UBQS-MPLS-LDP-MIB
Premier Network Co., Ltdsnmptranslate -m UBQS-MPLS-LDP-MIB -Tpsnmpwalk -v2c -c <community> -m UBQS-MPLS-LDP-MIB <host> 1.3.6.1.4.1.7800.100.24.3Imports
| IF-MIB | InterfaceIndex |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressPrefixLength, InetAddressType |
| MPLS-TC-STD-MIB | MplsLSPID, MplsOwner, MplsTunnelIndex, MplsTunnelInstanceIndex, TeHopAddressType, mplsStdMIB |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, IpAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
| UBQS-SMI | ubiMplsGroupMIB |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IubiLdpMIB | 1.3.6.1.4.1.7800.100.24.3 | |||
| NubiLdpMIBNotificationPrefix | 1.3.6.1.4.1.7800.100.24.3.0 | |||
| NubiLdpMIBObjects | 1.3.6.1.4.1.7800.100.24.3.1 | |||
| NubiLdpConfig | 1.3.6.1.4.1.7800.100.24.3.1.1 | |||
| SubiLdpEnable | 1.3.6.1.4.1.7800.100.24.3.1.1.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current Set the global attribute of LDP whether the LDP performs the operations. If this attribute is not set, then the LDP does not send any kinds of packets. | ||||
| SubiLdpRouterId | 1.3.6.1.4.1.7800.100.24.3.1.1.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current This entry set the router-id to the supplied IP address. The router uses this address to generate the LDP-ID. If you does not set this feild and the ubiLdpEnable attribute is enabled, then LDP Module automatically generate the LDP-ID. The algorithm for making ID is not covered in this description. please refer to RFC 5036 2.2.2. LDP Identifiers. | ||||
| SubiLdpFailoverCfmEnable | 1.3.6.1.4.1.7800.100.24.3.1.1.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current set the attribute of Connectivity Fault Management(CFM) in LDP. If you set this field, LDP creates the socket (AF_CFM) to detect whether the link associated with the peer is UP or DOWN. After set this attribute, You MUST enable the property for CFM in the interface which you want to check the connectivity. | ||||
| SubiLdpTargetedPeerHelloReceiptEnable | 1.3.6.1.4.1.7800.100.24.3.1.1.4 | TruthValue | RW | |
scalar · TruthValue · read-write · current Enable whether LDP accepts the packets from the targeted peer and cerate the instance for peer. If you want to configure the targeted-peer in network, then MUST enable this field at first. | ||||
| SubiLdpAcUpSignalEnable | 1.3.6.1.4.1.7800.100.24.3.1.1.5 | TruthValue | RW | |
scalar · TruthValue · read-write · current Enable the field to notify the interface of binded vpls to the neighbors for VPLS. If this is reset, then does not quickly send the signal to neighbors. | ||||
| SubiLdpExceedInitSessionNotiEnable | 1.3.6.1.4.1.7800.100.24.3.1.1.6 | TruthValue | RW | |
| SubiLdpPathVectorLimitMismatchNotiEnable | 1.3.6.1.4.1.7800.100.24.3.1.1.7 | TruthValue | RW | |
| SubiLdpLdpSessionUpDownNotiEnable | 1.3.6.1.4.1.7800.100.24.3.1.1.8 | TruthValue | RW | |
| TubiLdpInterfaceTable | 1.3.6.1.4.1.7800.100.24.3.1.2 | NA | ||
table · not-accessible · current This table specifies the LDP information for each interface. | ||||
| RubiLdpInterfaceEntry | 1.3.6.1.4.1.7800.100.24.3.1.2.1 | NA | ||
row · not-accessible · current A row in this table represents an LDP enable/disable status for each interface.
| ||||
| CubiLdpIfEnable | 1.3.6.1.4.1.7800.100.24.3.1.2.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current If this object is set to ipv4, ipv6, or both, then it is possible to transmit Hello packet through a specified interface. And LDP adjacencies and session can be created.
| ||||
| NubiLdpMIBConformance | 1.3.6.1.4.1.7800.100.24.3.2 | |||
| NubiLdpMIBCompliances | 1.3.6.1.4.1.7800.100.24.3.2.1 | |||
| MubiLdpMIBCompliance | 1.3.6.1.4.1.7800.100.24.3.2.1.1 | |||
compliance · current The compliance statement for entities which implement the UBQS-MPLS-LDP-MIB
| ||||
| NubiLdpMIBGroups | 1.3.6.1.4.1.7800.100.24.3.2.2 | |||
| GubiLdpMIBGroup | 1.3.6.1.4.1.7800.100.24.3.2.2.1 | |||
group · current A collection of objects containing information about the LDP information. | ||||