VENTURI-SERVER-SYSTEM-MIB
Venturi WirelessVenturi Server system information Copyright 2004-2013 Venturi Wireless All rights reserved. This MIB module general system information available from Venturi servers.
snmptranslate -m VENTURI-SERVER-SYSTEM-MIB -Tpsnmpwalk -v2c -c <community> -m VENTURI-SERVER-SYSTEM-MIB <host> 1.3.6.1.4.1.3382.12.1.2Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
| VENTURI-SERVER-MIB | vServerMgmt |
| VENTURI-TC | VenturiBooleanType, VenturiConditionState, VenturiConditionType |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IvServerSystem | 1.3.6.1.4.1.3382.12.1.2 | ||||||||||||
identity Venturi Server system information Copyright 2004-2013 Venturi Wireless All rights reserved. This MIB module general system information available from Venturi servers. | |||||||||||||
| NvServerGeneral | 1.3.6.1.4.1.3382.12.1.2.1 | ||||||||||||
| NvServerGeneralScalars | 1.3.6.1.4.1.3382.12.1.2.1.1 | ||||||||||||
| SvServerType | 1.3.6.1.4.1.3382.12.1.2.1.1.1 | Bits | RO | 80 0 | |||||||||
scalar · Bits · read-only · current Indicates whether the software is running as a client,
a vServer, or both.
Note: The BITS syntax describes an object implemented
as an OCTET STRING where each of the bits have a
meaning. So, vServerType will be returned as a single
octet. The most significant bit of this octet
indicates whether the system is a Venturi vServer
and the next bit indicates whether it is a client.
The value returned for a vServer will be x80, for
a client x40, and for a system acting as both client
and vServer xC0. The values in parentheses next to
'client' and 'vServer' in the definition above indicate
the bit number.
Example values from LibreNMS test devices
| |||||||||||||
| SvServerVersion | 1.3.6.1.4.1.3382.12.1.2.1.1.2 | OCTET STRING (SIZE (1..128)) | RO | 4.9.3 | |||||||||
scalar · OCTET STRING (SIZE (1..128)) · read-only · current Venturi software version string. This will normally be of the form X.Y.Z where X = major release number Y = minor release number Z = fix release number Example values from LibreNMS test devices
| |||||||||||||
| SvServerStartTime | 1.3.6.1.4.1.3382.12.1.2.1.1.3 | Integer32 | RO | 1740024819 | |||||||||
scalar · Integer32 · read-only · current Time the Venturi software started execution in seconds since midnight, January 1, 1970 GMT. Example values from LibreNMS test devices
| |||||||||||||
| SvServerUpTime | 1.3.6.1.4.1.3382.12.1.2.1.1.4 | TimeTicks | RO | 680213000 (78d 17h 28m 50s) | |||||||||
scalar · TimeTicks · read-only · current Time since the Venturi software was started. This will often be the time since last boot, but may be shorter if the Venturi software was restarted for some reason, such as to clear an error condition. The units of this object are TimeTicks, which are 1/100 of a second. Example values from LibreNMS test devices
| |||||||||||||
| SvServerBuildId | 1.3.6.1.4.1.3382.12.1.2.1.1.5 | OCTET STRING (SIZE (1..128)) | RO | 98 | |||||||||
scalar · OCTET STRING (SIZE (1..128)) · read-only · current The software build identifier. General releases normally use a build number as the value for this object, but this value is not guaranteed to be numeric in all cases. It may include alpha characters to indicate special builds. Example values from LibreNMS test devices
| |||||||||||||
| SvServerMaxClients | 1.3.6.1.4.1.3382.12.1.2.1.1.6 | Integer32 | RO | 1000 | |||||||||
scalar · Integer32 · read-only · current This is the maximum number of simultaneous client connections supportable by this server. Attempts to connect clients in excess of this number will be rejected. A count of the number of such rejections is available in the object vServerClientLimitExceeded in the VENTURI-STATS-MIB. Example values from LibreNMS test devices
| |||||||||||||
| SvServerMaxClientless | 1.3.6.1.4.1.3382.12.1.2.1.1.7 | Integer32 | RO | 1500 | |||||||||
scalar · Integer32 · read-only · current Maximum number of simultaneous clientless connections supportable by this server. Example values from LibreNMS test devices
| |||||||||||||
| SvServerSerialNumber | 1.3.6.1.4.1.3382.12.1.2.1.1.8 | OCTET STRING (SIZE (1..128)) | RO | 1000 | |||||||||
scalar · OCTET STRING (SIZE (1..128)) · read-only · current Opaque string uniquely identifying the server. Example values from LibreNMS test devices
| |||||||||||||
| SvServerNumCPUs | 1.3.6.1.4.1.3382.12.1.2.1.1.9 | Integer32 | RO | 4 | |||||||||
scalar · Integer32 · read-only · current Number of physical CPUs in this server. Due to technologies used by CPU manufacturers, this may be less than the number of logical CPUs. Example values from LibreNMS test devices
| |||||||||||||
| SvServerMaxTcpBandwidth | 1.3.6.1.4.1.3382.12.1.2.1.1.10 | Integer32 | RO | 300000000 | |||||||||
scalar · Integer32 · read-only · current Maximum TCP bandwidth. Example values from LibreNMS test devices
| |||||||||||||
| SvServerClientUpdateVersion | 1.3.6.1.4.1.3382.12.1.2.1.1.11 | DisplayString | RO | | |||||||||
scalar · DisplayString · read-only · current If set, clients below this version should be upgraded. Example values from LibreNMS test devices
| |||||||||||||
| SvServerMemoryRAM | 1.3.6.1.4.1.3382.12.1.2.1.1.12 | Integer32 | RO | 16468168 | |||||||||
scalar · Integer32 · read-only · current The amount of RAM.
Example values from LibreNMS test devices
| |||||||||||||
| SvServerMemorySwap | 1.3.6.1.4.1.3382.12.1.2.1.1.13 | Integer32 | RO | 0 | |||||||||
scalar · Integer32 · read-only · current The amout of swap space.
Example values from LibreNMS test devices
| |||||||||||||
| NvServerGeneralTables | 1.3.6.1.4.1.3382.12.1.2.1.2 | ||||||||||||
| TvServerCPUTable | 1.3.6.1.4.1.3382.12.1.2.1.2.1 | NA | |||||||||||
table · not-accessible · current A table of information about the physical CPUs of the system. | |||||||||||||
| RvServerCPUEntry | 1.3.6.1.4.1.3382.12.1.2.1.2.1.1 | NA | |||||||||||
| CvServerCPUId | 1.3.6.1.4.1.3382.12.1.2.1.2.1.1.1 | Integer32 (1..16) | RO | ||||||||||
column · Integer32 (1..16) · read-only · current A number identifying the CPU. | |||||||||||||
| CvServerCPUClockSpeed | 1.3.6.1.4.1.3382.12.1.2.1.2.1.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The clock speed of the CPU.
| |||||||||||||
| CvServerCPUCacheSize | 1.3.6.1.4.1.3382.12.1.2.1.2.1.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The size of the CPU's on-board cache in kilobytes.
| |||||||||||||
| CvServerCPUVendorName | 1.3.6.1.4.1.3382.12.1.2.1.2.1.1.4 | OCTET STRING (SIZE (1..32)) | RO | ||||||||||
column · OCTET STRING (SIZE (1..32)) · read-only · current The CPU's Manufacturer. | |||||||||||||
| CvServerCPUModelName | 1.3.6.1.4.1.3382.12.1.2.1.2.1.1.5 | OCTET STRING (SIZE (1..64)) | RO | ||||||||||
column · OCTET STRING (SIZE (1..64)) · read-only · current The CPU's model name. | |||||||||||||
| TvServerStorageTable | 1.3.6.1.4.1.3382.12.1.2.1.2.2 | NA | |||||||||||
table · not-accessible · current A table of information about the physical Storages of the system. | |||||||||||||
| RvServerStorageEntry | 1.3.6.1.4.1.3382.12.1.2.1.2.2.1 | NA | |||||||||||
| CvServerStorageId | 1.3.6.1.4.1.3382.12.1.2.1.2.2.1.1 | Integer32 (1..16) | RO | ||||||||||
column · Integer32 (1..16) · read-only · current A number identifying the storage device. | |||||||||||||
| CvServerStorageDeviceName | 1.3.6.1.4.1.3382.12.1.2.1.2.2.1.2 | OCTET STRING (SIZE (1..64)) | RO | ||||||||||
column · OCTET STRING (SIZE (1..64)) · read-only · current The Storage's Manufacturer. | |||||||||||||
| CvServerStorageModelName | 1.3.6.1.4.1.3382.12.1.2.1.2.2.1.3 | OCTET STRING (SIZE (1..32)) | RO | ||||||||||
column · OCTET STRING (SIZE (1..32)) · read-only · current The Storage's model name. | |||||||||||||
| CvServerStorageSize | 1.3.6.1.4.1.3382.12.1.2.1.2.2.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The size of the Storage's on-board cache in kilobytes.
| |||||||||||||
| NvServerAlarms | 1.3.6.1.4.1.3382.12.1.2.2 | ||||||||||||
| NvServerAlarmScalars | 1.3.6.1.4.1.3382.12.1.2.2.1 | ||||||||||||
| NvServerAlarmTables | 1.3.6.1.4.1.3382.12.1.2.2.2 | ||||||||||||
| TvServerConditionTable | 1.3.6.1.4.1.3382.12.1.2.2.2.1 | NA | |||||||||||
table · not-accessible · current A table of reportable conditions. The entry into or exit from one of these conditions may be reported in a number of ways, including an entry in the log file, a syslog event, an SNMP trap and/or and email message. (See the vServerAlertRoutingTbl in the VENTURI-SERVER-CONFIG-MIB for the current alert routing.) Note that the alerts tied to conditions in this table are grouped into set/clear pairs. There are also informational alerts which are not tied to these conditions and merely report the occurance of some event. | |||||||||||||
| RvServerConditionEntry | 1.3.6.1.4.1.3382.12.1.2.2.2.1.1 | NA | |||||||||||
| CvServerConditionType | 1.3.6.1.4.1.3382.12.1.2.2.2.1.1.1 | VenturiConditionType | RO | ||||||||||
column · VenturiConditionType · read-only · current A number identifying the condition by its row number in the Condition Table. | |||||||||||||
| CvServerConditionSetTrapNum | 1.3.6.1.4.1.3382.12.1.2.2.2.1.1.2 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This is the SNMP trap number associated with entering the condition. Condition alerts are in SET/CLEAR pairs. This is the trap number associated with the SET. | |||||||||||||
| CvServerConditionClearTrapNum | 1.3.6.1.4.1.3382.12.1.2.2.2.1.1.3 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This is the SNMP trap number associated with exiting the condition. Condition alerts are in SET/CLEAR pairs. This is the trap number associated with the CLEAR. | |||||||||||||
| CvServerConditionState | 1.3.6.1.4.1.3382.12.1.2.2.2.1.1.4 | VenturiConditionState | RO | ||||||||||
column · VenturiConditionState · read-only · current The state of the condition. A value of yes(2) indicates the condition is in the SET state. A value of no(1) indicates the condition is in the CLEAR state. Polling this object can be used as an alternative to receiving SET and CLEAR traps, or it can be used to verify the state of the condition periodically in case a trap may have been missed. (SNMP traps are sent in UDP datagrams which are inherently unreliable.) | |||||||||||||
| CvServerConditionThresholdApplicable | 1.3.6.1.4.1.3382.12.1.2.2.2.1.1.5 | VenturiBooleanType | RO | ||||||||||
column · VenturiBooleanType · read-only · current A yes(2) value for this object indicates the condition represented by that row in the table is governed by the high and low thresholds in that table row. A no(1) value indicates the thresholds in that row of the Condition Table are not relevant to the triggering or clearing of that condition. | |||||||||||||
| CvServerConditionHighThreshold | 1.3.6.1.4.1.3382.12.1.2.2.2.1.1.6 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current Represents the high threshold of the condition. If threshold is not applicable, the value will be 0. | |||||||||||||
| CvServerConditionLowThreshold | 1.3.6.1.4.1.3382.12.1.2.2.2.1.1.7 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current Represents the low threshold of the condition. If threshold is not applicable, the value will be 0. | |||||||||||||
| CvServerConditionCurValue | 1.3.6.1.4.1.3382.12.1.2.2.2.1.1.8 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Represents the current value of the measure tested against the thresholds to set or clear this condition. If threshold is not applicable, the value will be 0. | |||||||||||||
| CvServerConditionSetSeverity | 1.3.6.1.4.1.3382.12.1.2.2.2.1.1.9 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current Represents the trap severity configured for the set trap for this condition. Do not confuse this with the log priority for this event, which is compared against the overall log threshold to decide whether to generate an alert when this condition enters the SET state. This object merely indicates the value that will be sent as the varbind 'trapServerity' with the SET trap for this condition. | |||||||||||||
| NvServerActions | 1.3.6.1.4.1.3382.12.1.2.3 | ||||||||||||
| NvServerActionScalars | 1.3.6.1.4.1.3382.12.1.2.3.1 | ||||||||||||
| SvServerActionReboot | 1.3.6.1.4.1.3382.12.1.2.3.1.1 | VenturiBooleanType | RW | ||||||||||
scalar · VenturiBooleanType · read-write · current Set to yes(2) to trigger a server reboot. | |||||||||||||
| SvServerActionPushNow | 1.3.6.1.4.1.3382.12.1.2.3.1.2 | VenturiBooleanType | RW | ||||||||||
scalar · VenturiBooleanType · read-write · current Set to yes(2) to trigger a push of all files ready for push to an FTP or SCP server. | |||||||||||||
| SvServerActionSendTestTrap | 1.3.6.1.4.1.3382.12.1.2.3.1.3 | VenturiBooleanType | RW | ||||||||||
scalar · VenturiBooleanType · read-write · current Set to yes(2) to send an SNMP test trap. | |||||||||||||
| SvServerActionSendAllTraps | 1.3.6.1.4.1.3382.12.1.2.3.1.4 | VenturiBooleanType | RW | ||||||||||
scalar · VenturiBooleanType · read-write · current Set to yes(2) to send test versions of all traps in the Venturi Trap MIB currently supported on the server. | |||||||||||||
| SvServerActionSendEnabledTraps | 1.3.6.1.4.1.3382.12.1.2.3.1.5 | VenturiBooleanType | RW | ||||||||||
scalar · VenturiBooleanType · read-write · current Set to yes(2) to send test versions of all traps in the Venturi Trap MIB which would be sent at currently configured priorities. In the Venturi server, all traps are generated from logs. Each log has a configured priority which is compared against a configured log threshold before recording. This object will cause traps to be sent only if the associated log would be recorded. The intention is to give the user a way to check that priorities and threshold are configured as intended. | |||||||||||||
| NvServerActionTables | 1.3.6.1.4.1.3382.12.1.2.3.2 | ||||||||||||
| TvServerFscOverrideTable | 1.3.6.1.4.1.3382.12.1.2.3.2.1 | NA | |||||||||||
table · not-accessible · current This is a single row table grouping together the Client Id identifying the row in the vServerClientInfoTable and the new Fsc value for that row. | |||||||||||||
| RvServerFscOverrideEntry | 1.3.6.1.4.1.3382.12.1.2.3.2.1.1 | NA | |||||||||||
| CvServerFscOverrideRowId | 1.3.6.1.4.1.3382.12.1.2.3.2.1.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current The row number in this table. | |||||||||||||
| CvServerFscOverrideClientId | 1.3.6.1.4.1.3382.12.1.2.3.2.1.1.2 | DisplayString (SIZE (0..16)) | RW | ||||||||||
column · DisplayString (SIZE (0..16)) · read-write · current The Client Id identifying the row in the ClientInfo table. | |||||||||||||
| CvServerFscOverrideFsc | 1.3.6.1.4.1.3382.12.1.2.3.2.1.1.3 | DisplayString (SIZE (0..16)) | RW | ||||||||||
column · DisplayString (SIZE (0..16)) · read-write · current The new Fsc value to apply to the row in the vServerClientInfoTable idicated by the Client Id. | |||||||||||||