UHP-MIB
Ipace Inc.UHP terminal MIB
snmptranslate -m UHP-MIB -Tpsnmpwalk -v2c -c <community> -m UHP-MIB <host> 1.3.6.1.4.1.8000.22Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nuhp | 1.3.6.1.4.1.8000 | ||||||||||||
| IuhpV32 | 1.3.6.1.4.1.8000.22 | ||||||||||||
identity UHP terminal MIB | |||||||||||||
| Ncontrol | 1.3.6.1.4.1.8000.22.1 | ||||||||||||
| SsaveConfig | 1.3.6.1.4.1.8000.22.1.1 | INTEGER | RW | nosave(0) | |||||||||
scalar · INTEGER · read-write · current Save current profile to EEPROM profile 0-3. Profile 0 is automativally loaded on restart by default.
Example values from LibreNMS test devices
| |||||||||||||
| Sreboot | 1.3.6.1.4.1.8000.22.1.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Reboot device immediately.
| |||||||||||||
| Scommand | 1.3.6.1.4.1.8000.22.1.3 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Issue a command to command-line interface. | |||||||||||||
| SconfigEdit | 1.3.6.1.4.1.8000.22.1.4 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Profile or global config editing and viewing Complex input format, only for manufacturer. | |||||||||||||
| Sprofile | 1.3.6.1.4.1.8000.22.1.5 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Get current profile or run specified profile (1-8). | |||||||||||||
| Ndemod1 | 1.3.6.1.4.1.8000.22.2 | ||||||||||||
| SlbandSNR1 | 1.3.6.1.4.1.8000.22.2.1 | Gauge32 | RO | 135 | |||||||||
scalar · Gauge32 · read-only · current Signal to noise ratio at L-band demodulator input measured in 0.1 dB units. Example values from LibreNMS test devices
| |||||||||||||
| SlbandOffset1 | 1.3.6.1.4.1.8000.22.2.2 | Integer32 | RO | 2 | |||||||||
scalar · Integer32 · read-only · current Frequency offset value in KHz between PLL frequency and carrier real frequency. Example values from LibreNMS test devices
| |||||||||||||
| SinLvl1 | 1.3.6.1.4.1.8000.22.2.3 | Gauge32 | RO | 119 | |||||||||
scalar · Gauge32 · read-only · current Current input level x -10dBm Example values from LibreNMS test devices
| |||||||||||||
| SinBytes1 | 1.3.6.1.4.1.8000.22.2.4 | Counter32 | RO | 4048928876 | |||||||||
scalar · Counter32 · read-only · current Demodulator1 traffic in bytes (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| Ndemod2 | 1.3.6.1.4.1.8000.22.3 | ||||||||||||
| SlbandSNR2 | 1.3.6.1.4.1.8000.22.3.1 | Gauge32 | RO | 0 | |||||||||
scalar · Gauge32 · read-only · current Signal to noise ratio at L-band demodulator input measured in 0.1 dB units. Example values from LibreNMS test devices
| |||||||||||||
| SlbandOffset2 | 1.3.6.1.4.1.8000.22.3.2 | Integer32 | RO | -50687 | |||||||||
scalar · Integer32 · read-only · current Frequency offset value in KHz between PLL frequency and carrier real frequency. Example values from LibreNMS test devices
| |||||||||||||
| SinLvl2 | 1.3.6.1.4.1.8000.22.3.3 | Gauge32 | RO | 80 | |||||||||
scalar · Gauge32 · read-only · current Current input level x -10dBm Example values from LibreNMS test devices
| |||||||||||||
| SinBytes2 | 1.3.6.1.4.1.8000.22.3.4 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Demodulator2 traffic in bytes (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| Nmodulator | 1.3.6.1.4.1.8000.22.4 | ||||||||||||
| NprioAll | 1.3.6.1.4.1.8000.22.4.1 | ||||||||||||
| SoutBytesA | 1.3.6.1.4.1.8000.22.4.1.1 | Counter32 | RO | 38656628 | |||||||||
scalar · Counter32 · read-only · current Modulator traffic in bytes (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SoutPktsA | 1.3.6.1.4.1.8000.22.4.1.2 | Counter32 | RO | 354999 | |||||||||
scalar · Counter32 · read-only · current Modulator traffic in packets (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SdropsA | 1.3.6.1.4.1.8000.22.4.1.3 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator dropped packets (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SqueueLenBA | 1.3.6.1.4.1.8000.22.4.1.4 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator queue length in bytes (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SqueueLenPA | 1.3.6.1.4.1.8000.22.4.1.5 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator queue length in packets (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SnumStations | 1.3.6.1.4.1.8000.22.4.1.6 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Number of stations per ACM channel (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| NprioP1 | 1.3.6.1.4.1.8000.22.4.2 | ||||||||||||
| SoutBytesP1 | 1.3.6.1.4.1.8000.22.4.2.1 | Counter32 | RO | 38660033 | |||||||||
scalar · Counter32 · read-only · current Modulator P1(Low) priority traffic in bytes (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SoutPktsP1 | 1.3.6.1.4.1.8000.22.4.2.2 | Counter32 | RO | 355055 | |||||||||
scalar · Counter32 · read-only · current Modulator P1(Low) priority traffic in packets (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SdropsP1 | 1.3.6.1.4.1.8000.22.4.2.3 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P1(Low) priority dropped packets (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SqueueLenBP1 | 1.3.6.1.4.1.8000.22.4.2.4 | Counter32 | RO | 1181 | |||||||||
scalar · Counter32 · read-only · current Modulator P1(Low) priority queue length in bytes (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SqueueLenPP1 | 1.3.6.1.4.1.8000.22.4.2.5 | Counter32 | RO | 3 | |||||||||
scalar · Counter32 · read-only · current Modulator P1(Low) priority queue length in packets (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| NprioP4 | 1.3.6.1.4.1.8000.22.4.3 | ||||||||||||
| SoutBytesP4 | 1.3.6.1.4.1.8000.22.4.3.1 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P4(Med) priority traffic in bytes (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SoutPktsP4 | 1.3.6.1.4.1.8000.22.4.3.2 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P4(Med) priority traffic in packets (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SdropsP4 | 1.3.6.1.4.1.8000.22.4.3.3 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P4(Med) priority dropped packets (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SqueueLenBP4 | 1.3.6.1.4.1.8000.22.4.3.4 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P4(Med) priority queue length in bytes (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SqueueLenPP4 | 1.3.6.1.4.1.8000.22.4.3.5 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P4(Med) priority queue length in packets (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| NprioP7 | 1.3.6.1.4.1.8000.22.4.4 | ||||||||||||
| SoutBytesP7 | 1.3.6.1.4.1.8000.22.4.4.1 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P7(High) priority traffic in bytes (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SoutPktsP7 | 1.3.6.1.4.1.8000.22.4.4.2 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P7(High) priority traffic in packets (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SdropsP7 | 1.3.6.1.4.1.8000.22.4.4.3 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P7(High) priority dropped packets (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SqueueLenBP7 | 1.3.6.1.4.1.8000.22.4.4.4 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P7(High) priority queue length in bytes (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SqueueLenPP7 | 1.3.6.1.4.1.8000.22.4.4.5 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P7(High) priority queue length in packets (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| NprioCtrl | 1.3.6.1.4.1.8000.22.4.5 | ||||||||||||
| SoutBytesC | 1.3.6.1.4.1.8000.22.4.5.1 | Counter32 | RO | 132 | |||||||||
scalar · Counter32 · read-only · current Modulator control traffic in bytes (index 1 only) Example values from LibreNMS test devices
| |||||||||||||
| SoutPktsC | 1.3.6.1.4.1.8000.22.4.5.2 | Counter32 | RO | 1 | |||||||||
scalar · Counter32 · read-only · current Modulator control traffic in packets (index 1 only) Example values from LibreNMS test devices
| |||||||||||||
| Nlevel | 1.3.6.1.4.1.8000.22.4.6 | ||||||||||||
| StxLevel | 1.3.6.1.4.1.8000.22.4.6.1 | Gauge32 | RO | 259 | |||||||||
scalar · Gauge32 · read-only · current Current TX level x -10dBm Example values from LibreNMS test devices
| |||||||||||||
| StxLevelDelta | 1.3.6.1.4.1.8000.22.4.6.2 | Integer32 | RO | -21 | |||||||||
scalar · Integer32 · read-only · current Current TX level delta from set level x -10dBm Example values from LibreNMS test devices
| |||||||||||||
| StxMaxLevel | 1.3.6.1.4.1.8000.22.4.6.3 | Integer32 | RO | 250 | |||||||||
scalar · Integer32 · read-only · current Max TLC level x -10dBm Example values from LibreNMS test devices
| |||||||||||||
| NprioP2 | 1.3.6.1.4.1.8000.22.4.7 | ||||||||||||
| SoutBytesP2 | 1.3.6.1.4.1.8000.22.4.7.1 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P2 priority traffic in bytes (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SoutPktsP2 | 1.3.6.1.4.1.8000.22.4.7.2 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P2 priority traffic in packets (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SdropsP2 | 1.3.6.1.4.1.8000.22.4.7.3 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P2 priority dropped packets (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SqueueLenBP2 | 1.3.6.1.4.1.8000.22.4.7.4 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P2 priority queue length in bytes (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SqueueLenPP2 | 1.3.6.1.4.1.8000.22.4.7.5 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P2 priority queue length in packets (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| NprioP3 | 1.3.6.1.4.1.8000.22.4.8 | ||||||||||||
| SoutBytesP3 | 1.3.6.1.4.1.8000.22.4.8.1 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P3 priority traffic in bytes (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SoutPktsP3 | 1.3.6.1.4.1.8000.22.4.8.2 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P3 priority traffic in packets (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SdropsP3 | 1.3.6.1.4.1.8000.22.4.8.3 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P3 priority dropped packets (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SqueueLenBP3 | 1.3.6.1.4.1.8000.22.4.8.4 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P3 priority queue length in bytes (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SqueueLenPP3 | 1.3.6.1.4.1.8000.22.4.8.5 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P3 priority queue length in packets (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| NprioP5 | 1.3.6.1.4.1.8000.22.4.9 | ||||||||||||
| SoutBytesP5 | 1.3.6.1.4.1.8000.22.4.9.1 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P5 priority traffic in bytes (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SoutPktsP5 | 1.3.6.1.4.1.8000.22.4.9.2 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P5 priority traffic in packets (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SdropsP5 | 1.3.6.1.4.1.8000.22.4.9.3 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P5 priority dropped packets (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SqueueLenBP5 | 1.3.6.1.4.1.8000.22.4.9.4 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P5 priority queue length in bytes (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SqueueLenPP5 | 1.3.6.1.4.1.8000.22.4.9.5 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P5 priority queue length in packets (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| NprioP6 | 1.3.6.1.4.1.8000.22.4.10 | ||||||||||||
| SoutBytesP6 | 1.3.6.1.4.1.8000.22.4.10.1 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P6 priority traffic in bytes (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SoutPktsP6 | 1.3.6.1.4.1.8000.22.4.10.2 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P6 priority traffic in packets (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SdropsP6 | 1.3.6.1.4.1.8000.22.4.10.3 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P6 priority dropped packets (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SqueueLenBP6 | 1.3.6.1.4.1.8000.22.4.10.4 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P6 priority queue length in bytes (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| SqueueLenPP6 | 1.3.6.1.4.1.8000.22.4.10.5 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Modulator P6 priority queue length in packets (indexed by ACM channel) Example values from LibreNMS test devices
| |||||||||||||
| Ntdma | 1.3.6.1.4.1.8000.22.5 | ||||||||||||
| Ntts | 1.3.6.1.4.1.8000.22.5.1 | ||||||||||||
| Stdelta | 1.3.6.1.4.1.8000.22.5.1.1 | Integer32 | RO | -482073969 | |||||||||
scalar · Integer32 · read-only · current HUB/Outroute - TTS value Inroute/remote - Timers delta between local station and hub In 10MHz ticks. Developers only Example values from LibreNMS test devices
| |||||||||||||
| StdtConfidence | 1.3.6.1.4.1.8000.22.5.1.2 | Gauge32 | RO | 44 | |||||||||
scalar · Gauge32 · read-only · current HUB/Outroute - TTS confidence value 0-64 Inroute/remote - Tdelta confidence 0-64 Example values from LibreNMS test devices
| |||||||||||||
| SsoftErrors | 1.3.6.1.4.1.8000.22.5.1.3 | Counter32 | RO | 3 | |||||||||
scalar · Counter32 · read-only · current Number of soft errors of TTS/Tdelta measurement algorithm. Soft errors mean current value is outside averaged window. Example values from LibreNMS test devices
| |||||||||||||
| ShardErrors | 1.3.6.1.4.1.8000.22.5.1.4 | Counter32 | RO | 1 | |||||||||
scalar · Counter32 · read-only · current Number of hard errors of TTS/Tdelta measurement algorithm. Example values from LibreNMS test devices
| |||||||||||||
| ShubTTS | 1.3.6.1.4.1.8000.22.5.1.5 | Gauge32 | RO | 127391 | |||||||||
scalar · Gauge32 · read-only · current HUB TTS value in 10MHz ticks Example values from LibreNMS test devices
| |||||||||||||
| ShubTTSconfidence | 1.3.6.1.4.1.8000.22.5.1.6 | Gauge32 | RO | 64 | |||||||||
scalar · Gauge32 · read-only · current HUB TTS confidence value 0-64. It is requested from remotes or inroutes Example values from LibreNMS test devices
| |||||||||||||
| SremoteTTS | 1.3.6.1.4.1.8000.22.5.1.7 | Gauge32 | RO | 4294965151 | |||||||||
scalar · Gauge32 · read-only · current Remote TTS value with compensations in 10MHz ticks. Developers only Example values from LibreNMS test devices
| |||||||||||||
| Ninroute | 1.3.6.1.4.1.8000.22.5.2 | ||||||||||||
| SnetState | 1.3.6.1.4.1.8000.22.5.2.1 | INTEGER | RO | operation(17) | |||||||||
scalar · INTEGER · read-only · current Operation sequence level
Example values from LibreNMS test devices
| |||||||||||||
| SframeDelay | 1.3.6.1.4.1.8000.22.5.2.2 | Gauge32 | RO | 3 | |||||||||
scalar · Gauge32 · read-only · current Delay in frames between TX and RX processing. Developers only Example values from LibreNMS test devices
| |||||||||||||
| SsectionBW | 1.3.6.1.4.1.8000.22.5.2.3 | Gauge32 | RO | 11228 | |||||||||
scalar · Gauge32 · read-only · current Bandwidth in Bits/second of single slot in frame Example values from LibreNMS test devices
| |||||||||||||
| SnetRequest | 1.3.6.1.4.1.8000.22.5.2.4 | Gauge32 | RO | 0 | |||||||||
scalar · Gauge32 · read-only · current Sum of all requests of all stations (slots) Example values from LibreNMS test devices
| |||||||||||||
| SfreeSlots | 1.3.6.1.4.1.8000.22.5.2.5 | Gauge32 | RO | 0 | |||||||||
scalar · Gauge32 · read-only · current Number of free-allocated slots in current frame Example values from LibreNMS test devices
| |||||||||||||
| SnetLoad | 1.3.6.1.4.1.8000.22.5.2.6 | Gauge32 | RO | 0 | |||||||||
scalar · Gauge32 · read-only · current Network load in % (values, greater than 100% mean overload) Example values from LibreNMS test devices
| |||||||||||||
| Nserver | 1.3.6.1.4.1.8000.22.5.3 | ||||||||||||
| SserverStatus | 1.3.6.1.4.1.8000.22.5.3.1 | INTEGER | RO | operation(17) | |||||||||
scalar · INTEGER · read-only · current Server reply status
Example values from LibreNMS test devices
| |||||||||||||
| SframeDuration | 1.3.6.1.4.1.8000.22.5.3.2 | Gauge32 | RO | 0 | |||||||||
scalar · Gauge32 · read-only · current Frame duration in 10M ticks Example values from LibreNMS test devices
| |||||||||||||
| NremTable | 1.3.6.1.4.1.8000.22.5.4 | ||||||||||||
| SrxBytes | 1.3.6.1.4.1.8000.22.5.4.1 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Summary number of bytes, received from this remote | |||||||||||||
| Sp1Bytes | 1.3.6.1.4.1.8000.22.5.4.2 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of P1(Low) priority bytes, received from this remote | |||||||||||||
| Sp4Bytes | 1.3.6.1.4.1.8000.22.5.4.3 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of P4(Med) priority bytes, received from this remote | |||||||||||||
| Sp7Bytes | 1.3.6.1.4.1.8000.22.5.4.4 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of P7(High) priority bytes, received from this remote | |||||||||||||
| ScrcErrors | 1.3.6.1.4.1.8000.22.5.4.5 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of CRC errors, during reception of this remote | |||||||||||||
| ScarrierToNoise | 1.3.6.1.4.1.8000.22.5.4.6 | Gauge32 | RO | ||||||||||
scalar · Gauge32 · read-only · current Receive carrier-to-noise ratio of this remote in 0.1 dB steps | |||||||||||||
| SfreqOffset | 1.3.6.1.4.1.8000.22.5.4.7 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Receive Frequency offset of this remote in Hz | |||||||||||||
| SremRecvHub | 1.3.6.1.4.1.8000.22.5.4.8 | Gauge32 | RO | ||||||||||
scalar · Gauge32 · read-only · current How this remote receives the hub in 0.1 dB steps | |||||||||||||
| SlinkState | 1.3.6.1.4.1.8000.22.5.4.9 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Link state of this remote
| |||||||||||||
| SlastHeard | 1.3.6.1.4.1.8000.22.5.4.10 | Gauge32 | RO | ||||||||||
scalar · Gauge32 · read-only · current Time in seconds since last burst was received from remote. Developers only | |||||||||||||
| SdownTimes | 1.3.6.1.4.1.8000.22.5.4.11 | Gauge32 | RO | ||||||||||
scalar · Gauge32 · read-only · current How many times remote changed state to DOWN | |||||||||||||
| StotalRequest | 1.3.6.1.4.1.8000.22.5.4.12 | Gauge32 | RO | ||||||||||
scalar · Gauge32 · read-only · current Current non-real-time + real-time request from remote | |||||||||||||
| SnrtRequest | 1.3.6.1.4.1.8000.22.5.4.13 | Gauge32 | RO | ||||||||||
scalar · Gauge32 · read-only · current Current non-real-time request from remote | |||||||||||||
| SrtmRequest | 1.3.6.1.4.1.8000.22.5.4.14 | Gauge32 | RO | ||||||||||
scalar · Gauge32 · read-only · current Current real-time request from remote | |||||||||||||
| ScurrentFP | 1.3.6.1.4.1.8000.22.5.4.15 | Gauge32 | RO | ||||||||||
scalar · Gauge32 · read-only · current Number of sections, allocated in current frame plan for remote | |||||||||||||
| StxLvl | 1.3.6.1.4.1.8000.22.5.4.16 | Gauge32 | RO | ||||||||||
scalar · Gauge32 · read-only · current Current transmit level x -0.1 dBm (1:360 -> -0.1:-36 dBm) | |||||||||||||
| Sfaults | 1.3.6.1.4.1.8000.22.5.4.17 | Gauge32 | RO | ||||||||||
scalar · Gauge32 · read-only · current Station faults bitmap: 1-service monitoring local warning (LWRN);2-service monitoring local alarm (LFLT);4-service monitoring network warning (NWRN);8-service monitoring network alarm (NFLT);0x10 system fault (SYST);0x20 reboot fault (REBT);0x40 LAN down (LAN);0x80 RX offset fault (OFFS);0x100 CRC errors (CRC);0x200 TLC fault (TLC) | |||||||||||||
| Sp2Bytes | 1.3.6.1.4.1.8000.22.5.4.18 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of P2 priority bytes, received from this remote | |||||||||||||
| Sp3Bytes | 1.3.6.1.4.1.8000.22.5.4.19 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of P3 priority bytes, received from this remote | |||||||||||||
| Sp5Bytes | 1.3.6.1.4.1.8000.22.5.4.20 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of P5 priority bytes, received from this remote | |||||||||||||
| Sp6Bytes | 1.3.6.1.4.1.8000.22.5.4.21 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of P6 priority bytes, received from this remote | |||||||||||||
| Nstation | 1.3.6.1.4.1.8000.22.5.5 | ||||||||||||
| SstationState | 1.3.6.1.4.1.8000.22.5.5.1 | INTEGER | RO | operation(17) | |||||||||
scalar · INTEGER · read-only · current Remote initialization sequence level
Example values from LibreNMS test devices
| |||||||||||||
| SremnrtRequest | 1.3.6.1.4.1.8000.22.5.5.2 | Gauge32 | RO | 0 | |||||||||
scalar · Gauge32 · read-only · current Request for non-real-time bandwidth in sections Example values from LibreNMS test devices
| |||||||||||||
| SremrtRequest | 1.3.6.1.4.1.8000.22.5.5.3 | Gauge32 | RO | 0 | |||||||||
scalar · Gauge32 · read-only · current Request for real-time bandwidth in sections Example values from LibreNMS test devices
| |||||||||||||
| SfpLost | 1.3.6.1.4.1.8000.22.5.5.4 | Counter32 | RO | 4 | |||||||||
scalar · Counter32 · read-only · current Lost frame plans number Example values from LibreNMS test devices
| |||||||||||||
| SlvlOffset | 1.3.6.1.4.1.8000.22.5.5.5 | Integer32 | RO | 0 | |||||||||
scalar · Integer32 · read-only · current Offset between reference level and C/N level on hub. Developers only Example values from LibreNMS test devices
| |||||||||||||
| SlvlAdjust | 1.3.6.1.4.1.8000.22.5.5.6 | Gauge32 | RO | 4294967275 | |||||||||
scalar · Gauge32 · read-only · current TX power level adjustment value in 0.1 dB steps Example values from LibreNMS test devices
| |||||||||||||
| SfrqOffset | 1.3.6.1.4.1.8000.22.5.5.7 | Integer32 | RO | 0 | |||||||||
scalar · Integer32 · read-only · current Frequency offset on hub. Developers only Example values from LibreNMS test devices
| |||||||||||||
| SfrqAdjust | 1.3.6.1.4.1.8000.22.5.5.8 | Integer32 | RO | 0 | |||||||||
scalar · Integer32 · read-only · current TX frequency adjustment value in Hz. Developers only Example values from LibreNMS test devices
| |||||||||||||
| StimeOffset | 1.3.6.1.4.1.8000.22.5.5.9 | Integer32 | RO | -21457 | |||||||||
scalar · Integer32 · read-only · current Timing offset on hub in symbols Example values from LibreNMS test devices
| |||||||||||||
| StimeAdjust | 1.3.6.1.4.1.8000.22.5.5.10 | Integer32 | RO | -21457 | |||||||||
scalar · Integer32 · read-only · current TX timing adjustment value in 10M ticks Example values from LibreNMS test devices
| |||||||||||||
| Nrouter | 1.3.6.1.4.1.8000.22.6 | ||||||||||||
| SunroutedPkts | 1.3.6.1.4.1.8000.22.6.1 | Counter32 | RO | 5 | |||||||||
scalar · Counter32 · read-only · current Number of packets, router couldn't route anywhere (though they could have been tunneled). Example values from LibreNMS test devices
| |||||||||||||
| SunroutedSource | 1.3.6.1.4.1.8000.22.6.2 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current Last source IP address of unrouted packet. | |||||||||||||
| SunroutedDest | 1.3.6.1.4.1.8000.22.6.3 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current Last destination IP address of unrouted packet. | |||||||||||||
| SoutVlanBytes | 1.3.6.1.4.1.8000.22.6.4 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Number of bytes, transmitted via VLAN. Requires index, which is VLAN number. Example values from LibreNMS test devices
| |||||||||||||
| SinVlanBytes | 1.3.6.1.4.1.8000.22.6.5 | Counter32 | RO | 1612 | |||||||||
scalar · Counter32 · read-only · current Number of bytes, received via VLAN. Requires index, which is VLAN number. Example values from LibreNMS test devices
| |||||||||||||
| SoutSvlanBytes | 1.3.6.1.4.1.8000.22.6.6 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Number of bytes, transmitted via SVLAN. Requires index, which is SVLAN number. Example values from LibreNMS test devices
| |||||||||||||
| SinSvlanBytes | 1.3.6.1.4.1.8000.22.6.7 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Number of bytes, received via SVLAN. Requires index, which is SVLAN number. Example values from LibreNMS test devices
| |||||||||||||
| SinSvlanPackets | 1.3.6.1.4.1.8000.22.6.8 | Counter32 | RO | 0 | |||||||||
scalar · Counter32 · read-only · current Number of packets, received via SVLAN. Requires index, which is SVLAN number. Example values from LibreNMS test devices
| |||||||||||||
| Nshaper | 1.3.6.1.4.1.8000.22.7 | ||||||||||||
| SstreamSpeed | 1.3.6.1.4.1.8000.22.7.1 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Current speed in Kbits per second of current stream | |||||||||||||
| SstreamP1Speed | 1.3.6.1.4.1.8000.22.7.2 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Current speed in Kbits per second of P1(Low) priority sub-stream | |||||||||||||
| SstreamP4Speed | 1.3.6.1.4.1.8000.22.7.3 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Current speed in Kbits per second of P4(Med) priority sub-stream | |||||||||||||
| SstreamP7Speed | 1.3.6.1.4.1.8000.22.7.4 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Current speed in Kbits per second of P7(High) priority sub-stream | |||||||||||||
| SstreamDelay | 1.3.6.1.4.1.8000.22.7.5 | Gauge32 | RO | ||||||||||
scalar · Gauge32 · read-only · current Current packets delay in stream x 0.1s | |||||||||||||
| SstreamQueue | 1.3.6.1.4.1.8000.22.7.6 | Gauge32 | RO | ||||||||||
scalar · Gauge32 · read-only · current Current stream queue length in bytes | |||||||||||||
| SstreamP2Speed | 1.3.6.1.4.1.8000.22.7.7 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Current speed in Kbits per second of P2 priority sub-stream | |||||||||||||
| SstreamP3Speed | 1.3.6.1.4.1.8000.22.7.8 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Current speed in Kbits per second of P3 priority sub-stream | |||||||||||||
| SstreamP5Speed | 1.3.6.1.4.1.8000.22.7.9 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Current speed in Kbits per second of P5 priority sub-stream | |||||||||||||
| SstreamP6Speed | 1.3.6.1.4.1.8000.22.7.10 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Current speed in Kbits per second of P6 priority sub-stream | |||||||||||||
| Nsystem | 1.3.6.1.4.1.8000.22.8 | ||||||||||||
| Stemperature | 1.3.6.1.4.1.8000.22.8.1 | Integer32 | RO | 65 | |||||||||
scalar · Integer32 · read-only · current Current temperature Example values from LibreNMS test devices
| |||||||||||||
| ScpuLoad | 1.3.6.1.4.1.8000.22.8.2 | Gauge32 | RO | 14 | |||||||||
scalar · Gauge32 · read-only · current Current CPU load in percent Example values from LibreNMS test devices
| |||||||||||||
| Sbuffers | 1.3.6.1.4.1.8000.22.8.3 | Gauge32 | RO | 2 | |||||||||
scalar · Gauge32 · read-only · current Current buffers usage in percent Example values from LibreNMS test devices
| |||||||||||||
| Sredundancy | 1.3.6.1.4.1.8000.22.8.4 | INTEGER | RO | off(5) | |||||||||
scalar · INTEGER · read-only · current Current redundancy state
Example values from LibreNMS test devices
| |||||||||||||
| SswVersion | 1.3.6.1.4.1.8000.22.8.5 | Gauge32 | RO | 50724909 | |||||||||
scalar · Gauge32 · read-only · current Software version. Four numbers of version contained in four bytes in order of precedence (see as hexadecimal). Example values from LibreNMS test devices
| |||||||||||||
| SreleaseDate | 1.3.6.1.4.1.8000.22.8.6 | Gauge32 | RO | ||||||||||
scalar · Gauge32 · read-only · current Release date. Two low bytes of number contain year, then month and day (see as hexadecimal). | |||||||||||||
| Nmobile | 1.3.6.1.4.1.8000.22.9 | ||||||||||||
| Sversion | 1.3.6.1.4.1.8000.22.9.1 | Gauge32 | RO | ||||||||||
scalar · Gauge32 · read-only · current Software (protocol) version. Number 10 means V1.0 | |||||||||||||
| SserialNumber | 1.3.6.1.4.1.8000.22.9.2 | Gauge32 | RO | 1074225446 | |||||||||
scalar · Gauge32 · read-only · current Serial number of this unit. If printed on the screen should be printed as hexadecimal! Example - 4660 returned should be printed as 1234 in hex. Example values from LibreNMS test devices
| |||||||||||||
| SinputLevel | 1.3.6.1.4.1.8000.22.9.3 | Gauge32 | RO | 112 | |||||||||
| SrxState | 1.3.6.1.4.1.8000.22.9.4 | Gauge32 | RO | 136 | |||||||||
scalar · Gauge32 · read-only · current Composite value to provide controller with receive and overall state.
0 means no RX lock.
1 means absence of coordinates (send location data).
2 means absence of TX status (send TX control command).
3-250 means RX lock and shows demodulator C/N level in 0.1dBm
steps (e.g. 100 means C/N=10 dB).
Actual in all modes of operation. In SCPC/Star modes shows
SCPC demodulator level, in FullMesh mode burst demodulator level.Example values from LibreNMS test devices
| |||||||||||||
| SsearchState | 1.3.6.1.4.1.8000.22.9.5 | Gauge32 | RW | 0 | |||||||||
scalar · Gauge32 · read-write · current GET Value in percent (0-100) of current carrier search sequence. As search for narrow (<1Msps) carrier with high offset (DRO LNB) can last up-to 30 seconds, controller can wait until the whole acquisition bandwidth is scanned at least once. SET Writing any value restarts search cycle. Example values from LibreNMS test devices
| |||||||||||||
| StxControl | 1.3.6.1.4.1.8000.22.9.6 | Gauge32 | RW | 1 | |||||||||
scalar · Gauge32 · read-write · current GET Current TX status (0-off, 1-on). SET Writing 0 turns TX off, 1 - turns on. Example values from LibreNMS test devices
| |||||||||||||
| Slocation | 1.3.6.1.4.1.8000.22.9.7 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current GET Not applicable. SET NMEA RMC string $GPRMC,hhmmss.ss,A,GGMM.MM,P,gggmm.mm,J,v.v,b.b,ddmmyy,x.x,n,m*hh<CR><LF> Location should be re-supplied if changed more than 1 minute by any coordinate. | |||||||||||||