MIB Browser

IPSEC-ISAKMP-IKE-DOI-TC

WatchGuard Technologies Inc.
The MIB module which defines the textual conventions
used in IPSEC MIBs.  This includes Internet DOI
numbers defined in RFC 2407, ISAKMP numbers defined
in RFC 2408, and IKE numbers defined in RFC 2409.

These Textual Conventions are defined in a seperate
MIB module since they are protocol numbers managed
by the IANA.  Revision control after publication
will be under the authority of the IANA.
Organization
Shiva
Root OID
1.3.6.1.4.1.3097.100
Last updated
Objects
1
Source
Show full MIB
snmptranslate -m IPSEC-ISAKMP-IKE-DOI-TC -Tp
snmpwalk -v2c -c <community> -m IPSEC-ISAKMP-IKE-DOI-TC <host> 1.3.6.1.4.1.3097.100

Imports

SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIBits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, experimental, iso, mib-2
SNMPv2-TCDisplayString, PhysAddress, TEXTUAL-CONVENTION
WATCHGUARD-MIBwatchguard

OID tree

NameOIDTypeAccessStatus
IipsecIsakmpIkeDoiTC1.3.6.1.4.1.3097.100

Textual conventions

IkeAuthMethod INTEGER

Display hint: d

dssSignatures(2) encryptionWithElGamal(6) encryptionWithRsa(4) preSharedKey(1) reserved(0) revisedEncryptionWithElGamal(7) revisedEncryptionWithRsa(5) rsaSignatures(3)

Values for authentication methods negotiated
for the ISAKMP SA by IKE in Phase I.  These are
values for SA Attrbute type Authentication
Method (3).

Values 6-65000 are reserved to IANA.

Values 65001-65535 are for private use among
mutually consenting parties.
IkeEncryptionAlgorithm INTEGER

Display hint: d

blowfishCbc(3) castCbc(6) desCbc(1) ideaCbc(2) rc5R16B64Cbc(4) reserved(0) tripleDesCbc(5)

Values for encryption algorithms negotiated
for the ISAKMP SA by IKE in Phase I.  These are
values for SA Attrbute type Encryption
Algorithm (1).

Values 7-65000 are reserved to IANA.

Values 65001-65535 are for private use among
mutually consenting parties.
IkeExchangeType INTEGER

Display hint: d

acknowledgedInfo(34) aggressive(4) authOnly(3) base(1) informational(5) mainMode(2) newGroupMode(33) quickMode(32) reserved(0)

These are the values used for the exchange types in
the ISAKMP header.

The values 32-239 are DOI-specific, these values are
for the IPSec DOI used by IKE.

The values 240-255 are reserved for private use
amongst cooperating systems.
IkeGroupDescription INTEGER

Display hint: d

ec2nGalois2P155(3) ec2nGalois2P185(4) modp1024(2) modp1536(5) modp768(1) reserved(0)

Values for Oakley key computation groups for
Diffie-Hellman exchange negotiated for the ISAKMP
SA by IKE in Phase I.  They are also used in Phase II
when perfect forward secrecy is in use.  These are
values for SA Attrbute type Group Description (4).
IkeGroupType INTEGER

Display hint: d

ec2n(3) ecp(2) modp(1) reserved(0)

Values for Oakley key computation group types
negotiated for the ISAKMP SA by IKE in Phase I.
They are also used in Phase II when perfect forward
secrecy is in use.  These are values for SA Attribute
type Group Type (5).
IkeHashAlgorithm INTEGER

Display hint: d

md5(1) reserved(0) sha(2) tiger(3)

Values for hash algorithms negotiated
for the ISAKMP SA by IKE in Phase I.  These are
values for SA Attrbute type Hash Algorithm (2).

Values 4-65000 are reserved to IANA.

Values 65001-65535 are for private use among
mutually consenting parties.
IkeNotifyMessageType INTEGER

Display hint: d

addressNotification(26) attributesNotSupported(13) authenticationFailed(24) badProposalSyntax(15) certTypeUnsupported(21) certificateUnavailable(28) doiNotSupported(2) initialContact(24578) invalidCertAuthority(22) invalidCertEncoding(19) invalidCertificate(20) invalidCookie(4) invalidExchangeType(7) invalidFlags(8) invalidHashInformation(23) invalidIdInformation(18) invalidKeyInformation(17) invalidMajorVersion(5) invalidMessageId(9) invalidMinorVersion(6) invalidPayloadType(1) invalidProtocolId(10) invalidSignature(25) invalidSpi(11) invalidTransformId(12) noProposalChosen(14) notifySaLifetime(27) payloadMalformed(16) replayStatus(24577) reserved(0) responderLifetime(24576) situationNotSupported(3) unequalPayloadLengths(30) unsupportedExchangeType(29)

These are the values for the types of notification
messages.  They are used as the Notify Message Type
field in the Notification Payload.

This textual convention merges the types
for error types (in the range 1-16386) and for
notification types (in the range 16384-65535).

This textual convention is a merge of values
defined by ISAKMP with the additional values
defined in the IPSEC DOI.

The values 16001-16383 are reserved for private use
as error types amongst cooperating systems.

The values 32001-32767 are reserved for private use
as notification types amongst cooperating systems.
IkePrf Unsigned32 (0..65535)

Display hint: d

Values for Pseudo-Random Functions used with
with the hash algorithm negotiated for the ISAKMP SA
by IKE in Phase I.  There are currently no
pseudo-random functions defined, the default HMAC is
always used.  These are values for SA Attribute type
PRF (13).

Values 1-65000 are reserved to IANA.

Values 65001-65535 are for private use among
mutually consenting parties.
IpsecDoiAhTransform INTEGER

Display hint: d

ahDes(4) ahMd5(2) ahSha(3) reserved(0) reserved1(1)

The IPSEC DOI AH Transform Identifier is an 8-bit
value which identifies a particular algorithm to be
used to provide integrity protection for AH.  It is
used in the Tranform-ID field of a ISAKMP Transform
Payload for the IPSEC DOI, when the Protocol-Id of
the associated Proposal Payload is 2 (AH).

The values 249-255 are reserved for private use
amongst cooperating systems.
IpsecDoiAuthAlgorithm INTEGER

Display hint: d

desMac(3) hmacMd5(1) hmacSha(2) kpdk(4) reserved(0)

The ESP Authentication Algorithm used in the IPSEC
DOI as a SA Attributes definition in the Transform
Payload of Phase II of an IKE negotiation.  This
set of values defines the AH authentication
algorithm, when the associated Proposal Payload has
a Protocol-ID of 2 (AH).  This set of values
defines the ESP authentication algorithm, when the
associated Proposal Payload has a Protocol-ID
of 3 (ESP).

Values 5-61439 are reserved to IANA.

Values 61440-65535 are for private use.

In a MIB, a value of 0 indicates that ESP
has been negotiated without authentication.
IpsecDoiEncapsulationMode INTEGER

Display hint: d

reserved(0) transport(2) tunnel(1)

The Encapsulation Mode used as an IPSEC DOI
SA Attributes definition in the Transform Payload
of a Phase II IKE negotiation.  This set of
values defines encapsulation modes used for AH,
ESP, and IPCOMP when the associated Proposal Payload
has a Protocol-ID of 3 (ESP).

Values 3-61439 are reserved to IANA.

Values 61440-65535 are for private use.
IpsecDoiEspTransform INTEGER

Display hint: d

esp3Des(3) esp3Idea(8) espBlowfish(7) espCast(6) espDes(2) espDesIv32(9) espDesIv64(1) espIdea(5) espNull(11) espRc4(10) espRc5(4) reserved(0)

The IPSEC DOI ESP Transform Identifier is an 8-bit
value which identifies a particular algorithm to be
used to provide secrecy protection for ESP.  It is
used in the Tranform-ID field of a ISAKMP Transform
Payload for the IPSEC DOI, when the Protocol-Id of
the associated Proposal Payload is 2 (AH), 3 (ESP),
and 4 (IPCOMP).

The values 249-255 are reserved for private use
amongst cooperating systems.
IpsecDoiIdentType INTEGER

Display hint: d

idDerAsn1Dn(9) idDerAsn1Gn(10) idFqdn(2) idIpv4Addr(1) idIpv4AddrRange(7) idIpv4AddrSubnet(4) idIpv6Addr(5) idIpv6AddrRange(8) idIpv6AddrSubnet(6) idKeyId(11) idUserFqdn(3) reserved(0)

The IPSEC DOI Identification Type is an 8-bit value
which is used in the ID Type field as a discriminant
for interpretation of the variable-length
Identification Payload.

The values 249-255 are reserved for private use
amongst cooperating systems.
IpsecDoiIpcompTransform INTEGER

Display hint: d

ipcompDeflate(2) ipcompLzs(3) ipcompOui(1) reserved(0)

The IPSEC DOI IPCOMP Transform Identifier is an
8-bit value which identifies a particular algorithm
to be used to provide IP-level compression before
ESP.  It is used in the Tranform-ID field of a ISAKMP
Transform Payload for the IPSEC DOI, when the
Protocol-Id of the associated Proposal Payload
is 4 (IPCOMP).

The values 1-47 are reserved for algorithms for which
an RFC has been approved for publication.

The values 48-63 are reserved for private use amongst
cooperating systems.

The values 64-255 are reserved for future expansion.
IpsecDoiSecProtocolId INTEGER

Display hint: d

protoIpcomp(4) protoIpsecAh(2) protoIpsecEsp(3) protoIsakmp(1) reserved(0)

These are the IPSEC DOI values for the Protocol-Id
field in an ISAKMP Proposal Payload, and in all
Notification Payloads.

They are also used as the Protocol-ID In the
Notification Payload and the Delete Payload.

The values 249-255 are reserved for private use
amongst cooperating systems.
IpsecDoiSituation Unsigned32 (0..4294967295)

Display hint: x

The IPSEC DOI Situation provides information that
can be used by the responder to make a policy
determination about how to process the incoming
Security Association request.

It is a four (4) octet bitmask, with the following
values:

sitIdentityOnly            0x01
sitSecrecy                 0x02
sitIntegrity               0x04

The upper two bits (0x80000000 and 0x40000000) are
reserved for private use amongst cooperating
systems.
IpsecDoiTransformIdent INTEGER

Display hint: d

keyIke(1) reserved(0)

The IPSEC DOI ISAKMP Transform Identifier is an
8-bit value which identifies a key exchange protocol
to be used for the negotiation.  It is used in the
Transform-Id field of an IKE Phase I Transform
Payload.

The values 249-255 are reserved for private use
amongst cooperating systems.
IsakmpCertificateEncoding INTEGER

Display hint: d

arl(8) crl(7) dnsSignedKey(3) kerberosTokens(6) pgp(2) pkcs7(1) spki(9) x509Attribute(10) x509KeyExchange(5) x509Signature(4)

These are the values for the types of
certificate-related information contained in the
Certificate Data field of a Certificate Payload.
They are used in the Cert Encoding field of the
Certificate Payload.

Values 11-255 are reserved.
IsakmpDOI INTEGER

Display hint: d

ipsecDOI(1) isakmp(0)

These are the domain of interpretation values for
the ISAKMP Protocol.  They are a 32-bit value
used in the Domain of Interpretation field of the
Security Association Payload.
Values 2-4294967295 are reserved to the IANA.
IsakmpExchangeType INTEGER

Display hint: d

aggressive(4) authOnly(3) base(1) identityProtect(2) informational(5) reserved(0)

These are the values used for the exchange types in
the ISAKMP header.

Values up to 31 are reserved for future
DOI-independent assignment for ISAKMP.

The values 240-255 are reserved for private use
amongst cooperating systems.
IsakmpNotifyMessageType INTEGER

Display hint: d

addressNotification(26) attributesNotSupported(13) authenticationFailed(24) badProposalSyntax(15) certTypeUnsupported(21) certificateUnavailable(28) doiNotSupported(2) invalidCertAuthority(22) invalidCertEncoding(19) invalidCertificate(20) invalidCookie(4) invalidExchangeType(7) invalidFlags(8) invalidHashInformation(23) invalidIdInformation(18) invalidKeyInformation(17) invalidMajorVersion(5) invalidMessageId(9) invalidMinorVersion(6) invalidPayloadType(1) invalidProtocolId(10) invalidSignature(25) invalidSpi(11) invalidTransformId(12) noProposalChosen(14) notifySaLifetime(27) payloadMalformed(16) reserved(0) situationNotSupported(3) unequalPayloadLengths(30) unsupportedExchangeType(29)

These are the values for the types of notification
messages.  They are used as the Notify Message Type
field in the Notification Payload.

This textual convention merges the types
for error types (in the range 1-16386) and for
notification types (in the range 16384-65535).

The values 16001-16383 are reserved for private use
as error types amongst cooperating systems.

The values 24576-32767 are reserved for use in
each DOI.  Each DOI should have a clone of this
textual convention adding local values.

The values 32768-40958 are reserved for private use
as notification types amongst cooperating systems.

Used by