ZTE-AN-ENVMON-MIB
Zhongxing Telecom Co.,ltd. (abbr. ZTE)This MIB defines zte Access Node managed environment monitor.
snmptranslate -m ZTE-AN-ENVMON-MIB -Tpsnmpwalk -v2c -c <community> -m ZTE-AN-ENVMON-MIB <host> 1.3.6.1.4.1.3902.1082.10.10Imports
| HC-PerfHist-TC-MIB | HCPerfCurrentCount |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| ZTE-AN-SMI | zxAccessNode, zxAnEquipment |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IzxAnEnvMonMib | 1.3.6.1.4.1.3902.1082.10.10 | ||||||||||||||||||||
identity This MIB defines zte Access Node managed environment monitor. | |||||||||||||||||||||
| NzxAnEnvMonGlobalObjects | 1.3.6.1.4.1.3902.1082.10.10.1 | ||||||||||||||||||||
| SzxAnEnvMonCapabilities | 1.3.6.1.4.1.3902.1082.10.10.1.1 | Bits | RO | \x99\xc0 | |||||||||||||||||
scalar · Bits · read-only · current The environment management capabilities of this equipment.The bit value 1 means the function represented by this bit is supported by this equipment. NOTE: Not recommended to display it in NMS.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NzxAnEnvMonObjects | 1.3.6.1.4.1.3902.1082.10.10.2 | ||||||||||||||||||||
| NzxAnEnvParamObjects | 1.3.6.1.4.1.3902.1082.10.10.2.1 | ||||||||||||||||||||
| NzxAnEnvParamGlobalObjects | 1.3.6.1.4.1.3902.1082.10.10.2.1.1 | ||||||||||||||||||||
| SzxAnEnvCardShutdownReason | 1.3.6.1.4.1.3902.1082.10.10.2.1.1.1 | INTEGER | AN | ||||||||||||||||||
scalar · INTEGER · accessible-for-notify · current The alarm reason of zxAnEnvCardShutdownAlm. envHighTemperature(1): Environment temperature is too high. cardHighTemperature(2):Card self temperature is too high. chipHighTemperature(3):Card's chip temperature is too high. emergencyPowerSaving(4):Emergency power saving action has been taken caused by AC power failure.
| |||||||||||||||||||||
| TzxAnEnvParamTable | 1.3.6.1.4.1.3902.1082.10.10.2.1.5 | NA | |||||||||||||||||||
table · not-accessible · current This table includes environment temperature information. | |||||||||||||||||||||
| RzxAnEnvParamEntry | 1.3.6.1.4.1.3902.1082.10.10.2.1.5.1 | NA | |||||||||||||||||||
| CzxAnEnvRack | 1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current The index of rack. | |||||||||||||||||||||
| CzxAnEnvShelf | 1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.2 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current The index of shelf. | |||||||||||||||||||||
| CzxAnEnvTemp | 1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.3 | Integer32 | RO | 42 | |||||||||||||||||
column · Integer32 · read-only · current The temperature of the environment.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnEnvTempHighAlmThreshold | 1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.4 | Integer32 (45..95) | RW | 65 | |||||||||||||||||
column · Integer32 (45..95) · read-write · current The temperature high alarm threshold of the environment.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnEnvTempCriticalAlmThreshold | 1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.5 | Integer32 | RO | 160 | |||||||||||||||||
column · Integer32 · read-only · current The temperature critical alarm threshold of the environment.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnEnvTempLowAlmThreshold | 1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.6 | Integer32 (-40..0) | RW | -20 | |||||||||||||||||
column · Integer32 (-40..0) · read-write · current The temperature low alarm threshold of the environment.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnEnvShelfPowerConsumption | 1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.7 | Integer32 | RO | 66000 | |||||||||||||||||
column · Integer32 · read-only · current Power consumption of the shelf. Value 0 means not available.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnEnvShelfVoltage | 1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.8 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current Voltage of the shelf. Value 0 means not available.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnEnvShelfCurrent | 1.3.6.1.4.1.3902.1082.10.10.2.1.5.1.9 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current Current of the shelf. Value 0 means not available.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TzxAnCardEnvParamTable | 1.3.6.1.4.1.3902.1082.10.10.2.1.6 | NA | |||||||||||||||||||
table · not-accessible · current This table includes card temperature information. | |||||||||||||||||||||
| RzxAnCardEnvParamEntry | 1.3.6.1.4.1.3902.1082.10.10.2.1.6.1 | NA | |||||||||||||||||||
row · not-accessible · current The entry of zxAnCardEnvParamTable.
| |||||||||||||||||||||
| CzxAnEnvSlot | 1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current The index of slot, the range is [0,20] of 19-inch shelf and [0,22] of 21-inch shelf. | |||||||||||||||||||||
| CzxAnCardTemp | 1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.2 | Integer32 | RO | 38 | |||||||||||||||||
column · Integer32 · read-only · current The current temperature of the card environment. NOTE: 1. In current system, only certain cards support temperature-reading, such as SCXL, GTGOD cards. 2. If the card is not configured, we cannot get its temperature. 3. For the configured but not support temperature-reading cards, we use -1000 as an invalid temperature value to note its temperature. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardPowerConsumption | 1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.3 | Integer32 | RO | 26895 | |||||||||||||||||
column · Integer32 · read-only · current Power consumption of the card. Value 0 means not available.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardVoltage | 1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.4 | Integer32 | RO | 50938 | |||||||||||||||||
column · Integer32 · read-only · current Voltage of the card. Value 0 means not available.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardCurrent | 1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.5 | Integer32 | RO | 528 | |||||||||||||||||
column · Integer32 · read-only · current Current of the card. Value 0 means not available.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardCriticalTempAlmThreshold | 1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.6 | Integer32 | AN | ||||||||||||||||||
column · Integer32 · accessible-for-notify · current The critical temperature alarm threshold of the card.
| |||||||||||||||||||||
| CzxAnCardOptHighestTemp | 1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.7 | Integer32 | AN | 0 | |||||||||||||||||
column · Integer32 · accessible-for-notify · current The highest temperature of the optical modules in the card.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardOptCriticalTempAlmThresh | 1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.8 | Integer32 | AN | ||||||||||||||||||
column · Integer32 · accessible-for-notify · current The critical optical temperature alarm threshold.
| |||||||||||||||||||||
| CzxAnCardOptHighestTempPortNo | 1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.9 | Integer32 | AN | ||||||||||||||||||
column · Integer32 · accessible-for-notify · current The port No. which the optical module is located at, and the optical module has the highest temperature. | |||||||||||||||||||||
| CzxAnCardHeatRadiationAlmThresh | 1.3.6.1.4.1.3902.1082.10.10.2.1.6.1.10 | Integer32 | AN | ||||||||||||||||||
column · Integer32 · accessible-for-notify · current The heat radiation abnormal alarm threshold of the card.
| |||||||||||||||||||||
| TzxAnCardEnvHis15MinPerfTable | 1.3.6.1.4.1.3902.1082.10.10.2.1.7 | NA | |||||||||||||||||||
table · not-accessible · current The 15 minutes interval performance data table of card temperature. | |||||||||||||||||||||
| RzxAnCardEnvHis15MinPerfEntry | 1.3.6.1.4.1.3902.1082.10.10.2.1.7.1 | NA | |||||||||||||||||||
row · not-accessible · current The 15 minutes interval performance data entry of card temperature. | |||||||||||||||||||||
| CzxAnCardEnvHis15MinIntervalNo | 1.3.6.1.4.1.3902.1082.10.10.2.1.7.1.1 | Integer32 (1..96) | NA | ||||||||||||||||||
column · Integer32 (1..96) · not-accessible · current Performance data interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional. | |||||||||||||||||||||
| CzxAnCardEnvHis15MinDateTime | 1.3.6.1.4.1.3902.1082.10.10.2.1.7.1.2 | DateAndTime | RO | ||||||||||||||||||
column · DateAndTime · read-only · current The 15 minutes interval performance data generation time. | |||||||||||||||||||||
| CzxAnCardEnvHis15MinTemp | 1.3.6.1.4.1.3902.1082.10.10.2.1.7.1.3 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The 15 minutes interval average temperature of card. | |||||||||||||||||||||
| TzxAnCardEnvHis1DayPerfTable | 1.3.6.1.4.1.3902.1082.10.10.2.1.8 | NA | |||||||||||||||||||
table · not-accessible · current The 1 day interval performance data table of card temperature. | |||||||||||||||||||||
| RzxAnCardEnvHis1DayPerfEntry | 1.3.6.1.4.1.3902.1082.10.10.2.1.8.1 | NA | |||||||||||||||||||
row · not-accessible · current The 1 day interval performance data entry of card temperature. | |||||||||||||||||||||
| CzxAnCardEnvHis1DayIntervalNo | 1.3.6.1.4.1.3902.1082.10.10.2.1.8.1.1 | Integer32 (1..7) | NA | ||||||||||||||||||
column · Integer32 (1..7) · not-accessible · current Performance data interval number 1 is the the most recent previous interval; interval 7 is 1 week ago. Intervals 2..7 are optional. | |||||||||||||||||||||
| CzxAnCardEnvHis1DayDateTime | 1.3.6.1.4.1.3902.1082.10.10.2.1.8.1.2 | DateAndTime | RO | ||||||||||||||||||
column · DateAndTime · read-only · current The 1 day interval performance data generation time. | |||||||||||||||||||||
| CzxAnCardEnvHis1DayTemp | 1.3.6.1.4.1.3902.1082.10.10.2.1.8.1.3 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The 1 day interval average temperature of card. | |||||||||||||||||||||
| TzxAnCardEnvAlmProfileConfTable | 1.3.6.1.4.1.3902.1082.10.10.2.1.9 | NA | |||||||||||||||||||
table · not-accessible · current The performance alarm threshold profile items configuration table of card temperature. | |||||||||||||||||||||
| RzxAnCardEnvAlmProfileConfEntry | 1.3.6.1.4.1.3902.1082.10.10.2.1.9.1 | NA | |||||||||||||||||||
row · not-accessible · current The performance alarm threshold profile items configuration entry of card temperature. | |||||||||||||||||||||
| CzxAnCardEnvAlmProfileName | 1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.1 | DisplayString (SIZE (1..32)) | NA | ||||||||||||||||||
column · DisplayString (SIZE (1..32)) · not-accessible · current The performance alarm threshold profile name. | |||||||||||||||||||||
| CzxAnCardEnvPerfVariable | 1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.2 | OBJECT IDENTIFIER | NA | ||||||||||||||||||
column · OBJECT IDENTIFIER · not-accessible · current The object identifier of performance variables. | |||||||||||||||||||||
| CzxAnCardEnvRiseAlmThresh | 1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.3 | HCPerfCurrentCount | RC | ||||||||||||||||||
column · HCPerfCurrentCount · read-create · current The threshold for rising alarm. | |||||||||||||||||||||
| CzxAnCardEnvClrRiseAlmThresh | 1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.4 | HCPerfCurrentCount | RC | ||||||||||||||||||
column · HCPerfCurrentCount · read-create · current The threshold for rising alarm restore. | |||||||||||||||||||||
| CzxAnCardEnvRiseWarnThresh | 1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.5 | HCPerfCurrentCount | RC | ||||||||||||||||||
column · HCPerfCurrentCount · read-create · current The threshold for rising warning. | |||||||||||||||||||||
| CzxAnCardEnvClrRiseWarnThresh | 1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.6 | HCPerfCurrentCount | RC | ||||||||||||||||||
column · HCPerfCurrentCount · read-create · current The threshold for rising warning restore. | |||||||||||||||||||||
| CzxAnCardEnvFallWarnThresh | 1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.7 | HCPerfCurrentCount | RC | ||||||||||||||||||
column · HCPerfCurrentCount · read-create · current The threshold for falling warning. | |||||||||||||||||||||
| CzxAnCardEnvClrFallWarnThresh | 1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.8 | HCPerfCurrentCount | RC | ||||||||||||||||||
column · HCPerfCurrentCount · read-create · current The threshold for falling warning restore. | |||||||||||||||||||||
| CzxAnCardEnvFallAlmThresh | 1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.9 | HCPerfCurrentCount | RC | ||||||||||||||||||
column · HCPerfCurrentCount · read-create · current The threshold for falling alarm. | |||||||||||||||||||||
| CzxAnCardEnvClrFallAlmThresh | 1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.10 | HCPerfCurrentCount | RC | ||||||||||||||||||
column · HCPerfCurrentCount · read-create · current The threshold for falling alarm restore. | |||||||||||||||||||||
| CzxAnCardEnvAlmPrfConfRowStatus | 1.3.6.1.4.1.3902.1082.10.10.2.1.9.1.50 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). | |||||||||||||||||||||
| TzxAnCardEnvAlmProfileApplyTable | 1.3.6.1.4.1.3902.1082.10.10.2.1.10 | NA | |||||||||||||||||||
table · not-accessible · current The performance alarm threshold profile application table of card temperature. | |||||||||||||||||||||
| RzxAnCardEnvAlmProfileApplyEntry | 1.3.6.1.4.1.3902.1082.10.10.2.1.10.1 | NA | |||||||||||||||||||
row · not-accessible · current The performance alarm threshold profile application entry of card temperature.
| |||||||||||||||||||||
| CzxAnCardEnvAlmPrf | 1.3.6.1.4.1.3902.1082.10.10.2.1.10.1.1 | DisplayString (SIZE (1..32)) | RC | ||||||||||||||||||
column · DisplayString (SIZE (1..32)) · read-create · current The performance alarm threshold profile. | |||||||||||||||||||||
| CzxAnCardEnvAlmPrfApplyRowStatus | 1.3.6.1.4.1.3902.1082.10.10.2.1.10.1.50 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). | |||||||||||||||||||||
| TzxAnCardEnvAlmProfileTable | 1.3.6.1.4.1.3902.1082.10.10.2.1.11 | NA | |||||||||||||||||||
table · not-accessible · current The performance alarm threshold profile table of card temperature. | |||||||||||||||||||||
| RzxAnCardEnvAlmProfileEntry | 1.3.6.1.4.1.3902.1082.10.10.2.1.11.1 | NA | |||||||||||||||||||
row · not-accessible · current The performance alarm threshold profile entry of card temperature. | |||||||||||||||||||||
| CzxAnCardEnvAlmPrfRowStatus | 1.3.6.1.4.1.3902.1082.10.10.2.1.11.1.50 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). | |||||||||||||||||||||
| TzxAnEnvOverheatProtectTable | 1.3.6.1.4.1.3902.1082.10.10.2.1.13 | NA | |||||||||||||||||||
table · not-accessible · current Environment overheat protection table. | |||||||||||||||||||||
| RzxAnEnvOverheatProtectEntry | 1.3.6.1.4.1.3902.1082.10.10.2.1.13.1 | NA | |||||||||||||||||||
row · not-accessible · current Environment overheat protection entry. To modify zxAnEnvOverheatProtectEnable from disabled to enabled, zxAnEnvOverheatProtectEnable is mandatory, zxAnEnvOverheatProtectDelay is optional. To modify zxAnEnvOverheatProtectEnable from enabled to disabled, only zxAnEnvOverheatProtectEnable is mandatory.
| |||||||||||||||||||||
| CzxAnEnvOverheatProtectEnable | 1.3.6.1.4.1.3902.1082.10.10.2.1.13.1.1 | INTEGER | RW | disabled(2) | |||||||||||||||||
column · INTEGER · read-write · current Enables or disables the environment overheat protection function.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnEnvOverheatProtectDelay | 1.3.6.1.4.1.3902.1082.10.10.2.1.13.1.2 | Integer32 (1..60) | RW | 10 | |||||||||||||||||
column · Integer32 (1..60) · read-write · current The delaying time between two steps. For example, when temperature is higher than the threshold, takes an action as the step 1, and delays the value of zxAnEnvOverheatProtectDelay, if the temperature is still higher than the threshold, takes an action as step 2.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnEnvOverheatProtectFirstStep | 1.3.6.1.4.1.3902.1082.10.10.2.1.13.1.3 | ZxAnEnvShutdownServiceType | RW | \xe0\x00\x00\x00 | |||||||||||||||||
column · ZxAnEnvShutdownServiceType · read-write · current The first step when the environment temperature exceeds zxAnEnvTempHighAlmThreshold. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnEnvOverheatProtectSecondStep | 1.3.6.1.4.1.3902.1082.10.10.2.1.13.1.4 | ZxAnEnvShutdownServiceType | RW | \x10\x00\x00\x00 | |||||||||||||||||
column · ZxAnEnvShutdownServiceType · read-write · current The second step when the environment temperature still exceeds zxAnEnvTempHighAlmThreshold after first step has been done. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TzxAnEnvCardOverheatProtectTable | 1.3.6.1.4.1.3902.1082.10.10.2.1.14 | NA | |||||||||||||||||||
table · not-accessible · current Card overheat protection table. | |||||||||||||||||||||
| RzxAnEnvCardOverheatProtectEntry | 1.3.6.1.4.1.3902.1082.10.10.2.1.14.1 | NA | |||||||||||||||||||
| CzxAnEnvCardCriticalTempProtectEn | 1.3.6.1.4.1.3902.1082.10.10.2.1.14.1.1 | INTEGER | RW | disabled(2) | |||||||||||||||||
column · INTEGER · read-write · current Enables or disables the card critical temperature protection function. If it is enabled, the card will be stopped when the card temperature is higher than the card critical temperature.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NzxAnEnvMonInterfaceObjects | 1.3.6.1.4.1.3902.1082.10.10.2.2 | ||||||||||||||||||||
| TzxAnEnvMonInterfaceTable | 1.3.6.1.4.1.3902.1082.10.10.2.2.5 | NA | |||||||||||||||||||
table · not-accessible · current This table includes the environment interface information. | |||||||||||||||||||||
| RzxAnEnvMonInterfaceEntry | 1.3.6.1.4.1.3902.1082.10.10.2.2.5.1 | NA | |||||||||||||||||||
| CzxAnEnvMonInterfaceUsage | 1.3.6.1.4.1.3902.1082.10.10.2.2.5.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The equipment type connected to the environment monitor interface.
| |||||||||||||||||||||
| CzxAnEnvEpmConnectPort | 1.3.6.1.4.1.3902.1082.10.10.2.2.5.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The port no which epm connect
| |||||||||||||||||||||
| CzxAnEnvBackplaneInterfaceUsage | 1.3.6.1.4.1.3902.1082.10.10.2.2.5.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The equipment type connected to the Backplane Interface. fan(1): the fan connect to the Backplane Interface; noUse(3): not used; noSupport(255):not support.
| |||||||||||||||||||||
| NzxAnEnvPowerSupplyObjects | 1.3.6.1.4.1.3902.1082.10.10.2.3 | ||||||||||||||||||||
| NzxAnPowerSupplyGlobalObjects | 1.3.6.1.4.1.3902.1082.10.10.2.3.1 | ||||||||||||||||||||
| SzxAnEnvEmergencyPowerSaveEnable | 1.3.6.1.4.1.3902.1082.10.10.2.3.1.1 | INTEGER | RW | disabled(2) | |||||||||||||||||
scalar · INTEGER · read-write · current Enables or disables the emergency power saving.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SzxAnEnvEmergencyPowerSaveDelay | 1.3.6.1.4.1.3902.1082.10.10.2.3.1.2 | Integer32 (0..1440) | RW | 60 | |||||||||||||||||
scalar · Integer32 (0..1440) · read-write · current If AC power failure lasts more than zxAnEnvEmergencyPowerSaveDelay, emergency power saving action will be taken.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SzxAnEnvEmergencyPowerSaveRecover | 1.3.6.1.4.1.3902.1082.10.10.2.3.1.3 | Integer32 (0..1440) | RW | 5 | |||||||||||||||||
scalar · Integer32 (0..1440) · read-write · current If AC power recovered, after this delay, the emergency power save action will be cancelled.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SzxAnEnvEmergencyPowerSaveSvcType | 1.3.6.1.4.1.3902.1082.10.10.2.3.1.4 | ZxAnEnvShutdownServiceType | RW | \xe0\x00\x00\x00 | |||||||||||||||||
scalar · ZxAnEnvShutdownServiceType · read-write · current The service types will be shut down in emergency power saving action. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SzxAnEnvPowerMode | 1.3.6.1.4.1.3902.1082.10.10.2.3.1.5 | INTEGER | RW | normal(1) | |||||||||||||||||
scalar · INTEGER · read-write · current The current power supply mode of the equipment, emergency power saving action is on the basis of the power mode zxAnEnvPowerMode. normal(1) means using AC power as power supply. battery(2) means using storage battery as power supply.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SzxAnEnvEmergencyBatteryVoltage | 1.3.6.1.4.1.3902.1082.10.10.2.3.1.6 | Integer32 | RO | 0 | |||||||||||||||||
scalar · Integer32 · read-only · current The current voltage of the battery.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SzxAnEnvEmergencyBatteryThreshold | 1.3.6.1.4.1.3902.1082.10.10.2.3.1.7 | Integer32 (45000..53000) | RW | 48000 | |||||||||||||||||
scalar · Integer32 (45000..53000) · read-write · current The threshold of the battery voltage. If the battery voltage is less than zxAnEnvEmergencyBatteryThreshold, the emergency power saving action will be taken.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TzxAnPowerSupplyCapabilityTable | 1.3.6.1.4.1.3902.1082.10.10.2.3.10 | NA | |||||||||||||||||||
table · not-accessible · current This table includes power supply capability table. | |||||||||||||||||||||
| RzxAnPowerSupplyCapabilityEntry | 1.3.6.1.4.1.3902.1082.10.10.2.3.10.1 | NA | |||||||||||||||||||
row · not-accessible · current The entry of zxAnPowerSupplyCapabilityTable.
| |||||||||||||||||||||
| CzxAnPowerSupplyMaxPowerNum | 1.3.6.1.4.1.3902.1082.10.10.2.3.10.1.1 | Integer32 | RO | 2 | |||||||||||||||||
column · Integer32 · read-only · current The max number of power supply in the equipment. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TzxAnPowerSupplyTable | 1.3.6.1.4.1.3902.1082.10.10.2.3.11 | NA | |||||||||||||||||||
table · not-accessible · current This table includes power supply table. | |||||||||||||||||||||
| RzxAnPowerSupplyEntry | 1.3.6.1.4.1.3902.1082.10.10.2.3.11.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in zxAnPowerSupplyTable.
| |||||||||||||||||||||
| CzxAnPowerSupplyOperStatus | 1.3.6.1.4.1.3902.1082.10.10.2.3.11.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational status of the power supply module.
| |||||||||||||||||||||
| CzxAnPowerSupplyInVoltage | 1.3.6.1.4.1.3902.1082.10.10.2.3.11.1.2 | Integer32 | RO | 59 | |||||||||||||||||
column · Integer32 · read-only · current The actual input volts of the power supply module.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnPowerSupplyInVoltageStatus | 1.3.6.1.4.1.3902.1082.10.10.2.3.11.1.3 | INTEGER | RO | overVoltage(2) | |||||||||||||||||
column · INTEGER · read-only · current The volt status of the power supply. normal(1) -- The input power is normal. overVoltage(2) -- The input power is over voltage. underVoltage(3) -- The input power is under voltage. off(4)) -- No power input.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnPowerInVoltageUpperThresh | 1.3.6.1.4.1.3902.1082.10.10.2.3.11.1.4 | Integer32 | RW | 0 | |||||||||||||||||
column · Integer32 · read-write · current The upper threshold of input volts.The alarm should be generated
when zxAnPowerSupplyInVoltage exceeds this threshold.
If it is 0, no alarm reported to manager.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnPowerInVoltageLowerThresh | 1.3.6.1.4.1.3902.1082.10.10.2.3.11.1.5 | Integer32 | RW | 0 | |||||||||||||||||
column · Integer32 · read-write · current The lower threshold of input volts.The alarm should be generated
when zxAnPowerSupplyInVoltage is lower than this threshold.
If it is 0, no alarm reported to manager.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnPowerSupplyInCurrent | 1.3.6.1.4.1.3902.1082.10.10.2.3.11.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The actual current of the power supply module.
| |||||||||||||||||||||
| CzxAnPowerInCurrentThresh | 1.3.6.1.4.1.3902.1082.10.10.2.3.11.1.7 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The upper threshold of input current.The alarm should be generated
when zxAnPowerSupplyInCurrent exceeds this threshold.
If it is 0, no alarm reported to manager.
| |||||||||||||||||||||
| NzxAnEnvFanObjects | 1.3.6.1.4.1.3902.1082.10.10.2.4 | ||||||||||||||||||||
| TzxAnEnvFanTrayTable | 1.3.6.1.4.1.3902.1082.10.10.2.4.10 | NA | |||||||||||||||||||
table · not-accessible · current The Fan Tray Control table, with rack and shelf information. | |||||||||||||||||||||
| RzxAnEnvFanTrayEntry | 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1 | NA | |||||||||||||||||||
| CzxAnFanTrayAlarmBeepEnable | 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The control status of the fan alarm beep.
| |||||||||||||||||||||
| CzxAnFanTrayAutoSwitchByCardUp | 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable/disable fan auto switch with card installation. If it is enabled, the fan under the card should be switched to running status when the card is installed. Otherwise, the fan should be shutdown.
| |||||||||||||||||||||
| CzxAnFanTrayHardwareVersion | 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.3 | DisplayString | RO | No support | |||||||||||||||||
column · DisplayString · read-only · current The hardware version of the fan tray Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnFanTraySoftwareVersion | 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.4 | DisplayString | RO | | |||||||||||||||||
column · DisplayString · read-only · current The software version of the fan tray Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnFanTraySpeedCtrlMode | 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.5 | INTEGER | RW | temperatureBasedAutoCtrl(1) | |||||||||||||||||
column · INTEGER · read-write · current The speed control mode of the fan. When this value is fixSpeed,zxAnFanTrayAdminStatus, zxAnFanTrayConfSpeedLevel,zxAnEnvFanAdminStatus and zxAnEnvFanConfSpeedLevel can be configured.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnFanTrayLowSpeed | 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.6 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The speed value of the fan's low speed level. The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700, 4000,4400. NOTE: Different equipment maybe has different default value.
| |||||||||||||||||||||
| CzxAnFanTrayStdSpeed | 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.7 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The speed value of the fan's standard speed level. The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700, 4000,4400. NOTE: Different equipment maybe has different default value.
| |||||||||||||||||||||
| CzxAnFanTrayHighSpeed | 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.8 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The speed value of the fan's high speed level. The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700, 4000,4400. NOTE: Different equipment maybe has different default value.
| |||||||||||||||||||||
| CzxAnFanTraySuperSpeed | 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.9 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The speed value of the fan's super speed level. The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700, 4000,4400. NOTE: Different equipment maybe has different default value.
| |||||||||||||||||||||
| CzxAnFanTrayLowSpeedShiftTemp | 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.10 | Integer32 (0..55) | RW | 20 | |||||||||||||||||
column · Integer32 (0..55) · read-write · current The temperature to activate the fan tray to shift to the low speed level.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnFanTrayStdSpeedShiftTemp | 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.11 | Integer32 (5..60) | RW | 36 | |||||||||||||||||
column · Integer32 (5..60) · read-write · current The temperature to activate the fan tray to shift to the standard speed level.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnFanTrayHighSpeedShiftTemp | 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.12 | Integer32 (10..65) | RW | 44 | |||||||||||||||||
column · Integer32 (10..65) · read-write · current The temperature to activate the fan tray to shift to the high speed level.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnFanTraySuperSpeedShiftTemp | 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.13 | Integer32 (15..70) | RW | 51 | |||||||||||||||||
column · Integer32 (15..70) · read-write · current The temperature to activate the fan tray to shift to the super speed level.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnFanTrayLowSpeedPercent | 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.14 | INTEGER (10..97) | RW | 20 | |||||||||||||||||
column · INTEGER (10..97) · read-write · current The percentage of speed of the low speed level.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnFanTrayStdSpeedPercent | 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.15 | INTEGER (11..98) | RW | 35 | |||||||||||||||||
column · INTEGER (11..98) · read-write · current The percentage of speed of the standard speed level.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnFanTrayHighSpeedPercent | 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.16 | INTEGER (12..99) | RW | 50 | |||||||||||||||||
column · INTEGER (12..99) · read-write · current The percentage of speed of the high speed level.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnFanTraySuperSpeedPercent | 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.17 | INTEGER (13..100) | RW | 75 | |||||||||||||||||
column · INTEGER (13..100) · read-write · current The percentage of speed of the super speed level.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnFanTrayAdminStatus | 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.18 | INTEGER | RW | up(1) | |||||||||||||||||
column · INTEGER · read-write · current The administrative status of the fan tray. When zxAnFanTrayAdminStatus is configured, all the zxAnEnvFanAdminStatus values are consistent with zxAnFanTrayAdminStatus.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnFanTrayConfSpeedLevel | 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.19 | INTEGER | RW | standardSpeed(2) | |||||||||||||||||
column · INTEGER · read-write · current The configured speed level of the fan tray. When zxAnFanTrayConfSpeedLevel is configured, all the zxAnEnvFanConfSpeedLevel values are consistent with zxAnFanTrayConfSpeedLevel. This variable is valid if zxAnFanTrayAdminStatus is up.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnFanTrayPowerConsumption | 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.20 | Integer32 | RO | 5210 | |||||||||||||||||
column · Integer32 · read-only · current Power consumption of the fan tray. Value 0 means not available.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnFanTraySn | 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.21 | DisplayString (SIZE (0..12)) | RW | \xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff | |||||||||||||||||
column · DisplayString (SIZE (0..12)) · read-write · current The serial number of fan tray. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnFanTrayVoltage | 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.22 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current Voltage of the fan tray. Value 0 means not available.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnFanTrayCurrent | 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.23 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current Current of the fan tray. Value 0 means not available.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnFanTrayTemp | 1.3.6.1.4.1.3902.1082.10.10.2.4.10.1.24 | Integer32 | RO | -1000 | |||||||||||||||||
column · Integer32 · read-only · current The temperature of the fan tray.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TzxAnEnvFanTable | 1.3.6.1.4.1.3902.1082.10.10.2.4.11 | NA | |||||||||||||||||||
table · not-accessible · current This table includes speed information and operational status of the fan units. | |||||||||||||||||||||
| RzxAnEnvFanEntry | 1.3.6.1.4.1.3902.1082.10.10.2.4.11.1 | NA | |||||||||||||||||||
row · not-accessible · current The entry of zxAnEnvFanTable. | |||||||||||||||||||||
| CzxAnEnvFanIndex | 1.3.6.1.4.1.3902.1082.10.10.2.4.11.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current The index of this fan unit. For 19-inch shelf, there are 3 fans in each fan tray. The fan index should be integer in [1,3]. For 21-inch shelf, there are 4 fans. The fan index should be integer in [1,4]. | |||||||||||||||||||||
| CzxAnEnvFanConfSpeedLevel | 1.3.6.1.4.1.3902.1082.10.10.2.4.11.1.2 | INTEGER | RW | highSpeed(3) | |||||||||||||||||
column · INTEGER · read-write · current The configured speed level of the fan unit singly.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnEnvFanActualSpeedLevel | 1.3.6.1.4.1.3902.1082.10.10.2.4.11.1.3 | INTEGER | RO | highSpeed(3) | |||||||||||||||||
column · INTEGER · read-only · current The actual speed level of the fan unit.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnEnvFanAdminStatus | 1.3.6.1.4.1.3902.1082.10.10.2.4.11.1.4 | INTEGER | RW | up(1) | |||||||||||||||||
column · INTEGER · read-write · current The administrative status of the fan unit singly.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnEnvFanOperStatus | 1.3.6.1.4.1.3902.1082.10.10.2.4.11.1.5 | INTEGER | RO | up(1) | |||||||||||||||||
column · INTEGER · read-only · current The operational status of the fan unit.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnEnvFanOnlineStatus | 1.3.6.1.4.1.3902.1082.10.10.2.4.11.1.6 | INTEGER | RO | online(1) | |||||||||||||||||
column · INTEGER · read-only · current The actual online status of the fan unit.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnEnvFanActualSpeed | 1.3.6.1.4.1.3902.1082.10.10.2.4.11.1.7 | Integer32 | RO | 3240 | |||||||||||||||||
column · Integer32 · read-only · current The actual speed of the fan unit. NOTE: If not supported, NMS should use the speed value of zxAnEnvFanActualSpeedLevel. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NzxAnEnvFanTrayResetObjects | 1.3.6.1.4.1.3902.1082.10.10.2.4.12 | ||||||||||||||||||||
| SzxAnEnvFanTrayResetRack | 1.3.6.1.4.1.3902.1082.10.10.2.4.12.1 | Integer32 | RW | 0 | |||||||||||||||||
scalar · Integer32 · read-write · current The rack number of the fan tray. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SzxAnEnvFanTrayResetShelfList | 1.3.6.1.4.1.3902.1082.10.10.2.4.12.2 | DisplayString (SIZE (0..16)) | RW | | |||||||||||||||||
scalar · DisplayString (SIZE (0..16)) · read-write · current The shelf number list of the fan tray. They can be reset in batch, for example: 1,2,3. Setting this object to empty means all the fan trays connected with zxAnEnvFanTrayRack will be reset. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SzxAnEnvFanTrayResetAction | 1.3.6.1.4.1.3902.1082.10.10.2.4.12.3 | INTEGER | RW | reset(1) | |||||||||||||||||
scalar · INTEGER · read-write · current Reset the fan trays. To query this object, always return 1.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NzxAnEnvDeviceObjects | 1.3.6.1.4.1.3902.1082.10.10.2.5 | ||||||||||||||||||||
| TzxAnEnvDeviceTable | 1.3.6.1.4.1.3902.1082.10.10.2.5.2 | NA | |||||||||||||||||||
table · not-accessible · current The table of environment device. | |||||||||||||||||||||
| RzxAnEnvDeviceEntry | 1.3.6.1.4.1.3902.1082.10.10.2.5.2.1 | NA | |||||||||||||||||||
| CzxAnEnvDeviceId | 1.3.6.1.4.1.3902.1082.10.10.2.5.2.1.1 | Integer32 (1..100) | NA | ||||||||||||||||||
column · Integer32 (1..100) · not-accessible · current The ID of this environment device. Value 1-50 is default value which can not be modified or deleted. If add a new device, the ID will be starting from 51. | |||||||||||||||||||||
| CzxAnEnvDeviceName | 1.3.6.1.4.1.3902.1082.10.10.2.5.2.1.2 | DisplayString (SIZE (1..32)) | RC | 2nd-Power-Monitor | |||||||||||||||||
column · DisplayString (SIZE (1..32)) · read-create · current The name of the environment device. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnEnvDeviceRowStatus | 1.3.6.1.4.1.3902.1082.10.10.2.5.2.1.50 | RowStatus | RC | 1 | |||||||||||||||||
column · RowStatus · read-create · current The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1). Example values from LibreNMS test devices
| |||||||||||||||||||||
| TzxAnEnvDevMonSwitchTable | 1.3.6.1.4.1.3902.1082.10.10.2.5.3 | NA | |||||||||||||||||||
table · not-accessible · current The table of the switch which monitors environment device. | |||||||||||||||||||||
| RzxAnEnvDevMonSwitchEntry | 1.3.6.1.4.1.3902.1082.10.10.2.5.3.1 | NA | |||||||||||||||||||
| CzxAnEnvDevMonSwitchId | 1.3.6.1.4.1.3902.1082.10.10.2.5.3.1.1 | Integer32 (1..8) | NA | ||||||||||||||||||
column · Integer32 (1..8) · not-accessible · current The ID of the switch. | |||||||||||||||||||||
| CzxAnEnvDevMonSwitchDeviceId | 1.3.6.1.4.1.3902.1082.10.10.2.5.3.1.2 | Integer32 (0..100) | RW | 0 | |||||||||||||||||
column · Integer32 (0..100) · read-write · current The ID of the device which monitored by the switch. Value 0 means this switch does not monitor any device. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnEnvDevMonSwitchTrapEnable | 1.3.6.1.4.1.3902.1082.10.10.2.5.3.1.3 | INTEGER | RW | disabled(2) | |||||||||||||||||
column · INTEGER · read-write · current Enables or disables the environment device abnormal trap.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnEnvDevMonSwitchNormalStatus | 1.3.6.1.4.1.3902.1082.10.10.2.5.3.1.4 | INTEGER | RW | lowLevel(1) | |||||||||||||||||
column · INTEGER · read-write · current The normal status of the environment device.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnEnvDevMonSwitchCurrStatus | 1.3.6.1.4.1.3902.1082.10.10.2.5.3.1.5 | INTEGER | RO | unknown(255) | |||||||||||||||||
column · INTEGER · read-only · current The current status of the environment device.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NzxAnEnvMonNotifications | 1.3.6.1.4.1.3902.1082.10.10.3 | ||||||||||||||||||||
| NzxAnEnvMonTempTraps | 1.3.6.1.4.1.3902.1082.10.10.3.1 | ||||||||||||||||||||
| !zxAnEnvHighTempAlm | 1.3.6.1.4.1.3902.1082.10.10.3.1.1 | ||||||||||||||||||||
notification · current The environment temperature has exceeded high temperature threshold zxAnEnvTempHighAlmThreshold. The zxAnEnvTemp object identifies the current temperature. | |||||||||||||||||||||
| !zxAnEnvHighTempClr | 1.3.6.1.4.1.3902.1082.10.10.3.1.2 | ||||||||||||||||||||
notification · current The environment temperature has returned to normal operating temperature from zxAnEnvTempHighAlmThreshold. The zxAnEnvTemp object identifies the current temperature. | |||||||||||||||||||||
| !zxAnEnvTempSensorFailure | 1.3.6.1.4.1.3902.1082.10.10.3.1.5 | ||||||||||||||||||||
notification · current It indicates that the temperature sensor is in fault. | |||||||||||||||||||||
| !zxAnEnvCriticalTempAlm | 1.3.6.1.4.1.3902.1082.10.10.3.1.6 | ||||||||||||||||||||
notification · current The environment temperature has exceeded critical temperature threshold zxAnEnvTempCriticalAlmThreshold. The zxAnEnvTemp object identifies the current temperature. | |||||||||||||||||||||
| !zxAnEnvCriticalTempClr | 1.3.6.1.4.1.3902.1082.10.10.3.1.7 | ||||||||||||||||||||
notification · current The environment temperature has returned to normal operating temperature from zxAnEnvTempCriticalAlmThreshold. The zxAnEnvTemp object identifies the current temperature. | |||||||||||||||||||||
| !zxAnEnvLowTempAlm | 1.3.6.1.4.1.3902.1082.10.10.3.1.8 | ||||||||||||||||||||
notification · current The environment temperature is below low temperature threshold zxAnEnvTempLowAlmThreshold. The zxAnEnvTemp object identifies the current temperature. | |||||||||||||||||||||
| !zxAnEnvLowTempClr | 1.3.6.1.4.1.3902.1082.10.10.3.1.9 | ||||||||||||||||||||
notification · current The environment temperature has returned to normal operating temperature from zxAnEnvTempLowAlmThreshold. The zxAnEnvTemp object identifies the current temperature. | |||||||||||||||||||||
| !zxAnEnvCardShutdownAlm | 1.3.6.1.4.1.3902.1082.10.10.3.1.30 | ||||||||||||||||||||
notification · current A zxAnEnvCardShutdownAlm trap is sent when the card has been shut down because agent has detected that the temperature is too high or the AC power is failure and the battery voltage is lower than zxAnEnvEmergencyBatteryThreshold. zxAnEnvCardShutdownReason indicates the real reason. When zxAnEnvCardShutdownReason is envHighTemperature ( 1 ), it means the environment temperature is too high, zxAnEnvTemp is the value of current environment temperature, zxAnCardTemp is invalid and should be zero. zxAnEnvEmergencyBatteryVoltage and zxAnEnvEmergencyBatteryThreshold are invalid and should be zero. When zxAnEnvCardShutdownReason is cardHighTemperature ( 2 ), it means the card temperature is too high, zxAnCardTemp is the value of current card temperature, zxAnEnvTemp is invalid and should be zero. zxAnEnvEmergencyBatteryVoltage and zxAnEnvEmergencyBatteryThreshold are invalid and should be zero. When zxAnEnvCardShutdownReason is chipHighTemperature ( 3 ), it means the temperature of the chip on the card is too high, zxAnCardTemp and zxAnEnvTemp are invalid and should be zero. zxAnEnvEmergencyBatteryVoltage and zxAnEnvEmergencyBatteryThreshold are invalid and should be zero. When zxAnEnvCardShutdownReason is emergencyPowerSaving ( 4 ), it means the AC power is failure, the emergency power saving action has been taken, zxAnCardTemp and zxAnEnvTemp are invalid and should be zero. zxAnEnvEmergencyBatteryVoltage is the value of the current battery voltage, zxAnEnvEmergencyBatteryThreshold is the threshold of the battery voltage. | |||||||||||||||||||||
| !zxAnEnvCardShutdownClr | 1.3.6.1.4.1.3902.1082.10.10.3.1.31 | ||||||||||||||||||||
notification · current A zxAnEnvCardShutdownClr trap is sent when the card temperature becomes normal, or the environment temperature becomes normal, or the chip temperature becomes normal, or the battery voltage is higher than zxAnEnvEmergencyBatteryThreshold or AC power becomes normal. | |||||||||||||||||||||
| !zxAnEnvTemperatureAbnormalAlm | 1.3.6.1.4.1.3902.1082.10.10.3.1.32 | ||||||||||||||||||||
notification · current In temperature control mode, a zxAnEnvTemperatureAbnormalAlm trap is sent when the environment temperature can't be read. | |||||||||||||||||||||
| !zxAnEnvTemperatureAbnormalClr | 1.3.6.1.4.1.3902.1082.10.10.3.1.33 | ||||||||||||||||||||
notification · current A zxAnEnvTemperatureAbnormalClr trap is sent when the zxAnEnvTemperatureAbnormalAlm is cleared. | |||||||||||||||||||||
| !zxAnEnvNearCriticalTempAlm | 1.3.6.1.4.1.3902.1082.10.10.3.1.34 | ||||||||||||||||||||
notification · current A zxAnEnvNearCriticalTempAlm trap is sent when the environment temperature is close to the environment critical temperature alarm threshold. | |||||||||||||||||||||
| !zxAnEnvNearCriticalTempClr | 1.3.6.1.4.1.3902.1082.10.10.3.1.35 | ||||||||||||||||||||
notification · current A zxAnEnvNearCriticalTempClr trap is sent when the zxAnEnvNearCriticalTempAlm is cleared. | |||||||||||||||||||||
| !zxAnEnvCardNearCriticalTempAlm | 1.3.6.1.4.1.3902.1082.10.10.3.1.36 | ||||||||||||||||||||
notification · current A zxAnEnvCardNearCriticalTempAlm trap is sent when the card temperature is close to the card critical temperature alarm threshold. | |||||||||||||||||||||
| !zxAnEnvCardNearCriticalTempClr | 1.3.6.1.4.1.3902.1082.10.10.3.1.37 | ||||||||||||||||||||
notification · current A zxAnEnvCardNearCriticalTempClr trap is sent when the zxAnEnvCardNearCriticalTempAlm is cleared. | |||||||||||||||||||||
| !zxAnEnvOptNearCriticalTempAlm | 1.3.6.1.4.1.3902.1082.10.10.3.1.38 | ||||||||||||||||||||
notification · current A zxAnEnvOptNearCriticalTempAlm trap is sent when the optical module temperature is close to the optical module critical temperature alarm threshold. | |||||||||||||||||||||
| !zxAnEnvOptNearCriticalTempClr | 1.3.6.1.4.1.3902.1082.10.10.3.1.39 | ||||||||||||||||||||
notification · current A zxAnEnvOptNearCriticalTempClr trap is sent when the zxAnEnvOptNearCriticalTempAlm is cleared. | |||||||||||||||||||||
| !zxAnEnvHeatRadiationAbnormalAlm | 1.3.6.1.4.1.3902.1082.10.10.3.1.40 | ||||||||||||||||||||
notification · current A zxAnEnvHeatRadiationAbnormalAlm trap is sent when the temperature difference between the card and the environment exceeds the zxAnCardHeatRadiationAlmThresh. | |||||||||||||||||||||
| !zxAnEnvHeatRadiationAbnormalClr | 1.3.6.1.4.1.3902.1082.10.10.3.1.41 | ||||||||||||||||||||
notification · current A zxAnEnvHeatRadiationAbnormalClr trap is sent when the zxAnEnvHeatRadiationAbnormalAlm is cleared. | |||||||||||||||||||||
| NzxAnEnvMonInterfaceTraps | 1.3.6.1.4.1.3902.1082.10.10.3.2 | ||||||||||||||||||||
| !zxAnEnvMonitorInterfaceLinkDown | 1.3.6.1.4.1.3902.1082.10.10.3.2.1 | ||||||||||||||||||||
notification · current It indicates that the agent has detected that the link at the environment monitoring interface has been down. | |||||||||||||||||||||
| !zxAnEnvMonitorInterfaceLinkUp | 1.3.6.1.4.1.3902.1082.10.10.3.2.2 | ||||||||||||||||||||
notification · current It indicates that the agent has detected that the link at the environment monitoring interface has been up. | |||||||||||||||||||||
| NzxAnEnvMonPowerSupplyTraps | 1.3.6.1.4.1.3902.1082.10.10.3.3 | ||||||||||||||||||||
| !zxAnEnvPowerSupplyModuleDown | 1.3.6.1.4.1.3902.1082.10.10.3.3.1 | ||||||||||||||||||||
notification · current It indicates that the power supply module is down.
| |||||||||||||||||||||
| !zxAnEnvPowerSupplyModuleUp | 1.3.6.1.4.1.3902.1082.10.10.3.3.2 | ||||||||||||||||||||
notification · current It indicates that the power supply module is up.
| |||||||||||||||||||||
| !zxAnEnvPowerOverVoltageAlm | 1.3.6.1.4.1.3902.1082.10.10.3.3.3 | ||||||||||||||||||||
notification · current It indicates that the input voltage of power supply is over-voltage. | |||||||||||||||||||||
| !zxAnEnvPowerOverVoltageClr | 1.3.6.1.4.1.3902.1082.10.10.3.3.4 | ||||||||||||||||||||
notification · current It indicates that the over-voltage fault is cleared. | |||||||||||||||||||||
| !zxAnEnvPowerUnderVoltageAlm | 1.3.6.1.4.1.3902.1082.10.10.3.3.5 | ||||||||||||||||||||
notification · current It indicates that the input voltage of power supply is under-voltage. | |||||||||||||||||||||
| !zxAnEnvPowerUnderVoltageClr | 1.3.6.1.4.1.3902.1082.10.10.3.3.6 | ||||||||||||||||||||
notification · current It indicates that the under-voltage fault is cleared. | |||||||||||||||||||||
| !zxAnEnvPowerOff | 1.3.6.1.4.1.3902.1082.10.10.3.3.7 | ||||||||||||||||||||
notification · current It indicates that the power supply is off. | |||||||||||||||||||||
| !zxAnEnvPowerOn | 1.3.6.1.4.1.3902.1082.10.10.3.3.8 | ||||||||||||||||||||
notification · current It indicates that the power supply off fault is cleared. | |||||||||||||||||||||
| !zxAnEnvEmergencyPowerSaveAlm | 1.3.6.1.4.1.3902.1082.10.10.3.3.9 | ||||||||||||||||||||
notification · current The current power supply switches to storage battery, the emergency power saving action has been taken. | |||||||||||||||||||||
| !zxAnEnvEmergencyPowerSaveClr | 1.3.6.1.4.1.3902.1082.10.10.3.3.10 | ||||||||||||||||||||
notification · current The current power supply switches to normal AC power. | |||||||||||||||||||||
| !zxAnEnvACPowerDownAlm | 1.3.6.1.4.1.3902.1082.10.10.3.3.11 | ||||||||||||||||||||
notification · current A zxAnEnvACPowerDownAlm trap is sent when the agent detects no AC power input. | |||||||||||||||||||||
| !zxAnEnvACPowerDownClr | 1.3.6.1.4.1.3902.1082.10.10.3.3.12 | ||||||||||||||||||||
notification · current A zxAnEnvACPowerDownClr trap is sent when the agent detects AC power input. | |||||||||||||||||||||
| !zxAnEnvNoBatteryAlm | 1.3.6.1.4.1.3902.1082.10.10.3.3.13 | ||||||||||||||||||||
notification · current A zxAnEnvNoBatteryAlm trap is sent when no battery found by the agent. | |||||||||||||||||||||
| !zxAnEnvNoBatteryClr | 1.3.6.1.4.1.3902.1082.10.10.3.3.14 | ||||||||||||||||||||
notification · current A zxAnEnvNoBatteryClr trap is sent when the battery has been found by the agent. | |||||||||||||||||||||
| !zxAnEnvBatteryUnderVoltageAlm | 1.3.6.1.4.1.3902.1082.10.10.3.3.15 | ||||||||||||||||||||
notification · current A zxAnEnvBatteryUnderVoltageAlm trap is sent when the battery voltage is under-voltage. | |||||||||||||||||||||
| !zxAnEnvBatteryUnderVoltageClr | 1.3.6.1.4.1.3902.1082.10.10.3.3.16 | ||||||||||||||||||||
notification · current A zxAnEnvBatteryUnderVoltageClr trap is sent when the battery voltage becomes normal. | |||||||||||||||||||||
| NzxAnEnvMonFanTraps | 1.3.6.1.4.1.3902.1082.10.10.3.4 | ||||||||||||||||||||
| !zxAnEnvFanLinkDown | 1.3.6.1.4.1.3902.1082.10.10.3.4.1 | ||||||||||||||||||||
notification · current It indicates that the agent has detected that fan is offline.
| |||||||||||||||||||||
| !zxAnEnvFanLinkUp | 1.3.6.1.4.1.3902.1082.10.10.3.4.2 | ||||||||||||||||||||
notification · current It indicates that the agent has detected that fan is online.
| |||||||||||||||||||||
| !zxAnEnvFanTrayLinkDown | 1.3.6.1.4.1.3902.1082.10.10.3.4.3 | ||||||||||||||||||||
notification · current It indicates that the agent has detected that the link at the fan card interface has been down. | |||||||||||||||||||||
| !zxAnEnvFanTrayLinkUp | 1.3.6.1.4.1.3902.1082.10.10.3.4.4 | ||||||||||||||||||||
notification · current It indicates that the agent has detected that the link at the fan card interface has been up. | |||||||||||||||||||||
| !zxAnEnvFanFailureAlm | 1.3.6.1.4.1.3902.1082.10.10.3.4.5 | ||||||||||||||||||||
| !zxAnEnvFanFailureClr | 1.3.6.1.4.1.3902.1082.10.10.3.4.6 | ||||||||||||||||||||
| NzxAnEnvDeviceTraps | 1.3.6.1.4.1.3902.1082.10.10.3.5 | ||||||||||||||||||||
| !zxAnEnvDeviceAbnormalAlm | 1.3.6.1.4.1.3902.1082.10.10.3.5.1 | ||||||||||||||||||||
notification · current A zxAnEnvDeviceAbnormalAlm trap is sent when the current status of environment device is inconsistent with normal status. | |||||||||||||||||||||
| !zxAnEnvDeviceAbnormalClr | 1.3.6.1.4.1.3902.1082.10.10.3.5.2 | ||||||||||||||||||||
notification · current A zxAnEnvDeviceAbnormalClr trap is sent when current status of environment device is consistent with normal status. | |||||||||||||||||||||
| NzxAnEnvMonConformance | 1.3.6.1.4.1.3902.1082.10.10.4 | ||||||||||||||||||||
| NzxAnEnvMonCompliances | 1.3.6.1.4.1.3902.1082.10.10.4.1 | ||||||||||||||||||||
| MzxAnEnvMonCompliance | 1.3.6.1.4.1.3902.1082.10.10.4.1.1 | ||||||||||||||||||||
compliance · current The compliance statement for SNMP entities which implement the ZTE-AN-ENVMON-MIB. | |||||||||||||||||||||
| NzxAnEnvMonGroups | 1.3.6.1.4.1.3902.1082.10.10.4.2 | ||||||||||||||||||||
| GzxAnEnvMonCapabilitiesGroup | 1.3.6.1.4.1.3902.1082.10.10.4.2.1 | ||||||||||||||||||||
group · current The collection of objects which are used to represent environment management capabilities of this equipment. The bit value 1 means the function represented by this bit is supported by this equipment.
| |||||||||||||||||||||
| GzxAnEnvTempGroup | 1.3.6.1.4.1.3902.1082.10.10.4.2.2 | ||||||||||||||||||||
group · current The collection of objects which are used to represent the temperature information of this equipment/card and to set the temperature alarm threshold of the environment/card. | |||||||||||||||||||||
| GzxAnEnvCardTempGroup | 1.3.6.1.4.1.3902.1082.10.10.4.2.3 | ||||||||||||||||||||
group · current The collection of objects which are used to represent temperature performance of the card environment.
| |||||||||||||||||||||
| GzxAnEnvInterfaceGroup | 1.3.6.1.4.1.3902.1082.10.10.4.2.4 | ||||||||||||||||||||
group · current The collection of objects which are used to represent the interface connection of the equipment. | |||||||||||||||||||||
| GzxAnEnvPowerSupplyGroup | 1.3.6.1.4.1.3902.1082.10.10.4.2.5 | ||||||||||||||||||||
group · current The collection of objects which are used to provide power management functions, include power count and the voltage status of the power supply. | |||||||||||||||||||||
| GzxAnEnvFanTrayTableGroup | 1.3.6.1.4.1.3902.1082.10.10.4.2.6 | ||||||||||||||||||||
group · current The collection of objects which are used to provide fan management functions, include setting the speed control mode and the percentage of speed of the different speed level of the fan.
| |||||||||||||||||||||
| GzxAnEnvFanTableGroup | 1.3.6.1.4.1.3902.1082.10.10.4.2.7 | ||||||||||||||||||||
group · current The collection of objects which are used to provide the speed information and operational status of the fan. | |||||||||||||||||||||
| GzxAnEnvMonNotificationsGroup | 1.3.6.1.4.1.3902.1082.10.10.4.2.8 | ||||||||||||||||||||
group · current The notifications which indicate specific changes, include temperature, fan status, power status and gpon card status.
| |||||||||||||||||||||
Textual conventions
ZxAnEnvShutdownServiceTypeBitsnarrowband(3)p2p(2)xdsl(1)xpon(0)A set of service type defined in environment monitor module that may be shut down in protection action, each bit refers to a type: Bit 00 : xPON service. Bit 01 : xDSL service. Bit 02 : P2P service. Bit 03 : narrowband service.
Traps / Notifications
- zxAnEnvACPowerDownAlm
1.3.6.1.4.1.3902.1082.10.10.3.3.11 - zxAnEnvACPowerDownClr
1.3.6.1.4.1.3902.1082.10.10.3.3.12 - zxAnEnvBatteryUnderVoltageAlm
1.3.6.1.4.1.3902.1082.10.10.3.3.15 - zxAnEnvBatteryUnderVoltageClr
1.3.6.1.4.1.3902.1082.10.10.3.3.16 - zxAnEnvCardNearCriticalTempAlm
1.3.6.1.4.1.3902.1082.10.10.3.1.36 - zxAnEnvCardNearCriticalTempClr
1.3.6.1.4.1.3902.1082.10.10.3.1.37 - zxAnEnvCardShutdownAlm
1.3.6.1.4.1.3902.1082.10.10.3.1.30 - zxAnEnvCardShutdownClr
1.3.6.1.4.1.3902.1082.10.10.3.1.31 - zxAnEnvCriticalTempAlm
1.3.6.1.4.1.3902.1082.10.10.3.1.6 - zxAnEnvCriticalTempClr
1.3.6.1.4.1.3902.1082.10.10.3.1.7 - zxAnEnvDeviceAbnormalAlm
1.3.6.1.4.1.3902.1082.10.10.3.5.1 - zxAnEnvDeviceAbnormalClr
1.3.6.1.4.1.3902.1082.10.10.3.5.2 - zxAnEnvEmergencyPowerSaveAlm
1.3.6.1.4.1.3902.1082.10.10.3.3.9 - zxAnEnvEmergencyPowerSaveClr
1.3.6.1.4.1.3902.1082.10.10.3.3.10 - zxAnEnvFanFailureAlm
1.3.6.1.4.1.3902.1082.10.10.3.4.5 - zxAnEnvFanFailureClr
1.3.6.1.4.1.3902.1082.10.10.3.4.6 - zxAnEnvFanLinkDown
1.3.6.1.4.1.3902.1082.10.10.3.4.1 - zxAnEnvFanLinkUp
1.3.6.1.4.1.3902.1082.10.10.3.4.2 - zxAnEnvFanTrayLinkDown
1.3.6.1.4.1.3902.1082.10.10.3.4.3 - zxAnEnvFanTrayLinkUp
1.3.6.1.4.1.3902.1082.10.10.3.4.4 - zxAnEnvHeatRadiationAbnormalAlm
1.3.6.1.4.1.3902.1082.10.10.3.1.40 - zxAnEnvHeatRadiationAbnormalClr
1.3.6.1.4.1.3902.1082.10.10.3.1.41 - zxAnEnvHighTempAlm
1.3.6.1.4.1.3902.1082.10.10.3.1.1 - zxAnEnvHighTempClr
1.3.6.1.4.1.3902.1082.10.10.3.1.2 - zxAnEnvLowTempAlm
1.3.6.1.4.1.3902.1082.10.10.3.1.8 - zxAnEnvLowTempClr
1.3.6.1.4.1.3902.1082.10.10.3.1.9 - zxAnEnvMonitorInterfaceLinkDown
1.3.6.1.4.1.3902.1082.10.10.3.2.1 - zxAnEnvMonitorInterfaceLinkUp
1.3.6.1.4.1.3902.1082.10.10.3.2.2 - zxAnEnvNearCriticalTempAlm
1.3.6.1.4.1.3902.1082.10.10.3.1.34 - zxAnEnvNearCriticalTempClr
1.3.6.1.4.1.3902.1082.10.10.3.1.35 - zxAnEnvNoBatteryAlm
1.3.6.1.4.1.3902.1082.10.10.3.3.13 - zxAnEnvNoBatteryClr
1.3.6.1.4.1.3902.1082.10.10.3.3.14 - zxAnEnvOptNearCriticalTempAlm
1.3.6.1.4.1.3902.1082.10.10.3.1.38 - zxAnEnvOptNearCriticalTempClr
1.3.6.1.4.1.3902.1082.10.10.3.1.39 - zxAnEnvPowerOff
1.3.6.1.4.1.3902.1082.10.10.3.3.7 - zxAnEnvPowerOn
1.3.6.1.4.1.3902.1082.10.10.3.3.8 - zxAnEnvPowerOverVoltageAlm
1.3.6.1.4.1.3902.1082.10.10.3.3.3 - zxAnEnvPowerOverVoltageClr
1.3.6.1.4.1.3902.1082.10.10.3.3.4 - zxAnEnvPowerSupplyModuleDown
1.3.6.1.4.1.3902.1082.10.10.3.3.1 - zxAnEnvPowerSupplyModuleUp
1.3.6.1.4.1.3902.1082.10.10.3.3.2 - zxAnEnvPowerUnderVoltageAlm
1.3.6.1.4.1.3902.1082.10.10.3.3.5 - zxAnEnvPowerUnderVoltageClr
1.3.6.1.4.1.3902.1082.10.10.3.3.6 - zxAnEnvTempSensorFailure
1.3.6.1.4.1.3902.1082.10.10.3.1.5 - zxAnEnvTemperatureAbnormalAlm
1.3.6.1.4.1.3902.1082.10.10.3.1.32 - zxAnEnvTemperatureAbnormalClr
1.3.6.1.4.1.3902.1082.10.10.3.1.33