ZTE-AN-CHASSIS-MIB
Zhongxing Telecom Co.,ltd. (abbr. ZTE)This MIB defines zte Access Node chassis managed objects.
snmptranslate -m ZTE-AN-CHASSIS-MIB -Tpsnmpwalk -v2c -c <community> -m ZTE-AN-CHASSIS-MIB <host> 1.3.6.1.4.1.3902.1082.10.1Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| ZTE-AN-SMI | zxAccessNode, zxAnEquipment |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IzxAnChassisMib | 1.3.6.1.4.1.3902.1082.10.1 | ||||||||||||||||||||
identity This MIB defines zte Access Node chassis managed objects. | |||||||||||||||||||||
| NzxAnChassisGlobalObjects | 1.3.6.1.4.1.3902.1082.10.1.1 | ||||||||||||||||||||
| SzxAnChassisSysReboot | 1.3.6.1.4.1.3902.1082.10.1.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Reboot system.
| |||||||||||||||||||||
| SzxAnChassisSysLastRebootReason | 1.3.6.1.4.1.3902.1082.10.1.1.2 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current It indicates device coldstart or warmstart reason byCli(1) warmstart by command, byNms(2) warmstart by network management, byWatchdog(3) warmstart by watchdog, byPowerOff(4) coldstart by poweroff, byProcessSuspended(6) warmstart by process suspended, unknown (99) restart by other reason.
| |||||||||||||||||||||
| SzxAnChassisSysLastSwapReason | 1.3.6.1.4.1.3902.1082.10.1.1.3 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Last swap request,such as force,plug-out or others.
forced(1) swap by command or network management,
cardOffline(2) swap by the main control board poweroff
or pull out,
reset(3) swap by the main control board reset self,
cardDown(99) swap by other reason.
| |||||||||||||||||||||
| SzxAnChassisPnpMode | 1.3.6.1.4.1.3902.1082.10.1.1.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current config Ne card PNP mode,PNP mode means when card on shelf, then this card can use without add it
| |||||||||||||||||||||
| NzxAnChassisObjects | 1.3.6.1.4.1.3902.1082.10.1.2 | ||||||||||||||||||||
| TzxAnRackTable | 1.3.6.1.4.1.3902.1082.10.1.2.2 | NA | |||||||||||||||||||
table · not-accessible · current This table includes the enable or disable plug and play of the rack. | |||||||||||||||||||||
| RzxAnRackEntry | 1.3.6.1.4.1.3902.1082.10.1.2.2.1 | NA | |||||||||||||||||||
| CzxAnRack | 1.3.6.1.4.1.3902.1082.10.1.2.2.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current The range of zxAnRack is 1~1 for DT | |||||||||||||||||||||
| CzxAnRackActualType | 1.3.6.1.4.1.3902.1082.10.1.2.2.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This MIB is defined for actual rack type. | |||||||||||||||||||||
| CzxAnRackConfType | 1.3.6.1.4.1.3902.1082.10.1.2.2.1.3 | Integer32 | RC | ||||||||||||||||||
column · Integer32 · read-create · current This MIB is defined for configged rack type. | |||||||||||||||||||||
| CzxAnRackInvSn | 1.3.6.1.4.1.3902.1082.10.1.2.2.1.4 | DisplayString (SIZE (0..32)) | RC | ||||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-create · current This MIB is defined for serial number of this rack. it is used by inventroy management. | |||||||||||||||||||||
| CzxAnRackRowStatus | 1.3.6.1.4.1.3902.1082.10.1.2.2.1.50 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot be created until the corresponding zxAnRackConfType have been set. To delete a row in this table, a manager must set this object to destroy(6). | |||||||||||||||||||||
| TzxAnShelfTable | 1.3.6.1.4.1.3902.1082.10.1.2.3 | NA | |||||||||||||||||||
table · not-accessible · current This table includes the enable or disable plug and play of the shelf. | |||||||||||||||||||||
| RzxAnShelfEntry | 1.3.6.1.4.1.3902.1082.10.1.2.3.1 | NA | |||||||||||||||||||
| CzxAnShelf | 1.3.6.1.4.1.3902.1082.10.1.2.3.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current The range of zxAnShelf is 1~1 for DT | |||||||||||||||||||||
| CzxAnShelfHardwareVersion | 1.3.6.1.4.1.3902.1082.10.1.2.3.1.2 | DisplayString (SIZE (0..64)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..64)) · read-only · current The hard driver on the shelf. | |||||||||||||||||||||
| CzxAnShelfActualType | 1.3.6.1.4.1.3902.1082.10.1.2.3.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The actual shelf type. | |||||||||||||||||||||
| CzxAnShelfConfType | 1.3.6.1.4.1.3902.1082.10.1.2.3.1.4 | Integer32 | RC | ||||||||||||||||||
column · Integer32 · read-create · current The configuration shelf type. | |||||||||||||||||||||
| CzxAnShelfInvSn | 1.3.6.1.4.1.3902.1082.10.1.2.3.1.5 | DisplayString (SIZE (0..32)) | RC | ||||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-create · current The serial number of this shelf. it is used by inventroy management. | |||||||||||||||||||||
| CzxAnShelfCleiCode | 1.3.6.1.4.1.3902.1082.10.1.2.3.1.6 | DisplayString (SIZE (0..64)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..64)) · read-only · current The CLEI code of this Shelf. it is used by inventroy management.Please reference http://www.commonlanguage.com to get knowledge about CLEI code. | |||||||||||||||||||||
| CzxAnLogicShelfNo | 1.3.6.1.4.1.3902.1082.10.1.2.3.1.7 | Integer32 | RC | ||||||||||||||||||
column · Integer32 · read-create · current The logic Shelf number | |||||||||||||||||||||
| CzxAnShelfRowStatus | 1.3.6.1.4.1.3902.1082.10.1.2.3.1.50 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot be created until the corresponding zxAnShelfConfType have been set. To delete a row in this table, a manager must set this object to destroy(6). | |||||||||||||||||||||
| TzxAnCardTable | 1.3.6.1.4.1.3902.1082.10.1.2.4 | NA | |||||||||||||||||||
table · not-accessible · current This table includes the enable or disable plug and play of the Card. | |||||||||||||||||||||
| RzxAnCardEntry | 1.3.6.1.4.1.3902.1082.10.1.2.4.1 | NA | |||||||||||||||||||
| CzxAnSlot | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current The range of zxAnSlot is 0~20 for DT IEC-SHELF, and the range of zxAnSlot is 0~22 for DT ETSI-SHELF | |||||||||||||||||||||
| CzxAnCardConfMainType | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.2 | Integer32 | RC | 599041 | |||||||||||||||||
column · Integer32 · read-create · current The main card type to config on the slot. Main card type indicates the category of hardware, such as 64-ports adsl card,4-ports ethernet card. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardActualMainType | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.3 | Integer32 | RO | 599137 | |||||||||||||||||
column · Integer32 · read-only · current The actually main card type on the slot. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardActualType | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.4 | DisplayString (SIZE (0..32)) | RO | GTGOG | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current The actually card type on the slot. Card type
indicates the type of detailed hardware,such as ATUGA
and ATUGB, they'er all 32-ports Adsl card and they all
provide general Adsl service,but they have different
chips.
NOTE: The value of this variable MUST abide by ZTE'S
discipline for card naming.And It MUST capital letters.Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardOperStatus | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.5 | INTEGER | RO | inService(1) | |||||||||||||||||
column · INTEGER · read-only · current This MIB is defined for the card status.
inService(1) -- card plugged in,running normally and service is
being provided normally.
notInService(2)-- card plugged in,running normally but service is
stopped.
hwOnline(3) -- card plugged in and card communication is ok, but
software isn't running now.
hwOffline(4) -- card is pulled out or card not plugged in, but
added to agent's database only.
configuring(5) -- card plugged in, but it is configuring.
configFailed(6)-- card plugged in, but configuration failed.
typeMismatch(7)-- card plugged in, but it's type is mismatch.
deactived(8) -- card plugged in, but it is deactivated by a
manager.
faulty(9) -- fault occurs when card is running normally
invalid(10) -- invalid card instance, such as adding card failed.
noPower(11) -- power card plugged in, but no power input.
unauthorized(12) -- card plugged in, but it's bugsell and the
software of the card doesn't run now.
powerSaving(34) -- card plugged in, but it's power saving status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardAdminStatus | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.6 | INTEGER | RC | active(4) | |||||||||||||||||
column · INTEGER · read-create · current This MIB is defined for the card admin status on the
card. For example:reset(1),switch(2)
reset(1) -- reset the card.
switch(2) -- switch card between master and slave
status.
stopService(3) -- stop service normally.
active(4) -- activate this card and enable the
service.
deactive(5) -- deactivate this card and disable the
service forcedly.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardPortNums | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.7 | Integer32 | RO | 8 | |||||||||||||||||
column · Integer32 · read-only · current The numbers of physical port which contained in this board. If the board has no this attribute,it should be 0. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardActivePortNums | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.8 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current The numbers of actived physical port which contained in this board. If the board has no this attribute,it should be 0. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardCpuLoad | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.9 | Integer32 (0..100) | RO | 11 | |||||||||||||||||
column · Integer32 (0..100) · read-only · current The current CPU load of this board.If this board has more than one CPU,the average value is allowed. If the board has no this attribute,it should be 0.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardCpuLoadThreshold | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.10 | Integer32 (1..100) | RC | 100 | |||||||||||||||||
column · Integer32 (1..100) · read-create · current The CPU load threshold of this board.When zxAnCardCpuLoad is higher than zxAnCardCpuLoadThreshold,zxAnChassisCardCpuOverloadAlm trap should be generated by agent.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardMemUsage | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.11 | Integer32 (0..100) | RO | 26 | |||||||||||||||||
column · Integer32 (0..100) · read-only · current The current memory usage of this board. If the board has no this attribute,it should be 0.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardMemUsageThreshold | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.12 | Integer32 (1..100) | RC | 100 | |||||||||||||||||
column · Integer32 (1..100) · read-create · current The memory usage threshold of this board. When zxAnCardMemUsage is higher than zxAnCardMemUsageThreshold,zxAnChassisCardMemOverloadAlm trap should be generated by agent.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardStandbyStatus | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.13 | INTEGER | RO | main(1) | |||||||||||||||||
column · INTEGER · read-only · current The card operation status on the card.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardInvSn | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.14 | DisplayString (SIZE (0..32)) | RC | 731946300021 | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-create · current The serial number of this card. it is used by inventroy management. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardCleiCode | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.15 | DisplayString (SIZE (0..64)) | RO | | |||||||||||||||||
column · DisplayString (SIZE (0..64)) · read-only · current The CLEI code of this card. it is used by inventroy management.Please reference http://www.commonlanguage.com to get knowledge about CLEI code. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardAccessoriesType | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.16 | DisplayString (SIZE (0..64)) | RO | | |||||||||||||||||
column · DisplayString (SIZE (0..64)) · read-only · current The accessories type of this card, such as splitter of DSLAM,the value of this variable should be the type of hardware, eg. PNVTA,PNVNP,PNVNA of ZXDSL9800's splitter. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardAccessoriesOperStatus | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.17 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current The operational status of the card accessories.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardMemSize | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.19 | Integer32 | RO | 512 | |||||||||||||||||
column · Integer32 · read-only · current The current memory size of this board. If the board has no this attribute,it should be 0.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardAvailableStorageSize | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.21 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current The available storage space size in this card.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardTotalStorageSize | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.22 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current The total storage space size in this card.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardHardwareVersion | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.23 | DisplayString (SIZE (0..64)) | RO | V1.0.0 | |||||||||||||||||
column · DisplayString (SIZE (0..64)) · read-only · current The hard version in this card. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardPowerSavingEnable | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.24 | INTEGER | RC | disabled(2) | |||||||||||||||||
column · INTEGER · read-create · current Enable or disable the power saving of the card.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardLastStartupTime | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.25 | DateAndTime | RO | \x07\xe5\x0b\x06\r*\x15\x06 | |||||||||||||||||
column · DateAndTime · read-only · current The last startup time of the card. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardCpldVersion | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.26 | DisplayString (SIZE (0..64)) | RO | V1.3 | |||||||||||||||||
column · DisplayString (SIZE (0..64)) · read-only · current The CPLD version in this card. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardFirmwareVersion | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.27 | DisplayString (SIZE (0..64)) | RO | | |||||||||||||||||
column · DisplayString (SIZE (0..64)) · read-only · current The firmware version in this card. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardOtherFirmwareVersions | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.28 | DisplayString (SIZE (0..64)) | RO | pm.fw(V4.0.14) | |||||||||||||||||
column · DisplayString (SIZE (0..64)) · read-only · current The other firmware versions in this card. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CzxAnCardRowStatus | 1.3.6.1.4.1.3902.1082.10.1.2.4.1.50 | RowStatus | RC | 1 | |||||||||||||||||
column · RowStatus · read-create · current The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot be created until the corresponding zxAnExampleFunc2Xxx1Var1 and zxAnExampleFunc2Xxx1Var2 have been set. To delete a row in this table, a manager must sets this object to destroy(6). Example values from LibreNMS test devices
| |||||||||||||||||||||
| TzxAnSubcardTable | 1.3.6.1.4.1.3902.1082.10.1.2.5 | NA | |||||||||||||||||||
table · not-accessible · current This table includes the enable or disable plug and play of the subcard. | |||||||||||||||||||||
| RzxAnSubcardEntry | 1.3.6.1.4.1.3902.1082.10.1.2.5.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in zxAnSubcardTable.
| |||||||||||||||||||||
| CzxAnSubcard | 1.3.6.1.4.1.3902.1082.10.1.2.5.1.1 | Integer32 | NA | ||||||||||||||||||
| CzxAnSubcardConfMainType | 1.3.6.1.4.1.3902.1082.10.1.2.5.1.2 | Integer32 | RC | ||||||||||||||||||
column · Integer32 · read-create · current The main subcard type to config on the slot. Main subcard type indicates the category of hardware,such as 4-ports ethernet subcard. | |||||||||||||||||||||
| CzxAnSubcardActualMainType | 1.3.6.1.4.1.3902.1082.10.1.2.5.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The actually main subcard type on the slot. | |||||||||||||||||||||
| CzxAnSubcardActualType | 1.3.6.1.4.1.3902.1082.10.1.2.5.1.4 | DisplayString (SIZE (0..32)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current The actually subcard type on the slot. It indicates the type of detailed hardware. NOTE: The value of this variable MUST abide by ZTE'S discipline for card naming.And It MUST capital letters. | |||||||||||||||||||||
| CzxAnSubcardOperStatus | 1.3.6.1.4.1.3902.1082.10.1.2.5.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This MIB is defined for the sub card status on the
card.
inService(1) -- card pluged in,running normally and service is
being provided normally.
notInService(2)-- card pluged in,running normally but service is
stopped.
hwOffline(3) -- card not pluged in,but added to agent's database
only
hwOnline(4) -- card pluged in,but software isn't running now.
configuring(5) -- card pluged in,but it is configuring
configFailed(6)-- card pluged in,but configuration failed
typeMismatch(7)-- card pluged in,but it's type is mismatch
deactived(8) -- card pluged in,but it is deactivated by a manager
faulty(9) -- fault occurs when card is running normally
invalid(10) -- invalid card instance,such as adding card failed.
| |||||||||||||||||||||
| CzxAnSubcardAdminStatus | 1.3.6.1.4.1.3902.1082.10.1.2.5.1.6 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current This MIB is defined for the card admin status on the
card. For example:reset(1),switch(2)
reset(1) -- reset the card.
switch(2) -- switch card between master and slave
status.
stopService(3) -- stop service normally.
active(4) -- activate this card and enable the
service.
deactive(5) -- deactivate this card and disable the
service forcedly.
| |||||||||||||||||||||
| CzxAnSubcardPortNums | 1.3.6.1.4.1.3902.1082.10.1.2.5.1.7 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The numbers of physical port which contained in this
board.
If the board has no this attribute,it should be 0. | |||||||||||||||||||||
| CzxAnSubcardActivePortNums | 1.3.6.1.4.1.3902.1082.10.1.2.5.1.8 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The numbers of actived physical port which contained in this board. If the board has no this attribute,it should be 0. | |||||||||||||||||||||
| CzxAnSubcardCpuLoad | 1.3.6.1.4.1.3902.1082.10.1.2.5.1.9 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current CPU load of this board.If this board has more than one CPU,the average value is allowed. If the board has no this attribute,it should be 0.
| |||||||||||||||||||||
| CzxAnSubcardMemUsage | 1.3.6.1.4.1.3902.1082.10.1.2.5.1.10 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current memory usage of this board. If the board has no this attribute,it should be 0.
| |||||||||||||||||||||
| CzxAnSubcardInvSn | 1.3.6.1.4.1.3902.1082.10.1.2.5.1.11 | DisplayString (SIZE (0..64)) | RC | ||||||||||||||||||
column · DisplayString (SIZE (0..64)) · read-create · current The serial number of this subcard. it is used by inventroy management. | |||||||||||||||||||||
| CzxAnSubcardCleiCode | 1.3.6.1.4.1.3902.1082.10.1.2.5.1.12 | DisplayString (SIZE (0..64)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..64)) · read-only · current The CLEI code of this card. it is used by inventroy management.Please reference http://www.commonlanguage.com to get knowledge about CLEI code. | |||||||||||||||||||||
| CzxAnSubcardMemSize | 1.3.6.1.4.1.3902.1082.10.1.2.5.1.13 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current memory size of this sub card. If the board has no this attribute,it should be 0.
| |||||||||||||||||||||
| CzxAnSubcardHardwareVersion | 1.3.6.1.4.1.3902.1082.10.1.2.5.1.14 | DisplayString (SIZE (0..64)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..64)) · read-only · current The hard version in this sub card. | |||||||||||||||||||||
| CzxAnSubcardRowStatus | 1.3.6.1.4.1.3902.1082.10.1.2.5.1.50 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The row status of this entry. | |||||||||||||||||||||
| TzxAnCardCpuTable | 1.3.6.1.4.1.3902.1082.10.1.2.6 | NA | |||||||||||||||||||
table · not-accessible · current This table includes the CPU information of the card. | |||||||||||||||||||||
| RzxAnCardCpuEntry | 1.3.6.1.4.1.3902.1082.10.1.2.6.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in zxAnCardCpuTable.
| |||||||||||||||||||||
| CzxAnCardCpuId | 1.3.6.1.4.1.3902.1082.10.1.2.6.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current The CPU ID of the card. | |||||||||||||||||||||
| CzxAnCardCpuUsage | 1.3.6.1.4.1.3902.1082.10.1.2.6.1.2 | Integer32 (0..100) | RO | ||||||||||||||||||
column · Integer32 (0..100) · read-only · current The CPU usage of the zxAnCardCpuId.
| |||||||||||||||||||||
| TzxAnStorageDeviceTable | 1.3.6.1.4.1.3902.1082.10.1.2.7 | NA | |||||||||||||||||||
table · not-accessible · current This table includes file storage devices information. | |||||||||||||||||||||
| RzxAnStorageDeviceEntry | 1.3.6.1.4.1.3902.1082.10.1.2.7.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in zxAnStorageDeviceTable.
| |||||||||||||||||||||
| CzxAnStorageDeviceId | 1.3.6.1.4.1.3902.1082.10.1.2.7.1.1 | Integer32 | NA | ||||||||||||||||||
column · Integer32 · not-accessible · current The ID of the storage device. The numbering rule is: 1: Flash1, 2: SD card, 3: RAM card, 4: Flash2, ... | |||||||||||||||||||||
| CzxAnStorageDeviceAccessEnable | 1.3.6.1.4.1.3902.1082.10.1.2.7.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enables and disables the access permissions to the storage device. If the storage device is disabled, the storage device can't be read or written.
| |||||||||||||||||||||
| CzxAnStorageDeviceOperStatus | 1.3.6.1.4.1.3902.1082.10.1.2.7.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The operational status of the storage device.
| |||||||||||||||||||||
| CzxAnStorageDeviceAccessStatus | 1.3.6.1.4.1.3902.1082.10.1.2.7.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The access status of the storage device. idle(1): the storage device can be read or written. busy(2): the storage device is being read or written. locked(3): the storage device can be read, but can't be written. unknown(255): unknown.
| |||||||||||||||||||||
| CzxAnStorageDeviceTotalSpace | 1.3.6.1.4.1.3902.1082.10.1.2.7.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The total space of the storage device.
| |||||||||||||||||||||
| CzxAnStorageDeviceAvailableSpace | 1.3.6.1.4.1.3902.1082.10.1.2.7.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The available space of the storage device.
| |||||||||||||||||||||
| NzxAnChassisNotifications | 1.3.6.1.4.1.3902.1082.10.1.3 | ||||||||||||||||||||
| NzxAnChassisSysTraps | 1.3.6.1.4.1.3902.1082.10.1.3.1 | ||||||||||||||||||||
| !zxAnChassisCtrlCardSwappedAlm | 1.3.6.1.4.1.3902.1082.10.1.3.1.2 | ||||||||||||||||||||
notification · current A zxAnChassisCtrlCardSwappedAlm trap indicates that the main control card has swapped to slave card. | |||||||||||||||||||||
| !zxAnChassisCtrlCardSwappedClr | 1.3.6.1.4.1.3902.1082.10.1.3.1.3 | ||||||||||||||||||||
notification · current A zxAnChassisCtrlCardSwappedClr trap indicates that the main control card swapped trap has cleared. | |||||||||||||||||||||
| NzxAnChassisCardTraps | 1.3.6.1.4.1.3902.1082.10.1.3.2 | ||||||||||||||||||||
| !zxAnChassisCardOffline | 1.3.6.1.4.1.3902.1082.10.1.3.2.1 | ||||||||||||||||||||
notification · current A zxAnChassisCardOffline trap is sent when the agent has detected that the configured card has plugged out. | |||||||||||||||||||||
| !zxAnChassisCardOnline | 1.3.6.1.4.1.3902.1082.10.1.3.2.2 | ||||||||||||||||||||
notification · current A zxAnChassisCardOnline trap is sent when the agent has detected that the configured card has plugged in. | |||||||||||||||||||||
| !zxAnChassisCardTypeMismatchAlm | 1.3.6.1.4.1.3902.1082.10.1.3.2.3 | ||||||||||||||||||||
notification · current A zxAnChassisCardTypeMismatchAlm trap is sent when the agent has detected that the card has plugged in ,but zxAnCardConfMainType is not same as zxAnCardActualType. | |||||||||||||||||||||
| !zxAnChassisCardTypeMismatchClr | 1.3.6.1.4.1.3902.1082.10.1.3.2.4 | ||||||||||||||||||||
notification · current A zxAnChassisCardTypeMismatchClr trap is sent when the agent has detected that the card has plugged in and zxAnCardConfMainType is same as zxAnCardActualType. | |||||||||||||||||||||
| !zxAnChassisCardNotRunningAlm | 1.3.6.1.4.1.3902.1082.10.1.3.2.5 | ||||||||||||||||||||
notification · current A zxAnChassisCardNotRunningAlm trap is sent when the agent has detected that the card has plugged in and configured, but it is not running. | |||||||||||||||||||||
| !zxAnChassisCardNotRunningClr | 1.3.6.1.4.1.3902.1082.10.1.3.2.6 | ||||||||||||||||||||
notification · current A zxAnChassisCardNotRunningClr trap is sent when the agent has detected that the card is inservice. | |||||||||||||||||||||
| !zxAnChassisCardNotConfiguredAlm | 1.3.6.1.4.1.3902.1082.10.1.3.2.7 | ||||||||||||||||||||
notification · current A zxAnEquipCardNotConfigured trap is sent when the agent has detected that the card has plugged in but not configured. | |||||||||||||||||||||
| !zxAnChassisCardNotConfiguredClr | 1.3.6.1.4.1.3902.1082.10.1.3.2.8 | ||||||||||||||||||||
notification · current A zxAnChassisCardNotConfiguredClr trap is sent when the agent has detected that the card has plugged in and configured. | |||||||||||||||||||||
| !zxAnChassisCardCpuOverloadAlm | 1.3.6.1.4.1.3902.1082.10.1.3.2.20 | ||||||||||||||||||||
notification · current It indicates that the agent has detected that the zxAnChassisCardCPULoad object of one card has exceeded the configured threshhold value of zxAnCardCpuLoadThreshhold. | |||||||||||||||||||||
| !zxAnChassisCardCpuOverloadClr | 1.3.6.1.4.1.3902.1082.10.1.3.2.21 | ||||||||||||||||||||
notification · current It indicates that the agent has detected that the zxAnChassisCardCPULoad object of one card has less than the configured threshhold value of zxAnCardCpuLoadThreshhold. | |||||||||||||||||||||
| !zxAnChassisCardMemOverloadAlm | 1.3.6.1.4.1.3902.1082.10.1.3.2.22 | ||||||||||||||||||||
notification · current It indicates that the agent has detected that the zxAnChassisCardMemUsage object of one card has exceeded the configured threshhold value of zxAnCardMemUsageThreshhold. | |||||||||||||||||||||
| !zxAnChassisCardMemOverloadClr | 1.3.6.1.4.1.3902.1082.10.1.3.2.23 | ||||||||||||||||||||
notification · current It indicates that the agent has detected that the zxAnChassisCardMemUsage object of one card has less than the configured threshhold value of zxAnCardMemUsageThreshhold. | |||||||||||||||||||||
| !zxAnChassisCardResourceAdded | 1.3.6.1.4.1.3902.1082.10.1.3.2.24 | ||||||||||||||||||||
notification · current A zxAnChassisCardResourceAdded trap is sent when the agent has detected that the card has come into inService status. | |||||||||||||||||||||
| !zxAnChassisCardResourceDeleted | 1.3.6.1.4.1.3902.1082.10.1.3.2.25 | ||||||||||||||||||||
notification · current A zxAnChassisCardResourceDeleted trap is sent when the agent has detected that the card has been deleted. | |||||||||||||||||||||
| NzxAnChassisSubcardTraps | 1.3.6.1.4.1.3902.1082.10.1.3.3 | ||||||||||||||||||||
| !zxAnChassisSubcardDown | 1.3.6.1.4.1.3902.1082.10.1.3.3.1 | ||||||||||||||||||||
notification · current It indicates that the agent has detected that the subcard operational status is abnormal. | |||||||||||||||||||||
| !zxAnChassisSubcardUp | 1.3.6.1.4.1.3902.1082.10.1.3.3.2 | ||||||||||||||||||||
notification · current It indicates that the agent has detected that the subcard has been online and come into inservice status. | |||||||||||||||||||||
| NzxAnChassisConformance | 1.3.6.1.4.1.3902.1082.10.1.4 | ||||||||||||||||||||
| NzxAnChassisCompliances | 1.3.6.1.4.1.3902.1082.10.1.4.1 | ||||||||||||||||||||
| MzxAnChassisCompliance | 1.3.6.1.4.1.3902.1082.10.1.4.1.1 | ||||||||||||||||||||
compliance · current The compliance statement for SNMP entities which implement the ZTE-AN-CHASSIS-MIB. | |||||||||||||||||||||
| NzxAnChassisGroups | 1.3.6.1.4.1.3902.1082.10.1.4.2 | ||||||||||||||||||||
| GzxAnChassisSysMgmtGroup | 1.3.6.1.4.1.3902.1082.10.1.4.2.1 | ||||||||||||||||||||
group · current The notifications which indicate reboot,set-pnp and last reboot or swap reason. | |||||||||||||||||||||
| GzxAnChassisRackMgmtGroup | 1.3.6.1.4.1.3902.1082.10.1.4.2.2 | ||||||||||||||||||||
group · current The collection of objects which are used to represent rack information and to manage rack. | |||||||||||||||||||||
| GzxAnChassisShelfMgmtGroup | 1.3.6.1.4.1.3902.1082.10.1.4.2.3 | ||||||||||||||||||||
group · current The collection of objects which are used to represent shelf information and to manage shelf. | |||||||||||||||||||||
| GzxAnChassisCardMgmtGroup | 1.3.6.1.4.1.3902.1082.10.1.4.2.4 | ||||||||||||||||||||
group · current The collection of objects which are used to represent card information and to manage card.
| |||||||||||||||||||||
| GzxAnChassisSubCardMgmtGroup | 1.3.6.1.4.1.3902.1082.10.1.4.2.5 | ||||||||||||||||||||
group · current The collection of objects which are used to represent subcard information and to manage subcard.
| |||||||||||||||||||||
| GzxAnChassisSysTrapsGroup | 1.3.6.1.4.1.3902.1082.10.1.4.2.6 | ||||||||||||||||||||
group · current The notifications which indicate swap information. | |||||||||||||||||||||
| GzxAnChassisCardTrapsGroup | 1.3.6.1.4.1.3902.1082.10.1.4.2.7 | ||||||||||||||||||||
group · current The notifications which indicate specific changes, include card status, card cpu load status and memory load status.
| |||||||||||||||||||||
Traps / Notifications
- zxAnChassisCardCpuOverloadAlm
1.3.6.1.4.1.3902.1082.10.1.3.2.20 - zxAnChassisCardCpuOverloadClr
1.3.6.1.4.1.3902.1082.10.1.3.2.21 - zxAnChassisCardMemOverloadAlm
1.3.6.1.4.1.3902.1082.10.1.3.2.22 - zxAnChassisCardMemOverloadClr
1.3.6.1.4.1.3902.1082.10.1.3.2.23 - zxAnChassisCardNotConfiguredAlm
1.3.6.1.4.1.3902.1082.10.1.3.2.7 - zxAnChassisCardNotConfiguredClr
1.3.6.1.4.1.3902.1082.10.1.3.2.8 - zxAnChassisCardNotRunningAlm
1.3.6.1.4.1.3902.1082.10.1.3.2.5 - zxAnChassisCardNotRunningClr
1.3.6.1.4.1.3902.1082.10.1.3.2.6 - zxAnChassisCardOffline
1.3.6.1.4.1.3902.1082.10.1.3.2.1 - zxAnChassisCardOnline
1.3.6.1.4.1.3902.1082.10.1.3.2.2 - zxAnChassisCardResourceAdded
1.3.6.1.4.1.3902.1082.10.1.3.2.24 - zxAnChassisCardResourceDeleted
1.3.6.1.4.1.3902.1082.10.1.3.2.25 - zxAnChassisCardTypeMismatchAlm
1.3.6.1.4.1.3902.1082.10.1.3.2.3 - zxAnChassisCardTypeMismatchClr
1.3.6.1.4.1.3902.1082.10.1.3.2.4 - zxAnChassisCtrlCardSwappedAlm
1.3.6.1.4.1.3902.1082.10.1.3.1.2 - zxAnChassisCtrlCardSwappedClr
1.3.6.1.4.1.3902.1082.10.1.3.1.3 - zxAnChassisSubcardDown
1.3.6.1.4.1.3902.1082.10.1.3.3.1 - zxAnChassisSubcardUp
1.3.6.1.4.1.3902.1082.10.1.3.3.2