UBQS-INTERFACE-MIB
Premier Network Co., LtdA MIB module for the physical interface in IF-MIB (RFC2863).
snmptranslate -m UBQS-INTERFACE-MIB -Tpsnmpwalk -v2c -c <community> -m UBQS-INTERFACE-MIB <host> 1.3.6.1.4.1.7800.100.4Imports
| ENTITY-MIB | entPhysicalIndex |
|---|---|
| IF-MIB | InterfaceIndexOrZero, ifAdminStatus, ifIndex, ifName, ifOperStatus, ifType |
| Q-BRIDGE-MIB | VlanIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
| UBQS-SMI | ubiMgmtv2 |
| UBQS-TC | IfOperStatusReason, UbiBridgeId, UbiPortList, Unsigned64 |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IubiInterfaceMIB | 1.3.6.1.4.1.7800.100.4 | |||
identity A MIB module for the physical interface in IF-MIB (RFC2863). | ||||
| NubiInterfaceMIBNotificationPrefix | 1.3.6.1.4.1.7800.100.4.0 | |||
| NubiInterfaceNotifications | 1.3.6.1.4.1.7800.100.4.0.0 | |||
| !ubiPortAutoNegoFault | 1.3.6.1.4.1.7800.100.4.0.0.1 | |||
notification · current A ubiPortAutoNegoFault notification is sent at auto negotiation failure for a particular physical port.
| ||||
| NubiTrafficControlNotifications | 1.3.6.1.4.1.7800.100.4.0.1 | |||
| !ubiLoadMonitorRisingAlarm | 1.3.6.1.4.1.7800.100.4.0.1.1 | |||
notification · current A ubiLoadMonitorRisingAlarm notification is sent when the ubiLoadMonitorValue crosses its rising threshold. | ||||
| !ubiLoadMonitorFallingAlarm | 1.3.6.1.4.1.7800.100.4.0.1.2 | |||
notification · current A ubiLoadMonitorRisingAlarm notification is sent when the ubiLoadMonitorValue crosses its falling threshold. | ||||
| !ubiTrafficControlRisingAlarm | 1.3.6.1.4.1.7800.100.4.0.1.3 | |||
notification · current A ubiTrafficControlRisingAlarm is sent when ubiTrafficControlOneMinRate is greater than current threshold. | ||||
| !ubiTrafficControlFallingAlarm | 1.3.6.1.4.1.7800.100.4.0.1.4 | |||
notification · current A ubiTrafficControlFallingAlarm is sent when ubiTrafficControlOneMinRate is less than current threshold. | ||||
| NubiInterfaceMIBObjects | 1.3.6.1.4.1.7800.100.4.1 | |||
| NubiIfNotificationEnables | 1.3.6.1.4.1.7800.100.4.1.1 | |||
| NubiGrp1 | 1.3.6.1.4.1.7800.100.4.1.1.1 | |||
| SubiLinkUpDownEnabled | 1.3.6.1.4.1.7800.100.4.1.1.1.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current This variable indicates whether the system produces the notification of linkup/down. | ||||
| NubiGrp2 | 1.3.6.1.4.1.7800.100.4.1.1.2 | |||
| SubiPortAutoNegoFaultEnabled | 1.3.6.1.4.1.7800.100.4.1.1.2.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current This variable indicates whether the system produces the notification of the auto negotiation failure for a particular physical port. | ||||
| SubiLoadMonitorAlarmEnabled | 1.3.6.1.4.1.7800.100.4.1.1.2.2 | Bits | RW | |
scalar · Bits · read-write · current This variable indicates whether the system produces the notification of ubiLoadMonitorRisingAlarm and ubiLoadMonitorFallingAlarm.
| ||||
| SubiTrafficControlAlarmEnabled | 1.3.6.1.4.1.7800.100.4.1.1.2.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current This variable indicates whether the system produces the notification of ubiTrafficControlRisingAlarm and ubiTrafficControlFallingAlarm. | ||||
| TubiPortTable | 1.3.6.1.4.1.7800.100.4.1.2 | NA | ||
table · not-accessible · current This table contains objects which provide more information about physical interface. | ||||
| RubiPortEntry | 1.3.6.1.4.1.7800.100.4.1.2.1 | NA | ||
row · not-accessible · current An entry containing management information applicable to a particular physical interface.
| ||||
| CubiPortName | 1.3.6.1.4.1.7800.100.4.1.2.1.1 | DisplayString | RO | |
column · DisplayString · read-only · current The physical port name. | ||||
| CubiPortType | 1.3.6.1.4.1.7800.100.4.1.2.1.2 | PortType | RO | |
column · PortType · read-only · current The type of the physical port. | ||||
| CubiPortOperStatus | 1.3.6.1.4.1.7800.100.4.1.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The current operational status of the port. down(1) is down up(2) is up disable(3) is administratively down
| ||||
| CubiPortDuplex | 1.3.6.1.4.1.7800.100.4.1.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates whether the port is operating in half- duplex, full-duplex or auto negotiation mode.
| ||||
| CubiPortSpeed | 1.3.6.1.4.1.7800.100.4.1.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The current operational speed of the port.
| ||||
| CubiPortAdminDuplex | 1.3.6.1.4.1.7800.100.4.1.2.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The desired duplex of the port.
| ||||
| CubiPortAdminSpeed | 1.3.6.1.4.1.7800.100.4.1.2.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current The desired speed of the port.
| ||||
| CubiPortMtu | 1.3.6.1.4.1.7800.100.4.1.2.1.8 | Integer32 (1500..10218) | RW | |
column · Integer32 (1500..10218) · read-write · current The MTU value of the port. | ||||
| CubiPortL2L3IfState | 1.3.6.1.4.1.7800.100.4.1.2.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current The operational mode of the port whether the port is layer 2 or layer 3.
| ||||
| CubiPortAutoNegoFaultState | 1.3.6.1.4.1.7800.100.4.1.2.1.10 | INTEGER | AN | |
column · INTEGER · accessible-for-notify · current The link is down due to auto negotiation failure. This state indicates the state of auto negotiation failure for a particular port. But it's used for notification only.
| ||||
| CubiPortReset | 1.3.6.1.4.1.7800.100.4.1.2.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current Reset the physical port.
| ||||
| CubiPortLocalSwitching | 1.3.6.1.4.1.7800.100.4.1.2.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current Port local-switching
| ||||
| NubiPortExt | 1.3.6.1.4.1.7800.100.4.1.3 | |||
| TubiPortExtTable | 1.3.6.1.4.1.7800.100.4.1.3.1 | NA | ||
table · not-accessible · current This table contains objects which provide more information about physical interface. | ||||
| RubiPortExtEntry | 1.3.6.1.4.1.7800.100.4.1.3.1.1 | NA | ||
row · not-accessible · current An entry containing management information applicable to a particular physical interface.
| ||||
| CubiPortGBICStatus | 1.3.6.1.4.1.7800.100.4.1.3.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The current operational status of the equipped slot.
| ||||
| CubiPortGBICType | 1.3.6.1.4.1.7800.100.4.1.3.1.1.2 | PortGBICTypeList | RO | |
column · PortGBICTypeList · read-only · current The current GBIC Type of the equipped slot. none(0): unequipped other(1) : equipped, none of the following list sfp(2) xfp(3) sfp-plus(4) | ||||
| CubiPortGBICSerialNumber | 1.3.6.1.4.1.7800.100.4.1.3.1.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The serial number of this GBIC. | ||||
| NubiSwitchPort | 1.3.6.1.4.1.7800.100.4.1.4 | |||
| TubiSwitchportTable | 1.3.6.1.4.1.7800.100.4.1.4.1 | NA | ||
table · not-accessible · current A table contains the information for switchport. | ||||
| RubiSwitchportEntry | 1.3.6.1.4.1.7800.100.4.1.4.1.1 | NA | ||
| CubiSwitchportName | 1.3.6.1.4.1.7800.100.4.1.4.1.1.1 | DisplayString | RO | |
column · DisplayString · read-only · current A textual string containing information about the interface. | ||||
| CubiSwitchportMode | 1.3.6.1.4.1.7800.100.4.1.4.1.1.2 | UbiSwitchportType | RW | |
column · UbiSwitchportType · read-write · current A port type. The possible port types are:
customerVlanPort(0) - Indicates a port is a C-tag
aware port of an enterprise VLAN aware bridge.
providerNetworkPort(1) - Indicates a port is an S-tag
aware port of a Provider Bridge or Backbone Edge
Bridge used for connections within a PBN or PBBN.
customerNetworkPort(2) - Indicates a port is an S-tag
aware port of a Provider Bridge or Backbone Edge
Bridge used for connections to the exterior of a
PBN or PBBN.
customerEdgePort(3) - Indicates a port is a C-tag
aware port of a Provider Bridge used for connections
to the exterior of a PBN or PBBN.
customerBackbonePort(4) - Indicates a port is a I-tag
aware port of a Backbone Edge Bridge's B-component.
virtualInstancePort(5) - Indicates a port is a virtual
S-tag aware port within a Backbone Edge Bridge's
I-component which is responsible for handling
S-tagged traffic for a specific backbone service
instance.
dBridgePort(6) - Indicates a port is a VLAN-unaware
member of an 802.1D bridge.
access(7)
trunk(8)
hybrid(9) | ||||
| CubiSwitchportBridgeId | 1.3.6.1.4.1.7800.100.4.1.4.1.1.3 | UbiBridgeId | RW | |
column · UbiBridgeId · read-write · current This object is used to allocate the bridge group id. | ||||
| CubiSwitchportVlanNative | 1.3.6.1.4.1.7800.100.4.1.4.1.1.4 | VlanIndex | RW | |
column · VlanIndex · read-write · current The native vlan of a switchport. | ||||
| CubiSwitchportVlanDefault | 1.3.6.1.4.1.7800.100.4.1.4.1.1.5 | VlanIndex | RW | |
column · VlanIndex · read-write · current The default vlan of a switchport. | ||||
| TubiSwitchPortVlanControlTable | 1.3.6.1.4.1.7800.100.4.1.4.2 | NA | ||
table · not-accessible · current This table contains the control information of vlan for switchport. | ||||
| RubiSwitchPortVlanControlEntry | 1.3.6.1.4.1.7800.100.4.1.4.2.1 | NA | ||
| CubiSwitchportVlanTaggedSet | 1.3.6.1.4.1.7800.100.4.1.4.2.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The operational set of the switchport for a specific tagged vlan. If a value of set is all(4), the vlan index should be a zero.
| ||||
| CubiSwitchportVlanUntaggedSet | 1.3.6.1.4.1.7800.100.4.1.4.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The operational set of the switchport for a specific untagged vlan. If a value of set is all(4), the vlan index should be a zero.
| ||||
| CubiSwitchportVlanEgressTaggedSet | 1.3.6.1.4.1.7800.100.4.1.4.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The operational set of the switchport for a egress tagged vlan.
| ||||
| TubiSwitchVlanStackingTable | 1.3.6.1.4.1.7800.100.4.1.4.3 | NA | ||
table · not-accessible · current This table contains the stacking information of vlan for switchport. | ||||
| RubiSwitchVlanStackingEntry | 1.3.6.1.4.1.7800.100.4.1.4.3.1 | NA | ||
| CubiVlanStackingMode | 1.3.6.1.4.1.7800.100.4.1.4.3.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current vlan-stacking mode
| ||||
| CubiVlanStackingEthertype | 1.3.6.1.4.1.7800.100.4.1.4.3.1.2 | DisplayString | RW | |
column · DisplayString · read-write · current vlan-stacking ethertype (format : 0xhhhh) | ||||
| NubiPortTrafficControl | 1.3.6.1.4.1.7800.100.4.1.5 | |||
| TubiLoadMonitorTable | 1.3.6.1.4.1.7800.100.4.1.5.1 | NA | ||
table · not-accessible · current This table contains the information of load monitoring. | ||||
| RubiLoadMonitorEntry | 1.3.6.1.4.1.7800.100.4.1.5.1.1 | NA | ||
row · not-accessible · current A list of load monitoring configuration.
| ||||
| CubiLoadMonitorType | 1.3.6.1.4.1.7800.100.4.1.5.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current This object specifies the type of load monitoring. For example, If type is input, ubiLoadMonitorVariable should be the particular variable related to the input statistics.
| ||||
| CubiLoadMonitorInterval | 1.3.6.1.4.1.7800.100.4.1.5.1.1.2 | Integer32 | RC | |
column · Integer32 · read-create · current The monitoring interval.
| ||||
| CubiLoadMonitorVariable | 1.3.6.1.4.1.7800.100.4.1.5.1.1.3 | OBJECT IDENTIFIER | RO | |
column · OBJECT IDENTIFIER · read-only · current The object identifier of the particular variable to be sampled for load monitoring. this variable is decided by ubiLoadMonitorType. variable mapping information for load monitoring: type object identifier --------------- ------------------------- INPUT ifHCInOctets (64bit) OUTPUT ifHCOutOctets (64bit) CRC ubiIfStatsInCRCErrors (64bit) DISCARD ifInDiscards (32bit) ERROR ifInErrors (32bit) STORM-DISCARD ubiStormTotalDiscards (64bit) | ||||
| CubiLoadMonitorValue | 1.3.6.1.4.1.7800.100.4.1.5.1.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current The sampling value of the statistic for the particular variable. | ||||
| CubiLoadMonitorCriticalThreshold | 1.3.6.1.4.1.7800.100.4.1.5.1.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current The critical threshold for the sampled statistics. | ||||
| CubiLoadMonitorMajorThreshold | 1.3.6.1.4.1.7800.100.4.1.5.1.1.6 | Integer32 | RC | |
column · Integer32 · read-create · current The major threshold for the sampled statistics. | ||||
| CubiLoadMonitorUnit | 1.3.6.1.4.1.7800.100.4.1.5.1.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current The unit of the sampled statistics and threshold value. | ||||
| CubiLoadMonitorAlarmType | 1.3.6.1.4.1.7800.100.4.1.5.1.1.8 | INTEGER | AN | |
column · INTEGER · accessible-for-notify · current The alarm type. This object is used for notification only.
| ||||
| CubiLoadMonitorRowStatus | 1.3.6.1.4.1.7800.100.4.1.5.1.1.9 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of this entry. | ||||
| CubiLoadMonitorAlarmZone | 1.3.6.1.4.1.7800.100.4.1.5.1.1.10 | INTEGER | AN | |
column · INTEGER · accessible-for-notify · current This object indicates the current alarm zone.
| ||||
| NubiTrafficControl | 1.3.6.1.4.1.7800.100.4.1.5.2 | |||
| NubiTrafficControlConfig | 1.3.6.1.4.1.7800.100.4.1.5.2.1 | |||
| SubiTrafficControlReportInterval | 1.3.6.1.4.1.7800.100.4.1.5.2.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Interval when alarm is up/down according to traffic count
| ||||
| SubiTrafficControlObservingPeriod | 1.3.6.1.4.1.7800.100.4.1.5.2.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Period for counting traffic
| ||||
| SubiTrafficControlHighAlarmMode | 1.3.6.1.4.1.7800.100.4.1.5.2.1.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Action that is operated when traffic is over high-threshold
| ||||
| SubiTrafficControlLowAlarmMode | 1.3.6.1.4.1.7800.100.4.1.5.2.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Action that is operated when traffic is below low-threshold
| ||||
| TubiTrafficControlTable | 1.3.6.1.4.1.7800.100.4.1.5.2.2 | NA | ||
table · not-accessible · current The table for traffic-control configuration | ||||
| RubiTrafficControlEntry | 1.3.6.1.4.1.7800.100.4.1.5.2.2.1 | NA | ||
row · not-accessible · current The entry representing traffic-control config. Index description a) ubiTrafficControlIfindex : interface index b) ubiTrafficControlBaseType : base type of traffic value - pps(1), kbps(2) c) ubiTrafficControlTrafficType : type of traffic value - all(1), unicast(2), broadcast(3), multicast(4) d) ubiTrafficControlDirection : direction of traffic value - inbound(1), outbound(2) | ||||
| CubiTrafficControlIfindex | 1.3.6.1.4.1.7800.100.4.1.5.2.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. | ||||
| CubiTrafficControlBaseType | 1.3.6.1.4.1.7800.100.4.1.5.2.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Base type of traffic.
| ||||
| CubiTrafficControlType | 1.3.6.1.4.1.7800.100.4.1.5.2.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Type of traffic. Type based on KBPS must be only all(0). remains are only for pps.
| ||||
| CubiTrafficControlDirection | 1.3.6.1.4.1.7800.100.4.1.5.2.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Direction of traffic.
| ||||
| CubiTrafficControlHighThreshold | 1.3.6.1.4.1.7800.100.4.1.5.2.2.1.5 | Integer32 (1..1500000) | RC | |
column · Integer32 (1..1500000) · read-create · current Traffic high-threshold. Type based on KBPS could has threshold less than 1000000. | ||||
| CubiTrafficControlLowThreshold | 1.3.6.1.4.1.7800.100.4.1.5.2.2.1.6 | Integer32 (1..1500000) | RC | |
column · Integer32 (1..1500000) · read-create · current Traffic low-threshold. Type based on KBPS could has threshold less than 1000000. | ||||
| CubiTrafficControlAction | 1.3.6.1.4.1.7800.100.4.1.5.2.2.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current Traffic action type.
| ||||
| CubiTrafficControlStatus | 1.3.6.1.4.1.7800.100.4.1.5.2.2.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Interface's current status.
| ||||
| CubiTrafficControlAverageRate | 1.3.6.1.4.1.7800.100.4.1.5.2.2.1.9 | DisplayString | RO | |
column · DisplayString · read-only · current Average rate of controlled traffic. | ||||
| CubiTrafficControlOneMinRate | 1.3.6.1.4.1.7800.100.4.1.5.2.2.1.10 | DisplayString | RO | |
column · DisplayString · read-only · current Rate of controlled traffic per 1 minute. | ||||
| CubiTrafficControlAlarmCount | 1.3.6.1.4.1.7800.100.4.1.5.2.2.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current Number of alarmed times. | ||||
| CubiTrafficControlLastAlarmTime | 1.3.6.1.4.1.7800.100.4.1.5.2.2.1.12 | DisplayString | RO | |
column · DisplayString · read-only · current Last alarmed time | ||||
| CubiTrafficControlRowStatus | 1.3.6.1.4.1.7800.100.4.1.5.2.2.1.13 | RowStatus | RC | |
column · RowStatus · read-create · current Row Status | ||||
| NubiClearTrafficControl | 1.3.6.1.4.1.7800.100.4.1.5.2.3 | |||
| SubiClearTrafficControlInterface | 1.3.6.1.4.1.7800.100.4.1.5.2.3.1 | Integer32 | RW | |
scalar · Integer32 · read-write · current If value is 0, clear all interface. If value is ifindex, clear specific interface (only physical interface) | ||||
| SubiClearTrafficControlBaseType | 1.3.6.1.4.1.7800.100.4.1.5.2.3.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Traffic-control base type. 'none' value means all base type.
| ||||
| SubiClearTrafficControlType | 1.3.6.1.4.1.7800.100.4.1.5.2.3.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Traffic-control type. Type based on KBPS must be all. 'none' value means all traffic type.
| ||||
| SubiClearTrafficControlDirection | 1.3.6.1.4.1.7800.100.4.1.5.2.3.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Traffic-control direction. 'none' value means all direction.
| ||||
| SubiClearTrafficControlOperate | 1.3.6.1.4.1.7800.100.4.1.5.2.3.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current clear excute
| ||||
| NubiIfStatistics | 1.3.6.1.4.1.7800.100.4.1.6 | |||
| TubiIfEgressQueueStatsTable | 1.3.6.1.4.1.7800.100.4.1.6.1 | NA | ||
table · not-accessible · current This table contains the information for egress queue statistics. | ||||
| RubiIfEgressQueueStatsEntry | 1.3.6.1.4.1.7800.100.4.1.6.1.1 | NA | ||
row · not-accessible · current A list of the port that configure cos feild. that port collects the pass and drop statistics for egress queue.
| ||||
| CubiIfEqStatsQueueId | 1.3.6.1.4.1.7800.100.4.1.6.1.1.1 | Integer32 (0..7) | NA | |
column · Integer32 (0..7) · not-accessible · current The queue identifier. | ||||
| CubiIfEqStatsPassOctets | 1.3.6.1.4.1.7800.100.4.1.6.1.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current The pass counter for bytes. | ||||
| CubiIfEqStatsDropOctets | 1.3.6.1.4.1.7800.100.4.1.6.1.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current The drop counter for bytes. | ||||
| CubiIfEqStatsPassPkts | 1.3.6.1.4.1.7800.100.4.1.6.1.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The pass counter for packets. | ||||
| CubiIfEqStatsDropPkts | 1.3.6.1.4.1.7800.100.4.1.6.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The drop counter for packets. | ||||
| CubiIfEqStatsQueueDescr | 1.3.6.1.4.1.7800.100.4.1.6.1.1.6 | DisplayString | RW | |
column · DisplayString · read-write · current A textual string containing information about the interface's each queue. | ||||
| TubiIfStatsTable | 1.3.6.1.4.1.7800.100.4.1.6.2 | NA | ||
table · not-accessible · current This table contains the statistics for physical port. | ||||
| RubiIfStatsEntry | 1.3.6.1.4.1.7800.100.4.1.6.2.1 | NA | ||
row · not-accessible · current A Entry contains the statistics of a particular physical port.
| ||||
| CubiIfStatsInPkts | 1.3.6.1.4.1.7800.100.4.1.6.2.1.1 | Counter64 | RO | |
column · Counter64 · read-only · current The number of input packets for a given physical port. | ||||
| CubiIfStatsOutPkts | 1.3.6.1.4.1.7800.100.4.1.6.2.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current The number of output packets for a given physical interface. | ||||
| CubiIfStatsInCRCErrors | 1.3.6.1.4.1.7800.100.4.1.6.2.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current The number of input CRC errors for a given interface. | ||||
| CubiIfStatsCounterClear | 1.3.6.1.4.1.7800.100.4.1.6.2.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current Initialize the counter
| ||||
| CubiIfStatsSnmpClear | 1.3.6.1.4.1.7800.100.4.1.6.2.1.15 | INTEGER | RW | |
column · INTEGER · read-write · current Initialize the statistics in this table.
| ||||
| TubiTrafficRateTable | 1.3.6.1.4.1.7800.100.4.1.6.3 | NA | ||
table · not-accessible · current traffic rate per interface | ||||
| RubiTrafficRateEntry | 1.3.6.1.4.1.7800.100.4.1.6.3.1 | NA | ||
| CubiIfStatsInTrafficRate | 1.3.6.1.4.1.7800.100.4.1.6.3.1.1 | Counter64 | RO | |
| CubiIfStatsOutTrafficRate | 1.3.6.1.4.1.7800.100.4.1.6.3.1.2 | Counter64 | RO | |
| NubiPortControl | 1.3.6.1.4.1.7800.100.4.1.7 | |||
| TubiFlowControlTable | 1.3.6.1.4.1.7800.100.4.1.7.1 | NA | ||
table · not-accessible · current The table of flowcontrol information on physical ports. | ||||
| RubiFlowControlEntry | 1.3.6.1.4.1.7800.100.4.1.7.1.1 | NA | ||
| CubiFlowctrlReceive | 1.3.6.1.4.1.7800.100.4.1.7.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current flowcontrol on receive.
| ||||
| CubiFlowctrlSend | 1.3.6.1.4.1.7800.100.4.1.7.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current flowcontrol on send
| ||||
| CubiFlowctrlWatermark | 1.3.6.1.4.1.7800.100.4.1.7.1.1.3 | UbiFlowctrlWatermark | RW | |
column · UbiFlowctrlWatermark · read-write · current flowcontrol watermark value | ||||
| NubiRateLimit | 1.3.6.1.4.1.7800.100.4.1.7.2 | |||
| TubiRateLimitTable | 1.3.6.1.4.1.7800.100.4.1.7.2.1 | NA | ||
table · not-accessible · current The table of rate-limit information on physical ports | ||||
| RubiRateLimitEntry | 1.3.6.1.4.1.7800.100.4.1.7.2.1.1 | NA | ||
| CubiEgressTrafficRate | 1.3.6.1.4.1.7800.100.4.1.7.2.1.1.1 | Integer32 (1..10000000) | RW | |
column · Integer32 (1..10000000) · read-write · current egress traffic rate | ||||
| CubiEgressBucketSize | 1.3.6.1.4.1.7800.100.4.1.7.2.1.1.2 | Integer32 (1..4095) | RW | |
column · Integer32 (1..4095) · read-write · current egress bucket size | ||||
| CubiIngressLevel | 1.3.6.1.4.1.7800.100.4.1.7.2.1.1.3 | DisplayString | RW | |
column · DisplayString · read-write · current ingress level, range from 0.01 to 100.00 | ||||
| TubiRateLimitQueueEgressTable | 1.3.6.1.4.1.7800.100.4.1.7.2.2 | NA | ||
table · not-accessible · current The table of rate-limit q-egress information on physical ports | ||||
| RubiRateLimitQueueEgressEntry | 1.3.6.1.4.1.7800.100.4.1.7.2.2.1 | NA | ||
row · not-accessible · current An entry of rate-limit q-egress information on physical port
| ||||
| CubiQueueId | 1.3.6.1.4.1.7800.100.4.1.7.2.2.1.1 | Integer32 (0..7) | NA | |
column · Integer32 (0..7) · not-accessible · current queue id | ||||
| CubiQueueEgressTrafficRate | 1.3.6.1.4.1.7800.100.4.1.7.2.2.1.2 | Integer32 (1..10000000) | RW | |
column · Integer32 (1..10000000) · read-write · current q-egress traffic rate | ||||
| CubiQueueEgressBucketSize | 1.3.6.1.4.1.7800.100.4.1.7.2.2.1.3 | Integer32 (1..4095) | RW | |
column · Integer32 (1..4095) · read-write · current q-egress bucket size | ||||
| TubiStormControlTable | 1.3.6.1.4.1.7800.100.4.1.7.3 | NA | ||
table · not-accessible · current The table of storm-control information on physical ports | ||||
| RubiStormControlEntry | 1.3.6.1.4.1.7800.100.4.1.7.3.1 | NA | ||
| CubiBroadcastLevel | 1.3.6.1.4.1.7800.100.4.1.7.3.1.1 | DisplayString | RW | |
column · DisplayString · read-write · current broadcast control level, range from 0.01 to 100.00 | ||||
| CubiMulticastLevel | 1.3.6.1.4.1.7800.100.4.1.7.3.1.2 | DisplayString | RW | |
column · DisplayString · read-write · current multicast control level, range from 0.01 to 100.00 | ||||
| CubiUnicastLevel | 1.3.6.1.4.1.7800.100.4.1.7.3.1.3 | DisplayString | RW | |
column · DisplayString · read-write · current unicast control level, range from 0.01 to 100.00 | ||||
| NubiStormDiscardStats | 1.3.6.1.4.1.7800.100.4.1.7.4 | |||
| SubiStormDiscardStatsClear | 1.3.6.1.4.1.7800.100.4.1.7.4.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Initialize the counters for discarded packet by Storm-Control.
| ||||
| TubiStormDiscardStatsTable | 1.3.6.1.4.1.7800.100.4.1.7.4.2 | NA | ||
table · not-accessible · current This table contains the statistics of discarded packets by Storm-control on physical ports | ||||
| RubiStormDiscardStatsEntry | 1.3.6.1.4.1.7800.100.4.1.7.4.2.1 | NA | ||
row · not-accessible · current An entry of storm-control discard statistics on physical port
| ||||
| CubiStormUnicastDiscards | 1.3.6.1.4.1.7800.100.4.1.7.4.2.1.1 | Counter64 | RO | |
column · Counter64 · read-only · current The number of discarded Unicast packets by Storm-control for a given interface. | ||||
| CubiStormMulticastDiscards | 1.3.6.1.4.1.7800.100.4.1.7.4.2.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current The number of discarded Multicast packets by Storm-control for a given interface. | ||||
| CubiStormBroadcastDiscards | 1.3.6.1.4.1.7800.100.4.1.7.4.2.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current The number of discarded Broadcast packets by Storm-control for a given interface. | ||||
| CubiStormTotalDiscards | 1.3.6.1.4.1.7800.100.4.1.7.4.2.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current The Total number of discarded packets by Storm-control for a given interface. | ||||
| NubiIfErps | 1.3.6.1.4.1.7800.100.4.1.8 | |||
| TubiIfErpsTable | 1.3.6.1.4.1.7800.100.4.1.8.1 | NA | ||
table · not-accessible · current The table of ERPS information on interface. | ||||
| RubiIfErpsEntry | 1.3.6.1.4.1.7800.100.4.1.8.1.1 | NA | ||
| CubiIfErpsAggMinLink | 1.3.6.1.4.1.7800.100.4.1.8.1.1.1 | Integer32 (1..8) | RW | |
column · Integer32 (1..8) · read-write · current Minmum Link count to activate Port-channel in ERPS. - To activate Port-channel, actived members of port-channel must be minmum link count at least. | ||||
| NubiInterfaceMIBConformance | 1.3.6.1.4.1.7800.100.4.2 | |||
| NubiInterfaceMIBCompliances | 1.3.6.1.4.1.7800.100.4.2.1 | |||
| MubiInterfaceMIBCompliance | 1.3.6.1.4.1.7800.100.4.2.1.1 | |||
compliance · current The compliance statement for entities which implement the UBQS-INTERFACE-MIB | ||||
| NubiInterfaceMIBGroups | 1.3.6.1.4.1.7800.100.4.2.2 | |||
| GubiPortGroup | 1.3.6.1.4.1.7800.100.4.2.2.1 | |||
group · current A collection of objects containing information about physical port. | ||||
| GubiIfStatsGroup | 1.3.6.1.4.1.7800.100.4.2.2.2 | |||
group · current A collection of objects containing packet statistics for a given port. | ||||
| GubiSwitchportGroup | 1.3.6.1.4.1.7800.100.4.2.2.3 | |||
group · current A collection of objects containing the switchport information. | ||||
Textual conventions
PortGBICTypeListINTEGERnone(0)other(1)qsfp-plus(5)sfp(2)sfp-plus(4)xfp(3)Represents the type of slot.
PortTypeINTEGERe1000BaseBT(112)e1000BaseBX(108)e1000BaseBX10D(109)e1000BaseBX10U(110)e1000BaseCX(103)e1000BaseLH(104)e1000BaseLX(101)e1000BasePX(111)e1000BasePX20(115)e1000BasePX30(116)e1000BasePXPon(114)e1000BaseSX(102)e1000BaseSvc(113)e1000BaseT(105)e1000BaseUnknown(100)e1000BaseZX(107)e100BaseBX10(19)e100BaseBX10D(20)e100BaseBX10U(21)e100BaseEX(1014)e100BaseF(15)e100BaseFsm(17)e100BaseLX(16)e100BaseSX(22)e100BaseT4(14)e100BaseTX(13)e100BaseUnknown(10)e100BaseZX(1015)e10BaseF(12)e10BaseT(11)e10GBaseCPX(1001)e10GBaseCX4(1008)e10GBaseEPON(1019)e10GBaseER(1006)e10GBaseEW(1011)e10GBaseEX4(1003)e10GBaseLR(1004)e10GBaseLRM(1016)e10GBaseLW(1010)e10GBaseLX4(1002)e10GBaseSR(1007)e10GBaseSW(1009)e10GBaseSX4(1005)e10GBaseSfpPlus(1018)e10GBaseSvc(1012)e10GBaseT(1017)e10GBaseUnknown(1000)e10GBaseZR(1013)e10a100BaseTX(18)e10a100a1000BaseT(106)e40GBaseCR4(2001)e40GBaseLR4(2003)e40GBaseSR4(2002)e40GBaseUnknown(2000)e40GXLPPI(2004)other(1)Represents the port type.
UbiFlowctrlWatermarkOCTET STRING (SIZE (7))represent flowcontrol watermark value : '3d 3d' -------------------------- first value = wmpause(0-255) second value = wmcancel(0-255)
UbiSwitchportTypeBitsaccess(7)customerBackbonePort(4)customerEdgePort(3)customerNetworkPort(2)customerVlanPort(0)dBridgePort(6)hybrid(9)providerNetworkPort(1)trunk(8)virtualInstancePort(5)A port type. The possible port types are: customerVlanPort(0) - Indicates a port is a C-tag aware port of an enterprise VLAN aware bridge. providerNetworkPort(1) - Indicates a port is an S-tag aware port of a Provider Bridge or Backbone Edge Bridge used for connections within a PBN or PBBN. customerNetworkPort(2) - Indicates a port is an S-tag aware port of a Provider Bridge or Backbone Edge Bridge used for connections to the exterior of a PBN or PBBN. customerEdgePort(3) - Indicates a port is a C-tag aware port of a Provider Bridge used for connections to the exterior of a PBN or PBBN. customerBackbonePort(4) - Indicates a port is a I-tag aware port of a Backbone Edge Bridge's B-component. virtualInstancePort(5) - Indicates a port is a virtual S-tag aware port within a Backbone Edge Bridge's I-component which is responsible for handling S-tagged traffic for a specific backbone service instance. dBridgePort(6) - Indicates a port is a VLAN-unaware member of an 802.1D bridge. access(7) trunk(8) hybrid(9)
Traps / Notifications
- ubiLoadMonitorFallingAlarm
1.3.6.1.4.1.7800.100.4.0.1.2 - ubiLoadMonitorRisingAlarm
1.3.6.1.4.1.7800.100.4.0.1.1 - ubiPortAutoNegoFault
1.3.6.1.4.1.7800.100.4.0.0.1 - ubiTrafficControlFallingAlarm
1.3.6.1.4.1.7800.100.4.0.1.4 - ubiTrafficControlRisingAlarm
1.3.6.1.4.1.7800.100.4.0.1.3
Groups and compliance
Used by
- UBIQUOSS-10GEPON-PM-GROUP-MIB
- UBIQUOSS-10GEPON-PON-MAC-GROUP-MIB
- UBIQUOSS-10GEPON-SERVICE-POLICY-GROUP-MIB
- UBIQUOSS-10GEPON-SOFTWARE-MANAGEMENT-GROUP-MIB
- UBIQUOSS-EPON-MIB
- UBIQUOSS-EPON-ONTMANAGER-GROUP-MIB
- UBIQUOSS-EPON-PM-GROUP-MIB
- UBIQUOSS-EPON-PM-MIB
- UBIQUOSS-EPON-PON-MAC-GROUP-MIB
- UBIQUOSS-EPON-SERVICE-POLICY-GROUP-MIB
- UBIQUOSS-EPON-SOFTWARE-MANAGEMENT-GROUP-MIB