UBQS-ENTITY-MIB
Premier Network Co., LtdThe UBQS-ENTITY-MIB is used to monitor and configure operational status of Field Replaceable Units (FRUs) and other managable physical entities of the system listed in the Entity-MIB (RFC 2737) entPhysicalTable.
snmptranslate -m UBQS-ENTITY-MIB -Tpsnmpwalk -v2c -c <community> -m UBQS-ENTITY-MIB <host> 1.3.6.1.4.1.7800.100.3Imports
| ENTITY-MIB | entPhysicalContainedIn, entPhysicalDescr, entPhysicalIndex, entPhysicalName |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
| UBQS-SMI | ubiMgmtv2 |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IubiEntityMIB | 1.3.6.1.4.1.7800.100.3 | |||
identity The UBQS-ENTITY-MIB is used to monitor and configure operational status of Field Replaceable Units (FRUs) and other managable physical entities of the system listed in the Entity-MIB (RFC 2737) entPhysicalTable. | ||||
| NubiEntityMIBObjects | 1.3.6.1.4.1.7800.100.3.1 | |||
| NubiEntityNotificationEnables | 1.3.6.1.4.1.7800.100.3.1.1 | |||
| SubiFRUControlEnabled | 1.3.6.1.4.1.7800.100.3.1.1.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current This variable indicates whether the system produces the following notifications: ubiEntityFRUInserted, ubiEntityFRURemoved. A false value will prevent these notifications from being generated. | ||||
| SubiEntSensorThresholdNotificationEnabled | 1.3.6.1.4.1.7800.100.3.1.1.2 | TruthValue | RW | |
scalar · TruthValue · read-write · current This variable indicates whether the system produces the following notification: ubiEntSensorThreshold. A false value will prevent these notifications from being generated. | ||||
| TubiModuleTable | 1.3.6.1.4.1.7800.100.3.1.2 | NA | ||
table · not-accessible · current This table contains one row per module entity. | ||||
| RubiModuleEntry | 1.3.6.1.4.1.7800.100.3.1.2.1 | NA | ||
| CubiModuleId | 1.3.6.1.4.1.7800.100.3.1.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The unique module ID. | ||||
| CubiModuleType | 1.3.6.1.4.1.7800.100.3.1.2.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The textual type of this module. | ||||
| CubiModuleOperStatus | 1.3.6.1.4.1.7800.100.3.1.2.1.3 | ModuleOperType | RO | |
column · ModuleOperType · read-only · current The operational state of this module. | ||||
| CubiModuleStatusLastChangeTime | 1.3.6.1.4.1.7800.100.3.1.2.1.4 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when ubiModuleOperStatus is changed. | ||||
| CubiModuleSerialNumber | 1.3.6.1.4.1.7800.100.3.1.2.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The serial number of this module. | ||||
| CubiModuleSlotNumber | 1.3.6.1.4.1.7800.100.3.1.2.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current This value is determined by the number of slot where the module is located. | ||||
| CubiModulePortNumber | 1.3.6.1.4.1.7800.100.3.1.2.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current This value is determined by the number of port where the module is located. | ||||
| CubiModuleAction | 1.3.6.1.4.1.7800.100.3.1.2.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current This object, when read, returns one of the following results: other(1): module permanently enabled Setting this object to one of the acceptable values gives the following results: other(1): gives an error reset(2): resets the module's control logic Setting this object to any other values results in an error.
| ||||
| TubiSlotTable | 1.3.6.1.4.1.7800.100.3.1.3 | NA | ||
table · not-accessible · current This table contains one row per slot entity. | ||||
| RubiSlotEntry | 1.3.6.1.4.1.7800.100.3.1.3.1 | NA | ||
| CubiSlotModuleId | 1.3.6.1.4.1.7800.100.3.1.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The unique module ID. | ||||
| CubiSlotId | 1.3.6.1.4.1.7800.100.3.1.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The unique slot ID. | ||||
| CubiSlotType | 1.3.6.1.4.1.7800.100.3.1.3.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The textual type of this slot. | ||||
| CubiSlotOperStatus | 1.3.6.1.4.1.7800.100.3.1.3.1.4 | ModuleOperType | RO | |
column · ModuleOperType · read-only · current The status of this slot. | ||||
| CubiSlotPortNumber | 1.3.6.1.4.1.7800.100.3.1.3.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current This value is determined by the number of port where the slot is located. | ||||
| CubiSlotSerialNumber | 1.3.6.1.4.1.7800.100.3.1.3.1.6 | DisplayString | RW | |
column · DisplayString · read-write · current The serial number of this slot. | ||||
| NubiExtSlot | 1.3.6.1.4.1.7800.100.3.1.4 | |||
| SubiIEEE1588SlotOperStatus | 1.3.6.1.4.1.7800.100.3.1.4.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The operational status of the slot for IEEE 1588 specification.
| ||||
| SubiMngSlotOperStatus | 1.3.6.1.4.1.7800.100.3.1.4.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The operational status of the slot for mng specification.
| ||||
| NubiTransceiver | 1.3.6.1.4.1.7800.100.3.1.5 | |||
| TubiEntitySensorTable | 1.3.6.1.4.1.7800.100.3.1.5.1 | NA | ||
table · not-accessible · current This table contains objects which provide information about the transceiver sensor of physical entity. | ||||
| RubiEntitySensorEntry | 1.3.6.1.4.1.7800.100.3.1.5.1.1 | NA | ||
row · not-accessible · current An entry containing management information applicable to the transceiver sensor of a particular physical entity.
| ||||
| CubiEntSensorType | 1.3.6.1.4.1.7800.100.3.1.5.1.1.1 | UbiSensorDataType | RO | |
column · UbiSensorDataType · read-only · current This variable indicates the type of data reported
by the entSensorValue.
valid values are:
other(1): a measure other than those listed below
unknown(2): unknown measurement, or
arbitrary, relative numbers
voltsAC(3): electric potential
voltsDC(4): electric potential
amperes(5): electric current
celsius(6): temperature
dBm(7): dB relative to 1mW of power | ||||
| CubiEntSensorScale | 1.3.6.1.4.1.7800.100.3.1.5.1.1.2 | UbiSensorDataScale | RO | |
column · UbiSensorDataScale · read-only · current This variable indicates the exponent to apply to sensor values reported by entSensorValue. | ||||
| CubiEntSensorValue | 1.3.6.1.4.1.7800.100.3.1.5.1.1.3 | UbiSensorValue | RO | |
column · UbiSensorValue · read-only · current This variable reports the most recent measurement seen by the sensor. | ||||
| CubiEntSensorEventStatus | 1.3.6.1.4.1.7800.100.3.1.5.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current This variable indicates the present current event status of the sensor.
| ||||
| CubiEntSensorEventUpdateTime | 1.3.6.1.4.1.7800.100.3.1.5.1.1.5 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when the status of entity sensor is changed. | ||||
| CubiEntSensorAlarmHighThreshold | 1.3.6.1.4.1.7800.100.3.1.5.1.1.6 | UbiSensorValue | RW | |
column · UbiSensorValue · read-write · current This variable indicates the value of the high alarm threshold. | ||||
| CubiEntSensorWarningHighThreshold | 1.3.6.1.4.1.7800.100.3.1.5.1.1.7 | UbiSensorValue | RW | |
column · UbiSensorValue · read-write · current This variable indicates the value of the high warning threshold. | ||||
| CubiEntSensorWarningLowThreshold | 1.3.6.1.4.1.7800.100.3.1.5.1.1.8 | UbiSensorValue | RW | |
column · UbiSensorValue · read-write · current This variable indicates the value of the low warning threshold. | ||||
| CubiEntSensorAlarmLowThreshold | 1.3.6.1.4.1.7800.100.3.1.5.1.1.9 | UbiSensorValue | RW | |
column · UbiSensorValue · read-write · current This variable indicates the value of the low alarm threshold. | ||||
| CubiEntSensorName | 1.3.6.1.4.1.7800.100.3.1.5.1.1.10 | DisplayString | RO | |
column · DisplayString · read-only · current This variable indicates the name of the sensor entity. | ||||
| TubiTransceiverInfoTable | 1.3.6.1.4.1.7800.100.3.1.5.2 | NA | ||
table · not-accessible · current This table contains objects which provide information about the transceiver of physical entity. | ||||
| RubiTransceiverInfoEntry | 1.3.6.1.4.1.7800.100.3.1.5.2.1 | NA | ||
row · not-accessible · current An entry containing management information applicable to the transceiver of a particular physical entity.
| ||||
| CubiTcIdentifier | 1.3.6.1.4.1.7800.100.3.1.5.2.1.1 | UbiTcIdentifier | RO | |
column · UbiTcIdentifier · read-only · current This variable indicates the transceiver indentifier.
valid value are:
unknown(0),
other(1),
gbic(2),
module(3),
sfp(4),
xbi(5),
xenpak(6),
xfp(7),
xff(8),
xfp_e(9),
xpak(10),
x2(11) | ||||
| CubiTcVendorOUI | 1.3.6.1.4.1.7800.100.3.1.5.2.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current This variable indicates a textual string containing information about the IEEE company ID of transceiver vendor | ||||
| CubiTcVendorName | 1.3.6.1.4.1.7800.100.3.1.5.2.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current A textual string containing information about the transceiver name. | ||||
| CubiTcVendorPartNumber | 1.3.6.1.4.1.7800.100.3.1.5.2.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current A textual string containing information about the part number of the transceiver. | ||||
| CubiTcVendorRevisionLevel | 1.3.6.1.4.1.7800.100.3.1.5.2.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current A textual string containing information about the revision level of the transceiver part number. | ||||
| CubiTcVendorSerialNumber | 1.3.6.1.4.1.7800.100.3.1.5.2.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current This variable indicates a textual string containing information about the transceiver serial number. | ||||
| CubiTcVendorManufacturingDate | 1.3.6.1.4.1.7800.100.3.1.5.2.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current This variable indicates a manufacturing date of transceiver | ||||
| CubiTcWaveLength | 1.3.6.1.4.1.7800.100.3.1.5.2.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current This variable indicates a wave length of transceiver.
| ||||
| CubiTcConnector | 1.3.6.1.4.1.7800.100.3.1.5.2.1.9 | UbiTcConnectorType | RO | |
column · UbiTcConnectorType · read-only · current This variable indicates a connector type of transceiver. | ||||
| CubiTcLength | 1.3.6.1.4.1.7800.100.3.1.5.2.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current This variable indicates a length of transceiver.
| ||||
| SubiTransceiverMonitoring | 1.3.6.1.4.1.7800.100.3.1.5.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current This variable indicates whether the system produces the log and notification for transceiver sensor. | ||||
| NubiEntityMIBNotificationPrefix | 1.3.6.1.4.1.7800.100.3.2 | |||
| NubiFruNotifications | 1.3.6.1.4.1.7800.100.3.2.0 | |||
| !ubiFRUInserted | 1.3.6.1.4.1.7800.100.3.2.0.1 | |||
notification · current The ubiEntityFRUInserted notification indicates that a FRU was inserted. The varbind for this notification indicates the entPhysicalIndex of the inserted FRU, and the entPhysicalIndex of the FRU's container. | ||||
| !ubiFRURemoved | 1.3.6.1.4.1.7800.100.3.2.0.2 | |||
notification · current The ubiEntityFRURemoved notification indicates that a FRU was removed. The varbind for this notification indicates the entPhysicalIndex of the removed FRU, and the entPhysicalIndex of the FRU's container. | ||||
| NubiEntitySensorNotifications | 1.3.6.1.4.1.7800.100.3.2.1 | |||
| !ubiEntSensorThreshold | 1.3.6.1.4.1.7800.100.3.2.1.1 | |||
notification · current The ubiEntSensorThreshold notification indicates that the status of transceiver sensor was changed. | ||||
| NubiEntityMIBConformance | 1.3.6.1.4.1.7800.100.3.3 | |||
| NubiEntityMIBCompliances | 1.3.6.1.4.1.7800.100.3.3.1 | |||
| MubiEntityMIBCompliance | 1.3.6.1.4.1.7800.100.3.3.1.1 | |||
compliance · current An Entity-MIB implementation can implement this group to provide FRU status and control. | ||||
| NubiEntityMIBGroups | 1.3.6.1.4.1.7800.100.3.3.2 | |||
| GubiEntityMIBModuleGroup | 1.3.6.1.4.1.7800.100.3.3.2.1 | |||
group · current The collection of objects which are used to get the operational state and redundancy state of the modules | ||||
| GubiEntitySlotGroup | 1.3.6.1.4.1.7800.100.3.3.2.2 | |||
group · current The collection of objects which are used to get the operational state and redundancy state of the slot.
| ||||
| GubiEntityMIBNotificationGroup | 1.3.6.1.4.1.7800.100.3.3.2.3 | |||
group · current TThe collection of objects which are used to send a notification. | ||||
| GubiEntiryMIBIEEE1588SlotGroup | 1.3.6.1.4.1.7800.100.3.3.2.4 | |||
group · current The collection of objects which are used to get the operational state of the slot for IEEE 1588.
| ||||
| GubiEntityMIBTransceiverGroup | 1.3.6.1.4.1.7800.100.3.3.2.5 | |||
group · current The collection of objects which are used to get the information of transceiver.
| ||||
Textual conventions
ModuleOperTypeINTEGERdisabled(3)ok(2)other(1)Operational module states. Valid values are : unknown(1) Module is not in one of other states normal operational states: ok(2) Module is operational. disabled(3) Module is administratively disabled. selfTest(6) Module is performing selfTest. failure states: failed(7) Module has failed due to some condition not stated above. dormant(12) Module is waiting for an external or internal event to become operational.UbiSensorDataScaleINTEGERatto(3)exa(14)femto(4)giga(12)kilo(10)mega(11)micro(7)milli(8)nano(6)peta(15)pico(5)tera(13)units(9)yocto(1)yotta(17)zepto(2)zetta(16)International System of Units (SI) prefixes.
UbiSensorDataTypeINTEGERamperes(4)celsius(5)cmm(10)dBm(6)hertz(14)other(1)percentRH(8)rpm(9)specialEnum(12)truthvalue(11)unknown(2)volts(3)watts(13)sensor measurement data types. valid values are: other(1): a measure other than those listed below unknown(2): unknown measurement, or arbitrary, relative numbers volts(3): electric potential amperes(4): electric current celsius(5): temperature dBm(6): dB relative to 1mW of power percentRH(8): percent relative humidity rpm(9): shaft revolutions per minute cmm(10),: cubic meters per minute (airflow) truthvalue(11): value takes { true(1), false(2) } specialEnum(12): value takes user defined enumerated values watts(13): power hertz(14): frequencyUbiSensorPrecisionINTEGER (-8..9)When in the range 1 to 9, SensorPrecision is the number of decimal places in the fractional part of a SensorValue fixed-point number. When in the range -8 to -1, SensorPrecision is the number of accurate digits in a SensorValue fixed-point number. SensorPrecision is 0 for non-fixed-point numbers. Agent implementors must choose a value for SensorPrecision so that the precision and accuracy of a SensorValue is correctly indicated. For example, a temperature sensor that can measure 0o to 100o C in 0.1o increments, +/- 0.05o, would have a SensorPrecision of 1, a SensorDataScale of units(0), and a SensorValue ranging from 0 to 1000. The SensorValue would be interpreted as (degrees C * 10). If that temperature sensor's precision were 0.1o but its accuracy were only +/- 0.5o, then the SensorPrecision would be 0. The SensorValue would be interpreted as degrees C. Another example: a fan rotation speed sensor that measures RPM from 0 to 10,000 in 100 RPM increments, with an accuracy of +50/-37 RPM, would have a SensorPrecision of -2, a SensorDataScale of units(9), and a SensorValue ranging from 0 to 10000. The 10s and 1s digits of SensorValue would always be 0.
UbiSensorValueOCTET STRINGRepresent the sensor value
UbiSensorValue_ciscoINTEGER (-1000000000..1000000000)For sensors that measure voltsAC, voltsDC, amperes, watts, hertz, celsius, cmm this item is a fixed point number ranging from -999,999,999 to +999,999,999. Use the value -1000000000 to indicate underflow. Use the value +1000000000 to indicate overflow. Use SensorPrecision to indicate how many fractional digits the SensorValue has. For sensors that measure percentRH, this item is a number ranging from 0 to 100. For sensors that measure rpm, this item can take only nonnegative values, 0..999999999. For sensors of type truthvalue, this item can take only two values: true(1), false(2). For sensors of type specialEnum, this item can take any value in the range (-1000000000..1000000000), but the meaning of each value is specific to the sensor. For sensors of type other and unknown, this item can take any value in the range (-1000000000..1000000000), but the meaning of the values are specific to the sensor. Use Entity-MIB entPhysicalTable.entPhysicalVendorType to learn about the sensor type.
UbiTcConnectorTypeINTEGERbnc_tnc(5)copper_pigtail(13)fiber_coaxial(6)fiber_style1_copper(3)fiber_stype2_copper(4)fiberjack(7)hssdc2(12)lc(8)mt_rj(9)optical_pigtail(11)other(1)sc(2)sg(10)unknown(0)UbiTcEncodingTypeINTEGERenc_4b5b(3)enc_64b(2)enc_8b10b(4)enc_manchester(8)enc_nrz(6)enc_rz(7)enc_sonet(5)other(1)unknown(0)UbiTcIdentifierINTEGERgbic(2)module(3)other(1)sfp(4)unknown(0)x2(11)xbi(5)xenpak(6)xff(8)xfp(7)xfp_e(9)xpak(10)
Traps / Notifications
- ubiEntSensorThreshold
1.3.6.1.4.1.7800.100.3.2.1.1 - ubiFRUInserted
1.3.6.1.4.1.7800.100.3.2.0.1 - ubiFRURemoved
1.3.6.1.4.1.7800.100.3.2.0.2