanStatsTable | 1.3.6.1.4.1.890.1.5.13.13.5.4 | NA | |||||||||||||||||||
table · not-accessible · current A table that contains rpm information about the fans. | |||||||||||||||||||||
| RfanStatsEntry | 1.3.6.1.4.1.890.1.5.13.13.5.4.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CfanRpmCurValue | 1.3.6.1.4.1.890.1.5.13.13.5.4.1.1 | INTEGER | RO | 8766 | |||||||||||||||||
column · INTEGER · read-only · current The current rpm of the fan. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CfanRpmMaxValue | 1.3.6.1.4.1.890.1.5.13.13.5.4.1.2 | INTEGER | RO | 9473 | |||||||||||||||||
column · INTEGER · read-only · current The maximum rpm ever performed by the fan. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CfanRpmMinValue | 1.3.6.1.4.1.890.1.5.13.13.5.4.1.3 | INTEGER | RO | 6561 | |||||||||||||||||
column · INTEGER · read-only · current The minimum rpm ever performed by the fan. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CfanRpmAvgValue | 1.3.6.1.4.1.890.1.5.13.13.5.4.1.4 | INTEGER | RO | 8773 | |||||||||||||||||
column · INTEGER · read-only · current The average rpm performed by the fan. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CfanRpmDescr | 1.3.6.1.4.1.890.1.5.13.13.5.4.1.5 | DisplayString | RO | FAN1 | |||||||||||||||||
column · DisplayString · read-only · current The description of the fan (e.g. location, function, etc.). Example values from LibreNMS test devices
| |||||||||||||||||||||
| TtemperatureStatsTable | 1.3.6.1.4.1.890.1.5.13.13.5.5 | NA | |||||||||||||||||||
table · not-accessible · current A table that contains temperature information. | |||||||||||||||||||||
| RtemperatureStatsEntry | 1.3.6.1.4.1.890.1.5.13.13.5.5.1 | NA | |||||||||||||||||||
row · not-accessible · current This is a temperature statistatics since system restarted. | |||||||||||||||||||||
| CtemperatureCurValue | 1.3.6.1.4.1.890.1.5.13.13.5.5.1.1 | INTEGER | RO | 65 | |||||||||||||||||
column · INTEGER · read-only · current The current temperature detected by the sensor.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtemperatureMaxValue | 1.3.6.1.4.1.890.1.5.13.13.5.5.1.2 | INTEGER | RO | 70 | |||||||||||||||||
column · INTEGER · read-only · current The maximum temperature detected by the sensor since system restarted.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtemperatureMinValue | 1.3.6.1.4.1.890.1.5.13.13.5.5.1.3 | INTEGER | RO | 33 | |||||||||||||||||
column · INTEGER · read-only · current The minimum temperature detected by the sensor since system restarted.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtemperatureAvgValue | 1.3.6.1.4.1.890.1.5.13.13.5.5.1.4 | INTEGER | RO | 64 | |||||||||||||||||
column · INTEGER · read-only · current The average temperature is calculated/aveaged by software based on current temperature values since system restarted.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtemperatureDescr | 1.3.6.1.4.1.890.1.5.13.13.5.5.1.5 | DisplayString | RO | POWER | |||||||||||||||||
column · DisplayString · read-only · current The description of the temperature sensor (e.g. CPU for temperatureConfIndex 3). Example values from LibreNMS test devices
| |||||||||||||||||||||
| TvoltageStatsTable | 1.3.6.1.4.1.890.1.5.13.13.5.6 | NA | |||||||||||||||||||
table · not-accessible · current A table that contains voltage information about the system. | |||||||||||||||||||||
| RvoltageStatsEntry | 1.3.6.1.4.1.890.1.5.13.13.5.6.1 | NA | |||||||||||||||||||
row · not-accessible · current This is a voltage statistics since system restarted.
| |||||||||||||||||||||
| CvoltageCurValue | 1.3.6.1.4.1.890.1.5.13.13.5.6.1.1 | INTEGER | RO | 1022 | |||||||||||||||||
column · INTEGER · read-only · current The current voltage detected by the sensor.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CvoltageMaxValue | 1.3.6.1.4.1.890.1.5.13.13.5.6.1.2 | INTEGER | RO | 1022 | |||||||||||||||||
column · INTEGER · read-only · current The maximum voltage detected by the sensor since system restarted.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CvoltageMinValue | 1.3.6.1.4.1.890.1.5.13.13.5.6.1.3 | INTEGER | RO | 1009 | |||||||||||||||||
column · INTEGER · read-only · current The minimum voltage detected by the sensor since system restarted.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CvoltageAvgValue | 1.3.6.1.4.1.890.1.5.13.13.5.6.1.4 | INTEGER | RO | 1014 | |||||||||||||||||
column · INTEGER · read-only · current The average voltage calculated/averaged by software based on current voltage values since system restarted.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CvoltageNominalValue | 1.3.6.1.4.1.890.1.5.13.13.5.6.1.5 | INTEGER | RO | 1025 | |||||||||||||||||
column · INTEGER · read-only · current The nominal voltage which the power should be supplied. This is information from hardware board design
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CvoltageDescr | 1.3.6.1.4.1.890.1.5.13.13.5.6.1.6 | DisplayString | RO | +1.0V | |||||||||||||||||
column · DisplayString · read-only · current The description of the voltage (e.g. +1.05V, a 1.05 Vdc voltage input). Example values from LibreNMS test devices
| |||||||||||||||||||||
| TfanModeConfTable | 1.3.6.1.4.1.890.1.5.13.13.5.7 | NA | |||||||||||||||||||
table · not-accessible · current Configure the fan mode of fan module. | |||||||||||||||||||||
| RfanModeConfEntry | 1.3.6.1.4.1.890.1.5.13.13.5.7.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CfanModeConfGroup | 1.3.6.1.4.1.890.1.5.13.13.5.7.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current FAN group
| |||||||||||||||||||||
| CfanModeConfStatus | 1.3.6.1.4.1.890.1.5.13.13.5.7.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Set the fan mode. average : fan duty-cycle with average temperature immediate : fan duty-cycle with immediate temperature fix : the mode displayed based on the setting of duty-cycle in fanDutyCycleConfTable by user
| |||||||||||||||||||||
| TfanDutyCycleConfTable | 1.3.6.1.4.1.890.1.5.13.13.5.8 | NA | |||||||||||||||||||
table · not-accessible · current Configure the duty cycle of fan module. | |||||||||||||||||||||
| RfanDutyCycleConfEntry | 1.3.6.1.4.1.890.1.5.13.13.5.8.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CfanDutyCycleConfGroup | 1.3.6.1.4.1.890.1.5.13.13.5.8.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current FAN group
| |||||||||||||||||||||
| CfanDutyCycleConfPercentage | 1.3.6.1.4.1.890.1.5.13.13.5.8.1.2 | INTEGER (0..100) | RW | ||||||||||||||||||
column · INTEGER (0..100) · read-write · current FAN duty cycle percentage | |||||||||||||||||||||
| TcpuStatsTable | 1.3.6.1.4.1.890.1.5.13.13.5.9 | NA | |||||||||||||||||||
table · not-accessible · current Show cpu status. | |||||||||||||||||||||
| RcpuStatsEntry | 1.3.6.1.4.1.890.1.5.13.13.5.9.1 | NA | |||||||||||||||||||
row · not-accessible · current Display the status of CPU loading. Index 0: Average CPU loading for the system. Index 1 ~ 8: CPU loading for per core.
| |||||||||||||||||||||
| CcpuStatsIndex | 1.3.6.1.4.1.890.1.5.13.13.5.9.1.1 | INTEGER | RO | 1 | |||||||||||||||||
column · INTEGER · read-only · current CPU Status index. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcpuStatsHighThreshold | 1.3.6.1.4.1.890.1.5.13.13.5.9.1.2 | INTEGER | RO | 90 | |||||||||||||||||
column · INTEGER · read-only · current The High Threshold of CPU loading. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcpuStatsCurrent | 1.3.6.1.4.1.890.1.5.13.13.5.9.1.3 | Gauge32 | RO | 44 | |||||||||||||||||
column · Gauge32 · read-only · current Current CPU loading. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmemStatsTable | 1.3.6.1.4.1.890.1.5.13.13.5.10 | NA | |||||||||||||||||||
table · not-accessible · current Show mem status. | |||||||||||||||||||||
| RmemStatsEntry | 1.3.6.1.4.1.890.1.5.13.13.5.10.1 | NA | |||||||||||||||||||
| CmemStatsIndex | 1.3.6.1.4.1.890.1.5.13.13.5.10.1.1 | INTEGER | RO | 1 | |||||||||||||||||
column · INTEGER · read-only · current MEM Status index. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmemStatsHighThreshold | 1.3.6.1.4.1.890.1.5.13.13.5.10.1.2 | DisplayString (SIZE (1..4)) | RW | 97 | |||||||||||||||||
column · DisplayString (SIZE (1..4)) · read-write · current The High Threshold of memory. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmemStatsCurrent | 1.3.6.1.4.1.890.1.5.13.13.5.10.1.3 | DisplayString | RO | 39.0 | |||||||||||||||||
column · DisplayString · read-only · current Current Memory loading. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TpowerStatsTable | 1.3.6.1.4.1.890.1.5.13.13.5.11 | NA | |||||||||||||||||||
table · not-accessible · current A table that display the current vlaue for power module (only support on IES4204, not support on IES5206) | |||||||||||||||||||||
| RpowerStatsEntry | 1.3.6.1.4.1.890.1.5.13.13.5.11.1 | NA | |||||||||||||||||||
row · not-accessible · current The entry of powerStatsTable (only support on IES4204, not support on IES5206)
| |||||||||||||||||||||
| CpowerStatsIndex | 1.3.6.1.4.1.890.1.5.13.13.5.11.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The index for the power module
| |||||||||||||||||||||
| CpowerStatsVoltage | 1.3.6.1.4.1.890.1.5.13.13.5.11.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Current power voltage(V)
| |||||||||||||||||||||
| CpowerStatsTemperature | 1.3.6.1.4.1.890.1.5.13.13.5.11.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Current power temperature(C)
| |||||||||||||||||||||
| CpowerStatsCurrent | 1.3.6.1.4.1.890.1.5.13.13.5.11.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Current power current(A)
| |||||||||||||||||||||
| CpowerStatsPower | 1.3.6.1.4.1.890.1.5.13.13.5.11.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Current power power(W)
| |||||||||||||||||||||
| Nigmpmld | 1.3.6.1.4.1.890.1.5.13.13.6 | ||||||||||||||||||||
| SigmpmldMode | 1.3.6.1.4.1.890.1.5.13.13.6.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current IGMP or MLD packet non-mvlan handling mode. disable(0) - disable IGMP or MLD function snooping(2) - packets are handled IGMP or MLD snopping function proxy(3) - packets are handled IGMP or MLD proxy function proxyReport(4) - packets are handled IGMP or MLD proxy Report function
| |||||||||||||||||||||
| SigmpmldVersion | 1.3.6.1.4.1.890.1.5.13.13.6.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Configures IGMP/MLD protocol version.
| |||||||||||||||||||||
| SigmpmldLeaveMode | 1.3.6.1.4.1.890.1.5.13.13.6.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Configures IGMP/MLD leave mode Fast-leave:1 After checking last source IP is leaved, group timeout is immediately. No G-SQ send out. Last-member-query:2 After checking last source IP is leaved, send G-SQ. Group starts to wait for response in last-member-query interval. If no response, group timeout. Every-leave:3 Each time leave report is received, send G-SQ. Group starts to wait for response even other source IPs existed. If no response, group timeout. If lots of different source IP leave in same group in last-member-query interval, only one G-SQ would be sent out to prevent lots of response.
| |||||||||||||||||||||
| SigmpmldLastMemberQueryInterval | 1.3.6.1.4.1.890.1.5.13.13.6.4 | INTEGER (200..1000) | RW | ||||||||||||||||||
scalar · INTEGER (200..1000) · read-write · current Configures last member query interval 200~1000 in ms, in step of 100
| |||||||||||||||||||||
| SigmpmldLastMemberQueryRobustness | 1.3.6.1.4.1.890.1.5.13.13.6.5 | INTEGER (1..5) | RW | ||||||||||||||||||
scalar · INTEGER (1..5) · read-write · current Configures last member query robusteness. | |||||||||||||||||||||
| SigmpmldGeneralQueryInterval | 1.3.6.1.4.1.890.1.5.13.13.6.6 | INTEGER (10..300) | RW | ||||||||||||||||||
scalar · INTEGER (10..300) · read-write · current Configures genery query query interval.
| |||||||||||||||||||||
| SigmpmldGeneralQueryRobustness | 1.3.6.1.4.1.890.1.5.13.13.6.7 | INTEGER (1..5) | RW | ||||||||||||||||||
scalar · INTEGER (1..5) · read-write · current Configures genery query robustness. | |||||||||||||||||||||
| SigmpmldGeneralQueryMaxRespTime | 1.3.6.1.4.1.890.1.5.13.13.6.8 | INTEGER (1..10) | RW | ||||||||||||||||||
scalar · INTEGER (1..10) · read-write · current Configures genery query maximum response time.
| |||||||||||||||||||||
| TigmpmldConfPortTable | 1.3.6.1.4.1.890.1.5.13.13.6.9 | NA | |||||||||||||||||||
table · not-accessible · current igmp/mld Conf Port Table. | |||||||||||||||||||||
| RigmpmldConfPortEntry | 1.3.6.1.4.1.890.1.5.13.13.6.9.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CigmpmldConfPortMaxGroupCount | 1.3.6.1.4.1.890.1.5.13.13.6.9.1.1 | INTEGER (1..16) | RW | ||||||||||||||||||
column · INTEGER (1..16) · read-write · current Configures maximum group counts on the specified UNI ports. | |||||||||||||||||||||
| CigmpmldConfPortPrivilegeEnable | 1.3.6.1.4.1.890.1.5.13.13.6.9.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enables group privilege checking on specified UNI ports.
| |||||||||||||||||||||
| CigmpmldConfPortCacMaxBandwidth | 1.3.6.1.4.1.890.1.5.13.13.6.9.1.4 | INTEGER (0..100) | RW | ||||||||||||||||||
column · INTEGER (0..100) · read-write · current Configures maximum CAC bandwidth on the specified UNI ports. 0 means no limited
| |||||||||||||||||||||
| CigmpmldConfPortMaxMsgCount | 1.3.6.1.4.1.890.1.5.13.13.6.9.1.5 | INTEGER (1..32) | RW | ||||||||||||||||||
column · INTEGER (1..32) · read-write · current Configures maximum message counts on the specified UNI ports. | |||||||||||||||||||||
| NgroupPrivilege | 1.3.6.1.4.1.890.1.5.13.13.6.10 | ||||||||||||||||||||
| SigmpmldMaxNumOfGroupPrivilegeProfiles | 1.3.6.1.4.1.890.1.5.13.13.6.10.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The maximum number of group privilege profiles supported by the system. | |||||||||||||||||||||
| TigmpmldGroupPrivilegeProfileTable | 1.3.6.1.4.1.890.1.5.13.13.6.10.2 | NA | |||||||||||||||||||
table · not-accessible · current Multicast group privilege profile table | |||||||||||||||||||||
| RigmpmldGroupPrivilegeProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CigmpmldGroupPrivilegeProfileName | 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.1 | DisplayString (SIZE (1..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (1..31)) · read-only · current Profile name | |||||||||||||||||||||
| CigmpmldGroupPrivilegeProfileIndex | 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.2 | INTEGER (1..16) | RO | ||||||||||||||||||
column · INTEGER (1..16) · read-only · current Configures a privilege entry of specified group privilege profile. | |||||||||||||||||||||
| CigmpmldGroupPrivilegeProfileAddressType | 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.3 | InetAddressType | RC | ||||||||||||||||||
column · InetAddressType · read-create · current The type of address format used for the
igmpmldGroupPrivilegeProfileStartIp object and
igmpmldGroupPrivilegeProfileEndIp object.
| |||||||||||||||||||||
| CigmpmldGroupPrivilegeProfileStartIp | 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.4 | InetAddress | RC | ||||||||||||||||||
column · InetAddress · read-create · current ipv4: 224.0.0.0 ~ 239.255.255.255, ipv6: ff00::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff | |||||||||||||||||||||
| CigmpmldGroupPrivilegeProfileEndIp | 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.5 | InetAddress | RC | ||||||||||||||||||
column · InetAddress · read-create · current ipv4: 224.0.0.0 ~ 239.255.255.255, ipv6: ff00::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff | |||||||||||||||||||||
| CigmpmldGroupPrivilegeProfilePrivilege | 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.6 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current forbid: deny groups delivery permit: allows groups delivery. preview: allows groups preview.
| |||||||||||||||||||||
| CigmpmldGroupPrivilegeProfilePrivilegePreviewLength | 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.7 | INTEGER (10..300) | RC | ||||||||||||||||||
column · INTEGER (10..300) · read-create · current length timer of preview privilege
| |||||||||||||||||||||
| CigmpmldGroupPrivilegeProfilePrivilegePreviewInterval | 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.8 | INTEGER (10..300) | RC | ||||||||||||||||||
column · INTEGER (10..300) · read-create · current interval timer of preview privilege
| |||||||||||||||||||||
| CigmpmldGroupPrivilegeProfilePrivilegePreviewCount | 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.9 | INTEGER (1..10) | RC | ||||||||||||||||||
column · INTEGER (1..10) · read-create · current preview count | |||||||||||||||||||||
| CigmpmldGroupPrivilegeProfilePrivilegePreviewReset | 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.10 | INTEGER (30..86400) | RC | ||||||||||||||||||
column · INTEGER (30..86400) · read-create · current reset timer of preview privilege
| |||||||||||||||||||||
| CigmpmldGroupPrivilegeProfileCacBandwidth | 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.11 | INTEGER (0..100) | RC | ||||||||||||||||||
column · INTEGER (0..100) · read-create · current Multicast channel bandwidth for channel specified
| |||||||||||||||||||||
| CigmpmldGroupPrivilegeProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.12 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. To destroy the whole profile directly, use igmpmldGroupPrivilegeProfileIndex 0 to indicate this case. | |||||||||||||||||||||
| TigmpmldGroupPrivilegePortTable | 1.3.6.1.4.1.890.1.5.13.13.6.10.3 | NA | |||||||||||||||||||
table · not-accessible · current Configures group privilege profile to UNI ports | |||||||||||||||||||||
| RigmpmldGroupPrivilegePortEntry | 1.3.6.1.4.1.890.1.5.13.13.6.10.3.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CigmpmldGroupPrivilegePortEntryRowStatus | 1.3.6.1.4.1.890.1.5.13.13.6.10.3.1.1 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| Nmvlan | 1.3.6.1.4.1.890.1.5.13.13.6.11 | ||||||||||||||||||||
| SigmpmldMaxNumOfMvlan | 1.3.6.1.4.1.890.1.5.13.13.6.11.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The maximum number of MVLAN supported by the system. | |||||||||||||||||||||
| TigmpmldMvlanTable | 1.3.6.1.4.1.890.1.5.13.13.6.11.2 | NA | |||||||||||||||||||
| RigmpmldMvlanEntry | 1.3.6.1.4.1.890.1.5.13.13.6.11.2.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CigmpmldMvlanId | 1.3.6.1.4.1.890.1.5.13.13.6.11.2.1.1 | VlanIndex (1..4094) | RO | ||||||||||||||||||
column · VlanIndex (1..4094) · read-only · current Specified MVLAN ID. | |||||||||||||||||||||
| CigmpmldMvlanRowStatus | 1.3.6.1.4.1.890.1.5.13.13.6.11.2.1.2 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| CigmpmldMvlanPbit | 1.3.6.1.4.1.890.1.5.13.13.6.11.2.1.3 | INTEGER (0..8) | RW | ||||||||||||||||||
column · INTEGER (0..8) · read-write · current Configure the priority for specified mvlan group proxy report/leave/query, snooping report/leave/LMQ. <pbit>: 0~8. default 8. 8 stands for using incoming vlan, but auto-genetated query/report uses priority 7. | |||||||||||||||||||||
| TigmpmldMvlanPortTable | 1.3.6.1.4.1.890.1.5.13.13.6.11.3 | NA | |||||||||||||||||||
table · not-accessible · current Joins specified UNI ports to MVLAN. | |||||||||||||||||||||
| RigmpmldMvlanPortEntry | 1.3.6.1.4.1.890.1.5.13.13.6.11.3.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CigmpmldMvlanPortUniVlan | 1.3.6.1.4.1.890.1.5.13.13.6.11.3.1.1 | VlanIndex (0..4094) | RC | ||||||||||||||||||
column · VlanIndex (0..4094) · read-create · current Specifies the egress VLAN ID, 0 means untag. | |||||||||||||||||||||
| CigmpmldMvlanPortRowStatus | 1.3.6.1.4.1.890.1.5.13.13.6.11.3.1.2 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| TigmpmldMvlanMapTable | 1.3.6.1.4.1.890.1.5.13.13.6.11.4 | NA | |||||||||||||||||||
table · not-accessible · current Configures N:1 VLAN mapping by group address. | |||||||||||||||||||||
| RigmpmldMvlanMapEntry | 1.3.6.1.4.1.890.1.5.13.13.6.11.4.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CigmpmldMvlanMapIndex | 1.3.6.1.4.1.890.1.5.13.13.6.11.4.1.1 | INTEGER (1..16) | RO | ||||||||||||||||||
column · INTEGER (1..16) · read-only · current Configures a mapping entry of mvlan map table. | |||||||||||||||||||||
| CigmpmldMvlanMapStartIp | 1.3.6.1.4.1.890.1.5.13.13.6.11.4.1.2 | InetAddress | RC | ||||||||||||||||||
column · InetAddress · read-create · current ipv4: 224.0.0.0 ~ 239.255.255.255, ipv6: ff00::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff | |||||||||||||||||||||
| CigmpmldMvlanMapEndIp | 1.3.6.1.4.1.890.1.5.13.13.6.11.4.1.3 | InetAddress | RC | ||||||||||||||||||
column · InetAddress · read-create · current ipv4: 224.0.0.0 ~ 239.255.255.255, ipv6: ff00::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff | |||||||||||||||||||||
| CigmpmldMvlanMapRowStatus | 1.3.6.1.4.1.890.1.5.13.13.6.11.4.1.4 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| Ngroup | 1.3.6.1.4.1.890.1.5.13.13.6.12 | ||||||||||||||||||||
| TigmpmldMvlanGroupTable | 1.3.6.1.4.1.890.1.5.13.13.6.12.3 | NA | |||||||||||||||||||
table · not-accessible · current This table includes igmpmld group by mvlan information. | |||||||||||||||||||||
| RigmpmldMvlanGroupEntry | 1.3.6.1.4.1.890.1.5.13.13.6.12.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in igmpmldMvlanGroupTable. | |||||||||||||||||||||
| CigmpmldMvlanGroupId | 1.3.6.1.4.1.890.1.5.13.13.6.12.3.1.1 | VlanIndex (1..4094) | RO | ||||||||||||||||||
column · VlanIndex (1..4094) · read-only · current Specified MVLAN ID. | |||||||||||||||||||||
| CigmpmldMvlanGroupAddressType | 1.3.6.1.4.1.890.1.5.13.13.6.12.3.1.2 | InetAddressType | RO | ||||||||||||||||||
column · InetAddressType · read-only · current The type of address format used for the igmpmldGroupAddress object.
| |||||||||||||||||||||
| CigmpmldMvlanGroupAddress | 1.3.6.1.4.1.890.1.5.13.13.6.12.3.1.3 | InetAddress | RO | ||||||||||||||||||
column · InetAddress · read-only · current igmpmld group address | |||||||||||||||||||||
| CigmpmldMvlanGroupNumberOfMembers | 1.3.6.1.4.1.890.1.5.13.13.6.12.3.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current number Of group members | |||||||||||||||||||||
| CigmpmldMvlanGroupNumberOfNewJoinedMembers | 1.3.6.1.4.1.890.1.5.13.13.6.12.3.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current number Of new joined members | |||||||||||||||||||||
| CigmpmldMvlanGroupNumberOfLeftMembers | 1.3.6.1.4.1.890.1.5.13.13.6.12.3.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current number Of left members | |||||||||||||||||||||
| TigmpmldMvlanGroupPortTable | 1.3.6.1.4.1.890.1.5.13.13.6.12.4 | NA | |||||||||||||||||||
table · not-accessible · current This table includes igmpmld Group port by mvlan information. | |||||||||||||||||||||
| RigmpmldMvlanGroupPortEntry | 1.3.6.1.4.1.890.1.5.13.13.6.12.4.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in igmpmldGroupPortTable. | |||||||||||||||||||||
| CigmpmldMvlanGroupCreateTime | 1.3.6.1.4.1.890.1.5.13.13.6.12.4.1.1 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current createTime of igmpmld group | |||||||||||||||||||||
| CigmpmldMvlanGroupPortBandwidth | 1.3.6.1.4.1.890.1.5.13.13.6.12.4.1.2 | INTEGER (0..100) | RO | ||||||||||||||||||
column · INTEGER (0..100) · read-only · current bandwidth of igmpmld group
| |||||||||||||||||||||
| CigmpmldMvlanGroupPortPrivilege | 1.3.6.1.4.1.890.1.5.13.13.6.12.4.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current privilege of igmpmld group
| |||||||||||||||||||||
| CigmpmldMvlanGroupPortState | 1.3.6.1.4.1.890.1.5.13.13.6.12.4.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current state of igmpmld group
| |||||||||||||||||||||
| TmgmdQuerierIpTable | 1.3.6.1.4.1.890.1.5.13.13.6.12.5 | NA | |||||||||||||||||||
table · not-accessible · current This table includes querier IP by mvlan information. | |||||||||||||||||||||
| RmgmdQuerierIpEntry | 1.3.6.1.4.1.890.1.5.13.13.6.12.5.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in mgmdQuerierIpTable. | |||||||||||||||||||||
| CmgmdQuerierIpVid | 1.3.6.1.4.1.890.1.5.13.13.6.12.5.1.1 | VlanIndex (1..4094) | RO | ||||||||||||||||||
column · VlanIndex (1..4094) · read-only · current Specified MVLAN ID. | |||||||||||||||||||||
| CmgmdQuerierIpAddressType | 1.3.6.1.4.1.890.1.5.13.13.6.12.5.1.2 | InetAddressType | RO | ||||||||||||||||||
column · InetAddressType · read-only · current The type of address format used for the mgmdQuerierIpAddress object.
| |||||||||||||||||||||
| CmgmdQuerierIpAddress | 1.3.6.1.4.1.890.1.5.13.13.6.12.5.1.3 | InetAddress | RO | ||||||||||||||||||
column · InetAddress · read-only · current igmpmld QuerierIp address | |||||||||||||||||||||
| TmgmdClientSrcIpTable | 1.3.6.1.4.1.890.1.5.13.13.6.12.6 | NA | |||||||||||||||||||
table · not-accessible · current This table includes client source IP on per Group. | |||||||||||||||||||||
| RmgmdClientSrcIpEntry | 1.3.6.1.4.1.890.1.5.13.13.6.12.6.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in mgmdClientSrcIpTable. | |||||||||||||||||||||
| CmgmdClientSrcIpIndex | 1.3.6.1.4.1.890.1.5.13.13.6.12.6.1.1 | INTEGER | RO | ||||||||||||||||||
| CmgmdClientSrcIpAddressType | 1.3.6.1.4.1.890.1.5.13.13.6.12.6.1.2 | InetAddressType | RO | ||||||||||||||||||
column · InetAddressType · read-only · current
| |||||||||||||||||||||
| CmgmdClientSrcIpAddress | 1.3.6.1.4.1.890.1.5.13.13.6.12.6.1.3 | InetAddress | RO | ||||||||||||||||||
| NigmpmldStatistics | 1.3.6.1.4.1.890.1.5.13.13.6.13 | ||||||||||||||||||||
| TigmpmldStatisticsPortTable | 1.3.6.1.4.1.890.1.5.13.13.6.13.5 | NA | |||||||||||||||||||
table · not-accessible · current This table includes IGMP/MLD port statistics information | |||||||||||||||||||||
| RigmpmldStatisticsPortEntry | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1 | NA | |||||||||||||||||||
| CigmpmldStatisticsPortQueryRx | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The total number of IGMP query messages received. | |||||||||||||||||||||
| CigmpmldStatisticsPortQueryTx | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The total number of IGMP query messages transmitted. | |||||||||||||||||||||
| CigmpmldStatisticsPortReportRx | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.16 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The total number of IGMP/MLD report messages received | |||||||||||||||||||||
| CigmpmldStatisticsPortReportTx | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.17 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The total number of IGMP/MLD report messages transmitted | |||||||||||||||||||||
| CigmpmldStatisticsPortReportJoinIgmpv2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.18 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The total number of IGMPv2 join type report messages | |||||||||||||||||||||
| CigmpmldStatisticsPortReportLeaveIgmpv2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.19 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The total number of IGMPv2 leave type report messages | |||||||||||||||||||||
| CigmpmldStatisticsPortReportDropIgmp | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.20 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The total number of IGMP dropped report messages | |||||||||||||||||||||
| CigmpmldStatisticsPortReportJoinMldv1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.22 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The total number of MLDv1 join type report messages | |||||||||||||||||||||
| CigmpmldStatisticsPortReportLeaveMldv1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.23 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The total number of MLDv1 leave type report messages | |||||||||||||||||||||
| CigmpmldStatisticsPortReportDropMld | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.24 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The total number of MLD dropped report messages | |||||||||||||||||||||
| CigmpmldStatisticsPortReportIgmpv3 | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.25 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The total number of IGMPv3 report messages | |||||||||||||||||||||
| CigmpmldStatisticsPortReportMldv2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.26 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The total number of MLDv2 report messages | |||||||||||||||||||||
| CigmpmldStatisticsPortQueryDropIgmp | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.27 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The total number of IGMP dropped query messages | |||||||||||||||||||||
| CigmpmldStatisticsPortQueryDropMld | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.28 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The total number of MLD dropped query messages | |||||||||||||||||||||
| CigmpmldStatisticsPortQueryIgmpv2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.29 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The total number of IGMPv2 query messages | |||||||||||||||||||||
| CigmpmldStatisticsPortQueryIgmpv3 | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.30 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The total number of IGMPv3 query messages | |||||||||||||||||||||
| CigmpmldStatisticsPortQueryMldv1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.31 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The total number of MLDv1 query messages | |||||||||||||||||||||
| CigmpmldStatisticsPortQueryMldv2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.32 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The total number of Mldv2 query messages | |||||||||||||||||||||
| TmgmdStatisticsPortTable | 1.3.6.1.4.1.890.1.5.13.13.6.13.6 | NA | |||||||||||||||||||
table · not-accessible · current This table includes IGMP/MLD port statistics information | |||||||||||||||||||||
| RmgmdStatisticsPortEntry | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1 | NA | |||||||||||||||||||
| CigmpCounterPortRxQueryTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Total accepted IGMP RX query | |||||||||||||||||||||
| CigmpCounterPortRxQueryV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted IGMP RX V1 query | |||||||||||||||||||||
| CigmpCounterPortRxQueryV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted IGMP RX V2 query | |||||||||||||||||||||
| CigmpCounterPortRxQueryV3 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted IGMP RX V3 query | |||||||||||||||||||||
| CigmpCounterPortRxQuerySpecific | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted IGMP RX specific query | |||||||||||||||||||||
| CigmpCounterPortRxQueryDrop | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current IGMP RX Drop query Condition: Query from UNI port DTag Query IGMP Disabled | |||||||||||||||||||||
| CigmpCounterPortRxReportTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Total accepted IGMP RX report+leave | |||||||||||||||||||||
| CigmpCounterPortRxReportV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted IGMP RX V1 report | |||||||||||||||||||||
| CigmpCounterPortRxReportV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted IGMP RX V2 report | |||||||||||||||||||||
| CigmpCounterPortRxReportV3 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted IGMP RX V3 report | |||||||||||||||||||||
| CigmpCounterPortRxReportV2Leave | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted IGMP RX V2 leave | |||||||||||||||||||||
| CigmpCounterPortRxReportDropByRate | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.12 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current IGMP RX report reached max message | |||||||||||||||||||||
| CigmpCounterPortRxReportDrop | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.13 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Drop IGMP Rx report Condition: DTag report Report from NNI V3 report under V2 mode | |||||||||||||||||||||
| CigmpCounterPortRxReportUnknown | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.14 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Drop IGMP RX report. Not match configured version | |||||||||||||||||||||
| CigmpCounterPortTxQueryTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.15 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Total transmitted IGMP query | |||||||||||||||||||||
| CigmpCounterPortTxQueryV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.16 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted IGMP V1 query | |||||||||||||||||||||
| CigmpCounterPortTxQueryV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.17 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted IGMP V2 query | |||||||||||||||||||||
| CigmpCounterPortTxQueryV3 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.18 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted IGMP V3 query | |||||||||||||||||||||
| CigmpCounterPortTxQuerySpecific | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.19 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted IGMP specific query | |||||||||||||||||||||
| CigmpCounterPortTxReportTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.20 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Total transmitted IGMP report | |||||||||||||||||||||
| CigmpCounterPortTxReportV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.21 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted IGMP V1 report | |||||||||||||||||||||
| CigmpCounterPortTxReportV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.22 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted IGMP V2 report | |||||||||||||||||||||
| CigmpCounterPortTxReportV3 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.23 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted IGMP V3 report | |||||||||||||||||||||
| CigmpCounterPortTxReportV2Leave | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.24 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted IGMP V2 Leave | |||||||||||||||||||||
| CigmpCounterPortJoinedGroup | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.25 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V3 record or V2 report) Number of current IGMP joined group | |||||||||||||||||||||
| CigmpCounterPortJoin | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.26 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V3 record or V2 report) Condition: V2: accepted IGMP report V3: join group record | |||||||||||||||||||||
| CigmpCounterPortLeave | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.27 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V3 record or V2 report) Condition: V2: accepted IGMP leave V3: leave group record | |||||||||||||||||||||
| CigmpCounterPortDropByMaxGroup | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.28 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V3 record or V2 report) Reached max group | |||||||||||||||||||||
| CigmpCounterPortDropByPrivilege | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.29 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V3 record or V2 report) forbid privilege | |||||||||||||||||||||
| CigmpCounterPortDropByMvlan | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.30 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V3 record or V2 report) Condition: Port doesnot join mvlan Group doesnot match mvlan range | |||||||||||||||||||||
| CigmpCounterPortDropByOthers | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.31 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V3 record or V2 report) Condition: Reached max bandwidth Disable privilege profile No privilege profile Preview forbid Preview max count Preview max group(16 per port) Match static multicast IP Mode disabled Invalid group IP | |||||||||||||||||||||
| CmldCounterPortRxQueryTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.32 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Total accepted MLD RX query | |||||||||||||||||||||
| CmldCounterPortRxQueryV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.33 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted MLD RX V1 query | |||||||||||||||||||||
| CmldCounterPortRxQueryV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.34 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted MLD RX V2 query | |||||||||||||||||||||
| CmldCounterPortRxQuerySpecific | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.35 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted MLD RX specific query | |||||||||||||||||||||
| CmldCounterPortRxQueryDrop | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.36 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current MLD RX Drop query Condition: Query from UNI port DTag Query IGMP Disabled | |||||||||||||||||||||
| CmldCounterPortRxReportTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.37 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Total accepted MLD RX report+leave | |||||||||||||||||||||
| CmldCounterPortRxReportV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.38 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted MLD RX V1 report | |||||||||||||||||||||
| CmldCounterPortRxReportV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.39 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted MLD RX V2 report | |||||||||||||||||||||
| CmldCounterPortRxReportV1Leave | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.40 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted MLD RX V1 leave | |||||||||||||||||||||
| CmldCounterPortRxReportDropByRate | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.41 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current MLD RX report reached max message | |||||||||||||||||||||
| CmldCounterPortRxReportDrop | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.42 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Drop MLD Rx report Condition: DTag report Report from NNI V2 report under V1 mode | |||||||||||||||||||||
| CmldCounterPortRxReportUnknown | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.43 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Drop MLD RX report. Not match configured version | |||||||||||||||||||||
| CmldCounterPortTxQueryTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.44 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Total transmitted MLD query | |||||||||||||||||||||
| CmldCounterPortTxQueryV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.45 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted MLD V1 query | |||||||||||||||||||||
| CmldCounterPortTxQueryV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.46 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted MLD V2 query | |||||||||||||||||||||
| CmldCounterPortTxQuerySpecific | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.47 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted MLD specific query | |||||||||||||||||||||
| CmldCounterPortTxReportTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.48 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Total transmitted MLD report | |||||||||||||||||||||
| CmldCounterPortTxReportV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.49 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted MLD V1 report | |||||||||||||||||||||
| CmldCounterPortTxReportV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.50 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted MLD V2 report | |||||||||||||||||||||
| CmldCounterPortTxReportV1Leave | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.51 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted MLD V1 Leave | |||||||||||||||||||||
| CmldCounterPortJoinedGroup | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.52 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V2 record or V1 report) Number of current MLD joined group | |||||||||||||||||||||
| CmldCounterPortJoin | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.53 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V2 record or V1 report) Condition: V1: accepted MLD report V2: join group record | |||||||||||||||||||||
| CmldCounterPortLeave | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.54 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V2 record or V1 report) Condition: V1: accepted MLD leave V2: leave group record | |||||||||||||||||||||
| CmldCounterPortDropByMaxGroup | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.55 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V2 record or V1 report) Reached max group | |||||||||||||||||||||
| CmldCounterPortDropByPrivilege | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.56 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V2 record or V1 report) forbid privilege | |||||||||||||||||||||
| CmldCounterPortDropByMvlan | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.57 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V2 record or V1 report) Condition: Port doesnot join mvlan Group doesnot match mvlan range | |||||||||||||||||||||
| CmldCounterPortDropByOthers | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.58 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V2 record or V1 report) Condition: Reached max bandwidth Disable privilege profile No privilege profile Preview forbid Preview max count Preview max group(16 per port) Match static multicast IP Mode disabled Invalid group IP | |||||||||||||||||||||
| TmgmdStatisticsVlanTable | 1.3.6.1.4.1.890.1.5.13.13.6.13.7 | NA | |||||||||||||||||||
table · not-accessible · current This table includes IGMP/MLD VLAN statistics information | |||||||||||||||||||||
| RmgmdStatisticsVlanEntry | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1 | NA | |||||||||||||||||||
| CmgmdCounterVlanId | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.1 | VlanIndex (1..4094) | RO | ||||||||||||||||||
column · VlanIndex (1..4094) · read-only · current VLAN id | |||||||||||||||||||||
| CigmpCounterVlanRxQueryTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Total accepted IGMP RX query | |||||||||||||||||||||
| CigmpCounterVlanRxQueryV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted IGMP RX V1 query | |||||||||||||||||||||
| CigmpCounterVlanRxQueryV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted IGMP RX V2 query | |||||||||||||||||||||
| CigmpCounterVlanRxQueryV3 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted IGMP RX V3 query | |||||||||||||||||||||
| CigmpCounterVlanRxQuerySpecific | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted IGMP RX specific query | |||||||||||||||||||||
| CigmpCounterVlanRxQueryDrop | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current IGMP RX Drop query Condition: Query from UNI port DTag Query IGMP Disabled | |||||||||||||||||||||
| CigmpCounterVlanRxReportTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Total accepted IGMP RX report+leave | |||||||||||||||||||||
| CigmpCounterVlanRxReportV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted IGMP RX V1 report | |||||||||||||||||||||
| CigmpCounterVlanRxReportV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted IGMP RX V2 report | |||||||||||||||||||||
| CigmpCounterVlanRxReportV3 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted IGMP RX V3 report | |||||||||||||||||||||
| CigmpCounterVlanRxReportV2Leave | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.12 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted IGMP RX V2 leave | |||||||||||||||||||||
| CigmpCounterVlanRxReportDropByRate | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.13 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current IGMP RX report reached max message | |||||||||||||||||||||
| CigmpCounterVlanRxReportDrop | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.14 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Drop IGMP Rx report Condition: DTag report Report from NNI V3 report under V2 mode | |||||||||||||||||||||
| CigmpCounterVlanRxReportUnknown | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.15 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Drop IGMP RX report. Not match configured version | |||||||||||||||||||||
| CigmpCounterVlanTxQueryTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.16 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Total transmitted IGMP query | |||||||||||||||||||||
| CigmpCounterVlanTxQueryV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.17 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted IGMP V1 query | |||||||||||||||||||||
| CigmpCounterVlanTxQueryV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.18 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted IGMP V2 query | |||||||||||||||||||||
| CigmpCounterVlanTxQueryV3 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.19 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted IGMP V3 query | |||||||||||||||||||||
| CigmpCounterVlanTxQuerySpecific | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.20 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted IGMP specific query | |||||||||||||||||||||
| CigmpCounterVlanTxReportTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.21 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Total transmitted IGMP report | |||||||||||||||||||||
| CigmpCounterVlanTxReportV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.22 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted IGMP V1 report | |||||||||||||||||||||
| CigmpCounterVlanTxReportV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.23 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted IGMP V2 report | |||||||||||||||||||||
| CigmpCounterVlanTxReportV3 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.24 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted IGMP V3 report | |||||||||||||||||||||
| CigmpCounterVlanTxReportV2Leave | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.25 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted IGMP V2 Leave | |||||||||||||||||||||
| CigmpCounterVlanJoinedGroup | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.26 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V3 record or V2 report) Number of current IGMP joined group | |||||||||||||||||||||
| CigmpCounterVlanJoin | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.27 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V3 record or V2 report) Condition: V2: accepted IGMP report V3: join group record | |||||||||||||||||||||
| CigmpCounterVlanLeave | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.28 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V3 record or V2 report) Condition: V2: accepted IGMP leave V3: leave group record | |||||||||||||||||||||
| CigmpCounterVlanDropByMaxGroup | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.29 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V3 record or V2 report) Reached max group | |||||||||||||||||||||
| CigmpCounterVlanDropByPrivilege | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.30 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V3 record or V2 report) forbid privilege | |||||||||||||||||||||
| CigmpCounterVlanDropByMvlan | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.31 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V3 record or V2 report) Condition: Port doesnot join mvlan Group doesnot match mvlan range | |||||||||||||||||||||
| CigmpCounterVlanDropByOthers | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.32 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V3 record or V2 report) Condition: Reached max bandwidth Disable privilege profile No privilege profile Preview forbid Preview max count Preview max group(16 per port) Match static multicast IP Mode disabled Invalid group IP | |||||||||||||||||||||
| CmldCounterVlanRxQueryTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.33 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Total accepted MLD RX query | |||||||||||||||||||||
| CmldCounterVlanRxQueryV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.34 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted MLD RX V1 query | |||||||||||||||||||||
| CmldCounterVlanRxQueryV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.35 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted MLD RX V2 query | |||||||||||||||||||||
| CmldCounterVlanRxQuerySpecific | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.36 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted MLD RX specific query | |||||||||||||||||||||
| CmldCounterVlanRxQueryDrop | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.37 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current MLD RX Drop query Condition: Query from UNI port DTag Query IGMP Disabled | |||||||||||||||||||||
| CmldCounterVlanRxReportTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.38 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Total accepted MLD RX report+leave | |||||||||||||||||||||
| CmldCounterVlanRxReportV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.39 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted MLD RX V1 report | |||||||||||||||||||||
| CmldCounterVlanRxReportV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.40 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted MLD RX V2 report | |||||||||||||||||||||
| CmldCounterVlanRxReportV1Leave | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.41 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Accepted MLD RX V1 leave | |||||||||||||||||||||
| CmldCounterVlanRxReportDropByRate | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.42 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current MLD RX report reached max message | |||||||||||||||||||||
| CmldCounterVlanRxReportDrop | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.43 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Drop MLD Rx report Condition: DTag report Report from NNI V2 report under V1 mode | |||||||||||||||||||||
| CmldCounterVlanRxReportUnknown | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.44 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Drop MLD RX report. Not match configured version | |||||||||||||||||||||
| CmldCounterVlanTxQueryTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.45 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Total transmitted MLD query | |||||||||||||||||||||
| CmldCounterVlanTxQueryV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.46 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted MLD V1 query | |||||||||||||||||||||
| CmldCounterVlanTxQueryV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.47 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted MLD V2 query | |||||||||||||||||||||
| CmldCounterVlanTxQuerySpecific | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.48 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted MLD specific query | |||||||||||||||||||||
| CmldCounterVlanTxReportTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.49 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Total transmitted MLD report | |||||||||||||||||||||
| CmldCounterVlanTxReportV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.50 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted MLD V1 report | |||||||||||||||||||||
| CmldCounterVlanTxReportV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.51 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted MLD V2 report | |||||||||||||||||||||
| CmldCounterVlanTxReportV1Leave | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.52 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transmitted MLD V1 Leave | |||||||||||||||||||||
| CmldCounterVlanJoinedGroup | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.53 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V2 record or V1 report) Number of current MLD joined group | |||||||||||||||||||||
| CmldCounterVlanJoin | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.54 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V2 record or V1 report) Condition: V1: accepted MLD report V2: join group record | |||||||||||||||||||||
| CmldCounterVlanLeave | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.55 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V2 record or V1 report) Condition: V1: accepted MLD leave V2: leave group record | |||||||||||||||||||||
| CmldCounterVlanDropByMaxGroup | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.56 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V2 record or V1 report) Reached max group | |||||||||||||||||||||
| CmldCounterVlanDropByPrivilege | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.57 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V2 record or V1 report) forbid privilege | |||||||||||||||||||||
| CmldCounterVlanDropByMvlan | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.58 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V2 record or V1 report) Condition: Port doesnot join mvlan Group doesnot match mvlan range | |||||||||||||||||||||
| CmldCounterVlanDropByOthers | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.59 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specific counter(count by each V2 record or V1 report) Condition: Reached max bandwidth Disable privilege profile No privilege profile Preview forbid Preview max count Preview max group(16 per port) Match static multicast IP Mode disabled Invalid group IP | |||||||||||||||||||||
| TmgmdStatisticsOldVerTable | 1.3.6.1.4.1.890.1.5.13.13.6.13.8 | NA | |||||||||||||||||||
table · not-accessible · current This table includes IGMP/MLD port older version compatible information | |||||||||||||||||||||
| RmgmdStatisticsOldVerEntry | 1.3.6.1.4.1.890.1.5.13.13.6.13.8.1 | NA | |||||||||||||||||||
| CmgmdOlderVerQuerierIGMPv2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.8.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current IGMPv2 report ever received. 1 means had received. | |||||||||||||||||||||
| CmgmdOlderVerQuerierMLDv1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.8.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current MLDv1 report ever received. 1 means had received | |||||||||||||||||||||
| CmgmdOlderVerHostIGMPv2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.8.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current IGMPv2 Query ever received. 1 means had received | |||||||||||||||||||||
| CmgmdOlderVerHostMLDv1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.8.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current MLDv1 Query ever received. 1 means had received | |||||||||||||||||||||
| NigmpmldLogs | 1.3.6.1.4.1.890.1.5.13.13.6.14 | ||||||||||||||||||||
| TigmpmldLogsPortTable | 1.3.6.1.4.1.890.1.5.13.13.6.14.1 | NA | |||||||||||||||||||
table · not-accessible · current This table includes IGMP/MLD port statistics information | |||||||||||||||||||||
| RigmpmldLogsPortEntry | 1.3.6.1.4.1.890.1.5.13.13.6.14.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in igmpmldStatisticsPortTable | |||||||||||||||||||||
| CigmpmldLogsPortTime | 1.3.6.1.4.1.890.1.5.13.13.6.14.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The time of a log entry | |||||||||||||||||||||
| CigmpmldLogsPortSerialNo | 1.3.6.1.4.1.890.1.5.13.13.6.14.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The serial number is used to identify the order of logs in the same seconds | |||||||||||||||||||||
| CigmpmldLogsPortEvent | 1.3.6.1.4.1.890.1.5.13.13.6.14.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The event type of a log entry: join(0) - event of user join a multicast group leave(1) - event of user leave a multicast group drop(2) - event of system drop a multicast goup
| |||||||||||||||||||||
| CigmpmldLogsPortGroupAddressType | 1.3.6.1.4.1.890.1.5.13.13.6.14.1.1.4 | InetAddressType | RO | ||||||||||||||||||
column · InetAddressType · read-only · current The type of address format used for the igmpmldLogsPortGroupAddress
| |||||||||||||||||||||
| CigmpmldLogsPortGroupAddress | 1.3.6.1.4.1.890.1.5.13.13.6.14.1.1.5 | InetAddress | RO | ||||||||||||||||||
column · InetAddress · read-only · current The group address of a log entry | |||||||||||||||||||||
| NigmpmldOps | 1.3.6.1.4.1.890.1.5.13.13.6.15 | ||||||||||||||||||||
| SigmpmldTarget | 1.3.6.1.4.1.890.1.5.13.13.6.15.1 | PortList | RW | ||||||||||||||||||
scalar · PortList · read-write · current Specifies the target NNI/UNI ifindex or vid for igmpmldmldOperation | |||||||||||||||||||||
| SigmpmldOperation | 1.3.6.1.4.1.890.1.5.13.13.6.15.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Clear packet statistics clearIGMPMLDPacketStatistics(1) - clear system-wized packet counters clearIGMPMLDPacketStatisticsOnSpecifiedUNIports(2) - clear packet counter on specified UNI ifindex clearIGMPMLDPacketStatisticsOnSpecifiedNNIports(4) - clear packet counter on specified NNI ifindex clearIGMPMLDPacketStatisticsOnSpecifiedVlan(5) - clear packet counter on specified VLAN
| |||||||||||||||||||||
| SigmpmldPbit | 1.3.6.1.4.1.890.1.5.13.13.6.16 | INTEGER (0..7) | RW | ||||||||||||||||||
scalar · INTEGER (0..7) · read-write · current Configure the priority for non-mvlan group proxy report/leave/query, snooping report/leave/LMQ. <pbit>: 0~8. default 8. 8 stands for using incoming vlan, but auto-genetated query/report uses priority 7. | |||||||||||||||||||||
| SigmpmldMvlanMode | 1.3.6.1.4.1.890.1.5.13.13.6.17 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current IGMP or MLD packet mvlan handling mode. disable(0) - disable IGMP or MLD function snooping(2) - packets are handled IGMP or MLD snopping function proxy(3) - packets are handled IGMP or MLD proxy function proxyReport(4) - packets are handled IGMP or MLD proxy Report function
| |||||||||||||||||||||
| TigmpmldGenniPortTable | 1.3.6.1.4.1.890.1.5.13.13.6.18 | NA | |||||||||||||||||||
table · not-accessible · current igmp/mld Genni Configure the NNI port query behavior. | |||||||||||||||||||||
| RigmpmldGenniPortEntry | 1.3.6.1.4.1.890.1.5.13.13.6.18.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CigmpmldGenniPortStaticQuerier | 1.3.6.1.4.1.890.1.5.13.13.6.18.1.1 | INTEGER (0..3) | RW | ||||||||||||||||||
column · INTEGER (0..3) · read-write · current 0 - auto :become a query channel after received query. 1 - static : always a query channel; 2 - edge : drop query | |||||||||||||||||||||
| Nip | 1.3.6.1.4.1.890.1.5.13.13.7 | ||||||||||||||||||||
| NipArp | 1.3.6.1.4.1.890.1.5.13.13.7.1 | ||||||||||||||||||||
| SipArpOps | 1.3.6.1.4.1.890.1.5.13.13.7.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Flush ARP table.
| |||||||||||||||||||||
| TipArpTable | 1.3.6.1.4.1.890.1.5.13.13.7.1.2 | NA | |||||||||||||||||||
table · not-accessible · current Display the arp table. | |||||||||||||||||||||
| RipArpEntry | 1.3.6.1.4.1.890.1.5.13.13.7.1.2.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CipAddress | 1.3.6.1.4.1.890.1.5.13.13.7.1.2.1.1 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current The IP that is learned in ARP table. | |||||||||||||||||||||
| CmacAddress | 1.3.6.1.4.1.890.1.5.13.13.7.1.2.1.2 | PhysAddress | RO | ||||||||||||||||||
column · PhysAddress · read-only · current The correspond mac address of the ipAddress. | |||||||||||||||||||||
| CipInterface | 1.3.6.1.4.1.890.1.5.13.13.7.1.2.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The interface that the ipAddress is learned. | |||||||||||||||||||||
| NipInband | 1.3.6.1.4.1.890.1.5.13.13.7.2 | ||||||||||||||||||||
| SipInbandAddress | 1.3.6.1.4.1.890.1.5.13.13.7.2.1 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current Sets the in-band management interface IP address (0.0.0.1 ~ 223.255.255.255). | |||||||||||||||||||||
| SipInbandNetmask | 1.3.6.1.4.1.890.1.5.13.13.7.2.2 | INTEGER (1..30) | RW | ||||||||||||||||||
scalar · INTEGER (1..30) · read-write · current Sets the in-band management interface subnet mask. | |||||||||||||||||||||
| SipInbandMgmtVlan | 1.3.6.1.4.1.890.1.5.13.13.7.2.3 | VlanIndex (1..4094) | RW | ||||||||||||||||||
scalar · VlanIndex (1..4094) · read-write · current Sets in-band mangement VLAN (1~4094). | |||||||||||||||||||||
| SipInbandGateway | 1.3.6.1.4.1.890.1.5.13.13.7.2.4 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current Sets the in-band default gateway's IP address (0.0.0.1 ~ 223.255.255.255). | |||||||||||||||||||||
| Tipv6InbandTable | 1.3.6.1.4.1.890.1.5.13.13.7.2.5 | NA | |||||||||||||||||||
table · not-accessible · current The table contains ipv6 inband status. | |||||||||||||||||||||
| Ripv6InbandEntry | 1.3.6.1.4.1.890.1.5.13.13.7.2.5.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| Cipv6InbandIndex | 1.3.6.1.4.1.890.1.5.13.13.7.2.5.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The ip inband index. | |||||||||||||||||||||
| Cipv6InbandAddress | 1.3.6.1.4.1.890.1.5.13.13.7.2.5.1.2 | InetAddress | RW | ||||||||||||||||||
column · InetAddress · read-write · current Configures in-band management interface with global IPv6 address (2000:: ~ 3fff:ffff:ffff:ffff:ffff:ffff:ffff:ffff) or IPv6 address with all zeros (::). | |||||||||||||||||||||
| Cipv6InbandNetmask | 1.3.6.1.4.1.890.1.5.13.13.7.2.5.1.3 | INTEGER (0..127) | RW | ||||||||||||||||||
column · INTEGER (0..127) · read-write · current Configures in-band management interface IPv6 global address subnet mask. | |||||||||||||||||||||
| Sipv6InbandGateway | 1.3.6.1.4.1.890.1.5.13.13.7.2.7 | InetAddress | RW | ||||||||||||||||||
scalar · InetAddress · read-write · current Configures global IPv6 address (2000:: ~ 3fff:ffff:ffff:ffff:ffff:ffff:ffff:ffff) or IPv6 address with all zeros (::) for the inband IPv6 default outgoing gateway. | |||||||||||||||||||||
| SipInbandMgmtPbit | 1.3.6.1.4.1.890.1.5.13.13.7.2.10 | INTEGER (0..7) | RW | ||||||||||||||||||
scalar · INTEGER (0..7) · read-write · current Sets in-band mangement pbit. | |||||||||||||||||||||
| Sipv6InbandLinkLocalAddress | 1.3.6.1.4.1.890.1.5.13.13.7.2.11 | InetAddress | RO | ||||||||||||||||||
scalar · InetAddress · read-only · current In-of-band IPv6 Link-local Address | |||||||||||||||||||||
| SipInbandDhcpClientConfig | 1.3.6.1.4.1.890.1.5.13.13.7.2.15 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable DHCP client to MGMT inband interface. disable(0) is only for status display.
| |||||||||||||||||||||
| SipInbandDhcpClientOption | 1.3.6.1.4.1.890.1.5.13.13.7.2.16 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Renew or release DHCP client to MGMT inband interface.
| |||||||||||||||||||||
| Sipv6InbandDhcpClientConfig | 1.3.6.1.4.1.890.1.5.13.13.7.2.17 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable DHCP client to MGMT inband v6 interface. disable(0) is only for status display.
| |||||||||||||||||||||
| Sipv6InbandDhcpClientOption | 1.3.6.1.4.1.890.1.5.13.13.7.2.18 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Renew or release DHCP client to MGMT inband v6 interface.
| |||||||||||||||||||||
| SipInbandDynamicAddress | 1.3.6.1.4.1.890.1.5.13.13.7.2.19 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current Gets the in-band management interface IP address (0.0.0.1 ~ 223.255.255.255). | |||||||||||||||||||||
| SipInbandDynamicGateway | 1.3.6.1.4.1.890.1.5.13.13.7.2.20 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current Gets the in-band dynamic gateway's IP address (0.0.0.1 ~ 223.255.255.255). | |||||||||||||||||||||
| NipOutband | 1.3.6.1.4.1.890.1.5.13.13.7.3 | ||||||||||||||||||||
| SipOutbandAddress | 1.3.6.1.4.1.890.1.5.13.13.7.3.1 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current Sets the out-of-band management interface IP address (0.0.0.1 ~ 223.255.255.255). | |||||||||||||||||||||
| SipOutbandNetmask | 1.3.6.1.4.1.890.1.5.13.13.7.3.2 | INTEGER (1..30) | RW | ||||||||||||||||||
scalar · INTEGER (1..30) · read-write · current Sets the out-of-band management interface subnet mask. | |||||||||||||||||||||
| Tipv6OutbandTable | 1.3.6.1.4.1.890.1.5.13.13.7.3.3 | NA | |||||||||||||||||||
table · not-accessible · current The table contains ipv6 outband status. | |||||||||||||||||||||
| Ripv6OutbandEntry | 1.3.6.1.4.1.890.1.5.13.13.7.3.3.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| Cipv6OutbandIndex | 1.3.6.1.4.1.890.1.5.13.13.7.3.3.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The ipv6 outband index. | |||||||||||||||||||||
| Cipv6OutbandAddress | 1.3.6.1.4.1.890.1.5.13.13.7.3.3.1.2 | InetAddress | RW | ||||||||||||||||||
column · InetAddress · read-write · current Configures out-of-band management interface with IPv6 global address (2000:: ~ 3fff:ffff:ffff:ffff:ffff:ffff:ffff:ffff) or IPv6 address with all zeros (::). | |||||||||||||||||||||
| Cipv6OutbandNetmask | 1.3.6.1.4.1.890.1.5.13.13.7.3.3.1.3 | INTEGER (0..127) | RW | ||||||||||||||||||
column · INTEGER (0..127) · read-write · current Configures out-of-band management interface IPv6 global address subnet mask. | |||||||||||||||||||||
| SipoutbandGateway | 1.3.6.1.4.1.890.1.5.13.13.7.3.5 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current Sets the out-band default gateway's IP address (0.0.0.1 ~ 223.255.255.255). | |||||||||||||||||||||
| SipoutbandDhcpClientConfig | 1.3.6.1.4.1.890.1.5.13.13.7.3.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable DHCP client to MGMT outband interface. disable(0) is only for status display.
| |||||||||||||||||||||
| SipoutbandDhcpClientOption | 1.3.6.1.4.1.890.1.5.13.13.7.3.7 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Renew or release DHCP client to MGMT outband interface.
| |||||||||||||||||||||
| Sipv6outbandDhcpClientConfig | 1.3.6.1.4.1.890.1.5.13.13.7.3.8 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable DHCP client to MGMT outband v6 interface. disable(0) is only for status display.
| |||||||||||||||||||||
| Sipv6outbandDhcpClientOption | 1.3.6.1.4.1.890.1.5.13.13.7.3.9 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Renew or release DHCP client to MGMT outband v6 interface.
| |||||||||||||||||||||
| Sipv6OutbandLinkLocalAddress | 1.3.6.1.4.1.890.1.5.13.13.7.3.10 | InetAddress | RO | ||||||||||||||||||
scalar · InetAddress · read-only · current Out-of-band IPv6 Link-local Address | |||||||||||||||||||||
| SipOutbandDynamicAddress | 1.3.6.1.4.1.890.1.5.13.13.7.3.11 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current Gets the out-of-band management interface IP address (0.0.0.1 ~ 223.255.255.255). | |||||||||||||||||||||
| SipoutbandDynamicGateway | 1.3.6.1.4.1.890.1.5.13.13.7.3.12 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current Gets the out-band dynamic gateway's IP address (0.0.0.1 ~ 223.255.255.255). | |||||||||||||||||||||
| Sipv6DefaultMgmt | 1.3.6.1.4.1.890.1.5.13.13.7.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Sets which traffic flow (in-band or out-of-band) the Switch sends packet originating from itself (such as SNMP traps) or packets with unknown source.
| |||||||||||||||||||||
| NipRoute | 1.3.6.1.4.1.890.1.5.13.13.7.5 | ||||||||||||||||||||
| SipMaxNumOfStaticRoutes | 1.3.6.1.4.1.890.1.5.13.13.7.5.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The maximum number of static routes supported by the system. | |||||||||||||||||||||
| TipStaticRouteTable | 1.3.6.1.4.1.890.1.5.13.13.7.5.2 | NA | |||||||||||||||||||
table · not-accessible · current Configures a static route. | |||||||||||||||||||||
| RipStaticRouteEntry | 1.3.6.1.4.1.890.1.5.13.13.7.5.2.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CipStaticRouteDest | 1.3.6.1.4.1.890.1.5.13.13.7.5.2.1.1 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current Destination subnet address 0.0.0.0 ~ 223.255.255.255 | |||||||||||||||||||||
| CipStaticRouteMask | 1.3.6.1.4.1.890.1.5.13.13.7.5.2.1.2 | INTEGER (1..32) | RO | ||||||||||||||||||
column · INTEGER (1..32) · read-only · current Destination subnet mask | |||||||||||||||||||||
| CipStaticRouteNextHop | 1.3.6.1.4.1.890.1.5.13.13.7.5.2.1.3 | IpAddress | RC | ||||||||||||||||||
column · IpAddress · read-create · current Next hop address 0.0.0.0 ~ 223.255.255.255 | |||||||||||||||||||||
| CipStaticRouteRowStatus | 1.3.6.1.4.1.890.1.5.13.13.7.5.2.1.4 | RowStatus | RC | ||||||||||||||||||
| CipStaticRouteIfName | 1.3.6.1.4.1.890.1.5.13.13.7.5.2.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Destination interface name | |||||||||||||||||||||
| CipStaticRouteMetric | 1.3.6.1.4.1.890.1.5.13.13.7.5.2.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Destination interface metric | |||||||||||||||||||||
| TipRouteTable | 1.3.6.1.4.1.890.1.5.13.13.7.5.3 | NA | |||||||||||||||||||
table · not-accessible · current Display routing table. | |||||||||||||||||||||
| RipRouteEntry | 1.3.6.1.4.1.890.1.5.13.13.7.5.3.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CipRouteDest | 1.3.6.1.4.1.890.1.5.13.13.7.5.3.1.1 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current Destination subnet address 0.0.0.0 ~ 223.255.255.255 | |||||||||||||||||||||
| CipRouteMask | 1.3.6.1.4.1.890.1.5.13.13.7.5.3.1.2 | INTEGER (1..32) | RO | ||||||||||||||||||
column · INTEGER (1..32) · read-only · current Destination subnet mask | |||||||||||||||||||||
| CipRouteNextHop | 1.3.6.1.4.1.890.1.5.13.13.7.5.3.1.3 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current Next hop address 0.0.0.0 ~ 223.255.255.255 | |||||||||||||||||||||
| CipRouteIfName | 1.3.6.1.4.1.890.1.5.13.13.7.5.3.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Destination interface name | |||||||||||||||||||||
| CipRouteMetric | 1.3.6.1.4.1.890.1.5.13.13.7.5.3.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Destination interface metric | |||||||||||||||||||||
| Tipv6DefaultRouterInbandTable | 1.3.6.1.4.1.890.1.5.13.13.7.5.4 | NA | |||||||||||||||||||
table · not-accessible · current Show IPv6 inband default-router. | |||||||||||||||||||||
| Ripv6DefaultRouterInbandEntry | 1.3.6.1.4.1.890.1.5.13.13.7.5.4.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| Cipv6DefaultRouterInbandAddress | 1.3.6.1.4.1.890.1.5.13.13.7.5.4.1.1 | InetAddress | RO | ||||||||||||||||||
column · InetAddress · read-only · current Show IPv6 default-router inband Address. | |||||||||||||||||||||
| Cipv6DefaultRouterInbandPreference | 1.3.6.1.4.1.890.1.5.13.13.7.5.4.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Show IPv6 default-router inband Preference | |||||||||||||||||||||
| Cipv6DefaultRouterInbandLifetime | 1.3.6.1.4.1.890.1.5.13.13.7.5.4.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Show IPv6 default-router inband lifetime (Unit: sec) | |||||||||||||||||||||
| Cipv6DefaultRouterInbandExpire | 1.3.6.1.4.1.890.1.5.13.13.7.5.4.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Show IPv6 default-router inband expire | |||||||||||||||||||||
| Cipv6DefaultRouterInbandFlag | 1.3.6.1.4.1.890.1.5.13.13.7.5.4.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Show IPv6 default-router inband flag | |||||||||||||||||||||
| Tipv6DefaultRouterOutbandTable | 1.3.6.1.4.1.890.1.5.13.13.7.5.5 | NA | |||||||||||||||||||
table · not-accessible · current Show IPv6 outband default-router. | |||||||||||||||||||||
| Ripv6DefaultRouterOutbandEntry | 1.3.6.1.4.1.890.1.5.13.13.7.5.5.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| Cipv6DefaultRouterOutbandAddress | 1.3.6.1.4.1.890.1.5.13.13.7.5.5.1.1 | InetAddress | RO | ||||||||||||||||||
column · InetAddress · read-only · current Show IPv6 default-router outband Address. | |||||||||||||||||||||
| Cipv6DefaultRouterOutbandPreference | 1.3.6.1.4.1.890.1.5.13.13.7.5.5.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Show IPv6 default-router outband Preference | |||||||||||||||||||||
| Cipv6DefaultRouterOutbandLifetime | 1.3.6.1.4.1.890.1.5.13.13.7.5.5.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Show IPv6 default-router outband lifetime. (Unit: sec) | |||||||||||||||||||||
| Cipv6DefaultRouterOutbandExpire | 1.3.6.1.4.1.890.1.5.13.13.7.5.5.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Show IPv6 default-router outband expire | |||||||||||||||||||||
| Cipv6DefaultRouterOutbandFlag | 1.3.6.1.4.1.890.1.5.13.13.7.5.5.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Show IPv6 default-router outband flag | |||||||||||||||||||||
| Tipv6RouteInbandTable | 1.3.6.1.4.1.890.1.5.13.13.7.5.6 | NA | |||||||||||||||||||
table · not-accessible · current Show IPv6 inband route | |||||||||||||||||||||
| Ripv6RouteInbandEntry | 1.3.6.1.4.1.890.1.5.13.13.7.5.6.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| Cipv6RouteInbandAddress | 1.3.6.1.4.1.890.1.5.13.13.7.5.6.1.1 | InetAddress | RO | ||||||||||||||||||
column · InetAddress · read-only · current Show IPv6 inband route Address. | |||||||||||||||||||||
| Cipv6RouteInbandMask | 1.3.6.1.4.1.890.1.5.13.13.7.5.6.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Show IPv6 inband route address mask. | |||||||||||||||||||||
| Cipv6RouteInbandName | 1.3.6.1.4.1.890.1.5.13.13.7.5.6.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Show IPv6 inband route Gateway/Interface Name | |||||||||||||||||||||
| Tipv6RouteOutbandTable | 1.3.6.1.4.1.890.1.5.13.13.7.5.7 | NA | |||||||||||||||||||
table · not-accessible · current Show IPv6 outband route | |||||||||||||||||||||
| Ripv6RouteOutbandEntry | 1.3.6.1.4.1.890.1.5.13.13.7.5.7.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| Cipv6RouteOutbandAddress | 1.3.6.1.4.1.890.1.5.13.13.7.5.7.1.1 | InetAddress | RO | ||||||||||||||||||
column · InetAddress · read-only · current Show IPv6 outband route Address. | |||||||||||||||||||||
| Cipv6RouteOutbandMask | 1.3.6.1.4.1.890.1.5.13.13.7.5.7.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Show IPv6 inband route address mask. | |||||||||||||||||||||
| Cipv6RouteOutbandName | 1.3.6.1.4.1.890.1.5.13.13.7.5.7.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Show IPv6 Outband route Gateway/Interface Name | |||||||||||||||||||||
| NipStatistic | 1.3.6.1.4.1.890.1.5.13.13.7.6 | ||||||||||||||||||||
| SipInbandInOctetCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.1 | INTEGER | RO | ||||||||||||||||||
| SipInbandInUnicastCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.2 | INTEGER | RO | ||||||||||||||||||
| SipInbandInMulticastCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.3 | INTEGER | RO | ||||||||||||||||||
| SipInbandInDiscardCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.4 | INTEGER | RO | ||||||||||||||||||
| SipInbandInErrorCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.5 | INTEGER | RO | ||||||||||||||||||
| SipInbandOutOctetCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.7 | INTEGER | RO | ||||||||||||||||||
| SipInbandOutUnicastCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.8 | INTEGER | RO | ||||||||||||||||||
| SipInbandOutDiscardCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.10 | INTEGER | RO | ||||||||||||||||||
| SipInbandOutErrorCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.11 | INTEGER | RO | ||||||||||||||||||
| SipOutbandInOctetCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.12 | INTEGER | RO | ||||||||||||||||||
| SipOutbandInUnicastCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.13 | INTEGER | RO | ||||||||||||||||||
| SipOutbandInMulticastCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.14 | INTEGER | RO | ||||||||||||||||||
| SipOutbandInDiscardCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.15 | INTEGER | RO | ||||||||||||||||||
| SipOutbandInErrorCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.16 | INTEGER | RO | ||||||||||||||||||
| SipOutbandOutOctetCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.17 | INTEGER | RO | ||||||||||||||||||
| SipOutbandOutUnicastCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.18 | INTEGER | RO | ||||||||||||||||||
| SipOutbandOutDiscardCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.19 | INTEGER | RO | ||||||||||||||||||
| SipOutbandOutErrorCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.20 | INTEGER | RO | ||||||||||||||||||
| Nipv6Prefix | 1.3.6.1.4.1.890.1.5.13.13.7.9 | ||||||||||||||||||||
| Tipv6PrefixInbandTable | 1.3.6.1.4.1.890.1.5.13.13.7.9.1 | NA | |||||||||||||||||||
table · not-accessible · current Show IPv6 inband prefix | |||||||||||||||||||||
| Ripv6PrefixInbandEntry | 1.3.6.1.4.1.890.1.5.13.13.7.9.1.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| Cipv6PrefixInbandPrefix | 1.3.6.1.4.1.890.1.5.13.13.7.9.1.1.1 | InetAddress | RO | ||||||||||||||||||
column · InetAddress · read-only · current Show IPv6 inband prefix address. | |||||||||||||||||||||
| Cipv6PrefixInbandPrefixLength | 1.3.6.1.4.1.890.1.5.13.13.7.9.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Show IPv6 inband prefix length. | |||||||||||||||||||||
| Tipv6PrefixOutbandTable | 1.3.6.1.4.1.890.1.5.13.13.7.9.2 | NA | |||||||||||||||||||
table · not-accessible · current Show IPv6 outband prefix | |||||||||||||||||||||
| Ripv6PrefixOutbandEntry | 1.3.6.1.4.1.890.1.5.13.13.7.9.2.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| Cipv6PrefixOutbandPrefix | 1.3.6.1.4.1.890.1.5.13.13.7.9.2.1.1 | InetAddress | RO | ||||||||||||||||||
column · InetAddress · read-only · current Show IPv6 outband prefix address. | |||||||||||||||||||||
| Cipv6PrefixOutbandPrefixLength | 1.3.6.1.4.1.890.1.5.13.13.7.9.2.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Show IPv6 outband prefix length. | |||||||||||||||||||||
| SipDefaultGateway | 1.3.6.1.4.1.890.1.5.13.13.7.10 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Set the inband or outband gateway as the default gateway
| |||||||||||||||||||||
| NipL3Routing | 1.3.6.1.4.1.890.1.5.13.13.7.21 | ||||||||||||||||||||
| NroutingIfaceSetup | 1.3.6.1.4.1.890.1.5.13.13.7.21.1 | ||||||||||||||||||||
| SmaxNumOfRouterIp | 1.3.6.1.4.1.890.1.5.13.13.7.21.1.5 | INTEGER | RO | ||||||||||||||||||
| TrouterIpTable | 1.3.6.1.4.1.890.1.5.13.13.7.21.1.6 | NA | |||||||||||||||||||
| RrouterIpEntry | 1.3.6.1.4.1.890.1.5.13.13.7.21.1.6.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in inbandIpTable. | |||||||||||||||||||||
| CrouterIpEntryVid | 1.3.6.1.4.1.890.1.5.13.13.7.21.1.6.1.1 | INTEGER | RO | ||||||||||||||||||
| CrouterIpEntryIp | 1.3.6.1.4.1.890.1.5.13.13.7.21.1.6.1.2 | IpAddress | RO | ||||||||||||||||||
| CrouterIpEntrySubnetMask | 1.3.6.1.4.1.890.1.5.13.13.7.21.1.6.1.3 | IpAddress | RO | ||||||||||||||||||
| CrouterIpEntryRowStatus | 1.3.6.1.4.1.890.1.5.13.13.7.21.1.6.1.4 | RowStatus | RC | ||||||||||||||||||
| Nlayer3Setup | 1.3.6.1.4.1.890.1.5.13.13.7.21.2 | ||||||||||||||||||||
| SrouterRipDistance | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The administrative distance of RIP routes | |||||||||||||||||||||
| SrouterRipUpdateTimer | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.2 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The update timer of RIP routes | |||||||||||||||||||||
| SrouterRipInvalidTimer | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.3 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The invalid timer of RIP routes | |||||||||||||||||||||
| SrouterRipFlushTimer | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.4 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The flush timer of RIP routes | |||||||||||||||||||||
| TripRoutingTable | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5 | NA | |||||||||||||||||||
| RripRoutingTableEntry | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1 | NA | |||||||||||||||||||
| CripRoutingIndex | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1.1 | INTEGER | RO | ||||||||||||||||||
| CripRoutingDest | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1.2 | IpAddress | RO | ||||||||||||||||||
| CripRoutingMask | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1.3 | INTEGER | RO | ||||||||||||||||||
| CripRoutingGateway | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1.4 | IpAddress | RO | ||||||||||||||||||
| CripRoutingMetric | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1.5 | INTEGER | RO | ||||||||||||||||||
| CripRoutingFrom | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1.6 | IpAddress | RO | ||||||||||||||||||
| CripRoutingTime | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1.7 | DisplayString | RO | ||||||||||||||||||
| CripRoutingType | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1.8 | DisplayString | RO | ||||||||||||||||||
| NospfSettings | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6 | ||||||||||||||||||||
| SospfRouterId | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6.1 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current OSPF router id. Range: 0.0.0.1 ~ 255.255.255.255 Set 0.0.0.0 to remove router id setting | |||||||||||||||||||||
| SospfDistance | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current OSPF distance, range: 1 ~ 255 Default: 15 | |||||||||||||||||||||
| SospfRedistributeStatic | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable redistribute static route, need to be set via multiple variable binding with ospfRedistributeStaticMetricType and ospfRedistributeStaticMetric
| |||||||||||||||||||||
| SospfRedistributeStaticMetricType | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Set redistribute static route metric type Default: 1 1(1): External Type 1, add up the cost toward the destination 2(2): External Type 2, with default metric of 20 and will never change/increment through every hops
| |||||||||||||||||||||
| SospfRedistributeStaticMetric | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6.5 | INTEGER (0..16777214) | RW | ||||||||||||||||||
scalar · INTEGER (0..16777214) · read-write · current Set redistribute static route metric Default: 15 | |||||||||||||||||||||
| SospfRedistributeRip | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable redistribute RIP, need to be set via multiple variable binding with ospfRedistributeRipMetricType and ospfRedistributeRipMetric
| |||||||||||||||||||||
| SospfRedistributeRipMetricType | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6.7 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Set redistribute RIP metric type Default: 1 1(1): External Type 1, add up the cost toward the destination 2(2): External Type 2, with default metric of 20 and will never change/increment through every hops
| |||||||||||||||||||||
| SospfRedistributeRipMetric | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6.8 | INTEGER (0..16777214) | RW | ||||||||||||||||||
scalar · INTEGER (0..16777214) · read-write · current Set redistribute RIP metric Default: 15 | |||||||||||||||||||||
| TospfNetworkTable | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.7 | NA | |||||||||||||||||||
| RospfNetworkTableEntry | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.7.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in ospfNetworkTable. | |||||||||||||||||||||
| CospfNetworkAddress | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.7.1.1 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current OSPF network IP address. Range: 0.0.0.1 ~ 223.255.255.255 | |||||||||||||||||||||
| CospfNetworkMask | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.7.1.2 | INTEGER (1..32) | RO | ||||||||||||||||||
column · INTEGER (1..32) · read-only · current OSPF network mask. Range: 1 ~ 32 | |||||||||||||||||||||
| CospfNetworkAreaId | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.7.1.3 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current OSPF network area ID. Range: 0.0.0.0 ~ 255.255.255.255 | |||||||||||||||||||||
| CospfNetworkRowStatus | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.7.1.4 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of OSPF network. | |||||||||||||||||||||
| TospfAreaTable | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.8 | NA | |||||||||||||||||||
| RospfAreaTableEntry | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.8.1 | NA | |||||||||||||||||||
| CospfAreaEntry | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.8.1.1 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current OSPF area ID. | |||||||||||||||||||||
| CospfAreaEntryType | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.8.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current OSPF area type.
| |||||||||||||||||||||
| CospfAreaEntryDefaultCost | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.8.1.3 | INTEGER (1..16777215) | RW | ||||||||||||||||||
column · INTEGER (1..16777215) · read-write · current OSPF area default cost, can be set only when current area is stub or NSSA area. Default: 15 | |||||||||||||||||||||
| CospfAreaEntryAuthProtocol | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.8.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current OSPF area authentication type.
| |||||||||||||||||||||
| CospfArearEntryRowStatus | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.8.1.5 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of OSPF area | |||||||||||||||||||||
| TospfRoutingTable | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9 | NA | |||||||||||||||||||
| RospfRoutingTableEntry | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1 | NA | |||||||||||||||||||
| CospfRoutingIndex | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Index of OSPF routing table | |||||||||||||||||||||
| CospfRoutingRouteType | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Route type
| |||||||||||||||||||||
| CospfRoutingAreaType | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Routing area type
| |||||||||||||||||||||
| CospfRoutingDest | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.4 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current Prefix/router ID | |||||||||||||||||||||
| CospfRoutingMask | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.5 | INTEGER | RO | ||||||||||||||||||
| CospfRoutingGateway | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.6 | IpAddress | RO | ||||||||||||||||||
| CospfRoutingMetric | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.7 | INTEGER | RO | ||||||||||||||||||
| CospfRoutingVia | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.8 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Routing interface where ospfRoutingDest from | |||||||||||||||||||||
| CospfRoutingRouterType | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.9 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Neighboring router type | |||||||||||||||||||||
| NrouterDomainSetup | 1.3.6.1.4.1.890.1.5.13.13.7.21.3 | ||||||||||||||||||||
| TrouterDomainIpTable | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1 | NA | |||||||||||||||||||
| RrouterDomainIpEntry | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1 | NA | |||||||||||||||||||
| CrouterDomainIpVid | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.1 | INTEGER | RO | ||||||||||||||||||
| CrouterDomainIpRipDirection | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current
| |||||||||||||||||||||
| CrouterDomainIpRipVersion | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current
| |||||||||||||||||||||
| CrouterDomainIpOspfCost | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.4 | INTEGER (1..65535) | RW | ||||||||||||||||||
column · INTEGER (1..65535) · read-write · current OSPF interface cost. Range: 1 ~ 65535 Default: 15 | |||||||||||||||||||||
| CrouterDomainIpOspfPriority | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.5 | INTEGER (0..255) | RW | ||||||||||||||||||
column · INTEGER (0..255) · read-write · current OSPF interface priority. Range: 0 ~ 255 Default: 1 | |||||||||||||||||||||
| CrouterDomainIpOspfRetransmitInterval | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.6 | INTEGER (1..65535) | RW | ||||||||||||||||||
column · INTEGER (1..65535) · read-write · current OSPF interface retransmit interval. Range: 1 ~ 65535 Default: 5 | |||||||||||||||||||||
| CrouterDomainIpOspfTransmitDelay | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.7 | INTEGER (1..65535) | RW | ||||||||||||||||||
column · INTEGER (1..65535) · read-write · current OSPF interface transmit delay. Range: 1 ~ 65535 Default: 1 | |||||||||||||||||||||
| CrouterDomainIpOspfDeadInterval | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.8 | INTEGER (1..65535) | RW | ||||||||||||||||||
column · INTEGER (1..65535) · read-write · current OSPF interface dead interval. Range: 1 ~ 65535 Default: 40 | |||||||||||||||||||||
| CrouterDomainIpOspfHelloInterval | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.9 | INTEGER (1..65535) | RW | ||||||||||||||||||
column · INTEGER (1..65535) · read-write · current OSPF interface hello interval. Range: 1 ~ 65535 Default: 10 | |||||||||||||||||||||
| CrouterDomainIpOspfPassive | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.10 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Set OSPF passive interface
| |||||||||||||||||||||
| CrouterDomainIpOspfAuth | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.11 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current OSPF interface authentication type.
| |||||||||||||||||||||
| CrouterDomainIpOspfAuthSimpleKey | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.12 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current OSPF simple key, 8 printable characters. Simple key can only be set when authentication method is set as 'simple(1)' Set null string to remove simple key setting | |||||||||||||||||||||
| CrouterDomainIpOspfMd5KeyId | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.13 | INTEGER (1..255) | RW | ||||||||||||||||||
column · INTEGER (1..255) · read-write · current OSPF interface message-digest key ID. Range: 1 ~ 255 0 indicates key ID is not set. | |||||||||||||||||||||
| CrouterDomainIpOspfMd5Key | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.14 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current OSPF interface message-digest key, 16 printable characters. MD5 key can only be set when authentication method is set as 'md5(2)', key id and key must can be set only via variable binding option. Set null string to remove message-digest key setting | |||||||||||||||||||||
| Nlcman | 1.3.6.1.4.1.890.1.5.13.13.8 | ||||||||||||||||||||
| TslotModuleTable | 1.3.6.1.4.1.890.1.5.13.13.8.1 | NA | |||||||||||||||||||
table · not-accessible · current The table which contains the slot information in a chassis. | |||||||||||||||||||||
| RslotModuleEntry | 1.3.6.1.4.1.890.1.5.13.13.8.1.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CslotModuleId | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.1 | INTEGER | RO | 1 | |||||||||||||||||
column · INTEGER · read-only · current Identity of the slot. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CslotModuleCardType | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.2 | INTEGER | RO | olc3416-42a(43) | |||||||||||||||||
column · INTEGER · read-only · current Card type of the plug-in card.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CslotModuleDescr | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.4 | DisplayString | RO | OLC3416-42A | |||||||||||||||||
column · DisplayString · read-only · current The descriptions of the plug-in card. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CslotModuleStatus | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.5 | INTEGER | RO | active(3) | |||||||||||||||||
column · INTEGER · read-only · current The module state of the plug-in card.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CslotModuleAlarmStatus | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.6 | INTEGER | RO | noAlarm(2) | |||||||||||||||||
column · INTEGER · read-only · current This variable indicates the alarm status of the module and would be aligned with MSC/line-card alarm LED. hasAlarm(1) there is at least one critical current alarm realted to the module noAlarm(2) there are no critical current alarms related to the module
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CslotModuleHWVersion | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.7 | DisplayString | RO | A0B | |||||||||||||||||
column · DisplayString · read-only · current The hardware version of the plug-in card Example values from LibreNMS test devices
| |||||||||||||||||||||
| CslotModuleSerialNumber | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.8 | DisplayString | RO | S170Z33000103 | |||||||||||||||||
column · DisplayString · read-only · current The serial number of the plug-in card Example values from LibreNMS test devices
| |||||||||||||||||||||
| CslotModuleUpTime | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.10 | INTEGER | RO | 765459 | |||||||||||||||||
column · INTEGER · read-only · current The time (in seconds) since the plug-in card was last re-initialized. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CslotModuleAdminState | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.11 | INTEGER | RW | enable(1) | |||||||||||||||||
column · INTEGER · read-write · current Enable/disable specified slot
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CslotModuleReset | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.12 | INTEGER | RW | noAction(0) | |||||||||||||||||
column · INTEGER · read-write · current Write reset(1) to reset the slot. Always return noAction(0).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CslotModuleReProvision | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.13 | INTEGER | RW | noAction(0) | |||||||||||||||||
column · INTEGER · read-write · current Write 1 to re-provision the slot. Always return noAction(0).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CslotModuleDriverInfo | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.14 | DisplayString | RO | | |||||||||||||||||
column · DisplayString · read-only · current The driver information of the plug-in card, multiple versions are seperated by ',' Example values from LibreNMS test devices
| |||||||||||||||||||||
| CslotModuleImage1FwVersion | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.15 | DisplayString | RO | V1.08(ABCH.0) | 2019-03-28 | |||||||||||||||||
column · DisplayString · read-only · current The image-1 version of the plug-in card Example values from LibreNMS test devices
| |||||||||||||||||||||
| CslotModuleImage2FwVersion | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.16 | DisplayString | RO | V1.08(ABCH.0) | 2019-03-28 | |||||||||||||||||
column · DisplayString · read-only · current The image-2 version of the plug-in card Example values from LibreNMS test devices
| |||||||||||||||||||||
| CslotModuleBootupFwVersion | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.17 | DisplayString | RO | V1.08(ABCH.0) | 2019-03-28 | |||||||||||||||||
column · DisplayString · read-only · current The running firmware version of the plug-in card Example values from LibreNMS test devices
| |||||||||||||||||||||
| CslotModuleBootupImage | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.18 | INTEGER | RW | image1(1) | |||||||||||||||||
column · INTEGER · read-write · current Plug-in card's firmware image index used for system boot up.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CslotModuleFwUpgradeStatus | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.19 | INTEGER | RO | idle(10) | |||||||||||||||||
column · INTEGER · read-only · current Device returns swDownloading(1) - if the downloading process is on going. Device returns swDownloadedSuccessfully(2) - if the downloading process is successfully. Device returns swDownloadedTimeout(3) - if the downloading process is timeout. Device returns swImageFileError(4) - if the downloaded image file has error CRC. Device returns swInstalling(5) - if the downloaded image file is installing (EAN is restarting). Device returns swInstallingError(6) - if EAN failed to installing downloaded image file. Device returns swInstallSuccessfully(7) - if EAN installed downloaded image file successfully. Device returns swRestoreSuccessfully(8) - if EAN restored SW successfully. Device returns swRevertSuccessfully(9) - if EAN reverted to old SW successfully. Device returns idle(10) - if EAN didn't get any SW downloading command after system booted up. Device returns unKnownError(11) - if the installing process is terminated due to NE restart by unknown reason
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CslotModuleMacAddress | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.20 | MacAddress | RO | 5c:f4:ab:93:a1:68 | |||||||||||||||||
column · MacAddress · read-only · current MAC address of plug-in card Example values from LibreNMS test devices
| |||||||||||||||||||||
| CslotModuleRunningImage | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.21 | INTEGER | RO | image-1(1) | |||||||||||||||||
column · INTEGER · read-only · current The running firmware image index
Example values from LibreNMS test devices
| |||||||||||||||||||||
| Nlogin | 1.3.6.1.4.1.890.1.5.13.13.9 | ||||||||||||||||||||
| SloginMaxNumOfUsers | 1.3.6.1.4.1.890.1.5.13.13.9.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The maximum number of login user accounts supported by the system. | |||||||||||||||||||||
| TloginUserTable | 1.3.6.1.4.1.890.1.5.13.13.9.2 | NA | |||||||||||||||||||
table · not-accessible · current Login account configuration table. | |||||||||||||||||||||
| RloginUserEntry | 1.3.6.1.4.1.890.1.5.13.13.9.2.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CloginUserName | 1.3.6.1.4.1.890.1.5.13.13.9.2.1.1 | DisplayString (SIZE (1..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (1..31)) · read-only · current Name of user account. | |||||||||||||||||||||
| CloginUserPassword | 1.3.6.1.4.1.890.1.5.13.13.9.2.1.2 | DisplayString (SIZE (1..128)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (1..128)) · read-write · current Password of user account. | |||||||||||||||||||||
| CloginUserPrivilege | 1.3.6.1.4.1.890.1.5.13.13.9.2.1.3 | INTEGER (0..14) | RW | ||||||||||||||||||
column · INTEGER (0..14) · read-write · current Assigns a privilege level to the specified account. The privilege level is applied the next time the user logs in. | |||||||||||||||||||||
| CloginUserRowStatus | 1.3.6.1.4.1.890.1.5.13.13.9.2.1.4 | RowStatus | RC | ||||||||||||||||||
| Nloopguard | 1.3.6.1.4.1.890.1.5.13.13.10 | ||||||||||||||||||||
| TloopguardConfPortTable | 1.3.6.1.4.1.890.1.5.13.13.10.1 | NA | |||||||||||||||||||
table · not-accessible · current Loop guard configuration table | |||||||||||||||||||||
| RloopguardConfPortEntry | 1.3.6.1.4.1.890.1.5.13.13.10.1.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CloopguardConfPortEnable | 1.3.6.1.4.1.890.1.5.13.13.10.1.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable/Disable loop guard function for specific port.
| |||||||||||||||||||||
| CloopguardConfPortPolicy | 1.3.6.1.4.1.890.1.5.13.13.10.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures the policy when loop condition is detected. fix : shutdown the port, user needs to enable the port manually dynamic : shutdown the port, and recovered after recover time
| |||||||||||||||||||||
| CloopguardConfPortRecoverTime | 1.3.6.1.4.1.890.1.5.13.13.10.1.1.3 | INTEGER (60..600) | RW | ||||||||||||||||||
column · INTEGER (60..600) · read-write · current Configures the recover time for dynamic policy.
| |||||||||||||||||||||
| TloopguardStatsPortTable | 1.3.6.1.4.1.890.1.5.13.13.10.3 | NA | |||||||||||||||||||
table · not-accessible · current Loop guard port statistics table | |||||||||||||||||||||
| RloopguardStatsPortEntry | 1.3.6.1.4.1.890.1.5.13.13.10.3.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CloopguardStatsPortLinkedState | 1.3.6.1.4.1.890.1.5.13.13.10.3.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Displays linked state on specific port.
| |||||||||||||||||||||
| CloopguardStatsPortTxPkts | 1.3.6.1.4.1.890.1.5.13.13.10.3.1.2 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Displays counter of transmited loopguard probe packet on specific port. | |||||||||||||||||||||
| CloopguardStatsPortRxPkts | 1.3.6.1.4.1.890.1.5.13.13.10.3.1.3 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Displays counter of received loopguard probe packet on specific port. | |||||||||||||||||||||
| CloopguardStatsPortBadPkts | 1.3.6.1.4.1.890.1.5.13.13.10.3.1.4 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Displays counter of received bad loopguard probe packet on specific port. The bad loopguard probe packet will not trigger loopguard block port mechanism. loopguardStatsPortRxPkts minus loopguardStatsPortBadPkts represents the number of received loopguard packet which will trigger loopguard block port mechanism. The bad loopguard probe packet includes the loopguard packet with incorrect checksum, the loopguard packet with time-out time stamp, and the loopguard packet with wrong content in TLV fields. | |||||||||||||||||||||
| CloopguardStatsPortShutdownTime | 1.3.6.1.4.1.890.1.5.13.13.10.3.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Displays port shutdown time for loopguard detection on specific port. | |||||||||||||||||||||
| CloopguardStatsPortOperation | 1.3.6.1.4.1.890.1.5.13.13.10.3.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current 1 : Clears loopguard statistics (packet counter) on specific port.
| |||||||||||||||||||||
| TloopguardUniVlanTable | 1.3.6.1.4.1.890.1.5.13.13.10.4 | NA | |||||||||||||||||||
table · not-accessible · current Loop guard configuration table | |||||||||||||||||||||
| RloopguardUniVlanEntry | 1.3.6.1.4.1.890.1.5.13.13.10.4.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CloopguardUniVlanVid | 1.3.6.1.4.1.890.1.5.13.13.10.4.1.1 | INTEGER (1..4094) | RO | ||||||||||||||||||
column · INTEGER (1..4094) · read-only · current 1 to 4094 is normal vlan id | |||||||||||||||||||||
| CloopguardUniVlanPbit | 1.3.6.1.4.1.890.1.5.13.13.10.4.1.2 | INTEGER (0..7) | RW | ||||||||||||||||||
| CloopguardUniVlanRowStatus | 1.3.6.1.4.1.890.1.5.13.13.10.4.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current use 4(create and go) to create new row | |||||||||||||||||||||
| Ninterworking | 1.3.6.1.4.1.890.1.5.13.13.11 | ||||||||||||||||||||
| Natmvc | 1.3.6.1.4.1.890.1.5.13.13.11.1 | ||||||||||||||||||||
| SatmMaxNumOfVcPerPort | 1.3.6.1.4.1.890.1.5.13.13.11.1.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The maximum number of VC per port. | |||||||||||||||||||||
| TatmvcTable | 1.3.6.1.4.1.890.1.5.13.13.11.1.2 | NA | |||||||||||||||||||
table · not-accessible · current ATM VC configuration table | |||||||||||||||||||||
| RatmvcEntry | 1.3.6.1.4.1.890.1.5.13.13.11.1.2.1 | NA | |||||||||||||||||||
| CatmvcVpi | 1.3.6.1.4.1.890.1.5.13.13.11.1.2.1.1 | INTEGER (0..255) | RO | ||||||||||||||||||
| CatmvcVci | 1.3.6.1.4.1.890.1.5.13.13.11.1.2.1.2 | INTEGER (32..65535) | RO | ||||||||||||||||||
| CatmvcPriority | 1.3.6.1.4.1.890.1.5.13.13.11.1.2.1.3 | INTEGER (0..7) | RC | ||||||||||||||||||
column · INTEGER (0..7) · read-create · current The QoS priority of the ATM VC. The QoS priority must be unique in the VCs in the same UNI port. | |||||||||||||||||||||
| CatmvcEncap | 1.3.6.1.4.1.890.1.5.13.13.11.1.2.1.4 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current llc: LLC encapsulation vc: VC-MUX encapsulation
| |||||||||||||||||||||
| CatmvcRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.1.2.1.7 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| NportIsolation | 1.3.6.1.4.1.890.1.5.13.13.11.2 | ||||||||||||||||||||
| SportIsolationEnable | 1.3.6.1.4.1.890.1.5.13.13.11.2.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/Disable isolation between UNI ports
| |||||||||||||||||||||
| NvlanGlobal | 1.3.6.1.4.1.890.1.5.13.13.11.3 | ||||||||||||||||||||
| SvlanStagTpid | 1.3.6.1.4.1.890.1.5.13.13.11.3.1 | Unsigned32 (32768..65535) | RW | ||||||||||||||||||
scalar · Unsigned32 (32768..65535) · read-write · current Configures S-tag TPID value | |||||||||||||||||||||
| SvlanCtagTpid | 1.3.6.1.4.1.890.1.5.13.13.11.3.3 | Unsigned32 (32768..65535) | RW | ||||||||||||||||||
scalar · Unsigned32 (32768..65535) · read-write · current Configures C-tag TPID value | |||||||||||||||||||||
| TvlanPortPvidTable | 1.3.6.1.4.1.890.1.5.13.13.11.3.4 | NA | |||||||||||||||||||
table · not-accessible · current Display the arp table. | |||||||||||||||||||||
| RvlanPortPvidEntry | 1.3.6.1.4.1.890.1.5.13.13.11.3.4.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CvlanPortPvidValue | 1.3.6.1.4.1.890.1.5.13.13.11.3.4.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current port PVID | |||||||||||||||||||||
| CvlanPortPbitValue | 1.3.6.1.4.1.890.1.5.13.13.11.3.4.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current port pbit | |||||||||||||||||||||
| TvlanPortCopyCpbitTable | 1.3.6.1.4.1.890.1.5.13.13.11.3.5 | NA | |||||||||||||||||||
table · not-accessible · current Copy Cpbit to Spbit | |||||||||||||||||||||
| RvlanPortCopyCpbitEntry | 1.3.6.1.4.1.890.1.5.13.13.11.3.5.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CvlanPortCopyCpbitValue | 1.3.6.1.4.1.890.1.5.13.13.11.3.5.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current port copy Cpbit to Spbit
| |||||||||||||||||||||
| SvlanTagMode | 1.3.6.1.4.1.890.1.5.13.13.11.3.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Configures vlan tag mode. Packets sent from NNI tagged with S or C tag
| |||||||||||||||||||||
| TvlanPortFrameTypeTable | 1.3.6.1.4.1.890.1.5.13.13.11.3.8 | NA | |||||||||||||||||||
table · not-accessible · current Configures accepted frame type incoming to this interface. | |||||||||||||||||||||
| RvlanPortFrameTypeEntry | 1.3.6.1.4.1.890.1.5.13.13.11.3.8.1 | NA | |||||||||||||||||||
row · not-accessible · current Configures accepted frame type incoming to this interface.
| |||||||||||||||||||||
| CvlanPortFrameType | 1.3.6.1.4.1.890.1.5.13.13.11.3.8.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures accepted frame type incoming to this interface.
| |||||||||||||||||||||
| NvlanTrunk | 1.3.6.1.4.1.890.1.5.13.13.11.6 | ||||||||||||||||||||
| TvlanTrunkUntagPortTable | 1.3.6.1.4.1.890.1.5.13.13.11.6.1 | NA | |||||||||||||||||||
table · not-accessible · current Cross-connects untagged packet in the specified UNI PTM ports to the specified S VLAN or S + C VLAN on NNI ports. | |||||||||||||||||||||
| RvlanTrunkUntagPortEntry | 1.3.6.1.4.1.890.1.5.13.13.11.6.1.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CvlanTrunkUntagPortMode | 1.3.6.1.4.1.890.1.5.13.13.11.6.1.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag
| |||||||||||||||||||||
| CvlanTrunkUntagPortNniSvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.1.1.2 | VlanIndex (1..4094) | RW | ||||||||||||||||||
column · VlanIndex (1..4094) · read-write · current NNI S-tag VLAN ID | |||||||||||||||||||||
| CvlanTrunkUntagPortNniSpbit | 1.3.6.1.4.1.890.1.5.13.13.11.6.1.1.3 | INTEGER (0..7) | RW | ||||||||||||||||||
column · INTEGER (0..7) · read-write · current NNI S-tag pbit | |||||||||||||||||||||
| CvlanTrunkUntagPortNniCvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.1.1.4 | VlanIndex (1..4094) | RW | ||||||||||||||||||
column · VlanIndex (1..4094) · read-write · current NNI C-tag VLAN ID. if vlanTrunkUntagPortMode is sVlan(1), the value will be ignored and always return 0. | |||||||||||||||||||||
| CvlanTrunkUntagPortNniCpbit | 1.3.6.1.4.1.890.1.5.13.13.11.6.1.1.5 | INTEGER (0..7) | RW | ||||||||||||||||||
column · INTEGER (0..7) · read-write · current NNI C-tag pbit. if vlanTrunkUntagPortMode is sVlan(1), the value will be ignored and always return 0. | |||||||||||||||||||||
| CvlanTrunkUntagPortRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.6.1.1.6 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| TvlanTrunkUntagEtypePortTable | 1.3.6.1.4.1.890.1.5.13.13.11.6.2 | NA | |||||||||||||||||||
table · not-accessible · current Cross-connects untagged packet from the specified UNI PTM ports to the specified S VLAN or S + C VLAN on NNI ports per Etyer Type field in the packet. | |||||||||||||||||||||
| RvlanTrunkUntagEtypePortEntry | 1.3.6.1.4.1.890.1.5.13.13.11.6.2.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CvlanTrunkUntagEtypePortEtype | 1.3.6.1.4.1.890.1.5.13.13.11.6.2.1.1 | Unsigned32 (1536..65535) | RO | ||||||||||||||||||
column · Unsigned32 (1536..65535) · read-only · current Ether type | |||||||||||||||||||||
| CvlanTrunkUntagEtypePortMode | 1.3.6.1.4.1.890.1.5.13.13.11.6.2.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag
| |||||||||||||||||||||
| CvlanTrunkUntagEtypePortNniSvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.2.1.3 | VlanIndex (1..4094) | RW | ||||||||||||||||||
column · VlanIndex (1..4094) · read-write · current NNI S-tag VLAN ID | |||||||||||||||||||||
| CvlanTrunkUntagEtypePortNniSpbit | 1.3.6.1.4.1.890.1.5.13.13.11.6.2.1.4 | INTEGER (0..7) | RW | ||||||||||||||||||
column · INTEGER (0..7) · read-write · current NNI S-tag pbit | |||||||||||||||||||||
| CvlanTrunkUntagEtypePortNniCvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.2.1.5 | VlanIndex (1..4094) | RW | ||||||||||||||||||
column · VlanIndex (1..4094) · read-write · current NNI C-tag VLAN ID. if vlanTrunkUntagEtypePortMode is sVlan(1), the value will be ignored and always return 0. | |||||||||||||||||||||
| CvlanTrunkUntagEtypePortNniCpbit | 1.3.6.1.4.1.890.1.5.13.13.11.6.2.1.6 | INTEGER (0..7) | RW | ||||||||||||||||||
column · INTEGER (0..7) · read-write · current NNI C-tag pbit. if vlanTrunkUntagEtypePortMode is sVlan(1), the value will be ignored and always return 0. | |||||||||||||||||||||
| CvlanTrunkUntagEtypePortRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.6.2.1.7 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| TvlanTrunkTagPortTable | 1.3.6.1.4.1.890.1.5.13.13.11.6.3 | NA | |||||||||||||||||||
table · not-accessible · current Cross-connects uni-vid tagged packet in the specified UNI PTM ports to the S(uni-vid) VLAN if S VLAN is not specified or S(svid) + C(uni-vid) on NNI ports if S VLAN is specified. | |||||||||||||||||||||
| RvlanTrunkTagPortEntry | 1.3.6.1.4.1.890.1.5.13.13.11.6.3.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CvlanTrunkTagPortUniNniVlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.3.1.1 | VlanIndex (1..4094) | RO | ||||||||||||||||||
column · VlanIndex (1..4094) · read-only · current UNI VLAN ID. This VLAN is also used as S VLAN ID or C VLAN ID depends on which NNI VLAN tagging mode is configured. | |||||||||||||||||||||
| CvlanTrunkTagPortMode | 1.3.6.1.4.1.890.1.5.13.13.11.6.3.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag
| |||||||||||||||||||||
| CvlanTrunkTagPortNniSvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.3.1.3 | VlanIndex (1..4094) | RW | ||||||||||||||||||
column · VlanIndex (1..4094) · read-write · current NNI S VLAN ID. This field is used when vlanTrunkTagPortMode is configured as sPlusCxVlan(2). | |||||||||||||||||||||
| CvlanTrunkTagPortRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.6.3.1.4 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| TvlanTrunkUntagSubnetPortTable | 1.3.6.1.4.1.890.1.5.13.13.11.6.4 | NA | |||||||||||||||||||
table · not-accessible · current Cross-connects untagged packet from the specified UNI PTM ports to the specified S VLAN or S + C VLAN on NNI ports for specified IP subnet in the packet. | |||||||||||||||||||||
| RvlanTrunkUntagSubnetPortEntry | 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CvlanTrunkUntagSubnetPortIpAddressType | 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.1 | InetAddressType | RO | ||||||||||||||||||
column · InetAddressType · read-only · current VLAN trunk subnet IP address type
| |||||||||||||||||||||
| CvlanTrunkUntagSubnetPortIpAddress | 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.2 | InetAddress | RO | ||||||||||||||||||
column · InetAddress · read-only · current VLAN trunk subnet IP address <ipv4-address> 0.0.0.0 ~ 223.255.255.255 <ipv6-address> ::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff ipv4 address input format: # 0x00 0x00 0x00 0x00 ipv6 address input format: # 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Limit: vlanTrunkUntagSubnetPortIpAddressType must be set before vlanTrunkUntagSubnetPortIpAddress. | |||||||||||||||||||||
| CvlanTrunkUntagSubnetPortIpMask | 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.3 | INTEGER (0..128) | RO | ||||||||||||||||||
column · INTEGER (0..128) · read-only · current The netmask of the IP address. | |||||||||||||||||||||
| CvlanTrunkUntagSubnetPortMode | 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag
| |||||||||||||||||||||
| CvlanTrunkUntagSubnetPortNniSvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.5 | VlanIndex (1..4094) | RW | ||||||||||||||||||
column · VlanIndex (1..4094) · read-write · current NNI S-tag VLAN ID | |||||||||||||||||||||
| CvlanTrunkUntagSubnetPortNniSpbit | 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.6 | INTEGER (0..7) | RW | ||||||||||||||||||
column · INTEGER (0..7) · read-write · current NNI S-tag pbit | |||||||||||||||||||||
| CvlanTrunkUntagSubnetPortNniCvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.7 | VlanIndex (1..4094) | RW | ||||||||||||||||||
column · VlanIndex (1..4094) · read-write · current NNI C-tag VLAN ID. if vlanTrunkUntagSubnetPortMode is sVlan(1), the value will be ignored and always return 0. | |||||||||||||||||||||
| CvlanTrunkUntagSubnetPortNniCpbit | 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.8 | INTEGER (0..7) | RW | ||||||||||||||||||
column · INTEGER (0..7) · read-write · current NNI C-tag pbit. if vlanTrunkUntagSubnetPortMode is sVlan(1), the value will be ignored and always return 0. | |||||||||||||||||||||
| CvlanTrunkUntagSubnetPortRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.9 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| TvlanTrunkUntagVcTable | 1.3.6.1.4.1.890.1.5.13.13.11.6.5 | NA | |||||||||||||||||||
table · not-accessible · current Cross-connects untagged packet in the specified UNI ATM virtual circuits to the specified S VLAN or S + C VLAN on NNI ports. | |||||||||||||||||||||
| RvlanTrunkUntagVcEntry | 1.3.6.1.4.1.890.1.5.13.13.11.6.5.1 | NA | |||||||||||||||||||
| CvlanTrunkUntagVcMode | 1.3.6.1.4.1.890.1.5.13.13.11.6.5.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag
| |||||||||||||||||||||
| CvlanTrunkUntagVcNniSvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.5.1.2 | VlanIndex (1..4093) | RW | ||||||||||||||||||
column · VlanIndex (1..4093) · read-write · current NNI S-tag VLAN ID | |||||||||||||||||||||
| CvlanTrunkUntagVcNniSpbit | 1.3.6.1.4.1.890.1.5.13.13.11.6.5.1.3 | INTEGER (0..7) | RW | ||||||||||||||||||
column · INTEGER (0..7) · read-write · current NNI S-tag pbit | |||||||||||||||||||||
| CvlanTrunkUntagVcNniCvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.5.1.4 | VlanIndex (1..4093) | RW | ||||||||||||||||||
column · VlanIndex (1..4093) · read-write · current NNI C-tag VLAN ID. if vlanTrunkUntagVcMode is sVlan(1), the value will be ignored and always return 0. | |||||||||||||||||||||
| CvlanTrunkUntagVcNniCpbit | 1.3.6.1.4.1.890.1.5.13.13.11.6.5.1.5 | INTEGER (0..7) | RW | ||||||||||||||||||
column · INTEGER (0..7) · read-write · current NNI C-tag pbit. if vlanTrunkUntagVcMode is sVlan(1), the value will be ignored and always return 0. | |||||||||||||||||||||
| CvlanTrunkUntagVcRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.6.5.1.6 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| TvlanTrunkUntagEtypeVcTable | 1.3.6.1.4.1.890.1.5.13.13.11.6.6 | NA | |||||||||||||||||||
table · not-accessible · current Cross-connects untagged packet from the specified UNI ATM virtual circuits to the specified S VLAN or S + C VLAN on NNI ports per Etyer Type field in the packet. | |||||||||||||||||||||
| RvlanTrunkUntagEtypeVcEntry | 1.3.6.1.4.1.890.1.5.13.13.11.6.6.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CvlanTrunkUntagEtypeVcEtype | 1.3.6.1.4.1.890.1.5.13.13.11.6.6.1.1 | Unsigned32 (1536..65535) | RO | ||||||||||||||||||
column · Unsigned32 (1536..65535) · read-only · current Ether type | |||||||||||||||||||||
| CvlanTrunkUntagEtypeVcMode | 1.3.6.1.4.1.890.1.5.13.13.11.6.6.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag
| |||||||||||||||||||||
| CvlanTrunkUntagEtypeVcNniSvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.6.1.3 | VlanIndex (1..4093) | RW | ||||||||||||||||||
column · VlanIndex (1..4093) · read-write · current NNI S-tag VLAN ID | |||||||||||||||||||||
| CvlanTrunkUntagEtypeVcNniSpbit | 1.3.6.1.4.1.890.1.5.13.13.11.6.6.1.4 | INTEGER (0..7) | RW | ||||||||||||||||||
column · INTEGER (0..7) · read-write · current NNI S-tag pbit | |||||||||||||||||||||
| CvlanTrunkUntagEtypeVcNniCvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.6.1.5 | VlanIndex (1..4093) | RW | ||||||||||||||||||
column · VlanIndex (1..4093) · read-write · current NNI C-tag VLAN ID. if vlanTrunkUntagEtypeVcMode is sVlan(1), the value will be ignored and always return 0. | |||||||||||||||||||||
| CvlanTrunkUntagEtypeVcNniCpbit | 1.3.6.1.4.1.890.1.5.13.13.11.6.6.1.6 | INTEGER (0..7) | RW | ||||||||||||||||||
column · INTEGER (0..7) · read-write · current NNI C-tag pbit. if vlanTrunkUntagEtypeVcMode is sVlan(1), the value will be ignored and always return 0. | |||||||||||||||||||||
| CvlanTrunkUntagEtypeVcRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.6.6.1.7 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| TvlanTrunkTagVcTable | 1.3.6.1.4.1.890.1.5.13.13.11.6.7 | NA | |||||||||||||||||||
table · not-accessible · current Cross-connects uni-vid tagged packet in the specified UNI ATM virtual circuits to the S(uni-vid) VLAN if svlan is not specified or S(svid) + C(uni-vid) on NNI ports if svlan is specified. | |||||||||||||||||||||
| RvlanTrunkTagVcEntry | 1.3.6.1.4.1.890.1.5.13.13.11.6.7.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CvlanTrunkTagVcUniNniVlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.7.1.1 | VlanIndex (1..4093) | RO | ||||||||||||||||||
column · VlanIndex (1..4093) · read-only · current UNI VLAN ID. This VLAN is also used as S VLAN ID or C VLAN ID depends on which NNI VLAN tagging mode is configured. | |||||||||||||||||||||
| CvlanTrunkTagVcMode | 1.3.6.1.4.1.890.1.5.13.13.11.6.7.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag
| |||||||||||||||||||||
| CvlanTrunkTagVcNniSvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.7.1.3 | VlanIndex (1..4093) | RW | ||||||||||||||||||
column · VlanIndex (1..4093) · read-write · current NNI S VLAN ID. This field is used when vlanTrunkTagPortMode is configured as sPlusCxVlan(2). | |||||||||||||||||||||
| CvlanTrunkTagVcRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.6.7.1.4 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| TvlanTrunkUntagSubnetVcTable | 1.3.6.1.4.1.890.1.5.13.13.11.6.8 | NA | |||||||||||||||||||
table · not-accessible · current Cross-connects untagged packet from the specified UNI ATM virtual circuits to the specified S VLAN or S + C VLAN on NNI ports for specified IP subnet in the packet. | |||||||||||||||||||||
| RvlanTrunkUntagSubnetVcEntry | 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CvlanTrunkUntagSubnetVcIpAddressType | 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.1 | InetAddressType | RO | ||||||||||||||||||
column · InetAddressType · read-only · current VLAN trunk subnet IP address type
| |||||||||||||||||||||
| CvlanTrunkUntagSubnetVcIpAddress | 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.2 | InetAddress | RO | ||||||||||||||||||
column · InetAddress · read-only · current VLAN trunk subnet IP address <ipv4-address> 0.0.0.0 ~ 223.255.255.255 <ipv6-address> ::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff ipv4 address input format: # 0x00 0x00 0x00 0x00 ipv6 address input format: # 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Limit: vlanTrunkUntagSubnetVcIpAddressType must be set before vlanTrunkUntagSubnetVcIpAddress. | |||||||||||||||||||||
| CvlanTrunkUntagSubnetVcIpMask | 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.3 | INTEGER (0..128) | RO | ||||||||||||||||||
column · INTEGER (0..128) · read-only · current The netmask of the IP address. | |||||||||||||||||||||
| CvlanTrunkUntagSubnetVcMode | 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag
| |||||||||||||||||||||
| CvlanTrunkUntagSubnetVcNniSvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.5 | VlanIndex (1..4094) | RW | ||||||||||||||||||
column · VlanIndex (1..4094) · read-write · current NNI S-tag VLAN ID | |||||||||||||||||||||
| CvlanTrunkUntagSubnetVcNniSpbit | 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.6 | INTEGER (0..7) | RW | ||||||||||||||||||
column · INTEGER (0..7) · read-write · current NNI S-tag pbit | |||||||||||||||||||||
| CvlanTrunkUntagSubnetVcNniCvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.7 | VlanIndex (1..4094) | RW | ||||||||||||||||||
column · VlanIndex (1..4094) · read-write · current NNI C-tag VLAN ID. if vlanTrunkUntagSubnetVcMode is sVlan(1), the value will be ignored and always return 0. | |||||||||||||||||||||
| CvlanTrunkUntagSubnetVcNniCpbit | 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.8 | INTEGER (0..7) | RW | ||||||||||||||||||
column · INTEGER (0..7) · read-write · current NNI C-tag pbit. if vlanTrunkUntagSubnetVcMode is sVlan(1), the value will be ignored and always return 0. | |||||||||||||||||||||
| CvlanTrunkUntagSubnetVcRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.9 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| NvlanTranslation | 1.3.6.1.4.1.890.1.5.13.13.11.7 | ||||||||||||||||||||
| TvlanTranslationPortTable | 1.3.6.1.4.1.890.1.5.13.13.11.7.1 | NA | |||||||||||||||||||
table · not-accessible · current Cross-connects uni-vid tagged packet in the specified UNI PTM ports to the S(svid) VLAN or S(svid) + C(cvid) on NNI ports. | |||||||||||||||||||||
| RvlanTranslationPortEntry | 1.3.6.1.4.1.890.1.5.13.13.11.7.1.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CvlanTranslationPortUniVlan | 1.3.6.1.4.1.890.1.5.13.13.11.7.1.1.1 | VlanIndex (1..4094) | RO | ||||||||||||||||||
column · VlanIndex (1..4094) · read-only · current UNI VLAN ID | |||||||||||||||||||||
| CvlanTranslationPortMode | 1.3.6.1.4.1.890.1.5.13.13.11.7.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag
| |||||||||||||||||||||
| CvlanTranslationPortNniSvlan | 1.3.6.1.4.1.890.1.5.13.13.11.7.1.1.3 | VlanIndex (1..4094) | RW | ||||||||||||||||||
column · VlanIndex (1..4094) · read-write · current NNI S VLAN ID | |||||||||||||||||||||
| CvlanTranslationPortNniCvlan | 1.3.6.1.4.1.890.1.5.13.13.11.7.1.1.4 | VlanIndex (1..4094) | RW | ||||||||||||||||||
column · VlanIndex (1..4094) · read-write · current NNI C VLAN ID | |||||||||||||||||||||
| CvlanTranslationPortRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.7.1.1.5 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| CvlanTranslationPortNniSPrio | 1.3.6.1.4.1.890.1.5.13.13.11.7.1.1.6 | INTEGER (0..8) | RW | ||||||||||||||||||
column · INTEGER (0..8) · read-write · current NNI priority 0~7. Specify 8 to not replace the priority. | |||||||||||||||||||||
| TvlanTranslationVcTable | 1.3.6.1.4.1.890.1.5.13.13.11.7.2 | NA | |||||||||||||||||||
table · not-accessible · current Cross-connects uni-vid tagged packet in the specified UNI ATM virtual circuits to the S(svid) VLAN or S(svid) + C(cvid) on NNI ports. | |||||||||||||||||||||
| RvlanTranslationVcEntry | 1.3.6.1.4.1.890.1.5.13.13.11.7.2.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CvlanTranslationVcUniVlan | 1.3.6.1.4.1.890.1.5.13.13.11.7.2.1.1 | VlanIndex (1..4093) | RO | ||||||||||||||||||
column · VlanIndex (1..4093) · read-only · current UNI VLAN ID | |||||||||||||||||||||
| CvlanTranslationVcMode | 1.3.6.1.4.1.890.1.5.13.13.11.7.2.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag
| |||||||||||||||||||||
| CvlanTranslationVcNniSvlan | 1.3.6.1.4.1.890.1.5.13.13.11.7.2.1.3 | VlanIndex (1..4093) | RW | ||||||||||||||||||
column · VlanIndex (1..4093) · read-write · current NNI S VLAN ID | |||||||||||||||||||||
| CvlanTranslationVcNniCvlan | 1.3.6.1.4.1.890.1.5.13.13.11.7.2.1.4 | VlanIndex (1..4093) | RW | ||||||||||||||||||
column · VlanIndex (1..4093) · read-write · current NNI S VLAN ID. if vlanTranslationVcMode is sVlan(1), the value will be ignored and always return 0. | |||||||||||||||||||||
| CvlanTranslationVcRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.7.2.1.5 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| CvlanTranslationVcNniSPrio | 1.3.6.1.4.1.890.1.5.13.13.11.7.2.1.6 | INTEGER (0..8) | RW | ||||||||||||||||||
column · INTEGER (0..8) · read-write · current NNI priority 0~7. Specify 8 to not replace the priority. | |||||||||||||||||||||
| NvlanTls | 1.3.6.1.4.1.890.1.5.13.13.11.8 | ||||||||||||||||||||
| TvlanTlsPortTable | 1.3.6.1.4.1.890.1.5.13.13.11.8.1 | NA | |||||||||||||||||||
table · not-accessible · current Enables Transparent LAN service on the specified UNI PTM ports. The packets are tagged with S tag on NNI ports. | |||||||||||||||||||||
| RvlanTlsPortEntry | 1.3.6.1.4.1.890.1.5.13.13.11.8.1.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CvlanTlsPortNniSvlan | 1.3.6.1.4.1.890.1.5.13.13.11.8.1.1.1 | VlanIndex (1..4094) | RW | ||||||||||||||||||
column · VlanIndex (1..4094) · read-write · current NNI S VLAN ID | |||||||||||||||||||||
| CvlanTlsPortNniSpbit | 1.3.6.1.4.1.890.1.5.13.13.11.8.1.1.2 | INTEGER (0..7) | RW | ||||||||||||||||||
column · INTEGER (0..7) · read-write · current NNI S PBIT. Used when vlanTlsPortNniForceSpbit is set to enable(1) | |||||||||||||||||||||
| CvlanTlsPortNniForceSpbit | 1.3.6.1.4.1.890.1.5.13.13.11.8.1.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Force SPBIT per vlanTlsPortNniSpbit
| |||||||||||||||||||||
| CvlanTlsPortRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.8.1.1.4 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| TvlanTlsVcTable | 1.3.6.1.4.1.890.1.5.13.13.11.8.2 | NA | |||||||||||||||||||
table · not-accessible · current Enables Transparent LAN service on the specified UNI ATM virtual circuits. The packets is tagged with S tag on NNI ports. | |||||||||||||||||||||
| RvlanTlsVcEntry | 1.3.6.1.4.1.890.1.5.13.13.11.8.2.1 | NA | |||||||||||||||||||
| CvlanTlsVcNniSvlan | 1.3.6.1.4.1.890.1.5.13.13.11.8.2.1.1 | VlanIndex (1..4093) | RW | ||||||||||||||||||
column · VlanIndex (1..4093) · read-write · current NNI S VLAN ID | |||||||||||||||||||||
| CvlanTlsVcNniSpbit | 1.3.6.1.4.1.890.1.5.13.13.11.8.2.1.2 | INTEGER (0..7) | RW | ||||||||||||||||||
column · INTEGER (0..7) · read-write · current NNI S PBIT. Used when vlanTlsVcNniForceSpbit is set to enable(1) | |||||||||||||||||||||
| CvlanTlsVcNniForceSpbit | 1.3.6.1.4.1.890.1.5.13.13.11.8.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Force SPBIT per vlanTlsVcNniSpbit
| |||||||||||||||||||||
| CvlanTlsVcRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.8.2.1.4 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| Nfdb | 1.3.6.1.4.1.890.1.5.13.13.11.9 | ||||||||||||||||||||
| SfdbAgingTime | 1.3.6.1.4.1.890.1.5.13.13.11.9.1 | INTEGER (10..3600) | RW | ||||||||||||||||||
scalar · INTEGER (10..3600) · read-write · current Configures FDB aging time from 10 to 3600s. (OLC minimum aging-time is 30s)
| |||||||||||||||||||||
| NfdbOps | 1.3.6.1.4.1.890.1.5.13.13.11.9.2 | ||||||||||||||||||||
| SfdbTarget | 1.3.6.1.4.1.890.1.5.13.13.11.9.2.1 | PortList | RW | ||||||||||||||||||
scalar · PortList · read-write · current Specifies the target ifindex for fdbOperation | |||||||||||||||||||||
| SfdbOperation | 1.3.6.1.4.1.890.1.5.13.13.11.9.2.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Flush FDB flushFDBxAddressTable(1) - flush all entries in FDB table flushFDBAddressTableForSpecifiedPorts(1) - flush entries on specified port in FDB table
| |||||||||||||||||||||
| TfdbPortConfTable | 1.3.6.1.4.1.890.1.5.13.13.11.9.3 | NA | |||||||||||||||||||
| RfdbPortConfEntry | 1.3.6.1.4.1.890.1.5.13.13.11.9.3.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CfdbPortConfMaxNumOfMacEntries | 1.3.6.1.4.1.890.1.5.13.13.11.9.3.1.1 | INTEGER (1..256) | RW | ||||||||||||||||||
column · INTEGER (1..256) · read-write · current Configures FDB maximum MAC entry counts for speicifed UNI ports | |||||||||||||||||||||
| TfdbPortUniVlanConfTable | 1.3.6.1.4.1.890.1.5.13.13.11.9.5 | NA | |||||||||||||||||||
| RfdbPortUniVlanConfEntry | 1.3.6.1.4.1.890.1.5.13.13.11.9.5.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CfdbPortVlanConfUniVlan | 1.3.6.1.4.1.890.1.5.13.13.11.9.5.1.1 | VlanIndex (1..4094) | RO | ||||||||||||||||||
column · VlanIndex (1..4094) · read-only · current speicifed UNI VLAN | |||||||||||||||||||||
| CfdbPortVlanConfMaxNumOfMacEntries | 1.3.6.1.4.1.890.1.5.13.13.11.9.5.1.2 | INTEGER (1..256) | RC | ||||||||||||||||||
column · INTEGER (1..256) · read-create · current Configures FDB maximum MAC entry counts for speicifed UNI ports and UNI VLAN | |||||||||||||||||||||
| CfdbPortVlanConfRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.9.5.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| TfdbStaticMacTable | 1.3.6.1.4.1.890.1.5.13.13.11.9.6 | NA | |||||||||||||||||||
table · not-accessible · current Configures static MAC entry on specified UNI ports. | |||||||||||||||||||||
| RfdbStaticMacEntry | 1.3.6.1.4.1.890.1.5.13.13.11.9.6.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CfdbStaticMacVlanId | 1.3.6.1.4.1.890.1.5.13.13.11.9.6.1.1 | VlanIndex (0..4094) | RO | ||||||||||||||||||
column · VlanIndex (0..4094) · read-only · current vlan id:1 ~ 4094, determined by VLAN model VLAN model | <vlan> ---------------------------------- Trunk uni-vlan | uni-vid Trunk uni-untag | svlan Trunk etype(S) | svlan Trunk etype(S+C) | cvlan Translation | uni-vid Transparent | no support TLS | no support | |||||||||||||||||||||
| CfdbStaticMacPhysAddress | 1.3.6.1.4.1.890.1.5.13.13.11.9.6.1.2 | PhysAddress (SIZE (6)) | RO | ||||||||||||||||||
column · PhysAddress (SIZE (6)) · read-only · current MAC address | |||||||||||||||||||||
| CfdbStaticMacRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.9.6.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| TfdbMacLearningVlanTable | 1.3.6.1.4.1.890.1.5.13.13.11.9.7 | NA | |||||||||||||||||||
table · not-accessible · current MAC learning entry sorted by VLAN ID. | |||||||||||||||||||||
| RfdbMacLearningVlanEntry | 1.3.6.1.4.1.890.1.5.13.13.11.9.7.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CfdbMacLearningVlanPhysAddress | 1.3.6.1.4.1.890.1.5.13.13.11.9.7.1.4 | PhysAddress (SIZE (6)) | RO | ||||||||||||||||||
column · PhysAddress (SIZE (6)) · read-only · current MAC address | |||||||||||||||||||||
| CfdbMacLearningVlanPort | 1.3.6.1.4.1.890.1.5.13.13.11.9.7.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current ifIndex the MAC is learnt on | |||||||||||||||||||||
| CfdbMacLearningVlanType | 1.3.6.1.4.1.890.1.5.13.13.11.9.7.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current MAC learning type
| |||||||||||||||||||||
| CfdbMacLearningVlanVlanId | 1.3.6.1.4.1.890.1.5.13.13.11.9.7.1.8 | VlanIndex (0..4094) | RO | ||||||||||||||||||
column · VlanIndex (0..4094) · read-only · current S VLAN ID 0 ~ 4094. | |||||||||||||||||||||
| TfdbAntiSpoofingTable | 1.3.6.1.4.1.890.1.5.13.13.11.9.8 | NA | |||||||||||||||||||
table · not-accessible · current A table that contains anti MAC spoofing configuration per interface. | |||||||||||||||||||||
| RfdbAntiSpoofingEntry | 1.3.6.1.4.1.890.1.5.13.13.11.9.8.1 | NA | |||||||||||||||||||
| CfdbAntiSpoofing | 1.3.6.1.4.1.890.1.5.13.13.11.9.8.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable/Disable fdb anti-spoofing. enable: the anti-spoofing mac will be learned on the first port which receives the packet with it as source mac. When anti-spoofing is detected, anti-spoofing alarm will be issued. disable: the anti-spoofing mac will be learned on the latest port which receives the packet with it as source mac. When anti-spoofing is detected, anti-spoofing alarm will be issued.
| |||||||||||||||||||||
| CfdbSpoofingAction | 1.3.6.1.4.1.890.1.5.13.13.11.9.8.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable/Disable spoofing action function. enable: disable port when anti-spoofing is detected. disable: do nothing when anti-spoofing is detected.
| |||||||||||||||||||||
| TetherMtuTable | 1.3.6.1.4.1.890.1.5.13.13.11.11 | NA | |||||||||||||||||||
table · not-accessible · current A table that contains Ethernet Frame Size configuration per interface. | |||||||||||||||||||||
| RetherMtuEntry | 1.3.6.1.4.1.890.1.5.13.13.11.11.1 | NA | |||||||||||||||||||
| CmtuSize | 1.3.6.1.4.1.890.1.5.13.13.11.11.1.1 | INTEGER (512..9216) | RW | ||||||||||||||||||
column · INTEGER (512..9216) · read-write · current Configures maximum frame size in unit of bytes | |||||||||||||||||||||
| Nsmcast | 1.3.6.1.4.1.890.1.5.13.13.11.12 | ||||||||||||||||||||
| TsmcastMacTable | 1.3.6.1.4.1.890.1.5.13.13.11.12.1 | NA | |||||||||||||||||||
table · not-accessible · current Configures static Multicast MAC on Uni port. | |||||||||||||||||||||
| RsmcastMacEntry | 1.3.6.1.4.1.890.1.5.13.13.11.12.1.1 | NA | |||||||||||||||||||
row · not-accessible · current A table entry for static Multicast MAC table.
| |||||||||||||||||||||
| CsmcastMacAddress | 1.3.6.1.4.1.890.1.5.13.13.11.12.1.1.1 | PhysAddress | RC | ||||||||||||||||||
column · PhysAddress · read-create · current Static multicast group mac address, can be any multicast MAC except the following: 01:80:c2:00:00:00~01:80:c2:00:00:3f, 01:00:5e:00:00:00~01:00:5e:ff:ff:ff. | |||||||||||||||||||||
| CsmcastMacVlan | 1.3.6.1.4.1.890.1.5.13.13.11.12.1.1.2 | VlanIndex (1..4094) | RC | ||||||||||||||||||
column · VlanIndex (1..4094) · read-create · current Specifies NNI VLAN ID | |||||||||||||||||||||
| CsmcastMacRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.12.1.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| TsmcastMacNniTable | 1.3.6.1.4.1.890.1.5.13.13.11.12.2 | NA | |||||||||||||||||||
table · not-accessible · current Configures static Multicast MAC for MSC card. | |||||||||||||||||||||
| RsmcastMacNniEntry | 1.3.6.1.4.1.890.1.5.13.13.11.12.2.1 | NA | |||||||||||||||||||
row · not-accessible · current A table entry for static Multicast MAC table for MSC card. | |||||||||||||||||||||
| CsmcastMacNniAddress | 1.3.6.1.4.1.890.1.5.13.13.11.12.2.1.1 | PhysAddress | RC | ||||||||||||||||||
column · PhysAddress · read-create · current Static multicast group mac address, can be any multicast MAC except the following: 01:80:c2:00:00:00~01:80:c2:00:00:ff, 01:00:5e:00:00:00~01:00:5e:7f:ff:ff. | |||||||||||||||||||||
| CsmcastMacNniVlan | 1.3.6.1.4.1.890.1.5.13.13.11.12.2.1.2 | VlanIndex (1..4094) | RC | ||||||||||||||||||
column · VlanIndex (1..4094) · read-create · current Specifies NNI VLAN ID | |||||||||||||||||||||
| CsmcastMacNniRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.12.2.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| TsmcastIpTable | 1.3.6.1.4.1.890.1.5.13.13.11.12.3 | NA | |||||||||||||||||||
table · not-accessible · current Configures static Multicast IP for MSC card. | |||||||||||||||||||||
| RsmcastIpEntry | 1.3.6.1.4.1.890.1.5.13.13.11.12.3.1 | NA | |||||||||||||||||||
row · not-accessible · current A table entry for static Multicast IP table for MSC card.
| |||||||||||||||||||||
| CsmcastIpAddress | 1.3.6.1.4.1.890.1.5.13.13.11.12.3.1.1 | IpAddress | RC | ||||||||||||||||||
column · IpAddress · read-create · current Static multicast group IP address. (224.0.0.0 ~ 239.255.255.255) | |||||||||||||||||||||
| CsmcastIpVlan | 1.3.6.1.4.1.890.1.5.13.13.11.12.3.1.2 | VlanIndex (1..4094) | RC | ||||||||||||||||||
column · VlanIndex (1..4094) · read-create · current NNI VLAN ID (1~4094) | |||||||||||||||||||||
| CsmcastIpRole | 1.3.6.1.4.1.890.1.5.13.13.11.12.3.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current forbid: block multicast traffic and IGMP, fix: allow multicast traffic and drop IGMP
| |||||||||||||||||||||
| CsmcastIpRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.12.3.1.4 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| Nmirror | 1.3.6.1.4.1.890.1.5.13.13.11.13 | ||||||||||||||||||||
| SmirrorEnable | 1.3.6.1.4.1.890.1.5.13.13.11.13.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current set to 'enable' to enable mirroring
| |||||||||||||||||||||
| SmirrorMonitorPort | 1.3.6.1.4.1.890.1.5.13.13.11.13.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current monitor port | |||||||||||||||||||||
| TmirrorPortTable | 1.3.6.1.4.1.890.1.5.13.13.11.13.3 | NA | |||||||||||||||||||
table · not-accessible · current This table is supported by R5.06 and later versions. | |||||||||||||||||||||
| RmirrorPortEntry | 1.3.6.1.4.1.890.1.5.13.13.11.13.3.1 | NA | |||||||||||||||||||
| CmirrorPortDirection | 1.3.6.1.4.1.890.1.5.13.13.11.13.3.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Set to 'ingress' to mirror ingress traffic, 'egress' to mirror egress traffic, 'both' to mirror bi-directional traffic, 'none' to disable mirroring in this port
| |||||||||||||||||||||
| CmirrorPortVlan | 1.3.6.1.4.1.890.1.5.13.13.11.13.3.1.2 | INTEGER (0..4094) | RW | ||||||||||||||||||
column · INTEGER (0..4094) · read-write · current Specific the vlan which want to monitored. If the vlan value is 9999 denotes monitor all data traffic from specific port. If the vlan value is 0 denotes monitor untag data traffic from specific vdsl port. | |||||||||||||||||||||
| NvlanIsolation | 1.3.6.1.4.1.890.1.5.13.13.11.14 | ||||||||||||||||||||
| TvlanIsolationTable | 1.3.6.1.4.1.890.1.5.13.13.11.14.1 | NA | |||||||||||||||||||
table · not-accessible · current A table contains configuration of isolated VLAN. | |||||||||||||||||||||
| RvlanIsolationEntry | 1.3.6.1.4.1.890.1.5.13.13.11.14.1.1 | NA | |||||||||||||||||||
| CvlanIsolationRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.14.1.1.1 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table used to create/delete an entry. | |||||||||||||||||||||
| Npppoe | 1.3.6.1.4.1.890.1.5.13.13.12 | ||||||||||||||||||||
| TpppoeAgentTable | 1.3.6.1.4.1.890.1.5.13.13.12.1 | NA | |||||||||||||||||||
table · not-accessible · current A table that contains PPPoE intermediate agent configuration. | |||||||||||||||||||||
| RpppoeAgentEntry | 1.3.6.1.4.1.890.1.5.13.13.12.1.1 | NA | |||||||||||||||||||
| CpppoeAgentVlanId | 1.3.6.1.4.1.890.1.5.13.13.12.1.1.1 | VlanIndex (1..4094) | RO | ||||||||||||||||||
column · VlanIndex (1..4094) · read-only · current Specify the VLAN ID for the pppoeAgent configuration | |||||||||||||||||||||
| CpppoeAgentMode | 1.3.6.1.4.1.890.1.5.13.13.12.1.1.2 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current pppoeIA(1) - PPPoE intermediate agent function is enabled
| |||||||||||||||||||||
| CpppoeAgentCircuitIDInfo | 1.3.6.1.4.1.890.1.5.13.13.12.1.1.4 | DisplayString (SIZE (0..127)) | RC | ||||||||||||||||||
column · DisplayString (SIZE (0..127)) · read-create · current User specific PPPoE circuit ID info.
Note: When transform info to circuit ID, the transform result
will be truncated to 63 characters
Info is composed by the following components
special characters except % => ~`!@#$^&*()-=_+{}<>,./
%%: equals character %
%0x00~%0xFF: represents byte value
%pname: configured port name
%ptel: configured port telephone No.
%pid: port index
%chvpi: channel vpi
%chvci: channel vci
%chid : in non DSL ATM channel, this field represents UNI VLAN ID,
in DSL ATM channel, this field represents %chvpi.%chvci
%slotid: slot index of the logic port
%svlan: SVLAN ID which PPPoE client runs on
%cvlan: CVLAN ID which PPPoE client runs on
%hname: host device name
%cmac1: MAC address of client, represents as XX:XX:XX:XX:XX:XX where X=0~F
%cmac2: MAC address of client, represents as XXXXXXXXXXXX where X=0~F
%cmac3: MAC address of client, represents as Byte
%dmac1: MAC address of host device, represents as XX:XX:XX:XX:XX:XX where X=0~F
%dmac2: MAC address of host device, represents as XXXXXXXXXXXX where X=0~F
%dmac3: MAC address of host device, represents as Byte
%phtype: represents as atm in ATM or represents as eth in Ethernet
%hmodel: model name of host device
%fwid: host device firmware ID
%blank: blank character
%ont: ont ID
%ontc: ont card ID
%uniport: uniport ID
%sn: ont serial number | |||||||||||||||||||||
| CpppoeAgentRemoteIDInfo | 1.3.6.1.4.1.890.1.5.13.13.12.1.1.6 | DisplayString (SIZE (0..127)) | RC | ||||||||||||||||||
column · DisplayString (SIZE (0..127)) · read-create · current User specific PPPoE remote ID info.
Note: When transform info to remote ID, the transform result
will be truncated to 63 characters
Info is composed by the following components
special characters except % => ~`!@#$^&*()-=_+{}<>,./
%%: equals character %
%0x00~%0xFF: represents byte value
%pname: configured port name
%ptel: configured port telephone No.
%pid: port index
%chvpi: channel vpi
%chvci: channel vci
%chid : in non DSL ATM channel, this field represents UNI VLAN ID,
in DSL ATM channel, this field represents %chvpi.%chvci
%slotid: slot index of the logic port
%svlan: SVLAN ID which PPPoE client runs on
%cvlan: CVLAN ID which PPPoE client runs on
%hname: host device name
%cmac1: MAC address of client, represents as XX:XX:XX:XX:XX:XX where X=0~F
%cmac2: MAC address of client, represents as XXXXXXXXXXXX where X=0~F
%cmac3: MAC address of client, represents as Byte
%dmac1: MAC address of host device, represents as XX:XX:XX:XX:XX:XX where X=0~F
%dmac2: MAC address of host device, represents as XXXXXXXXXXXX where X=0~F
%dmac3: MAC address of host device, represents as Byte
%phtype: represents as atm in ATM or represents as eth in Ethernet
%hmodel: model name of host device
%fwid: host device firmware ID
%blank: blank character
%ont: ont ID
%ontc: ont card ID
%uniport: uniport ID
%sn: ont serial number | |||||||||||||||||||||
| CpppoeAgentOptPolicyVlan | 1.3.6.1.4.1.890.1.5.13.13.12.1.1.7 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current Select PPPoE option policy in specified VLAN.
| |||||||||||||||||||||
| CpppoeAgentRowStatus | 1.3.6.1.4.1.890.1.5.13.13.12.1.1.8 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| CpppoeAgentOptLinechar | 1.3.6.1.4.1.890.1.5.13.13.12.1.1.9 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current Select PPPoE option linechar in specified VLAN.
| |||||||||||||||||||||
| TpppoeStatisticTable | 1.3.6.1.4.1.890.1.5.13.13.12.2 | NA | |||||||||||||||||||
| RpppoeStatisticEntry | 1.3.6.1.4.1.890.1.5.13.13.12.2.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CpppoeStatisticRxPADi | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.1 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current counter for PADi | |||||||||||||||||||||
| CpppoeStatisticRxPADo | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.2 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current counter for PADo | |||||||||||||||||||||
| CpppoeStatisticRxPADr | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.3 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current counter for PADr | |||||||||||||||||||||
| CpppoeStatisticRxPADs | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.4 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current counter for PADs | |||||||||||||||||||||
| CpppoeStatisticRxPADt | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.5 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current counter for PADt | |||||||||||||||||||||
| CpppoeStatisticRxErrSvcName | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.6 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current counter for service name error | |||||||||||||||||||||
| CpppoeStatisticRxErrAcSys | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.7 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current counter for AC system error | |||||||||||||||||||||
| CpppoeStatisticRxErrGeneric | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.8 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current counter for generic error | |||||||||||||||||||||
| CpppoeStatisticTxPADi | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.9 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current counter for PADi | |||||||||||||||||||||
| CpppoeStatisticTxPADo | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.10 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current counter for PADo | |||||||||||||||||||||
| CpppoeStatisticTxPADr | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.11 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current counter for PADr | |||||||||||||||||||||
| CpppoeStatisticTxPADs | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.12 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current counter for PADs | |||||||||||||||||||||
| CpppoeStatisticTxPADt | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.13 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current counter for PADt | |||||||||||||||||||||
| CpppoeStatisticTxErrGeneric | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.14 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current counter for generic error | |||||||||||||||||||||
| CpppoeStatisticOperation | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.15 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Clears pppoe statistic on specific port.
| |||||||||||||||||||||
| TpppoeAgentPortTable | 1.3.6.1.4.1.890.1.5.13.13.12.3 | NA | |||||||||||||||||||
table · not-accessible · current A table that contains PPPoE agent configuration for specified linecard ports. | |||||||||||||||||||||
| RpppoeAgentPortEntry | 1.3.6.1.4.1.890.1.5.13.13.12.3.1 | NA | |||||||||||||||||||
| CpppoeAgentOptPolicyPort | 1.3.6.1.4.1.890.1.5.13.13.12.3.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Select PPPoE option policy on specified linecard ports.
| |||||||||||||||||||||
| SpppoeAgentOptPolicyMode | 1.3.6.1.4.1.890.1.5.13.13.12.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Select PPPoE option policy mode.
| |||||||||||||||||||||
| Nqos | 1.3.6.1.4.1.890.1.5.13.13.13 | ||||||||||||||||||||
| SqosAtmVcShapingEnable | 1.3.6.1.4.1.890.1.5.13.13.13.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/Disable per-VC shaping for ATM VC.
| |||||||||||||||||||||
| SqosMaxNumOfShapingProfiles | 1.3.6.1.4.1.890.1.5.13.13.13.2 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The maximum number of shaping profiles supported by the system. | |||||||||||||||||||||
| TqosShapingProfileTable | 1.3.6.1.4.1.890.1.5.13.13.13.3 | NA | |||||||||||||||||||
table · not-accessible · current Configures shaping profiles. | |||||||||||||||||||||
| RqosShapingProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.13.3.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CqosShapingProfileName | 1.3.6.1.4.1.890.1.5.13.13.13.3.1.1 | DisplayString (SIZE (1..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (1..31)) · read-only · current Profile name | |||||||||||||||||||||
| CqosShapingProfileQueue7Rate | 1.3.6.1.4.1.890.1.5.13.13.13.3.1.2 | INTEGER (0..10000000) | RC | ||||||||||||||||||
column · INTEGER (0..10000000) · read-create · current The guarenteed minumun bandwidth of queue 7.
| |||||||||||||||||||||
| CqosShapingProfileQueue6Rate | 1.3.6.1.4.1.890.1.5.13.13.13.3.1.3 | INTEGER (0..10000000) | RC | ||||||||||||||||||
column · INTEGER (0..10000000) · read-create · current The guarenteed minumun bandwidth of queue 6.
| |||||||||||||||||||||
| CqosShapingProfileQueue5Rate | 1.3.6.1.4.1.890.1.5.13.13.13.3.1.4 | INTEGER (0..10000000) | RC | ||||||||||||||||||
column · INTEGER (0..10000000) · read-create · current The guarenteed minumun bandwidth of queue 5.
| |||||||||||||||||||||
| CqosShapingProfileQueue4Rate | 1.3.6.1.4.1.890.1.5.13.13.13.3.1.5 | INTEGER (0..10000000) | RC | ||||||||||||||||||
column · INTEGER (0..10000000) · read-create · current The guarenteed minumun bandwidth of queue 4.
| |||||||||||||||||||||
| CqosShapingProfileQueue3Rate | 1.3.6.1.4.1.890.1.5.13.13.13.3.1.6 | INTEGER (0..10000000) | RC | ||||||||||||||||||
column · INTEGER (0..10000000) · read-create · current The guarenteed minumun bandwidth of queue 3.
| |||||||||||||||||||||
| CqosShapingProfileQueue2Rate | 1.3.6.1.4.1.890.1.5.13.13.13.3.1.7 | INTEGER (0..10000000) | RC | ||||||||||||||||||
column · INTEGER (0..10000000) · read-create · current The guarenteed minumun bandwidth of queue 2.
| |||||||||||||||||||||
| CqosShapingProfileQueue1Rate | 1.3.6.1.4.1.890.1.5.13.13.13.3.1.8 | INTEGER (0..10000000) | RC | ||||||||||||||||||
column · INTEGER (0..10000000) · read-create · current The guarenteed minumun bandwidth of queue 1.
| |||||||||||||||||||||
| CqosShapingProfileQueue0Rate | 1.3.6.1.4.1.890.1.5.13.13.13.3.1.9 | INTEGER (0..10000000) | RC | ||||||||||||||||||
column · INTEGER (0..10000000) · read-create · current The guarenteed minumun bandwidth of queue 0.
| |||||||||||||||||||||
| CqosShapingProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.13.3.1.18 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| SqosMaxNumOfVcShapingProfiles | 1.3.6.1.4.1.890.1.5.13.13.13.6 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The maximum number of VC shaping profiles supported by the system. | |||||||||||||||||||||
| TqosVcShapingProfileTable | 1.3.6.1.4.1.890.1.5.13.13.13.7 | NA | |||||||||||||||||||
table · not-accessible · current Configures ATM shaping profiles. | |||||||||||||||||||||
| RqosVcShapingProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.13.7.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CqosVcShapingProfileName | 1.3.6.1.4.1.890.1.5.13.13.13.7.1.1 | DisplayString (SIZE (1..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (1..31)) · read-only · current Profile name | |||||||||||||||||||||
| CqosVcShapingProfileMaxRate | 1.3.6.1.4.1.890.1.5.13.13.13.7.1.2 | INTEGER (32..100000) | RC | ||||||||||||||||||
column · INTEGER (32..100000) · read-create · current The max rate of VC shaping profile.
| |||||||||||||||||||||
| CqosVcShapingProfileQueueDepth | 1.3.6.1.4.1.890.1.5.13.13.13.7.1.3 | INTEGER (30..255) | RC | ||||||||||||||||||
column · INTEGER (30..255) · read-create · current The queue depth of VC shaping profile. | |||||||||||||||||||||
| CqosVcShapingProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.13.7.1.4 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| TqosPortConfTable | 1.3.6.1.4.1.890.1.5.13.13.13.8 | NA | |||||||||||||||||||
table · not-accessible · current Configures referenced QoS algorithm and QoS profile to UNI ports | |||||||||||||||||||||
| RqosPortConfEntry | 1.3.6.1.4.1.890.1.5.13.13.13.8.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CqosPortConfShapingProfile | 1.3.6.1.4.1.890.1.5.13.13.13.8.1.1 | DisplayString (SIZE (1..31)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (1..31)) · read-write · current Configures shaping profile on specified UNI port. | |||||||||||||||||||||
| CqosPortConfAlgorithm | 1.3.6.1.4.1.890.1.5.13.13.13.8.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures QoS algorithm on specified UNI port.
| |||||||||||||||||||||
| CqosPortConfWeightProfile | 1.3.6.1.4.1.890.1.5.13.13.13.8.1.5 | DisplayString (SIZE (1..31)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (1..31)) · read-write · current Configures wrr/wfq profile on specified UNI port. | |||||||||||||||||||||
| CqosPortConfRateLimitProfile | 1.3.6.1.4.1.890.1.5.13.13.13.8.1.6 | DisplayString (SIZE (1..31)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (1..31)) · read-write · current Configures Rate limit profile on specified UNI port. | |||||||||||||||||||||
| CqosPortConfHybridspq | 1.3.6.1.4.1.890.1.5.13.13.13.8.1.9 | INTEGER (0..7) | RW | ||||||||||||||||||
column · INTEGER (0..7) · read-write · current Configures Hybrid-Spq on specified UNI port. | |||||||||||||||||||||
| TqosVcConfTable | 1.3.6.1.4.1.890.1.5.13.13.13.9 | NA | |||||||||||||||||||
| RqosVcConfEntry | 1.3.6.1.4.1.890.1.5.13.13.13.9.1 | NA | |||||||||||||||||||
| CqosVcConfShapingProfile | 1.3.6.1.4.1.890.1.5.13.13.13.9.1.1 | DisplayString (SIZE (1..31)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (1..31)) · read-write · current Configures ATM shaping profile on specified ATM VC. | |||||||||||||||||||||
| NqueueMapping | 1.3.6.1.4.1.890.1.5.13.13.13.10 | ||||||||||||||||||||
| SqueueMappingPbit7QueueId | 1.3.6.1.4.1.890.1.5.13.13.13.10.1 | INTEGER (0..7) | RW | ||||||||||||||||||
scalar · INTEGER (0..7) · read-write · current Configures pbit 7 mapping to specified queue ID. | |||||||||||||||||||||
| SqueueMappingPbit6QueueId | 1.3.6.1.4.1.890.1.5.13.13.13.10.2 | INTEGER (0..7) | RW | ||||||||||||||||||
scalar · INTEGER (0..7) · read-write · current Configures pbit 6 mapping to specified queue ID. | |||||||||||||||||||||
| SqueueMappingPbit5QueueId | 1.3.6.1.4.1.890.1.5.13.13.13.10.3 | INTEGER (0..7) | RW | ||||||||||||||||||
scalar · INTEGER (0..7) · read-write · current Configures pbit 5 mapping to specified queue ID. | |||||||||||||||||||||
| SqueueMappingPbit4QueueId | 1.3.6.1.4.1.890.1.5.13.13.13.10.4 | INTEGER (0..7) | RW | ||||||||||||||||||
scalar · INTEGER (0..7) · read-write · current Configures pbit 4 mapping to specified queue ID. | |||||||||||||||||||||
| SqueueMappingPbit3QueueId | 1.3.6.1.4.1.890.1.5.13.13.13.10.5 | INTEGER (0..7) | RW | ||||||||||||||||||
scalar · INTEGER (0..7) · read-write · current Configures pbit 3 mapping to specified queue ID. | |||||||||||||||||||||
| SqueueMappingPbit2QueueId | 1.3.6.1.4.1.890.1.5.13.13.13.10.6 | INTEGER (0..7) | RW | ||||||||||||||||||
scalar · INTEGER (0..7) · read-write · current Configures pbit 2 mapping to specified queue ID. | |||||||||||||||||||||
| SqueueMappingPbit1QueueId | 1.3.6.1.4.1.890.1.5.13.13.13.10.7 | INTEGER (0..7) | RW | ||||||||||||||||||
scalar · INTEGER (0..7) · read-write · current Configures pbit 1 mapping to specified queue ID. | |||||||||||||||||||||
| SqueueMappingPbit0QueueId | 1.3.6.1.4.1.890.1.5.13.13.13.10.8 | INTEGER (0..7) | RW | ||||||||||||||||||
scalar · INTEGER (0..7) · read-write · current Configures pbit 0 mapping to specified queue ID. | |||||||||||||||||||||
| Ndscp | 1.3.6.1.4.1.890.1.5.13.13.13.11 | ||||||||||||||||||||
| TdscpMappingTable | 1.3.6.1.4.1.890.1.5.13.13.13.11.1 | NA | |||||||||||||||||||
table · not-accessible · current The table contains DSCP mapping configuration. | |||||||||||||||||||||
| RdscpMappingEntry | 1.3.6.1.4.1.890.1.5.13.13.13.11.1.1 | NA | |||||||||||||||||||
| CdscpSrcCodePoint | 1.3.6.1.4.1.890.1.5.13.13.13.11.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The DSCP source code point used for mapping. | |||||||||||||||||||||
| CdscpMapPriority | 1.3.6.1.4.1.890.1.5.13.13.13.11.1.1.2 | INTEGER (0..7) | RW | ||||||||||||||||||
column · INTEGER (0..7) · read-write · current The mapping p bits that will replace the source p bits in the incoming packet. | |||||||||||||||||||||
| TdscpPortTable | 1.3.6.1.4.1.890.1.5.13.13.13.11.2 | NA | |||||||||||||||||||
table · not-accessible · current The table contains DSCP mapping configuration for the xDSL and ethernet ports. | |||||||||||||||||||||
| RdscpPortEntry | 1.3.6.1.4.1.890.1.5.13.13.13.11.2.1 | NA | |||||||||||||||||||
| CdscpStatusEnable | 1.3.6.1.4.1.890.1.5.13.13.13.11.2.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The DSCP port status.
| |||||||||||||||||||||
| SqosMaxNumOfWeightProfiles | 1.3.6.1.4.1.890.1.5.13.13.13.12 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The maximum number of WRR/WFQ profiles supported by the system. | |||||||||||||||||||||
| TqosWeightProfileTable | 1.3.6.1.4.1.890.1.5.13.13.13.13 | NA | |||||||||||||||||||
table · not-accessible · current Configures wrr/wfq profiles. | |||||||||||||||||||||
| RqosWeightProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.13.13.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CqosWeightProfileName | 1.3.6.1.4.1.890.1.5.13.13.13.13.1.1 | DisplayString (SIZE (1..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (1..31)) · read-only · current Name of WRR/WFG profile. This is a table index. | |||||||||||||||||||||
| CqosWeightProfileQueue7Weight | 1.3.6.1.4.1.890.1.5.13.13.13.13.1.2 | INTEGER (0..50) | RC | ||||||||||||||||||
column · INTEGER (0..50) · read-create · current The weight setting of queue 7, use 0 to specify SP mode. For VLC, 0 is equal to 1 because VLC not support SP+Weight algorithm. | |||||||||||||||||||||
| CqosWeightProfileQueue6Weight | 1.3.6.1.4.1.890.1.5.13.13.13.13.1.3 | INTEGER (0..50) | RC | ||||||||||||||||||
column · INTEGER (0..50) · read-create · current The weight setting of queue 6, use 0 to specify SP mode. For VLC, 0 is equal to 1 because VLC not support SP+Weight algorithm. | |||||||||||||||||||||
| CqosWeightProfileQueue5Weight | 1.3.6.1.4.1.890.1.5.13.13.13.13.1.4 | INTEGER (0..50) | RC | ||||||||||||||||||
column · INTEGER (0..50) · read-create · current The weight setting of queue 5, use 0 to specify SP mode. For VLC, 0 is equal to 1 because VLC not support SP+Weight algorithm. | |||||||||||||||||||||
| CqosWeightProfileQueue4Weight | 1.3.6.1.4.1.890.1.5.13.13.13.13.1.5 | INTEGER (0..50) | RC | ||||||||||||||||||
column · INTEGER (0..50) · read-create · current The weight setting of queue 4, use 0 to specify SP mode. For VLC, 0 is equal to 1 because VLC not support SP+Weight algorithm. | |||||||||||||||||||||
| CqosWeightProfileQueue3Weight | 1.3.6.1.4.1.890.1.5.13.13.13.13.1.6 | INTEGER (0..50) | RC | ||||||||||||||||||
column · INTEGER (0..50) · read-create · current The weight setting of queue 3, use 0 to specify SP mode. For VLC, 0 is equal to 1 because VLC not support SP+Weight algorithm. | |||||||||||||||||||||
| CqosWeightProfileQueue2Weight | 1.3.6.1.4.1.890.1.5.13.13.13.13.1.7 | INTEGER (0..50) | RC | ||||||||||||||||||
column · INTEGER (0..50) · read-create · current The weight setting of queue 2, use 0 to specify SP mode. For VLC, 0 is equal to 1 because VLC not support SP+Weight algorithm. | |||||||||||||||||||||
| CqosWeightProfileQueue1Weight | 1.3.6.1.4.1.890.1.5.13.13.13.13.1.8 | INTEGER (0..50) | RC | ||||||||||||||||||
column · INTEGER (0..50) · read-create · current The weight setting of queue 1, use 0 to specify SP mode. For VLC, 0 is equal to 1 because VLC not support SP+Weight algorithm. | |||||||||||||||||||||
| CqosWeightProfileQueue0Weight | 1.3.6.1.4.1.890.1.5.13.13.13.13.1.9 | INTEGER (0..50) | RC | ||||||||||||||||||
column · INTEGER (0..50) · read-create · current The weight setting of queue 0, use 0 to specify SP mode. For VLC, 0 is equal to 1 because VLC not support SP+Weight algorithm. | |||||||||||||||||||||
| CqosWeightProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.13.13.1.18 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| SqosMaxNumOfRateLimitProfiles | 1.3.6.1.4.1.890.1.5.13.13.13.14 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The maximum number of ratelimit profiles supported by the system. | |||||||||||||||||||||
| TqosRatelimitProfileTable | 1.3.6.1.4.1.890.1.5.13.13.13.15 | NA | |||||||||||||||||||
table · not-accessible · current Configures rate limit profiles. | |||||||||||||||||||||
| RqosRatelimitProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.13.15.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CqosRatelimitProfileName | 1.3.6.1.4.1.890.1.5.13.13.13.15.1.1 | DisplayString (SIZE (1..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (1..31)) · read-only · current Name of ratelimit profile. This is a table index. | |||||||||||||||||||||
| CqosRatelimitProfileIngressCIR | 1.3.6.1.4.1.890.1.5.13.13.13.15.1.2 | INTEGER (64..10000000) | RC | ||||||||||||||||||
column · INTEGER (64..10000000) · read-create · current Ingress CIR threshold of this rate limit profile. Unit is Kbps(minimum scale is 64 Kbps. If value is not a multiple of 64, a nearly value is applied.) | |||||||||||||||||||||
| CqosRatelimitProfileIngressCBS | 1.3.6.1.4.1.890.1.5.13.13.13.15.1.3 | INTEGER (64..16000000) | RC | ||||||||||||||||||
column · INTEGER (64..16000000) · read-create · current Ingress CBS threshold of this rate limit profile. Unit is Kbits(minimum scale is 64 Kbits. If value is not a multiple of 64, a nearly value is applied.) | |||||||||||||||||||||
| CqosRatelimitProfileIngressEIR | 1.3.6.1.4.1.890.1.5.13.13.13.15.1.4 | INTEGER (0..10000000) | RC | ||||||||||||||||||
column · INTEGER (0..10000000) · read-create · current Ingress EIR threshold of this rate limit profile. Unit is Kbps(minimum scale is 64 Kbps. If value is not a multiple of 64, a nearly value is applied.) | |||||||||||||||||||||
| CqosRatelimitProfileIngressEBS | 1.3.6.1.4.1.890.1.5.13.13.13.15.1.5 | INTEGER (0..16000000) | RC | ||||||||||||||||||
column · INTEGER (0..16000000) · read-create · current Ingress EBS threshold of this rate limit profile. Unit is Kbits(minimum scale is 64 Kbits. If value is not a multiple of 64, a nearly value is applied.) | |||||||||||||||||||||
| CqosRatelimitProfileIngressActive | 1.3.6.1.4.1.890.1.5.13.13.13.15.1.7 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current Enable/disable ingress rate limit.
| |||||||||||||||||||||
| CqosRatelimitProfileEgressRate | 1.3.6.1.4.1.890.1.5.13.13.13.15.1.8 | INTEGER (64..10000000) | RC | ||||||||||||||||||
column · INTEGER (64..10000000) · read-create · current Egress Rate of this rate limit profile. Unit is Kbps(minimum scale is 64 Kbps. If value is not a multiple of 64, a nearly value is applied.) | |||||||||||||||||||||
| CqosRatelimitProfileEgressBurst | 1.3.6.1.4.1.890.1.5.13.13.13.15.1.9 | INTEGER (32..128000) | RC | ||||||||||||||||||
column · INTEGER (32..128000) · read-create · current Egress Burst of this rate limit profile. Unit is Kbits(minimum scale is 32 Kbits. If value is not a multiple of 32, a nearly value is applied.) | |||||||||||||||||||||
| CqosRatelimitProfileEgressActive | 1.3.6.1.4.1.890.1.5.13.13.13.15.1.10 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current Enable/disable egress rate limit.
| |||||||||||||||||||||
| CqosRatelimitProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.13.15.1.11 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| Nservice | 1.3.6.1.4.1.890.1.5.13.13.14 | ||||||||||||||||||||
| TaccessCtrlTable | 1.3.6.1.4.1.890.1.5.13.13.14.1 | NA | |||||||||||||||||||
table · not-accessible · current A table that contains information about service access control. | |||||||||||||||||||||
| RaccessCtrlEntry | 1.3.6.1.4.1.890.1.5.13.13.14.1.1 | NA | |||||||||||||||||||
| CaccessCtrlService | 1.3.6.1.4.1.890.1.5.13.13.14.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The service type of the access control entry.
| |||||||||||||||||||||
| CaccessCtrlEnable | 1.3.6.1.4.1.890.1.5.13.13.14.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable/disable the service.
| |||||||||||||||||||||
| CaccessCtrlPort | 1.3.6.1.4.1.890.1.5.13.13.14.1.1.3 | INTEGER (1..65535) | RW | ||||||||||||||||||
column · INTEGER (1..65535) · read-write · current The port number which the service uses. | |||||||||||||||||||||
| TsecuredClientIpTable | 1.3.6.1.4.1.890.1.5.13.13.14.2 | NA | |||||||||||||||||||
table · not-accessible · current A table that contains information about IPv4 secured clients. | |||||||||||||||||||||
| RsecuredClientIpEntry | 1.3.6.1.4.1.890.1.5.13.13.14.2.1 | NA | |||||||||||||||||||
| CsecuredClientIpIndex | 1.3.6.1.4.1.890.1.5.13.13.14.2.1.1 | INTEGER (1..16) | RO | ||||||||||||||||||
column · INTEGER (1..16) · read-only · current The index of the entry. | |||||||||||||||||||||
| CsecuredClientIpStartIpAddress | 1.3.6.1.4.1.890.1.5.13.13.14.2.1.2 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The start IP address (0.0.0.0 ~ 223.255.255.255) of the secured client settings. | |||||||||||||||||||||
| CsecuredClientIpEndIpAddress | 1.3.6.1.4.1.890.1.5.13.13.14.2.1.3 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The end IP address (0.0.0.0 ~ 223.255.255.255) of the secured client settings. | |||||||||||||||||||||
| CsecuredClientIpService | 1.3.6.1.4.1.890.1.5.13.13.14.2.1.4 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current Each bit corresponds to a service. The bit is settings to 1 if the service is enabled, and settings to 0 if the service is disabled. The various bit positions are: BIT 0: icmp BIT 1: telnet BIT 2: ftp BIT 3: snmp BIT 4: web BIT 5: https BIT 6: ssh
| |||||||||||||||||||||
| CsecuredClientIpEnable | 1.3.6.1.4.1.890.1.5.13.13.14.2.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable/disable the entry.
| |||||||||||||||||||||
| TsecuredClientIpv6Table | 1.3.6.1.4.1.890.1.5.13.13.14.3 | NA | |||||||||||||||||||
table · not-accessible · current A table that contains information about IPv6 secured clients. | |||||||||||||||||||||
| RsecuredClientIpv6Entry | 1.3.6.1.4.1.890.1.5.13.13.14.3.1 | NA | |||||||||||||||||||
| CsecuredClientIpv6Index | 1.3.6.1.4.1.890.1.5.13.13.14.3.1.1 | INTEGER (1..16) | RO | ||||||||||||||||||
column · INTEGER (1..16) · read-only · current The index of the entry. | |||||||||||||||||||||
| CsecuredClientIpv6IpAddress | 1.3.6.1.4.1.890.1.5.13.13.14.3.1.2 | InetAddress | RW | ||||||||||||||||||
column · InetAddress · read-write · current The IP address (:: ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff) of the IPv6 secured client settings. | |||||||||||||||||||||
| CsecuredClientIpv6IpMask | 1.3.6.1.4.1.890.1.5.13.13.14.3.1.3 | INTEGER (0..128) | RW | ||||||||||||||||||
column · INTEGER (0..128) · read-write · current The Mask of the IPv6 secured client settings. | |||||||||||||||||||||
| CsecuredClientIpv6Service | 1.3.6.1.4.1.890.1.5.13.13.14.3.1.4 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current Each bit corresponds to a service. The bit is settings to 1 if the service is enabled, and settings to 0 if the service is disabled. The various bit positions are: BIT 0: icmp BIT 1: telnet BIT 2: ftp BIT 3: snmp BIT 4: web BIT 5: https BIT 6: ssh
| |||||||||||||||||||||
| CsecuredClientIpv6Enable | 1.3.6.1.4.1.890.1.5.13.13.14.3.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable/disable the entry.
| |||||||||||||||||||||
| Nsnmp | 1.3.6.1.4.1.890.1.5.13.13.15 | ||||||||||||||||||||
| TsnmpTrapDestTable | 1.3.6.1.4.1.890.1.5.13.13.15.1 | NA | |||||||||||||||||||
table · not-accessible · current Sets the IP addresses of up to four SNMP managers (stations to send your SNMP traps to). You can configure up to four managers. | |||||||||||||||||||||
| RsnmpTrapDestEntry | 1.3.6.1.4.1.890.1.5.13.13.15.1.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CsnmpTrapDestIndex | 1.3.6.1.4.1.890.1.5.13.13.15.1.1.1 | INTEGER (1..4) | RO | ||||||||||||||||||
column · INTEGER (1..4) · read-only · current index (1..4) of the trap destination table | |||||||||||||||||||||
| CsnmpTrapDestIpAddressType | 1.3.6.1.4.1.890.1.5.13.13.15.1.1.2 | InetAddressType | RW | ||||||||||||||||||
column · InetAddressType · read-write · current SNMP trap destination IP address type
| |||||||||||||||||||||
| CsnmpTrapDestIpAddress | 1.3.6.1.4.1.890.1.5.13.13.15.1.1.3 | InetAddress | RW | ||||||||||||||||||
column · InetAddress · read-write · current SNMP trap destination IP address <ipv4-address> 0.0.0.0 ~ 223.255.255.255 <ipv6-address> ::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff ipv4 address input format: # 0x00 0x00 0x00 0x00 ipv6 address input format: # 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Limit: snmpTrapDestIpAddressType must be set before snmpTrapDestIpAddress. | |||||||||||||||||||||
| CsnmpTrapDestUdpPort | 1.3.6.1.4.1.890.1.5.13.13.15.1.1.4 | INTEGER (1..65535) | RW | ||||||||||||||||||
column · INTEGER (1..65535) · read-write · current SNMP manager UDP port. | |||||||||||||||||||||
| CsnmpTrapDestVersion | 1.3.6.1.4.1.890.1.5.13.13.15.1.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current SNMP version.
| |||||||||||||||||||||
| CsnmpTrapDestUserName | 1.3.6.1.4.1.890.1.5.13.13.15.1.1.6 | DisplayString (SIZE (0..31)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..31)) · read-write · current Must match an existing account on the Switch. | |||||||||||||||||||||
| SsnmpGetCommunity | 1.3.6.1.4.1.890.1.5.13.13.15.2 | DisplayString (SIZE (0..127)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..127)) · read-write · current Sets the get community. Only for SNMPv2c or lower. | |||||||||||||||||||||
| SsnmpSetCommunity | 1.3.6.1.4.1.890.1.5.13.13.15.3 | DisplayString (SIZE (0..127)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..127)) · read-write · current Sets the set community. Only for SNMPv2c or lower. | |||||||||||||||||||||
| SsnmpTrapCommunity | 1.3.6.1.4.1.890.1.5.13.13.15.4 | DisplayString (SIZE (0..127)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..127)) · read-write · current Sets the trap community. Only for SNMPv2c or lower. | |||||||||||||||||||||
| TsnmpUserTable | 1.3.6.1.4.1.890.1.5.13.13.15.5 | NA | |||||||||||||||||||
table · not-accessible · current Sets the authentication level for SNMP v3 user authentication. Optionally, specifies the authentication and encryption methods for communication with the SNMP manager. | |||||||||||||||||||||
| RsnmpUserEntry | 1.3.6.1.4.1.890.1.5.13.13.15.5.1 | NA | |||||||||||||||||||
| CsnmpUserName | 1.3.6.1.4.1.890.1.5.13.13.15.5.1.1 | DisplayString (SIZE (1..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (1..31)) · read-only · current User name | |||||||||||||||||||||
| CsnmpUserSecurityLevel | 1.3.6.1.4.1.890.1.5.13.13.15.5.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current noauth: Use the username as the password string sent to the SNMP manager. This is equivalent to the Get, Set and Trap Community in SNMP v2c. This is the lowest security level. auth: Implement an authentication algorithm for SNMP messages sent by this user. priv: Implement authentication and encryption for SNMP messages sent by this user. This is the highest security level.
| |||||||||||||||||||||
| CsnmpUserAuthProtocol | 1.3.6.1.4.1.890.1.5.13.13.15.5.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Specify MD5 or SHA authentication algorithm.
| |||||||||||||||||||||
| CsnmpUserPrivProtocol | 1.3.6.1.4.1.890.1.5.13.13.15.5.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Specify DES or AES encryption algorithm.
| |||||||||||||||||||||
| SsnmpVersion | 1.3.6.1.4.1.890.1.5.13.13.15.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Sets the SNMP version to use for communication with the SNMP manager.
| |||||||||||||||||||||
| Nsys | 1.3.6.1.4.1.890.1.5.13.13.16 | ||||||||||||||||||||
| SsysBootupFwVersion | 1.3.6.1.4.1.890.1.5.13.13.16.1 | DisplayString | RO | V1.08(ABGX.0) | |||||||||||||||||
scalar · DisplayString · read-only · current Display the version of the running firmware. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SsysImage1FwVersion | 1.3.6.1.4.1.890.1.5.13.13.16.2 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current Display the firmware version of image1 which was installed at first partition of the flash memory. | |||||||||||||||||||||
| SsysImage2FwVersion | 1.3.6.1.4.1.890.1.5.13.13.16.3 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current Display the firmware version of image2 which was installed at second partition of the flash memory. | |||||||||||||||||||||
| SsysBootupImage | 1.3.6.1.4.1.890.1.5.13.13.16.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Current firmware image which was used for system boot up.
| |||||||||||||||||||||
| SsysBootupConfig | 1.3.6.1.4.1.890.1.5.13.13.16.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Current configuration file the system booted up.
| |||||||||||||||||||||
| NsysOps | 1.3.6.1.4.1.890.1.5.13.13.16.6 | ||||||||||||||||||||
| SsysTarget | 1.3.6.1.4.1.890.1.5.13.13.16.6.1 | PortList | RW | ||||||||||||||||||
scalar · PortList · read-write · current Specifies target interface ifIndex for sysOperation. 0 - represent the system, others: same as ifIndex definition 10000: represent slot 1 system 20000: represent slot 2 system 40000: represent slot 4 system 50000: represent slot 5 system 60000: represent slot 6 system | |||||||||||||||||||||
| SsysOperation | 1.3.6.1.4.1.890.1.5.13.13.16.6.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The agent will reset the object's value to zero when the operation is done. resetByIntf(1) - applicable to ifIndex. saveConfigToBootConfig(2), saveConfigToConfig1(3), saveConfigToConfig2(4), loadFactoryDefault(5) - resets all config excluding management related settings. loadFactoryDefaultByIntf(6) - applicable to ifIndex. rebootSystem(7) - reboot the target system, unable to reboot target system when firmware upgrade is not ready. loadFactoryDefaultAll(8) - resets all config.
| |||||||||||||||||||||
| SsysRebootCountdownTime | 1.3.6.1.4.1.890.1.5.13.13.16.6.3 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current system reboot with specified time, the value 0 is set to cancel the operation, unable to set when line card firmware upgrade is not ready | |||||||||||||||||||||
| NsysTimeSetup | 1.3.6.1.4.1.890.1.5.13.13.16.7 | ||||||||||||||||||||
| SsysTimeServerMode | 1.3.6.1.4.1.890.1.5.13.13.16.7.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The mechanism of Time Server when the system boots up.
| |||||||||||||||||||||
| SsysTimeServerIPType | 1.3.6.1.4.1.890.1.5.13.13.16.7.2 | InetAddressType | RW | ||||||||||||||||||
scalar · InetAddressType · read-write · current The IP Address type
| |||||||||||||||||||||
| SsysTimeServerIP | 1.3.6.1.4.1.890.1.5.13.13.16.7.3 | InetAddress | RW | ||||||||||||||||||
scalar · InetAddress · read-write · current The IP Address of Time Server | |||||||||||||||||||||
| SsysTimeSystemTime | 1.3.6.1.4.1.890.1.5.13.13.16.7.4 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current The system time in hh/mm/ss format hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59 | |||||||||||||||||||||
| SsysTimeSystemDate | 1.3.6.1.4.1.890.1.5.13.13.16.7.5 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current The system date in mm/dd/yyyy format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 | |||||||||||||||||||||
| SsysTimeSystemTimeZone | 1.3.6.1.4.1.890.1.5.13.13.16.7.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The system time zone
| |||||||||||||||||||||
| SsysTimeServerSynchronize | 1.3.6.1.4.1.890.1.5.13.13.16.7.7 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Synchronize current system time with time server
| |||||||||||||||||||||
| SsysTimeDaylightSaveEnable | 1.3.6.1.4.1.890.1.5.13.13.16.7.8 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables/Disables daylight saving on the Switch.
| |||||||||||||||||||||
| SsysTimeDaylightSaveStartDateWeek | 1.3.6.1.4.1.890.1.5.13.13.16.7.9 | INTEGER (1..5) | RW | ||||||||||||||||||
scalar · INTEGER (1..5) · read-write · current Configures daylight saving start-date week. | |||||||||||||||||||||
| SsysTimeDaylightSaveStartDateDay | 1.3.6.1.4.1.890.1.5.13.13.16.7.10 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Configures daylight saving start-date day.
| |||||||||||||||||||||
| SsysTimeDaylightSaveStartDateMonth | 1.3.6.1.4.1.890.1.5.13.13.16.7.11 | INTEGER (1..12) | RW | ||||||||||||||||||
scalar · INTEGER (1..12) · read-write · current Configures daylight saving start-date month. | |||||||||||||||||||||
| SsysTimeDaylightSaveStartDateClock | 1.3.6.1.4.1.890.1.5.13.13.16.7.12 | INTEGER (0..23) | RW | ||||||||||||||||||
scalar · INTEGER (0..23) · read-write · current Configures daylight saving start-date o'clock. | |||||||||||||||||||||
| SsysTimeDaylightSaveEndDateWeek | 1.3.6.1.4.1.890.1.5.13.13.16.7.13 | INTEGER (1..5) | RW | ||||||||||||||||||
scalar · INTEGER (1..5) · read-write · current Configures daylight saving end-date week. | |||||||||||||||||||||
| SsysTimeDaylightSaveEndDateDay | 1.3.6.1.4.1.890.1.5.13.13.16.7.14 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Configures daylight saving end-date day.
| |||||||||||||||||||||
| SsysTimeDaylightSaveEndDateMonth | 1.3.6.1.4.1.890.1.5.13.13.16.7.15 | INTEGER (1..12) | RW | ||||||||||||||||||
scalar · INTEGER (1..12) · read-write · current Configures daylight saving end-date month. | |||||||||||||||||||||
| SsysTimeDaylightSaveEndDateClock | 1.3.6.1.4.1.890.1.5.13.13.16.7.16 | INTEGER (0..23) | RW | ||||||||||||||||||
scalar · INTEGER (0..23) · read-write · current Configures daylight saving end-date o'clock. | |||||||||||||||||||||
| SsysTimeServerLastSynchronizeStatus | 1.3.6.1.4.1.890.1.5.13.13.16.7.17 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The status of the last synchronization with time server
| |||||||||||||||||||||
| SsysTimeServerLastSynchronizeTime | 1.3.6.1.4.1.890.1.5.13.13.16.7.18 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current Last time synchronization with time server | |||||||||||||||||||||
| NsysFwUpgrade | 1.3.6.1.4.1.890.1.5.13.13.16.10 | ||||||||||||||||||||
| SsysFwUpgradeStatus | 1.3.6.1.4.1.890.1.5.13.13.16.10.3 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Device returns swDownloading(1) - if the downloading process is on going. Device returns swDownloadedSuccessfully(2) - if the downloading process is successfully. Device returns swDownloadedTimeout(3) - if the downloading process is timeout. Device returns swImageFileError(4) - if the downloaded image file has error CRC. Device returns swInstalling(5) - if the downloaded image file is installing (EAN is restarting). Device returns swInstallingError(6) - if EAN failed to installing downloaded image file. Device returns swInstallSuccessfully(7) - if EAN installed downloaded image file successfully. Device returns swRestoreSuccessfully(8) - if EAN restored SW successfully. Device returns swRevertSuccessfully(9) - if EAN reverted to old SW successfully. Device returns idle(10) - if EAN didn't get any SW downloading command after system booted up. Device returns unKnownError(11) - if the installing process is terminated due to NE restart by unknown reason
| |||||||||||||||||||||
| NsysProductData | 1.3.6.1.4.1.890.1.5.13.13.16.12 | ||||||||||||||||||||
| SsysProductName | 1.3.6.1.4.1.890.1.5.13.13.16.12.1 | DisplayString (SIZE (0..20)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (0..20)) · read-only · current The product name is 'IES5206' by default. | |||||||||||||||||||||
| SsysProductDescr | 1.3.6.1.4.1.890.1.5.13.13.16.12.2 | DisplayString (SIZE (0..32)) | RO | IES5206 MSC | |||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-only · current The brief description of the product. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SsysProductNumber | 1.3.6.1.4.1.890.1.5.13.13.16.12.3 | DisplayString (SIZE (0..24)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (0..24)) · read-only · current The product number for IES5206 | |||||||||||||||||||||
| SsysProductRevision | 1.3.6.1.4.1.890.1.5.13.13.16.12.4 | DisplayString (SIZE (0..13)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (0..13)) · read-only · current The product number is for example 'R1A', 'R1B', 'R2A', etc. according to product development and assignment. | |||||||||||||||||||||
| SsysSerialNumber | 1.3.6.1.4.1.890.1.5.13.13.16.12.5 | DisplayString (SIZE (3..31)) | RO | S170Z34010399 | |||||||||||||||||
scalar · DisplayString (SIZE (3..31)) · read-only · current The product number assigned during manufacturing process. Serial number is in the format <factory code><7 digit decimal number>, e.g. 'Axx0001234'. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SsysManufacturingDate | 1.3.6.1.4.1.890.1.5.13.13.16.12.6 | DisplayString (SIZE (8)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (8)) · read-only · current The product maunfacturing date in format of '<YYYY><MM><DD>, e.g. '20120611'. <YYYY> - 2012~ .... <MM> - 01~12 <DD> - 01~31 | |||||||||||||||||||||
| Naaa | 1.3.6.1.4.1.890.1.5.13.13.16.15 | ||||||||||||||||||||
| Nauthen | 1.3.6.1.4.1.890.1.5.13.13.16.15.1 | ||||||||||||||||||||
| SloginMethod1 | 1.3.6.1.4.1.890.1.5.13.13.16.15.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The first method of login authentication
| |||||||||||||||||||||
| SloginMethod2 | 1.3.6.1.4.1.890.1.5.13.13.16.15.1.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The second method of enable authentication.
| |||||||||||||||||||||
| SloginMethod3 | 1.3.6.1.4.1.890.1.5.13.13.16.15.1.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The third method of enable authentication.
| |||||||||||||||||||||
| SenableMethod1 | 1.3.6.1.4.1.890.1.5.13.13.16.15.1.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The first method of enable authentication.
| |||||||||||||||||||||
| SenableMethod2 | 1.3.6.1.4.1.890.1.5.13.13.16.15.1.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The second method of enable authentication.
| |||||||||||||||||||||
| SenableTryContinue | 1.3.6.1.4.1.890.1.5.13.13.16.15.1.6 | EnabledStatus | RW | ||||||||||||||||||
scalar · EnabledStatus · read-write · current Enable: The system will still try next enable method even the current one method return failed by authentication. Disable: The system will only try next enable method while timeout. | |||||||||||||||||||||
| SloginTryContinue | 1.3.6.1.4.1.890.1.5.13.13.16.15.1.7 | EnabledStatus | RW | ||||||||||||||||||
scalar · EnabledStatus · read-write · current Enable: The system will still try next login method even the current one method return failed by authentication. Disable: The system will only try next login method while timeout. | |||||||||||||||||||||
| Nacct | 1.3.6.1.4.1.890.1.5.13.13.16.15.2 | ||||||||||||||||||||
| SsystemMethod | 1.3.6.1.4.1.890.1.5.13.13.16.15.2.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current set the accounting method for system level recording
| |||||||||||||||||||||
| SexecMethod | 1.3.6.1.4.1.890.1.5.13.13.16.15.2.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current set the accounting method for exec level accounting.
| |||||||||||||||||||||
| SexecMode | 1.3.6.1.4.1.890.1.5.13.13.16.15.2.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current set the update mode for exec level accounting. start-stop: Send start, stop event to server during administrator log in and log out the shell, and periodically update the session status to server. stop-only: Send only stop event to server when the administrator ends the session.
| |||||||||||||||||||||
| ScommandsPrivilege | 1.3.6.1.4.1.890.1.5.13.13.16.15.2.4 | INTEGER (0..14) | RW | ||||||||||||||||||
scalar · INTEGER (0..14) · read-write · current set the command privilege level(1~14) for accounting command privilege 0 means disable | |||||||||||||||||||||
| SupdatePeriod | 1.3.6.1.4.1.890.1.5.13.13.16.15.2.5 | INTEGER (1..2147483647) | RW | ||||||||||||||||||
scalar · INTEGER (1..2147483647) · read-write · current set the update interval of accounting, 1~2147483647 minutes | |||||||||||||||||||||
| ScommandsMethod | 1.3.6.1.4.1.890.1.5.13.13.16.15.2.6 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current show the accounting method for commands level accounting.
| |||||||||||||||||||||
| Nauthor | 1.3.6.1.4.1.890.1.5.13.13.16.15.3 | ||||||||||||||||||||
| TauthorPrivModeTable | 1.3.6.1.4.1.890.1.5.13.13.16.15.3.1 | NA | |||||||||||||||||||
table · not-accessible · current This table is to configure the mode of authorization for each privilege | |||||||||||||||||||||
| RauthorPrivModeEntry | 1.3.6.1.4.1.890.1.5.13.13.16.15.3.1.1 | NA | |||||||||||||||||||
| CauthorPrivilege | 1.3.6.1.4.1.890.1.5.13.13.16.15.3.1.1.1 | INTEGER (1..14) | RW | ||||||||||||||||||
column · INTEGER (1..14) · read-write · current Set the privilege level for authorization, every command will have its assigned privilege, authorization happens when user executes a command which privilege is specified here. Accepted value is 1~14 | |||||||||||||||||||||
| CauthorMode | 1.3.6.1.4.1.890.1.5.13.13.16.15.3.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Set the authorization mode when authorization occurred. none: no authorization local: commands will be authorized with default privilege tacacs+: authorization will be sent to remote tacacs+ server. tacacs+ then none: authorization will be granted if there is no response from tacacs+ server. tacacs+ then local: local authorization will take place if there is no reponse from tacacs+ server.
| |||||||||||||||||||||
| Nradius | 1.3.6.1.4.1.890.1.5.13.13.16.15.4 | ||||||||||||||||||||
| NradiusAuthen | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1 | ||||||||||||||||||||
| SradiusAuthenRedundantMode | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Configure the strategy of server selection. index priority: the device tries to contact with the first server, if no response then the device tries to contact with the second server. round robin: to alternate between the servers that it sends message to.
| |||||||||||||||||||||
| SradiusAuthenTimeoutPeriod | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1.2 | INTEGER (1..300) | RW | ||||||||||||||||||
scalar · INTEGER (1..300) · read-write · current Set the timeout interval in seconds that the device waits for response from the server. 1~300 seconds When two servers configured and mode is index-priority, the actual timeout will be half of the configuration value. | |||||||||||||||||||||
| TradiusAuthenServerTable | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1.3 | NA | |||||||||||||||||||
| RradiusAuthenServerEntry | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1.3.1 | NA | |||||||||||||||||||
| CradiusAuthenServerIndex | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1.3.1.1 | INTEGER (1..2) | RO | ||||||||||||||||||
column · INTEGER (1..2) · read-only · current The index of the server. | |||||||||||||||||||||
| CradiusAuthenServerIP | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1.3.1.2 | InetAddress | RW | ||||||||||||||||||
column · InetAddress · read-write · current The IP address of specified radius server. | |||||||||||||||||||||
| CradiusAuthenServerPort | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1.3.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The UDP port of specified radius server | |||||||||||||||||||||
| CradiusAuthenServerSecret | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1.3.1.4 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current A string key shared with the radius server | |||||||||||||||||||||
| NradiusAcct | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2 | ||||||||||||||||||||
| SradiusAcctRedundantMode | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Configure the strategy of server selection. index priority: the device tries to contact with the first server, if no response then the device tries to contact with the second server. round robin: to alternate between the servers that it sends message to.
| |||||||||||||||||||||
| SradiusAcctTimeoutPeriod | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2.2 | INTEGER (1..300) | RW | ||||||||||||||||||
scalar · INTEGER (1..300) · read-write · current Set the timeout interval in seconds that the device waits for response from the server. 1~300 seconds. When two servers configured and mode is index-priority, the actual timeout will be half of the configuration value. | |||||||||||||||||||||
| TradiusAcctServerTable | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2.3 | NA | |||||||||||||||||||
| RradiusAcctServerEntry | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2.3.1 | NA | |||||||||||||||||||
| CradiusAcctServerIndex | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2.3.1.1 | INTEGER (1..2) | RO | ||||||||||||||||||
column · INTEGER (1..2) · read-only · current The index of the server. | |||||||||||||||||||||
| CradiusAcctServerIP | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2.3.1.2 | InetAddress | RW | ||||||||||||||||||
column · InetAddress · read-write · current The IP address of specified radius server. | |||||||||||||||||||||
| CradiusAcctServerPort | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2.3.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The UDP port of specified radius server | |||||||||||||||||||||
| CradiusAcctServerSecret | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2.3.1.4 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current A string key shared with the radius server | |||||||||||||||||||||
| Ntacacsplus | 1.3.6.1.4.1.890.1.5.13.13.16.15.5 | ||||||||||||||||||||
| NtacacsplusAuthen | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1 | ||||||||||||||||||||
| StacacsplusAuthenRedundantMode | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Configure the strategy of server selection. index priority: the device tries to contact with the first server, if no response then the device tries to contact with the second server. round robin: to alternate between the servers that it sends message to.
| |||||||||||||||||||||
| StacacsplusAuthenTimeoutPeriod | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1.2 | INTEGER (1..300) | RW | ||||||||||||||||||
scalar · INTEGER (1..300) · read-write · current Set the timeout interval in seconds that the device waits for response from the server. 1~300 seconds. When two servers configured and mode is index-priority, the actual timeout will be half of the configuration value. | |||||||||||||||||||||
| TtacacsplusAuthenServerTable | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1.3 | NA | |||||||||||||||||||
| RtacacsplusAuthenServerEntry | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry of tacacsplusAuthServerTable. | |||||||||||||||||||||
| CtacscsplusAuthenServerIndex | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1.3.1.1 | INTEGER (1..2) | RO | ||||||||||||||||||
column · INTEGER (1..2) · read-only · current The index of the server. | |||||||||||||||||||||
| CtacscsplusAuthenServerIP | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1.3.1.2 | InetAddress | RW | ||||||||||||||||||
column · InetAddress · read-write · current The IP address of specified tacacs+ server. | |||||||||||||||||||||
| CtacscsplusAuthenServerPort | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1.3.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The TCP port of specified tacacs+ server | |||||||||||||||||||||
| CtacscsplusAuthenServerSecret | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1.3.1.4 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current A string key shared with the tacacs+ server | |||||||||||||||||||||
| NtacacsplusAcct | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2 | ||||||||||||||||||||
| StacacsplusAcctRedundantMode | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Configure the strategy of server selection. index priority: the device tries to contact with the first server, if no response then the device tries to contact with the second server. round robin: to alternate between the servers that it sends message to.
| |||||||||||||||||||||
| StacacsplusAcctTimeoutPeriod | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2.2 | INTEGER (1..300) | RW | ||||||||||||||||||
scalar · INTEGER (1..300) · read-write · current Set the timeout interval in seconds that the device waits for response from the server. 1~300 seconds. When two servers configured and mode is index-priority, the actual timeout will be half of the configuration value. | |||||||||||||||||||||
| TtacacsplusAcctServerTable | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2.3 | NA | |||||||||||||||||||
| RtacacsplusAcctServerEntry | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2.3.1 | NA | |||||||||||||||||||
| CtacacsplusAcctServerIndex | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2.3.1.1 | INTEGER (1..2) | RO | ||||||||||||||||||
column · INTEGER (1..2) · read-only · current The index of the server. | |||||||||||||||||||||
| CtacacsplusAcctServerIP | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2.3.1.2 | InetAddress | RW | ||||||||||||||||||
column · InetAddress · read-write · current The IP address of specified tacacs+ server. | |||||||||||||||||||||
| CtacacsplusAcctServerPort | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2.3.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The TCP port of specified tacacs+ server | |||||||||||||||||||||
| CtacacsplusAcctServerSecret | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2.3.1.4 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current A string key shared with the tacacs+ server | |||||||||||||||||||||
| NtacacsplusAuthor | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3 | ||||||||||||||||||||
| StacacsplusAuthorRedundantMode | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Configure the strategy of server selection. index priority: the device tries to contact with the first server, if no response then the device tries to contact with the second server. round robin: to alternate between the servers that it sends message to.
| |||||||||||||||||||||
| StacacsplusAuthorTimeoutPeriod | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3.2 | INTEGER (1..300) | RW | ||||||||||||||||||
scalar · INTEGER (1..300) · read-write · current Timeout period (second) of command authorization via TACACS+. 1~300 seconds When two servers configured and mode is index-priority, the actual timeout will be half of the configuration value. | |||||||||||||||||||||
| TtacacsplusAuthorServerTable | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3.3 | NA | |||||||||||||||||||
table · not-accessible · current This table is supported by R5.06 and later versions. | |||||||||||||||||||||
| RtacacsplusAuthorServerEntry | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry of tacacsplusAuthorServerEntry. This table is supported by R5.06 and later versions. | |||||||||||||||||||||
| CtacacsplusAuthorServerIndex | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3.3.1.1 | INTEGER (1..2) | RO | ||||||||||||||||||
column · INTEGER (1..2) · read-only · current The index of the server. | |||||||||||||||||||||
| CtacacsplusAuthorServerIP | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3.3.1.2 | InetAddress | RW | ||||||||||||||||||
column · InetAddress · read-write · current TACACS+ server IP for command authorization. | |||||||||||||||||||||
| CtacacsplusAuthorServerPort | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3.3.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current TACACS+ server port for command authorization. | |||||||||||||||||||||
| CtacacsplusAuthorServerSecret | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3.3.1.4 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current TACACS+ server secret key for command authorization. | |||||||||||||||||||||
| NsystemStatus | 1.3.6.1.4.1.890.1.5.13.13.16.16 | ||||||||||||||||||||
| NchassisStats | 1.3.6.1.4.1.890.1.5.13.13.16.16.1 | ||||||||||||||||||||
| TpowerinfoTable | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.1 | NA | |||||||||||||||||||
table · not-accessible · current A table that display the status information for power module | |||||||||||||||||||||
| RpowerinfoEntry | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.1.1 | NA | |||||||||||||||||||
| CpowerinfoIndex | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.1.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current The index for the power module
| |||||||||||||||||||||
| CpowerinfoMode | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.1.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Display the AC/DC mode for the power module | |||||||||||||||||||||
| CpowerinfoStatus | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.1.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Display the status for the power module. up: the module is exist and voltage is well. down: the module is exist and voltage is fault. not exist: the module is not exist | |||||||||||||||||||||
| TfaninfoTable | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.2 | NA | |||||||||||||||||||
table · not-accessible · current A table that display the status information for fan module | |||||||||||||||||||||
| RfaninfoEntry | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.2.1 | NA | |||||||||||||||||||
| CfanModuleStatus | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.2.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The fan module exist or not
| |||||||||||||||||||||
| CfanAlarmStatus | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.2.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The alarm status of the fan module
| |||||||||||||||||||||
| NacPowerCardInfo | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3 | ||||||||||||||||||||
| SacCardPowerSource | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The power source that provides power currently.
| |||||||||||||||||||||
| SacCardSysPowerConsumption | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.2 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The system power consumption. Unit: mW | |||||||||||||||||||||
| SacCardBatChargingPower | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.3 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The power that is used by charging feature. Unit: mW | |||||||||||||||||||||
| SacCardBatStatus | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.4 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The status of battery.
| |||||||||||||||||||||
| SacCardBatTemperature | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.5 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The temperature of battery. Unit: Celsius *Note that this value will always be 0 when battery does not exist. | |||||||||||||||||||||
| SacCardBatRemainingPower | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.6 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The remaining power of battery. Unit: percentage (%) *Note that this value will always be 0 when battery does not exist. | |||||||||||||||||||||
| SacCardBatVoltage | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.7 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The voltage of battery. Unit: mV *Note that this value will always be 0 when battery does not exist. | |||||||||||||||||||||
| SacCardBatVoltageCondition | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.8 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The validation of battery information (status). *Note that this value will always be invalid(0) when battery does not exist.
| |||||||||||||||||||||
| SacCardBatCapacityValidation | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.9 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The validation of battery information (capacity). *Note that this value will always be invalid(0) when battery does not exist.
| |||||||||||||||||||||
| SacCardChargerStatus | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.10 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The status of charger.
| |||||||||||||||||||||
| SacCardChargingCurrent | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.11 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The charging current of charger. Unit: mA *Note that this value will always be 0 when charger is off. | |||||||||||||||||||||
| SacCardChargingVoltageTarget | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.12 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The charging voltage of charger. Unit: mV *Note that this value will always be 0 when charger is off. | |||||||||||||||||||||
| SacCardChargingTime | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.13 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The time period since charger has been enabled. Unit: second *Note that this value will always be 0 when charger is off. | |||||||||||||||||||||
| SacCardTrickleCharge | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.14 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The status of trickle charger. *Note that this value will always be '-' when charger is off.
| |||||||||||||||||||||
| NsysMgmtOnlineUser | 1.3.6.1.4.1.890.1.5.13.13.16.17 | ||||||||||||||||||||
| TonlineUserTable | 1.3.6.1.4.1.890.1.5.13.13.16.17.1 | NA | |||||||||||||||||||
| RonlineUserEntry | 1.3.6.1.4.1.890.1.5.13.13.16.17.1.1 | NA | |||||||||||||||||||
| ConlineUserIndex | 1.3.6.1.4.1.890.1.5.13.13.16.17.1.1.1 | INTEGER | RO | ||||||||||||||||||
| ConlineUserSession | 1.3.6.1.4.1.890.1.5.13.13.16.17.1.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current user login service | |||||||||||||||||||||
| ConlineUserUser | 1.3.6.1.4.1.890.1.5.13.13.16.17.1.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current user name | |||||||||||||||||||||
| ConlineUserAddrType | 1.3.6.1.4.1.890.1.5.13.13.16.17.1.1.4 | InetAddressType | RO | ||||||||||||||||||
column · InetAddressType · read-only · current addr type
| |||||||||||||||||||||
| ConlineUserAddr | 1.3.6.1.4.1.890.1.5.13.13.16.17.1.1.5 | InetAddress | RO | ||||||||||||||||||
column · InetAddress · read-only · current addr | |||||||||||||||||||||
| ConlineUserLoginTime | 1.3.6.1.4.1.890.1.5.13.13.16.17.1.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current user login time | |||||||||||||||||||||
| SsysStdioDefault | 1.3.6.1.4.1.890.1.5.13.13.16.18 | INTEGER (1..120) | RW | ||||||||||||||||||
scalar · INTEGER (1..120) · read-write · current stdio default setting. | |||||||||||||||||||||
| NacPowerCardSetting | 1.3.6.1.4.1.890.1.5.13.13.16.19 | ||||||||||||||||||||
| SacCardBatteryCapacity | 1.3.6.1.4.1.890.1.5.13.13.16.19.1 | INTEGER (7..92) | RW | ||||||||||||||||||
scalar · INTEGER (7..92) · read-write · current Set battery capacity, user has to set this value to enable charger feature. When battery information is invalid, user needs to re-enter the batter capacity to continue charging procedure. | |||||||||||||||||||||
| SacCardBatteryTempThresholdHigh | 1.3.6.1.4.1.890.1.5.13.13.16.19.2 | INTEGER (-15..50) | RW | ||||||||||||||||||
scalar · INTEGER (-15..50) · read-write · current Battery high temperature threshold. | |||||||||||||||||||||
| SacCardBatteryTempThresholdLow | 1.3.6.1.4.1.890.1.5.13.13.16.19.3 | INTEGER (-15..50) | RW | ||||||||||||||||||
scalar · INTEGER (-15..50) · read-write · current Battery low temperature threshold. | |||||||||||||||||||||
| SsysReloadConfig | 1.3.6.1.4.1.890.1.5.13.13.16.20 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Reload the system with the specified configuration file. This operation may take a while, please set SNMP timeout to 30 or above. And pleasse note that if you reload a config and its IP is different to current IP, you may not get response.
| |||||||||||||||||||||
| Nvdsl | 1.3.6.1.4.1.890.1.5.13.13.17 | ||||||||||||||||||||
| Nselt | 1.3.6.1.4.1.890.1.5.13.13.17.1 | ||||||||||||||||||||
| SseltTarget | 1.3.6.1.4.1.890.1.5.13.13.17.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current IfIndex of the port which would be performed single end loopback test. | |||||||||||||||||||||
| SseltOps | 1.3.6.1.4.1.890.1.5.13.13.17.1.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The manager sets the object to 1 to start the selt and the agent clears the object to zero when selt is not in progress. | |||||||||||||||||||||
| SseltStatus | 1.3.6.1.4.1.890.1.5.13.13.17.1.3 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current Status description of the selt result. | |||||||||||||||||||||
| SseltCableType | 1.3.6.1.4.1.890.1.5.13.13.17.1.4 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The cable type that selt result indicates.
| |||||||||||||||||||||
| SseltLoopEstimateLengthFt | 1.3.6.1.4.1.890.1.5.13.13.17.1.5 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The estimated loop length that selt result indicates.
| |||||||||||||||||||||
| SseltLoopEstimateLengthMeter | 1.3.6.1.4.1.890.1.5.13.13.17.1.6 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The estimated loop length that selt result indicates.
| |||||||||||||||||||||
| NvdslOps | 1.3.6.1.4.1.890.1.5.13.13.17.2 | ||||||||||||||||||||
| SvdslTarget | 1.3.6.1.4.1.890.1.5.13.13.17.2.1 | PortList | RW | ||||||||||||||||||
scalar · PortList · read-write · current The target interface specified by ifindex to clear packet statistics. This is allowed for interface 1..48, 101..148 for TIU V48 system. | |||||||||||||||||||||
| SvdslOperation | 1.3.6.1.4.1.890.1.5.13.13.17.2.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Clear packet statistics on the target ifindex specified by vdslTarget. The value will return to '0' when clear operation has done.
| |||||||||||||||||||||
| Nvdsl2Profile | 1.3.6.1.4.1.890.1.5.13.13.17.4 | ||||||||||||||||||||
| Tvdsl2LineConfProfileExtendedTable | 1.3.6.1.4.1.890.1.5.13.13.17.4.1 | NA | |||||||||||||||||||
table · not-accessible · current This table contains information on the VDSL2 line profile extension configuration. | |||||||||||||||||||||
| Rvdsl2LineConfProfileExtendedEntry | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry extends the xdsl2LineConfProfEntry defined in RFC5650.
| |||||||||||||||||||||
| Cvdsl2LineConfProfileDpboEPsdID | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current standard psd shape id for psd toolbox
| |||||||||||||||||||||
| Cvdsl2LineConfProfileBitSwapDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable or disable downstream bit swap.
| |||||||||||||||||||||
| Cvdsl2LineConfProfileBitSwapUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable or disable upstream bit swap.
| |||||||||||||||||||||
| Cvdsl2LineConfProfileVectoring | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.4 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current A table containing the G.Vector information for each profile
| |||||||||||||||||||||
| Cvdsl2LineConfProfileRfiMode | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures Radio Frequency Intereference (RFI) mode.
| |||||||||||||||||||||
| Cvdsl2LineConfProfileDpboMode | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures DPBO mode for different procedure.
| |||||||||||||||||||||
| Cvdsl2LineConfProfileDpboEselmin | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.7 | Unsigned32 (0..511) | RW | ||||||||||||||||||
column · Unsigned32 (0..511) · read-write · current Configures DPBO E-side cable Electrical Length minimun.tcom mode only. Range from 0 dB (coded as 0) to 255.5 dB (coded as 511) in steps of 0.5 dB.
| |||||||||||||||||||||
| Cvdsl2LineConfProfileCompatible | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures ADSL compatible mode. <mode>: none|adsl2|adsl2+
| |||||||||||||||||||||
| Cvdsl2LineConfProfileAdslCarrierMaskUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.9 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current Configures ADSL upstream carrier mask | |||||||||||||||||||||
| Cvdsl2LineConfProfileAdslCarrierMaskDs0 | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.10 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current Configures ADSL downstream carrier mask 0 | |||||||||||||||||||||
| Cvdsl2LineConfProfileAdslCarrierMaskDs1 | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.11 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current Configures ADSL downstream carrier mask 1 | |||||||||||||||||||||
| Cvdsl2LineConfProfilePMMode | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.12 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures Power Management mode. <mode>: disable|allow-l3|allow-l2|allow-both
| |||||||||||||||||||||
| Cvdsl2LineConfProfilePMl0Time | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.13 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current Defines the l0-time value. Range from 0 to 65535 sec. | |||||||||||||||||||||
| Cvdsl2LineConfProfilePMl2Time | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.14 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current Defines the l2-time value. Range from 0 to 65535 sec. | |||||||||||||||||||||
| Cvdsl2LineConfProfilePMl2atpr | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.15 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current Defines the l2-atpr value. Range from 0 to 15 dB. | |||||||||||||||||||||
| Cvdsl2LineConfProfilePMl2atprt | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.16 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current Defines the l2-atprt value. Range from 0 to 15 dB. | |||||||||||||||||||||
| Cvdsl2LineConfProfileSosCrcDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.19 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configuration of downstream SOS CRC trigger condiftion <sos-crc> 0 ~ 65535 in unit of 0.02 normalized CRC | |||||||||||||||||||||
| Cvdsl2LineConfProfileSosCrcUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.20 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configuration of upstream SOS CRC trigger condiftion <sos-crc> 0 ~ 65535 in unit of 0.02 normalized CRC | |||||||||||||||||||||
| Cvdsl2LineConfProfileSosMaxSuccessDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.21 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configuration of downstream SOS max number of successful SOS procedures allowed in a 120 seconds interval before a full reinitialization is triggered <sos-max-success> 0 ~ 15, 0 is a special value indicating no limit on the maximum number of SOS recoveries within this time interval | |||||||||||||||||||||
| Cvdsl2LineConfProfileSosMaxSuccessUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.22 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configuration of upstream SOS max number of successful SOS procedures allowed in a 120 seconds interval before a full reinitialization is triggered <sos-max-success> 0 ~ 15, 0 is a special value indicating no limit on the maximum number of SOS recoveries within this time interval | |||||||||||||||||||||
| Cvdsl2LineConfProfileSosMonTimeDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.23 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configuration of downstream SOS monitoring time used to trigger and SOS operation <sos-mon-time> 64 ~ 16320 in ms | |||||||||||||||||||||
| Cvdsl2LineConfProfileSosMonTimeUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.24 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configuration of upstream SOS monitoring time used to trigger and SOS operation <sos-mon-time> 64 ~ 16320 in ms | |||||||||||||||||||||
| Cvdsl2LineConfProfileSosNToneDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.25 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configuration of downstream SOS tone degrade condition <sos-ntone> 0 ~ 100 in percent | |||||||||||||||||||||
| Cvdsl2LineConfProfileSosNToneUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.26 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configuration of upstream SOS tone degrade condition <sos-ntone> 0 ~ 100 in percent | |||||||||||||||||||||
| Cvdsl2LineConfProfileRocEnableDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.27 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configuration of upstream ROC Enable or disable downstream ROC
| |||||||||||||||||||||
| Cvdsl2LineConfProfileRocEnableUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.28 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configuration of upstream ROC Enable or disable upstream ROC
| |||||||||||||||||||||
| Cvdsl2LineConfProfileRocMinInpDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.29 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configuration of downstream minimum INP to be insured on the ROC channel <roc-min-inp-ds> 0 ~ 16 symbols in 0.5 symbol steps | |||||||||||||||||||||
| Cvdsl2LineConfProfileRocMinInpUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.30 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configuration of upstream minimum INP to be insured on the ROC channel <roc-min-inp-ds> 0 ~ 16 symbols in 0.5 symbol steps | |||||||||||||||||||||
| Cvdsl2LineConfProfileRocSnrmDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.31 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configuration of downstream SNRM for the ROC <roc-snrm-ds> 0 ~ 310 in unit of 0.1 dB | |||||||||||||||||||||
| Cvdsl2LineConfProfileRocSnrmUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.32 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configuration of upstream SNRM for the ROC <roc-snrm-ds> 0 ~ 310 in unit of 0.1 dB | |||||||||||||||||||||
| Cvdsl2LineConfProfileRocDynamicdtg | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.33 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current 00~3f in hex 01: enable SRA US Dynamic D. 02: enable SRA DS Dynamic D. 04: enable SRA US Dynamic T & G when ROC is disabled. 08: enable SRA DS Dynamic T & G when ROC is disabled. 10: enable SRA US Dynamic T & G when ROC is enabled. 20: enable SRA DS Dynamic T & G when ROC is enabled. | |||||||||||||||||||||
| Cvdsl2LineConfProfileAdsl2CustomPsd | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.36 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current Configuration of ADSL2/2+ custom downstream PSD template. There should be at least one psd value less than or equal to 160 The set of breakpoints can then be represented as: [(ToneIndex1.PSD1)], [(ToneIndex2.PSD2)], ... , [(ToneIndexN.PSDN)]. example:[(00.01).(00.50)],[00.02.00.A0],... | |||||||||||||||||||||
| Tvdsl2ChanConfProfileExTable | 1.3.6.1.4.1.890.1.5.13.13.17.4.3 | NA | |||||||||||||||||||
table · not-accessible · current This table contains information on the VDSL2 channel profile extension configuration for G.inp. | |||||||||||||||||||||
| Rvdsl2ChanConfProfileExEntry | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in vdsl2ChanConfProfileExtendedEntry. | |||||||||||||||||||||
| Cvdsl2ChanConfProfGinpRtxModeDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.4 | Xdsl2ConfigRtxMode | RW | ||||||||||||||||||
column · Xdsl2ConfigRtxMode · read-write · current G.inp(G.998.4) support setting on downstream direction. The possible values are: Forbidden(0) - Support for G998.4 is disabled. Preferred(1) - If G998.4 is supported by the far-end, it is enabled. Forced(2) - The line will only train if G998.4 can be enabled. Test(3) - G998.4 is enabled in test mode (refer to G998.4, Clause 10.4). | |||||||||||||||||||||
| Cvdsl2ChanConfProfGinpRtxModeUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.5 | Xdsl2ConfigRtxMode | RW | ||||||||||||||||||
column · Xdsl2ConfigRtxMode · read-write · current G.inp(G.998.4) support setting on upstream direction. The possible values are: Forbidden(0) - Support for G998.4 is disabled. Preferred(1) - If G998.4 is supported by the far-end, it is enabled. Forced(2) - The line will only train if G998.4 can be enabled. Test(3) - G998.4 is enabled in test mode (refer to G998.4, Clause 10.4). | |||||||||||||||||||||
| Cvdsl2ChanConfProfGinpEtrMaxDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.6 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current Defines the maximum allowed value for the ETR (Effective Throughput Rate). | |||||||||||||||||||||
| Cvdsl2ChanConfProfGinpEtrMaxUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.7 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current Defines the maximum allowed value for the ETR (Effective Throughput Rate). | |||||||||||||||||||||
| Cvdsl2ChanConfProfGinpEtrMinDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.8 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current Defines the minimum value for the ETR (Effective Throughput Rate). | |||||||||||||||||||||
| Cvdsl2ChanConfProfGinpEtrMinUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.9 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current Defines the minimum value for the ETR (Effective Throughput Rate). | |||||||||||||||||||||
| Cvdsl2ChanConfProfGinpNdrMaxDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.10 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current Overrules the wanted downstream maximum data rate provided in the SetLineTrafficConfiguration | |||||||||||||||||||||
| Cvdsl2ChanConfProfGinpNdrMaxUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.11 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current Overrules the wanted upstream maximum data rate provided in the SetLineTrafficConfiguration | |||||||||||||||||||||
| Cvdsl2ChanConfProfGinpShineRatioDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.12 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The assumed downstream fraction range from 1 to 255 (in unit of 0.001) of NDR necessary to correct SHINE noise. | |||||||||||||||||||||
| Cvdsl2ChanConfProfGinpShineRatioUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.13 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The assumed upstream fraction range from 1 to 255 (in unit of 0.001) of NDR necessary to correct SHINE noise. | |||||||||||||||||||||
| Cvdsl2ChanConfProfGinpLeftrThresholdDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.14 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The downstream rate threshold (fraction of NDR) below which the Low Error Free Rate (LEFTR) defect is declared. | |||||||||||||||||||||
| Cvdsl2ChanConfProfGinpLeftrThresholdUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.15 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The upstream rate threshold (fraction of NDR) below which the Low Error Free Rate (LEFTR) defect is declared. | |||||||||||||||||||||
| Cvdsl2ChanConfProfGinpMaxDelayDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.16 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current G.inp-specific value that overrules the traffic configuration setting in downstream direction. | |||||||||||||||||||||
| Cvdsl2ChanConfProfGinpMaxDelayUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.17 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current G.inp-specific value that overrules the traffic configuration setting in upstream direction. | |||||||||||||||||||||
| Cvdsl2ChanConfProfGinpMinDelayDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.18 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current G.inp-specific value that overrules minimum-delay-ds in channel profile setting. | |||||||||||||||||||||
| Cvdsl2ChanConfProfGinpMinDelayUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.19 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current G.inp-specific value that overrules minimum-delay-us in channel profile setting. | |||||||||||||||||||||
| Cvdsl2ChanConfProfGinpInpMinDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.20 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current G.inp-specific value that overrules INPmin-ds in channel profile setting. The possible values are: 0~63 in unit of 1 DMT symbol. Remark: current implementation is 0~31 | |||||||||||||||||||||
| Cvdsl2ChanConfProfGinpInpMinUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.21 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current G.inp-specific value that overrules INPmin-ds in channel profile setting. Unit is symbol. The possible values are: 0~63 in unit of 1 DMT symbol. Remark: current implementation is 0~31 | |||||||||||||||||||||
| Cvdsl2ChanConfProfGinpReinCfgInpDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.22 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current G.inp-specific value that overrules the traffic configuration setting. Unit is symbol. The possible values are: 0~7 in unit of 1 DMT symbol. | |||||||||||||||||||||
| Cvdsl2ChanConfProfGinpReinCfgInpUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.23 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current G.inp-specific value that overrules the traffic configuration setting. Unit is symbol. The possible values are: 0~7 in unit of a DMT symbol. | |||||||||||||||||||||
| Cvdsl2ChanConfProfGinpReinCfgFreqDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.24 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current G.inp-specific value that overrules the traffic configuration setting. The possible values is 100 or 120 in unit of Hz. 100 - 100Hz 120 - 120Hz | |||||||||||||||||||||
| Cvdsl2ChanConfProfGinpReinCfgFreqUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.25 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current G.inp-specific value that overrules the traffic configuration setting. The possible value is 100 or 120 in unit of Hz. 100 - 100Hz 120 - 120Hz | |||||||||||||||||||||
| Cvdsl2ChanConfProfTpstcAdsl | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.26 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures TPSTC type for ADSL.
| |||||||||||||||||||||
| Cvdsl2ChanConfProfSosMinRateDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.28 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current Configure downstream SOS minimumrate <min-rate> 32 ~ 100032 in kbps | |||||||||||||||||||||
| Cvdsl2ChanConfProfSosMinRateUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.29 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current Configure upstream SOS minimumrate <min-rate> 32 ~ 100032 in kbps | |||||||||||||||||||||
| Tvdsl2InmConfProfileTable | 1.3.6.1.4.1.890.1.5.13.13.17.4.4 | NA | |||||||||||||||||||
table · not-accessible · current This table contains information on the VDSL2 Inm profile configuration. | |||||||||||||||||||||
| Rvdsl2InmConfProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1 | NA | |||||||||||||||||||
| Cvdsl2InmConfProfName | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.1 | DisplayString (SIZE (1..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (1..31)) · read-only · current Name of Inm profile. | |||||||||||||||||||||
| Cvdsl2InmConfProfEimNe | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.2 | INTEGER (0..3) | RC | ||||||||||||||||||
column · INTEGER (0..3) · read-create · current Configures near end equivalent INP mode. | |||||||||||||||||||||
| Cvdsl2InmConfProfEimFe | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.3 | INTEGER (0..3) | RC | ||||||||||||||||||
column · INTEGER (0..3) · read-create · current Configures far end equivalent INP mode. | |||||||||||||||||||||
| Cvdsl2InmConfProfCcpNe | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.4 | INTEGER (0..64) | RC | ||||||||||||||||||
column · INTEGER (0..64) · read-create · current Configures near end cluster continuation parameter. | |||||||||||||||||||||
| Cvdsl2InmConfProfCcpFe | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.5 | INTEGER (0..64) | RC | ||||||||||||||||||
column · INTEGER (0..64) · read-create · current Configures far end cluster continuation parameter. | |||||||||||||||||||||
| Cvdsl2InmConfProfIatoNe | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.6 | INTEGER (3..511) | RC | ||||||||||||||||||
column · INTEGER (3..511) · read-create · current Configures near end inter-arrival time offset. | |||||||||||||||||||||
| Cvdsl2InmConfProfIatoFe | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.7 | INTEGER (3..511) | RC | ||||||||||||||||||
column · INTEGER (3..511) · read-create · current Configures far end inter-arrival time offset. | |||||||||||||||||||||
| Cvdsl2InmConfProfIatsNe | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.8 | INTEGER (0..7) | RC | ||||||||||||||||||
column · INTEGER (0..7) · read-create · current Configures near end inter-arrival time step. | |||||||||||||||||||||
| Cvdsl2InmConfProfIatsFe | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.9 | INTEGER (0..7) | RC | ||||||||||||||||||
column · INTEGER (0..7) · read-create · current Configures far end inter-arrival time step. | |||||||||||||||||||||
| Cvdsl2InmConfProfIsdbNe | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.10 | INTEGER (-128..127) | RC | ||||||||||||||||||
column · INTEGER (-128..127) · read-create · current Configures near end ISDD sensitivity. | |||||||||||||||||||||
| Cvdsl2InmConfProfEifNe | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.12 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current Configures near end equivalent INP format.
| |||||||||||||||||||||
| Cvdsl2InmConfProfEifFe | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.13 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current Configures far end equivalent INP format.
| |||||||||||||||||||||
| Cvdsl2InmConfProfRowStatus | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.14 | RowStatus | RC | ||||||||||||||||||
| Tvdsl2TemplateConfProfileExTable | 1.3.6.1.4.1.890.1.5.13.13.17.4.5 | NA | |||||||||||||||||||
table · not-accessible · current This table contains information on the VDSL2 template profile configuration. | |||||||||||||||||||||
| Rvdsl2TemplateConfProfileExEntry | 1.3.6.1.4.1.890.1.5.13.13.17.4.5.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in vdsl2TemplateConfProfileExEntry. | |||||||||||||||||||||
| Cvdsl2TemplateConfProfileInmProf | 1.3.6.1.4.1.890.1.5.13.13.17.4.5.1.1 | OCTET STRING | RC | ||||||||||||||||||
column · OCTET STRING · read-create · current Inm profile for template proflie. | |||||||||||||||||||||
| Nvdsl2Stats | 1.3.6.1.4.1.890.1.5.13.13.17.5 | ||||||||||||||||||||
| Txdsl2LineBandExtTable | 1.3.6.1.4.1.890.1.5.13.13.17.5.1 | NA | |||||||||||||||||||
table · not-accessible · current This table show tx power of band. | |||||||||||||||||||||
| Rxdsl2LineBandExtEntry | 1.3.6.1.4.1.890.1.5.13.13.17.5.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry extends xdsl2LineBandEntry defined in RFC5650.
| |||||||||||||||||||||
| Cxdsl2LineBandTxPower | 1.3.6.1.4.1.890.1.5.13.13.17.5.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Xdsl line band transmitted power (in unit of 0.1 dBm, -1280 indicates that power is empty) | |||||||||||||||||||||
| Txdsl2ChannelStatusExTable | 1.3.6.1.4.1.890.1.5.13.13.17.5.2 | NA | |||||||||||||||||||
table · not-accessible · current The table displays VDSL2 channel Status. This table is supported by R5.06 and later versions. | |||||||||||||||||||||
| Rxdsl2ChannelStatusExEntry | 1.3.6.1.4.1.890.1.5.13.13.17.5.2.1 | NA | |||||||||||||||||||
| Cxdsl2ChannelActualRaMode | 1.3.6.1.4.1.890.1.5.13.13.17.5.2.1.2 | Xdsl2StatusActualRaMode | RO | ||||||||||||||||||
column · Xdsl2StatusActualRaMode · read-only · current The actual RA mode. The possible values are: fixedRateMode(1) - Fixed rate mode raInit(2) - Adaptive rate mode at initialization dynamicRa(3) - Dynamic rate adaptation sosEnabled(4) - SOS enabled | |||||||||||||||||||||
| Cxdsl2ChannelRtxMode | 1.3.6.1.4.1.890.1.5.13.13.17.5.2.1.3 | Xdsl2StatusRtxMode | RO | ||||||||||||||||||
column · Xdsl2StatusRtxMode · read-only · current RTX_USED operational data parameter. The possible values are: rtxInUse(1) - RTX in use. rtxForbidden(2) - RTX not in use because RTX_MODE = FORBIDDEN. rtxNotSupportedXtuC(3) - RTX not in use because it is not supported by the XTU-C. rtxNotSupportedXtuR(4) - RTX not in use because it is not supported by the XTU-R. rtxNotSupportedBoth(5) - RTX not in use because it is not supported by the XTU-C and XTU-R. | |||||||||||||||||||||
| Cxdsl2ChannelRtxOverhead | 1.3.6.1.4.1.890.1.5.13.13.17.5.2.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Expected retransmission overhead in G.inp due to REIN and SHINE noise. Unit is kbps.
| |||||||||||||||||||||
| Cxdsl2ChannelGinpFramingType | 1.3.6.1.4.1.890.1.5.13.13.17.5.2.1.5 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current This parameter is equal to zero if G.inp is not enabled. If G.inp is enabled, it reports the framing type in use (1, 2, 3, or 4). | |||||||||||||||||||||
| Cxdsl2ChannelActualInpAgainstREIN | 1.3.6.1.4.1.890.1.5.13.13.17.5.2.1.6 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current This parameter reports the actual INP against REIN noise in unit of 0.5 symbol.
| |||||||||||||||||||||
| Txdsl2LineUsResultMaskTable | 1.3.6.1.4.1.890.1.5.13.13.17.5.3 | NA | |||||||||||||||||||
table · not-accessible · current The table displays VDSL line actual PSD mask. This table is supported by R5.01 and later versions. | |||||||||||||||||||||
| Rxdsl2LineUsResultMaskEntry | 1.3.6.1.4.1.890.1.5.13.13.17.5.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry of xdsl2LineUsResultMaskTable.
| |||||||||||||||||||||
| Cxdsl2LineUsMaskId | 1.3.6.1.4.1.890.1.5.13.13.17.5.3.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The id of the turning point of the mask, starting from 1. | |||||||||||||||||||||
| Cxdsl2LineUsMaskTone | 1.3.6.1.4.1.890.1.5.13.13.17.5.3.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The tone id. | |||||||||||||||||||||
| Cxdsl2LineUsMaskPsd | 1.3.6.1.4.1.890.1.5.13.13.17.5.3.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The psd, in 0.1 dBm/Hz. | |||||||||||||||||||||
| Txdsl2LineDsResultMaskTable | 1.3.6.1.4.1.890.1.5.13.13.17.5.4 | NA | |||||||||||||||||||
table · not-accessible · current The table displays VDSL line actual PSD mask. This table is supported by R5.01 and later versions. | |||||||||||||||||||||
| Rxdsl2LineDsResultMaskEntry | 1.3.6.1.4.1.890.1.5.13.13.17.5.4.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry of xdsl2LineDsResultMaskTable.
| |||||||||||||||||||||
| Cxdsl2LineDsMaskId | 1.3.6.1.4.1.890.1.5.13.13.17.5.4.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The id of the turning point of the mask, starting from 1. | |||||||||||||||||||||
| Cxdsl2LineDsMaskTone | 1.3.6.1.4.1.890.1.5.13.13.17.5.4.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The tone id. | |||||||||||||||||||||
| Cxdsl2LineDsMaskPsd | 1.3.6.1.4.1.890.1.5.13.13.17.5.4.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The psd, in 0.1 dBm/Hz. | |||||||||||||||||||||
| Nxdsl2ExtPM | 1.3.6.1.4.1.890.1.5.13.13.17.6 | ||||||||||||||||||||
| Txdsl2ExtPMLineTable | 1.3.6.1.4.1.890.1.5.13.13.17.6.1 | NA | |||||||||||||||||||
table · not-accessible · current The table xdsl2ExtPMLineTable is a an extension of xdsl2PMLineCurrTable, which contains current Performance Monitoring results for DSL lines since system restarted. | |||||||||||||||||||||
| Rxdsl2ExtPMLineEntry | 1.3.6.1.4.1.890.1.5.13.13.17.6.1.1 | NA | |||||||||||||||||||
row · not-accessible · current an entry extends the xdsl2PMLinecurrEntry defined in RFC5650.
One index of this table is an interface index where the
interface has an ifType of vdsl2(251). A second index of
this table is the termination unit.
| |||||||||||||||||||||
| Cxdsl2ExtPMLineFecs | 1.3.6.1.4.1.890.1.5.13.13.17.6.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Count of seconds since system restarted that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibited during UAS or SES.
| |||||||||||||||||||||
| Cxdsl2ExtPMLineEs | 1.3.6.1.4.1.890.1.5.13.13.17.6.1.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Count of seconds since system restarted that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >=1 OR LPR >= 1. xTU-R: FEBE >= 1 for one or more bearer channels OR LOS-FE >=1 OR RDI >=1 OR LPR-FE >=1 . This parameter is inhibited during UAS.
| |||||||||||||||||||||
| Cxdsl2ExtPMLineSes | 1.3.6.1.4.1.890.1.5.13.13.17.6.1.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Count of seconds since system restarts that there was: xTU-C: (CRC-8 anomalies in one or more of the received bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1. xTU-R: (FEBE anomalies in one or more of the received bearer channels) >= 18 OR LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1 . This parameter is inhibited during UAS.
| |||||||||||||||||||||
| Cxdsl2ExtPMLineLoss | 1.3.6.1.4.1.890.1.5.13.13.17.6.1.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Count of seconds since system restarted that there was LOS (or LOS-FE for xTU-R).
| |||||||||||||||||||||
| Cxdsl2ExtPMLineUas | 1.3.6.1.4.1.890.1.5.13.13.17.6.1.1.5 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Count of seconds in Unavailability State since system restarted. Unavailability begins at the onset of 10 contiguous severely errored seconds, and ends at the onset of 10 contiguous seconds with no severely errored seconds.
| |||||||||||||||||||||
| Txdsl2ExtPMLineInitTable | 1.3.6.1.4.1.890.1.5.13.13.17.6.2 | NA | |||||||||||||||||||
table · not-accessible · current The table xdsl2ExtPMLineInitTable contains PM line initialization history for DSL lines since system restarted. | |||||||||||||||||||||
| Rxdsl2ExtPMLineInitEntry | 1.3.6.1.4.1.890.1.5.13.13.17.6.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry extends xdsl2PMLineInitCurrEntry defined in RFC5650.
| |||||||||||||||||||||
| Cxdsl2ExtPMLInitFullInits | 1.3.6.1.4.1.890.1.5.13.13.17.6.2.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Count of full initializations attempted on the line (successful and failed) since system restarted. | |||||||||||||||||||||
| Cxdsl2ExtPMLInitFailedFullInits | 1.3.6.1.4.1.890.1.5.13.13.17.6.2.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Count of failed full initializations on the line since system restarted. | |||||||||||||||||||||
| Txdsl2ExtPMChTable | 1.3.6.1.4.1.890.1.5.13.13.17.6.3 | NA | |||||||||||||||||||
table · not-accessible · current The table contains Performance Monitoring results for DSL channels since system restarted. | |||||||||||||||||||||
| Rxdsl2ExtPMChEntry | 1.3.6.1.4.1.890.1.5.13.13.17.6.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry extends xdsl2PMChCurrEntry defined in RFC5650
| |||||||||||||||||||||
| Cxdsl2ExtPMChCodingViolations | 1.3.6.1.4.1.890.1.5.13.13.17.6.3.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the CRC is applied over multiple channels, then each related CRC-8 (or FEBE) anomaly SHOULD increment each of the counters related to the individual channels. | |||||||||||||||||||||
| Cxdsl2ExtPMChCorrectedBlocks | 1.3.6.1.4.1.890.1.5.13.13.17.6.3.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Count of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the FEC is applied over multiple channels, then each related FEC (or FFEC) anomaly SHOULD increment each of the counters related to the individual channels. | |||||||||||||||||||||
| Cxdsl2ExtPMChUncorrectBlocks | 1.3.6.1.4.1.890.1.5.13.13.17.6.3.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Performance channel uncorrected blocks. | |||||||||||||||||||||
| Cxdsl2ExtPMChRtxCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.3.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Performance channel Rtx code word. | |||||||||||||||||||||
| Cxdsl2ExtPMChRtxCorrectedCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.3.1.5 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Performance channel Rtx corrected code word. | |||||||||||||||||||||
| Cxdsl2ExtPMChRtxUncorrectedCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.3.1.6 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Performance channel Rtx uncorrected code word. | |||||||||||||||||||||
| Txdsl2ExtPMLineCurrTable | 1.3.6.1.4.1.890.1.5.13.13.17.6.4 | NA | |||||||||||||||||||
table · not-accessible · current The table xdsl2ExtPMLineCurrTable extends xdsl2PMLineCurrTable. | |||||||||||||||||||||
| Rxdsl2ExtPMLineCurrEntry | 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1 | NA | |||||||||||||||||||
row · not-accessible · current The table xdsl2ExtPMLineCurrTable extends xdsl2PMLineCurrTable.
| |||||||||||||||||||||
| Cxdsl2PMLCurr15MLofs | 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Count of seconds during this interval that there was LOF.
| |||||||||||||||||||||
| Cxdsl2PMLCurr15MLol | 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Count of times during this interval that the line Loss of Link.
| |||||||||||||||||||||
| Cxdsl2PMLCurr15MLols | 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Count of seconds during this interval that there was Loss of Link.
| |||||||||||||||||||||
| Cxdsl2PMLCurr15MLpr | 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Count of times during this interval that the line Loss of Power.
| |||||||||||||||||||||
| Cxdsl2PMLCurr15MLprs | 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Count of seconds during this interval that there was Loss of Power.
| |||||||||||||||||||||
| Cxdsl2PMLCurr1DayLofs | 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Count of seconds during this interval that there was LOF.
| |||||||||||||||||||||
| Cxdsl2PMLCurr1DayLol | 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Count of times during this interval that the line Loss of Link. | |||||||||||||||||||||
| Cxdsl2PMLCurr1DayLols | 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Count of seconds during this interval that there was Loss of Link.
| |||||||||||||||||||||
| Cxdsl2PMLCurr1DayLpr | 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Count of times during this interval that the line Loss of Power. | |||||||||||||||||||||
| Cxdsl2PMLCurr1DayLprs | 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Count of seconds during this interval that there was Loss of Power.
| |||||||||||||||||||||
| Txdsl2ExtPMLineHist15MinTable | 1.3.6.1.4.1.890.1.5.13.13.17.6.5 | NA | |||||||||||||||||||
table · not-accessible · current The table xdsl2ExtPMLineHist15MinTable extends xdsl2PMLineHist15MinTable. | |||||||||||||||||||||
| Rxdsl2ExtPMLineHist15MinEntry | 1.3.6.1.4.1.890.1.5.13.13.17.6.5.1 | NA | |||||||||||||||||||
row · not-accessible · current The table xdsl2ExtPMLineHist15MinTable extends xdsl2PMLineHist15MinTable. | |||||||||||||||||||||
| Cxdsl2PMLHist15MLofs | 1.3.6.1.4.1.890.1.5.13.13.17.6.5.1.1 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Count of seconds during this interval that there was LOF.
| |||||||||||||||||||||
| Cxdsl2PMLHist15MLol | 1.3.6.1.4.1.890.1.5.13.13.17.6.5.1.2 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Count of times during this interval that the line Loss of Link. | |||||||||||||||||||||
| Cxdsl2PMLHist15MLols | 1.3.6.1.4.1.890.1.5.13.13.17.6.5.1.3 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Count of seconds during this interval that the line Loss of Link.
| |||||||||||||||||||||
| Cxdsl2PMLHist15MLpr | 1.3.6.1.4.1.890.1.5.13.13.17.6.5.1.4 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Count of times during this interval that the line Loss of Power. | |||||||||||||||||||||
| Cxdsl2PMLHist15MLprs | 1.3.6.1.4.1.890.1.5.13.13.17.6.5.1.5 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Count of seconds during this interval that the line Loss of Power.
| |||||||||||||||||||||
| Txdsl2ExtPMLineHist1DayTable | 1.3.6.1.4.1.890.1.5.13.13.17.6.6 | NA | |||||||||||||||||||
table · not-accessible · current The table xdsl2ExtPMLineHist1DayTable extends xdsl2PMLineHist1DayTable. | |||||||||||||||||||||
| Rxdsl2ExtPMLineHist1DayEntry | 1.3.6.1.4.1.890.1.5.13.13.17.6.6.1 | NA | |||||||||||||||||||
row · not-accessible · current The table xdsl2ExtPMLineHist1DayTable extends xdsl2PMLineHist1DayTable. | |||||||||||||||||||||
| Cxdsl2PMLHist1DLofs | 1.3.6.1.4.1.890.1.5.13.13.17.6.6.1.1 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Count of seconds during this interval that there was LOF.
| |||||||||||||||||||||
| Cxdsl2PMLHist1DLol | 1.3.6.1.4.1.890.1.5.13.13.17.6.6.1.2 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Count of times during this interval that the line Loss of Link. | |||||||||||||||||||||
| Cxdsl2PMLHist1DLols | 1.3.6.1.4.1.890.1.5.13.13.17.6.6.1.3 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Count of seconds during this interval that the line Loss of Link.
| |||||||||||||||||||||
| Cxdsl2PMLHist1DLpr | 1.3.6.1.4.1.890.1.5.13.13.17.6.6.1.4 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Count of times during this interval that the line Loss of Power. | |||||||||||||||||||||
| Cxdsl2PMLHist1DLprs | 1.3.6.1.4.1.890.1.5.13.13.17.6.6.1.5 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Count of seconds during this interval that the line Loss of Power.
| |||||||||||||||||||||
| Txdsl2ExtPMChCurrTable | 1.3.6.1.4.1.890.1.5.13.13.17.6.7 | NA | |||||||||||||||||||
table · not-accessible · current The table xdsl2ExtPMChCurrTable extends xdsl2PMChCurrTable. | |||||||||||||||||||||
| Rxdsl2ExtPMChCurrEntry | 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1 | NA | |||||||||||||||||||
row · not-accessible · current The table xdsl2ExtPMChCurrTable extends xdsl2PMChCurrTable.
| |||||||||||||||||||||
| Cxdsl2PMChCurr15MUncorrectBlocks | 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Performance channel uncorrected blocks. | |||||||||||||||||||||
| Cxdsl2PMChCurr15MRtxCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Performance channel Rtx code word. | |||||||||||||||||||||
| Cxdsl2PMChCurr15MRtxCorrectedCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Performance channel Rtx corrected code word. | |||||||||||||||||||||
| Cxdsl2PMChCurr15MRtxUnorrectedCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Performance channel Rtx uncorrected code word. | |||||||||||||||||||||
| Cxdsl2PMChCurr1DayUncorrectBlocks | 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1.5 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Performance channel uncorrected blocks. | |||||||||||||||||||||
| Cxdsl2PMChCurr1DayRtxCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1.6 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Performance channel Rtx code word. | |||||||||||||||||||||
| Cxdsl2PMChCurr1DayRtxCorrectedCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1.7 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Performance channel Rtx corrected code word. | |||||||||||||||||||||
| Cxdsl2PMChCurr1DayRtxUnorrectedCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1.8 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Performance channel Rtx uncorrected code word. | |||||||||||||||||||||
| Txdsl2ExtPMChHist15MinTable | 1.3.6.1.4.1.890.1.5.13.13.17.6.8 | NA | |||||||||||||||||||
table · not-accessible · current The table xdsl2ExtPMChHist15MinTable extends xdsl2PMChHist15MinTable. | |||||||||||||||||||||
| Rxdsl2ExtPMChHist15MinEntry | 1.3.6.1.4.1.890.1.5.13.13.17.6.8.1 | NA | |||||||||||||||||||
row · not-accessible · current The table xdsl2ExtPMChHist15MinTable extends xdsl2PMChHist15MinTable. | |||||||||||||||||||||
| Cxdsl2PMChHist15MUncorrectBlocks | 1.3.6.1.4.1.890.1.5.13.13.17.6.8.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Performance channel uncorrected blocks. | |||||||||||||||||||||
| Cxdsl2PMChHist15MRtxCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.8.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Performance channel Rtx code word. | |||||||||||||||||||||
| Cxdsl2PMChHist15MRtxCorrectedCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.8.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Performance channel Rtx corrected code word. | |||||||||||||||||||||
| Cxdsl2PMChHist15MRtxUncorrectedCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.8.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Performance channel Rtx uncorrected code word. | |||||||||||||||||||||
| Txdsl2ExtPMChHist1DayTable | 1.3.6.1.4.1.890.1.5.13.13.17.6.9 | NA | |||||||||||||||||||
table · not-accessible · current The table xdsl2ExtPMChHist1DayTable extends xdsl2PMChHist1DayTable. | |||||||||||||||||||||
| Rxdsl2ExtPMChHist1DayEntry | 1.3.6.1.4.1.890.1.5.13.13.17.6.9.1 | NA | |||||||||||||||||||
row · not-accessible · current The table xdsl2ExtPMChHist1DayTable extends xdsl2PMChHist1DayTable. | |||||||||||||||||||||
| Cxdsl2PMChHist1DayUncorrectBlocks | 1.3.6.1.4.1.890.1.5.13.13.17.6.9.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Performance channel uncorrected blocks. | |||||||||||||||||||||
| Cxdsl2PMChHist1DayRtxCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.9.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Performance channel Rtx code word. | |||||||||||||||||||||
| Cxdsl2PMChHist1DayRtxCorrectedCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.9.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Performance channel Rtx corrected code word. | |||||||||||||||||||||
| Cxdsl2PMChHist1DayRtxUncorrectedCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.9.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Performance channel Rtx uncorrected code word. | |||||||||||||||||||||
| Ngvector | 1.3.6.1.4.1.890.1.5.13.13.17.7 | ||||||||||||||||||||
| TgvectorModeTable | 1.3.6.1.4.1.890.1.5.13.13.17.7.2 | NA | |||||||||||||||||||
table · not-accessible · current A table containing the G.Vector information for each VDSL cards. | |||||||||||||||||||||
| RgvectorModeEntry | 1.3.6.1.4.1.890.1.5.13.13.17.7.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry of gvectorModeTable. The index is slotModuleId.
| |||||||||||||||||||||
| CgvectorMode | 1.3.6.1.4.1.890.1.5.13.13.17.7.2.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configure G.Vector mode for each VDSL cards. blv supports all types of chassis. slv is not supported on IES4204 only. dlv is supported on IES4204 only.
| |||||||||||||||||||||
| CrunningGvectorMode | 1.3.6.1.4.1.890.1.5.13.13.17.7.2.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Current running G.Vector mode of each VDSL cards.
| |||||||||||||||||||||
| Nldm | 1.3.6.1.4.1.890.1.5.13.13.17.8 | ||||||||||||||||||||
| SldmTarget | 1.3.6.1.4.1.890.1.5.13.13.17.8.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current IfIndex of the port which would be performed ldm test. | |||||||||||||||||||||
| SldmOps | 1.3.6.1.4.1.890.1.5.13.13.17.8.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The manager sets the object to 1 to start the ldm test and the agent clears the object to zero when ldm test is successfully completed. | |||||||||||||||||||||
| SldmStatus | 1.3.6.1.4.1.890.1.5.13.13.17.8.3 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current Status description of ldm test result. | |||||||||||||||||||||
| SldmAtucLoopAttenuation | 1.3.6.1.4.1.890.1.5.13.13.17.8.4 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current Loop Attenuation.
| |||||||||||||||||||||
| SldmAtucSignalAttenuation | 1.3.6.1.4.1.890.1.5.13.13.17.8.5 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current Signal Attenuation.
| |||||||||||||||||||||
| SldmAtucSignalMargin | 1.3.6.1.4.1.890.1.5.13.13.17.8.6 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current Signal Margin.
| |||||||||||||||||||||
| SldmAtucAggregateTxPower | 1.3.6.1.4.1.890.1.5.13.13.17.8.7 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Actual Aggregate Transmit Power.
| |||||||||||||||||||||
| SldmAtucAttainableBitRate | 1.3.6.1.4.1.890.1.5.13.13.17.8.8 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Attainable Bit Rate.
| |||||||||||||||||||||
| SldmAturLoopAttenuation | 1.3.6.1.4.1.890.1.5.13.13.17.8.9 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current Loop Attenuation.
| |||||||||||||||||||||
| SldmAturSignalAttenuation | 1.3.6.1.4.1.890.1.5.13.13.17.8.10 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current Signal Attenuation.
| |||||||||||||||||||||
| SldmAturSignalMargin | 1.3.6.1.4.1.890.1.5.13.13.17.8.11 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current Signal Margin.
| |||||||||||||||||||||
| SldmAturAggregateTxPower | 1.3.6.1.4.1.890.1.5.13.13.17.8.12 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Actual Aggregate Transmit Power.
| |||||||||||||||||||||
| SldmAturAttainableBitRate | 1.3.6.1.4.1.890.1.5.13.13.17.8.13 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current Attainable Bit Rate.
| |||||||||||||||||||||
| SldmAtucNumOfSubcarriersPerPort | 1.3.6.1.4.1.890.1.5.13.13.17.8.14 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The number of subcarriers per port for ATU-C. | |||||||||||||||||||||
| SldmAturNumOfSubcarriersPerPort | 1.3.6.1.4.1.890.1.5.13.13.17.8.15 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The number of subcarriers per port for ATU-R. | |||||||||||||||||||||
| SldmAtucHlinScale | 1.3.6.1.4.1.890.1.5.13.13.17.8.16 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Scale of Hlin. | |||||||||||||||||||||
| SldmAtucHlinReal1 | 1.3.6.1.4.1.890.1.5.13.13.17.8.17 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The object provides real part of Hlin for the first 256 subcarriers. Each subcarrier takes two octets to store the value. | |||||||||||||||||||||
| SldmAtucHlinReal2 | 1.3.6.1.4.1.890.1.5.13.13.17.8.18 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The object provides real part of Hlin for the last 256 subcarriers. Each subcarrier takes two octets to store the value. | |||||||||||||||||||||
| SldmAtucHlinImage1 | 1.3.6.1.4.1.890.1.5.13.13.17.8.19 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The object provides image part of Hlin for the first 256 subcarriers. Each subcarrier takes two octets to store the value. | |||||||||||||||||||||
| SldmAtucHlinImage2 | 1.3.6.1.4.1.890.1.5.13.13.17.8.20 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The object provides image part of Hlin for the last 256 subcarriers. Each subcarrier takes two octets to store the value. | |||||||||||||||||||||
| SldmAtucHlog1 | 1.3.6.1.4.1.890.1.5.13.13.17.8.21 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The object provides Hlog for the first 256 subcarriers. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measurement could be done for the sub-carrier group. | |||||||||||||||||||||
| SldmAtucHlog2 | 1.3.6.1.4.1.890.1.5.13.13.17.8.22 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The object provides Hlog for the last 256 subcarriers. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measurement could be done for the sub-carrier group. | |||||||||||||||||||||
| SldmAtucQln1 | 1.3.6.1.4.1.890.1.5.13.13.17.8.23 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The object provides QLN for the first 256 subcarriers. Each subcarrier takes two octets to store the value. A special value 0 indicates that no measurement could be done for the sub-carrier group. | |||||||||||||||||||||
| SldmAtucQln2 | 1.3.6.1.4.1.890.1.5.13.13.17.8.24 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The object provides QLN for the last 256 subcarriers. Each subcarrier takes two octets to store the value. A special value 0 indicates that no measurement could be done for the sub-carrier group. | |||||||||||||||||||||
| SldmAtucSnr1 | 1.3.6.1.4.1.890.1.5.13.13.17.8.25 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The object provides SNR for the first 256 subcarriers. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measurement could be done for the sub-carrier group. | |||||||||||||||||||||
| SldmAtucSnr2 | 1.3.6.1.4.1.890.1.5.13.13.17.8.26 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current The object provides SNR for the last 256 subcarriers. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measurement could be done for the sub-carrier group. | |||||||||||||||||||||
| SldmAturHlinScale | 1.3.6.1.4.1.890.1.5.13.13.17.8.27 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Scale of Hlin. | |||||||||||||||||||||
| SldmAturHlinReal | 1.3.6.1.4.1.890.1.5.13.13.17.8.28 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current Real part of Hlin. Each subcarrier takes two octets to store the value. | |||||||||||||||||||||
| SldmAturHlinImage | 1.3.6.1.4.1.890.1.5.13.13.17.8.29 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current Image part of Hlin. Each subcarrier takes two octets to store the value. | |||||||||||||||||||||
| SldmAturHlog | 1.3.6.1.4.1.890.1.5.13.13.17.8.30 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current Hlog of subcarrier. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measurement could be done for the sub-carrier group. | |||||||||||||||||||||
| SldmAturQln | 1.3.6.1.4.1.890.1.5.13.13.17.8.31 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current QLN of subcarrier. Each subcarrier takes two octets to store the value. A special value 0 indicates that no measurement could be done for the sub-carrier group. | |||||||||||||||||||||
| SldmAturSnr | 1.3.6.1.4.1.890.1.5.13.13.17.8.32 | OCTET STRING | RO | ||||||||||||||||||
scalar · OCTET STRING · read-only · current SNR of subcarrier. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measurement could be done for the sub-carrier group. | |||||||||||||||||||||
| Npintransform | 1.3.6.1.4.1.890.1.5.13.13.17.9 | ||||||||||||||||||||
| TpinTransFormModeTable | 1.3.6.1.4.1.890.1.5.13.13.17.9.1 | NA | |||||||||||||||||||
table · not-accessible · current A table containing the PIN to port mapping for each VDSL cards. | |||||||||||||||||||||
| RpinTransFormModeEntry | 1.3.6.1.4.1.890.1.5.13.13.17.9.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry of pinTransFormModeTable. The index is slotModuleId.
| |||||||||||||||||||||
| CpinTransFormMode | 1.3.6.1.4.1.890.1.5.13.13.17.9.1.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configure PIN to port mapping for each VDSL cards.
| |||||||||||||||||||||
| NseltCalibration | 1.3.6.1.4.1.890.1.5.13.13.17.10 | ||||||||||||||||||||
| SseltCalibrationTarget | 1.3.6.1.4.1.890.1.5.13.13.17.10.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current IfIndex of the port which would be performed selt calibration test. | |||||||||||||||||||||
| SseltCalibrationOps | 1.3.6.1.4.1.890.1.5.13.13.17.10.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The manager sets the object to 1 to start the selt calibration and the agent clears the object to zero when selt is not in progress. | |||||||||||||||||||||
| SseltCalibrationFrontEndDelay | 1.3.6.1.4.1.890.1.5.13.13.17.10.3 | INTEGER | RO | ||||||||||||||||||
| SseltCalibrationFrontEndGain | 1.3.6.1.4.1.890.1.5.13.13.17.10.4 | INTEGER | RO | ||||||||||||||||||
| SseltCalibrationShortSeltDelay | 1.3.6.1.4.1.890.1.5.13.13.17.10.5 | INTEGER | RO | ||||||||||||||||||
| SseltCalibrationGain1 | 1.3.6.1.4.1.890.1.5.13.13.17.10.6 | INTEGER | RO | ||||||||||||||||||
| SseltCalibrationGain2 | 1.3.6.1.4.1.890.1.5.13.13.17.10.7 | INTEGER | RO | ||||||||||||||||||
| SseltCalibrationL0 | 1.3.6.1.4.1.890.1.5.13.13.17.10.8 | INTEGER | RO | ||||||||||||||||||
| NvdslInmCounter | 1.3.6.1.4.1.890.1.5.13.13.17.11 | ||||||||||||||||||||
| TvdslInmCountCurrent | 1.3.6.1.4.1.890.1.5.13.13.17.11.1 | NA | |||||||||||||||||||
table · not-accessible · current Displays current DSL line status on specified UNI ports line Displays DSL detail line information on specified | |||||||||||||||||||||
| RvdslInmCountCurrentEntry | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1 | NA | |||||||||||||||||||
row · not-accessible · current an entry displays current DSL line status on specified UNI ports line Displays DSL detail line information on specified, when vdslInmCountUnit is 1 mean xtuc, 2 mean xtur
| |||||||||||||||||||||
| CvdslInmCountCurEQINP1 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP1 | |||||||||||||||||||||
| CvdslInmCountCurEQINP2 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP2 | |||||||||||||||||||||
| CvdslInmCountCurEQINP3 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP3 | |||||||||||||||||||||
| CvdslInmCountCurEQINP4 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP4 | |||||||||||||||||||||
| CvdslInmCountCurEQINP5 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.5 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP5 | |||||||||||||||||||||
| CvdslInmCountCurEQINP6 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.6 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP6 | |||||||||||||||||||||
| CvdslInmCountCurEQINP7 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.7 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP7 | |||||||||||||||||||||
| CvdslInmCountCurEQINP8 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.8 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP8 | |||||||||||||||||||||
| CvdslInmCountCurEQINP9 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.9 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP9 | |||||||||||||||||||||
| CvdslInmCountCurEQINP10 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.10 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP10 | |||||||||||||||||||||
| CvdslInmCountCurEQINP11 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.11 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP11 | |||||||||||||||||||||
| CvdslInmCountCurEQINP12 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.12 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP12 | |||||||||||||||||||||
| CvdslInmCountCurEQINP13 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.13 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP13 | |||||||||||||||||||||
| CvdslInmCountCurEQINP14 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.14 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP14 | |||||||||||||||||||||
| CvdslInmCountCurEQINP15 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.15 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP15 | |||||||||||||||||||||
| CvdslInmCountCurEQINP16 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.16 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP16 | |||||||||||||||||||||
| CvdslInmCountCurEQINP17 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.17 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP17 | |||||||||||||||||||||
| CvdslInmCountCurIAT0 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.18 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current IAT0 | |||||||||||||||||||||
| CvdslInmCountCurIAT1 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.19 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current IAT1 | |||||||||||||||||||||
| CvdslInmCountCurIAT2 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.20 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current IAT2 | |||||||||||||||||||||
| CvdslInmCountCurIAT3 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.21 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current IAT3 | |||||||||||||||||||||
| CvdslInmCountCurIAT4 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.22 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current IAT4 | |||||||||||||||||||||
| CvdslInmCountCurIAT5 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.23 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current IAT5 | |||||||||||||||||||||
| CvdslInmCountCurIAT6 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.24 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current IAT6 | |||||||||||||||||||||
| CvdslInmCountCurIAT7 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.25 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current IAT7 | |||||||||||||||||||||
| CvdslInmCountCurSYMBOLS | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.26 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current SYMBOLS | |||||||||||||||||||||
| TvdslInmCount15min | 1.3.6.1.4.1.890.1.5.13.13.17.11.2 | NA | |||||||||||||||||||
table · not-accessible · current Displays 15-min DSL line status on specified UNI ports line Displays DSL detail line information on specified | |||||||||||||||||||||
| RvdslInmCount15minEntry | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1 | NA | |||||||||||||||||||
row · not-accessible · current an entry displays 15-min DSL line status on specified UNI ports line Displays DSL detail line information on specified, when vdslInmCountUnit is 1 mean xtuc, 2 mean xtur, bucket 0 mean current 15 min
| |||||||||||||||||||||
| CvdslInmCount15minEQINP1 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP1 | |||||||||||||||||||||
| CvdslInmCount15minEQINP2 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP2 | |||||||||||||||||||||
| CvdslInmCount15minEQINP3 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP3 | |||||||||||||||||||||
| CvdslInmCount15minEQINP4 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP4 | |||||||||||||||||||||
| CvdslInmCount15minEQINP5 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.5 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP5 | |||||||||||||||||||||
| CvdslInmCount15minEQINP6 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.6 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP6 | |||||||||||||||||||||
| CvdslInmCount15minEQINP7 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.7 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP7 | |||||||||||||||||||||
| CvdslInmCount15minEQINP8 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.8 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP8 | |||||||||||||||||||||
| CvdslInmCount15minEQINP9 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.9 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP9 | |||||||||||||||||||||
| CvdslInmCount15minEQINP10 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.10 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP10 | |||||||||||||||||||||
| CvdslInmCount15minEQINP11 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.11 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP11 | |||||||||||||||||||||
| CvdslInmCount15minEQINP12 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.12 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP12 | |||||||||||||||||||||
| CvdslInmCount15minEQINP13 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.13 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP13 | |||||||||||||||||||||
| CvdslInmCount15minEQINP14 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.14 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP14 | |||||||||||||||||||||
| CvdslInmCount15minEQINP15 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.15 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP15 | |||||||||||||||||||||
| CvdslInmCount15minEQINP16 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.16 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP16 | |||||||||||||||||||||
| CvdslInmCount15minEQINP17 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.17 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP17 | |||||||||||||||||||||
| CvdslInmCount15minIAT0 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.18 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current IAT0 | |||||||||||||||||||||
| CvdslInmCount15minIAT1 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.19 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current IAT1 | |||||||||||||||||||||
| CvdslInmCount15minIAT2 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.20 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current IAT2 | |||||||||||||||||||||
| CvdslInmCount15minIAT3 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.21 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current IAT3 | |||||||||||||||||||||
| CvdslInmCount15minIAT4 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.22 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current IAT4 | |||||||||||||||||||||
| CvdslInmCount15minIAT5 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.23 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current IAT5 | |||||||||||||||||||||
| CvdslInmCount15minIAT6 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.24 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current IAT6 | |||||||||||||||||||||
| CvdslInmCount15minIAT7 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.25 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current IAT7 | |||||||||||||||||||||
| CvdslInmCount15minSYMBOLS | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.26 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current SYMBOLS | |||||||||||||||||||||
| TvdslInmCount1day | 1.3.6.1.4.1.890.1.5.13.13.17.11.3 | NA | |||||||||||||||||||
table · not-accessible · current Displays 1-day DSL line status on specified UNI ports line Displays DSL detail line information on specified | |||||||||||||||||||||
| RvdslInmCount1dayEntry | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1 | NA | |||||||||||||||||||
row · not-accessible · current an entry displays 1-day DSL line status on specified UNI ports line Displays DSL detail line information on specified, when vdslInmCountUnit is 1 mean xtuc, 2 mean xtur. bucket 0 mean current 1day
| |||||||||||||||||||||
| CvdslInmCount1dayEQINP1 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP1 | |||||||||||||||||||||
| CvdslInmCount1dayEQINP2 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP2 | |||||||||||||||||||||
| CvdslInmCount1dayEQINP3 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP3 | |||||||||||||||||||||
| CvdslInmCount1dayEQINP4 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP4 | |||||||||||||||||||||
| CvdslInmCount1dayEQINP5 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.5 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP5 | |||||||||||||||||||||
| CvdslInmCount1dayEQINP6 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.6 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP6 | |||||||||||||||||||||
| CvdslInmCount1dayEQINP7 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.7 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP7 | |||||||||||||||||||||
| CvdslInmCount1dayEQINP8 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.8 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP8 | |||||||||||||||||||||
| CvdslInmCount1dayEQINP9 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.9 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP9 | |||||||||||||||||||||
| CvdslInmCount1dayEQINP10 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.10 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP10 | |||||||||||||||||||||
| CvdslInmCount1dayEQINP11 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.11 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP11 | |||||||||||||||||||||
| CvdslInmCount1dayEQINP12 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.12 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP12 | |||||||||||||||||||||
| CvdslInmCount1dayEQINP13 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.13 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP13 | |||||||||||||||||||||
| CvdslInmCount1dayEQINP14 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.14 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP14 | |||||||||||||||||||||
| CvdslInmCount1dayEQINP15 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.15 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP15 | |||||||||||||||||||||
| CvdslInmCount1dayEQINP16 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.16 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP16 | |||||||||||||||||||||
| CvdslInmCount1dayEQINP17 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.17 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current EQINP17 | |||||||||||||||||||||
| CvdslInmCount1dayIAT0 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.18 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current IAT0 | |||||||||||||||||||||
| CvdslInmCount1dayIAT1 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.19 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current IAT1 | |||||||||||||||||||||
| CvdslInmCount1dayIAT2 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.20 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current IAT2 | |||||||||||||||||||||
| CvdslInmCount1dayIAT3 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.21 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current IAT3 | |||||||||||||||||||||
| CvdslInmCount1dayIAT4 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.22 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current IAT4 | |||||||||||||||||||||
| CvdslInmCount1dayIAT5 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.23 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current IAT5 | |||||||||||||||||||||
| CvdslInmCount1dayIAT6 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.24 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current IAT6 | |||||||||||||||||||||
| CvdslInmCount1dayIAT7 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.25 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current IAT7 | |||||||||||||||||||||
| CvdslInmCount1daySYMBOLS | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.26 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current SYMBOLS | |||||||||||||||||||||
| NxturInfo | 1.3.6.1.4.1.890.1.5.13.13.17.12 | ||||||||||||||||||||
| TxturInfoTable | 1.3.6.1.4.1.890.1.5.13.13.17.12.1 | NA | |||||||||||||||||||
table · not-accessible · current xtur info table | |||||||||||||||||||||
| RxturInfoEntry | 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CxturInfoHsCountryCode | 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1.1 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Displays XTUR HS country code on specific port. | |||||||||||||||||||||
| CxturInfoHsProviderCode | 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Displays XTUR HS provider code on specific port. | |||||||||||||||||||||
| CxturInfoHsVendorInfo | 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Displays XTUR HS vendor info on specific port. | |||||||||||||||||||||
| CxturInfoFeSysCountryCode | 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Displays XTUR FE system country code on specific port. | |||||||||||||||||||||
| CxturInfoFeSysProviderCode | 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Displays XTUR FE system provider code on specific port. | |||||||||||||||||||||
| CxturInfoFeSysVendorInfo | 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Displays XTUR FE system vendor info on specific port. | |||||||||||||||||||||
| CxturInfoFeSysVersion | 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1.7 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Displays XTUR FE system version on specific port. | |||||||||||||||||||||
| CxturInfoFeSysSerial | 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1.8 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Displays XTUR FE system serial number on specific port. | |||||||||||||||||||||
| Ncoa | 1.3.6.1.4.1.890.1.5.13.13.20 | ||||||||||||||||||||
| ScoaConfIssueThreshold | 1.3.6.1.4.1.890.1.5.13.13.20.1 | Unsigned32 (0..100) | RW | ||||||||||||||||||
scalar · Unsigned32 (0..100) · read-write · current CPU overload alarm issue threshold. CPU overload alarm issue threshold should be higher than CPU overload alarm clear threshold. The default one will be 90% CPU load. | |||||||||||||||||||||
| ScoaConfClearThreshold | 1.3.6.1.4.1.890.1.5.13.13.20.2 | Unsigned32 (0..100) | RW | ||||||||||||||||||
scalar · Unsigned32 (0..100) · read-write · current CPU overload alarm clear threshold. CPU overload alarm clear threshold should be lower than CPU overload alarm issue threshold. The default one will be 60% CPU load | |||||||||||||||||||||
| ScoaConfSampleSeconds | 1.3.6.1.4.1.890.1.5.13.13.20.3 | Unsigned32 (1..60) | RW | ||||||||||||||||||
scalar · Unsigned32 (1..60) · read-write · current Sample seconds of cpu overload alarm. The default sample rate is 35 seconds | |||||||||||||||||||||
| ScoaConfAnalyticMethod | 1.3.6.1.4.1.890.1.5.13.13.20.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Analytic method of cpu overload alarm. 'continous(1)' is the default value.
| |||||||||||||||||||||
| Nperformance | 1.3.6.1.4.1.890.1.5.13.13.23 | ||||||||||||||||||||
| NifXExt | 1.3.6.1.4.1.890.1.5.13.13.24 | ||||||||||||||||||||
| TifXExtTable | 1.3.6.1.4.1.890.1.5.13.13.24.8 | NA | |||||||||||||||||||
table · not-accessible · current A table extends IfXTable. | |||||||||||||||||||||
| RifXExtEntry | 1.3.6.1.4.1.890.1.5.13.13.24.8.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry to extend IfXEntry and ifIndex could be 1..24.
| |||||||||||||||||||||
| CifXExtHCInError | 1.3.6.1.4.1.890.1.5.13.13.24.8.1.1 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current Count of error packet received on specified ifterface indexed by ifIndex. | |||||||||||||||||||||
| CifXExtHCInDrop | 1.3.6.1.4.1.890.1.5.13.13.24.8.1.2 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current Count of received packet dropped by specified ifterface indexed by ifIndex. | |||||||||||||||||||||
| CifXExtHCOutError | 1.3.6.1.4.1.890.1.5.13.13.24.8.1.3 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current Count of error packet transmitted on specified ifterface indexed by ifIndex. | |||||||||||||||||||||
| CifXExtHCOutDrop | 1.3.6.1.4.1.890.1.5.13.13.24.8.1.4 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current Count of transmitted packet dropped on specified ifterface indexed by ifIndex. | |||||||||||||||||||||
| NgbondExt | 1.3.6.1.4.1.890.1.5.13.13.25 | ||||||||||||||||||||
| TgBondPortStatExtTable | 1.3.6.1.4.1.890.1.5.13.13.25.1 | NA | |||||||||||||||||||
table · not-accessible · current An extended table of gBondPortStatTable. | |||||||||||||||||||||
| RgBondPortStatExtEntry | 1.3.6.1.4.1.890.1.5.13.13.25.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An extended table of gBondPortStatEntry. ifIndex is 101..148.
| |||||||||||||||||||||
| CgBondPortStatExtStatus | 1.3.6.1.4.1.890.1.5.13.13.25.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current connection status of the G.Bond port.
| |||||||||||||||||||||
| CgBondPortStatExtLastSerialNum | 1.3.6.1.4.1.890.1.5.13.13.25.1.1.2 | PhysAddress (SIZE (5)) | RO | ||||||||||||||||||
column · PhysAddress (SIZE (5)) · read-only · current Last serial bumber is the first 5 bytes of Discovery Code of last connected G.Bond port (GBS). If last G.Bond port do not exist, would return all-zero. | |||||||||||||||||||||
| NgBondTemplate | 1.3.6.1.4.1.890.1.5.13.13.25.2 | ||||||||||||||||||||
| TgBondTemplateTable | 1.3.6.1.4.1.890.1.5.13.13.25.2.1 | NA | |||||||||||||||||||
table · not-accessible · current Table of G.Bond template configuration derived from gBondPortConfTable | |||||||||||||||||||||
| RgBondTemplateEntry | 1.3.6.1.4.1.890.1.5.13.13.25.2.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry of G.Bond template configuration derived from gBondPortConfEntry.
| |||||||||||||||||||||
| CgBondTemplateName | 1.3.6.1.4.1.890.1.5.13.13.25.2.1.1.1 | SnmpAdminString (SIZE (1..31)) | RO | ||||||||||||||||||
column · SnmpAdminString (SIZE (1..31)) · read-only · current G.Bond template name. | |||||||||||||||||||||
| CgBondTemplateThreshLowUpRate | 1.3.6.1.4.1.890.1.5.13.13.25.2.1.1.7 | Unsigned32 (1..10000000) | RC | ||||||||||||||||||
column · Unsigned32 (1..10000000) · read-create · current This object configures the G.Bond port low upstream rate crossing alarm threshold. When the current value of gBondPortStatUpDataRate for this port reaches/drops below or exceeds this threshold, a gBondLowUpRateCrossing notification MAY be generated if enabled by gBondTemplateLowRateCrossingEnable. This object is read-write for the -O subtype G.Bond ports. It is irrelevant for the -R subtypes - attempts to read or change this object for such ports MUST be rejected (in case of SNMP with the error inconsistentValue). This object maps to the TR-159 attribute aGroupthreshLowUpRate.
| |||||||||||||||||||||
| CgBondTemplateThreshLowDnRate | 1.3.6.1.4.1.890.1.5.13.13.25.2.1.1.8 | Unsigned32 (1..10000000) | RC | ||||||||||||||||||
column · Unsigned32 (1..10000000) · read-create · current This object configures the G.Bond port low downstream rate crossing alarm threshold. When the current value of gBondPortStatDnDataRate for this port reaches/drops below or exceeds this threshold, a gBondLowDnRateCrossing notification MAY be generated if enabled by gBondTemplateLowRateCrossingEnable. This object is read-write for the -O subtype G.Bond ports. It is irrelevant for the -R subtypes - attempts to read or change this object for such ports MUST be rejected (in case of SNMP with the error inconsistentValue). This object maps to the TR-159 attribute aGroupThreshDownUpRate.
| |||||||||||||||||||||
| CgBondTemplateLowRateCrossingEnable | 1.3.6.1.4.1.890.1.5.13.13.25.2.1.1.9 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current Indicates whether gBondLowUpRateCrossing and gBondLowDnRateCrossing notifications should be generated for this interface. Value of true(1) indicates that the notifications are enabled. Value of false(2) indicates that the notifications are disabled. This object is read-write for the -O subtype G.Bond ports. It is irrelevant for the -R subtypes - attempts to read or change this object for such ports MUST be rejected (in case of SNMP with the error inconsistentValue). This object maps to the TR-159 attribute aGroupLowRateCrossingEnable. | |||||||||||||||||||||
| CgBondTemplatePmTcaConfProfile | 1.3.6.1.4.1.890.1.5.13.13.25.2.1.1.10 | SnmpAdminString (SIZE (1..32)) | RC | ||||||||||||||||||
column · SnmpAdminString (SIZE (1..32)) · read-create · current The value of this object is the index of the row in the GBS port Alarm Configuration Profile Table for Performance Monitoring Threshold Crossing Alerts - gBondPortAlarmConfProfileTable, which applies to this GBS port. | |||||||||||||||||||||
| CgBondTemplatePmTcaEnable | 1.3.6.1.4.1.890.1.5.13.13.25.2.1.1.11 | TruthValue | RC | ||||||||||||||||||
column · TruthValue · read-create · current Indicates whether gBondPerfTca*Crossing set of notifications should be generated for this interface. Value of true(1) indicates that the notifications are enabled. Value of false(2) indicates that the notifications are disabled. This object maps to the TR-159 attribute aGroupPerfTcaEnable. | |||||||||||||||||||||
| CgBondTemplateRowStatus | 1.3.6.1.4.1.890.1.5.13.13.25.2.1.1.12 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status of the table entry. | |||||||||||||||||||||
| NgBondTemplateOps | 1.3.6.1.4.1.890.1.5.13.13.25.2.3 | ||||||||||||||||||||
| StemplateName | 1.3.6.1.4.1.890.1.5.13.13.25.2.3.1 | SnmpAdminString (SIZE (1..31)) | RW | ||||||||||||||||||
scalar · SnmpAdminString (SIZE (1..31)) · read-write · current Select G.Bond template to be copied. | |||||||||||||||||||||
| SgBondTarget | 1.3.6.1.4.1.890.1.5.13.13.25.2.3.2 | PortList | RW | ||||||||||||||||||
scalar · PortList · read-write · current The target G.Bond interface 101..148 to copy template settings to. | |||||||||||||||||||||
| SgBondOperation | 1.3.6.1.4.1.890.1.5.13.13.25.2.3.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Copy the specified G.Bond template to G.Bond target interfaces. The value will return to '0' when clear operation has done.
| |||||||||||||||||||||
| Nies5206Conformance | 1.3.6.1.4.1.890.1.5.13.13.26 | ||||||||||||||||||||
| Ndot3ad | 1.3.6.1.4.1.890.1.5.13.13.27 | ||||||||||||||||||||
| Tdot3adTable | 1.3.6.1.4.1.890.1.5.13.13.27.1 | NA | |||||||||||||||||||
table · not-accessible · current The table contains 802.3ad configuration. | |||||||||||||||||||||
| Rdot3adEntry | 1.3.6.1.4.1.890.1.5.13.13.27.1.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| Cdot3adGroupId | 1.3.6.1.4.1.890.1.5.13.13.27.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Group ID of 802.3ad function. | |||||||||||||||||||||
| Cdot3adEnable | 1.3.6.1.4.1.890.1.5.13.13.27.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable/disable 802.3ad function.
| |||||||||||||||||||||
| Cdot3adGroupPortList | 1.3.6.1.4.1.890.1.5.13.13.27.1.1.4 | PortList | RW | ||||||||||||||||||
column · PortList · read-write · current The port list which joins the trunking group. | |||||||||||||||||||||
| SlacpPriority | 1.3.6.1.4.1.890.1.5.13.13.27.2 | INTEGER (0..65535) | RW | ||||||||||||||||||
scalar · INTEGER (0..65535) · read-write · current LACP system priority. | |||||||||||||||||||||
| SlacpTimeout | 1.3.6.1.4.1.890.1.5.13.13.27.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The time interval to exchange LACP packets in order to check that the peer port in the trunk group is still up. shorttimeout : 1-sec timeout longtimeout : 30-sec timeout
| |||||||||||||||||||||
| Tdot3adStatusTable | 1.3.6.1.4.1.890.1.5.13.13.27.4 | NA | |||||||||||||||||||
table · not-accessible · current The table contains 802.3ad status. | |||||||||||||||||||||
| Rdot3adStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.27.4.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| Cdot3adStatusGroupId | 1.3.6.1.4.1.890.1.5.13.13.27.4.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The dot3ad status group ID. | |||||||||||||||||||||
| Cdot3adStatusActor | 1.3.6.1.4.1.890.1.5.13.13.27.4.1.2 | PhysAddress (SIZE (6)) | RO | ||||||||||||||||||
column · PhysAddress (SIZE (6)) · read-only · current The dot3ad status of actor | |||||||||||||||||||||
| Cdot3adStatusActorPriority | 1.3.6.1.4.1.890.1.5.13.13.27.4.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The dot3ad status of actor priority. | |||||||||||||||||||||
| Cdot3adStatusActorKey | 1.3.6.1.4.1.890.1.5.13.13.27.4.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The dot3ad status of actor key. | |||||||||||||||||||||
| Cdot3adStatusPartner | 1.3.6.1.4.1.890.1.5.13.13.27.4.1.5 | PhysAddress (SIZE (6)) | RO | ||||||||||||||||||
column · PhysAddress (SIZE (6)) · read-only · current The dot3ad status of remote system of trunking group. | |||||||||||||||||||||
| Cdot3adStatusPartnerPriority | 1.3.6.1.4.1.890.1.5.13.13.27.4.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The dot3ad status of partner priority. | |||||||||||||||||||||
| Cdot3adStatusPartnerKey | 1.3.6.1.4.1.890.1.5.13.13.27.4.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The dot3ad status of partner key. | |||||||||||||||||||||
| Cdot3adStatusLinks | 1.3.6.1.4.1.890.1.5.13.13.27.4.1.8 | DisplayString (SIZE (0..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..31)) · read-only · current The ot3ad status of links port. | |||||||||||||||||||||
| Cdot3adStatusSyncs | 1.3.6.1.4.1.890.1.5.13.13.27.4.1.9 | DisplayString (SIZE (0..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..31)) · read-only · current The ot3ad status of synchronization state. | |||||||||||||||||||||
| Nsyslog | 1.3.6.1.4.1.890.1.5.13.13.29 | ||||||||||||||||||||
| TsyslogServerIpTable | 1.3.6.1.4.1.890.1.5.13.13.29.2 | NA | |||||||||||||||||||
table · not-accessible · current Sets the IP addresses of Syslog managers (stations to send your Syslog message to). You can configure up to four managers. | |||||||||||||||||||||
| RsyslogServerIpEntry | 1.3.6.1.4.1.890.1.5.13.13.29.2.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CsyslogServerIpIndex | 1.3.6.1.4.1.890.1.5.13.13.29.2.1.1 | INTEGER (1..4) | RO | ||||||||||||||||||
column · INTEGER (1..4) · read-only · current Index of Syslog servers | |||||||||||||||||||||
| CsyslogServerIpAddressType | 1.3.6.1.4.1.890.1.5.13.13.29.2.1.2 | InetAddressType | RW | ||||||||||||||||||
column · InetAddressType · read-write · current Syslog server IP address type
| |||||||||||||||||||||
| CsyslogServerIpAddress | 1.3.6.1.4.1.890.1.5.13.13.29.2.1.3 | InetAddress | RW | ||||||||||||||||||
column · InetAddress · read-write · current Syslog server IP address <ipv4-address> 0.0.0.0 ~ 223.255.255.255 <ipv6-address> :: ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff Limit: syslogServerIpAddressType must be set before syslogServerIpAddress. SyslogServerIpAddress set to default value 0.0.0.0, severity will auto set to none | |||||||||||||||||||||
| CsyslogServerIPSeverity | 1.3.6.1.4.1.890.1.5.13.13.29.2.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Severity of Syslog server SyslogServerIpAddress set to default value 0.0.0.0, severity will auto set to none
| |||||||||||||||||||||
| Ncfm | 1.3.6.1.4.1.890.1.5.13.13.30 | ||||||||||||||||||||
| TcfmLoopbackPortTable | 1.3.6.1.4.1.890.1.5.13.13.30.1 | NA | |||||||||||||||||||
table · not-accessible · current A table that contains CFM information. This table is supported by R5.02 and later versions. | |||||||||||||||||||||
| RcfmLoopbackPortEntry | 1.3.6.1.4.1.890.1.5.13.13.30.1.1 | NA | |||||||||||||||||||
| CcfmLoopbackPortState | 1.3.6.1.4.1.890.1.5.13.13.30.1.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current CFM loopback enable/disable on the port.
| |||||||||||||||||||||
| TcfmMIPTable | 1.3.6.1.4.1.890.1.5.13.13.30.2 | NA | |||||||||||||||||||
| RcfmMIPEntry | 1.3.6.1.4.1.890.1.5.13.13.30.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in cfmMIPTable. | |||||||||||||||||||||
| CcfmLevel | 1.3.6.1.4.1.890.1.5.13.13.30.2.1.1 | INTEGER | RO | ||||||||||||||||||
| CcfmVlanID | 1.3.6.1.4.1.890.1.5.13.13.30.2.1.2 | INTEGER | RO | ||||||||||||||||||
| CcfmPort | 1.3.6.1.4.1.890.1.5.13.13.30.2.1.3 | INTEGER | RO | ||||||||||||||||||
| CcfmMIPRowStatus | 1.3.6.1.4.1.890.1.5.13.13.30.2.1.4 | RowStatus | RC | ||||||||||||||||||
| CcfmMIPMacAddress | 1.3.6.1.4.1.890.1.5.13.13.30.2.1.5 | MacAddress | RC | ||||||||||||||||||
column · MacAddress · read-create · current MAC address of maintenance domain intermediate point | |||||||||||||||||||||
| ScfmActionEnableStatus | 1.3.6.1.4.1.890.1.5.13.13.30.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current CFM Action enable status for the CO device
| |||||||||||||||||||||
| ScfmMode | 1.3.6.1.4.1.890.1.5.13.13.30.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The compliant CFM standard
| |||||||||||||||||||||
| ScfmMIPRespondMcastLbm | 1.3.6.1.4.1.890.1.5.13.13.30.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The status indicate whether a MIP respond to mulcast lbms or not.
| |||||||||||||||||||||
| ScfmLoopbackTimeout | 1.3.6.1.4.1.890.1.5.13.13.30.6 | INTEGER (1..86400) | RW | ||||||||||||||||||
scalar · INTEGER (1..86400) · read-write · current CFM loopback timeout value. | |||||||||||||||||||||
| TcfmLbrTable | 1.3.6.1.4.1.890.1.5.13.13.30.7 | NA | |||||||||||||||||||
table · not-accessible · current This table contains a list of Loopback replies received by a specific MEP in response to a loopback message. | |||||||||||||||||||||
| RcfmLbrEntry | 1.3.6.1.4.1.890.1.5.13.13.30.7.1 | NA | |||||||||||||||||||
row · not-accessible · current The Loopback Reply table entry. | |||||||||||||||||||||
| CcfmLbrSeqNumber | 1.3.6.1.4.1.890.1.5.13.13.30.7.1.1 | Unsigned32 (0..4294967295) | NA | ||||||||||||||||||
column · Unsigned32 (0..4294967295) · not-accessible · current Transaction identifier/Sequence number returned by a previous transmit loopback message command, indicating which LBM's response is going to be returned. | |||||||||||||||||||||
| CcfmLbrReceiveOrder | 1.3.6.1.4.1.890.1.5.13.13.30.7.1.2 | Unsigned32 (0..4294967295) | NA | ||||||||||||||||||
column · Unsigned32 (0..4294967295) · not-accessible · current An index to distinguish among multiple LBRs with the same LBR Transaction Identifier field value. cfmLbrReceiveOrder are assigned sequentially from 1, in the order that the Loopback Initiator received the LBRs. | |||||||||||||||||||||
| CcfmLbrSrcMac | 1.3.6.1.4.1.890.1.5.13.13.30.7.1.3 | MacAddress | RO | ||||||||||||||||||
column · MacAddress · read-only · current Source MAC address returned in the LBR. | |||||||||||||||||||||
| Ngpon | 1.3.6.1.4.1.890.1.5.13.13.31 | ||||||||||||||||||||
| NponTable | 1.3.6.1.4.1.890.1.5.13.13.31.1 | ||||||||||||||||||||
| TponSetupTable | 1.3.6.1.4.1.890.1.5.13.13.31.1.1 | NA | |||||||||||||||||||
| RponSetupEntry | 1.3.6.1.4.1.890.1.5.13.13.31.1.1.1 | NA | |||||||||||||||||||
| CtransceiverTxDisable | 1.3.6.1.4.1.890.1.5.13.13.31.1.1.1.1 | EnabledStatus | RW | ||||||||||||||||||
column · EnabledStatus · read-write · current transceiver tx disable | |||||||||||||||||||||
| CinO7State | 1.3.6.1.4.1.890.1.5.13.13.31.1.1.1.2 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current ONT Enter Emergency Stop State(07), input serial number | |||||||||||||||||||||
| CoutO7State | 1.3.6.1.4.1.890.1.5.13.13.31.1.1.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current ONT Leave Emergency Stop State(07), input serial number | |||||||||||||||||||||
| ClinkState | 1.3.6.1.4.1.890.1.5.13.13.31.1.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Show PON link state
| |||||||||||||||||||||
| TponConfigTable | 1.3.6.1.4.1.890.1.5.13.13.31.1.2 | NA | |||||||||||||||||||
| RponConfigEntry | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1 | NA | |||||||||||||||||||
| CtransceiverType | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current transceiver Type
| |||||||||||||||||||||
| CregisterMethod | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current register Method
| |||||||||||||||||||||
| CponConfigRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.3 | RowStatus | RC | ||||||||||||||||||
| CtemplateOption | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.4 | INTEGER (125..128) | RW | ||||||||||||||||||
column · INTEGER (125..128) · read-write · current template-option | |||||||||||||||||||||
| CdsFecMode | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.5 | EnabledStatus | RW | ||||||||||||||||||
column · EnabledStatus · read-write · current Enable/disable PON downstream FEC mode | |||||||||||||||||||||
| CtcaFecCorrByteThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.6 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current TCA FEC corrected byte threshold | |||||||||||||||||||||
| CtcaFecCorrCodeWordThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.7 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current TCA FEC corrected code word threshold | |||||||||||||||||||||
| CtcaFecUncorrCodeWordThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.8 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current TCA FEC uncorrected code word threshold | |||||||||||||||||||||
| CtcaBipErrThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.9 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current TCA BIP error threshold | |||||||||||||||||||||
| CtcaReiCounterThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.10 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current TCA REI counter threshold | |||||||||||||||||||||
| CrangingMax | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.12 | INTEGER (20..60) | RW | ||||||||||||||||||
column · INTEGER (20..60) · read-write · current The maximum of PON ranging distance in km | |||||||||||||||||||||
| CtcaFecCodeWordErrThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.13 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current TCA FEC code word threshold | |||||||||||||||||||||
| CtcaBipByteThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.14 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current TCA BIP byte threshold | |||||||||||||||||||||
| CtcaRxPloamCrcErrThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.15 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current TCA rx ploam crc error threshold | |||||||||||||||||||||
| CtcaRxPloamNonIdleThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.16 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current TCA rx ploam non idle threshold | |||||||||||||||||||||
| CtcaPositiveDriftThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.17 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current TCA positive drift threshold | |||||||||||||||||||||
| CtcaNegativeDriftThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.18 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current TCA negative drift threshold | |||||||||||||||||||||
| CtcaRxOmciPacketCrcErrThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.19 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current TCA rx omci crc error threshold | |||||||||||||||||||||
| CtcaUnrecievedBurstThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.20 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current TCA unreceived burst threshold | |||||||||||||||||||||
| CtcaLcdgiErrThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.21 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current TCA lcdgi error threshold | |||||||||||||||||||||
| CtcaRdiErrThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.22 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current TCA rdi error threshold | |||||||||||||||||||||
| CtcaRxOmciThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.23 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current TCA rx omci threshold | |||||||||||||||||||||
| CtmplateAction | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.24 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable or disable the ONT template action of the PON port.
| |||||||||||||||||||||
| TunregisterOntTable | 1.3.6.1.4.1.890.1.5.13.13.31.1.3 | NA | |||||||||||||||||||
| RunregisterOntEntry | 1.3.6.1.4.1.890.1.5.13.13.31.1.3.1 | NA | |||||||||||||||||||
| CunregisterOntSerialNumber | 1.3.6.1.4.1.890.1.5.13.13.31.1.3.1.1 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current unregisterOnt Serial Number | |||||||||||||||||||||
| CunregisterOntPassword | 1.3.6.1.4.1.890.1.5.13.13.31.1.3.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current unregisterOnt password | |||||||||||||||||||||
| CunregisterOntStatus | 1.3.6.1.4.1.890.1.5.13.13.31.1.3.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current unregisterOnt Status
| |||||||||||||||||||||
| CunregisterOntIndex | 1.3.6.1.4.1.890.1.5.13.13.31.1.3.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current unregisterOnt Ont Index | |||||||||||||||||||||
| TponProtectionTable | 1.3.6.1.4.1.890.1.5.13.13.31.1.4 | NA | |||||||||||||||||||
| RponProtectionEntry | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1 | NA | |||||||||||||||||||
| CpassivePort | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current The passive port of this protection pair. | |||||||||||||||||||||
| CcurrWorkingPort | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current working port. System is trying to bring up ONU at this port.
| |||||||||||||||||||||
| CcurrStandbyPort | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current standby port. After a switch-over event occurs, it will be the next working port.
| |||||||||||||||||||||
| CdelimiterDetectedOnStandbyPort | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current It indicates whether the current standby port can detect delimiter on the PON fiber. true(1) indicates at least one delimiter is detected when user query this MIB, false(2) indicates no delimiter is detected.
| |||||||||||||||||||||
| ClastSwitchOverReason | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current It indicates the reason causes the last switch-over event. noData(0) indicates no switch-over event happened. lossOfSignal(1) indicates LOS happened on the working port. manual(2) indicates administrator triggered it manully. chipConnectionFailure(3) indicates system lost the connection to the GPON chip. noOnuDetected(4) indicates no ONU detected at working port.
| |||||||||||||||||||||
| ClastSwitchOverTimeStampYear | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current It indicates the year the last switch-over event happened. | |||||||||||||||||||||
| ClastSwitchOverTimeStampMonth | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current It indicates the month the last switch-over event happened. | |||||||||||||||||||||
| ClastSwitchOverTimeStampDay | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current It indicates the day the last switch-over event happened. | |||||||||||||||||||||
| ClastSwitchOverTimeStampHour | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current It indicates the hour the last switch-over event happened. | |||||||||||||||||||||
| ClastSwitchOverTimeStampMinute | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current It indicates the minute the last switch-over event happened. | |||||||||||||||||||||
| ClastSwitchOverTimeStampSecond | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current It indicates the second the last switch-over event happened. | |||||||||||||||||||||
| CswitchOverTimes | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.12 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current It indicates the times of switch-over event happened since the protection pair was activated. | |||||||||||||||||||||
| CprotectSwitchPonRowstatus | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.13 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row Status for a protection pair. | |||||||||||||||||||||
| TponRogueOnuTable | 1.3.6.1.4.1.890.1.5.13.13.31.1.5 | NA | |||||||||||||||||||
| RponRogueOnuEntry | 1.3.6.1.4.1.890.1.5.13.13.31.1.5.1 | NA | |||||||||||||||||||
| CrogueDetect | 1.3.6.1.4.1.890.1.5.13.13.31.1.5.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Start or Stop rogue onu detect
| |||||||||||||||||||||
| NponPortBridge | 1.3.6.1.4.1.890.1.5.13.13.31.1.6 | ||||||||||||||||||||
| SponPortBridgeState | 1.3.6.1.4.1.890.1.5.13.13.31.1.6.1 | EnabledStatus | RW | ||||||||||||||||||
| TponPortBridgePortTable | 1.3.6.1.4.1.890.1.5.13.13.31.1.6.2 | NA | |||||||||||||||||||
| RponPortBridgePortEntry | 1.3.6.1.4.1.890.1.5.13.13.31.1.6.2.1 | NA | |||||||||||||||||||
| CponPortBridgePortState | 1.3.6.1.4.1.890.1.5.13.13.31.1.6.2.1.1 | EnabledStatus | RW | ||||||||||||||||||
column · EnabledStatus · read-write · current Port Bridge enabled/disabled on the port. Enable(1) means local switching is allowed in this port. | |||||||||||||||||||||
| NponAntiSpoof | 1.3.6.1.4.1.890.1.5.13.13.31.1.7 | ||||||||||||||||||||
| TponAntiSpoofPortTable | 1.3.6.1.4.1.890.1.5.13.13.31.1.7.1 | NA | |||||||||||||||||||
| RponAntiSpoofPortEntry | 1.3.6.1.4.1.890.1.5.13.13.31.1.7.1.1 | NA | |||||||||||||||||||
| CponAntiSpoofActiveByPort | 1.3.6.1.4.1.890.1.5.13.13.31.1.7.1.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Pon port anti-spoofing enabled/disabled on the port. enabled(1) means local switching is allowed in this port.
| |||||||||||||||||||||
| TponAntiSpoofTable | 1.3.6.1.4.1.890.1.5.13.13.31.1.7.2 | NA | |||||||||||||||||||
| RponAntiSpoofEntry | 1.3.6.1.4.1.890.1.5.13.13.31.1.7.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in ponAngiSpoofTable | |||||||||||||||||||||
| CponAntiSpoofMode | 1.3.6.1.4.1.890.1.5.13.13.31.1.7.2.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Display the entry is inclusive/exclusive for IP/MAC/OUIMAC.
| |||||||||||||||||||||
| CponAntiSpoofSetting | 1.3.6.1.4.1.890.1.5.13.13.31.1.7.2.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Display the IP/MAC/IP&MAC/OUI-MAC setting of the anti-spoofing. | |||||||||||||||||||||
| CponAntiSpoofRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.1.7.2.1.4 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Create or distory a anti-spoofing of a pon port. ex 1: create a inclusiveIp entry with ip 192.168.100.100 on port 1-1, then the key is 10001.1.255.255.255.255.255.255.192.168.100.100 ex 2: create a exclusiveMac entry with mac 00:0A:0B:01:02:03 on port 2-2, then the key is 20002.3.0.10.11.1.2.3.255.255.255.255 ex 3: create a inclusiveOuimac entry with mac 00:0A:0B on port 1-3, then the key is 10003.8.0.10.11.255.255.255.255.255.255.255 | |||||||||||||||||||||
| NponIpsb | 1.3.6.1.4.1.890.1.5.13.13.31.1.8 | ||||||||||||||||||||
| TponIpsbSetupTable | 1.3.6.1.4.1.890.1.5.13.13.31.1.8.1 | NA | |||||||||||||||||||
| RponIpsbSetupEntry | 1.3.6.1.4.1.890.1.5.13.13.31.1.8.1.1 | NA | |||||||||||||||||||
| CipsbSetupMac | 1.3.6.1.4.1.890.1.5.13.13.31.1.8.1.1.1 | PhysAddress | RO | ||||||||||||||||||
| CipsbSetupVid | 1.3.6.1.4.1.890.1.5.13.13.31.1.8.1.1.2 | INTEGER (1..4094) | RO | ||||||||||||||||||
| CipsbSetupIp | 1.3.6.1.4.1.890.1.5.13.13.31.1.8.1.1.3 | IpAddress | RW | ||||||||||||||||||
| CipsbSetupState | 1.3.6.1.4.1.890.1.5.13.13.31.1.8.1.1.4 | RowStatus | RC | ||||||||||||||||||
| Nremote | 1.3.6.1.4.1.890.1.5.13.13.31.2 | ||||||||||||||||||||
| NontSetup | 1.3.6.1.4.1.890.1.5.13.13.31.2.1 | ||||||||||||||||||||
| TontTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1 | NA | |||||||||||||||||||
| RontEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1 | NA | |||||||||||||||||||
| ContNumber | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current ontNumber. | |||||||||||||||||||||
| Cpassword | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.4 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current password. | |||||||||||||||||||||
| CplanVersion | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.5 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current plan-version. | |||||||||||||||||||||
| Csn | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.6 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current serial number. | |||||||||||||||||||||
| CloopbackConfig | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.7 | EnabledStatus | RW | ||||||||||||||||||
column · EnabledStatus · read-write · current enabled/disabled loopback on the port. | |||||||||||||||||||||
| CloopbackStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This entry display latest loopback test status of port while performing remote-ont loopback test.
| |||||||||||||||||||||
| Cmodel | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Model ID.
| |||||||||||||||||||||
| ContRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.10 | RowStatus | RC | ||||||||||||||||||
| ContAction | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.11 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Setting this MIB with value below to request an action to occur for the ONU. 1 Reboot the ONU. 2 Perform a FW version check. If the current version mismatches with planned one, do FW upgrade if possible. 4 Delete all configuration stored in OLT related to the ONU. 5 Perform a file transfer. Download a file located in <ontFileTransferFileUri> with user name / password defined in <ontFileTransferUserName> and <ontFileTransferPassword> to the ONU and rename it to <ontFileTransferLocalFileName>. 6 Perform a file transfer. Upload a file <ontFileTransferLocalFileName> from the ONU to destination defined in <ontFileTransferFileUri> with user name / password defined in <ontFileTransferUserName> and <ontFileTransferPassword>. 7 Switch the ONU active/standby image rule and reboot. 8 Clear the ont upgrade status. This MIB returns following status to a get request. 0 This ONU is not doing any action above. 3 The FW upgrading is in progress.
| |||||||||||||||||||||
| CalarmProfile | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.12 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current apply an alarm profile to configure remote ONT ddmi threshold. | |||||||||||||||||||||
| CfullBridg | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.13 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current full-bridge mode
| |||||||||||||||||||||
| CantiMacSpoofing | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.14 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current anti-mac-spoofing active or inactive
| |||||||||||||||||||||
| CusFecMode | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.15 | EnabledStatus | RW | ||||||||||||||||||
column · EnabledStatus · read-write · current Enable/disable ONU upstream FEC mode | |||||||||||||||||||||
| CtemplateDescription | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.16 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current ONT template description | |||||||||||||||||||||
| TontBwGroupTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.2 | NA | |||||||||||||||||||
| RontBwGroupEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.2.1 | NA | |||||||||||||||||||
| ContBwGroupId | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.2.1.1 | INTEGER (1..31) | NA | ||||||||||||||||||
column · INTEGER (1..31) · not-accessible · current Bandwidth group means US T-CONT (Transmission container)and DS BW meter | |||||||||||||||||||||
| ContBwGroupUstype | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.2.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current US T-CONT type is characterized by the traffic flows.
| |||||||||||||||||||||
| ContBwGroupUsbwprofname | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.2.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current Upstream bandwidth profile name. | |||||||||||||||||||||
| ContBwGroupDsbwprofname | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.2.1.4 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current Downstream bandwidth profile name. | |||||||||||||||||||||
| ContBwGroupRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.2.1.5 | RowStatus | RC | ||||||||||||||||||
| TontFileTransferParamTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.3 | NA | |||||||||||||||||||
| RontFileTransferParamEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.3.1 | NA | |||||||||||||||||||
| ContFileTransferFileUri | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.3.1.1 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current The URL to be used in file transfer. For example: ftp://a.b.c/dir/config.xml | |||||||||||||||||||||
| ContFileTransferLocalFileName | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.3.1.2 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current The file name of the target file in the ONU. For example: config.xml | |||||||||||||||||||||
| ContFileTransferUserName | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.3.1.3 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current The user name to be used for the file transfer. | |||||||||||||||||||||
| ContFileTransferPassword | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.3.1.4 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current The password to be used for the file transfer. | |||||||||||||||||||||
| NontFwUpgrade | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4 | ||||||||||||||||||||
| NontFwUpgradeSetup | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4.1 | ||||||||||||||||||||
| SontImageVersion | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4.1.1 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current ONT image version name. | |||||||||||||||||||||
| SreleaseOntImage | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4.1.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current release ONT image from OLT.
| |||||||||||||||||||||
| SnumOfOntInQueue | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4.1.3 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The number of ONTs in FW upgrade queue. | |||||||||||||||||||||
| TontFwUpgradeTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4.2 | NA | |||||||||||||||||||
| RontFwUpgradeEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4.2.1 | NA | |||||||||||||||||||
| ContFwUpgradeOntNumber | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4.2.1.1 | INTEGER (0..128) | RW | ||||||||||||||||||
column · INTEGER (0..128) · read-write · current Action to start upgrading ONT firmware with specified ONT number 1~128 (the same to ontAction.upgradingFW); 0 means to upgrade all ONTs of a PON port. | |||||||||||||||||||||
| ContFwUpgradeClearStatusPerPon | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4.2.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Cleared all of the ONT upgrade status of the pon port.
| |||||||||||||||||||||
| TontResetTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.5 | NA | |||||||||||||||||||
| RontResetEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.5.1 | NA | |||||||||||||||||||
| ContResetAction | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.5.1.1 | INTEGER (0..1) | RW | ||||||||||||||||||
column · INTEGER (0..1) · read-write · current ont Reset Action,Value 1: Load Factory Default,Value 2: Reset Default | |||||||||||||||||||||
| ContConfgurationStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.5.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current ont Confguration Status.Value 0: In default state | |||||||||||||||||||||
| ContTimeOfRestore | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.5.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Unix time seconds since midnight January 1,1970). | |||||||||||||||||||||
| TontWanConfigTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6 | NA | |||||||||||||||||||
| RontWanConfigEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in ontWanConfigTable
| |||||||||||||||||||||
| ContWanConfigId | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6.1.1 | INTEGER (1..4) | NA | ||||||||||||||||||
column · INTEGER (1..4) · not-accessible · current ont wan config wan id | |||||||||||||||||||||
| ContWanConfigVlan | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current ont wan vlan. | |||||||||||||||||||||
| ContWanConfigPriority | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current ont wan priority. | |||||||||||||||||||||
| ContWanConfigNat | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current ont wan nat config.
| |||||||||||||||||||||
| ContWanConfigUsername | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6.1.5 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current ont wan config user name. | |||||||||||||||||||||
| ContWanConfigPassword | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6.1.6 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current ont wan config password. | |||||||||||||||||||||
| ContWanConfigRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6.1.7 | RowStatus | RC | ||||||||||||||||||
| TontcardTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.2 | NA | |||||||||||||||||||
| RontcardEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.2.1 | NA | |||||||||||||||||||
| Contcard | 1.3.6.1.4.1.890.1.5.13.13.31.2.2.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current ontcard. | |||||||||||||||||||||
| ContcardType | 1.3.6.1.4.1.890.1.5.13.13.31.2.2.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current cardtype.
| |||||||||||||||||||||
| Cnumofport | 1.3.6.1.4.1.890.1.5.13.13.31.2.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current numofport. | |||||||||||||||||||||
| ContcardRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.2.1.4 | RowStatus | RC | ||||||||||||||||||
| ContcardAction | 1.3.6.1.4.1.890.1.5.13.13.31.2.2.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Delete all configurations relating to ontcard.
| |||||||||||||||||||||
| TontenetTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.3 | NA | |||||||||||||||||||
| RontenetEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in ontenetTable
| |||||||||||||||||||||
| ContenetCardPort | 1.3.6.1.4.1.890.1.5.13.13.31.2.3.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current ontenetCardPort. | |||||||||||||||||||||
| CpmenetEnable | 1.3.6.1.4.1.890.1.5.13.13.31.2.3.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current pmenetEnable.
| |||||||||||||||||||||
| CportSpeed | 1.3.6.1.4.1.890.1.5.13.13.31.2.3.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current port-speed.
| |||||||||||||||||||||
| ContenetRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.3.1.4 | RowStatus | RC | ||||||||||||||||||
| ContenetAction | 1.3.6.1.4.1.890.1.5.13.13.31.2.3.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Delete all configurations relating to ontenet.
| |||||||||||||||||||||
| TontvdslTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.4 | NA | |||||||||||||||||||
| RontvdslEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.4.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in ontvdslTable
| |||||||||||||||||||||
| ContvdslCardPort | 1.3.6.1.4.1.890.1.5.13.13.31.2.4.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current ontvdslCardPort. | |||||||||||||||||||||
| ClineTemplate | 1.3.6.1.4.1.890.1.5.13.13.31.2.4.1.2 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current line-template. | |||||||||||||||||||||
| ContvdslRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.4.1.3 | RowStatus | RC | ||||||||||||||||||
| ContvdslAction | 1.3.6.1.4.1.890.1.5.13.13.31.2.4.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Delete all configurations relating to ontvdsl.
| |||||||||||||||||||||
| NontuniportSetup | 1.3.6.1.4.1.890.1.5.13.13.31.2.5 | ||||||||||||||||||||
| TontuniportTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.1 | NA | |||||||||||||||||||
| RontuniportEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.1.1 | NA | |||||||||||||||||||
| CuniPort | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current uniport | |||||||||||||||||||||
| CuniPortRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.1.1.2 | RowStatus | RC | ||||||||||||||||||
| CuniPortAction | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.1.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Delete all configurations relating to uniport.
| |||||||||||||||||||||
| CuniportMacLimit | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.1.1.4 | INTEGER (0..127) | RW | ||||||||||||||||||
column · INTEGER (0..127) · read-write · current maximum number of mac addresses can be learned per uniport. Zero value means mac-limit is inactive and no mac-address limitation. | |||||||||||||||||||||
| TuniportIgmpchannelTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2 | NA | |||||||||||||||||||
| RuniportIgmpchannelEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in igmpchannelTable. | |||||||||||||||||||||
| CuniportIgmpchannelUniSvid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.1 | INTEGER (1..4096) | RO | ||||||||||||||||||
column · INTEGER (1..4096) · read-only · current uni-svid | |||||||||||||||||||||
| CuniportIgmpchannelUniCvid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.2 | INTEGER (1..4094) | RO | ||||||||||||||||||
column · INTEGER (1..4094) · read-only · current uni-cvid | |||||||||||||||||||||
| CuniportIgmpchannelVersion | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current IGMP version
| |||||||||||||||||||||
| CuniportIgmpchannelMaxgroup | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.4 | INTEGER (0..512) | RW | ||||||||||||||||||
column · INTEGER (0..512) · read-write · current Maximum number of groups. | |||||||||||||||||||||
| CuniportIgmpchannelMaxmsg | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.5 | INTEGER (0..255) | RW | ||||||||||||||||||
column · INTEGER (0..255) · read-write · current Maximum number of reports per second. | |||||||||||||||||||||
| CuniportIgmpchannelRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.10 | RowStatus | RC | ||||||||||||||||||
| CuniportIgmpchannelTrafficTxTag | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.11 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Traffic tag on UNI port. If replace(5) is set, then uniportIgmpchannelTrafficTxTagRepVid will be applied.
| |||||||||||||||||||||
| CuniportIgmpchannelCacProf | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.12 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The maximum multicast bandwidth for this channel | |||||||||||||||||||||
| CuniportIgmpchannelTrafficTxTagRepVid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.13 | INTEGER (1..4094) | RW | ||||||||||||||||||
column · INTEGER (1..4094) · read-write · current Replaced downstream VID. It is applied only when uniportIgmpchannelTrafficTxTag is set to replace(5). | |||||||||||||||||||||
| CuniportIgmpchannelGroupPrivProf | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.14 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The group privilege profile this channel wants to apply. If the group privilege profile is set, both previewPkg and fullviewPkg settings will be ignored. | |||||||||||||||||||||
| CuniportIgmpchannelMvlan | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.15 | INTEGER (0..4094) | RW | ||||||||||||||||||
column · INTEGER (0..4094) · read-write · current MVR receive port. It works only when group-privilege-profile is set, 0 means non-MVR. | |||||||||||||||||||||
| TuniportProtoBasedTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.3 | NA | |||||||||||||||||||
| RuniportProtoBasedEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in protocol-basedTable. | |||||||||||||||||||||
| CuniportProtoBasedEtherType | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.3.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current ethernet Type. ipoe(1) pppoe(2) arp(3) ipv6(4)
| |||||||||||||||||||||
| CuniportProtoBasedSvid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.3.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current SVID | |||||||||||||||||||||
| CuniportProtoBasedCvid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.3.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current CVID | |||||||||||||||||||||
| CuniportProtoBasedPriority | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.3.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current priority | |||||||||||||||||||||
| CuniportProtoBasedRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.3.1.5 | RowStatus | RC | ||||||||||||||||||
| TuniportPvidTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.4 | NA | |||||||||||||||||||
| RuniportPvidEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.4.1 | NA | |||||||||||||||||||
| CuniportPvidUniSvid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.4.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current SVID | |||||||||||||||||||||
| CuniportPvidUniCvid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.4.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current CVID | |||||||||||||||||||||
| CuniportPvidPriority | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.4.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Pvid priority | |||||||||||||||||||||
| CuniportPvidRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.4.1.4 | RowStatus | RC | ||||||||||||||||||
| TuniportQueueTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5 | NA | |||||||||||||||||||
| RuniportQueueEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in queueTable.
| |||||||||||||||||||||
| CuniportQueueTc | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current traffic class 0-7
| |||||||||||||||||||||
| CuniportQueuePriority | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Usqueue priority 0-7
| |||||||||||||||||||||
| CuniportQueueWeight | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Usqueue weight 0-255 | |||||||||||||||||||||
| CuniportQueueUsbwprofname | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.4 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current usbwprof name | |||||||||||||||||||||
| CuniportQueueDsbwprofname | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.5 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current dsbwprof name | |||||||||||||||||||||
| CuniportQueueDsoption | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current queue ds option,do metering at OLT side or ONT side
| |||||||||||||||||||||
| CuniportQueueUsbwsharegroupid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current upstream bandwidth group id | |||||||||||||||||||||
| CuniportQueueRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.8 | RowStatus | RC | ||||||||||||||||||
| CuniportQueueDsbwsharegroupid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current downstream bandwidth group id | |||||||||||||||||||||
| TuniportVlanTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6 | NA | |||||||||||||||||||
| RuniportVlanEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in uniportVlanTable. | |||||||||||||||||||||
| CuniportVlanUniSvid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current uni-svid | |||||||||||||||||||||
| CuniportVlanUniCvid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.2 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current uni-cvid | |||||||||||||||||||||
| CuniportVlanNetworkSvid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current network-svid | |||||||||||||||||||||
| CuniportVlanNetworkSpri | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current network-spri
| |||||||||||||||||||||
| CuniportVlanNetworkCvid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current network-cvid | |||||||||||||||||||||
| CuniportVlanIngProf | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.6 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current ingProf | |||||||||||||||||||||
| CuniportVlanGemPort | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current gemPort | |||||||||||||||||||||
| CuniportVlanTr156 | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current tr156
| |||||||||||||||||||||
| CuniportVlanTxTag | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current txtag
| |||||||||||||||||||||
| CuniportVlanPbitProf | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.10 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current pbit profile | |||||||||||||||||||||
| CuniportVlanDscpToPbit | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.11 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current dscp to pbit active/inactive
| |||||||||||||||||||||
| CuniportVlanAesEncrypt | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.12 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current AES encryption
| |||||||||||||||||||||
| CuniportVlanRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.13 | RowStatus | RC | ||||||||||||||||||
| CuniportVlanSharePriority | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.14 | INTEGER (0..8) | RW | ||||||||||||||||||
column · INTEGER (0..8) · read-write · current Share priority. Specify 8 to disable the priority. | |||||||||||||||||||||
| CuniportVlanMacNumber | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.15 | INTEGER (1..6) | RW | ||||||||||||||||||
column · INTEGER (1..6) · read-write · current MAC number. | |||||||||||||||||||||
| TuniportVoipTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7 | NA | |||||||||||||||||||
| RuniportVoipEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1 | NA | |||||||||||||||||||
| CuniportVoipMode | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip mode. It just can be set to sip mode, now.
| |||||||||||||||||||||
| CuniportVoipUniCvid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip vlan(1 ~ 4094). | |||||||||||||||||||||
| CuniportVoipCommProfName | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current set ONT Voip common profile name(1 ~ 15 characters). | |||||||||||||||||||||
| CuniportVoipSipProfName | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.4 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current set ONT Voip sip profile name(1 ~ 15 characters). | |||||||||||||||||||||
| CuniportVoipUsername | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.5 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current set ONT Voip user name(1 ~ 63 characters). | |||||||||||||||||||||
| CuniportVoipPassword | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.6 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current set ONT Voip password(1 ~ 63 characters). | |||||||||||||||||||||
| CuniportVoipDialPlanName | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.7 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current set ONT Voip network dial plan name(1 ~ 15 characters) | |||||||||||||||||||||
| CuniportVoipAor | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.8 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current set ONT Voip user part AOR(1 ~ 63 characters). | |||||||||||||||||||||
| CuniportVoipDispName | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.9 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current set ONT Voip sip display name(1 ~ 25 characters). | |||||||||||||||||||||
| CuniportVoipVmailUri | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.10 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current set ONT Voip voicemail server SIP URI(1 ~ 63 characters) | |||||||||||||||||||||
| CuniportVoipVmailExtimer | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.11 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip voice subscription expiration time(0 ~ 3600) | |||||||||||||||||||||
| CuniportVoipReleaseTimer | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.12 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip release timer( 0 ~ 30) | |||||||||||||||||||||
| CuniportVoipRohTimer | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.13 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip ROH timer( 0 ~ 30) | |||||||||||||||||||||
| CuniportVoipRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.14 | RowStatus | RC | ||||||||||||||||||
| TuniportOntCardTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.8 | NA | |||||||||||||||||||
| RuniportOntCardEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.8.1 | NA | |||||||||||||||||||
| CuniportOntCardTypeActive | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.8.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Activate/Inactivate ONT ENET/VEIP/POTS/VIDEO
| |||||||||||||||||||||
| CuniportOntEnetVeipPmEnable | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.8.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable/Disable PM counter of ONT ENET/VEIP
| |||||||||||||||||||||
| CuniportOntEnetPortSpeed | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.8.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable/Disable port speed of ONT ENET
| |||||||||||||||||||||
| CuniportOntCardRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.8.1.4 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status of uniportOntCardTable | |||||||||||||||||||||
| NontQos | 1.3.6.1.4.1.890.1.5.13.13.31.2.6 | ||||||||||||||||||||
| TingressProfileTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1 | NA | |||||||||||||||||||
| RingressProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1 | NA | |||||||||||||||||||
| CingressProfileName | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.1 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current ONT QoS Ingress Profile Name. | |||||||||||||||||||||
| CingressProfileDot1p0tc | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set traffic class mapping to 802.1P priority 0.
| |||||||||||||||||||||
| CingressProfileDot1p1tc | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set traffic class mapping to 802.1P priority 1.
| |||||||||||||||||||||
| CingressProfileDot1p2tc | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set traffic class mapping to 802.1P priority 2.
| |||||||||||||||||||||
| CingressProfileDot1p3tc | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set traffic class mapping to 802.1P priority 3.
| |||||||||||||||||||||
| CingressProfileDot1p4tc | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set traffic class mapping to 802.1P priority 4.
| |||||||||||||||||||||
| CingressProfileDot1p5tc | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set traffic class mapping to 802.1P priority 5.
| |||||||||||||||||||||
| CingressProfileDot1p6tc | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set traffic class mapping to 802.1P priority 6.
| |||||||||||||||||||||
| CingressProfileDot1p7tc | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set traffic class mapping to 802.1P priority 7.
| |||||||||||||||||||||
| CingressProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.10 | RowStatus | RC | ||||||||||||||||||
| TpbitProfileTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2 | NA | |||||||||||||||||||
| RpbitProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1 | NA | |||||||||||||||||||
| CpbitProfileName | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.1 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current ONT QoS pbit Profile Name. | |||||||||||||||||||||
| CpbitProfileP0to | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set traffic class mapping to 802.1P priority 0.
| |||||||||||||||||||||
| CpbitProfileP1to | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set traffic class mapping to 802.1P priority 1.
| |||||||||||||||||||||
| CpbitProfileP2to | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set traffic class mapping to 802.1P priority 2.
| |||||||||||||||||||||
| CpbitProfileP3to | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set traffic class mapping to 802.1P priority 3.
| |||||||||||||||||||||
| CpbitProfileP4to | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set traffic class mapping to 802.1P priority 4.
| |||||||||||||||||||||
| CpbitProfileP5to | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set traffic class mapping to 802.1P priority 5.
| |||||||||||||||||||||
| CpbitProfileP6to | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set traffic class mapping to 802.1P priority 6.
| |||||||||||||||||||||
| CpbitProfileP7to | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set traffic class mapping to 802.1P priority 7.
| |||||||||||||||||||||
| CpbitProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.10 | RowStatus | RC | ||||||||||||||||||
| TbwProfileTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.3 | NA | |||||||||||||||||||
| RbwProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.3.1 | NA | |||||||||||||||||||
| CbwProfileName | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.3.1.1 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current ONT QoS Bandwidth Profile Name. | |||||||||||||||||||||
| CbwProfileSir | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.3.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set SIR value. | |||||||||||||||||||||
| CbwProfileAir | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.3.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set AIR value. | |||||||||||||||||||||
| CbwProfilePir | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.3.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set PIR value. | |||||||||||||||||||||
| CbwProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.3.1.5 | RowStatus | RC | ||||||||||||||||||
| CbwProfileUstype | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.3.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Modify the upstream type.
US TCONT Type
+-----------------+---------+---------+---------+-------+--------------+
| Type0 | Type1 | Type2 | Type3 | Type4 | Type5 |
| | | | | | |
+-----------------+---------+---------+---------+-------+--------------+
| | sir | | | | sir |
+ auto-correction +---------+---------+---------+-------+--------------+
| when ustype | | air | air | | air |
+ is setting to 0 +---------+---------+---------+-------+--------------+
| | pir=sir | pir=air | pir>air | pir | pir>=sir+air |
+-----------------+-------------------+---------+-------+--------------+
PS: If After auto-correction, the type still is 0,
then the profile can`t be used as a US profile. | |||||||||||||||||||||
| TcacProfileTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.4 | NA | |||||||||||||||||||
| RcacProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.4.1 | NA | |||||||||||||||||||
| CcacProfileName | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.4.1.1 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current ONT QoS CAC profile name | |||||||||||||||||||||
| CcacProfileMcastBw | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.4.1.2 | INTEGER (100..1200000) | RW | ||||||||||||||||||
column · INTEGER (100..1200000) · read-write · current set multicast bandwidth in kbps | |||||||||||||||||||||
| CcacProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.4.1.3 | RowStatus | RC | ||||||||||||||||||
| SgponQosWred | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.5 | EnabledStatus | RW | ||||||||||||||||||
scalar · EnabledStatus · read-write · current enable/disable gpon qos wred. | |||||||||||||||||||||
| SgponQosDsMeter | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current gpon qos ds-meter.
| |||||||||||||||||||||
| TontAlarmProfileTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.7 | NA | |||||||||||||||||||
| RontAlarmProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in ONT Alarm profile table for DDMI threshold setting.
| |||||||||||||||||||||
| ContAlarmProfileName | 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.1 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current ONT Alarm Profile Name. | |||||||||||||||||||||
| ContAlarmProfileFeedVoltThreshLow | 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.2 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current set Lower Power Feed Voltage Threshold (unit V). The range of voltage is between 2.80 and 3.59 V. | |||||||||||||||||||||
| ContAlarmProfileFeedVoltThreshUp | 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current set Upper Power Feed Voltage Threshold (unit V). The range of voltage is between 2.80 and 3.59 V. | |||||||||||||||||||||
| ContAlarmProfileBiasCurrThreshLow | 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.4 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current set Lower Laser Bias Current Threshold (unit mA). The range of current is between 0 and 79 mA. | |||||||||||||||||||||
| ContAlarmProfileBiasCurrThreshUp | 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.5 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current set Upper Laser Bias Current Threshold (unit mA). The range of current is between 0 and 79 mA. | |||||||||||||||||||||
| ContAlarmProfileTemperatureThreshLow | 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.6 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current set Lower Temperature Threshold (unit degree C). The range of temperature is between -40 and 100 degree C. | |||||||||||||||||||||
| ContAlarmProfileTemperatureThreshUp | 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.7 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current set Upper Temperature Threshold (unit degree C). The range of temperature is between -40 and 100 degree C. | |||||||||||||||||||||
| ContAlarmProfileTxPowerThreshLow | 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.8 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current set Lower Transmit Power Threshold (unit dBm). The range of power is between -15.3 and 6.5 dBm. | |||||||||||||||||||||
| ContAlarmProfileTxPowerThreshUp | 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.9 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current set Upper Transmit Power Threshold (unit dBm). The range of power is between -15.3 and 6.5 dBm. | |||||||||||||||||||||
| ContAlarmProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.10 | RowStatus | RC | ||||||||||||||||||
| ContAlarmProfileRxPowerThreshLow | 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.11 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current set Lower Receive Power Threshold (unit dBm). The range of power is between -127 and 0 dBm. | |||||||||||||||||||||
| ContAlarmProfileRxPowerThreshUp | 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.12 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current set Upper Receive Power Threshold (unit dBm). The range of power is between -127 and 0 dBm. | |||||||||||||||||||||
| TontvenetTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.8 | NA | |||||||||||||||||||
| RontvenetEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.8.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in ontvenetTable
| |||||||||||||||||||||
| ContvenetCardPort | 1.3.6.1.4.1.890.1.5.13.13.31.2.8.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current ontvenetCardPort. | |||||||||||||||||||||
| CpmvenetEnable | 1.3.6.1.4.1.890.1.5.13.13.31.2.8.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current pmvenetEnable.
| |||||||||||||||||||||
| ContvenetRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.8.1.3 | RowStatus | RC | ||||||||||||||||||
| ContvenetAction | 1.3.6.1.4.1.890.1.5.13.13.31.2.8.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Delete all configurations relating to ontvenet.
| |||||||||||||||||||||
| TontpotsTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.9 | NA | |||||||||||||||||||
| RontpotsEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.9.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in ontpotsTable
| |||||||||||||||||||||
| ContpotsCardPort | 1.3.6.1.4.1.890.1.5.13.13.31.2.9.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current ontpotsCardPort. | |||||||||||||||||||||
| ContpotsRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.9.1.2 | RowStatus | RC | ||||||||||||||||||
| ContpotsAction | 1.3.6.1.4.1.890.1.5.13.13.31.2.9.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Delete all configurations relating to ontpots.
| |||||||||||||||||||||
| NontVoipProfile | 1.3.6.1.4.1.890.1.5.13.13.31.2.10 | ||||||||||||||||||||
| TsipProfileTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1 | NA | |||||||||||||||||||
| RsipProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1 | NA | |||||||||||||||||||
| CsipProfileName | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.1 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current ONT Voip sip profile name(1 ~ 15 characters). | |||||||||||||||||||||
| CsipProfileProxyServiceAddr | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.2 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current set ONT Voip proxy service address(1 ~ 63 characters). | |||||||||||||||||||||
| CsipProfileOutProxyAddr | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current set ONT Voip out proxy address(1 ~ 15 characters). | |||||||||||||||||||||
| CsipProfilePriDns | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.4 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current set ONT Voip primary sip dns(ip format). | |||||||||||||||||||||
| CsipProfileSecDns | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.5 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current set ONT Voip secondary sip dns(ip format). | |||||||||||||||||||||
| CsipProfileRegExpTime | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip sip registration expiration time(0 ~ 25200 sec). | |||||||||||||||||||||
| CsipProfileReregHeadStartTime | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip sip re-registration head start time(0 ~ 720 sec). | |||||||||||||||||||||
| CsipProfileHostPartUri | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.8 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current set ONT Voip host or domain part of the sip address(1 ~ 63 characters). | |||||||||||||||||||||
| CsipProfileRegistrar | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.9 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current set ONT Voip sip registrar address(1 ~ 63 characters). | |||||||||||||||||||||
| CsipProfileSoftSwitch | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.10 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current set ONT Voip sip gateway softswitch vendor. This format os four ASCII coded alphabetic characters[A..Z] as defined in ANSI T1.220(4 characters). | |||||||||||||||||||||
| CsipProfileCid | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.11 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current set ONT sip caller ID features.
| |||||||||||||||||||||
| CsipProfileCallWait | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.12 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current set ONT sip call waiting feature.
| |||||||||||||||||||||
| CsipProfileCallProgTrans | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.13 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current set ONT sip progress or transfer feature.
| |||||||||||||||||||||
| CsipProfileCallPresent | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.14 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current set ONT sip call presentation feature.
| |||||||||||||||||||||
| CsipProfileDirectCon | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.15 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current set ONT sip direct connect feature.
| |||||||||||||||||||||
| CsipProfileDirectConUri | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.16 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current set ONT direct connect URI(1 ~ 63 characters). | |||||||||||||||||||||
| CsipProfileBridgeLineAgentUri | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.17 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current set ONT bridge line agent URI(1 ~ 63 characters). | |||||||||||||||||||||
| CsipProfileConfFactoryUri | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.18 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current set ONT conference factory URI(1 ~ 63 characters). | |||||||||||||||||||||
| CsipProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.19 | RowStatus | RC | ||||||||||||||||||
| TcommonProfileTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2 | NA | |||||||||||||||||||
| RcommonProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1 | NA | |||||||||||||||||||
| CcommonProfileName | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.1 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current ONT Voip common profile name(1 ~ 15 characters). | |||||||||||||||||||||
| CcommonProfileLocalPortMin | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip base RTP port(1 ~ 65535, but must smaller than highest RTP port). | |||||||||||||||||||||
| CcommonProfileLocalPortMax | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip highest RTP port(1 ~ 65535, but must bigger than highest RTP port). | |||||||||||||||||||||
| CcommonProfileDscpMark | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip diffserv code point to be used for utgoing RTP packets for this profile(0 ~ 63). | |||||||||||||||||||||
| CcommonProfilePiggyback | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip RTP piggyback events.
| |||||||||||||||||||||
| CcommonProfileTone | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip handlin of tones via RTP tone events per RFC 4733.
| |||||||||||||||||||||
| CcommonProfileDtmf | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip handling of DTMF via RTP DTMF events per RFC 4733.
| |||||||||||||||||||||
| CcommonProfileCas | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip handling of CAS via RTP CAS events per RFC 4733.
| |||||||||||||||||||||
| CcommonProfileAnnounceType | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip treatment when a subscriber goes off hook but dose not attempt a call.
| |||||||||||||||||||||
| CcommonProfileJitterTarget | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.10 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip target value of the jitter buffer in milliseconds(0 ~ 500 milliseconds). | |||||||||||||||||||||
| CcommonProfileJitterBufMax | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.11 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip maximum depth of the jitter buffer associated with this service in milliseconds(0 ~ 5000 milliseconds). | |||||||||||||||||||||
| CcommonProfileEchoCancel | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.12 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip echo cancellation.
| |||||||||||||||||||||
| CcommonProfilePstnProtocol | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.13 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip pstn protocol the value is equal to the E.164 country code. ex: taiwan is 886. | |||||||||||||||||||||
| CcommonProfileFaxMode | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.14 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip fax mode.
| |||||||||||||||||||||
| CcommonProfile1stCodec | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.15 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip codec selection as defined by RFC 3551.
| |||||||||||||||||||||
| CcommonProfile2ndCodec | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.16 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip codec selection as defined by RFC 3551.
| |||||||||||||||||||||
| CcommonProfile3rdCodec | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.17 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip codec selection as defined by RFC 3551.
| |||||||||||||||||||||
| CcommonProfile4thCodec | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.18 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip codec selection as defined by RFC 3551.
| |||||||||||||||||||||
| CcommonProfile1stPacketPeriod | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.19 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip packet period selection interval in milliseconds(10 ~ 30 milliseconds). | |||||||||||||||||||||
| CcommonProfile2ndPacketPeriod | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.20 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip packet period selection interval in milliseconds(10 ~ 30 milliseconds). | |||||||||||||||||||||
| CcommonProfile3rdPacketPeriod | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.21 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip packet period selection interval in milliseconds(10 ~ 30 milliseconds). | |||||||||||||||||||||
| CcommonProfile4thPacketPeriod | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.22 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip packet period selection interval in milliseconds(10 ~ 30 milliseconds). | |||||||||||||||||||||
| CcommonProfile1stSilence | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.23 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip silence suppression.
| |||||||||||||||||||||
| CcommonProfile2ndSilence | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.24 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip silence suppression.
| |||||||||||||||||||||
| CcommonProfile3rdSilence | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.25 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip silence suppression.
| |||||||||||||||||||||
| CcommonProfile4thSilence | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.26 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip silence suppression.
| |||||||||||||||||||||
| CcommonProfileOobDtmf | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.27 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip out of band DTMF carriage.
| |||||||||||||||||||||
| CcommonProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.28 | RowStatus | RC | ||||||||||||||||||
| CcommonProfileSignalCode | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.29 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip signal conde.
| |||||||||||||||||||||
| NdialPlan | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3 | ||||||||||||||||||||
| TdialPlanCommTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.1 | NA | |||||||||||||||||||
| RdialPlanCommEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in ONT Voip network dial plan common table.
| |||||||||||||||||||||
| CdialPlanCommName | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.1.1.1 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current ONT Voip network dial plan Name(1 ~ 15 characters). | |||||||||||||||||||||
| CdialPlanCommMaxSize | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip maximum number of dial plans(1 ~ 256). | |||||||||||||||||||||
| CdialPlanCommCriticalTimeout | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.1.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip critical dial timeout for digit map processing in milliseconds(0 ~ 8000 milliseconds). | |||||||||||||||||||||
| CdialPlanCommPartialTimeout | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.1.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip partial dial timeout for digit map processing in milliseconds(0 ~ 32000 milliseconds). | |||||||||||||||||||||
| CdialPlanCommFormat | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.1.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current set ONT Voip dial plan format standard that is supported in the ONT for Voip.
| |||||||||||||||||||||
| CdialPlanCommRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.1.1.6 | RowStatus | RC | ||||||||||||||||||
| TdialPlanContTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.2 | NA | |||||||||||||||||||
| RdialPlanContEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in ONT Voip network dial plan content table. | |||||||||||||||||||||
| CdialPlanContName | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.2.1.1 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current ONT Voip network dial plan Name. When get or set this object, The value of the object will be parsed to ASCII on SNMPc application. | |||||||||||||||||||||
| CdialPlanContId | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.2.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current set ONT Voip dial plans id(1 ~ 16). | |||||||||||||||||||||
| CdialPlanContToken | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.2.1.3 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current set ONT Voip dial plan token(1 ~ 28 characters). When get or set this object, The value of the object will be parsed to ASCII on SNMPc application. | |||||||||||||||||||||
| CdialPlanContRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.2.1.4 | RowStatus | RC | ||||||||||||||||||
| TontvideoTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.11 | NA | |||||||||||||||||||
| RontvideoEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.11.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in ontvideoTable
| |||||||||||||||||||||
| ContvideoPort | 1.3.6.1.4.1.890.1.5.13.13.31.2.11.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current ontvideoPort. | |||||||||||||||||||||
| ContvideoRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.11.1.2 | RowStatus | RC | ||||||||||||||||||
| ContvideoAction | 1.3.6.1.4.1.890.1.5.13.13.31.2.11.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Delete all configurations relating to ontvideo.
| |||||||||||||||||||||
| TonuModelTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.12 | NA | |||||||||||||||||||
| RonuModelEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1 | NA | |||||||||||||||||||
| ConuModelName | 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.1 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current ONU model name. | |||||||||||||||||||||
| ConuModelID | 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.2 | INTEGER (0..8) | RW | ||||||||||||||||||
column · INTEGER (0..8) · read-write · current ONU model ID. | |||||||||||||||||||||
| ConuModelVendorVersion | 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.3 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current ONU model vendor version name. | |||||||||||||||||||||
| ConuModelSoftwareVersion | 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.4 | OCTET STRING | RW | ||||||||||||||||||
column · OCTET STRING · read-write · current ONU model software version. | |||||||||||||||||||||
| ConuModelCard1 | 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.5 | INTEGER (0..255) | RW | ||||||||||||||||||
column · INTEGER (0..255) · read-write · current ONU model GIGA Card entity ID. 0 means no this card. | |||||||||||||||||||||
| ConuModelCard2 | 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.6 | INTEGER (0..255) | RW | ||||||||||||||||||
column · INTEGER (0..255) · read-write · current ONU model VEIP Card entity ID. 0 means no this card. | |||||||||||||||||||||
| ConuModelCard3 | 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.7 | INTEGER (0..255) | RW | ||||||||||||||||||
column · INTEGER (0..255) · read-write · current ONU model POTS Card entity ID. 0 means no this card. | |||||||||||||||||||||
| ConuModelCard4 | 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.8 | INTEGER (0..255) | RW | ||||||||||||||||||
column · INTEGER (0..255) · read-write · current ONU model VIDEO Card entity ID. 0 means no this card. | |||||||||||||||||||||
| ConuModelCard5 | 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.9 | INTEGER (0..255) | RW | ||||||||||||||||||
column · INTEGER (0..255) · read-write · current ONU model 100M Card entity ID. 0 means no this card. | |||||||||||||||||||||
| ConuModelRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.10 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The status of specified ONU model entry. | |||||||||||||||||||||
| NremoteInfo | 1.3.6.1.4.1.890.1.5.13.13.31.3 | ||||||||||||||||||||
| TponStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.1 | NA | |||||||||||||||||||
| RponStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1 | NA | |||||||||||||||||||
| Cstate | 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current state.
| |||||||||||||||||||||
| ColtKeyExchange | 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current pon keyExchange.
| |||||||||||||||||||||
| CsnAcq | 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current SNAcq.
| |||||||||||||||||||||
| CrogueDectect | 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current rogueDectect.
| |||||||||||||||||||||
| CrogueDestructState | 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current rogueDestructState.
| |||||||||||||||||||||
| CprocInterval | 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current procInterval. | |||||||||||||||||||||
| CprocIntervalSec | 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current procIntervalSec. | |||||||||||||||||||||
| Clos | 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current LOS.
| |||||||||||||||||||||
| Clast | 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Last. | |||||||||||||||||||||
| CendOfBurstOffset | 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current EndofBurstOffset. | |||||||||||||||||||||
| NontStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.2 | ||||||||||||||||||||
| TontCurrentStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1 | NA | |||||||||||||||||||
| RontCurrentStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1 | NA | |||||||||||||||||||
| CserialNumber | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.1 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Serial Number. | |||||||||||||||||||||
| CpasswordOnt | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Ont password. | |||||||||||||||||||||
| ContStatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.3 | RemoteOnuStatus | RO | ||||||||||||||||||
column · RemoteOnuStatus · read-only · current ONT status. | |||||||||||||||||||||
| CversionA | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current versionA | |||||||||||||||||||||
| CversionB | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current versionB | |||||||||||||||||||||
| CactVersion | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current actVersion.
| |||||||||||||||||||||
| CestimatedDistance | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.7 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The estimated distance to the ONT.
| |||||||||||||||||||||
| CpppoeStatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This item reports the PPPoE session status of the ONT.
| |||||||||||||||||||||
| CmodelVersion | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.9 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current This item indicates the model version reported by ONU. | |||||||||||||||||||||
| CwanIp | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.10 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current WAN IP address of this ONU. | |||||||||||||||||||||
| CupgradeStatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The upgrade status of this ONU. 0. The upgrade status is idle. 1. The planned version of the ont and the action version of the ONT match. 2. The ONT start to download the FW. 3. The ONT upgraded the FW successes and reboot. 4. The ONT upgraded the FW failed. 5. The ONT upgraded the FW failed becaus ONT down. 6. Not found the matching image with the planned version. 7. The ONT is not set the planned version. 8. The ONT upgraded the FW failed because timeout. 9. The ONT status is not ready. 10. The FW upgrade waiting queue is full. 11. The ONT is downloading. 12. The ONT is already in waiting queue. 13. The ONT action version and the planned version mismatch. 14. Change to Image(1) and reboot. 15. Change to Image(2) and reboot. 16. No ONT image on the OLT.
| |||||||||||||||||||||
| TontBwGroupStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.3 | NA | |||||||||||||||||||
| RontBwGroupStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in ontBwGroupStatusTable
| |||||||||||||||||||||
| ContBwGroupStatusAllocId | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.3.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This MIB reports the allocation ID assigned to this bandwidth group. | |||||||||||||||||||||
| TontCountersTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4 | NA | |||||||||||||||||||
table · not-accessible · current ontCountersTable | |||||||||||||||||||||
| RontCountersEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1 | NA | |||||||||||||||||||
| ContCountersUnreceivedBursts | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.1 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Unreceived bursts. | |||||||||||||||||||||
| ContCountersPositiveDriftBits | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.2 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Positive drift (bits). | |||||||||||||||||||||
| ContCountersNegativeDriftBits | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.3 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Negative drift (bits). | |||||||||||||||||||||
| ContCountersBip8Errors | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.4 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Bip8 errors. | |||||||||||||||||||||
| ContCountersCorrectedBytes | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.5 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Corrected Bytes. | |||||||||||||||||||||
| ContCountersCorrectedCodewords | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.6 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Corrected Codewords. | |||||||||||||||||||||
| ContCountersUncorrctableCodewords | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.7 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Uncorrctable Codewords. | |||||||||||||||||||||
| ContCountersTotalReceivedCodewords | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.8 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Total received Codewords. | |||||||||||||||||||||
| ContCountersDsBer | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.9 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current DS BER (REI). | |||||||||||||||||||||
| ContCountersBipByte | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.10 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Bip byte. | |||||||||||||||||||||
| ContCountersRxPloamCrcErrors | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.11 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Rx Ploam CrcErrors. | |||||||||||||||||||||
| ContCountersRxPloamNonidle | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.12 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Rx Ploam non idle. | |||||||||||||||||||||
| ContCountersRxOmciPacketCrcErrors | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.13 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Rx Omci Packet Crc Errors. | |||||||||||||||||||||
| ContCountersLcdgErrors | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.14 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Lcdg errors. | |||||||||||||||||||||
| ContCountersRdiErrors | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.15 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Rdi errors. | |||||||||||||||||||||
| ContCountersRxOmciPacket | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.16 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Rx Omci Packet. | |||||||||||||||||||||
| TontWanStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5 | NA | |||||||||||||||||||
| RontWanStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1 | NA | |||||||||||||||||||
| ContWanId | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.1 | INTEGER (1..4) | NA | ||||||||||||||||||
column · INTEGER (1..4) · not-accessible · current ont wan Id | |||||||||||||||||||||
| ContWanStatusEnable | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This MIB reports the wan status type.
| |||||||||||||||||||||
| ContWanStatusType | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This MIB reports the wan status type.
| |||||||||||||||||||||
| ContWanStatusLinkStatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This MIB reports the wan status.
| |||||||||||||||||||||
| ContWanStatusServiceType | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.5 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current This MIB reports the wan status.
| |||||||||||||||||||||
| ContWanStatusVlan | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This MIB reports the wan vlan. | |||||||||||||||||||||
| ContWanStatusPriority | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This MIB reports the wan proirity. | |||||||||||||||||||||
| ContWanStatusIpMode | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This MIB reports the wan ip mode.
| |||||||||||||||||||||
| ContWanStatusIp | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.9 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current This MIB reports the wan IP. | |||||||||||||||||||||
| ContWanStatusMask | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.10 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current This MIB reports the wan IP mask. | |||||||||||||||||||||
| ContWanStatusGateway | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.11 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current This MIB reports the wan IP gateway. | |||||||||||||||||||||
| ContWanStatusPrimaryDns | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.12 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current This MIB reports the wan primary dns. | |||||||||||||||||||||
| ContWanStatusSecondDns | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.13 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current This MIB reports the wan second dns. | |||||||||||||||||||||
| ContWanStatusNat | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.14 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This MIB reports the wan nat status.
| |||||||||||||||||||||
| TontCardStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.3 | NA | |||||||||||||||||||
| RontCardStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.3.1 | NA | |||||||||||||||||||
| Cstatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.3.1.1 | RemoteOnuStatus | RO | ||||||||||||||||||
column · RemoteOnuStatus · read-only · current ONT card status. | |||||||||||||||||||||
| CadminState | 1.3.6.1.4.1.890.1.5.13.13.31.3.3.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current adminState.
| |||||||||||||||||||||
| CexpectType | 1.3.6.1.4.1.890.1.5.13.13.31.3.3.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current expectType.
| |||||||||||||||||||||
| CactualType | 1.3.6.1.4.1.890.1.5.13.13.31.3.3.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current actualType.
| |||||||||||||||||||||
| CexpectedPort | 1.3.6.1.4.1.890.1.5.13.13.31.3.3.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current expectedPort. | |||||||||||||||||||||
| CactualPort | 1.3.6.1.4.1.890.1.5.13.13.31.3.3.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current actualPort. | |||||||||||||||||||||
| TontDdmiStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.4 | NA | |||||||||||||||||||
| RontDdmiStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.4.1 | NA | |||||||||||||||||||
| Cvoltage | 1.3.6.1.4.1.890.1.5.13.13.31.3.4.1.1 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current ONT Voltage (V). | |||||||||||||||||||||
| CrxPower | 1.3.6.1.4.1.890.1.5.13.13.31.3.4.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current ONT Rx power (dbm). | |||||||||||||||||||||
| CtxPower | 1.3.6.1.4.1.890.1.5.13.13.31.3.4.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current ONT Tx power (db). | |||||||||||||||||||||
| ClaserCurrent | 1.3.6.1.4.1.890.1.5.13.13.31.3.4.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current ONT Laser Bias current (uA). | |||||||||||||||||||||
| ContTemperature | 1.3.6.1.4.1.890.1.5.13.13.31.3.4.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current ONT Temperature (C). | |||||||||||||||||||||
| ContDdmiRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.4.1.6 | EnabledStatus | RW | ||||||||||||||||||
| ContDdmiStatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.4.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current ontDdmiStatus.
| |||||||||||||||||||||
| NontEnetPmCounters | 1.3.6.1.4.1.890.1.5.13.13.31.3.5 | ||||||||||||||||||||
| TontEnetCurrentPmCountersTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1 | NA | |||||||||||||||||||
| RontEnetCurrentPmCountersEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in ontEnetPmCounters
| |||||||||||||||||||||
| ContEnetCurrentPmUsOctets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.1 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT enet PM counters up stream octets. | |||||||||||||||||||||
| ContEnetCurrentPmUsPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.2 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT enet PM counters up stream packets. | |||||||||||||||||||||
| ContEnetCurrentPmUsMcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.3 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT enet PM counters up stream mcast packets. | |||||||||||||||||||||
| ContEnetCurrentPmUsBcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.4 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT enet PM counters up stream bcast packets. | |||||||||||||||||||||
| ContEnetCurrentPmDsOctets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.5 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT enet PM counters ds stream octets. | |||||||||||||||||||||
| ContEnetCurrentPmDsPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.6 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT enet PM counters ds stream packets. | |||||||||||||||||||||
| ContEnetCurrentPmDsMcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.7 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT enet PM counters ds stream mcast packets. | |||||||||||||||||||||
| ContEnetCurrentPmDsBcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.8 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT enet PM counters ds stream bcast packets. | |||||||||||||||||||||
| ContEnetPmCountersGetCurrent | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.9 | EnabledStatus | RW | ||||||||||||||||||
| ContEnetPmCountersCheckGetCurrent | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current
| |||||||||||||||||||||
| TontEnetLast15PmCountersTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2 | NA | |||||||||||||||||||
| RontEnetLast15PmCountersEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in ontEnetPmCounters
| |||||||||||||||||||||
| ContEnetLast15PmUsOctets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.1 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT enet PM counters up stream octets. | |||||||||||||||||||||
| ContEnetLast15PmUsPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.2 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT enet PM counters up stream packets. | |||||||||||||||||||||
| ContEnetLast15PmUsMcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.3 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT enet PM counters up stream mcast packets. | |||||||||||||||||||||
| ContEnetLast15PmUsBcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.4 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT enet PM counters up stream bcast packets. | |||||||||||||||||||||
| ContEnetLast15PmDsOctets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.5 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT enet PM counters ds stream octets. | |||||||||||||||||||||
| ContEnetLast15PmDsPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.6 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT enet PM counters ds stream packets. | |||||||||||||||||||||
| ContEnetLast15PmDsMcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.7 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT enet PM counters ds stream mcast packets. | |||||||||||||||||||||
| ContEnetLast15PmDsBcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.8 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT enet PM counters ds stream bcast packets. | |||||||||||||||||||||
| ContEnetLast15PmInterval | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.9 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current ONT enet PM counters Interval. | |||||||||||||||||||||
| NontEnetStatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.6 | ||||||||||||||||||||
| TontEnetStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.6.1 | NA | |||||||||||||||||||
| RontEnetStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.6.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in ontEnetStatus
| |||||||||||||||||||||
| ContEnetPortStatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.6.1.1.1 | RemoteOnuStatus | RO | ||||||||||||||||||
column · RemoteOnuStatus · read-only · current ONT enet ME provision status. | |||||||||||||||||||||
| NontVenetPmCounters | 1.3.6.1.4.1.890.1.5.13.13.31.3.7 | ||||||||||||||||||||
| TontVenetCurrentPmCountersTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1 | NA | |||||||||||||||||||
| RontVenetCurrentPmCountersEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in ontVenetPmCounters
| |||||||||||||||||||||
| ContVenetCurrentPmUsOctets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.1 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT venet PM counters Upstream Octets Cont. | |||||||||||||||||||||
| ContVenetCurrentPmUsPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.2 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT venet PM counters Upstream Packets Count. | |||||||||||||||||||||
| ContVenetCurrentPmUsMcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.3 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT venet PM counters Upstream Multicast Packets Count. | |||||||||||||||||||||
| ContVenetCurrentPmUsBcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.4 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT venet PM counters Upstream Broadcast Packets Count. | |||||||||||||||||||||
| ContVenetCurrentPmDsOctets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.5 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT venet PM counters Downstream Octets Cont. | |||||||||||||||||||||
| ContVenetCurrentPmDsPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.6 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT venet PM counters Downstream Packets Count. | |||||||||||||||||||||
| ContVenetCurrentPmDsMcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.7 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT venet PM counters Downstream Multicast Packets Count. | |||||||||||||||||||||
| ContVenetCurrentPmDsBcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.8 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT venet PM counters Downstream Broadcast Packets Count. | |||||||||||||||||||||
| ContVenetPmCountersGetCurrent | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.9 | EnabledStatus | RW | ||||||||||||||||||
| ContVenetPmCountersCheckGetCurrent | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current
| |||||||||||||||||||||
| TontVenetLast15PmCountersTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2 | NA | |||||||||||||||||||
| RontVenetLast15PmCountersEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in ontVenetPmCounters
| |||||||||||||||||||||
| ContVenetLast15PmUsOctets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.1 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT venet PM counters Upstream Octets Count. | |||||||||||||||||||||
| ContVenetLast15PmUsPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.2 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT venet PM counters Upstream Packets Count. | |||||||||||||||||||||
| ContVenetLast15PmUsMcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.3 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT venet PM counters Upstream Multicast Packets Count. | |||||||||||||||||||||
| ContVenetLast15PmUsBcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.4 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT venet PM counters Upstream Broadcast Packets Count. | |||||||||||||||||||||
| ContVenetLast15PmDsOctets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.5 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT venet PM counters Downstream Octets Count. | |||||||||||||||||||||
| ContVenetLast15PmDsPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.6 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT venet PM counters Downstream Packets Count. | |||||||||||||||||||||
| ContVenetLast15PmDsMcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.7 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT venet PM counters Downstream Multicast Packets Count. | |||||||||||||||||||||
| ContVenetLast15PmDsBcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.8 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current ONT venet PM counters Downstream Broadcast Packets Count. | |||||||||||||||||||||
| ContVenetLast15PmInterval | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.9 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current ONT venet PM counters Interval. | |||||||||||||||||||||
| NontVenetStatusInfo | 1.3.6.1.4.1.890.1.5.13.13.31.3.8 | ||||||||||||||||||||
| TontVenetStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.8.1 | NA | |||||||||||||||||||
| RontVenetStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.8.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in ontVenetStatusInfo
| |||||||||||||||||||||
| ContVenetStatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.8.1.1.1 | RemoteOnuStatus | RO | ||||||||||||||||||
column · RemoteOnuStatus · read-only · current ONT Venet ME provision status. | |||||||||||||||||||||
| NontPotsStatusInfo | 1.3.6.1.4.1.890.1.5.13.13.31.3.9 | ||||||||||||||||||||
| TontPotsStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.9.1 | NA | |||||||||||||||||||
| RontPotsStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.9.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in ontPotsStatusInfo
| |||||||||||||||||||||
| ContPotsStatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.9.1.1.1 | RemoteOnuStatus | RO | ||||||||||||||||||
column · RemoteOnuStatus · read-only · current ONT Pots ME provision status. | |||||||||||||||||||||
| NontUniportStatusInfo | 1.3.6.1.4.1.890.1.5.13.13.31.3.10 | ||||||||||||||||||||
| TuniportVlanStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.1 | NA | |||||||||||||||||||
| RuniportVlanStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in uniportVlanStatusInfo | |||||||||||||||||||||
| CuniportVlanStatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.1.1.1 | RemoteOnuStatus | RO | ||||||||||||||||||
column · RemoteOnuStatus · read-only · current uniport VLAN ME provision status. | |||||||||||||||||||||
| TuniportFdbTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.2 | NA | |||||||||||||||||||
| RuniportFdbEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.2.1 | NA | |||||||||||||||||||
row · not-accessible · current uniport fdb address table, following the content of OMCI MAC bridge port bridge table data ME.
| |||||||||||||||||||||
| CuniFdbIndex | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.2.1.1 | INTEGER | RO | mandatory | |||||||||||||||||
column · INTEGER · read-only · mandatory uniport fdb index. | |||||||||||||||||||||
| CuniFdbMac | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.2.1.2 | MacAddress | RO | ||||||||||||||||||
column · MacAddress · read-only · current uniport MAC address. | |||||||||||||||||||||
| CuniFdbAge | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.2.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current uniport MAC aging time in seconds. | |||||||||||||||||||||
| CuniFdbDynamic | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.2.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current uniport MAC address type, either dynamic or static.
| |||||||||||||||||||||
| CuniFdbFilter | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.2.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current uniport MAC filter type, either forward or filter.
| |||||||||||||||||||||
| TuniportIgmpStatisticsTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3 | NA | |||||||||||||||||||
table · not-accessible · current This table includes IGMP Channel statistics information | |||||||||||||||||||||
| RuniportIgmpStatisticsEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3.1 | NA | |||||||||||||||||||
| CuniportIgmpStatisticsUniVid | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current UniVid | |||||||||||||||||||||
| CuniportIgmpStatisticsRxReportV1 | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current RxReportV1 | |||||||||||||||||||||
| CuniportIgmpStatisticsRxReportV2 | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current RxReportV2 | |||||||||||||||||||||
| CuniportIgmpStatisticsRxReportV3 | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current RxReportV3 | |||||||||||||||||||||
| CuniportIgmpStatisticsRxLeave | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current RxLeave | |||||||||||||||||||||
| CuniportIgmpStatisticsDropRate | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current DropRate | |||||||||||||||||||||
| CuniportIgmpStatisticsDropOthers | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current DropOthers | |||||||||||||||||||||
| NontVideoStatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.11 | ||||||||||||||||||||
| TontVideoStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.11.1 | NA | |||||||||||||||||||
| RontVideoStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.11.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in ontVideoStatus
| |||||||||||||||||||||
| ContVideoPortStatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.11.1.1.1 | RemoteOnuStatus | RO | ||||||||||||||||||
column · RemoteOnuStatus · read-only · current ontVideo provision status. | |||||||||||||||||||||
| TontDdmiHistoryStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.12 | NA | |||||||||||||||||||
| RontDdmiHistoryStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.12.1 | NA | |||||||||||||||||||
| ContDdmiHistLast15Voltage | 1.3.6.1.4.1.890.1.5.13.13.31.3.12.1.1 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current ONT Voltage (V) in the last 15 minutes. | |||||||||||||||||||||
| ContDdmiHistLast15RxPower | 1.3.6.1.4.1.890.1.5.13.13.31.3.12.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current ONT Rx power (dbm) in the last 15 minutes. | |||||||||||||||||||||
| ContDdmiHistLast15TxPower | 1.3.6.1.4.1.890.1.5.13.13.31.3.12.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current ONT Tx power (db) in the last 15 minutes. | |||||||||||||||||||||
| ContDdmiHistLast15LaserCurrent | 1.3.6.1.4.1.890.1.5.13.13.31.3.12.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current ONT Laser Bias current (uA) in the last 15 minutes. | |||||||||||||||||||||
| ContDdmiHistLast15Temperature | 1.3.6.1.4.1.890.1.5.13.13.31.3.12.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current ONT Temperature (C) in the last 15 minutes. | |||||||||||||||||||||
| NuniPortOpModeSetup | 1.3.6.1.4.1.890.1.5.13.13.31.8 | ||||||||||||||||||||
| TuniPortOpModePortTable | 1.3.6.1.4.1.890.1.5.13.13.31.8.1 | NA | |||||||||||||||||||
| RuniPortOpModePortEntry | 1.3.6.1.4.1.890.1.5.13.13.31.8.1.1 | NA | |||||||||||||||||||
| CuniPortOpModePortVlanTranslation | 1.3.6.1.4.1.890.1.5.13.13.31.8.1.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current
| |||||||||||||||||||||
| CuniPortOpModePortVlanXlateMissDrop | 1.3.6.1.4.1.890.1.5.13.13.31.8.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current
| |||||||||||||||||||||
| CuniPortOpModePortEgrVlanXlateMissDrop | 1.3.6.1.4.1.890.1.5.13.13.31.8.1.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current
| |||||||||||||||||||||
| NtransceiverInfo | 1.3.6.1.4.1.890.1.5.13.13.31.14 | ||||||||||||||||||||
| TtransceiverSerialInfoTable | 1.3.6.1.4.1.890.1.5.13.13.31.14.1 | NA | |||||||||||||||||||
| RtransceiverSerialInfoEntry | 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in transceiverSerialInfoTable. | |||||||||||||||||||||
| CtransceiverSerialInfoEntryPort | 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Index of transceiverSerialInfo. It is referred to ifIndex | |||||||||||||||||||||
| CtransceiverSerialInfoEntryStatus | 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transceiver module status. 1:okWithDdm. 2:okWithoutDdm. 3:nonOperational
| |||||||||||||||||||||
| CtransceiverSerialInfoEntryVendor | 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Transceiver module vendor name. | |||||||||||||||||||||
| CtransceiverSerialInfoEntryPartNo | 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Part number provided by transceiver module vendor. | |||||||||||||||||||||
| CtransceiverSerialInfoEntrySerialNo | 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Serial number provided by transceiver module vendor. | |||||||||||||||||||||
| CtransceiverSerialInfoEntryRevision | 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Revision level for part number provided by transceiver module vendor. | |||||||||||||||||||||
| CtransceiverSerialInfoEntryDateCode | 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.7 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Transceiver module vendor's manufacturing date code | |||||||||||||||||||||
| CtransceiverSerialInfoEntryTransceiver | 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.8 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Transceiver module type names | |||||||||||||||||||||
| CtransceiverSerialInfoEntryCalibration | 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.9 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Transceiver module type calibration | |||||||||||||||||||||
| TtransceiverDdmInfoTable | 1.3.6.1.4.1.890.1.5.13.13.31.14.2 | NA | |||||||||||||||||||
| RtransceiverDdmInfoEntry | 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in transceiverDdmInfoTable. | |||||||||||||||||||||
| CtransceiverDdmInfoEntryPort | 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Index of transceiverDdmInfo. This will be referred to ifIndex | |||||||||||||||||||||
| CtransceiverDdmInfoEntryType | 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transceiver DDM information type. 1: Temperature 2: Voltage 3: TX Bias 4: TX power 5: RX power | |||||||||||||||||||||
| CtransceiverDdmInfoEntryAlarmMax | 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Transceiver high alarm threshold. The unit for temperature is C The unit for voltage is V The unit for TX bias is mA The unit for TX/RX power is dbm The value neg inf represents negative infinit(0mW) The value N/A represents not applicable. | |||||||||||||||||||||
| CtransceiverDdmInfoEntryAlarmMin | 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Transceiver low alarm threshold. The unit for temperature is C The unit for voltage is V The unit for TX bias is mA The unit for TX/RX power is dbm The value neg inf represents negative infinit(0mW) The value N/A represents not applicable. | |||||||||||||||||||||
| CtransceiverDdmInfoEntryWarnMax | 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Transceiver high warn threshold. The unit for temperature is C The unit for voltage is V The unit for TX bias is mA The unit for TX/RX power is dbm The value neg inf represents negative infinit(0mW) The value N/A represents not applicable. | |||||||||||||||||||||
| CtransceiverDdmInfoEntryWarnMin | 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Transceiver low warn threshold. The unit for temperature is C The unit for voltage is V The unit for TX bias is mA The unit for TX/RX power is dbm The value neg inf represents negative infinit(0mW) The value N/A represents not applicable. | |||||||||||||||||||||
| CtransceiverDdmInfoEntryCurrent | 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1.7 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Transceiver current DDM value. The unit for temperature is C The unit for voltage is V The unit for TX bias is mA The unit for TX/RX power is dbm The value neg inf represents negative infinit(0mW) The value N/A represents not applicable. | |||||||||||||||||||||
| CtransceiverDdmInfoEntryDescription | 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1.8 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Transceiver DDM information description. Show N/A if transceiver DDM information is not available. | |||||||||||||||||||||
| TtransceiverDdmInfoProfileTable | 1.3.6.1.4.1.890.1.5.13.13.31.14.3 | NA | |||||||||||||||||||
| RtransceiverDdmInfoProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in transceiverDdmInfoProfileTable. | |||||||||||||||||||||
| CtransceiverDdmInfoProfilePort | 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Index of transceiverDdmInfoProfile. This will be referred to ifIndex | |||||||||||||||||||||
| CtransceiverDdmInfoProfileType | 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Transceiver DDM information type. 1: Temperature 2: Voltage 3: TX Bias 4: TX power 5: RX power | |||||||||||||||||||||
| CtransceiverDdmInfoProfileAlarmMax | 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current Transceiver high alarm threshold. The unit for temperature is 0.01C, value range <12800 ~ -12800> The unit for voltage is 0.01V, value range <655 ~ 0> The unit for TX bias is 0.01mA, value range <13100 ~ 0> The unit for TX power is 0.01dbm, value range <820 ~ -4000> The unit for RX power is 0.01dbm, value range <820 ~ -4000> The value N/A represents transceiver DDM information does not setting. | |||||||||||||||||||||
| CtransceiverDdmInfoProfileAlarmMin | 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1.4 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current Transceiver low alarm threshold. The unit for temperature is 0.01C, value range <12800 ~ -12800> The unit for voltage is 0.01V, value range <655 ~ 0> The unit for TX bias is 0.01mA, value range <13100 ~ 0> The unit for TX power is 0.01dbm, value range <820 ~ -4000> The unit for RX power is 0.01dbm, value range <820 ~ -4000> The value N/A represents transceiver DDM information does not setting. | |||||||||||||||||||||
| CtransceiverDdmInfoProfileWarnMax | 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1.5 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current Transceiver high warn threshold. The unit for temperature is 0.01C, value range <12800 ~ -12800> The unit for voltage is 0.01V, value range <655 ~ 0> The unit for TX bias is 0.01mA, value range <13100 ~ 0> The unit for TX power is 0.01dbm, value range <820 ~ -4000> The unit for RX power is 0.01dbm, value range <820 ~ -4000> The value N/A represents transceiver DDM information does not setting. | |||||||||||||||||||||
| CtransceiverDdmInfoProfileWarnMin | 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1.6 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current Transceiver low warn threshold. The unit for temperature is 0.01C, value range <12800 ~ -12800> The unit for voltage is 0.01V, value range <655 ~ 0> The unit for TX bias is 0.01mA, value range <13100 ~ 0> The unit for TX power is 0.01dbm, value range <820 ~ -4000> The unit for RX power is 0.01dbm, value range <820 ~ -4000> The value N/A represents transceiver DDM information does not setting. | |||||||||||||||||||||
| CtransceiverDdmInfoProfileDescription | 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1.7 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Transceiver DDM information description. Show N/A if transceiver DDM information is not available. | |||||||||||||||||||||
| CtransceiverDdmInfoProfileRowstatus | 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1.8 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Profile enabled/disabled status. | |||||||||||||||||||||
| TtransceiverPerOntTable | 1.3.6.1.4.1.890.1.5.13.13.31.14.4 | NA | |||||||||||||||||||
table · not-accessible · current Per ONT measure value on OLT GPON transceiver | |||||||||||||||||||||
| RtransceiverPerOntEntry | 1.3.6.1.4.1.890.1.5.13.13.31.14.4.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in transceiverPerOntTable. | |||||||||||||||||||||
| CtransceiverPerOntNumber | 1.3.6.1.4.1.890.1.5.13.13.31.14.4.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current transceiverPerOntNumber is the number of configuration. | |||||||||||||||||||||
| CtransceiverPerOntRxPower | 1.3.6.1.4.1.890.1.5.13.13.31.14.4.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Transceiver high alarm threshold. The unit for RX power is dbm The value neg inf represents negative infinit(0mW) The value N/A represents not applicable. | |||||||||||||||||||||
| NmulticastStatus | 1.3.6.1.4.1.890.1.5.13.13.31.15 | ||||||||||||||||||||
| TigmpchannelStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.15.1 | NA | |||||||||||||||||||
| RigmpchannelStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1 | NA | |||||||||||||||||||
row · not-accessible · current IGMP channel status. | |||||||||||||||||||||
| CigmpchannelStatusVlanID | 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.1 | INTEGER | RO | ||||||||||||||||||
| CigmpchannelStatusIfIndex | 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.2 | INTEGER | RO | ||||||||||||||||||
| CigmpchannelStatusGroupAddressType | 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.3 | InetAddressType | RO | ||||||||||||||||||
column · InetAddressType · read-only · current The address type of the igmpchannelStatusGroupAddress entry.
| |||||||||||||||||||||
| CigmpchannelStatusGroupAddress | 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.4 | InetAddress (SIZE (4 | 16)) | RO | ||||||||||||||||||
| CigmpchannelStatusGem | 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.5 | INTEGER | RO | ||||||||||||||||||
| CigmpchannelStatusPortAid | 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.6 | DisplayString | RO | ||||||||||||||||||
| CigmpchannelStatusUniVid | 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.7 | INTEGER | RO | ||||||||||||||||||
| CigmpchannelStatusGroupFilterMode | 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current cache state, applicable to MGMDv3-compatible nodes. The value indicates whether the state is INCLUDE or EXCLUDE.
| |||||||||||||||||||||
| CigmpchannelStatusGroupUpTime | 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.9 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The value specifies the group up time of indicated multicast group. | |||||||||||||||||||||
| TigmpchannelClientSrcIpTable | 1.3.6.1.4.1.890.1.5.13.13.31.15.2 | NA | |||||||||||||||||||
| RigmpchannelClientSrcIpEntry | 1.3.6.1.4.1.890.1.5.13.13.31.15.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in igmpchannelClientSrcIpTable. | |||||||||||||||||||||
| CigmpchannelClientSrcIpIndex | 1.3.6.1.4.1.890.1.5.13.13.31.15.2.1.1 | INTEGER | RO | ||||||||||||||||||
| CigmpchannelClientSrcIpAddressType | 1.3.6.1.4.1.890.1.5.13.13.31.15.2.1.2 | InetAddressType | RO | ||||||||||||||||||
column · InetAddressType · read-only · current
| |||||||||||||||||||||
| CigmpchannelClientSrcIpAddress | 1.3.6.1.4.1.890.1.5.13.13.31.15.2.1.3 | InetAddress (SIZE (4 | 16)) | RO | ||||||||||||||||||
| NgponVlanTranslationSetup | 1.3.6.1.4.1.890.1.5.13.13.31.16 | ||||||||||||||||||||
| TgponVlanTranslationRuleTable | 1.3.6.1.4.1.890.1.5.13.13.31.16.1 | NA | |||||||||||||||||||
| RgponVlanTranslationRuleEntry | 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in vlan-translation rule table | |||||||||||||||||||||
| CgponVlanTranslationRuleName | 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.1 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The name of vlan-translation entry | |||||||||||||||||||||
| CgponVlanTranslationRulePort | 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current interface port id | |||||||||||||||||||||
| CgponVlanTranslationRuleOuterVid | 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current outer vid. The range of VID is between 1 and 4094. 0 presents ignore this field | |||||||||||||||||||||
| CgponVlanTranslationRuleOuterPriority | 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current outer priority
| |||||||||||||||||||||
| CgponVlanTranslationRuleInnerVid | 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current inner vid. The range of VID is between 1 and 4094. 0 presents ignore this field | |||||||||||||||||||||
| CgponVlanTranslationRuleInnerPriority | 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current inner priority
| |||||||||||||||||||||
| CgponVlanTranslationRuleTransSVid | 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current translated Svid. The range of VID is between 1 and 4094. 0 presents ignore this field | |||||||||||||||||||||
| CgponVlanTranslationRuleSPriority | 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current S priority
| |||||||||||||||||||||
| CgponVlanTranslationRuleTransCVid | 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current translated Cvid. The range of VID is between 1 and 4094. 0 presents ignore this field | |||||||||||||||||||||
| CgponVlanTranslationRuleCPriority | 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.10 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current C priority
| |||||||||||||||||||||
| CgponVlanTranslationRuleN1Map | 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.11 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current N:1 mapping group id. 0 presents 1:1 map | |||||||||||||||||||||
| CgponVlanTranslationRuleRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.12 | RowStatus | RC | ||||||||||||||||||
| Nport | 1.3.6.1.4.1.890.1.5.13.13.33 | ||||||||||||||||||||
| TsubrPortTable | 1.3.6.1.4.1.890.1.5.13.13.33.1 | NA | |||||||||||||||||||
table · not-accessible · current This table includes subscriber attributes for the port. | |||||||||||||||||||||
| RsubrPortEntry | 1.3.6.1.4.1.890.1.5.13.13.33.1.1 | NA | |||||||||||||||||||
| CsubrPortName | 1.3.6.1.4.1.890.1.5.13.13.33.1.1.1 | DisplayString (SIZE (0..31)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..31)) · read-write · current Name of the subscriber. | |||||||||||||||||||||
| CsubrPortTel | 1.3.6.1.4.1.890.1.5.13.13.33.1.1.2 | DisplayString (SIZE (0..31)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..31)) · read-write · current TelNo. of the subscriber. | |||||||||||||||||||||
| NadslPort | 1.3.6.1.4.1.890.1.5.13.13.33.2 | ||||||||||||||||||||
| TadslLineStatusTable | 1.3.6.1.4.1.890.1.5.13.13.33.2.1 | NA | |||||||||||||||||||
table · not-accessible · current This table includes the ADSL line status. | |||||||||||||||||||||
| RadslLineStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.33.2.1.1 | NA | |||||||||||||||||||
| CadslLineStatusMode | 1.3.6.1.4.1.890.1.5.13.13.33.2.1.1.1 | DisplayString (SIZE (0..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..31)) · read-only · current The link up mode of the ADSL line. | |||||||||||||||||||||
| CadslLineStatusUpTime | 1.3.6.1.4.1.890.1.5.13.13.33.2.1.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The time since the ADSL line link up. format:<day:hour:min:sec> | |||||||||||||||||||||
| Nstp | 1.3.6.1.4.1.890.1.5.13.13.34 | ||||||||||||||||||||
| SstpEnable | 1.3.6.1.4.1.890.1.5.13.13.34.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable or disable the spanning tree protocol.
| |||||||||||||||||||||
| SstpMode | 1.3.6.1.4.1.890.1.5.13.13.34.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Select the spanning mode is RSTP or MSTP.
| |||||||||||||||||||||
| Nmstp | 1.3.6.1.4.1.890.1.5.13.13.34.3 | ||||||||||||||||||||
| SmstpHelloTime | 1.3.6.1.4.1.890.1.5.13.13.34.3.1 | INTEGER (1..10) | RW | ||||||||||||||||||
scalar · INTEGER (1..10) · read-write · current The value that all bridges use for HelloTime when this bridge is acting as the root. | |||||||||||||||||||||
| SmstpMaxAge | 1.3.6.1.4.1.890.1.5.13.13.34.3.2 | INTEGER (6..40) | RW | ||||||||||||||||||
scalar · INTEGER (6..40) · read-write · current The value that all bridges use for MaxAge when this bridge is acting as the root. | |||||||||||||||||||||
| SmstpForwardDelay | 1.3.6.1.4.1.890.1.5.13.13.34.3.3 | INTEGER (4..30) | RW | ||||||||||||||||||
scalar · INTEGER (4..30) · read-write · current The value that all bridges use for ForwardDelay when this bridge is acting as the root. | |||||||||||||||||||||
| TmstpVlanTable | 1.3.6.1.4.1.890.1.5.13.13.34.3.4 | NA | |||||||||||||||||||
table · not-accessible · current This table contains one entry for each instance of MSTP. This table is supported by R1.02 and later versions. | |||||||||||||||||||||
| RmstpVlanEntry | 1.3.6.1.4.1.890.1.5.13.13.34.3.4.1 | NA | |||||||||||||||||||
row · not-accessible · current A conceptual row containing the status of the MSTP instance.
| |||||||||||||||||||||
| CmstpVlanIndex | 1.3.6.1.4.1.890.1.5.13.13.34.3.4.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Uniquely identifies an instance. | |||||||||||||||||||||
| CmstpVlans1k | 1.3.6.1.4.1.890.1.5.13.13.34.3.4.1.2 | OCTET STRING (SIZE (0..128)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-write · current A string of octets containing one bit per VLAN for VLANS with VlanIndex values 0 through 1023. The first octet corresponds to VLANs with VlanIndex values 0 through 7; the second octet to VLANs 8 through 15 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. | |||||||||||||||||||||
| CmstpVlans2k | 1.3.6.1.4.1.890.1.5.13.13.34.3.4.1.3 | OCTET STRING (SIZE (0..128)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-write · current A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values 1024 through 1031; the second octet to VLANs 1032 through 1039 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. | |||||||||||||||||||||
| CmstpVlans3k | 1.3.6.1.4.1.890.1.5.13.13.34.3.4.1.4 | OCTET STRING (SIZE (0..128)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-write · current A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values 2048 through 2055; the second octet to VLANs 2056 through 2063 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. | |||||||||||||||||||||
| CmstpVlans4k | 1.3.6.1.4.1.890.1.5.13.13.34.3.4.1.5 | OCTET STRING (SIZE (0..128)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..128)) · read-write · current A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values 3072 through 3079; the second octet to VLANs 3080 through 3087 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. | |||||||||||||||||||||
| TmstpInsTable | 1.3.6.1.4.1.890.1.5.13.13.34.3.5 | NA | |||||||||||||||||||
table · not-accessible · current Port configuration for multiple spanning trees. | |||||||||||||||||||||
| RmstpInsEntry | 1.3.6.1.4.1.890.1.5.13.13.34.3.5.1 | NA | |||||||||||||||||||
| CmstpInsIndex | 1.3.6.1.4.1.890.1.5.13.13.34.3.5.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Identifies a spanning tree. | |||||||||||||||||||||
| CmstpInsPort | 1.3.6.1.4.1.890.1.5.13.13.34.3.5.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The port number of the port for which this entry contains MSTP management information. | |||||||||||||||||||||
| CmstpInsEnable | 1.3.6.1.4.1.890.1.5.13.13.34.3.5.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The enabled/disabled status of the port.
| |||||||||||||||||||||
| CmstpInsPortPriority | 1.3.6.1.4.1.890.1.5.13.13.34.3.5.1.4 | INTEGER (0..255) | RW | ||||||||||||||||||
column · INTEGER (0..255) · read-write · current In an MSTP Bridge, the Port's Port Priority parameter value for the MSTI, i.e. the priority field for the Port Identifier for the Port for the MSTI. | |||||||||||||||||||||
| Ndiagnostic | 1.3.6.1.4.1.890.1.5.13.13.35 | ||||||||||||||||||||
| Noamloopback | 1.3.6.1.4.1.890.1.5.13.13.35.1 | ||||||||||||||||||||
| SoamloopbackTarget | 1.3.6.1.4.1.890.1.5.13.13.35.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current IfIndex of the port which would be performed oamloopback test. | |||||||||||||||||||||
| SoamloopbackOps | 1.3.6.1.4.1.890.1.5.13.13.35.1.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The manager sets value to 1 to start the oamloopback test and the agent clears the object to zero when oamloopback test is completed. | |||||||||||||||||||||
| SoamloopbackPacketNumber | 1.3.6.1.4.1.890.1.5.13.13.35.1.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Number of packets to be sent. 1~100000 | |||||||||||||||||||||
| SoamloopbackPacketSize | 1.3.6.1.4.1.890.1.5.13.13.35.1.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Size of each packet. 64~1518 | |||||||||||||||||||||
| NoamloopbackResult | 1.3.6.1.4.1.890.1.5.13.13.35.1.5 | ||||||||||||||||||||
| SoamloopbackRecvCnt | 1.3.6.1.4.1.890.1.5.13.13.35.1.5.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Number of packets received. | |||||||||||||||||||||
| SoamloopbackElapseTime | 1.3.6.1.4.1.890.1.5.13.13.35.1.5.2 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current oamloopback test elapsed time. | |||||||||||||||||||||
| SoamloopbackErrorStatus | 1.3.6.1.4.1.890.1.5.13.13.35.1.5.3 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current oamloopback test status.
| |||||||||||||||||||||
| NoamSetup | 1.3.6.1.4.1.890.1.5.13.13.36 | ||||||||||||||||||||
| ToamPortTable | 1.3.6.1.4.1.890.1.5.13.13.36.1 | NA | |||||||||||||||||||
table · not-accessible · current The table contains OAM (Operations, Administration, and Maintenance) port configuration. | |||||||||||||||||||||
| RoamPortEntry | 1.3.6.1.4.1.890.1.5.13.13.36.1.1 | NA | |||||||||||||||||||
| CoamPortFunctionsSupported | 1.3.6.1.4.1.890.1.5.13.13.36.1.1.1 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current The OAM functions supported on this Ethernet-like interface. OAM consists of separate functional sets beyond
the basic discovery process that is always required. These functional groups can be supported independently by
any implementation. These values are communicated to the peer via the local configuration field of Information
OAMPDUs.
Setting 'unidirectionalSupport(0)' indicates that the OA entity supports the transmission of OAMPDUs on links
that are operating in unidirectional mode (traffic flowing in one direction only).
Setting 'loopbackSupport(1)' indicates that the OAM entity can initiate and respond to loopback commands.
Setting 'eventSupport(2)' indicates that the OAM entity can send and receive Event Notification OAMPDUs.
Setting 'variableSupport(3)' indicates that the OAM entity can send and receive Variable Request and Response
OAMPDUs.
| |||||||||||||||||||||
| NzyxelLldp | 1.3.6.1.4.1.890.1.5.13.13.37 | ||||||||||||||||||||
| NzyxelLldpSetup | 1.3.6.1.4.1.890.1.5.13.13.37.1 | ||||||||||||||||||||
| SzyLldpState | 1.3.6.1.4.1.890.1.5.13.13.37.1.1 | EnabledStatus | RW | ||||||||||||||||||
scalar · EnabledStatus · read-write · current Enable/Disable LLDP on the switch. The Link Layer Discover Protocol (LLDP) is to discover and make available physical topology information for network management. This protocol will advertise information useful for discovering pertinent information about a remote port and to populate topology MIB. | |||||||||||||||||||||
| SzyLldpLastUpdatedTime | 1.3.6.1.4.1.890.1.5.13.13.37.1.2 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current Last updated time (Y-M-D hh:mm:ss). | |||||||||||||||||||||
| TzyLldpConfigTable | 1.3.6.1.4.1.890.1.5.13.13.37.1.3 | NA | |||||||||||||||||||
| RzyLldpConfigEntry | 1.3.6.1.4.1.890.1.5.13.13.37.1.3.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CzyLldpConfigManAddrPortsTxEnable | 1.3.6.1.4.1.890.1.5.13.13.37.1.3.1.1 | OCTET STRING (SIZE (0..64)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..64)) · read-write · current A set of ports that are identified by a PortList, in which each port is represented as a bit. The corresponding local system management address instance will be transmitted on the member ports of the lldpManAddrPortsTxEnable. The default value for lldpConfigManAddrPortsTxEnable object is empty binary string, which means no ports are specified for advertising indicated management address instance. | |||||||||||||||||||||
| TzyLldpClearTable | 1.3.6.1.4.1.890.1.5.13.13.37.1.4 | NA | |||||||||||||||||||
| RzyLldpClearEntry | 1.3.6.1.4.1.890.1.5.13.13.37.1.4.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CzyLldpRemoteInfoClear | 1.3.6.1.4.1.890.1.5.13.13.37.1.4.1.1 | EnabledStatus | RW | ||||||||||||||||||
column · EnabledStatus · read-write · current Clear all the LLDP remote information. | |||||||||||||||||||||
| CzyLldpRemoteInfoClearPorts | 1.3.6.1.4.1.890.1.5.13.13.37.1.4.1.2 | PortList | RW | ||||||||||||||||||
column · PortList · read-write · current Clear the LLDP remote informationof of the port(s). | |||||||||||||||||||||
| CzyLldpStatisticsClear | 1.3.6.1.4.1.890.1.5.13.13.37.1.4.1.3 | EnabledStatus | RW | ||||||||||||||||||
column · EnabledStatus · read-write · current Clear all the LLDP statistics. | |||||||||||||||||||||
| NzyxelLldpStatus | 1.3.6.1.4.1.890.1.5.13.13.37.2 | ||||||||||||||||||||
| TzyLldpStatsTable | 1.3.6.1.4.1.890.1.5.13.13.37.2.4 | NA | |||||||||||||||||||
| RzyLldpStatsEntry | 1.3.6.1.4.1.890.1.5.13.13.37.2.4.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CzyLldpStatsRemTablesLastChangeTime | 1.3.6.1.4.1.890.1.5.13.13.37.2.4.1.1 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Last updated time (Y-M-D hh:mm:ss). | |||||||||||||||||||||
| CzyLldpStatsRemTablesInserts | 1.3.6.1.4.1.890.1.5.13.13.37.2.4.1.2 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The number of times the complete set of information advertised by a particular MSAP has been inserted into tables contained in lldpRemoteSystemsData and lldpExtensions objects. The complete set of information received from a particular MSAP should be inserted into related tables. If partial information cannot be inserted for a reason such as lack of resources, all of the complete set of information should be removed. This counter should be incremented only once after the complete set of information is successfully recorded in all related tables. Any failures during inserting information set which result in deletion of previously inserted information should not trigger any changes in lldpStatsRemTablesInserts since the insert is not completed yet or or in lldpStatsRemTablesDeletes, since the deletion would only be a partial deletion. If the failure was the result of lack of resources, the lldpStatsRemTablesDrops counter should be incremented once.
| |||||||||||||||||||||
| CzyLldpStatsRemTablesDeletes | 1.3.6.1.4.1.890.1.5.13.13.37.2.4.1.3 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objects. This counter should be incremented only once when the complete set of information is completely deleted from all related tables. Partial deletions, such as deletion of rows associated with a particular MSAP from some tables, but not from all tables are not allowed, thus should not change the value of this counter.
| |||||||||||||||||||||
| CzyLldpStatsRemTablesDrops | 1.3.6.1.4.1.890.1.5.13.13.37.2.4.1.4 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The number of times the complete set of information advertised by a particular MSAP could not be entered into tables contained in lldpRemoteSystemsData and lldpExtensions objects because of insufficient resources.
| |||||||||||||||||||||
| CzyLldpStatsRemTablesAgeouts | 1.3.6.1.4.1.890.1.5.13.13.37.2.4.1.5 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objects because the information timeliness interval has expired. This counter should be incremented only once when the complete set of information is completely invalidated (aged out) from all related tables. Partial aging, similar to deletion case, is not allowed, and thus, should not change the value of this counter. | |||||||||||||||||||||
| CzyLldpSlotNum | 1.3.6.1.4.1.890.1.5.13.13.37.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current slot number | |||||||||||||||||||||
| Nhostprotect | 1.3.6.1.4.1.890.1.5.13.13.38 | ||||||||||||||||||||
| NhostprotectConfig | 1.3.6.1.4.1.890.1.5.13.13.38.1 | ||||||||||||||||||||
| ThostprotectConfigTable | 1.3.6.1.4.1.890.1.5.13.13.38.1.1 | NA | mandatory | ||||||||||||||||||
| RhostprotectConfigEntry | 1.3.6.1.4.1.890.1.5.13.13.38.1.1.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory
| |||||||||||||||||||||
| ChostprotectProtocol | 1.3.6.1.4.1.890.1.5.13.13.38.1.1.1.1 | INTEGER | RO | mandatory | |||||||||||||||||
column · INTEGER · read-only · mandatory
| |||||||||||||||||||||
| ChostprotectRatelimit | 1.3.6.1.4.1.890.1.5.13.13.38.1.1.1.2 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory Rate-limit Setting: 10~500 pps (0 : No limit) | |||||||||||||||||||||
| NhostprotectStatistic | 1.3.6.1.4.1.890.1.5.13.13.38.2 | ||||||||||||||||||||
| ThostprotectStatisticTable | 1.3.6.1.4.1.890.1.5.13.13.38.2.1 | NA | mandatory | ||||||||||||||||||
| RhostprotectStatisticEntry | 1.3.6.1.4.1.890.1.5.13.13.38.2.1.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory | |||||||||||||||||||||
| ChostprotectStatisticProtocol | 1.3.6.1.4.1.890.1.5.13.13.38.2.1.1.1 | INTEGER | RO | mandatory | |||||||||||||||||
column · INTEGER · read-only · mandatory
| |||||||||||||||||||||
| ChostprotectStatisticRxPkt | 1.3.6.1.4.1.890.1.5.13.13.38.2.1.1.2 | Counter32 | RW | mandatory | |||||||||||||||||
| ChostprotectStatisticRxDrop | 1.3.6.1.4.1.890.1.5.13.13.38.2.1.1.3 | Counter32 | RW | mandatory | |||||||||||||||||
| ShostprotectClear | 1.3.6.1.4.1.890.1.5.13.13.38.2.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Set 1 to clear all host protection statistic | |||||||||||||||||||||
| NerpsSetup | 1.3.6.1.4.1.890.1.5.13.13.39 | ||||||||||||||||||||
| SerpsState | 1.3.6.1.4.1.890.1.5.13.13.39.1 | EnabledStatus | RW | ||||||||||||||||||
| TerpsRingTable | 1.3.6.1.4.1.890.1.5.13.13.39.2 | NA | |||||||||||||||||||
| RerpsRingEntry | 1.3.6.1.4.1.890.1.5.13.13.39.2.1 | NA | |||||||||||||||||||
| CerpsPort0 | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Erps ring port0. | |||||||||||||||||||||
| CerpsPort1 | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Erps ring port1. | |||||||||||||||||||||
| CerpsRingId | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Erps ring Id. | |||||||||||||||||||||
| CerpsCcmPort0GroupName | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.4 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current Erps ring port0 ccm group name. | |||||||||||||||||||||
| CerpsCcmPort0Level | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Erps ring port0 ccm levle. | |||||||||||||||||||||
| CerpsCcmPort0Vlan | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Erps ring port0 ccm vlan. | |||||||||||||||||||||
| CerpsCcmPort0TxName | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Erps ring port0 ccm tx name. | |||||||||||||||||||||
| CerpsCcmPort0Period | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Erps ring port0 ccm period.
| |||||||||||||||||||||
| CerpsCcmPort0Priority | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Erps ring port0 ccm priority. | |||||||||||||||||||||
| CerpsCcmPort0RxName | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.10 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Erps ring port 0 ccm rx name. | |||||||||||||||||||||
| CerpsCcmPort1GroupName | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.11 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current Erps ring port1 ccm group name. | |||||||||||||||||||||
| CerpsCcmPort1Level | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.12 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Erps ring port1 ccm levle. | |||||||||||||||||||||
| CerpsCcmPort1Vlan | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.13 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Erps ring port1 ccm vlan. | |||||||||||||||||||||
| CerpsCcmPort1TxName | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.14 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Erps ring port1 ccm tx name. | |||||||||||||||||||||
| CerpsCcmPort1Period | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.15 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Erps ring port1 ccm period.
| |||||||||||||||||||||
| CerpsCcmPort1Priority | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.16 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Erps ring port1 ccm priority. | |||||||||||||||||||||
| CerpsCcmPort1RxName | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.17 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Erps ring port1 ccm rx name. | |||||||||||||||||||||
| CerpsRapsPort0Vlan | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.18 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Erps ring port0 raps vlan. | |||||||||||||||||||||
| CerpsRapsPort0priority | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.19 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Erps ring port0 raps priority. | |||||||||||||||||||||
| CerpsRapsPort0Level | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.20 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Erps ring port0 rap level. | |||||||||||||||||||||
| CerpsRapsPort1Vlan | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.21 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Erps ring port1 raps vlan. | |||||||||||||||||||||
| CerpsRapsPort1priority | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.22 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Erps ring port1 raps priority. | |||||||||||||||||||||
| CerpsRapsPort1Level | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.23 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Erps ring port1 raps level. | |||||||||||||||||||||
| CerpsRevertiveMode | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.24 | EnabledStatus | RW | ||||||||||||||||||
column · EnabledStatus · read-write · current Erps ring RevertiveMode enable/disable. | |||||||||||||||||||||
| CerpsWtr | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.25 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Erps ring WTR. | |||||||||||||||||||||
| CerpsRplOwner | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.26 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Erps ring owner port.
| |||||||||||||||||||||
| CerpsRplNeighbour | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.27 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Erps ring neighbour port.
| |||||||||||||||||||||
| CerpsTunnelPort | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.28 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Erps ring tunnel port.
| |||||||||||||||||||||
| CerpsRingRowStatus | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.29 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Erps ring enable/disable. | |||||||||||||||||||||
| CerpsRingPort0CcmStatus | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.30 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Erps ring ccm port0 status.
| |||||||||||||||||||||
| CerpsRingPort1CcmStatus | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.31 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Erps ring ccm port1 status.
| |||||||||||||||||||||
| CerpsRingPort0Status | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.32 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Erps ring port0 status.
| |||||||||||||||||||||
| CerpsRingPort1Status | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.33 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Erps ring port1 status.
| |||||||||||||||||||||
| CerpsRingIndex | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.34 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Erps ring index. | |||||||||||||||||||||
| Nerrdis | 1.3.6.1.4.1.890.1.5.13.13.40 | ||||||||||||||||||||
| SerrdisReason | 1.3.6.1.4.1.890.1.5.13.13.40.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Cause reason, Plz refer errdisReasonName for protocol name | |||||||||||||||||||||
| SerrdisReasonName | 1.3.6.1.4.1.890.1.5.13.13.40.2 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current Cause reason name | |||||||||||||||||||||
| TerrdisRecoveryReasonTable | 1.3.6.1.4.1.890.1.5.13.13.40.3 | NA | mandatory | ||||||||||||||||||
| RerrdisRecoveryReasonEntry | 1.3.6.1.4.1.890.1.5.13.13.40.3.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory
| |||||||||||||||||||||
| CerrdisRecoveryReasonActive | 1.3.6.1.4.1.890.1.5.13.13.40.3.1.1 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory
| |||||||||||||||||||||
| CerrdisRecoveryReasonInterval | 1.3.6.1.4.1.890.1.5.13.13.40.3.1.2 | INTEGER (30..86400) | RW | mandatory | |||||||||||||||||
| TerrdisDetectReasonTable | 1.3.6.1.4.1.890.1.5.13.13.40.4 | NA | mandatory | ||||||||||||||||||
| RerrdisDetectReasonEntry | 1.3.6.1.4.1.890.1.5.13.13.40.4.1 | NA | mandatory | ||||||||||||||||||
| CerrdisDetectReasonEnable | 1.3.6.1.4.1.890.1.5.13.13.40.4.1.1 | EnabledStatus | RW | mandatory | |||||||||||||||||
| CerrdisDetectReasonMode | 1.3.6.1.4.1.890.1.5.13.13.40.4.1.2 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory
| |||||||||||||||||||||
| CerrdisDetectUpperbound | 1.3.6.1.4.1.890.1.5.13.13.40.4.1.3 | INTEGER (24..200) | RW | mandatory | |||||||||||||||||
column · INTEGER (24..200) · read-write · mandatory minimum scale is 8 pkt/s | |||||||||||||||||||||
| TerrdisPortTable | 1.3.6.1.4.1.890.1.5.13.13.40.5 | NA | |||||||||||||||||||
table · not-accessible · current Genni Configure. | |||||||||||||||||||||
| RerrdisPortEntry | 1.3.6.1.4.1.890.1.5.13.13.40.5.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CerrdisPortThreshold | 1.3.6.1.4.1.890.1.5.13.13.40.5.1.1 | INTEGER (20..2000) | RW | ||||||||||||||||||
column · INTEGER (20..2000) · read-write · current Detect Threshold | |||||||||||||||||||||
| TerrdisStatusTable | 1.3.6.1.4.1.890.1.5.13.13.40.6 | NA | mandatory | ||||||||||||||||||
| RerrdisStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.40.6.1 | NA | mandatory | ||||||||||||||||||
| CerrdisStatusIfindex | 1.3.6.1.4.1.890.1.5.13.13.40.6.1.1 | INTEGER | RO | ||||||||||||||||||
| CerrdisStatusReason | 1.3.6.1.4.1.890.1.5.13.13.40.6.1.2 | INTEGER | RO | ||||||||||||||||||
| CerrdisStatusDetectMode | 1.3.6.1.4.1.890.1.5.13.13.40.6.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current
| |||||||||||||||||||||
| CerrdisStatusDetectTime | 1.3.6.1.4.1.890.1.5.13.13.40.6.1.4 | DisplayString | RO | ||||||||||||||||||
| CerrdisStatusRecoveryTimeleft | 1.3.6.1.4.1.890.1.5.13.13.40.6.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Time left for recovery (secs). When recovery is inactive, it would be zero. | |||||||||||||||||||||
| NerrdisClear | 1.3.6.1.4.1.890.1.5.13.13.40.7 | ||||||||||||||||||||
| SerrdisClearDetected | 1.3.6.1.4.1.890.1.5.13.13.40.7.1 | EnabledStatus | RW | ||||||||||||||||||
scalar · EnabledStatus · read-write · current Clear all detected. | |||||||||||||||||||||
| SerrdisClearDetectedPorts | 1.3.6.1.4.1.890.1.5.13.13.40.7.2 | PortList | RW | ||||||||||||||||||
scalar · PortList · read-write · current Clear the detected status by port(s). | |||||||||||||||||||||
| SerrdisClearDetectedReason | 1.3.6.1.4.1.890.1.5.13.13.40.7.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Clear the detected status by reason. | |||||||||||||||||||||
| SerrdisClearStatisticPorts | 1.3.6.1.4.1.890.1.5.13.13.40.7.4 | PortList | RW | ||||||||||||||||||
scalar · PortList · read-write · current Clear the statistic by port(s). | |||||||||||||||||||||
| NerrdisTrapNotifications | 1.3.6.1.4.1.890.1.5.13.13.40.8 | ||||||||||||||||||||
| !errdisTrap | 1.3.6.1.4.1.890.1.5.13.13.40.8.1 | ||||||||||||||||||||
notification · current | |||||||||||||||||||||
| !errdisTrapType | 1.3.6.1.4.1.890.1.5.13.13.40.8.2 | ||||||||||||||||||||
| TerrdisStatisticTable | 1.3.6.1.4.1.890.1.5.13.13.40.9 | NA | mandatory | ||||||||||||||||||
| RerrdisStatisticEntry | 1.3.6.1.4.1.890.1.5.13.13.40.9.1 | NA | mandatory | ||||||||||||||||||
| CerrdisStatisticIfindex | 1.3.6.1.4.1.890.1.5.13.13.40.9.1.1 | INTEGER | RO | ||||||||||||||||||
| CerrdisStatisticReason | 1.3.6.1.4.1.890.1.5.13.13.40.9.1.2 | INTEGER | RO | ||||||||||||||||||
| CerrdisStatisticDetected | 1.3.6.1.4.1.890.1.5.13.13.40.9.1.3 | INTEGER | RO | ||||||||||||||||||
| CerrdisStatisticRecovery | 1.3.6.1.4.1.890.1.5.13.13.40.9.1.4 | INTEGER | RO | ||||||||||||||||||
| Nprotectswitch | 1.3.6.1.4.1.890.1.5.13.13.41 | ||||||||||||||||||||
| TprotectswitchConfigTable | 1.3.6.1.4.1.890.1.5.13.13.41.1 | NA | |||||||||||||||||||
table · not-accessible · current The table contains protect switch configuration. | |||||||||||||||||||||
| RprotectswitchConfigEntry | 1.3.6.1.4.1.890.1.5.13.13.41.1.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CprotectswitchGroupId | 1.3.6.1.4.1.890.1.5.13.13.41.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Group ID of protectswitch function. | |||||||||||||||||||||
| CprotectswitchMemberPort | 1.3.6.1.4.1.890.1.5.13.13.41.1.1.2 | PortList | RW | ||||||||||||||||||
column · PortList · read-write · current Member ports of the protect switch function. | |||||||||||||||||||||
| CprotectswitchPreemptMode | 1.3.6.1.4.1.890.1.5.13.13.41.1.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Preempt mode of the protect switch function.
| |||||||||||||||||||||
| CprotectswitchPreemptDelay | 1.3.6.1.4.1.890.1.5.13.13.41.1.1.4 | INTEGER (0..60) | RW | ||||||||||||||||||
column · INTEGER (0..60) · read-write · current preempt delay time of the protect switch function. | |||||||||||||||||||||
| TprotectswitchStatusTable | 1.3.6.1.4.1.890.1.5.13.13.41.2 | NA | |||||||||||||||||||
table · not-accessible · current The table contains protect switch status. | |||||||||||||||||||||
| RprotectswitchStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.41.2.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CgroupId | 1.3.6.1.4.1.890.1.5.13.13.41.2.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Group ID of protectswitch function. | |||||||||||||||||||||
| CactivePort | 1.3.6.1.4.1.890.1.5.13.13.41.2.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Active port of the protect switch function. | |||||||||||||||||||||
| CbackupPort | 1.3.6.1.4.1.890.1.5.13.13.41.2.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Backup port of the protect switch function. | |||||||||||||||||||||
| CactivePortStatus | 1.3.6.1.4.1.890.1.5.13.13.41.2.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Active port status of the protect switch function. | |||||||||||||||||||||
| CbackupPortStatus | 1.3.6.1.4.1.890.1.5.13.13.41.2.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Backup port status of the protect switch function. | |||||||||||||||||||||
| CactivePortState | 1.3.6.1.4.1.890.1.5.13.13.41.2.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Active port state of the protect switch function. | |||||||||||||||||||||
| CbackupPortState | 1.3.6.1.4.1.890.1.5.13.13.41.2.1.7 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Backup port state of the protect switch function. | |||||||||||||||||||||
| CactivePortBandwidth | 1.3.6.1.4.1.890.1.5.13.13.41.2.1.8 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Active port bandwidth of the protect switch function. | |||||||||||||||||||||
| CbackupPortBandwidth | 1.3.6.1.4.1.890.1.5.13.13.41.2.1.9 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Backup port bandwidth of the protect switch function. | |||||||||||||||||||||
| CactivePortTrunkingMember | 1.3.6.1.4.1.890.1.5.13.13.41.2.1.10 | PortList | RO | ||||||||||||||||||
column · PortList · read-only · current Active port trunking member of the protect switch function. | |||||||||||||||||||||
| CbackupPortTrunkingMember | 1.3.6.1.4.1.890.1.5.13.13.41.2.1.11 | PortList | RO | ||||||||||||||||||
column · PortList · read-only · current Backup port trunking member of the protect switch function. | |||||||||||||||||||||
Textual conventions
IpInterfaceINTEGERipIfInband(1)ipIfOutband(0)ipIfOutband(0) - outband ip interface. ipIfInband(1) - inband ip interface.
RemoteOnuStatusINTEGERiS(1)oOS(0)oOS-AD(7)oOS-AF(16)oOS-CD(4)oOS-CO(11)oOS-DG(18)oOS-GF(15)oOS-GS(14)oOS-LO(2)oOS-LS(19)oOS-NO(13)oOS-NP(5)oOS-NR(3)oOS-OD(8)oOS-OO(9)oOS-PF(6)oOS-SB(20)oOS-TM(10)oOS-UO(12)oOS-VO(17)Objects with this syntax are status parameters that reflects the status for a given provision entity of an ONU. Each provision entity has different error checking list, system reports the first failure when it goes through the list. And therefore when it shows a specific OOS type OOS-XX, doesn't mean the OOS-XX is the only failure of this entity, but the first failure that user should solve before checking next checking item of the list. Status can only be IS when it passes all items in the checking list. Specified as an INTEGER, the values are: OOS(0) -- Out Of Service - Obsoleted status. IS(1) -- In Service. This entity passes all error checking. OOS-LO(2) -- Out Of Service - Line card Oos. (The related line card is OOS) OOS-NR(3) -- Out Of Service - Not Registered. (ONU is not registered) OOS-CD(4) -- Out Of Service - omcC Down. (The OMCC is blocked) OOS-NP(5) -- Out Of Service - Not Provisioned. (This entity is not ever provisioned) OOS-PF(6) -- Out Of Service - Provision Failed. (ONU replies error during provision) OOS-AD(7) -- Out Of Service - Admin Down. (The entity is down administratively) OOS-OD(8) -- Out Of Service - Oper Down. (ONU reports it can't perform its function) OOS-OO(9) -- Out Of Service - Onu Oos. (The related ONU is OOS) OOS-TM(10) -- Out Of Service - Type Mismatch. (The actual type mismatches with config type) OOS-CO(11) -- Out Of Service - onu Card Oos. (The related onu card is OOS) OOS-UO(12) -- Out Of Service - Uni Oos. (The related UNI is OOS) OOS-NO(13) -- Out Of Service - Nni Oos. (The related NNI is OOS) OOS-GS(14) -- Out Of Service - Gem Suspended. (One or many of the related GEM ports are temporarily closed) OOS-GF(15) -- Out Of Service - Gem Failure. (One or many of the related GEM ports fails during creation) OOS-AF(16) -- Out Of Service - Allocid Failure. (One or many of the related allocation ID fails during creation) OOS-VO(17) -- Out Of Service - Vlan Oos. (The related VLAN service is OOS) OOS-DG(18) -- Out Of Service - Dying Gasp. (ONU was ever registered, after that, it was deregistered due to loss of power) OOS-LS(19) -- Out Of Service - Loss of Signal. (ONU was ever registered, after that, it was deregistered due to loss of signal) OOS-SB(20) -- Out Of Service - StandBy. (ONU is in standby mode in a protection group)Xdsl2ConfigRtxModeINTEGERforbidden(0)forced(2)preferred(1)test(3)Forbidden(0) - Support for G998.4 is disabled. Preferred(1) - If G998.4 is supported by the far-end, it is enabled. Forced(2) - The line will only train if G998.4 can be enabled. Test(3) - G998.4 is enabled in test mode (refer to G998.4, Clause 10.4).
Xdsl2StatusActualRaModeINTEGERdynamicRa(3)fixedRateMode(1)none(0)raInit(2)sosEnabled(4)fixedRateMode(1) - Fixed rate mode raInit(2) - Adaptive rate mode at initialization dynamicRa(3) - Dynamic rate adaptation sosEnabled(4) - SOS enabled
Xdsl2StatusRtxModeINTEGERnone(0)rtxForbidden(2)rtxInUse(1)rtxNotSupportedBoth(5)rtxNotSupportedXtuC(3)rtxNotSupportedXtuR(4)rtxInUse(1) - RTX in use. rtxForbidden(2) - RTX not in use because RTX_MODE = FORBIDDEN. rtxNotSupportedXtuC(3) - RTX not in use because it is not supported by the XTU-C. rtxNotSupportedXtuR(4) - RTX not in use because it is not supported by the XTU-R. rtxNotSupportedBoth(5) - RTX not in use because it is not supported by the XTU-C and XTU-R.
Traps / Notifications
- errdisTrap
1.3.6.1.4.1.890.1.5.13.13.40.8.1 - errdisTrapType
1.3.6.1.4.1.890.1.5.13.13.40.8.2