MIB Browser

UBQS-TC

Ubiquoss
Objects
0
Source
Show full MIB
snmptranslate -m UBQS-TC -Tp

Imports

SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIBits, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, PhysAddress, TEXTUAL-CONVENTION

The site cannot show an OID tree for this MIB. Use Show full MIB to read the MIB file.

Textual conventions

BulkConfigResult OCTET STRING (SIZE (0..255))
This textual convention defines the format of the
displayable textual result from the bulk configuration
operation specified as ConfigIterator type.

The format should be:
'COMPLETION=          error occured>/,
 ERROR=/:
 '

For example:
'COMPLETION=22/100,ERROR=38/44:Invalid Ds1 line coding
 for the line type'
ConfigIterator Unsigned32 (1..4294967295)
This object type is a control object type which applies to
writable objects in the same SNMP PDU related to the
same table containing those objects. It controls an
operation which repeatedly applies the specified
configuration data to more than one rows in a table.
The operation starts from the row specified by the index
of the instance and repeats for the number of rows as
the value of the object.

ConfigIterator object needs to be accompanied by one set of
writable objects which are of the same instance to apply to.

For example, a SNMP PDU contains
   { objectA.10 = 1,
     objectB.10 = 'E1',
     objectC.10 = 44,
     objectRepetition.10 = 100 }

The SYNTAX of objectRepetition is ConfigIterator.
This will apply value 1 to objectA, value 'E1' to objectB,
value 44 to objectC in the table starting from row 10
repeatedly for 100 rows.

The iteration is based on the number of rows, not based on
the value of the index. For sparse tables, the index 10,
20, 30, 110, and 120 counts for 5 rows, the operation will
go beyond index 100 in the previous SNMP PDU example.

The iteration will stop prematurely when it comes to the
following situations:
(1) When the number of the rows in the table is less than
    the designated row indicated by the ConfigIterator
    object.
(2) When it encounters the first error in any row, the
    operation won't continue to next row.

The operation of ConfigIterator object applies only to
the writable objects having the same index as the
ConfigIterator object in one SNMP PDU.

For example, a SNMP PDU contains
   { objectD.5 = 38,
     objectE.6 = 'T1',
     objectF.5 = 'false',
     objectIterator.5 = 10 }

The SYNTAX of objectIterator is ConfigIterator.
This will apply value 38 to objectD, value 'false' to
objectF in the table starting from row 5 repeatedly
for 10 rows. Since the object objectE.6 has different
index (6) from the index of objectIterator, the
repetition won't be applied to it. However the value
of objectE in the row 6 will be set to 'T1' according
to regular SNMP SET orperation.

If there is row overlapping of the iteration in a SNMP PDU,
it will be operated as they are in two different SNMP PDUs.

For example, a SNMP PDU contains
   { objectD.5 = 38,
     objectD.6 = 40,
     objectE.6 = 'T1',
     objectF.5 = 'false',
     objectIterator.5 = 10
     objectIterator.6 = 10 }

This will apply value 38 to objectD, value 'false' to
objectF starting from row 5 repeatedly for 10 rows, and
apply value 40 to objectD, value 'T1' to objectE starting
from row 6 repeatedly for 10 rows. The final value of
objectD.6 can be 38 or 40, it depends on the SNMP stack of
the system starts SNMP SET for the row 5 before the row 6
or the other way around.

The object defined as ConfigIterator will be set to value 1
after the iteration operation is kick-off regardless the
system has completed the operation to the designated rows
or not. Therefore retrieving the value of this object
is meaningless. It acts as the one time operation for
bulk configuration.

The object defined as ConfigIterator has no meaning by itself,
it has to be combined with one or more than one writable
objects from the same table and within the same SNMP PDU
for the repetition operation.

For example, a SNMP PDU contains
   { objectG.2 = 49,
     objectH.2 = 'AE'h
     objectIterator.4 = 20 }

The SYNTAX of objectIterator is ConfigIterator. Since
there are no objects having the same index as the index
of objectIterator in the PDU, the result of this SNMP
operation will set value 49 to objectG and value 0xAE
to objectH of the row 2 only as regular SNMP SET operation.

The index of the instance indicates the starting row for the
iteration.
The order of the iteration depends, for instance, on:
(1) physical hardware position, or
(2) logical index.

It depends on the characters of the table which contains
the ConfigIterator object.

Iteration can be done through some or all the components
of the index for a table. The description of the iterator
object in that table should describe which part of the
index the iteration is applied to.

The operation for this object type is based on the best
effort. When the agent receives a SNMP PDU containing this
data type, the return status of the SNMP request reflects
only the result of the SET operation has applied to the
starting row. It may return a SNMP response with SUCCESS
status regardless the number of rows for the data actually
been deployed later on. Therefore it is possible the data
might not be completely deployed to the number of rows
designated by the ConfigIterator and the operation stops
prematurely due to an error it first encounters after
n rows (n < the value of ConfigIterator object).

Usually the error report mechanism for this type of operation
is accomplished by combining this type of object with the
other two objects in the same table:

(1) An OwnerString object
(2) An object indicates the result of the operation.

When issuing this bulk configuration request, the SNMP
manager should provide its identifier in (1) object.
After issuing the request, it should check the value of (1)
object if it is the same with it own name.
If they are the same, then the value of the object presents
in (2) is the result from the previous operation from this
manager. Otherwise, another SNMP manager might issue
the bulk configuration to the same table before the previous
bulk operation has been completed. These two objects will
represent the last bulk operation in the table.
CountryCode OCTET STRING (SIZE (0 | 2))
Represents a case-insensitive 2-letter country code taken
from ISO-3166. Unrecognized countries are represented as
empty string.
CountryCodeITU Unsigned32 (0..255)
This textual convention represents a country or area code for
non-standard facilities in telematic services.
DlciNumber INTEGER (0..1023)
Numerical format of Data Link Connection Identifier
(DLCI) in decimal, identical to the 'DLCI' as INTEGER
of 0..DLCINumber in RFC1315. The maximum value depends
on Frame Relay implementation, which is currently set
to be 1023 for 2-octet address format per UNI
Implementation Agreement FRF.1.
Dscp INTEGER (0..63)
An integer that is in the range of the DiffServ codepoint
values.
EntPhysicalIndexOrZero Integer32 (0..2147483647)
This textual convention is an extension of entPhysicalIndex.
If non-zero, the object is an entPhysicalIndex. If zero, no
appropriate entPhysicalIndex exists. Any additional semantics
are object specific.
FcNameIdOrZero OCTET STRING (SIZE (0 | 8 | 16))
The World Wide Name (WWN) associated with a Fibre Channel
(FC) entity.  WWNs were initially defined as 64-bits in
length.  The latest definition (for future use) is 128-bits
long.  The zero-length string value is used in circumstances
where the WWN is unassigned/unknown.
IfOperStatusReason OCTET STRING (SIZE (0..256))
The cause of current operational state of the
interface.

GLOSSARY:

BB        - Buffer-to-Buffer.

BB_Credit - Buffer-to-Buffer credit, a link level flow
            control mechanism.

B_Port    - A Fibre Channel, Bridging port.

Class F   - A connectionless service with notification on
            non-delivery between E_Ports, used for control,
            coordination, and configuration of the Fabric.

Class N   - Refers to any class of service (different types
            of frame delivery services) other than Class F.

E_D_TOV   - Error Detect Timeout Value.

ELP       - Exchange Link Parameter.

E-mode    - A fibre channel port providing E_Port
            functionality.

E_Port    - A Fabric Expansion Port.

EPP       - Exchange Peer Parameters.

ESC       - Exchange Switch Capabilities.

Fabric    - The set of physically connected fibre channel
            switches.

FC-FS     - Fibre Channel Framing and Signaling.

FCIP      - Fibre Channel over IP protocol.

FCOT      - Fibre channel optical transmitter.

FC-PH     - The Fibre Channel Physical and Signaling
            standard.

FCSP      - Fibre Channel Security Protocol.

Fibre Channel - The primary protocol for building SANs.

FICON     - An I\O protocol used between IBM (and compatible)
            mainframes and storage.

FLOGI     - Fabric Login, used by a node port to establish a
            session with the fabric.

GBIC      - Gigabit Interface Converter; a removable
            transceiver module permitting Fibre Channel and
            Gigabit Ethernet physical-layer transport.

Interconnect_Ports - Switch Ports that assume either the
            E_Port or B_Port mode are generally referred to
            as Interconnect_Ports.

LIP       - Loop Initialization Primitive sequence.

LR        - Link Reset, the FC-PH defined primitive sequence
            used to initiate a link reset.

NOS       - Not Operational Sequence, the FC-PH defined
            primitive sequence to indicate that the
            transmitting port has detected a link failure (or)
            offline condition.

Nx_Port   - A Fiber Channel Node Port.

OLS       - Offline Sequence, the FC-PH defined primitive
            sequence to indicate that the port is entering
            into offline state.

OHMS      - Online Health Management System.

R_A_TOV   - Resource Allocation Timeout Value.

RCF       - Reconfigure Fabric.

Rxbbcredit - Receive BB credit value configured for
             a FC interface.

SAN       - Storage Area Network; a network linking computing
            devices to disk or tape arrays and other devices
            over Fibre Channel.

TE_Port   - Trunking E_Port.

TOV       - Time out value.

VSAN      - Virtual Storage Area Network.

WWN       - World Wide Name.

xE_Port   - A Fiber channel port that can assume either
            E_Port or TE_Port mode.

The enumerated values which provides the cause of the current
operational state of the interface are,

   'other(1)' - reasons other than defined here.

   'none(2)' - no failure.

   'hwFailure(3)' - hardware failure.

   'loopbackDiagFailure(4)' - loopback diagnostics failure.

   'errorDisabled(5)' - the port is not operational due to
       some error conditions that require administrative
       attention.

   'swFailure(6)' - software failure.

   'linkFailure(7)' - physical link failure.

   'offline(8)' -  physical link is in offline state as
       defined in the FC-FS standards.

   'nonParticipating(9)' - during loop initialization, the
       port is not allowed to participate in loop operations.

   'initializing(10)' - port is being initialized.

   'vsanInactive(11)'- port VSAN is inactive. The port becomes
       operational again when the port VSAN is active.

   'adminDown(12)' - ifAdminStatus is 'down'.

   'channelAdminDown(13)' - this port is a member of a port
       channel and that port channel's ifAdminStatus is
       'down'.

   'channelOperSuspended(14)' - this port is a member of a
       port channel and its operational parameters are
       incompatible with the port channel parameters.

   'channelConfigurationInProgress(15)' - this port is
       undergoing a port channel configuration.

   'rcfInProgress(16)' - an isolated xE_port is transmitting
       an reconfigure fabric, requesting a disruptive
       reconfiguration in an attempt to build a single,
       non-isolated fabric. Only the Interconnect_Ports can
       become isolated.

   'elpFailureIsolation(17)' - during a port initialization
       the prospective Interconnect_Ports find incompatible
       link parameters.

   'escFailureIsolation(18) - during a port initialization the
       prospective Interconnect_Ports are unable to proceed
       with initialization as a result of ESC.

   'domainOverlapIsolation(19)' - there is a overlap in
       domains while attempting to connect two existing
       fabrics.

   'domainAddrAssignFailureIsolation(20)' - the elected
       principal switch is not capable of performing domain
       address manager functions so no Nx_port traffic can be
       forwarded across switches, hence all Interconnect_Ports
       in the switch are isolated.

   'domainOtherSideEportIsolation(21)' - the peer E_port is
       isolated.

   'domainInvalidRcfReceived(22)' - invalid RCF received.

   'domainManagerDisabled(23) - domain manager is disabled.

   'zoneMergeFailureIsolation(24)' - the two Interconnect_Ports
       cannot merge zoning configuration after having exchanged
       merging request for zoning.

   'vsanMismatchIsolation(25)' - this VSAN is not configured
       on both sides of a trunk port.

   'parentDown(26)' - the physical port to which this interface
       is bound is down.

   'srcPortNotBound(27)'- no source port is specified for this
       interface.

   'interfaceRemoved(28)' - interface is being removed.

   'fcotNotPresent(29)' - FCOT (GBIC) not present.

   'fcotVendorNotSupported(30)' - FCOT (GBIC) vendor is not
       supported.

   'incompatibleAdminMode(31)' - port administrative mode is
       incompatible with port capabilities.

   'incompatibleAdminSpeed(32)' - port speed is incompatible
       with port capabilities.

   'suspendedByMode(33)' - port that belongs to a port channel
       is suspended due to incompatible operational mode.

   'suspendedBySpeed(34)' - port that belongs to a port channel
       is suspended due to incompatible operational speed.

   'suspendedByWwn(35)' - port that belongs to a port channel
       is suspended due to incompatible remote switch WWN.

   'domainMaxReTxFailure(36)' - domain manager failure after
       maximum retries.

   'eppFailure(37)' - trunk negotiation protocol failure after
       maximum retries.

   'portVsanMismatchIsolation(38)' - an attempt is made to
       connect two switches using non-trunking ports having
       different port VSANs.

   'loopbackIsolation(39)' - port is connected to another port
       in the same switch.

   'upgradeInProgress(40)' - linecard upgrade in progress.

   'incompatibleAdminRxBbCredit(41)' - receive BB credit is
       incompatible.
InterfaceIndexOrZero Integer32 (0..2147483647)
Either the value 0, or the ifIndex value of an
interface in the ifTable.
Layer2Cos Integer32 (0..7)
An integer that is in the range of the layer 2 CoS values. It
corresponds to the IEEE 802.1P CoS value which defines eight
(2^3) user priority levels.
Note: the IEEE 802.1P has been merged into IEEE 802.1D.
ListIndex Integer32 (1..2147483647)
A unique value greater than zero, for each of the
list that is defined. The object using this
convention should give all the object specific
details including the list type.
ListIndexOrZero Integer32 (0..2147483647)
This textual convention is an extension of the
ListIndex. In addition to the ListIndex range,
this also includes 0 in its range of values.
This value could be object specific and
should be given the description of that object.
In most cases, a value 0 means that the it does
not represent any lists.
MicroSeconds Unsigned32
Represents time unit value in microseconds.
Percent INTEGER (0..100)
An integer that is in the range of a percent value.
PerfHighIntervalCount Counter64
A 64 bit counter associated with a
performance measurement in a previous
15 minute measurement interval. In the
case where the agent has no valid data
available for a particular interval the
corresponding object instance is not
available and upon a retrieval request
a corresponding error message shall be
returned to indicate that this instance
does not exist (for example, a noSuchName
error for SNMPv1 and a noSuchInstance for
SNMPv2 GET operation).
In a system supporting
a history of n intervals with
IntervalCount(1) and IntervalCount(n) the
most and least recent intervals
respectively, the following applies at
the end of a 15 minute interval:
    - discard the value of IntervalCount(n)
    - the value of IntervalCount(i) becomes that
      of IntervalCount(i-1) for n >= i > 1
    - the value of IntervalCount(1) becomes that
      of CurrentCount
    - the TotalCount, if supported, is adjusted.

This definition is based on CounterBasedGauge64 TEXTUAL
CONVENTION  defined in RFC2856. The PerfHighIntervalCount
type represents a non-negative
integer, which may increase or decrease, but shall never
exceed a maximum value, nor fall below a minimum value. The
maximum value can not be greater than 2^64-1
(18446744073709551615 decimal), and the minimum value can
not be smaller than 0.  The value of a PerfHighIntervalCount,
has its maximum value whenever the information being modeled
is greater than or equal to its maximum value, and has its
minimum value whenever the information being modeled is
smaller than or equal to its minimum value.  If the
information being modeled subsequently decreases below
(increases above) the maximum (minimum) value, the
PerfHighIntervalCount also decreases (increases).

Note that this TC is not strictly supported in SMIv2,
because the 'always increasing' and 'counter wrap' semantics
associated with the Counter64 base type are not preserved.
It is possible that management applications which rely
solely upon the (Counter64) ASN.1 tag to determine object
semantics will mistakenly operate upon objects of this type
as they would for Counter64 objects.

This textual convention represents a limited and short-term
solution, and may be deprecated as a long term solution is
defined and deployed to replace it.
SAPType Integer32 (0..254)
Service Access Point - is a term that denotes the means
by which a user entity in layer n+1 accesses a service
of a provider entity in layer n.
TimeIntervalMin Unsigned32
A period of time, measured in units of 1 minute.
TimeIntervalSec Unsigned32
A period of time, measured in units of 1 second.
UbiAbsZeroBasedCounter32 Gauge32
This TC describes an object which counts events with the
following semantics: objects of this type will be set to
zero(0) on creation and will thereafter count appropriate
events, it locks at the maximum value of 4,294,967,295 if
the counter overflows.
This TC may be used only in situations where wrapping is
not possible or extremely unlikely situation.
UbiAlarmSeverity INTEGER

cleared(1) critical(3) indeterminate(2) info(7) major(4) minor(5) warning(6)

Represents the perceived alarm severity associated
with a service or safety affecting condition and/or
event.  These are based on ITU severities, except
that info(7) is added.

    cleared(1) -
        Indicates a previous alarm condition has been
        cleared.  It is not required (unless specifically
        stated elsewhere on a case by case basis) that an
        alarm condition that has been cleared will produce
        a notification or other event containing an
        alarm severity with this value.

    indeterminate(2) -
        Indicates that the severity level cannot be
        determined.

    critical(3) -
        Indicates that a service or safety affecting
        condition has occurred and an immediate
        corrective action is required.

    major(4) -
        Indicates that a service affecting condition has
        occurred and an urgent corrective action is
        required.

    minor(5) -
        Indicates the existence of a non-service affecting
        condition and that corrective action should be
        taken in order to prevent a more serious (for
        example, service or safety affecting) condition.

    warning(6) -
        Indicates the detection of a potential or impending
        service or safety affecting condition, before any
        significant effects have been felt.

    info(7) -
        Indicates an alarm condition that does not
        meet any other severity definition.  This can
        include important, but non-urgent, notices or
        informational events.
UbiBridgeId INTEGER

backbone(1001) default(1000)

Represents the bridge id.
bridge id : 1 ~ 32
default bridge (1000)
backbone(1001)
UbiInetAddressMask Unsigned32 (0..128)
Denotes a generic Internet subnet address mask.
The Internet subnet address mask is represented as the
number of contiguous 1-bit from MSB (most significant bit)
of the Internet subnet address mask.
A UbiInetAddressMask value is always interpreted within
the context of an InetAddressType value. The
InetAddressType only object or InetAddressType with
InetAddress objects which define the context must be
registered immediately before the object which uses the
UbiInetAddressMask textual convention.  In other words,
the object identifiers for the InetAddressType object and
the UbiInetAddressMask object MUST have the same length
and the last sub-identifier of the InetAddressType object
MUST be 1 less than the last sub-identifier of the
UbiInetAddressMask object and MUST be 2 less than the
last sub-identifier of the UbiInetAddressMask object if
an InetAddress object is defined between InetAddressType
and UbiInetAddressMask objects.
The maximum value of the UbiInetAddressMask TC is 32 for
the value 'ipv4(1)' in InetAddressType object and 128 for
the value 'ipv6(2)' in InetAddressType object.
The value zero is object-specific and must therefore be
defined as part of the description of any object which
uses this syntax.  Examples of the usage of zero might
include situations where Internet subnet mask was unknown,
or when none subnet masks need to be referenced.
UbiIpProtocol Integer32 (0..255)
IP protocol number range.
UbiLocationClass INTEGER

channel(7) chassis(1) port(5) shelf(2) slot(3) subChannel(8) subPort(6) subSlot(4)

An enumerated value which provides an indication of
the general location type of a particular physical and/or
logical interface.
chassis - a system framework for mounting one or more
          shelves/slots/cards.
shelf - a cabinet that holds one or more slots.
slot -  card or subSlot holder.
subSlot - daughter-card holder.
port - a physical port (e.g., a DS1 or DS3 physical port).
subPort - a logical port on a physical port (e.g., a DS1
          subPort on a DS3 physical port).
channel - a logical interface (e.g., a DS0 channel, signaling
          channel, ATM port, other virtual interfaces).
subChannel - a sub-channel on a logical interface.
UbiLocationSpecifier OCTET STRING (SIZE (0..255))
Use this TC to define objects that indicate the
physical entity and/or logical interface location
of a managed entity on a managed device. In SNMP, a
standard mechanism for indicating the physical location
of entities is via the ENTITY-MIB. However, that approach
is not satisfactory in some cases because:

1. The entity requiring a location-based naming may be
   associated with an entity which can not be represented
   as a physical entity in the ENTITY-MIB,
2. NMS applications may desire a more direct
   name/representation of a physical entity than is
   available via the ENTITY-MIB, e.g., a physical entity
   which is named via a hierarchy of levels in the ENTITY-MIB.

The value of an object defined using this TC is an ASCII
string consisting of zero or more elements separated by
commas. Each element is of the form  = .

An example of this syntax is 'slot=5,port=3'.

The syntax of the string is formally specified using
ABNF notation (with one exception, noted below), as
follows:

location-specifier =  elem *(',' elem)
               ; subject to
               ; size restriction specified in the SYNTAX
               ; clause below

elem    =   loctype '=' number

number  = %x00-FFFFFFFF / %d0-4294967295

loctype = 1*32VCHAR

It is recommended that loctype use one of the enumerated
labels defined for UbiLocationClass.

(NOTE: To conform to ABNF notation as defined in RFC2234,
 substitute the single-quote symbol with a double-quote
 symbol in the above rules.)

A zero length of UbiLocationSpecifier is object-specific
and must be defined as part of the description of any object
which uses this syntax.
UbiMilliSeconds Unsigned32
Represents time unit value in milliseconds.
UbiNetworkAddress OCTET STRING
Represents a network layer address.  The length and format of
the address is protocol dependent as follows:
ip        4 octets
decnet    2 octets
pup       obsolete
chaos     2 octets
xns       10 octets
          first 4 octets are the net number
          last 6 octets are the host number
x121
appletalk 3 octets
          first 2 octets are the net number
          last octet is the host number
clns
lat
vines     6 octets
          first 4 octets are the net number
          last 2 octets are the host number
cons
apollo    10 octets
          first 4 octets are the net number
          last 6 octets are the host number
stun      8 octets
novell    10 octets
          first 4 octets are the net number
          last 6 octets are the host number
qllc      6 octets
bstun     1 octet - bi-sync serial tunnel
snapshot  1 octet
atmIlmi   4 octets
x25 pvc   2 octets (12 bits)
ipv6      16 octets
cdm
nbf
bgpIgx
clnsPfx  upto 20 octets
http     upto 70 octets
         first 4 octets are the IPv4 host
         address
         next 2 octets are the TCP port
         number
         remaining(1 upto 64) octets are
         the URI
UbiNetworkProtocol INTEGER

apollo(12) appletalk(7) atmIlmi(17) bpxIgx(23) bstun(18) cdm(21) chaos(4) clns(8) clnsPfx(24) cons(11) decnet(2) http(25) ip(1) ipv6(20) lat(9) nbf(22) novell(14) pup(3) qllc(15) snapshot(16) stun(13) unknown(65535) vines(10) x121(6) x25pvc(19) xns(5)

Represents the different types of network layer protocols.
UbiPort Integer32 (0..65535)
The TCP or UDP port number range.
UbiPortList OCTET STRING (SIZE (0..256))
Each octet within this value specifies a set of eight
ports. The object defined by this textual convention
can specify a port range of 2k ports in its description.
Example: 1 - 2048, 2049 - 4096, etc. The first octet
represents the first 8 ports of the range of ports
specified by the object, the second octet represents
the next 8 ports, etc. When a port range is not
specified, a default port range of '1 - 2048' is assumed.

Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the
value of this object.  If that bit has a value of '1'
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'.

Note that if the length of this string is less than
256 octets, any 'missing' octets are assumed to contain
the value zero. An NMS may omit any zero-valued octets
from the end of this string in order to reduce SetPDU size,
and the agent may also omit zero-valued trailing octets,
to reduce the size of GetResponse PDUs.
UbiPortListRange INTEGER

eightKto10K(5) fourKto6K(3) fourteenKto16K(8) oneto2k(1) sixKto8K(4) tenKto12K(6) twelveKto14K(7) twoKto4K(2)

Indicates the port range.

oneto2K(1) indicates that the port number range is
from 1 to 2048.

twoKto4K(2) indicates that the port number range is
from 2049 to 4096.

fourKto6K(3) indicates that the port number range is
from 4097 to 6144.

sixKto8K(4) indicates that the port number range is
from 6145 to 8192.

eightKto10K(5) indicates that the port number range is
from 8193 to 10240.

tenKto12K(6) indicates that the port number range is
from 10241 to 12288.

twelveKto14K(7) indicates that the port number range is
from 12289 to 14336.

fourteenKto16K(8) indicates that the port number range is
from 14337 to 16384.

When an object is defined with this textual convention,
it must be accompanied by an object of UbiPortList
syntax.
UbiRowOperStatus INTEGER

active(1) activeDependencies(2) inactiveDependency(3) missingDependency(4)

Represents the operational status of an table entry.
This textual convention allows explicitly representing
the states of rows dependent on rows in other tables.

active(1) -
    Indicates this entry's RowStatus is active
    and the RowStatus for each dependency is active.

activeDependencies(2) -
    Indicates that the RowStatus for each dependency
    is active, but the entry's RowStatus is not active.

inactiveDependency(3) -
    Indicates that the RowStatus for at least one
    dependency is not active.

missingDependency(4) -
    Indicates that at least one dependency does
    not exist in it's table.
UbiSnapShotAbsCounter32 Unsigned32
This TC describes an object which stores a snap-shot value
with the following semantics: objects of this type will
take a snap-shot value from their associated
UbiAbsZeroBasedCounter32 type objects on creation.
Unsigned64 Counter64
An unsigned 64 bit integer. We use SYNTAX Counter64 for the
encoding rules.

Used by