UBQS-SLD-MIB
Premier Network Co., LtdThe UBQS-SLD-MIB is used for getting the information about self loop detect(SLD).
snmptranslate -m UBQS-SLD-MIB -Tpsnmpwalk -v2c -c <community> -m UBQS-SLD-MIB <host> 1.3.6.1.4.1.7800.100.25Imports
| IF-MIB | ifAdminStatus, ifIndex, ifName, ifOperStatus, ifType |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
| UBQS-SMI | ubiMgmtv2 |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IubiSldMIB | 1.3.6.1.4.1.7800.100.25 | |||
identity The UBQS-SLD-MIB is used for getting the information about self loop detect(SLD). | ||||
| NubiSldMIBNotificationPrefix | 1.3.6.1.4.1.7800.100.25.0 | |||
| !ubiSelfLoopDetectStateChange | 1.3.6.1.4.1.7800.100.25.0.1 | |||
notification · current When SLD status is changed, this notification is occured.
| ||||
| NubiSldMIBObjects | 1.3.6.1.4.1.7800.100.25.1 | |||
| NubiSldGlobal | 1.3.6.1.4.1.7800.100.25.1.1 | |||
| SubiSldEnabled | 1.3.6.1.4.1.7800.100.25.1.1.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current It is enable function of SLD. | ||||
| SubiSldHelloInterval | 1.3.6.1.4.1.7800.100.25.1.1.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current Global SLD hello interval.
| ||||
| SubiSldRecoveryTime | 1.3.6.1.4.1.7800.100.25.1.1.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Global SLD Recovery time.
| ||||
| SubiSldNotifyOnlyEnbaled | 1.3.6.1.4.1.7800.100.25.1.1.4 | TruthValue | RW | |
scalar · TruthValue · read-write · current It is enable Global function of only notification without SLD. | ||||
| SubiSldPortCheckEnabled | 1.3.6.1.4.1.7800.100.25.1.1.5 | TruthValue | RW | |
scalar · TruthValue · read-write · current It is enable global configuration of SLD without checking port. | ||||
| SubiSldIfStateChangeEnabled | 1.3.6.1.4.1.7800.100.25.1.1.6 | TruthValue | RW | |
scalar · TruthValue · read-write · current It is enable to sending SLD SNMP trap message | ||||
| TubiSldIfTable | 1.3.6.1.4.1.7800.100.25.1.2 | NA | ||
| RubiSldIfEntry | 1.3.6.1.4.1.7800.100.25.1.2.1 | NA | ||
row · not-accessible · current
| ||||
| CubiSldIfEnabled | 1.3.6.1.4.1.7800.100.25.1.2.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current It is enable to transmit SLD hello PDU in interface. | ||||
| CubiSldIfHelloInterval | 1.3.6.1.4.1.7800.100.25.1.2.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current It is changed SLD hello interval.
| ||||
| CubiSldIfRecoveryTime | 1.3.6.1.4.1.7800.100.25.1.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current When it is configured, if interface is disabled by SLD, interface automatically recover after recovery time.
| ||||
| CubiSldIfNotifyOnlyEnabled | 1.3.6.1.4.1.7800.100.25.1.2.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current When it is configured, if self-loop is detected, only notification is occured without disable interface. | ||||
| CubiSldIfPortCheckEnabled | 1.3.6.1.4.1.7800.100.25.1.2.1.5 | TruthValue | RW | |
column · TruthValue · read-write · current When it is enabled, if it receive SLD hello PDU of anothor interface, it regards SLD. | ||||
| CubiSldIfState | 1.3.6.1.4.1.7800.100.25.1.2.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Current interface status enable(1) : interface is active errDisable(2) : interface is disable by SLD.
| ||||
| CubiSldIfRecoveryMethod | 1.3.6.1.4.1.7800.100.25.1.2.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Last Recorvery status none(1) : none autoRecovery(2) : Auto recovery manualRecovery(3): Manual recoery
| ||||
| CubiSldIfLastStateChangeTime | 1.3.6.1.4.1.7800.100.25.1.2.1.8 | TimeStamp | RO | |
column · TimeStamp · read-only · current Last time of changing interface status by SLD. | ||||
| CubiSldIfErrorDisabledCount | 1.3.6.1.4.1.7800.100.25.1.2.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The number of occurence self-loop detection. | ||||
| CubiSldIfStateReset | 1.3.6.1.4.1.7800.100.25.1.2.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current It manually clear interface status by SLD. none(0) : Do nothing reset(1) : Clear interface.
| ||||
| NubiSldMIBConformance | 1.3.6.1.4.1.7800.100.25.2 | |||
| NubiSldMIBCompliances | 1.3.6.1.4.1.7800.100.25.2.1 | |||
| MubiSldMIBCompliance | 1.3.6.1.4.1.7800.100.25.2.1.1 | |||
compliance · current The compliance statement for entities which implement the UBQS-SLD-MIB
| ||||
| NubiSldMIBGroups | 1.3.6.1.4.1.7800.100.25.2.2 | |||
| NubiSldGroup | 1.3.6.1.4.1.7800.100.25.2.2.1 | |||
Traps / Notifications
- ubiSelfLoopDetectStateChange
1.3.6.1.4.1.7800.100.25.0.1