ZTE-AN-OPTICAL-MODULE-MIB
Zhongxing Telecom Co.,ltd. (abbr. ZTE)This MIB defines zte Access Node managed objects.
snmptranslate -m ZTE-AN-OPTICAL-MODULE-MIB -Tpsnmpwalk -v2c -c <community> -m ZTE-AN-OPTICAL-MODULE-MIB <host> 1.3.6.1.4.1.3902.1082.30.40Imports
| IF-MIB | ifAdminStatus, ifIndex, ifOperStatus, ifType |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
| ZTE-AN-SMI | zxAnInterface |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IzxAnOpticalModuleMib | 1.3.6.1.4.1.3902.1082.30.40 | |||
identity This MIB defines zte Access Node managed objects. | ||||
| NzxAnOpticalModuleGlobalObjects | 1.3.6.1.4.1.3902.1082.30.40.1 | |||
| SzxAnOpticalModuleCapabilities | 1.3.6.1.4.1.3902.1082.30.40.1.1 | Bits | RO | |
scalar · Bits · read-only · current The optical module management capabilities of this equipment.
The bit value 1 means the function represented by this bit is
supported by this equipment.
opticalModuleConfClass (0): value 1 means
zxAnOpticalModuleConfClass is supported.
opticalAlarmPrfUnit(1): value 1 means some objects in the
zxAnOpticalModuleAlmPrfTable will use the new unit, for more
information, please see the description of the object in the
zxAnOpticalModuleAlmPrfTable.
opticalModuleConfTechNorms(2): value 1 means
zxAnOpticalModuleConfTechNorms is supported.
NOTE: No recommended to display it in NMS.
| ||||
| SzxAnOptModuleIfShutdownUnplugEn | 1.3.6.1.4.1.3902.1082.30.40.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Indicates whether the zxAnOpticalModuleUnpluggedAlm should be
generated when the port the optical module plugged in has been
shutdown.
enabled(1) : The zxAnOpticalOfflineTrapEnable indicates whether the
zxAnOpticalModuleUnpluggedAlm should be generated or not.
disabled(2): The zxAnOpticalModuleUnpluggedAlm should not be
generated.
| ||||
| SzxAnOptModuleFstUnpluggedRptEn | 1.3.6.1.4.1.3902.1082.30.40.1.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Indicates whether the zxAnOpticalModuleUnpluggedAlm should be generated when the agent has detected the optical module is offline for the first time.
| ||||
| NzxAnOpticalModuleObjects | 1.3.6.1.4.1.3902.1082.30.40.2 | |||
| TzxAnOpticalModuleAlmPrfTable | 1.3.6.1.4.1.3902.1082.30.40.2.2 | NA | ||
table · not-accessible · current This table includes the optical module threshold profile. | ||||
| RzxAnOpticalModuleAlmPrfEntry | 1.3.6.1.4.1.3902.1082.30.40.2.2.1 | NA | ||
row · not-accessible · current An entry in zxAnOpticalModuleAlmPrfTable. | ||||
| CzxAnOpticalModuleAlmPrfName | 1.3.6.1.4.1.3902.1082.30.40.2.2.1.1 | DisplayString (SIZE (1..32)) | NA | |
column · DisplayString (SIZE (1..32)) · not-accessible · current A textual string containing information about the optical module alarm threshold profile name . | ||||
| CzxAnOpticalRxPwrLowerThresh | 1.3.6.1.4.1.3902.1082.30.40.2.2.1.2 | Integer32 | RC | |
column · Integer32 · read-create · current The lower limit threshold on input optical power. The alarm should be generated when zxAnOpticalIfRxPwrCurrValue is lower than this threshold. The unit is 1dBm when the value of opticalAlarmPrfUnit(1) is 1, otherwise the unit is 0.1dBm.
| ||||
| CzxAnOpticalRxPwrUpperThresh | 1.3.6.1.4.1.3902.1082.30.40.2.2.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current The upper limit threshold on input optical power. The alarm should be generated when zxAnOpticalIfRxPwrCurrValue exceeds this threshold. The unit is 1dBm when the value of opticalAlarmPrfUnit(1) is 1, otherwise the unit is 0.1dBm.
| ||||
| CzxAnOpticalTxPwrLowerThresh | 1.3.6.1.4.1.3902.1082.30.40.2.2.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current The lower limit threshold on output optical power. The alarm should be generated when zxAnOpticalIfTxPwrCurrValue is lower than this threshold. The unit is 1dBm when the value of opticalAlarmPrfUnit(1) is 1, otherwise the unit is 0.1dBm.
| ||||
| CzxAnOpticalTxPwrUpperThresh | 1.3.6.1.4.1.3902.1082.30.40.2.2.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current The upper limit threshold on output optical power. The alarm should be generated when zxAnOpticalIfTxPwrCurrValue exceeds this threshold. The unit is 1dBm when the value of opticalAlarmPrfUnit(1) is 1, otherwise the unit is 0.1dBm.
| ||||
| CzxAnOpticalBiasCurrLowerThresh | 1.3.6.1.4.1.3902.1082.30.40.2.2.1.6 | Integer32 (0..1500) | RC | |
column · Integer32 (0..1500) · read-create · current The lower limit threshold on optical modules bias current.The alarm should be generated when zxAnOpticalBiasCurrent is lower than this threshold. The unit is 1mA when the value of opticalAlarmPrfUnit(1) is 1, otherwise the unit is 0.1mA.
| ||||
| CzxAnOpticalBiasCurrUpperThresh | 1.3.6.1.4.1.3902.1082.30.40.2.2.1.7 | Integer32 (0..1500) | RC | |
column · Integer32 (0..1500) · read-create · current The upper limit threshold on optical modules bias current. The alarm should be generated when zxAnOpticalBiasCurrent exceeds this threshold. The unit is 1mA when the value of opticalAlarmPrfUnit(1) is 1, otherwise the unit is 0.1mA.
| ||||
| CzxAnOpticalVoltageLowerThresh | 1.3.6.1.4.1.3902.1082.30.40.2.2.1.8 | Integer32 (0..100) | RC | |
column · Integer32 (0..100) · read-create · current The lower limit threshold on optical modules supply voltage. The alarm should be generated when zxAnOpticalSupplyVoltage is lower than this threshold. The unit is 1 Volt when the value of opticalAlarmPrfUnit(1) is 1, otherwise the unit is 0.1 Volt.
| ||||
| CzxAnOpticalVoltageUpperThresh | 1.3.6.1.4.1.3902.1082.30.40.2.2.1.9 | Integer32 (0..100) | RC | |
column · Integer32 (0..100) · read-create · current The upper limit threshold on optical modules supply voltage. The alarm should be generated when zxAnOpticalSupplyVoltage exceeds this threshold. The unit is 1 Volt when the value of opticalAlarmPrfUnit(1) is 1, otherwise the unit is 0.1 Volt.
| ||||
| CzxAnOpticalTempLowerThresh | 1.3.6.1.4.1.3902.1082.30.40.2.2.1.10 | Integer32 (-50..100) | RC | |
column · Integer32 (-50..100) · read-create · current The lower limit threshold on optical modules temperature. The alarm should be generated when zxAnOpticalTemperature is lower than this threshold.
| ||||
| CzxAnOpticalTempUpperThresh | 1.3.6.1.4.1.3902.1082.30.40.2.2.1.11 | Integer32 (-50..100) | RC | |
column · Integer32 (-50..100) · read-create · current The upper limit threshold on optical modules temperature. The alarm should be generated when zxAnOpticalTemperature exceeds this threshold.
| ||||
| CzxAnOpticalOfflineTrapEnable | 1.3.6.1.4.1.3902.1082.30.40.2.2.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates whether optical module is online/offline traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.
| ||||
| CzxAnOpticalModuleConfClass | 1.3.6.1.4.1.3902.1082.30.40.2.2.1.13 | DisplayString (SIZE (0..32)) | RC | |
column · DisplayString (SIZE (0..32)) · read-create · current The optical module configured class. | ||||
| CzxAnOpticalModuleAlmPrfRowStatus | 1.3.6.1.4.1.3902.1082.30.40.2.2.1.50 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of this entry. | ||||
| TzxAnOpticalAlmPrfIfConfTable | 1.3.6.1.4.1.3902.1082.30.40.2.3 | NA | ||
table · not-accessible · current This table includes the optical module profile configuration. | ||||
| RzxAnOpticalAlmPrfIfConfEntry | 1.3.6.1.4.1.3902.1082.30.40.2.3.1 | NA | ||
| CzxAnOpticalIfAlmPrf | 1.3.6.1.4.1.3902.1082.30.40.2.3.1.2 | DisplayString (SIZE (1..32)) | RW | |
column · DisplayString (SIZE (1..32)) · read-write · current A textual string containing information about the optical module alarm threshold profile name . | ||||
| TzxAnOpticalModuleInfoTable | 1.3.6.1.4.1.3902.1082.30.40.2.4 | NA | ||
table · not-accessible · current This table includes the optical module information. | ||||
| RzxAnOpticalModuleInfoEntry | 1.3.6.1.4.1.3902.1082.30.40.2.4.1 | NA | ||
| CzxAnOpticalIfRxPwrCurrValue | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The optical power monitored at the input.
| ||||
| CzxAnOpticalIfTxPwrCurrValue | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The optical power monitored at the output.
| ||||
| CzxAnOpticalIfRate | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The optical module interface rate.
| ||||
| CzxAnOpticalBiasCurrent | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The optical module bias current .
| ||||
| CzxAnOpticalSupplyVoltage | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The optical module supply voltage.
| ||||
| CzxAnOpticalWavelength | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The optical module wavelength.
| ||||
| CzxAnOpticalTemperature | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The optical module temperature .
| ||||
| CzxAnOpticalFiberType | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The optical module Fiber Type.
| ||||
| CzxAnOpticalVersionLevel | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.10 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current The optical module vendor Level. | ||||
| CzxAnOpticalVendorPn | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.11 | DisplayString (SIZE (0..64)) | RO | |
column · DisplayString (SIZE (0..64)) · read-only · current The optical module vendor P/N. | ||||
| CzxAnOpticalVendorName | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.12 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The optical module vendor name. | ||||
| CzxAnOpticalVendorSn | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.13 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current The optical module vendor sn. | ||||
| CzxAnOpticalProductionDate | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.14 | DisplayString (SIZE (0..8)) | RO | |
column · DisplayString (SIZE (0..8)) · read-only · current The optical module production date. | ||||
| CzxAnOpticalModuleType | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.15 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current The optical module type. | ||||
| CzxAnOpticalFiberInterfaceType | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.16 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current The optical fiber interface. | ||||
| CzxAnOpticalMaterialNumber | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.17 | OCTET STRING (SIZE (0..20)) | RO | |
column · OCTET STRING (SIZE (0..20)) · read-only · current The material number of pin(A2). | ||||
| CzxAnOpticalRegisterData | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.18 | OCTET STRING (SIZE (0..128)) | RO | |
column · OCTET STRING (SIZE (0..128)) · read-only · current The optical module data is from register. | ||||
| CzxAnOpticalOtdrSupport | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.19 | INTEGER | RO | |
column · INTEGER · read-only · current The OTDR is supported by the optical module or not. supported(1): The optical module supports OTDR. unsupported(2): The optical module doesn't support OTDR. unknown(255): Whether the optical module supports OTDR is unknown.
| ||||
| CzxAnOpticalModuleActualClass | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.20 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The optical module actual class. | ||||
| CzxAnOpticalOtdrVersion | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.21 | DisplayString (SIZE (0..16)) | RO | |
column · DisplayString (SIZE (0..16)) · read-only · current The optical module OTDR software version. If the optical module doesn't support OTDR or the OTDR has no software version, this object will be set to an empty string. | ||||
| CzxAnOpticalTransDistanceSmLongR | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.40 | Integer32 | RO | |
column · Integer32 · read-only · current This value specifies the transfer distance that is supported by the transceiver while operating in compliance with the applicable standards using single mode based long reach fiber. The value is in units of kilometers. A value of 255 means the transceiver supports a transfer distance greater than 254 km. A value of zero means the transceiver does not support single mode fiber or that the transfer distance information must be determined from the transceiver technology.
| ||||
| CzxAnOpticalTransDistanceSmShortR | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.41 | Integer32 | RO | |
column · Integer32 · read-only · current This value specifies the transfer distance that is supported by the transceiver while operating in compliance with the applicable standards using single mode based short reach fiber. The value is in units of 100 meters. A value of 255 means the transceiver supports a transfer distance greater than 25.4 km. A value of zero means the transceiver does not support single mode fiber or that the transfer distance information must be determined from the transceiver technology.
| ||||
| CzxAnOpticalTransDistanceOm1 | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.42 | Integer32 | RO | |
column · Integer32 · read-only · current This value specifies the transfer distance that is supported by the transceiver wihle operating in compliance with applicable standards using 62.5 micron multimode OM1(200 MHz*km at 850nm, 500MHz*km at 1310mm) fiber. The value is in units of 10 meters. A value of 255 means that the transceiver supports a transfer distance greater than 2.54km. A value of zero means that the transceiver does not support 62.5 micron multimode fiber or the transfer distance must determined from the transceiver technology.
| ||||
| CzxAnOpticalTransDistanceOm2 | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.43 | Integer32 | RO | |
column · Integer32 · read-only · current This value specifies the transfer distance that is supported by the transceiver wihle operating in compliance with applicable standards using 50 micron multimode OM2(500 MHz*km at 850nm) fiber. The value is in units of 10 meters. A value of 255 means that the transceiver supports a transfer distance greater than 2.54km. A value of zero means that the transceiver does not support OM2 fiber or the transfer distance must determined from the transceiver technology.
| ||||
| CzxAnOpticalTransDistanceOm3 | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.44 | Integer32 | RO | |
column · Integer32 · read-only · current This value specifies the transfer distance that is supported by the transceiver wihle operating in compliance with applicable standards using 50 micron multimode OM3(2000 MHz*km) fiber. The value is in units of 10 meters. A value of 255 means that the transceiver supports a transfer distance greater than 2.54km. A value of zero means that the transceiver does not support OM3 fiber or the transfer distance must determined from the transceiver technology.
| ||||
| CzxAnOpticalTransDistanceCopper | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.45 | Integer32 | RO | |
column · Integer32 · read-only · current This value specifies the transfer distance that is supported by the transceiver wihle operating in compliance with applicable standards using copper cable. For active cable, this value represents actual length. The value is in units of 1 meter. A value of 255 means that the transceiver supports a transfer distance greater than 254m. A value of zero means that the transceiver does not support copper or active cables or the transfer distance must determined from the transceiver technology.
| ||||
| CzxAnOpticalPartNumber | 1.3.6.1.4.1.3902.1082.30.40.2.4.1.48 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The optical module part number. | ||||
| TzxAnOpticalAlsIfConfTable | 1.3.6.1.4.1.3902.1082.30.40.2.5 | NA | ||
table · not-accessible · current This table includes the ALS configuration of the optical module. | ||||
| RzxAnOpticalAlsIfConfEntry | 1.3.6.1.4.1.3902.1082.30.40.2.5.1 | NA | ||
| CzxAnOptAlsEnable | 1.3.6.1.4.1.3902.1082.30.40.2.5.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable the ALS function.
| ||||
| CzxAnOptAlsLaserLosDuration | 1.3.6.1.4.1.3902.1082.30.40.2.5.1.2 | Integer32 (5..200000) | RW | |
column · Integer32 (5..200000) · read-write · current This attribute specifies the value of the LOS duration. The laser will be shutdown when detected the LOS duration longer than zxAnOptAlsLaserLosDuration value. Setting this object will enable the ALS function. For C300 Series NE, the default value is 5. For C600 Series NE, the default value is 50.
| ||||
| CzxAnOptAlsLaserShutdownDuration | 1.3.6.1.4.1.3902.1082.30.40.2.5.1.3 | Integer32 (5..200000) | RW | |
column · Integer32 (5..200000) · read-write · current This attribute specifies the value of the laser shutdown duration. Setting this object will enable the ALS function.
| ||||
| CzxAnOptAlsLaserStartUpDuration | 1.3.6.1.4.1.3902.1082.30.40.2.5.1.4 | Integer32 (5..200000) | RW | |
column · Integer32 (5..200000) · read-write · current This attribute specifies the value of the laser re-open duration. Setting this object will enable the ALS function.
| ||||
| TzxAnOpticalModuleConfTable | 1.3.6.1.4.1.3902.1082.30.40.2.6 | NA | ||
table · not-accessible · current This table includes the optical module configuration. | ||||
| RzxAnOpticalModuleConfEntry | 1.3.6.1.4.1.3902.1082.30.40.2.6.1 | NA | ||
row · not-accessible · current An entry in zxAnOpticalModuleConfTable. | ||||
| CzxAnOpticalModuleConfVendorName | 1.3.6.1.4.1.3902.1082.30.40.2.6.1.1 | DisplayString (SIZE (1..32)) | NA | |
column · DisplayString (SIZE (1..32)) · not-accessible · current The optical module vendor name. | ||||
| CzxAnOpticalModuleConfVendorPn | 1.3.6.1.4.1.3902.1082.30.40.2.6.1.2 | DisplayString (SIZE (1..64)) | NA | |
column · DisplayString (SIZE (1..64)) · not-accessible · current The optical module vendor P/N. | ||||
| CzxAnOpticalModuleConfiguredClass | 1.3.6.1.4.1.3902.1082.30.40.2.6.1.3 | DisplayString (SIZE (1..32)) | RC | |
column · DisplayString (SIZE (1..32)) · read-create · current The optical module configured class. Includes the following: GPON/B+, GPON/C+, GPON/EC+, XGPON1/N1, XGPON1/N2a, EPON/PX20+, 10G-EPON/PRX30, 10G-EPON/PR30, GPON/D, XGS-PON/N1, XGS-PON/N2, XG-PON&GPON_COMBO/N1-B+, XG-PON&GPON_COMB0/N2-C+, GPON-OTDR/C+. | ||||
| CzxAnOpticalModuleConfProperty | 1.3.6.1.4.1.3902.1082.30.40.2.6.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current The property of the table record.
default: the default record, it can't be modified or
deleted by the user.
userDefined: the user-defined record.
| ||||
| CzxAnOpticalModuleConfTechNorms | 1.3.6.1.4.1.3902.1082.30.40.2.6.1.11 | DisplayString (SIZE (1..32)) | RC | |
column · DisplayString (SIZE (1..32)) · read-create · current The optical module configured technical norms. | ||||
| CzxAnOpticalModuleConfRowStatus | 1.3.6.1.4.1.3902.1082.30.40.2.6.1.50 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the rule described in zxAnLacpAggEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1). | ||||
| TzxAnOpticalModuleChanInfoTable | 1.3.6.1.4.1.3902.1082.30.40.2.10 | NA | ||
table · not-accessible · current This table includes the optical module channel information. | ||||
| RzxAnOpticalModuleChanInfoEntry | 1.3.6.1.4.1.3902.1082.30.40.2.10.1 | NA | ||
| CzxAnOpticalChanLaserSwitch | 1.3.6.1.4.1.3902.1082.30.40.2.10.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Enables or disables the laser function of the optical module channel.
| ||||
| CzxAnOpticalChanWavelength | 1.3.6.1.4.1.3902.1082.30.40.2.10.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The wavelength of the optical module channel.
| ||||
| CzxAnOpticalChanCurrTxPwr | 1.3.6.1.4.1.3902.1082.30.40.2.10.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The transmitted power of the optical module channel.
| ||||
| CzxAnOpticalChanBiasCurrent | 1.3.6.1.4.1.3902.1082.30.40.2.10.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The bias current of the optical module channel.
| ||||
| TzxAnOpticalModuleClassValueTable | 1.3.6.1.4.1.3902.1082.30.40.2.20 | NA | ||
table · not-accessible · current This table includes the optical module class value. NOTE: No recommended to develop this function in EMS. | ||||
| RzxAnOpticalModuleClassValueEntry | 1.3.6.1.4.1.3902.1082.30.40.2.20.1 | NA | ||
row · not-accessible · current An entry in zxAnOpticalModuleClassValueTable. | ||||
| CzxAnOpticalModuleClassId | 1.3.6.1.4.1.3902.1082.30.40.2.20.1.1 | Integer32 (1..256) | NA | |
column · Integer32 (1..256) · not-accessible · current The optical module class id. | ||||
| CzxAnOpticalModuleClassValue | 1.3.6.1.4.1.3902.1082.30.40.2.20.1.2 | DisplayString (SIZE (1..64)) | RO | |
column · DisplayString (SIZE (1..64)) · read-only · current The optical module class value. | ||||
| NzxAnOpticalModuleNotifications | 1.3.6.1.4.1.3902.1082.30.40.3 | |||
| !zxAnOptRxPwrUnderThreshAlm | 1.3.6.1.4.1.3902.1082.30.40.3.1 | |||
notification · current It indicates that zxAnOpticalIfRxPwrCurrValue is below the zxAnOpticalRxPwrLowerThresh. | ||||
| !zxAnOptRxPwrUnderThreshClr | 1.3.6.1.4.1.3902.1082.30.40.3.2 | |||
notification · current zxAnOptRxPwrUnderThreshAlm clear | ||||
| !zxAnOptRxPwrOverThreshAlm | 1.3.6.1.4.1.3902.1082.30.40.3.3 | |||
notification · current It indicates that zxAnOpticalIfRxPwrCurrValue is exceeds the zxAnOpticalRxPwrUpperThresh. | ||||
| !zxAnOptRxPwrOverThreshClr | 1.3.6.1.4.1.3902.1082.30.40.3.4 | |||
notification · current zxAnOptPwrRxOverThreshAlarm clear. | ||||
| !zxAnOptTxPwrUnderThreshAlm | 1.3.6.1.4.1.3902.1082.30.40.3.5 | |||
notification · current It indicates that zxAnOpticalIfTxPwrCurrValue is below the zxAnOpticalTxPwrLowerThresh. | ||||
| !zxAnOptTxPwrUnderThreshClr | 1.3.6.1.4.1.3902.1082.30.40.3.6 | |||
notification · current zxAnOptPwrTxUnderThreshAlarm clear | ||||
| !zxAnOptTxPwrOverThreshAlm | 1.3.6.1.4.1.3902.1082.30.40.3.7 | |||
notification · current It indicates that zxAnOpticalIfTxPwrCurrValue is exceeds the zxAnOpticalTxPwrUpperThresh. | ||||
| !zxAnOptTxPwrOverThreshClr | 1.3.6.1.4.1.3902.1082.30.40.3.8 | |||
notification · current zxAnOptPwrTxOverThreshAlarm clear. | ||||
| !zxAnOptBiasCurrUnderThreshAlm | 1.3.6.1.4.1.3902.1082.30.40.3.9 | |||
notification · current It indicates that zxAnOpticalBiasCurrent is below the zxAnOpticalBiasCurrLowerThresh. | ||||
| !zxAnOptBiasCurrUnderThreshClr | 1.3.6.1.4.1.3902.1082.30.40.3.10 | |||
notification · current zxAnOptBiasCurrUnderThreshAlm clear. | ||||
| !zxAnOptBiasCurrOverThreshAlm | 1.3.6.1.4.1.3902.1082.30.40.3.11 | |||
notification · current It indicates that zxAnOpticalBiasCurrent is over the zxAnOpticalBiasCurrUpperThresh. | ||||
| !zxAnOptBiasCurrOverThreshClr | 1.3.6.1.4.1.3902.1082.30.40.3.12 | |||
notification · current zxAnOptBiasCurrOverThreshAlm clear. | ||||
| !zxAnOptVoltageUnderThreshAlm | 1.3.6.1.4.1.3902.1082.30.40.3.13 | |||
notification · current It indicates that zxAnOpticalSupplyVoltage is below the zxAnOpticalVoltageLowerThresh. | ||||
| !zxAnOptVoltageUnderThreshClr | 1.3.6.1.4.1.3902.1082.30.40.3.14 | |||
notification · current zxAnOptVoltageUnderThreshAlm clear. | ||||
| !zxAnOptVoltageOverThreshAlm | 1.3.6.1.4.1.3902.1082.30.40.3.15 | |||
notification · current It indicates that zxAnOpticalSupplyVoltage is over the zxAnOpticalVoltageUpperThresh. | ||||
| !zxAnOptVoltageOverThreshClr | 1.3.6.1.4.1.3902.1082.30.40.3.16 | |||
notification · current zxAnOptVoltageOverThreshAlm clear. | ||||
| !zxAnOptTempUnderThreshAlm | 1.3.6.1.4.1.3902.1082.30.40.3.17 | |||
notification · current It indicates that zxAnOpticalTemperature is below the zxAnOpticalTempLowerThresh. | ||||
| !zxAnOptTempUnderThreshClr | 1.3.6.1.4.1.3902.1082.30.40.3.18 | |||
notification · current zxAnOptTempUnderThreshAlm clear. | ||||
| !zxAnOptTempOverThreshAlm | 1.3.6.1.4.1.3902.1082.30.40.3.19 | |||
notification · current It indicates that zxAnOpticalTemperature is over the zxAnOpticalTempUpperThresh. | ||||
| !zxAnOptTempOverThreshClr | 1.3.6.1.4.1.3902.1082.30.40.3.20 | |||
notification · current zxAnOptTempOverThreshAlm clear. | ||||
| !zxAnOpticalModuleUnpluggedAlm | 1.3.6.1.4.1.3902.1082.30.40.3.21 | |||
notification · current The alarm occurred when optical module is not online.
| ||||
| !zxAnOpticalModuleUnpluggedClr | 1.3.6.1.4.1.3902.1082.30.40.3.22 | |||
notification · current The alarm restore when optical module is online.
| ||||
| !zxAnOptModuleClassMismatchAlm | 1.3.6.1.4.1.3902.1082.30.40.3.23 | |||
notification · current A zxAnOptModuleClassMismatchAlm trap is sent when the agent has detected that the optical module has plugged in, but zxAnOpticalModuleConfClass is not same as zxAnOpticalModuleActualClass. | ||||
| !zxAnOptModuleClassMismatchClr | 1.3.6.1.4.1.3902.1082.30.40.3.24 | |||
notification · current A zxAnOptModuleClassMismatchClr trap is sent when the agent has detected that the optical module has plugged in, and zxAnOpticalModuleConfClass is same as zxAnOpticalModuleActualClass. | ||||
| !zxAnOptChanTxPwrUnderThreshAlm | 1.3.6.1.4.1.3902.1082.30.40.3.51 | |||
notification · current A zxAnOptChanTxPwrUnderThreshAlm trap is sent when the agent has detected that the zxAnOpticalChanCurrTxPwr has been less than the zxAnOpticalTxPwrLowerThresh. | ||||
| !zxAnOptChanTxPwrUnderThreshClr | 1.3.6.1.4.1.3902.1082.30.40.3.52 | |||
notification · current A zxAnOptChanTxPwrUnderThreshClr trap is sent when the zxAnOptChanTxPwrUnderThreshAlm is cleared. | ||||
| !zxAnOptChanTxPwrOverThreshAlm | 1.3.6.1.4.1.3902.1082.30.40.3.53 | |||
notification · current A zxAnOptChanTxPwrOverThreshAlm trap is sent when the agent has detected that the zxAnOpticalChanCurrTxPwr has been exceeded the zxAnOpticalTxPwrUpperThresh. | ||||
| !zxAnOptChanTxPwrOverThreshClr | 1.3.6.1.4.1.3902.1082.30.40.3.54 | |||
notification · current A zxAnOptChanTxPwrOverThreshClr trap is sent when the zxAnOptChanTxPwrOverThreshAlm is cleared. | ||||
| !zxAnOptChanBiasUnderThreshAlm | 1.3.6.1.4.1.3902.1082.30.40.3.55 | |||
notification · current A zxAnOptChanBiasUnderThreshAlm trap is sent when the agent has detected that the zxAnOpticalChanBiasCurrent has been less than the zxAnOpticalBiasCurrLowerThresh. | ||||
| !zxAnOptChanBiasUnderThreshClr | 1.3.6.1.4.1.3902.1082.30.40.3.56 | |||
notification · current A zxAnOptChanBiasCurrUnderThreshClr trap is sent when the zxAnOptChanBiasUnderThreshAlm is cleared. | ||||
| !zxAnOptChanBiasOverThreshAlm | 1.3.6.1.4.1.3902.1082.30.40.3.57 | |||
notification · current A zxAnOptChanBiasOverThreshAlm trap is sent when the agent has detected that the zxAnOpticalChanBiasCurrent has been exceeded the zxAnOpticalBiasCurrUpperThresh. | ||||
| !zxAnOptChanBiasOverThreshClr | 1.3.6.1.4.1.3902.1082.30.40.3.58 | |||
notification · current A zxAnOptChanBiasOverThreshClr trap is sent when the zxAnOptChanBiasOverThreshAlm is cleared. | ||||
| !zxAnOptEponGponMismatchAlm | 1.3.6.1.4.1.3902.1082.30.40.3.59 | |||
notification · current A zxAnOptEponGponMismatchAlm trap is sent when the agent has detected that the GPON optical module is plugged in the EPON port or the EPON optical module is plugged in the GPON port.
| ||||
| !zxAnOptEponGponMismatchClr | 1.3.6.1.4.1.3902.1082.30.40.3.60 | |||
notification · current A zxAnOptEponGponMismatchClr trap is sent when the zxAnOptEponGponMismatchAlm is cleared.
| ||||
| NzxAnOpticalModuleConformance | 1.3.6.1.4.1.3902.1082.30.40.4 | |||
Traps / Notifications
- zxAnOptBiasCurrOverThreshAlm
1.3.6.1.4.1.3902.1082.30.40.3.11 - zxAnOptBiasCurrOverThreshClr
1.3.6.1.4.1.3902.1082.30.40.3.12 - zxAnOptBiasCurrUnderThreshAlm
1.3.6.1.4.1.3902.1082.30.40.3.9 - zxAnOptBiasCurrUnderThreshClr
1.3.6.1.4.1.3902.1082.30.40.3.10 - zxAnOptChanBiasOverThreshAlm
1.3.6.1.4.1.3902.1082.30.40.3.57 - zxAnOptChanBiasOverThreshClr
1.3.6.1.4.1.3902.1082.30.40.3.58 - zxAnOptChanBiasUnderThreshAlm
1.3.6.1.4.1.3902.1082.30.40.3.55 - zxAnOptChanBiasUnderThreshClr
1.3.6.1.4.1.3902.1082.30.40.3.56 - zxAnOptChanTxPwrOverThreshAlm
1.3.6.1.4.1.3902.1082.30.40.3.53 - zxAnOptChanTxPwrOverThreshClr
1.3.6.1.4.1.3902.1082.30.40.3.54 - zxAnOptChanTxPwrUnderThreshAlm
1.3.6.1.4.1.3902.1082.30.40.3.51 - zxAnOptChanTxPwrUnderThreshClr
1.3.6.1.4.1.3902.1082.30.40.3.52 - zxAnOptEponGponMismatchAlm
1.3.6.1.4.1.3902.1082.30.40.3.59 - zxAnOptEponGponMismatchClr
1.3.6.1.4.1.3902.1082.30.40.3.60 - zxAnOptModuleClassMismatchAlm
1.3.6.1.4.1.3902.1082.30.40.3.23 - zxAnOptModuleClassMismatchClr
1.3.6.1.4.1.3902.1082.30.40.3.24 - zxAnOptRxPwrOverThreshAlm
1.3.6.1.4.1.3902.1082.30.40.3.3 - zxAnOptRxPwrOverThreshClr
1.3.6.1.4.1.3902.1082.30.40.3.4 - zxAnOptRxPwrUnderThreshAlm
1.3.6.1.4.1.3902.1082.30.40.3.1 - zxAnOptRxPwrUnderThreshClr
1.3.6.1.4.1.3902.1082.30.40.3.2 - zxAnOptTempOverThreshAlm
1.3.6.1.4.1.3902.1082.30.40.3.19 - zxAnOptTempOverThreshClr
1.3.6.1.4.1.3902.1082.30.40.3.20 - zxAnOptTempUnderThreshAlm
1.3.6.1.4.1.3902.1082.30.40.3.17 - zxAnOptTempUnderThreshClr
1.3.6.1.4.1.3902.1082.30.40.3.18 - zxAnOptTxPwrOverThreshAlm
1.3.6.1.4.1.3902.1082.30.40.3.7 - zxAnOptTxPwrOverThreshClr
1.3.6.1.4.1.3902.1082.30.40.3.8 - zxAnOptTxPwrUnderThreshAlm
1.3.6.1.4.1.3902.1082.30.40.3.5 - zxAnOptTxPwrUnderThreshClr
1.3.6.1.4.1.3902.1082.30.40.3.6 - zxAnOptVoltageOverThreshAlm
1.3.6.1.4.1.3902.1082.30.40.3.15 - zxAnOptVoltageOverThreshClr
1.3.6.1.4.1.3902.1082.30.40.3.16 - zxAnOptVoltageUnderThreshAlm
1.3.6.1.4.1.3902.1082.30.40.3.13 - zxAnOptVoltageUnderThreshClr
1.3.6.1.4.1.3902.1082.30.40.3.14 - zxAnOpticalModuleUnpluggedAlm
1.3.6.1.4.1.3902.1082.30.40.3.21 - zxAnOpticalModuleUnpluggedClr
1.3.6.1.4.1.3902.1082.30.40.3.22