MIB Browser
This module defines textual conventions used in the
transition enterprise mibs.
Organization
Transition Networks, Inc.
Root OID
1.3.6.1.4.1.868.1.5.1
Last updated
Objects
1
Source
Show full MIB
snmptranslate -m TRANSITION-TC -Tp
snmpwalk -v2c -c <community> -m TRANSITION-TC <host> 1.3.6.1.4.1.868.1.5.1

Imports

INET-ADDRESS-MIBInetAddress, InetAddressType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIBits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, PhysAddress, TEXTUAL-CONVENTION
TRANSITION-SMItnModules

OID tree

NameOIDTypeAccessStatus
ItransitionTC1.3.6.1.4.1.868.1.5.1

Textual conventions

CpsConnector INTEGER

bnc(20) bncdual(30) db9rsxxx(31) din6(38) lc(19) mtrjmm(18) mtrjsm(25) rj11(33) rj45(10) sc125km(35) sc40km(34) scmm(13) scmm1300(23) scsimplex(29) scsm(14) scsmelh(16) scsmlh(15) scsmlhlw(17) scsmsh(28) serial26(26) sfp(40) stmm(11) stmm1300(24) stmmlh(27) stsm(12) stsmelh(22) stsmlh(21) termblock(32)

This enumerates all the Transition networks supported media connectors.
TNEthPhyMode INTEGER

phy1000BaseX(3) phy100BaseFX(2) phy10x100BaseT(1) phy10x100x1000BaseT(4) phySGMII(5) unknown(0)

The different Ethernet PHY interfaces supported.
TNEthernetAutoCross INTEGER

autocross(3) mdi(1) mdiX(2) notApplicable(4)

This enumerates all the Transition networks Ethernet Autocross values.
TNEthernetDuplex INTEGER

fullDuplex(2) halfDuplex(1)

This enumerates all the Transition networks supported Ethernet interface duplex.
TNEthernetSpeed INTEGER

gbps1(3) gbps10(4) gbps12(7) gbps5(6) mbps10(1) mbps100(2) mbps2500(5)

This enumerates all the Transition networks supported Ethernet speeds.
TNLoopbackModeCapBits Bits

alternateLBCapable(3) macLayerLBCapable(2) phyLayerLBCapable(1) remotePeerLBCapable(4) unused(0)

This enumerates all the Transition networks loopback modes capability.
TNLoopbackModes INTEGER

alternateLB(3) macLayerLB(2) noLoopback(0) phyLayerLB(1) remotePeerLB(4)

This enumerates all the Transition networks loopback modes supported.
TNVlanIndexOrZero INTEGER (0..4095)
The VLAN ID as VlanIndex as defined in Q-BRIDGE including zero.
If the value is between 1 and 4095 inclusive,
it represents an IEEE 802.1Q VLAN-ID.
If the value is zero, it is object-specific and
must therefore be defined as part of the
description of any object which uses this syntax.

Used by