WATCHGUARD-IPSEC-SA-MON-MIB-EXT
WatchGuard Technologies Inc.The MIB module describes generic IPSec objects defined in IETF working draft 'draft-ieft-ipsec-monitor-mib-01' and WatchGuard's extension.
snmptranslate -m WATCHGUARD-IPSEC-SA-MON-MIB-EXT -Tpsnmpwalk -v2c -c <community> -m WATCHGUARD-IPSEC-SA-MON-MIB-EXT <host> 1.3.6.1.4.1.3097.3Imports
| IF-MIB | ifIndex |
|---|---|
| IPSEC-ISAKMP-IKE-DOI-TC | IpsecDoiAhTransform, IpsecDoiAuthAlgorithm, IpsecDoiEncapsulationMode, IpsecDoiEspTransform, IpsecDoiIdentType, IpsecDoiIpcompTransform, IpsecDoiSecProtocolId |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
| WATCHGUARD-SMI | watchguard |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IwgIpsecSaMonModule | 1.3.6.1.4.1.3097.3 | |||
identity The MIB module describes generic IPSec objects defined in IETF working draft 'draft-ieft-ipsec-monitor-mib-01' and WatchGuard's extension. | ||||
| NwgIpsecSaMonitorMIB | 1.3.6.1.4.1.3097.3.1 | |||
node · current This is the base object identifier for all IPSec branches. | ||||
| NwgSaTables | 1.3.6.1.4.1.3097.3.1.1 | |||
node · current This is the base object identifier for all SA tables. | ||||
| TwgIpsecSaEspInTable | 1.3.6.1.4.1.3097.3.1.1.1 | NA | ||
table · not-accessible · current The (conceptual) table containing information on IPSec inbound ESP SAs. There should be one row for every inbound ESP security association that exists in the entity. The maximum number of rows is implementation dependent. | ||||
| RwgIpsecSaEspInEntry | 1.3.6.1.4.1.3097.3.1.1.1.1 | NA | ||
row · not-accessible · current An entry (conceptual row) containing the information on a particular IPSec inbound ESP SA. A row in this table cannot be created or deleted by SNMP operations on columns of the table. | ||||
| CwgIpsecSaEspInAddress | 1.3.6.1.4.1.3097.3.1.1.1.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The destination address of the SA. For implementations that do not support IPv6, this address should appear as one of the IPv4-mapped IPv6 addresses as defined in Section 2.5.4 of [IPV6AA]. Specifically, the prefix '0000:0000:0000:0000:0000:FFFF:' is used for IPv4 only nodes, while the prefix '0000:0000:0000:0000:0000:0000:' is used for bi-lingual nodes. | ||||
| CwgIpsecSaEspInSpi | 1.3.6.1.4.1.3097.3.1.1.1.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The security parameters index of the SA. | ||||
| CwgIpsecSaEspInDestId | 1.3.6.1.4.1.3097.3.1.1.1.1.3 | OCTET STRING (SIZE (1..255)) | RO | |
column · OCTET STRING (SIZE (1..255)) · read-only · current The destination identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation. This value is taken directly from the optional ID payloads that are exchanged during SA creation negotiation. | ||||
| CwgIpsecSaEspInDestIdType | 1.3.6.1.4.1.3097.3.1.1.1.1.4 | IpsecDoiIdentType | RO | |
column · IpsecDoiIdentType · read-only · current The type of identifier presented by 'wgIpsecSaEspInDestId', or 0 if unknown or if the SA uses transport mode encapsulation. | ||||
| CwgIpsecSaEspInSourceId | 1.3.6.1.4.1.3097.3.1.1.1.1.5 | OCTET STRING (SIZE (1..255)) | RO | |
column · OCTET STRING (SIZE (1..255)) · read-only · current The source identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation. This value is taken directly from the optional ID payloads that are exchange during SA creation negotiation. | ||||
| CwgIpsecSaEspInSourceIdType | 1.3.6.1.4.1.3097.3.1.1.1.1.6 | IpsecDoiIdentType | RO | |
column · IpsecDoiIdentType · read-only · current The type of identifier presented by 'wgIpsecSaEspInSourceId', or 0 if unknown or if the SA uses transport mode encapsulation. | ||||
| CwgIpsecSaEspInProtocol | 1.3.6.1.4.1.3097.3.1.1.1.1.7 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current The transport-layer protocol number that this SA carries, or 0 if it carries any protocol. | ||||
| CwgIpsecSaEspInDestPort | 1.3.6.1.4.1.3097.3.1.1.1.1.8 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The destination port number of the protocol that this SA carries, or 0 if it carries any port number. | ||||
| CwgIpsecSaEspInSourcePort | 1.3.6.1.4.1.3097.3.1.1.1.1.9 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The source port number of the protocol that this SA carries, or 0 if it carries any port number. | ||||
| CwgIpsecSaEspInCreator | 1.3.6.1.4.1.3097.3.1.1.1.1.10 | IpsecSaCreatorIdent | RO | |
column · IpsecSaCreatorIdent · read-only · current The creator of this SA. This MIB makes no assumptions about how the SAs are created. They may be created statically, or by a key exchange protocol such as IKE, or by some other method. | ||||
| CwgIpsecSaEspInEncapsulation | 1.3.6.1.4.1.3097.3.1.1.1.1.11 | IpsecDoiEncapsulationMode | RO | |
column · IpsecDoiEncapsulationMode · read-only · current The type of encapsulation used by this SA. | ||||
| CwgIpsecSaEspInEncAlg | 1.3.6.1.4.1.3097.3.1.1.1.1.12 | IpsecDoiEspTransform | RO | |
column · IpsecDoiEspTransform · read-only · current A unique value representing the encryption algorithm applied to traffic or 0 if there is no encryption used. | ||||
| CwgIpsecSaEspInEncKeyLength | 1.3.6.1.4.1.3097.3.1.1.1.1.13 | Integer32 (0..65531) | RO | |
column · Integer32 (0..65531) · read-only · current The length of the encryption key in bits used for the algorithm specified in the 'wgIpsecSaEspInEncAlg' object, or 0 if the key length is implicit in the specified algorithm or there is no encryption specified.
| ||||
| CwgIpsecSaEspInAuthAlg | 1.3.6.1.4.1.3097.3.1.1.1.1.14 | IpsecDoiAuthAlgorithm | RO | |
column · IpsecDoiAuthAlgorithm · read-only · current A unique value representing the hash algorithm applied to traffic or 0 if there is no authentication used. | ||||
| CwgIpsecSaEspInLimitSeconds | 1.3.6.1.4.1.3097.3.1.1.1.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current The maximum lifetime in seconds of the SA, or 0 if there is no time constraint on its expiration. The display value is limited to 4294967295 seconds (more than 136 years); values greater than that value will be truncated.
| ||||
| CwgIpsecSaEspInLimitKbytes | 1.3.6.1.4.1.3097.3.1.1.1.1.16 | Integer32 | RO | |
column · Integer32 · read-only · current The maximum traffic in kilobytes that the SA is allowed to support, or 0 if there is no traffic constraint on its expiration. The display value is limited to 4294967295 kilobytes; values greater than that value will be truncated.
| ||||
| CwgIpsecSaEspInAccSeconds | 1.3.6.1.4.1.3097.3.1.1.1.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current The number of seconds accumulated against the SA's expiration by time. This is also the number of seconds that the SA has existed.
| ||||
| CwgIpsecSaEspInAccKbytes | 1.3.6.1.4.1.3097.3.1.1.1.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current The amount of traffic accumulated that counts against the SA's expiration by traffic limitation, measured in Kbytes. This value may be 0 if the SA does not expire based on traffic.
| ||||
| CwgIpsecSaEspInUserOctets | 1.3.6.1.4.1.3097.3.1.1.1.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current The amount of user level traffic measured in bytes handled by the SA. This is not necessarily the same as the amount of traffic applied against the traffic expiration limit.
| ||||
| CwgIpsecSaEspInPackets | 1.3.6.1.4.1.3097.3.1.1.1.1.20 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets handled by the SA. | ||||
| CwgIpsecSaEspInDecryptErrors | 1.3.6.1.4.1.3097.3.1.1.1.1.21 | Counter32 | RO | |
column · Counter32 · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaEspInAuthErrors | 1.3.6.1.4.1.3097.3.1.1.1.1.22 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets discarded by the SA due to authentication errors. | ||||
| CwgIpsecSaEspInReplayErrors | 1.3.6.1.4.1.3097.3.1.1.1.1.23 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets discarded by the SA due to replay errors. | ||||
| CwgIpsecSaEspInPolicyErrors | 1.3.6.1.4.1.3097.3.1.1.1.1.24 | Counter32 | RO | |
column · Counter32 · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaEspInPadErrors | 1.3.6.1.4.1.3097.3.1.1.1.1.25 | Counter32 | RO | |
column · Counter32 · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaEspInOtherReceiveErrors | 1.3.6.1.4.1.3097.3.1.1.1.1.26 | Counter32 | RO | |
column · Counter32 · read-only · current Deprecated, currently unused. | ||||
| TwgIpsecSaAhInTable | 1.3.6.1.4.1.3097.3.1.1.2 | NA | ||
table · not-accessible · current The (conceptual) table containing information on IPSec inbound AH SAs. There should be one row for every inbound AH security association that exists in the entity. The maximum number of rows is implementation dependent. | ||||
| RwgIpsecSaAhInEntry | 1.3.6.1.4.1.3097.3.1.1.2.1 | NA | ||
row · not-accessible · current An entry (conceptual row) containing the information on a particular IPSec inbound AH SA. A row in this table cannot be created or deleted by SNMP operations on columns of the table. | ||||
| CwgIpsecSaAhInAddress | 1.3.6.1.4.1.3097.3.1.1.2.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The destination address of the SA. For implementations that do not support IPv6, this address should appear as one of the IPv4-mapped IPv6 addresses as defined in Section 2.5.4 of [IPV6AA]. Specifically, the prefix '0000:0000:0000:0000:0000:FFFF:' is used for IPv4 only nodes, while the prefix '0000:0000:0000:0000:0000:0000:' is used for bi-lingual nodes. | ||||
| CwgIpsecSaAhInSpi | 1.3.6.1.4.1.3097.3.1.1.2.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The security parameters index of the SA. | ||||
| CwgIpsecSaAhInDestId | 1.3.6.1.4.1.3097.3.1.1.2.1.3 | OCTET STRING (SIZE (1..255)) | RO | |
column · OCTET STRING (SIZE (1..255)) · read-only · current The destination identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation. This value is taken directly from the optional ID payloads that are exchange during SA creation negotiation. | ||||
| CwgIpsecSaAhInDestIdType | 1.3.6.1.4.1.3097.3.1.1.2.1.4 | IpsecDoiIdentType | RO | |
column · IpsecDoiIdentType · read-only · current The type of identifier presented by 'wgIpsecSaAhInDestId', or 0 if unknown or if the SA uses transport mode encapsulation. | ||||
| CwgIpsecSaAhInSourceId | 1.3.6.1.4.1.3097.3.1.1.2.1.5 | OCTET STRING (SIZE (1..255)) | RO | |
column · OCTET STRING (SIZE (1..255)) · read-only · current The source identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation. This value is taken directly from the optional ID payloads that are exchange during SA creation negotiation. | ||||
| CwgIpsecSaAhInSourceIdType | 1.3.6.1.4.1.3097.3.1.1.2.1.6 | IpsecDoiIdentType | RO | |
column · IpsecDoiIdentType · read-only · current The type of identifier presented by 'wgIpsecSaAhInSourceId', or 0 if unknown or if the SA uses transport mode encapsulation. | ||||
| CwgIpsecSaAhInProtocol | 1.3.6.1.4.1.3097.3.1.1.2.1.7 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current The transport-layer protocol number that this SA carries, or 0 if it carries any protocol. | ||||
| CwgIpsecSaAhInDestPort | 1.3.6.1.4.1.3097.3.1.1.2.1.8 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The destination port number of the protocol that this SA carries, or 0 if it carries any port number. | ||||
| CwgIpsecSaAhInSourcePort | 1.3.6.1.4.1.3097.3.1.1.2.1.9 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The source port number of the protocol that this SA carries, or 0 if it carries any port number. | ||||
| CwgIpsecSaAhInCreator | 1.3.6.1.4.1.3097.3.1.1.2.1.10 | IpsecSaCreatorIdent | RO | |
column · IpsecSaCreatorIdent · read-only · current The creator of this SA. This MIB makes no assumptions about how the SAs are created. They may be created statically, or by a key exchange protocol such as IKE, or by some other method. | ||||
| CwgIpsecSaAhInEncapsulation | 1.3.6.1.4.1.3097.3.1.1.2.1.11 | IpsecDoiEncapsulationMode | RO | |
column · IpsecDoiEncapsulationMode · read-only · current The type of encapsulation used by this SA. | ||||
| CwgIpsecSaAhInAuthAlg | 1.3.6.1.4.1.3097.3.1.1.2.1.12 | IpsecDoiAhTransform | RO | |
column · IpsecDoiAhTransform · read-only · current A unique value representing the hash algorithm applied to traffic carried by this SA if it uses ESP or 0 if there is no authentication applied by ESP. | ||||
| CwgIpsecSaAhInLimitSeconds | 1.3.6.1.4.1.3097.3.1.1.2.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current The maximum lifetime in seconds of the SA, or 0 if there is no time constraint on its expiration. The display value is limited to 4294967295 seconds (more than 136 years); values greater than that value will be truncated.
| ||||
| CwgIpsecSaAhInLimitKbytes | 1.3.6.1.4.1.3097.3.1.1.2.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current The maximum traffic in Kbytes that the SA is allowed to support, or 0 if there is no traffic constraint on its expiration. The display value is limited to 4294967295 kilobytes; values greater than that value will be truncated.
| ||||
| CwgIpsecSaAhInAccSeconds | 1.3.6.1.4.1.3097.3.1.1.2.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The number of seconds accumulated against the SA's expiration by time. This is also the number of seconds that the SA has existed.
| ||||
| CwgIpsecSaAhInAccKbytes | 1.3.6.1.4.1.3097.3.1.1.2.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current The amount of traffic accumulated that counts against the SA's expiration by traffic limitation, measured in Kbytes. This value may be 0 if the SA does not expire based on traffic.
| ||||
| CwgIpsecSaAhInUserOctets | 1.3.6.1.4.1.3097.3.1.1.2.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current The amount of user level traffic measured in bytes handled by the SA. This is not necessarily the same as the amount of traffic applied against the traffic expiration limit.
| ||||
| CwgIpsecSaAhInPackets | 1.3.6.1.4.1.3097.3.1.1.2.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets handled by the SA. | ||||
| CwgIpsecSaAhInAuthErrors | 1.3.6.1.4.1.3097.3.1.1.2.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets discarded by the SA due to authentication errors. | ||||
| CwgIpsecSaAhInReplayErrors | 1.3.6.1.4.1.3097.3.1.1.2.1.20 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets discarded by the SA due to replay errors. | ||||
| CwgIpsecSaAhInPolicyErrors | 1.3.6.1.4.1.3097.3.1.1.2.1.21 | Counter32 | RO | |
column · Counter32 · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaAhInOtherReceiveErrors | 1.3.6.1.4.1.3097.3.1.1.2.1.22 | Counter32 | RO | |
column · Counter32 · read-only · current Deprecated, currently unused. | ||||
| TwgIpsecSaIpcompInTable | 1.3.6.1.4.1.3097.3.1.1.3 | NA | ||
table · not-accessible · current The (conceptual) table containing information on IPSec inbound IPCOMP SAs. There should be one row for every inbound IPCOMP (security) association that exists in the entity. The maximum number of rows is implementation dependent. | ||||
| RwgIpsecSaIpcompInEntry | 1.3.6.1.4.1.3097.3.1.1.3.1 | NA | ||
row · not-accessible · current An entry (conceptual row) containing the information on a particular IPSec inbound IPCOMP SA. A row in this table cannot be created or deleted by SNMP operations on columns of the table. | ||||
| CwgIpsecSaIpcompInAddress | 1.3.6.1.4.1.3097.3.1.1.3.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaIpcompInCpi | 1.3.6.1.4.1.3097.3.1.1.3.1.2 | IpsecDoiIpcompTransform | RO | |
column · IpsecDoiIpcompTransform · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaIpcompInDestId | 1.3.6.1.4.1.3097.3.1.1.3.1.3 | OCTET STRING (SIZE (1..255)) | RO | |
column · OCTET STRING (SIZE (1..255)) · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaIpcompInDestIdType | 1.3.6.1.4.1.3097.3.1.1.3.1.4 | IpsecDoiIdentType | RO | |
column · IpsecDoiIdentType · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaIpcompInSourceId | 1.3.6.1.4.1.3097.3.1.1.3.1.5 | OCTET STRING (SIZE (1..255)) | RO | |
column · OCTET STRING (SIZE (1..255)) · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaIpcompInSourceIdType | 1.3.6.1.4.1.3097.3.1.1.3.1.6 | IpsecDoiIdentType | RO | |
column · IpsecDoiIdentType · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaIpcompInProtocol | 1.3.6.1.4.1.3097.3.1.1.3.1.7 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaIpcompInDestPort | 1.3.6.1.4.1.3097.3.1.1.3.1.8 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaIpcompInSourcePort | 1.3.6.1.4.1.3097.3.1.1.3.1.9 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaIpcompInCreator | 1.3.6.1.4.1.3097.3.1.1.3.1.10 | IpsecSaCreatorIdent | RO | |
column · IpsecSaCreatorIdent · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaIpcompInEncapsulation | 1.3.6.1.4.1.3097.3.1.1.3.1.11 | IpsecDoiEncapsulationMode | RO | |
column · IpsecDoiEncapsulationMode · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaIpcompInDecompAlg | 1.3.6.1.4.1.3097.3.1.1.3.1.12 | IpsecDoiIpcompTransform | RO | |
column · IpsecDoiIpcompTransform · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaIpcompInSeconds | 1.3.6.1.4.1.3097.3.1.1.3.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current Deprecated, currently unused.
| ||||
| CwgIpsecSaIpcompInUserOctets | 1.3.6.1.4.1.3097.3.1.1.3.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current Deprecated, currently unused.
| ||||
| CwgIpsecSaIpcompInPackets | 1.3.6.1.4.1.3097.3.1.1.3.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaIpcompInDecompErrors | 1.3.6.1.4.1.3097.3.1.1.3.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaIpcompInOtherReceiveErrors | 1.3.6.1.4.1.3097.3.1.1.3.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current Deprecated, currently unused. | ||||
| TwgIpsecSaEspOutTable | 1.3.6.1.4.1.3097.3.1.1.4 | NA | ||
table · not-accessible · current The (conceptual) table containing information on IPSec Outbound ESP SAs. There should be one row for every outbound ESP security association that exists in the entity. The maximum number of rows is implementation dependent. | ||||
| RwgIpsecSaEspOutEntry | 1.3.6.1.4.1.3097.3.1.1.4.1 | NA | ||
row · not-accessible · current An entry (conceptual row) containing the information on a particular IPSec Outbound ESP SA. A row in this table cannot be created or deleted by SNMP operations on columns of the table. | ||||
| CwgIpsecSaEspOutAddress | 1.3.6.1.4.1.3097.3.1.1.4.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The destination address of the SA. For implementations that do not support IPv6, this address should appear as one of the IPv4-mapped IPv6 addresses as defined in Section 2.5.4 of [IPV6AA]. Specifically, the prefix '0000:0000:0000:0000:0000:FFFF:' is used for IPv4 only nodes, while the prefix '0000:0000:0000:0000:0000:0000:' is used for bi-lingual nodes. | ||||
| CwgIpsecSaEspOutSpi | 1.3.6.1.4.1.3097.3.1.1.4.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The security parameters index of the SA. | ||||
| CwgIpsecSaEspOutSourceId | 1.3.6.1.4.1.3097.3.1.1.4.1.3 | OCTET STRING (SIZE (4..255)) | RO | |
column · OCTET STRING (SIZE (4..255)) · read-only · current The source identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation. This value is taken directly from the optional ID payloads that are exchange during phase 2 negotiations. | ||||
| CwgIpsecSaEspOutSourceIdType | 1.3.6.1.4.1.3097.3.1.1.4.1.4 | IpsecDoiIdentType | RO | |
column · IpsecDoiIdentType · read-only · current The type of identifier presented by 'wgIpsecSaEspOutSourceId', or 0 if unknown or if the SA uses transport mode encapsulation. | ||||
| CwgIpsecSaEspOutDestId | 1.3.6.1.4.1.3097.3.1.1.4.1.5 | OCTET STRING (SIZE (4..255)) | RO | |
column · OCTET STRING (SIZE (4..255)) · read-only · current The destination identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation. This value is taken directly from the optional ID payloads that are exchange during phase 2 negotiations. | ||||
| CwgIpsecSaEspOutDestIdType | 1.3.6.1.4.1.3097.3.1.1.4.1.6 | IpsecDoiIdentType | RO | |
column · IpsecDoiIdentType · read-only · current The type of identifier presented by 'wgIpsecSaEspOutDestId', or 0 if unknown or if the SA uses transport mode encapsulation. | ||||
| CwgIpsecSaEspOutProtocol | 1.3.6.1.4.1.3097.3.1.1.4.1.7 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current The transport-layer protocol number that this SA carries, or 0 if it carries any protocol. | ||||
| CwgIpsecSaEspOutSourcePort | 1.3.6.1.4.1.3097.3.1.1.4.1.8 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The source port number of the protocol that this SA carries, or 0 if it carries any port number. | ||||
| CwgIpsecSaEspOutDestPort | 1.3.6.1.4.1.3097.3.1.1.4.1.9 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The destination port number of the protocol that this SA carries, or 0 if it carries any port number. | ||||
| CwgIpsecSaEspOutCreator | 1.3.6.1.4.1.3097.3.1.1.4.1.10 | IpsecSaCreatorIdent | RO | |
column · IpsecSaCreatorIdent · read-only · current The creator of this SA. This MIB makes no assumptions about how the SAs are created. They may be created statically, or by a key exchange protocol such as IKE, or by some other method. | ||||
| CwgIpsecSaEspOutEncapsulation | 1.3.6.1.4.1.3097.3.1.1.4.1.11 | IpsecDoiEncapsulationMode | RO | |
column · IpsecDoiEncapsulationMode · read-only · current The type of encapsulation used by this SA. | ||||
| CwgIpsecSaEspOutEncAlg | 1.3.6.1.4.1.3097.3.1.1.4.1.12 | IpsecDoiEspTransform | RO | |
column · IpsecDoiEspTransform · read-only · current A unique value representing the encryption algorithm applied to traffic or 0 if there is no encryption used. | ||||
| CwgIpsecSaEspOutEncKeyLength | 1.3.6.1.4.1.3097.3.1.1.4.1.13 | Integer32 (0..65531) | RO | |
column · Integer32 (0..65531) · read-only · current The length of the encryption key in bits used for the algorithm specified in the 'wgIpsecSaEspOutEncAlg' object, or 0 if the key length is implicit in the specified algorithm or there is no encryption specified.
| ||||
| CwgIpsecSaEspOutAuthAlg | 1.3.6.1.4.1.3097.3.1.1.4.1.14 | IpsecDoiAuthAlgorithm | RO | |
column · IpsecDoiAuthAlgorithm · read-only · current A unique value representing the hash algorithm applied to traffic or 0 if there is no authentication used. | ||||
| CwgIpsecSaEspOutLimitSeconds | 1.3.6.1.4.1.3097.3.1.1.4.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current The maximum lifetime in seconds of the SA, or 0 if there is no time constraint on its expiration. The display value is limited to 4294967295 seconds (more than 136 years); values greater than that value will be truncated.
| ||||
| CwgIpsecSaEspOutLimitKbytes | 1.3.6.1.4.1.3097.3.1.1.4.1.16 | Integer32 | RO | |
column · Integer32 · read-only · current The maximum traffic in kbytes that the SA is allowed to support, or 0 if there is no traffic constraint on its expiration. The display value is limited to 4294967295 kilobytes; values greater than that value will be truncated.
| ||||
| CwgIpsecSaEspOutAccSeconds | 1.3.6.1.4.1.3097.3.1.1.4.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current The number of seconds accumulated against the SA's expiration by time. This is also the number of seconds that the SA has existed.
| ||||
| CwgIpsecSaEspOutAccKbytes | 1.3.6.1.4.1.3097.3.1.1.4.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current The amount of traffic accumulated that counts against the SA's expiration by traffic limitation, measured in Kbytes. This value may be 0 if the SA does not expire based on traffic.
| ||||
| CwgIpsecSaEspOutUserOctets | 1.3.6.1.4.1.3097.3.1.1.4.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current The amount of user level traffic measured in bytes handled by the SA. This is not necessarily the same as the amount of traffic applied against the traffic expiration limit.
| ||||
| CwgIpsecSaEspOutPackets | 1.3.6.1.4.1.3097.3.1.1.4.1.20 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets handled by the SA. | ||||
| CwgIpsecSaEspOutSendErrors | 1.3.6.1.4.1.3097.3.1.1.4.1.21 | Counter32 | RO | |
column · Counter32 · read-only · current Deprecated, currently unused. | ||||
| TwgIpsecSaAhOutTable | 1.3.6.1.4.1.3097.3.1.1.5 | NA | ||
table · not-accessible · current The (conceptual) table containing information on IPSec Outbound AH SAs. There should be one row for every outbound AH security association that exists in the entity. The maximum number of rows is implementation dependent. | ||||
| RwgIpsecSaAhOutEntry | 1.3.6.1.4.1.3097.3.1.1.5.1 | NA | ||
row · not-accessible · current An entry (conceptual row) containing the information on a particular IPSec Outbound AH SA. A row in this table cannot be created or deleted by SNMP operations on columns of the table. | ||||
| CwgIpsecSaAhOutAddress | 1.3.6.1.4.1.3097.3.1.1.5.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The destination address of the SA. For implementations that do not support IPv6, this address should appear as one of the IPv4-mapped IPv6 addresses as defined in Section 2.5.4 of [IPV6AA]. Specifically, the prefix '0000:0000:0000:0000:0000:FFFF:' is used for IPv4 only nodes, while the prefix '0000:0000:0000:0000:0000:0000:' is used for bi-lingual nodes. | ||||
| CwgIpsecSaAhOutSpi | 1.3.6.1.4.1.3097.3.1.1.5.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The security parameters index of the SA. | ||||
| CwgIpsecSaAhOutSourceId | 1.3.6.1.4.1.3097.3.1.1.5.1.3 | OCTET STRING (SIZE (4..255)) | RO | |
column · OCTET STRING (SIZE (4..255)) · read-only · current The source identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation. This value is taken directly from the optional ID payloads that are exchange during phase 2 negotiations. | ||||
| CwgIpsecSaAhOutSourceIdType | 1.3.6.1.4.1.3097.3.1.1.5.1.4 | IpsecDoiIdentType | RO | |
column · IpsecDoiIdentType · read-only · current The type of identifier presented by 'wgIpsecSaAhOutSourceId', or 0 if unknown or if the SA uses transport mode encapsulation. | ||||
| CwgIpsecSaAhOutDestId | 1.3.6.1.4.1.3097.3.1.1.5.1.5 | OCTET STRING (SIZE (4..255)) | RO | |
column · OCTET STRING (SIZE (4..255)) · read-only · current The destination identifier of the SA, or 0 if unknown or if the SA uses transport mode encapsulation. This value is taken directly from the optional ID payloads that are exchange during phase 2 negotiations. | ||||
| CwgIpsecSaAhOutDestIdType | 1.3.6.1.4.1.3097.3.1.1.5.1.6 | IpsecDoiIdentType | RO | |
column · IpsecDoiIdentType · read-only · current The type of identifier presented by 'wgIpsecSaAhOutDestId', or 0 if unknown or if the SA uses transport mode encapsulation. | ||||
| CwgIpsecSaAhOutProtocol | 1.3.6.1.4.1.3097.3.1.1.5.1.7 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current The transport-layer protocol number that this SA carries, or 0 if it carries any protocol. | ||||
| CwgIpsecSaAhOutSourcePort | 1.3.6.1.4.1.3097.3.1.1.5.1.8 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The source port number of the protocol that this SA carries, or 0 if it carries any port number. | ||||
| CwgIpsecSaAhOutDestPort | 1.3.6.1.4.1.3097.3.1.1.5.1.9 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The destination port number of the protocol that this SA carries, or 0 if it carries any port number. | ||||
| CwgIpsecSaAhOutCreator | 1.3.6.1.4.1.3097.3.1.1.5.1.10 | IpsecSaCreatorIdent | RO | |
column · IpsecSaCreatorIdent · read-only · current The creator of this SA. This MIB makes no assumptions about how the SAs are created. They may be created statically, or by a key exchange protocol such as IKE, or by some other method. | ||||
| CwgIpsecSaAhOutEncapsulation | 1.3.6.1.4.1.3097.3.1.1.5.1.11 | IpsecDoiEncapsulationMode | RO | |
column · IpsecDoiEncapsulationMode · read-only · current The type of encapsulation used by this SA. | ||||
| CwgIpsecSaAhOutAuthAlg | 1.3.6.1.4.1.3097.3.1.1.5.1.12 | IpsecDoiAhTransform | RO | |
column · IpsecDoiAhTransform · read-only · current A unique value representing the hash algorithm applied to traffic or 0 if there is no authentication used. | ||||
| CwgIpsecSaAhOutLimitSeconds | 1.3.6.1.4.1.3097.3.1.1.5.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current The maximum lifetime in seconds of the SA, or 0 if there is no time constraint on its expiration. The display value is limited to 4294967295 seconds (more than 136 years); values greater than that value will be truncated.
| ||||
| CwgIpsecSaAhOutLimitKbytes | 1.3.6.1.4.1.3097.3.1.1.5.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current The maximum traffic in Kbytes that the SA is allowed to support, or 0 if there is no traffic constraint on its expiration. The display value is limited to 4294967295 kilobytes; values greater than that value will be truncated.
| ||||
| CwgIpsecSaAhOutAccSeconds | 1.3.6.1.4.1.3097.3.1.1.5.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The number of seconds accumulated against the SA's expiration by time. This is also the number of seconds that the SA has existed.
| ||||
| CwgIpsecSaAhOutAccKbytes | 1.3.6.1.4.1.3097.3.1.1.5.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current The amount of traffic accumulated that counts against the SA's expiration by traffic limitation, measured in Kbytes. This value may be 0 if the SA does not expire based on traffic.
| ||||
| CwgIpsecSaAhOutUserOctets | 1.3.6.1.4.1.3097.3.1.1.5.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current The amount of user level traffic measured in bytes handled by the SA. This is not necessarily the same as the amount of traffic applied against the traffic expiration limit.
| ||||
| CwgIpsecSaAhOutPackets | 1.3.6.1.4.1.3097.3.1.1.5.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets handled by the SA. | ||||
| CwgIpsecSaAhOutSendErrors | 1.3.6.1.4.1.3097.3.1.1.5.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current Deprecated, currently unused. | ||||
| TwgIpsecSaIpcompOutTable | 1.3.6.1.4.1.3097.3.1.1.6 | NA | ||
table · not-accessible · current Deprecated, currently unused. | ||||
| RwgIpsecSaIpcompOutEntry | 1.3.6.1.4.1.3097.3.1.1.6.1 | NA | ||
row · not-accessible · current Deprecated, currently unused. | ||||
| CwgIpsecSaIpcompOutAddress | 1.3.6.1.4.1.3097.3.1.1.6.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaIpcompOutCpi | 1.3.6.1.4.1.3097.3.1.1.6.1.2 | IpsecDoiIpcompTransform | RO | |
column · IpsecDoiIpcompTransform · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaIpcompOutSourceId | 1.3.6.1.4.1.3097.3.1.1.6.1.3 | OCTET STRING (SIZE (4..255)) | RO | |
column · OCTET STRING (SIZE (4..255)) · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaIpcompOutSourceIdType | 1.3.6.1.4.1.3097.3.1.1.6.1.4 | IpsecDoiIdentType | RO | |
column · IpsecDoiIdentType · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaIpcompOutDestId | 1.3.6.1.4.1.3097.3.1.1.6.1.5 | OCTET STRING (SIZE (4..255)) | RO | |
column · OCTET STRING (SIZE (4..255)) · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaIpcompOutDestIdType | 1.3.6.1.4.1.3097.3.1.1.6.1.6 | IpsecDoiIdentType | RO | |
column · IpsecDoiIdentType · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaIpcompOutProtocol | 1.3.6.1.4.1.3097.3.1.1.6.1.7 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current The transport-layer protocol number that this SA carries, or 0 if it carries any protocol. | ||||
| CwgIpsecSaIpcompOutSourcePort | 1.3.6.1.4.1.3097.3.1.1.6.1.8 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaIpcompOutDestPort | 1.3.6.1.4.1.3097.3.1.1.6.1.9 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaIpcompOutCreator | 1.3.6.1.4.1.3097.3.1.1.6.1.10 | IpsecSaCreatorIdent | RO | |
column · IpsecSaCreatorIdent · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaIpcompOutEncapsulation | 1.3.6.1.4.1.3097.3.1.1.6.1.11 | IpsecDoiEncapsulationMode | RO | |
column · IpsecDoiEncapsulationMode · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaIpcompOutCompAlg | 1.3.6.1.4.1.3097.3.1.1.6.1.12 | IpsecDoiIpcompTransform | RO | |
column · IpsecDoiIpcompTransform · read-only · current Deprecated, currently unused. | ||||
| CwgIpsecSaIpcompOutSeconds | 1.3.6.1.4.1.3097.3.1.1.6.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current Deprecated, currently unused.
| ||||
| CwgIpsecSaIpcompOutUserOctets | 1.3.6.1.4.1.3097.3.1.1.6.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current Deprecated, currently unused.
| ||||
| CwgIpsecSaIpcompOutPackets | 1.3.6.1.4.1.3097.3.1.1.6.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets handled by the SA. | ||||
| NwgSaStatistics | 1.3.6.1.4.1.3097.3.1.2 | |||
node · current This is the base object identifier for all objects which are global counters for IPSec security associations. | ||||
| SwgIpsecEspCurrentInboundSAs | 1.3.6.1.4.1.3097.3.1.2.1 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The current number of inbound ESP SAs in the entity. | ||||
| SwgIpsecEspTotalInboundSAs | 1.3.6.1.4.1.3097.3.1.2.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current Deprecated, currently unused. | ||||
| SwgIpsecEspCurrentOutboundSAs | 1.3.6.1.4.1.3097.3.1.2.3 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The current number of outbound ESP SAs in the entity. | ||||
| SwgIpsecEspTotalOutboundSAs | 1.3.6.1.4.1.3097.3.1.2.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current Deprecated, currently unused. | ||||
| SwgIpsecAhCurrentInboundSAs | 1.3.6.1.4.1.3097.3.1.2.5 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The current number of inbound AH SAs in the entity. | ||||
| SwgIpsecAhTotalInboundSAs | 1.3.6.1.4.1.3097.3.1.2.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current Deprecated, currently unused. | ||||
| SwgIpsecAhCurrentOutboundSAs | 1.3.6.1.4.1.3097.3.1.2.7 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The current number of outbound AH SAs in the entity. | ||||
| SwgIpsecAhTotalOutboundSAs | 1.3.6.1.4.1.3097.3.1.2.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current Deprecated, currently unused. | ||||
| SwgIpsecIpcompCurrentInboundSAs | 1.3.6.1.4.1.3097.3.1.2.9 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Deprecated, currently unused. | ||||
| SwgIpsecIpcompTotalInboundSAs | 1.3.6.1.4.1.3097.3.1.2.10 | Counter32 | RO | |
scalar · Counter32 · read-only · current Deprecated, currently unused. | ||||
| SwgIpsecIpcompCurrentOutboundSAs | 1.3.6.1.4.1.3097.3.1.2.11 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current Deprecated, currently unused. | ||||
| SwgIpsecIpcompTotalOutboundSAs | 1.3.6.1.4.1.3097.3.1.2.12 | Counter32 | RO | |
scalar · Counter32 · read-only · current Deprecated, currently unused. | ||||
| NwgSaErrors | 1.3.6.1.4.1.3097.3.1.3 | |||
node · current This is the base object identifier for all objects which are global error counters for IPSec security associations. | ||||
| SwgIpsecDecryptionErrors | 1.3.6.1.4.1.3097.3.1.3.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current Deprecated, currently unused. | ||||
| SwgIpsecAuthenticationErrors | 1.3.6.1.4.1.3097.3.1.3.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current Deprecated, currently unused. | ||||
| SwgIpsecReplayErrors | 1.3.6.1.4.1.3097.3.1.3.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current Deprecated, currently unused. | ||||
| SwgIpsecPolicyErrors | 1.3.6.1.4.1.3097.3.1.3.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current Deprecated, currently unused. | ||||
| SwgIpsecOtherReceiveErrors | 1.3.6.1.4.1.3097.3.1.3.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current Deprecated, currently unused. | ||||
| SwgIpsecSendErrors | 1.3.6.1.4.1.3097.3.1.3.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current Deprecated, currently unused. | ||||
| SwgIpsecUnknownSpiErrors | 1.3.6.1.4.1.3097.3.1.3.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current Deprecated, currently unused. | ||||
Textual conventions
IpsecIpv6AddressOCTET STRING (SIZE (16))Display hint:
2x:2x:2x:2x:2x:2x:1d.1d.1d.1dThis data type is used to model IPv6 address prefixes. This is a binary string of 16 octets in network byte-order.
IpsecSaCreatorIdentINTEGERDisplay hint:
dike(2)other(3)static(1)unknown(0)A value indicating how an SA was created.