UBQS-CONFIG-MIB
Premier Network Co., LtdThis MIB module defines MIB objects which provide mechanisms to remotely configure the parameters used by an SNMP entity.
snmptranslate -m UBQS-CONFIG-MIB -Tpsnmpwalk -v2c -c <community> -m UBQS-CONFIG-MIB <host> 1.3.6.1.4.1.7800.100.18Imports
| IANAifType-MIB | IANAifType |
|---|---|
| INET-ADDRESS-MIB | InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
| UBQS-SMI | ubiMgmtv2 |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IubiConfigMIB | 1.3.6.1.4.1.7800.100.18 | |||
identity This MIB module defines MIB objects which provide mechanisms to remotely configure the parameters used by an SNMP entity. | ||||
| NubiConfigMIBNotificationPrefix | 1.3.6.1.4.1.7800.100.18.0 | |||
| NubiConfigMIBObjects | 1.3.6.1.4.1.7800.100.18.1 | |||
| TubiConfigInfoTable | 1.3.6.1.4.1.7800.100.18.1.1 | NA | ||
table · not-accessible · current The table of configuration file list that consists of image and config | ||||
| RubiConfigInfoEntry | 1.3.6.1.4.1.7800.100.18.1.1.1 | NA | ||
row · not-accessible · current The entry representing one element of configuration file list
| ||||
| CubiConfigName | 1.3.6.1.4.1.7800.100.18.1.1.1.1 | DisplayString | RO | |
column · DisplayString · read-only · current Configuration file name or image name | ||||
| CubiConfigType | 1.3.6.1.4.1.7800.100.18.1.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Configuration type config : configuration file image : image file other : other type file
| ||||
| CubiConfigCurrentStatus | 1.3.6.1.4.1.7800.100.18.1.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Current configuration file status
| ||||
| CubiConfigNextStatus | 1.3.6.1.4.1.7800.100.18.1.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Next configuration file status
| ||||
| NubiConfigErase | 1.3.6.1.4.1.7800.100.18.1.2 | |||
| SubiConfigEraseMode | 1.3.6.1.4.1.7800.100.18.1.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The type of object to be erased. To erase a file, value must be 1, 2 or 3. fileInFlash means config and image file at system flash and fileInUsbFlash means config and image file at USB flash.
| ||||
| SubiConfigEraseFileName | 1.3.6.1.4.1.7800.100.18.1.2.2 | DisplayString | RW | |
scalar · DisplayString · read-write · current If mode is 'configFile', configuration file name to be erased. startupConfig doesn't need this object | ||||
| SubiConfigEraseOperate | 1.3.6.1.4.1.7800.100.18.1.2.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Excute to erase configuration
| ||||
| SubiConfigEraseUsbPartNum | 1.3.6.1.4.1.7800.100.18.1.2.4 | Integer32 (0..9) | RW | |
scalar · Integer32 (0..9) · read-write · current The number of USB flash partition which has a file to be erase. This object is only for when ubiConfigEraseMode is 'fileInUsbFlash'. | ||||
| NubiConfigCopy | 1.3.6.1.4.1.7800.100.18.1.3 | |||
| SubiConfigSourceMethod | 1.3.6.1.4.1.7800.100.18.1.3.1 | ConfigMethodType | RW | |
scalar · ConfigMethodType · read-write · current configuration source control method Represents 'copy <source> <destination>'. each source method has possible destination methods. The mapping list below: source | destination =================================================== startup-config | running-config | ftp | tftp --------------------------------------------------- running-config | startup-config | ftp | tftp | flash | usbflash --------------------------------------------------- ftp | startup-config | running-config | flash | config-file --------------------------------------------------- tftp | startup-config | running-config | flash | config-file --------------------------------------------------- flash | ftp | tftp | flash | usbflash --------------------------------------------------- usbflash | flash | usbflash --------------------------------------------------- | ||||
| SubiConfigSourceFileName | 1.3.6.1.4.1.7800.100.18.1.3.2 | DisplayString | RW | |
scalar · DisplayString · read-write · current If not startup or running, source file name | ||||
| SubiConfigSourceIpAddress | 1.3.6.1.4.1.7800.100.18.1.3.3 | DisplayString | RW | |
scalar · DisplayString · read-write · current If tftp or ftp, ip address to be connected | ||||
| SubiConfigSouceUserId | 1.3.6.1.4.1.7800.100.18.1.3.4 | DisplayString | RW | |
scalar · DisplayString · read-write · current If ftp, server user id | ||||
| SubiConfigSourceUserPassword | 1.3.6.1.4.1.7800.100.18.1.3.5 | DisplayString | RW | |
scalar · DisplayString · read-write · current If ftp, server user password | ||||
| SubiConfigSourcePartNum | 1.3.6.1.4.1.7800.100.18.1.3.6 | DisplayString | RW | |
scalar · DisplayString · read-write · current If usbflash, system partition number | ||||
| SubiConfigDestinationMethod | 1.3.6.1.4.1.7800.100.18.1.3.7 | ConfigMethodType | RW | |
scalar · ConfigMethodType · read-write · current configuration destination control method Represents 'copy <source> <destination>'. each source method has possible destination methods. The mapping list below: source | destination =================================================== startup-config | running-config | ftp | tftp --------------------------------------------------- running-config | startup-config | ftp | tftp | flash | usbflash --------------------------------------------------- ftp | startup-config | running-config | flash --------------------------------------------------- tftp | startup-config | running-config | flash --------------------------------------------------- flash | ftp | tftp | flash | usbflash --------------------------------------------------- usbflash | flash | usbflash --------------------------------------------------- | ||||
| SubiConfigDestinationFileName | 1.3.6.1.4.1.7800.100.18.1.3.8 | DisplayString | RW | |
scalar · DisplayString · read-write · current If startup or running, destination file name | ||||
| SubiConfigDestinationIpAddress | 1.3.6.1.4.1.7800.100.18.1.3.9 | DisplayString | RW | |
scalar · DisplayString · read-write · current If ftp or tftp, server ip address | ||||
| SubiConfigDestinationUserId | 1.3.6.1.4.1.7800.100.18.1.3.10 | DisplayString | RW | |
scalar · DisplayString · read-write · current If ftp, server user id | ||||
| SubiConfigDestinationUserPassword | 1.3.6.1.4.1.7800.100.18.1.3.11 | DisplayString | RW | |
scalar · DisplayString · read-write · current If ftp, server user password | ||||
| SubiConfigDestinationPartNum | 1.3.6.1.4.1.7800.100.18.1.3.12 | DisplayString | RW | |
scalar · DisplayString · read-write · current If usbflash, system partition number | ||||
| SubiConfigCopyOperate | 1.3.6.1.4.1.7800.100.18.1.3.13 | INTEGER | RW | |
scalar · INTEGER · read-write · current excute to copy configuration
| ||||
| TubiUsbConfigInfoTable | 1.3.6.1.4.1.7800.100.18.1.4 | NA | ||
table · not-accessible · current The table of configuration file list that consists of image and config at usbflash | ||||
| RubiUsbConfigInfoEntry | 1.3.6.1.4.1.7800.100.18.1.4.1 | NA | ||
row · not-accessible · current The entry representing one element of configuration file list at usbflash | ||||
| CubiUsbPartNum | 1.3.6.1.4.1.7800.100.18.1.4.1.1 | Integer32 (0..9) | RO | |
column · Integer32 (0..9) · read-only · current The file system partition number for USB flash. | ||||
| CubiUsbConfigName | 1.3.6.1.4.1.7800.100.18.1.4.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current Configuration file name or image name | ||||
| CubiUsbConfigType | 1.3.6.1.4.1.7800.100.18.1.4.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Configuration type config : configuration file image : image file other : other type file
| ||||
| CubiUsbConfigCurrentStatus | 1.3.6.1.4.1.7800.100.18.1.4.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Current configuration file status
| ||||
| CubiUsbConfigNextStatus | 1.3.6.1.4.1.7800.100.18.1.4.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Next configuration file status
| ||||
| NubiConfigMIBConformance | 1.3.6.1.4.1.7800.100.18.2 | |||
| NubiConfigMIBCompliances | 1.3.6.1.4.1.7800.100.18.2.1 | |||
| MubiConfigMIBCompliance | 1.3.6.1.4.1.7800.100.18.2.1.1 | |||
compliance · current The compliance statement for entities which implement the ubiquoss system configuration MIB. | ||||
| NubiConfigMonMIBGroups | 1.3.6.1.4.1.7800.100.18.2.2 | |||
| GubiConfigMIBGroup | 1.3.6.1.4.1.7800.100.18.2.2.1 | |||
group · current ubiquoss system configuration.
| ||||
| GubiConfigMIBNotifGroup | 1.3.6.1.4.1.7800.100.18.2.2.2 | |||
group · current A notification group providing alarm notification for system configuration.
| ||||
Textual conventions
ConfigMethodTypeINTEGERconfigFile(7)flash(5)ftp(3)noMethod(0)runningConfig(2)startupConfig(1)tftp(4)usbFlash(6)Represents 'copy <source> <destination>'. each source method has possible destination methods. The mapping list below: source | destination =================================================== startup-config | running-config | ftp | tftp --------------------------------------------------- running-config | startup-config | ftp | tftp | flash | usbflash --------------------------------------------------- ftp | startup-config | running-config | flash | config-file --------------------------------------------------- tftp | startup-config | running-config | flash | config-file --------------------------------------------------- flash | ftp | tftp | flash | usbflash --------------------------------------------------- usbflash | flash | usbflash ---------------------------------------------------