UBQS-MPLS-MIB
Premier Network Co., LtdThis MIB module defines the MPLS protocol.
snmptranslate -m UBQS-MPLS-MIB -Tpsnmpwalk -v2c -c <community> -m UBQS-MPLS-MIB <host> 1.3.6.1.4.1.7800.100.24.1Imports
| IF-MIB | InterfaceIndex |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressPrefixLength, InetAddressType |
| MPLS-TC-STD-MIB | MplsBitRate, MplsLSPID, MplsLabel, MplsOwner, mplsStdMIB |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, IpAddress, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
| UBQS-SMI | ubiMplsGroupMIB |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IubiMplsMIB | 1.3.6.1.4.1.7800.100.24.1 | |||
identity This MIB module defines the MPLS protocol. | ||||
| NubiMplsMIBNotificationPrefix | 1.3.6.1.4.1.7800.100.24.1.0 | |||
| NubiMplsMIBNotifications | 1.3.6.1.4.1.7800.100.24.1.0.1 | |||
| !ubiLspTraceSendCompletion | 1.3.6.1.4.1.7800.100.24.1.0.1.1 | |||
notification · current
| ||||
| NubiMplsMIBObjects | 1.3.6.1.4.1.7800.100.24.1.1 | |||
| NubiMplsGlobal | 1.3.6.1.4.1.7800.100.24.1.1.1 | |||
| TubiMplsInterfaceTable | 1.3.6.1.4.1.7800.100.24.1.1.2 | NA | ||
| RubiMplsInterfaceEntry | 1.3.6.1.4.1.7800.100.24.1.1.2.1 | NA | ||
row · not-accessible · current
| ||||
| CubiMplsIfLabelSpace | 1.3.6.1.4.1.7800.100.24.1.1.2.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current
| ||||
| TubiMplsFtnTable | 1.3.6.1.4.1.7800.100.24.1.1.3 | NA | ||
| RubiMplsFtnEntry | 1.3.6.1.4.1.7800.100.24.1.1.3.1 | NA | ||
row · not-accessible · current
| ||||
| CubiMplsFtnIndex | 1.3.6.1.4.1.7800.100.24.1.1.3.1.1 | Integer32 | NA | |
| CubiMplsFtnFecAddress | 1.3.6.1.4.1.7800.100.24.1.1.3.1.2 | IpAddress | RW | |
| CubiMplsFtnFecPrefixLen | 1.3.6.1.4.1.7800.100.24.1.1.3.1.3 | InetAddressPrefixLength | RW | |
| CubiMplsFtnTunnelId | 1.3.6.1.4.1.7800.100.24.1.1.3.1.4 | Integer32 | RC | |
| CubiMplsFtnOpcode | 1.3.6.1.4.1.7800.100.24.1.1.3.1.5 | UbiMplsOpcode | RO | |
column · UbiMplsOpcode · read-only · current This enumeration defines the operation code for MPLS.
The values are defined as follows:
other(0) - None of the following.
push(1) - Add a label onto the label stack.
pop(2) - The top label is removed.
swap(3) - The top label in the label stack
is replaced with another. | ||||
| CubiMplsFtnOutLabel | 1.3.6.1.4.1.7800.100.24.1.1.3.1.6 | MplsLabel | RW | |
| CubiMplsFtnOutIfIndex | 1.3.6.1.4.1.7800.100.24.1.1.3.1.7 | Integer32 | RW | |
| CubiMplsFtnNexthopAddress | 1.3.6.1.4.1.7800.100.24.1.1.3.1.8 | IpAddress | RW | |
| CubiMplsFtnOwner | 1.3.6.1.4.1.7800.100.24.1.1.3.1.9 | MplsOwner | RW | |
column · MplsOwner · read-write · current The values of this enumeration are defined as follows: unknown(1) - the local network management subsystem cannot discern which component created the object. other(2) - the local network management subsystem is able to discern which component created the object, but the component is not listed within the following choices, e.g., command line interface (cli). snmp(3) - The Simple Network Management Protocol was used to configure this object initially. ldp(4) - The Label Distribution Protocol was used to configure this object initially. crldp(5) - The Constraint-Based Label Distribution Protocol was used to configure this object initially. rsvpTe(6) - The Resource Reservation Protocol was used to configure this object initially. policyAgent(7) - A policy agent (perhaps in combination with one of the above protocols) was used to configure this object initially. An object created by any of the above choices MAY be modified or destroyed by the same or a different choice. | ||||
| CubiMplsFtnLspType | 1.3.6.1.4.1.7800.100.24.1.1.3.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current
| ||||
| CubiMplsFtnRowStatus | 1.3.6.1.4.1.7800.100.24.1.1.3.1.11 | RowStatus | RC | |
| TubiMplsIlmTable | 1.3.6.1.4.1.7800.100.24.1.1.4 | NA | ||
| RubiMplsIlmEntry | 1.3.6.1.4.1.7800.100.24.1.1.4.1 | NA | ||
row · not-accessible · current
| ||||
| CubiMplsIlmIndex | 1.3.6.1.4.1.7800.100.24.1.1.4.1.1 | Integer32 | NA | |
| CubiMplsIlmFecAddress | 1.3.6.1.4.1.7800.100.24.1.1.4.1.2 | IpAddress | RC | |
| CubiMplsIlmFecPrefixLen | 1.3.6.1.4.1.7800.100.24.1.1.4.1.3 | InetAddressPrefixLength | RC | |
| CubiMplsIlmOpcode | 1.3.6.1.4.1.7800.100.24.1.1.4.1.4 | UbiMplsOpcode | RO | |
column · UbiMplsOpcode · read-only · current This enumeration defines the operation code for MPLS.
The values are defined as follows:
other(0) - None of the following.
push(1) - Add a label onto the label stack.
pop(2) - The top label is removed.
swap(3) - The top label in the label stack
is replaced with another. | ||||
| CubiMplsIlmInLabel | 1.3.6.1.4.1.7800.100.24.1.1.4.1.5 | MplsLabel | RC | |
| CubiMplsIlmInIfIndex | 1.3.6.1.4.1.7800.100.24.1.1.4.1.6 | Integer32 | RC | |
| CubiMplsIlmOutLabel | 1.3.6.1.4.1.7800.100.24.1.1.4.1.7 | MplsLabel | RC | |
| CubiMplsIlmOutIfIndex | 1.3.6.1.4.1.7800.100.24.1.1.4.1.8 | Integer32 | RC | |
| CubiMplsIlmNexthopAddress | 1.3.6.1.4.1.7800.100.24.1.1.4.1.9 | IpAddress | RW | |
| CubiMplsIlmOwner | 1.3.6.1.4.1.7800.100.24.1.1.4.1.10 | MplsOwner | RO | |
column · MplsOwner · read-only · current The values of this enumeration are defined as follows: unknown(1) - the local network management subsystem cannot discern which component created the object. other(2) - the local network management subsystem is able to discern which component created the object, but the component is not listed within the following choices, e.g., command line interface (cli). snmp(3) - The Simple Network Management Protocol was used to configure this object initially. ldp(4) - The Label Distribution Protocol was used to configure this object initially. crldp(5) - The Constraint-Based Label Distribution Protocol was used to configure this object initially. rsvpTe(6) - The Resource Reservation Protocol was used to configure this object initially. policyAgent(7) - A policy agent (perhaps in combination with one of the above protocols) was used to configure this object initially. An object created by any of the above choices MAY be modified or destroyed by the same or a different choice. | ||||
| CubiMplsIlmLspType | 1.3.6.1.4.1.7800.100.24.1.1.4.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current
| ||||
| CubiMplsIlmRowStatus | 1.3.6.1.4.1.7800.100.24.1.1.4.1.12 | RowStatus | RC | |
| NubiMplsTrace | 1.3.6.1.4.1.7800.100.24.1.1.10 | |||
| NubiLspTraceSend | 1.3.6.1.4.1.7800.100.24.1.1.10.1 | |||
| SubiLspTraceSendFecType | 1.3.6.1.4.1.7800.100.24.1.1.10.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current
| ||||
| SubiLspTraceSendTargetType | 1.3.6.1.4.1.7800.100.24.1.1.10.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current
| ||||
| SubiLspTraceSendTarget | 1.3.6.1.4.1.7800.100.24.1.1.10.1.3 | OCTET STRING | RW | |
| SubiLspTraceSrcAddr | 1.3.6.1.4.1.7800.100.24.1.1.10.1.4 | OCTET STRING | RW | |
| SubiLspTraceSendForceExplicitNull | 1.3.6.1.4.1.7800.100.24.1.1.10.1.5 | TruthValue | RW | |
| SubiLspTraceSendExecute | 1.3.6.1.4.1.7800.100.24.1.1.10.1.15 | INTEGER | RW | |
scalar · INTEGER · read-write · current
| ||||
| NubiLspTraceResult | 1.3.6.1.4.1.7800.100.24.1.1.10.2 | |||
| SubiLspTraceSendCompleted | 1.3.6.1.4.1.7800.100.24.1.1.10.2.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current
| ||||
| TubiMplsTraceResultTable | 1.3.6.1.4.1.7800.100.24.1.1.10.2.2 | NA | ||
| RubiMplsTraceResultEntry | 1.3.6.1.4.1.7800.100.24.1.1.10.2.2.1 | NA | ||
row · not-accessible · current | ||||
| CubiLspTraceResultIndex | 1.3.6.1.4.1.7800.100.24.1.1.10.2.2.1.1 | Integer32 | NA | |
| CubiLspTraceResultInLabel | 1.3.6.1.4.1.7800.100.24.1.1.10.2.2.1.2 | MplsLabel | RO | |
| CubiLspTraceResultHopAddr | 1.3.6.1.4.1.7800.100.24.1.1.10.2.2.1.3 | InetAddress | RO | |
| NubiMplsMIBConformance | 1.3.6.1.4.1.7800.100.24.1.2 | |||
| NubiMplsMIBCompliances | 1.3.6.1.4.1.7800.100.24.1.2.1 | |||
| MubiMplsMIBCompliance | 1.3.6.1.4.1.7800.100.24.1.2.1.1 | |||
compliance · current The compliance statement for entities which implement the UBQS-MPLS-MIB
| ||||
| NubiMplsMIBGroups | 1.3.6.1.4.1.7800.100.24.1.2.2 | |||
| NubiMplsMIBGroup | 1.3.6.1.4.1.7800.100.24.1.2.2.1 | |||
Textual conventions
UbiMplsOpcodeINTEGERdlvr_to_ip(5)ftn_lookup(12)mpls_no_op(11)other(0)pop(2)pop_for_vc(9)pop_for_vpn(4)push(1)push_and_lookup(6)push_and_lookup_for_vc(8)push_for_vc(7)swap(3)swap_and_lookup(10)This enumeration defines the operation code for MPLS. The values are defined as follows: other(0) - None of the following. push(1) - Add a label onto the label stack. pop(2) - The top label is removed. swap(3) - The top label in the label stack is replaced with another.
Traps / Notifications
- ubiLspTraceSendCompletion
1.3.6.1.4.1.7800.100.24.1.0.1.1