WebGraph-8xThermometer-US-MIB
Wiesemann & Theis GmbHsnmptranslate -m WebGraph-8xThermometer-US-MIB -Tpsnmpwalk -v2c -c <community> -m WebGraph-8xThermometer-US-MIB <host> 1.3.6.1.4.1.5040Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nwut | 1.3.6.1.4.1.5040 | ||||||||||||
| NwtComServer | 1.3.6.1.4.1.5040.1 | ||||||||||||
| NwtWebio | 1.3.6.1.4.1.5040.1.2 | ||||||||||||
| NwtWebioAn8Graph | 1.3.6.1.4.1.5040.1.2.6 | ||||||||||||
| !wtWebioAn8GraphAlert1 | 1.3.6.1.4.1.5040.1.2.6.0.11 | ||||||||||||
notification This SNMP trap is generated when Alarm 1 was triggered, SNMP trap enable is set and SNMP is enabled.
| |||||||||||||
| !wtWebioAn8GraphAlert2 | 1.3.6.1.4.1.5040.1.2.6.0.12 | ||||||||||||
notification This SNMP trap is generated when Alarm 2 was triggered, SNMP trap enable is set and SNMP is enabled.
| |||||||||||||
| !wtWebioAn8GraphAlert3 | 1.3.6.1.4.1.5040.1.2.6.0.13 | ||||||||||||
notification This SNMP trap is generated when Alarm 3 was triggered, SNMP trap enable is set and SNMP is enabled.
| |||||||||||||
| !wtWebioAn8GraphAlert4 | 1.3.6.1.4.1.5040.1.2.6.0.14 | ||||||||||||
notification This SNMP trap is generated when Alarm 4 was triggered, SNMP trap enable is set and SNMP is enabled.
| |||||||||||||
| !wtWebioAn8GraphAlert5 | 1.3.6.1.4.1.5040.1.2.6.0.15 | ||||||||||||
notification This SNMP trap is generated when Alarm 5 was triggered, SNMP trap enable is set and SNMP is enabled.
| |||||||||||||
| !wtWebioAn8GraphAlert6 | 1.3.6.1.4.1.5040.1.2.6.0.16 | ||||||||||||
notification This SNMP trap is generated when Alarm 6 was triggered, SNMP trap enable is set and SNMP is enabled.
| |||||||||||||
| !wtWebioAn8GraphAlert7 | 1.3.6.1.4.1.5040.1.2.6.0.17 | ||||||||||||
notification This SNMP trap is generated when Alarm 7 was triggered, SNMP trap enable is set and SNMP is enabled.
| |||||||||||||
| !wtWebioAn8GraphAlert8 | 1.3.6.1.4.1.5040.1.2.6.0.18 | ||||||||||||
notification This SNMP trap is generated when Alarm 8 was triggered, SNMP trap enable is set and SNMP is enabled.
| |||||||||||||
| !wtWebioAn8GraphAlert9 | 1.3.6.1.4.1.5040.1.2.6.0.71 | ||||||||||||
notification This SNMP trap is generated when Alarm 1 was cleared, SNMP trap enable is set and SNMP is enabled. | |||||||||||||
| !wtWebioAn8GraphAlert10 | 1.3.6.1.4.1.5040.1.2.6.0.72 | ||||||||||||
notification This SNMP trap is generated when Alarm 2 was cleared, SNMP trap enable is set and SNMP is enabled. | |||||||||||||
| !wtWebioAn8GraphAlert11 | 1.3.6.1.4.1.5040.1.2.6.0.73 | ||||||||||||
notification This SNMP trap is generated when Alarm 3 was cleared, SNMP trap enable is set and SNMP is enabled. | |||||||||||||
| !wtWebioAn8GraphAlert12 | 1.3.6.1.4.1.5040.1.2.6.0.74 | ||||||||||||
notification This SNMP trap is generated when Alarm 4 was cleared, SNMP trap enable is set and SNMP is enabled. | |||||||||||||
| !wtWebioAn8GraphAlert13 | 1.3.6.1.4.1.5040.1.2.6.0.75 | ||||||||||||
notification This SNMP trap is generated when Alarm 5 was cleared, SNMP trap enable is set and SNMP is enabled. | |||||||||||||
| !wtWebioAn8GraphAlert14 | 1.3.6.1.4.1.5040.1.2.6.0.76 | ||||||||||||
notification This SNMP trap is generated when Alarm 6 was cleared, SNMP trap enable is set and SNMP is enabled. | |||||||||||||
| !wtWebioAn8GraphAlert15 | 1.3.6.1.4.1.5040.1.2.6.0.77 | ||||||||||||
notification This SNMP trap is generated when Alarm 7 was cleared, SNMP trap enable is set and SNMP is enabled. | |||||||||||||
| !wtWebioAn8GraphAlert16 | 1.3.6.1.4.1.5040.1.2.6.0.78 | ||||||||||||
notification This SNMP trap is generated when Alarm 8 was cleared, SNMP trap enable is set and SNMP is enabled. | |||||||||||||
| !wtWebioAn8GraphAlertDiag | 1.3.6.1.4.1.5040.1.2.6.0.110 | ||||||||||||
notification This SNMP trap is generated when a diagnosis/error message was triggered, SNMP trap enable is set and SNMP is enabled. | |||||||||||||
| NwtWebioAn8GraphTemp | 1.3.6.1.4.1.5040.1.2.6.1 | ||||||||||||
| SwtWebioAn8GraphSensors | 1.3.6.1.4.1.5040.1.2.6.1.1 | INTEGER (1..8) | RO | mandatory | 8 | ||||||||
scalar · INTEGER (1..8) · read-only · mandatory Number of temperature sensors Example values from LibreNMS test devices
| |||||||||||||
| TwtWebioAn8GraphSensorTable | 1.3.6.1.4.1.5040.1.2.6.1.2 | NA | mandatory | ||||||||||
table · not-accessible · mandatory List of sensors. | |||||||||||||
| RwtWebioAn8GraphSensorEntry | 1.3.6.1.4.1.5040.1.2.6.1.2.1 | NA | mandatory | ||||||||||
| CwtWebioAn8GraphSensorNo | 1.3.6.1.4.1.5040.1.2.6.1.2.1.1 | INTEGER (1..8) | RO | mandatory | 1 | ||||||||
| TwtWebioAn8GraphTempValueTable | 1.3.6.1.4.1.5040.1.2.6.1.3 | NA | mandatory | ||||||||||
table · not-accessible · mandatory List of temperature values corresponding to the channel numbers. | |||||||||||||
| RwtWebioAn8GraphTempValueEntry | 1.3.6.1.4.1.5040.1.2.6.1.3.1 | NA | mandatory | ||||||||||
| CwtWebioAn8GraphTempValue | 1.3.6.1.4.1.5040.1.2.6.1.3.1.1 | OCTET STRING (SIZE (5)) | RO | mandatory | 26,7 | ||||||||
| TwtWebioAn8GraphBinaryTempValueTable | 1.3.6.1.4.1.5040.1.2.6.1.4 | NA | mandatory | ||||||||||
table · not-accessible · mandatory List of binary temperature values corresponding to the channel numbers. | |||||||||||||
| RwtWebioAn8GraphBinaryTempValueEntry | 1.3.6.1.4.1.5040.1.2.6.1.4.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Binary temperature values of the sensors. | |||||||||||||
| CwtWebioAn8GraphBinaryTempValue | 1.3.6.1.4.1.5040.1.2.6.1.4.1.1 | INTEGER | RO | mandatory | 267 | ||||||||
| TwtWebioAn8GraphTempValuePktTable | 1.3.6.1.4.1.5040.1.2.6.1.8 | NA | mandatory | ||||||||||
table · not-accessible · mandatory List of temperature values corresponding to the channel numbers. | |||||||||||||
| RwtWebioAn8GraphTempValuePktEntry | 1.3.6.1.4.1.5040.1.2.6.1.8.1 | NA | mandatory | ||||||||||
| CwtWebioAn8GraphTempValuePkt | 1.3.6.1.4.1.5040.1.2.6.1.8.1.1 | OCTET STRING (SIZE (5)) | RO | mandatory | 26.7 | ||||||||
| NwtWebioAn8GraphSessCntrl | 1.3.6.1.4.1.5040.1.2.6.2 | ||||||||||||
| SwtWebioAn8GraphSessCntrlPassword | 1.3.6.1.4.1.5040.1.2.6.2.1 | OCTET STRING | RW | mandatory | | ||||||||
scalar · OCTET STRING · read-write · mandatory Entering this password opens a session which is ended by writing a 1 to wtWebioAn8GraphSessCntrlLogout. When read this variable provides a string of length zero. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphSessCntrlConfigMode | 1.3.6.1.4.1.5040.1.2.6.2.2 | INTEGER | RO | mandatory | wtWebioAn8GraphSessCntrl-NoSession(0) | ||||||||
scalar · INTEGER · read-only · mandatory When the device is in SNMP configuration mode, the value 1 is returned, otherwise 0. If the read value is 0 even though the password was written, the device is already in config mode and the variables can only be read.
Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphSessCntrlLogout | 1.3.6.1.4.1.5040.1.2.6.2.3 | INTEGER | RW | mandatory | 0 | ||||||||
scalar · INTEGER · read-write · mandatory If the device is in configuration mode and the session was opened by this SNMP Manager, writing a 1 to this variable will end the session and all parameters are stored. Writing a 2 discards all entries again. When read this variable provides the value 0. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphSessCntrlAdminPassword | 1.3.6.1.4.1.5040.1.2.6.2.4 | OCTET STRING | RW | mandatory | | ||||||||
scalar · OCTET STRING · read-write · mandatory This password protects access to the variables with administrator rights. It can only be changed by the administrator. If no password was assigned, the valid password is public. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphSessCntrlConfigPassword | 1.3.6.1.4.1.5040.1.2.6.2.5 | OCTET STRING | RW | mandatory | | ||||||||
scalar · OCTET STRING · read-write · mandatory This password protects access to the variables with configurator rights. It can be changed by the administrator and by the configurator. If no password was assigned, the valid password is public. When read this variable provides a null-pointer. Example values from LibreNMS test devices
| |||||||||||||
| NwtWebioAn8GraphConfig | 1.3.6.1.4.1.5040.1.2.6.3 | ||||||||||||
| NwtWebioAn8GraphDevice | 1.3.6.1.4.1.5040.1.2.6.3.1 | ||||||||||||
| NwtWebioAn8GraphText | 1.3.6.1.4.1.5040.1.2.6.3.1.1 | ||||||||||||
| SwtWebioAn8GraphDeviceName | 1.3.6.1.4.1.5040.1.2.6.3.1.1.1 | OCTET STRING | RW | mandatory | <private> | ||||||||
scalar · OCTET STRING · read-write · mandatory Name of the Webio, which is user definable. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphDeviceText | 1.3.6.1.4.1.5040.1.2.6.3.1.1.2 | OCTET STRING | RW | mandatory | | ||||||||
scalar · OCTET STRING · read-write · mandatory Description of the Webio, which is user definable. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphDeviceLocation | 1.3.6.1.4.1.5040.1.2.6.3.1.1.3 | OCTET STRING | RW | mandatory | <private> | ||||||||
scalar · OCTET STRING · read-write · mandatory Description of the location of the Webio, which is user definable. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphDeviceContact | 1.3.6.1.4.1.5040.1.2.6.3.1.1.4 | OCTET STRING | RW | mandatory | <private> | ||||||||
scalar · OCTET STRING · read-write · mandatory Contact address of the system operator of the Webio, which is user definable. Example values from LibreNMS test devices
| |||||||||||||
| NwtWebioAn8GraphTimeDate | 1.3.6.1.4.1.5040.1.2.6.3.1.2 | ||||||||||||
| NwtWebioAn8GraphTimeZone | 1.3.6.1.4.1.5040.1.2.6.3.1.2.1 | ||||||||||||
| SwtWebioAn8GraphTzOffsetHrs | 1.3.6.1.4.1.5040.1.2.6.3.1.2.1.1 | INTEGER | RW | mandatory | 1 | ||||||||
scalar · INTEGER · read-write · mandatory Offset hours for the time zone (winter time) with respect to UTC. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphTzOffsetMin | 1.3.6.1.4.1.5040.1.2.6.3.1.2.1.2 | INTEGER | RW | mandatory | 0 | ||||||||
scalar · INTEGER · read-write · mandatory Offset minutes for the time zone (winter time) with respect to UTC. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphTzEnable | 1.3.6.1.4.1.5040.1.2.6.3.1.2.1.3 | OCTET STRING (SIZE (4)) | RW | mandatory | 00:00:00:01 | ||||||||
scalar · OCTET STRING (SIZE (4)) · read-write · mandatory Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Timezone Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphStTzOffsetHrs | 1.3.6.1.4.1.5040.1.2.6.3.1.2.1.4 | INTEGER | RW | mandatory | 2 | ||||||||
scalar · INTEGER · read-write · mandatory Offset hours of the time zone (summer time) with respect to UTC. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphStTzOffsetMin | 1.3.6.1.4.1.5040.1.2.6.3.1.2.1.5 | INTEGER | RW | mandatory | 0 | ||||||||
scalar · INTEGER · read-write · mandatory Offset minutes of the time zone (summer time) with respect to UTC. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphStTzEnable | 1.3.6.1.4.1.5040.1.2.6.3.1.2.1.6 | OCTET STRING (SIZE (4)) | RW | mandatory | 00:00:00:01 | ||||||||
scalar · OCTET STRING (SIZE (4)) · read-write · mandatory Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Summertime Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphStTzStartMonth | 1.3.6.1.4.1.5040.1.2.6.3.1.2.1.7 | INTEGER | RW | mandatory | wtWebioAn8GraphStartMonth-March(3) | ||||||||
scalar · INTEGER · read-write · mandatory Month in which the change is made from winter time to summer time.
Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphStTzStartMode | 1.3.6.1.4.1.5040.1.2.6.3.1.2.1.8 | INTEGER | RW | mandatory | wtWebioAn8GraphStartMode-last(5) | ||||||||
scalar · INTEGER · read-write · mandatory Mode of the day of the week for which the change is made from winter time to summer time.
Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphStTzStartWday | 1.3.6.1.4.1.5040.1.2.6.3.1.2.1.9 | INTEGER | RW | mandatory | wtWebioAn8GraphStartWday-Sunday(1) | ||||||||
scalar · INTEGER · read-write · mandatory Day of the week on which the change is made from winter time to summer time
Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphStTzStartHrs | 1.3.6.1.4.1.5040.1.2.6.3.1.2.1.10 | INTEGER | RW | mandatory | 2 | ||||||||
scalar · INTEGER · read-write · mandatory Hour in which the time zone is changed from winter to summer time with respect to UTC. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphStTzStartMin | 1.3.6.1.4.1.5040.1.2.6.3.1.2.1.11 | INTEGER | RW | mandatory | 0 | ||||||||
scalar · INTEGER · read-write · mandatory Minute in which the time zone is changed from winter to summer time with respect to UTC. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphStTzStopMonth | 1.3.6.1.4.1.5040.1.2.6.3.1.2.1.12 | INTEGER | RW | mandatory | wtWebioAn8GraphStopMonth-October(10) | ||||||||
scalar · INTEGER · read-write · mandatory Month in which the change is made from summer time to winter time.
Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphStTzStopMode | 1.3.6.1.4.1.5040.1.2.6.3.1.2.1.13 | INTEGER | RW | mandatory | wtWebioAn8GraphStopMode-last(5) | ||||||||
scalar · INTEGER · read-write · mandatory Mode of the week day on which the change is made from summer time to winter time.
Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphStTzStopWday | 1.3.6.1.4.1.5040.1.2.6.3.1.2.1.14 | INTEGER | RW | mandatory | wtWebioAn8GraphStopWday-Sunday(1) | ||||||||
scalar · INTEGER · read-write · mandatory Day of the week on which the change is made from summer time to winter time.
Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphStTzStopHrs | 1.3.6.1.4.1.5040.1.2.6.3.1.2.1.15 | INTEGER | RW | mandatory | 3 | ||||||||
scalar · INTEGER · read-write · mandatory Hour at which the time zone is changed from summer to winter time with respect to UTC. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphStTzStopMin | 1.3.6.1.4.1.5040.1.2.6.3.1.2.1.16 | INTEGER | RW | mandatory | 0 | ||||||||
scalar · INTEGER · read-write · mandatory Minute at which the time zone is changed from summer to winter time with respect to UTC. Example values from LibreNMS test devices
| |||||||||||||
| NwtWebioAn8GraphTimeServer | 1.3.6.1.4.1.5040.1.2.6.3.1.2.2 | ||||||||||||
| SwtWebioAn8GraphTimeServer1 | 1.3.6.1.4.1.5040.1.2.6.3.1.2.2.1 | OCTET STRING | RW | mandatory | <private> | ||||||||
scalar · OCTET STRING · read-write · mandatory IP address or name of the 1st time server in ASCII Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphTimeServer2 | 1.3.6.1.4.1.5040.1.2.6.3.1.2.2.2 | OCTET STRING | RW | mandatory | | ||||||||
scalar · OCTET STRING · read-write · mandatory IP address or name of the 2nd time server in ASCII Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphTsEnable | 1.3.6.1.4.1.5040.1.2.6.3.1.2.2.3 | OCTET STRING (SIZE (4)) | RW | mandatory | 00:00:00:01 | ||||||||
scalar · OCTET STRING (SIZE (4)) · read-write · mandatory Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Time Server Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphTsSyncTime | 1.3.6.1.4.1.5040.1.2.6.3.1.2.2.4 | INTEGER | RW | mandatory | 6 | ||||||||
scalar · INTEGER · read-write · mandatory Daily synchronisation time with the time server (hour: 0-23). Example values from LibreNMS test devices
| |||||||||||||
| NwtWebioAn8GraphDeviceClock | 1.3.6.1.4.1.5040.1.2.6.3.1.2.3 | ||||||||||||
| SwtWebioAn8GraphClockHrs | 1.3.6.1.4.1.5040.1.2.6.3.1.2.3.1 | INTEGER (0..23) | RW | mandatory | 22 | ||||||||
scalar · INTEGER (0..23) · read-write · mandatory Clock hours taking into account the time zone settings. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphClockMin | 1.3.6.1.4.1.5040.1.2.6.3.1.2.3.2 | INTEGER (0..59) | RW | mandatory | 18 | ||||||||
scalar · INTEGER (0..59) · read-write · mandatory Clock minutes taking into account the time zone settings. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphClockDay | 1.3.6.1.4.1.5040.1.2.6.3.1.2.3.3 | INTEGER (1..31) | RW | mandatory | 8 | ||||||||
scalar · INTEGER (1..31) · read-write · mandatory Date: Day of the month, taking into account the time zone settings. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphClockMonth | 1.3.6.1.4.1.5040.1.2.6.3.1.2.3.4 | INTEGER | RW | mandatory | wtWebioAn8GraphClockMonth-August(8) | ||||||||
scalar · INTEGER · read-write · mandatory Date: Month, taking into account the time zone settings.
Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphClockYear | 1.3.6.1.4.1.5040.1.2.6.3.1.2.3.5 | INTEGER (0..65535) | RW | mandatory | 2025 | ||||||||
scalar · INTEGER (0..65535) · read-write · mandatory Date: Year, taking into account the time zone settings. Example values from LibreNMS test devices
| |||||||||||||
| NwtWebioAn8GraphBasic | 1.3.6.1.4.1.5040.1.2.6.3.1.3 | ||||||||||||
| NwtWebioAn8GraphNetwork | 1.3.6.1.4.1.5040.1.2.6.3.1.3.1 | ||||||||||||
| SwtWebioAn8GraphIpAddress | 1.3.6.1.4.1.5040.1.2.6.3.1.3.1.1 | IpAddress | RW | mandatory | <private> | ||||||||
scalar · IpAddress · read-write · mandatory IP address of the Webio Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphSubnetMask | 1.3.6.1.4.1.5040.1.2.6.3.1.3.1.2 | IpAddress | RW | mandatory | <private> | ||||||||
scalar · IpAddress · read-write · mandatory Subnet mask of the Webio Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphGateway | 1.3.6.1.4.1.5040.1.2.6.3.1.3.1.3 | IpAddress | RW | mandatory | <private> | ||||||||
scalar · IpAddress · read-write · mandatory Gateway of the Webio Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphDnsServer1 | 1.3.6.1.4.1.5040.1.2.6.3.1.3.1.4 | OCTET STRING | RW | mandatory | <private> | ||||||||
scalar · OCTET STRING · read-write · mandatory IP address of the 1st DNS server in ASCII Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphDnsServer2 | 1.3.6.1.4.1.5040.1.2.6.3.1.3.1.5 | OCTET STRING | RW | mandatory | | ||||||||
scalar · OCTET STRING · read-write · mandatory IP address of the 2nd DNS server in ASCII Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphAddConfig | 1.3.6.1.4.1.5040.1.2.6.3.1.3.1.6 | OCTET STRING | RW | mandatory | 00:00:00:03 | ||||||||
scalar · OCTET STRING · read-write · mandatory Additional configuration (1=ON): Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: BOOTP disable Bit 1: DHCP disable Example values from LibreNMS test devices
| |||||||||||||
| NwtWebioAn8GraphHTTP | 1.3.6.1.4.1.5040.1.2.6.3.1.3.2 | ||||||||||||
| SwtWebioAn8GraphStartup | 1.3.6.1.4.1.5040.1.2.6.3.1.3.2.1 | OCTET STRING | RW | mandatory | 00:00:00:02 | ||||||||
scalar · OCTET STRING · read-write · mandatory Binary coded start page:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1: Index.htm
Bit 2: Home.htm
Bit 3: User.htm
Only one page may be selected at a time.Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphGetHeaderEnable | 1.3.6.1.4.1.5040.1.2.6.3.1.3.2.2 | OCTET STRING | RW | mandatory | 00:00:00:00 | ||||||||
scalar · OCTET STRING · read-write · mandatory If these bits are set, every answer of a short form GET question will be lead
by the IP-address and name of the device and/or a HTTP header:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-6: unused
Bit 1 : GET HTTP enable
Bit 0 : GET Header enableExample values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphHttpPort | 1.3.6.1.4.1.5040.1.2.6.3.1.3.2.3 | INTEGER (1..65535) | RW | mandatory | 80 | ||||||||
scalar · INTEGER (1..65535) · read-write · mandatory Definition of the standard HTML port (Default: 80). Example values from LibreNMS test devices
| |||||||||||||
| NwtWebioAn8GraphMail | 1.3.6.1.4.1.5040.1.2.6.3.1.3.3 | ||||||||||||
| SwtWebioAn8GraphMailAdName | 1.3.6.1.4.1.5040.1.2.6.3.1.3.3.1 | OCTET STRING | RW | mandatory | | ||||||||
scalar · OCTET STRING · read-write · mandatory Device name for mail administration. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphMailReply | 1.3.6.1.4.1.5040.1.2.6.3.1.3.3.2 | OCTET STRING | RW | mandatory | [email protected] | ||||||||
scalar · OCTET STRING · read-write · mandatory Reply address for the mail server. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphMailServer | 1.3.6.1.4.1.5040.1.2.6.3.1.3.3.3 | OCTET STRING | RW | mandatory | | ||||||||
scalar · OCTET STRING · read-write · mandatory Name or IP address of the mail server. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn1MailEnable | 1.3.6.1.4.1.5040.1.2.6.3.1.3.3.4 | OCTET STRING | RW | mandatory | 00:00:00:00 | ||||||||
scalar · OCTET STRING · read-write · mandatory Set this bit to enable the sending of mails:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Mail enableExample values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphMailAuthentication | 1.3.6.1.4.1.5040.1.2.6.3.1.3.3.5 | OCTET STRING (SIZE (4)) | RW | mandatory | |||||||||
scalar · OCTET STRING (SIZE (4)) · read-write · mandatory Selection of the authentication modi: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : POP3 before SMTP Bit 1 : ESMTP, authentication Bit 0 : SMTP, no authentication | |||||||||||||
| SwtWebioAn8GraphMailAuthUser | 1.3.6.1.4.1.5040.1.2.6.3.1.3.3.6 | OCTET STRING | RW | mandatory | |||||||||
scalar · OCTET STRING · read-write · mandatory Name of the user to be authenticated. | |||||||||||||
| SwtWebioAn8GraphMailAuthPassword | 1.3.6.1.4.1.5040.1.2.6.3.1.3.3.7 | OCTET STRING | RW | mandatory | |||||||||
scalar · OCTET STRING · read-write · mandatory Authentication password. | |||||||||||||
| SwtWebioAn8GraphMailPop3Server | 1.3.6.1.4.1.5040.1.2.6.3.1.3.3.8 | OCTET STRING | RW | mandatory | |||||||||
scalar · OCTET STRING · read-write · mandatory Name or Ip-address of the POP3 Servers. | |||||||||||||
| NwtWebioAn8GraphSNMP | 1.3.6.1.4.1.5040.1.2.6.3.1.3.4 | ||||||||||||
| SwtWebioAn8GraphSnmpCommunityStringRead | 1.3.6.1.4.1.5040.1.2.6.3.1.3.4.1 | OCTET STRING | RW | mandatory | public | ||||||||
scalar · OCTET STRING · read-write · mandatory Community string read only Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphSnmpCommunityStringReadWrite | 1.3.6.1.4.1.5040.1.2.6.3.1.3.4.2 | OCTET STRING | RW | mandatory | public | ||||||||
scalar · OCTET STRING · read-write · mandatory Community string read / write Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphSystemTrapManagerIP | 1.3.6.1.4.1.5040.1.2.6.3.1.3.4.3 | OCTET STRING | RW | mandatory | | ||||||||
scalar · OCTET STRING · read-write · mandatory Name or IP address of the TCP server which accepts the system trap. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphSystemTrapEnable | 1.3.6.1.4.1.5040.1.2.6.3.1.3.4.4 | OCTET STRING (SIZE (4)) | RW | mandatory | 00:00:00:00 | ||||||||
scalar · OCTET STRING (SIZE (4)) · read-write · mandatory Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2-7: unused Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphSnmpEnable | 1.3.6.1.4.1.5040.1.2.6.3.1.3.4.5 | OCTET STRING | RW | mandatory | 00:00:00:01 | ||||||||
scalar · OCTET STRING · read-write · mandatory Set bit 0 to enable SNMP. If disabled, the device did not respond to any SNMP requests. Bit 1 decided wether the community string of read operations is compared with the system password or not: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : SNMP enable Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphSnmpCommunityStringTrap | 1.3.6.1.4.1.5040.1.2.6.3.1.3.4.6 | OCTET STRING | RW | mandatory | public | ||||||||
scalar · OCTET STRING · read-write · mandatory Community string send within traps. Example values from LibreNMS test devices
| |||||||||||||
| NwtWebioAn8GraphUDP | 1.3.6.1.4.1.5040.1.2.6.3.1.3.5 | ||||||||||||
| SwtWebioAn8GraphUdpPort | 1.3.6.1.4.1.5040.1.2.6.3.1.3.5.1 | INTEGER (1..65535) | RW | mandatory | -23257 | ||||||||
scalar · INTEGER (1..65535) · read-write · mandatory Udp port to which the Udp queries ( short form GET requests) can be sent. This port number must be unique within the device. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphUdpEnable | 1.3.6.1.4.1.5040.1.2.6.3.1.3.5.2 | OCTET STRING | RW | mandatory | 00:00:00:00 | ||||||||
scalar · OCTET STRING · read-write · mandatory Set this bit to enable UDP support:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : UDP enableExample values from LibreNMS test devices
| |||||||||||||
| NwtWebioAn8GraphSyslog | 1.3.6.1.4.1.5040.1.2.6.3.1.3.6 | ||||||||||||
| SwtWebioAn8GraphSyslogServerIP | 1.3.6.1.4.1.5040.1.2.6.3.1.3.6.1 | OCTET STRING | RW | mandatory | | ||||||||
scalar · OCTET STRING · read-write · mandatory Name or IP address of the Syslog server, which accepts the Syslog messgaes. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphSyslogServerPort | 1.3.6.1.4.1.5040.1.2.6.3.1.3.6.2 | INTEGER | RW | mandatory | 514 | ||||||||
scalar · INTEGER · read-write · mandatory Portnumber of the Syslog servers, default 514. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphSyslogSystemMessagesEnable | 1.3.6.1.4.1.5040.1.2.6.3.1.3.6.3 | OCTET STRING (SIZE (4)) | RW | mandatory | 00:00:00:00 | ||||||||
scalar · OCTET STRING (SIZE (4)) · read-write · mandatory Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2: Diag Messages Bit 3-7: unused Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphSyslogEnable | 1.3.6.1.4.1.5040.1.2.6.3.1.3.6.4 | OCTET STRING | RW | mandatory | 00:00:00:00 | ||||||||
scalar · OCTET STRING · read-write · mandatory Set bit 0 to enable Syslog:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Syslog enableExample values from LibreNMS test devices
| |||||||||||||
| NwtWebioAn8GraphFTP | 1.3.6.1.4.1.5040.1.2.6.3.1.3.7 | ||||||||||||
| SwtWebioAn8GraphFTPServerIP | 1.3.6.1.4.1.5040.1.2.6.3.1.3.7.1 | OCTET STRING | RW | mandatory | | ||||||||
scalar · OCTET STRING · read-write · mandatory Name or IP address of the FTP server, which accepts the FTP messages. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphFTPServerControlPort | 1.3.6.1.4.1.5040.1.2.6.3.1.3.7.2 | INTEGER | RW | mandatory | 21 | ||||||||
scalar · INTEGER · read-write · mandatory Portnumber of the control port of the FTP server, default 21. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphFTPUserName | 1.3.6.1.4.1.5040.1.2.6.3.1.3.7.3 | OCTET STRING | RW | mandatory | | ||||||||
scalar · OCTET STRING · read-write · mandatory FTP Loggin: user name. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphFTPPassword | 1.3.6.1.4.1.5040.1.2.6.3.1.3.7.4 | OCTET STRING | RW | mandatory | | ||||||||
scalar · OCTET STRING · read-write · mandatory FTP Loggin: user password. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphFTPAccount | 1.3.6.1.4.1.5040.1.2.6.3.1.3.7.5 | OCTET STRING | RW | mandatory | | ||||||||
scalar · OCTET STRING · read-write · mandatory FTP Loggin: name of account. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphFTPOption | 1.3.6.1.4.1.5040.1.2.6.3.1.3.7.6 | OCTET STRING | RW | mandatory | 00:00:00:01 | ||||||||
scalar · OCTET STRING · read-write · mandatory Bit 0 switches the FTP Server in Passiv-Mode,
the Client controls the data connection on its own:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : PASV enableExample values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphFTPEnable | 1.3.6.1.4.1.5040.1.2.6.3.1.3.7.7 | OCTET STRING | RW | mandatory | 00:00:00:00 | ||||||||
scalar · OCTET STRING · read-write · mandatory Set Bit 0 to enable FTP:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : FTP enableExample values from LibreNMS test devices
| |||||||||||||
| NwtWebioAn8GraphDatalogger | 1.3.6.1.4.1.5040.1.2.6.3.1.4 | ||||||||||||
| SwtWebioAn8GraphLoggerTimebase | 1.3.6.1.4.1.5040.1.2.6.3.1.4.1 | INTEGER | RW | mandatory | wtWebioAn8GraphDatalogger-1Min(1) | ||||||||
scalar · INTEGER · read-write · mandatory Time base of the data logger
Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphLoggerSensorSel | 1.3.6.1.4.1.5040.1.2.6.3.1.4.2 | OCTET STRING (SIZE (4)) | RW | mandatory | 00:00:00:05 | ||||||||
scalar · OCTET STRING (SIZE (4)) · read-write · mandatory Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3: Sensor 4 Bit 4: Sensor 5 Bit 5: Sensor 6 Bit 6: Sensor 7 Bit 7: Sensor 8 Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphDisplaySensorSel | 1.3.6.1.4.1.5040.1.2.6.3.1.4.3 | OCTET STRING (SIZE (4)) | RW | mandatory | |||||||||
scalar · OCTET STRING (SIZE (4)) · read-write · mandatory Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3: Sensor 4 Bit 4: Sensor 5 Bit 5: Sensor 6 Bit 6: Sensor 7 Bit 7: Sensor 8 | |||||||||||||
| TwtWebioAn8GraphSensorColorTable defined twice | 1.3.6.1.4.1.5040.1.2.6.3.1.4.4 | NA | mandatory | ||||||||||
table · not-accessible · mandatory List of sensor colors for the praphical presentation. | |||||||||||||
| RwtWebioAn8GraphSensorColorEntry defined twice | 1.3.6.1.4.1.5040.1.2.6.3.1.4.4.1 | NA | mandatory | ||||||||||
| CwtWebioAn8GraphGraphicsSensorColor | 1.3.6.1.4.1.5040.1.2.6.3.1.4.4.1.1 | OCTET STRING (SIZE (3)) | RW | mandatory | |||||||||
column · OCTET STRING (SIZE (3)) · read-write · mandatory Color of the sensors at the praphical presention. | |||||||||||||
| CwtWebioAn8GraphSensorColor | 1.3.6.1.4.1.5040.1.2.6.3.1.4.4.1.1 | OCTET STRING (SIZE (3)) | RW | mandatory | |||||||||
column · OCTET STRING (SIZE (3)) · read-write · mandatory Color of the sensors at the praphical presention. | |||||||||||||
| CwtWebioAn8GraphGraphicsSelectScale | 1.3.6.1.4.1.5040.1.2.6.3.1.4.4.1.2 | OCTET STRING | RW | mandatory | |||||||||
column · OCTET STRING · read-write · mandatory Assignes one of 4 scales to a sensor:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Use Scale 1
Bit 1 : Use Scale 2
Bit 2 : Use Scale 3
Bit 3 : Use Scale 4
Bit 4-7: unused | |||||||||||||
| RwtWebioAn8GraphSensorColorEntry defined twice | 1.3.6.1.4.1.5040.1.2.6.3.1.4.4.1 | NA | mandatory | ||||||||||
| SwtWebioAn8GraphAutoScaleEnable | 1.3.6.1.4.1.5040.1.2.6.3.1.4.5 | OCTET STRING | RW | mandatory | |||||||||
scalar · OCTET STRING · read-write · mandatory If bit 0 is set, vertical auto scale is enabled:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 1-7: unused
Bit 0 : Auto Scale enable | |||||||||||||
| SwtWebioAn8GraphVerticalUpperLimit | 1.3.6.1.4.1.5040.1.2.6.3.1.4.6 | OCTET STRING | RW | mandatory | |||||||||
scalar · OCTET STRING · read-write · mandatory This value defines the maximum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal places. | |||||||||||||
| SwtWebioAn8GraphVerticalLowerLimit | 1.3.6.1.4.1.5040.1.2.6.3.1.4.7 | OCTET STRING | RW | mandatory | |||||||||
scalar · OCTET STRING · read-write · mandatory This value defines the minimum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal places. | |||||||||||||
| SwtWebioAn8GraphHorizontalZoom | 1.3.6.1.4.1.5040.1.2.6.3.1.4.8 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Defines the default zoom stage, if no auto scaling is selected.
| |||||||||||||
| NwtWebioAn8GraphAlarm | 1.3.6.1.4.1.5040.1.2.6.3.1.5 | ||||||||||||
| SwtWebioAn8GraphAlarmCount | 1.3.6.1.4.1.5040.1.2.6.3.1.5.1 | INTEGER (1..8) | RO | mandatory | 8 | ||||||||
scalar · INTEGER (1..8) · read-only · mandatory Number of independent alarms. Example values from LibreNMS test devices
| |||||||||||||
| TwtWebioAn8GraphAlarmIfTable | 1.3.6.1.4.1.5040.1.2.6.3.1.5.2 | NA | mandatory | ||||||||||
table · not-accessible · mandatory List of alarm indices. | |||||||||||||
| RwtWebioAn8GraphAlarmIfEntry | 1.3.6.1.4.1.5040.1.2.6.3.1.5.2.1 | NA | mandatory | ||||||||||
| CwtWebioAn8GraphAlarmNo | 1.3.6.1.4.1.5040.1.2.6.3.1.5.2.1.1 | INTEGER (1..8) | RO | mandatory | 1 | ||||||||
| TwtWebioAn8GraphAlarmTable | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3 | NA | mandatory | ||||||||||
table · not-accessible · mandatory List of settings depending on the alarm number. | |||||||||||||
| RwtWebioAn8GraphAlarmEntry | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Alarm parameters of the individual alarms. | |||||||||||||
| CwtWebioAn8GraphAlarmTrigger | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.1 | OCTET STRING (SIZE (4)) | RW | mandatory | 00:00:00:00 | ||||||||
column · OCTET STRING (SIZE (4)) · read-write · mandatory Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3: Sensor 4 Bit 4: Sensor 5 Bit 5: Sensor 6 Bit 6: Sensor 7 Bit 7: Sensor 8 Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmMin | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.2 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory Minimum temperature in degrees with maximum 2 decimal places. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmMax | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.3 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory Maximum temperature in degrees with maximum 2 decimal places. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmHysteresis | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.4 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) , in degrees with maximum 2 decimal places. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmDelay | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.5 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes). Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmInterval | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.6 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory Send interval for alarm messages. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmEnable | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.7 | OCTET STRING (SIZE (4)) | RW | mandatory | 00:00:00:00 | ||||||||
column · OCTET STRING (SIZE (4)) · read-write · mandatory Binary coded alarm enable:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Mail Enable
Bit 1: SNMP Trap enable
Bit 2: TCP Client enableExample values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmEMailAddr | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.8 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory E-Mail address for sending the alarm mail to. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmMailSubject | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.9 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory Subject line for alarm mail. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmMailText | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.10 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory Alarm mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmManagerIP | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.11 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory Name or IP address of the SNMP Manager which accepts the trap. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmTrapText | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.12 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory This text is sent in the trap body. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmMailOptions | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.13 | OCTET STRING (SIZE (4)) | RW | mandatory | 00:00:00:00 | ||||||||
column · OCTET STRING (SIZE (4)) · read-write · mandatory Binary coded options:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Attach Thermo.csv Enable
Bit 1 : CSV-Data_since_last_report
Bit 2-7: unusedExample values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmTcpIpAddr | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.14 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory Name or IP address of the TCP server which accepts the trap. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmTcpPort | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.15 | INTEGER (1..65535) | RW | mandatory | 0 | ||||||||
column · INTEGER (1..65535) · read-write · mandatory Port number of the TCP server which accepts the trap. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmTcpText | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.16 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory This text is sent in the TCP trap body. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmClearMailSubject | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.17 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory Subject line for alarm clear mail. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmClearMailText | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.18 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory Alarm clear mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmClearTrapText | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.19 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory This text is sent in the trap body. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmClearTcpText | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.20 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory This text is sent in the TCP trap body. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmSyslogIpAddr | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.21 | IpAddress | RW | mandatory | | ||||||||
column · IpAddress · read-write · mandatory IP address of the syslog server to which the Webio device should send syslog messages. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmSyslogPort | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.22 | INTEGER (1..65535) | RW | mandatory | 0 | ||||||||
column · INTEGER (1..65535) · read-write · mandatory Port number of the syslog server to which the Webio device should send syslog messages. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmSyslogText | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.23 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphAlarmSyslogClearText | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.24 | OCTET STRING | RW | mandatory | | ||||||||
scalar · OCTET STRING · read-write · mandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmFtpDataPort | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.25 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory Local data port: 1..65535 or AUTO: the next free port will be assigned. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmFtpFileName | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.26 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory Name of the file including path informations. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmFtpText | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.27 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory Message text to store on the FTP server. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmFtpClearText | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.28 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory Alarm clear message to store on the FTP server. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphAlarmFtpOptions | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.29 | OCTET STRING (SIZE (4)) | RW | mandatory | 00:00:00:02 | ||||||||
scalar · OCTET STRING (SIZE (4)) · read-write · mandatory Binary coded options, select only one option at the same time:
STORE = replace file
APPEND = append message at the end of the file
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : STORE
Bit 1 : APPEND
Bit 2-7: unusedExample values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphAlarmTimerCron | 1.3.6.1.4.1.5040.1.2.6.3.1.5.3.1.30 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory This entry contains 5 text fields space or tab seperated for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Range 0-59 2. Hours Range 0-23, 0 is midnight 3: Day of month Range 1-31 4: Month Range 1-12 5: Weekday Range 0-6, 0 is sunday Syntax for every field: - an asterix (*) enables every possible setting of a field - single numbers seperated by commas - a partition within the allowed range (1-5) - step size within an partition of the allowed range (0-59/2: every second minute). Example values from LibreNMS test devices
| |||||||||||||
| NwtWebioAn8GraphGraphics | 1.3.6.1.4.1.5040.1.2.6.3.1.6 | ||||||||||||
| NwtWebioAn8GraphGraphicsBase | 1.3.6.1.4.1.5040.1.2.6.3.1.6.1 | ||||||||||||
| SwtWebioAn8GraphGraphicsBaseEnable | 1.3.6.1.4.1.5040.1.2.6.3.1.6.1.1 | OCTET STRING | RW | mandatory | 00:00:00:0f | ||||||||
scalar · OCTET STRING · read-write · mandatory Defines the viewing options of the graphic:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Auto scroll enable
Bit 1 : Show table
Bit 2 : Show graph
Bit 3 : Show control buttons
Bit 4 : Show config menu
Bit 5-7: unusedExample values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphGraphicsBaseWidth | 1.3.6.1.4.1.5040.1.2.6.3.1.6.1.2 | INTEGER | RW | mandatory | 500 | ||||||||
scalar · INTEGER · read-write · mandatory Defines the width of the graphic in pixels. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphGraphicsBaseHeight | 1.3.6.1.4.1.5040.1.2.6.3.1.6.1.3 | INTEGER | RW | mandatory | 450 | ||||||||
scalar · INTEGER · read-write · mandatory Defines the height of the graphic in pixels. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphGraphicsBaseFrameColor | 1.3.6.1.4.1.5040.1.2.6.3.1.6.1.4 | OCTET STRING (SIZE (3)) | RW | mandatory | D6E8FF | ||||||||
scalar · OCTET STRING (SIZE (3)) · read-write · mandatory Frame color definition in RGB. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphGraphicsBaseBackgroundColor | 1.3.6.1.4.1.5040.1.2.6.3.1.6.1.5 | OCTET STRING (SIZE (3)) | RW | mandatory | FFFFFF | ||||||||
scalar · OCTET STRING (SIZE (3)) · read-write · mandatory Background color definition in RGB. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphGraphicsBasePollingrate | 1.3.6.1.4.1.5040.1.2.6.3.1.6.1.6 | INTEGER | RW | mandatory | 15 | ||||||||
scalar · INTEGER · read-write · mandatory Defines the pollingrate in seconds, which defines the refreshing intervall of the graphic. Example values from LibreNMS test devices
| |||||||||||||
| NwtWebioAn8GraphGraphicsSelect | 1.3.6.1.4.1.5040.1.2.6.3.1.6.2 | ||||||||||||
| SwtWebioAn8GraphGraphicsSelectDisplaySensorSel | 1.3.6.1.4.1.5040.1.2.6.3.1.6.2.1 | OCTET STRING (SIZE (4)) | RW | mandatory | 00:00:00:ff | ||||||||
scalar · OCTET STRING (SIZE (4)) · read-write · mandatory Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3: Sensor 4 Bit 4: Sensor 5 Bit 5: Sensor 6 Bit 6: Sensor 7 Bit 7: Sensor 8 Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphGraphicsSelectDisplayShowExtrem | 1.3.6.1.4.1.5040.1.2.6.3.1.6.2.2 | OCTET STRING (SIZE (4)) | RW | mandatory | 00:00:00:00 | ||||||||
scalar · OCTET STRING (SIZE (4)) · read-write · mandatory Binary coded sensor selection: only selected sensors will be shown with minima and maxima: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3: Sensor 4 Bit 4: Sensor 5 Bit 5: Sensor 6 Bit 6: Sensor 7 Bit 7: Sensor 8 Example values from LibreNMS test devices
| |||||||||||||
| TwtWebioAn8GraphSensorColorTable defined twice | 1.3.6.1.4.1.5040.1.2.6.3.1.6.2.3 | NA | mandatory | ||||||||||
table · not-accessible · mandatory List of sensor colors for the praphical presentation. | |||||||||||||
| NwtWebioAn8GraphGraphicsScale | 1.3.6.1.4.1.5040.1.2.6.3.1.6.3 | ||||||||||||
| SwtWebioAn8GraphGraphicsScaleAutoScaleEnable | 1.3.6.1.4.1.5040.1.2.6.3.1.6.3.1 | OCTET STRING | RW | mandatory | 00:00:00:02 | ||||||||
scalar · OCTET STRING · read-write · mandatory Select the Auto Scale Mode:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Scale 1 Auto scale enable
Bit 1 : Scale 2 Auto scale enable
Bit 2 : Scale 3 Auto scale enable
Bit 3 : Scale 4 Auto scale enable
Bit 4-7: unusedExample values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphGraphicsScaleAutoFitEnable | 1.3.6.1.4.1.5040.1.2.6.3.1.6.3.2 | OCTET STRING | RW | mandatory | 00:00:00:0d | ||||||||
scalar · OCTET STRING · read-write · mandatory Select the Auto Fit Mode::
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Scale 1 Auto fit enable
Bit 1 : Scale 2 Auto fit enable
Bit 2 : Scale 3 Auto fit enable
Bit 3 : Scale 4 Auto fit enable
Bit 4-7: unusedExample values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphGraphicsScale1Min | 1.3.6.1.4.1.5040.1.2.6.3.1.6.3.3 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory Scale 1: Minimum. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphGraphicsScale2Min | 1.3.6.1.4.1.5040.1.2.6.3.1.6.3.4 | INTEGER | RO | mandatory | -10 | ||||||||
scalar · INTEGER · read-only · mandatory Scale 2: Minimum. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphGraphicsScale3Min | 1.3.6.1.4.1.5040.1.2.6.3.1.6.3.5 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Scale 3: Minimum. | |||||||||||||
| SwtWebioAn8GraphGraphicsScale4Min | 1.3.6.1.4.1.5040.1.2.6.3.1.6.3.6 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Scale 4: Minimum. | |||||||||||||
| SwtWebioAn8GraphGraphicsScale1Max | 1.3.6.1.4.1.5040.1.2.6.3.1.6.3.7 | INTEGER | RO | mandatory | 40 | ||||||||
scalar · INTEGER · read-only · mandatory Scale 1: Maximum. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphGraphicsScale2Max | 1.3.6.1.4.1.5040.1.2.6.3.1.6.3.8 | INTEGER | RO | mandatory | 40 | ||||||||
scalar · INTEGER · read-only · mandatory Scale 2: Maximum. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphGraphicsScale3Max | 1.3.6.1.4.1.5040.1.2.6.3.1.6.3.9 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Scale 3: Maximum. | |||||||||||||
| SwtWebioAn8GraphGraphicsScale4Max | 1.3.6.1.4.1.5040.1.2.6.3.1.6.3.10 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Scale 4: Maximum. | |||||||||||||
| SwtWebioAn8GraphGraphicsScale1Unit | 1.3.6.1.4.1.5040.1.2.6.3.1.6.3.11 | OCTET STRING | RO | mandatory | b0:43 | ||||||||
scalar · OCTET STRING · read-only · mandatory Scale 1: Unit. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphGraphicsScale2Unit | 1.3.6.1.4.1.5040.1.2.6.3.1.6.3.12 | OCTET STRING | RO | mandatory | b0:43 | ||||||||
scalar · OCTET STRING · read-only · mandatory Scale 2: Unit. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphGraphicsScale3Unit | 1.3.6.1.4.1.5040.1.2.6.3.1.6.3.13 | OCTET STRING | RO | mandatory | |||||||||
scalar · OCTET STRING · read-only · mandatory Scale 3: Unit. | |||||||||||||
| SwtWebioAn8GraphGraphicsScale4Unit | 1.3.6.1.4.1.5040.1.2.6.3.1.6.3.14 | OCTET STRING | RO | mandatory | |||||||||
scalar · OCTET STRING · read-only · mandatory Scale 4: Unit. | |||||||||||||
| NwtWebioAn8GraphPorts | 1.3.6.1.4.1.5040.1.2.6.3.2 | ||||||||||||
| TwtWebioAn8GraphPortTable | 1.3.6.1.4.1.5040.1.2.6.3.2.1 | NA | mandatory | ||||||||||
table · not-accessible · mandatory List of settings depending on the sensor number. | |||||||||||||
| RwtWebioAn8GraphPortEntry | 1.3.6.1.4.1.5040.1.2.6.3.2.1.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Sensor parameters for the individual sensors. | |||||||||||||
| CwtWebioAn8GraphPortName | 1.3.6.1.4.1.5040.1.2.6.3.2.1.1.1 | OCTET STRING | RW | mandatory | Inside RACK | ||||||||
| CwtWebioAn8GraphPortText | 1.3.6.1.4.1.5040.1.2.6.3.2.1.1.2 | OCTET STRING | RW | mandatory | Inside RACK | ||||||||
| CwtWebioAn8GraphPortOffset1 | 1.3.6.1.4.1.5040.1.2.6.3.2.1.1.3 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 1. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphPortTemperature1 | 1.3.6.1.4.1.5040.1.2.6.3.2.1.1.4 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphPortOffset2 | 1.3.6.1.4.1.5040.1.2.6.3.2.1.1.5 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 2. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphPortTemperature2 | 1.3.6.1.4.1.5040.1.2.6.3.2.1.1.6 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphPortComment | 1.3.6.1.4.1.5040.1.2.6.3.2.1.1.7 | OCTET STRING | RW | mandatory | | ||||||||
column · OCTET STRING · read-write · mandatory Offset calibration: informations of date, name of operator, reference devices. Example values from LibreNMS test devices
| |||||||||||||
| CwtWebioAn8GraphPortSensorSelect | 1.3.6.1.4.1.5040.1.2.6.3.2.1.1.8 | OCTET STRING (SIZE (4)) | RW | mandatory | 00:00:00:01 | ||||||||
column · OCTET STRING (SIZE (4)) · read-write · mandatory Binär kodierte Optionen für Sensor:
Octet 1: ungenutzt
Octet 2: ungenutzt
Octet 3: ungenutzt
Octet 4:
Bit 0 : PT100
Bit 1 : PT1000 (default)
Bit 2-7: ungenutztExample values from LibreNMS test devices
| |||||||||||||
| NwtWebioAn8GraphManufact | 1.3.6.1.4.1.5040.1.2.6.3.3 | ||||||||||||
| SwtWebioAn8GraphMfName | 1.3.6.1.4.1.5040.1.2.6.3.3.1 | OCTET STRING | RW | mandatory | <private> | ||||||||
scalar · OCTET STRING · read-write · mandatory Manufacturer company name Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphMfAddr | 1.3.6.1.4.1.5040.1.2.6.3.3.2 | OCTET STRING | RW | mandatory | | ||||||||
scalar · OCTET STRING · read-write · mandatory Manufacturer address. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphMfHotline | 1.3.6.1.4.1.5040.1.2.6.3.3.3 | OCTET STRING | RW | mandatory | | ||||||||
scalar · OCTET STRING · read-write · mandatory Manufacturer hotline. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphMfInternet | 1.3.6.1.4.1.5040.1.2.6.3.3.4 | OCTET STRING | RW | mandatory | <private> | ||||||||
scalar · OCTET STRING · read-write · mandatory Manufacturer Internet address. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphMfDeviceTyp | 1.3.6.1.4.1.5040.1.2.6.3.3.5 | OCTET STRING | RW | mandatory | Web-Thermograph | ||||||||
scalar · OCTET STRING · read-write · mandatory Manufacturer device name (model number). Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphMfOrderNo | 1.3.6.1.4.1.5040.1.2.6.3.3.6 | OCTET STRING | RW | mandatory | |||||||||
scalar · OCTET STRING · read-write · mandatory Manufacturer part number. | |||||||||||||
| NwtWebioAn8GraphDiag | 1.3.6.1.4.1.5040.1.2.6.4 | ||||||||||||
| SwtWebioAn8GraphDiagErrorCount | 1.3.6.1.4.1.5040.1.2.6.4.1 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory Number of entries in the error memory. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphDiagBinaryError | 1.3.6.1.4.1.5040.1.2.6.4.2 | OCTET STRING | RO | mandatory | 00:00:00:00:00:00:00:00:00:00:00:00 | ||||||||
scalar · OCTET STRING · read-only · mandatory Error causes coded bit-by-bit. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphDiagErrorIndex | 1.3.6.1.4.1.5040.1.2.6.4.3 | INTEGER | RW | mandatory | 0 | ||||||||
scalar · INTEGER · read-write · mandatory The value of this variable is used as an index to read an error massege from wtWebioAn8GraphDiagErrorMessage. Errors are numbered from 1 to wtWebioAn8GraphDiagErrorCount. Writing a valid value into this variable, making the appropriate message readable from wtWebioAn8GraphDiagErrorMessage. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphDiagErrorMessage | 1.3.6.1.4.1.5040.1.2.6.4.4 | OCTET STRING | RO | mandatory | Device status: OK | ||||||||
scalar · OCTET STRING · read-only · mandatory Using wtWebioAn8GraphDiagErrorIndex as an index, the appropriate message is available. Example values from LibreNMS test devices
| |||||||||||||
| SwtWebioAn8GraphDiagErrorClear | 1.3.6.1.4.1.5040.1.2.6.4.5 | INTEGER | WO | mandatory | 0
End of MIB | ||||||||
scalar · INTEGER · write-only · mandatory Writing 1 into this variable clears all diagnosis messages. Example values from LibreNMS test devices
| |||||||||||||
Traps / Notifications
- wtWebioAn8GraphAlert1
1.3.6.1.4.1.5040.1.2.6.0.11 - wtWebioAn8GraphAlert10
1.3.6.1.4.1.5040.1.2.6.0.72 - wtWebioAn8GraphAlert11
1.3.6.1.4.1.5040.1.2.6.0.73 - wtWebioAn8GraphAlert12
1.3.6.1.4.1.5040.1.2.6.0.74 - wtWebioAn8GraphAlert13
1.3.6.1.4.1.5040.1.2.6.0.75 - wtWebioAn8GraphAlert14
1.3.6.1.4.1.5040.1.2.6.0.76 - wtWebioAn8GraphAlert15
1.3.6.1.4.1.5040.1.2.6.0.77 - wtWebioAn8GraphAlert16
1.3.6.1.4.1.5040.1.2.6.0.78 - wtWebioAn8GraphAlert2
1.3.6.1.4.1.5040.1.2.6.0.12 - wtWebioAn8GraphAlert3
1.3.6.1.4.1.5040.1.2.6.0.13 - wtWebioAn8GraphAlert4
1.3.6.1.4.1.5040.1.2.6.0.14 - wtWebioAn8GraphAlert5
1.3.6.1.4.1.5040.1.2.6.0.15 - wtWebioAn8GraphAlert6
1.3.6.1.4.1.5040.1.2.6.0.16 - wtWebioAn8GraphAlert7
1.3.6.1.4.1.5040.1.2.6.0.17 - wtWebioAn8GraphAlert8
1.3.6.1.4.1.5040.1.2.6.0.18 - wtWebioAn8GraphAlert9
1.3.6.1.4.1.5040.1.2.6.0.71 - wtWebioAn8GraphAlertDiag
1.3.6.1.4.1.5040.1.2.6.0.110