TrellixCUGEType INTEGERauto-negotiate(3) hundred-Mbps(2) one-gbps(4) other(0) ten-Mbps(1)
Specify speed for copper gigabit ethernet ports.
example: 10 or 100 or 1000Mbps or auto
TrellixEventCategory INTEGERapplication(5) commnunication(2) environment(4) equipment(1) other(0) qos(3)
TrellixEventSeverity INTEGERclear(2) critical(5) error(4) inform(1) unknown(0) warning(3)
TrellixFEType INTEGERauto-negotiate(3) hundred-Mbps(2) other(0) ten-Mbps(1)
Specify speed for Fast Ethernet ports.
example: 10 or 100 Mbps
TrellixGEType INTEGERauto-negotiate(3) one-gbps(2) other(0)
Specify speed for Gigabit Ethernet ports.
TrellixIDSAction INTEGERcertupdate(7) disable(2) enable(1) hitlessreboot(8) other(0) reset(3) sensordown(6) sigupdate(4) swupdate(5)
These specify IDS-specific actions on the management and sensor/analysis card.
TrellixIDSActionResult Integer32 (0..255)Bitmap-encoded integer that indicates detailed results of an action
TrellixIDSActionStatus INTEGERdisabled(4) enabled(3) failed(0) sigupdated(2) succeeded(1)
Status reflecting action outcome.
TrellixIDSCardType INTEGERmgmt(1) other(0) sensor(2)
Card type aplicable to Trellix IPS.
Current support limted to
- Management card
- Sensor Analysis card
TrellixIDSOperatingMode INTEGERinline-fail-close(4) inline-fail-open-active(5) inline-fail-open-passive(1) monitor-dual-intf(2) monitor-single-intf(3)
Operating mode for Trellix IPS Sensor
inline-fail-open-passive: read and forward packets to destination. This
will be fail-open (passive kit)
monitor-dual-intf: monitor two interfaces using Tap
monitor-single-intf: monitor span/hub
inline-fail-close: Uses span dongle cables for the 10/100
uses external bypass switch for gigabit
inline-fail-open-active:read and forward packets to destination. This
will be fail-open. This is available on M-series only.TrellixIDSPortType INTEGERcopperGigabitEthernet(3) fastEthernet(2) fortyGigabitEthernet(5) gigabitEthernet(1) other(0) tenGigabitEthernet(4) vnic(6)
Indicates type of port.
gigabitEthernet supports only 1000Mbps, fastEthernet supports
10/100 Mbps, copperGigabitEthernet supports 10/100/1000 Mbps and
tenGigabitEthernet supports only 10 Gbps.
TrellixIDSResponseMode INTEGERinterace-port(0) management-port(2) response-port(1)
TrellixPluggableModuleType INTEGERfixed-ports-sfp-12(9) other(0) pluggable-module-qsfp(1) pluggable-module-qsfp-4(3) pluggable-module-rj45-4(10) pluggable-module-rj45-6(5) pluggable-module-sfp-plus(2) pluggable-module-sfp-plus-12(4) pluggable-module-sfp-plus-pfo-4-mm-50um(7) pluggable-module-sfp-plus-pfo-4-mm-62-5um(8) pluggable-module-sfp-plus-pfo-4-sm(6)
Types of supported pluggable modules.
TrellixPortLinearIndex Integer32 (0..1024)This MIB object type indicates the Linear Index of the monitoring port. This index is
generated by the sensor appliance using the pair of slot index and the port index values.
The other MIB tables would directly use this linear index, whereever applicable.
TrellixPortSpeed INTEGERauto-negotiate-down-hundred-Mbps(3) auto-negotiate-down-one-Gbps(10) auto-negotiate-hundred-Mbps(7) auto-negotiate-one-Gbps(8) auto-negotiate-ten-Gbps(9) auto-negotiate-ten-Mbps(6) fixed-forty-Gbps(11) fixed-hundred-Mbps(2) fixed-one-Gbps(4) fixed-ten-Gbps(5) fixed-ten-Mbps(1) other(0)
Specify speed for all types of ports.
example: 10 or 100 or 1000Mbps or auto or 10Gbps
TrellixProductType INTEGERids(0)
TrellixTFTPAction INTEGERabort-transfer(6) download-PacketCaptureFilter-file(15) download-bot-dat-file(20) download-ca-sensor-cert(37) download-dos(5) download-ffp-bulk-update(28) download-geolocation-db-file(17) download-gti-pc-ssl-cert(34) download-ibac-ad-file(13) download-image(1) download-image-and-signature(8) download-matd-ssl-cert-file(25) download-mpecert(9) download-ntba-ssl-cert-file(21) download-sgap-ssl-cert(10) download-signature(2) download-sslcert(7) download-syslog-ssl-cert(38) download-usrid-acl-file(19) download-zcenter-ssl-cert(33) other(0) upload-PacketCaptureFilter-file(16) upload-PacketCapturePCAP-file(18) upload-ca-sensor-csr(36) upload-dev-prof-file(22) upload-dos(3) upload-ibac-ad-file(12) upload-sgap-ssl-csr(11) upload-suricata-failed-rules-file(35) upload-sw-tlv-file(14) upload-trace(4)
TrellixTFTPFailedResult INTEGERaccessViolation(7) cannotReachServer(3) channelOutOfSync(9) compareSigfilesError(33) decryptionError(6) fileAlreadyExists(8) fileDoesNotExists(39) fileParseError(36) incrSigfileFormatError(61) incrSigfileHasSigsetMismatchError(62) incrSigfileMergeError(63) incrSigfileUnspportedError(53) initIDConvertTablesError(30) insufficientDiskSpace(5) internalApplyError(42) invalidFileName(1) invalidFileType(2) noResponseFromServer(4) other(0) outOfMemoryError(40) realtimeUpdateError(11) sensorNotInitialized(10) sensorRebootRequired(35) sigfile1ConvertError(19) sigfile1FormatVersionError(37) sigfile1InsufficientSpaceForTotalRules(18) sigfile1MD5Error(17) sigfile1MemoryError(14) sigfile1NullError(16) sigfile1OpenError(12) sigfile1ReadError(15) sigfile1SplitError(20) sigfile1StatError(13) sigfile2ConvertError(28) sigfile2FormatVersionError(38) sigfile2InsufficientSpaceForTotalRules(27) sigfile2MD5Error(26) sigfile2MemoryError(23) sigfile2NullError(25) sigfile2OpenError(21) sigfile2ReadError(24) sigfile2SplitError(29) sigfile2StatError(22) sigfileMarkError(31) sigfileUndoMarkError(32) transferAborted(41) updateBaseSigfileError(34)
This object defines reasons for TFTP failure.
Applicable only when the corresponding <TrellixTFTPStatus> is set to 'failed'.
TrellixTFTPFileType INTEGERconfiguration(5) dos(4) image(1) image-and-signature(7) mpecert(8) other(0) signature(2) sslcert(6) trace(3)
TrellixTFTPInProgressResult Integer32 (0..100)This object defines user feedback during TFTP progress.
Applicable only when corresponding <TrellixTFTPStatus> is set to 'inProgress'.
Indicates percentage of TFTP up/download during the inProgress mode
TrellixTFTPStatus INTEGERapplyFailed(12) applying(23) applyingComplete(24) dwnldFailed(11) dwnlding(21) dwnldingComplete(22) failed(1) inProgress(2) other(0) succeeded(3)
Indicates status of corresponding TFTP action <TrellixTFTPAction> request.