TN-VLAN-MGMT-MIB
Transition Engineering Inc.The mib module for managing VLAN and QoS in TN platform products.
snmptranslate -m TN-VLAN-MGMT-MIB -Tpsnmpwalk -v2c -c <community> -m TN-VLAN-MGMT-MIB <host> 1.3.6.1.4.1.868.2.5.4Imports
| DOT3-OAM-MIB | EightOTwoOui |
|---|---|
| ENTITY-MIB | entPhysicalIndex |
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero, ifIndex |
| Q-BRIDGE-MIB | PortList, VlanIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
| TRANSITION-SMI | tnProducts |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| ItnVlanQoSMgmtMIB | 1.3.6.1.4.1.868.2.5.4 | |||
identity The mib module for managing VLAN and QoS in TN platform products. | ||||
| NtnVlanQoSMgmtNotifications | 1.3.6.1.4.1.868.2.5.4.0 | |||
| !tnIfSourceAddrChangeEvt | 1.3.6.1.4.1.868.2.5.4.0.1 | |||
notification · current A tnIfSourceAddrChangeEvt event is sent when the tnIfSourceAddrLock is set to 'true', the ionIfSourceAddrLockAction is set to 'discardAndNotify' or 'all' and there is an intrusion/SA change on this port.
| ||||
| NtnVlanQoSMgmtObjects | 1.3.6.1.4.1.868.2.5.4.1 | |||
| NtnSysVlanMgmt | 1.3.6.1.4.1.868.2.5.4.1.1 | |||
| TtnSysManagmentVLANTable | 1.3.6.1.4.1.868.2.5.4.1.1.1 | NA | ||
table · not-accessible · current Management VLAN configuration table. | ||||
| RtnSysManagmentVLANEntry | 1.3.6.1.4.1.868.2.5.4.1.1.1.1 | NA | ||
row · not-accessible · current Each entry represents the management VLAN entry on a device.
| ||||
| CtnSysMgmtVLANStatus | 1.3.6.1.4.1.868.2.5.4.1.1.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The device if management VLAN capable, can enable the secure channel for all its management traffic by setting this variable to enabled(1).
| ||||
| CtnSysMgmtVLANId | 1.3.6.1.4.1.868.2.5.4.1.1.1.1.2 | INTEGER (1..4094) | RW | |
column · INTEGER (1..4094) · read-write · current The VLAN id, that this device will use for its management traffic. All Management frames to this device when 'tnSysManagmentVLANStatus' is set to 'enabled(1)' must be tagged with this VLAN id and all management frames from this device will be tagged with this VLAN id. | ||||
| CtnSysMgmtMemberPorts | 1.3.6.1.4.1.868.2.5.4.1.1.1.1.3 | Bits | RW | |
column · Bits · read-write · current The ports on this device which are members of this Management VLAN. This is for security, some ports can be made not a member, which blocks all management access from this port. Each bit in this variable represents the logical port number local to the device.
| ||||
| TtnSysVLANExtTable | 1.3.6.1.4.1.868.2.5.4.1.1.2 | NA | ||
table · not-accessible · current System VLAN external configuration table. | ||||
| RtnSysVLANExtEntry | 1.3.6.1.4.1.868.2.5.4.1.1.2.1 | NA | ||
row · not-accessible · current Each entry represents the VLAN config on a device.
| ||||
| CtnSysVlanExtMgmtPortType | 1.3.6.1.4.1.868.2.5.4.1.1.2.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current This mib variable is applicable for products that have a out of band management port. This determines the Port type for all management traffic.It can be one of the following types: Unaware, C-port, S-port, or S-custom-port where: - Unaware: The management traffic is untagged or not management vlan. - C-port: The management vlan is a C-Vlan and TPID 0x8100 is used for out of band management traffic. - S-port: The management vlan is a S-Vlan and TPID 0x88a8 is used for out of band management traffic. - S-custom-port: The management vlan is a S-Vlan, which use a custom TPID defined in tnSysVLANExtCustomSTag.
| ||||
| CtnSysVLANExtCustomSTag | 1.3.6.1.4.1.868.2.5.4.1.1.2.1.2 | OCTET STRING (SIZE (2)) | RW | |
column · OCTET STRING (SIZE (2)) · read-write · current This field specifies the Ether type used for Custom S-ports. This is a global setting and is applicable for all Custom S-ports. This field is used when TPID other than 0x8100 and 0x88a8 is needed for S-Tags. | ||||
| CtnVlanConfigGlobalsMainAccessVlans0To1K | 1.3.6.1.4.1.868.2.5.4.1.1.2.1.3 | TNVlanListQuarter | RW | |
column · TNVlanListQuarter · read-write · current First quarter of bit-array indicating the enabled access VLANs. | ||||
| CtnVlanConfigGlobalsMainAccessVlans1KTo2K | 1.3.6.1.4.1.868.2.5.4.1.1.2.1.4 | TNVlanListQuarter | RW | |
column · TNVlanListQuarter · read-write · current Second quarter of bit-array indicating the enabled access VLANs. | ||||
| CtnVlanConfigGlobalsMainAccessVlans2KTo3K | 1.3.6.1.4.1.868.2.5.4.1.1.2.1.5 | TNVlanListQuarter | RW | |
column · TNVlanListQuarter · read-write · current Third quarter of bit-array indicating the enabled access VLANs. | ||||
| CtnVlanConfigGlobalsMainAccessVlans3KTo4K | 1.3.6.1.4.1.868.2.5.4.1.1.2.1.6 | TNVlanListQuarter | RW | |
column · TNVlanListQuarter · read-write · current Last quarter of bit-array indicating the enabled access VLANs. | ||||
| NtnDevSysPriorityMgmt | 1.3.6.1.4.1.868.2.5.4.1.2 | |||
| TtnSwIPPrioTable | 1.3.6.1.4.1.868.2.5.4.1.2.1 | NA | ||
table · not-accessible · current IP Traffic class table. | ||||
| RtnSwIPPrioEntry | 1.3.6.1.4.1.868.2.5.4.1.2.1.1 | NA | ||
row · not-accessible · current Each entry represents the remapped value for each traffic class.
| ||||
| CtnSwIPPrioIndex | 1.3.6.1.4.1.868.2.5.4.1.2.1.1.1 | INTEGER (1..11111) | RO | |
column · INTEGER (1..11111) · read-only · current The IP traffic class remap table index. The indexing is for a bridge entity | ||||
| CtnSwIPPrioTC | 1.3.6.1.4.1.868.2.5.4.1.2.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The IP traffic class value. | ||||
| CtnSwIPPrioRemap | 1.3.6.1.4.1.868.2.5.4.1.2.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The frames with IP traffic class set, will be remapped to the listed priority queues.
| ||||
| TtnSwIEEEPrioTable | 1.3.6.1.4.1.868.2.5.4.1.2.2 | NA | ||
table · not-accessible · current IEEE priority remapping table. | ||||
| RtnSwIEEEPrioEntry | 1.3.6.1.4.1.868.2.5.4.1.2.2.1 | NA | ||
row · not-accessible · current Each entry represents the remapped value for each priority class.
| ||||
| CtnSwIEEEPriority | 1.3.6.1.4.1.868.2.5.4.1.2.2.1.1 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current The IEEE tag priority bits in the frame. | ||||
| CtnSwIEEEPriorityRemap | 1.3.6.1.4.1.868.2.5.4.1.2.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The frames with IEEE priority bits set, will be mapped to the listed priority queues.
| ||||
| NtnInterfaceQoSMgmt | 1.3.6.1.4.1.868.2.5.4.1.3 | |||
| TtnIfPriorityTable | 1.3.6.1.4.1.868.2.5.4.1.3.1 | NA | ||
table · not-accessible · current This table has entries for interfaces which are capable of Priority management. | ||||
| RtnIfPriorityEntry | 1.3.6.1.4.1.868.2.5.4.1.3.1.1 | NA | ||
| CtnIfDefaultPriority | 1.3.6.1.4.1.868.2.5.4.1.3.1.1.1 | INTEGER (0..7) | RW | |
column · INTEGER (0..7) · read-write · current The default priority for frames ingressing this port, if it doesnt have any IEEE 802.3ac tag or any IP TOS/Diffserv traffic class fields. | ||||
| CtnIfUseIEEEPriority | 1.3.6.1.4.1.868.2.5.4.1.3.1.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current If the frame is IEEE tagged, and this mib variable is set to 'true', the 802.1p bits are used as the frames priority. | ||||
| CtnIfUseIPPriority | 1.3.6.1.4.1.868.2.5.4.1.3.1.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current If the frame has IP TOS/Diffserv traffic class fields, and this mib variable is set to 'true'. The traffic class fields will be used as the frame's priority. | ||||
| CtnIfUseIPOrIEEEPriority | 1.3.6.1.4.1.868.2.5.4.1.3.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current If the frame has IP TOS/Diffserv traffic class fields, and IEEE 802.3ac tagged, then this mib variable decides which one is to be considered as the frame's priority.
| ||||
| CtnIfSrcMACPriorityRemap | 1.3.6.1.4.1.868.2.5.4.1.3.1.1.5 | TruthValue | RW | |
column · TruthValue · read-write · current When set to true(1), a frame's Source MAC address decides the priority of the frame. The new priority value is assigned based on the priority assigned to that MAC address in the MAC forwarding database. | ||||
| CtnIfDstMACPriorityRemap | 1.3.6.1.4.1.868.2.5.4.1.3.1.1.6 | TruthValue | RW | |
column · TruthValue · read-write · current When set to true(1), a frame's Destination MAC address decides the priority of the frame. The new priority value is assigned based on the priority assigned to that MAC address in the MAC forwarding database. | ||||
| CtnIfVIDPriorityRemap | 1.3.6.1.4.1.868.2.5.4.1.3.1.1.7 | TruthValue | RW | |
column · TruthValue · read-write · current When set to true(1), a frame's VLAN id decides the priority of the frame. The new priority value is assigned based on the priority assigend to that VLAN id in the VLAN database. | ||||
| TtnIfPriorityRemapTable | 1.3.6.1.4.1.868.2.5.4.1.3.2 | NA | ||
table · not-accessible · current This table has entries for each interface's IEEE priority remapping. | ||||
| RtnIfPriorityRemapEntry | 1.3.6.1.4.1.868.2.5.4.1.3.2.1 | NA | ||
row · not-accessible · current A entry in the table represents Priority remapping for an interface.
| ||||
| CtnIfUserPriority | 1.3.6.1.4.1.868.2.5.4.1.3.2.1.1 | INTEGER (0..7) | RO | |
column · INTEGER (0..7) · read-only · current The priority found in the frames ingressing this interface. Frames which are untagged take up the interface's priority. | ||||
| CtnIfRemappedPriority | 1.3.6.1.4.1.868.2.5.4.1.3.2.1.2 | INTEGER (0..7) | RW | |
column · INTEGER (0..7) · read-write · current The frame's priority is remapped to this new priority value. Frames that egress tagged will have the remapped priority. | ||||
| NtnInterfaceVlanMgmt | 1.3.6.1.4.1.868.2.5.4.1.4 | |||
| TtnIfVLANTable | 1.3.6.1.4.1.868.2.5.4.1.4.1 | NA | ||
table · not-accessible · current This table has entries for interfaces which are VLAN capable. | ||||
| RtnIfVLANEntry | 1.3.6.1.4.1.868.2.5.4.1.4.1.1 | NA | ||
row · not-accessible · current A entry in the table represents VLAN configuration on an interface.
| ||||
| CtnIfDot1qState | 1.3.6.1.4.1.868.2.5.4.1.4.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The IEEE802.1Q status of this interface.
| ||||
| CtnIfDiscardTagged | 1.3.6.1.4.1.868.2.5.4.1.4.1.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current This filters all tagged non-management frames ingressing this port. All untagged and priority tagged frames are processed as normal frames. | ||||
| CtnIfDiscardUntagged | 1.3.6.1.4.1.868.2.5.4.1.4.1.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current This filters all untagged and priority tagged non-management frames ingressing this port. All frames .1Q tagged frames are processed as normal frames. | ||||
| CtnIfDefaultVlanId | 1.3.6.1.4.1.868.2.5.4.1.4.1.1.4 | INTEGER (0..4094) | RW | |
column · INTEGER (0..4094) · read-write · current The interface's default Vlan id. This VLAN id is given to untagged frames on ingress into the device. | ||||
| CtnIfForceDefaultVlanId | 1.3.6.1.4.1.868.2.5.4.1.4.1.1.5 | TruthValue | RW | |
column · TruthValue · read-write · current This forces all untagged and (802.1Q)tagged frames to take up the interface's ionIfDefaultVlanId. | ||||
| TtnIfVLANTagMgmtTable | 1.3.6.1.4.1.868.2.5.4.1.4.2 | NA | ||
table · not-accessible · current This table has entries for interfaces which are VLAN capable. | ||||
| RtnIfVLANTagMgmtEntry | 1.3.6.1.4.1.868.2.5.4.1.4.2.1 | NA | ||
row · not-accessible · current A entry in the table represents VLAN configuration on an interface.
| ||||
| CtnIfFrameTagMode | 1.3.6.1.4.1.868.2.5.4.1.4.2.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The interface's taggin mode. The interface can be set as :
network(1) - This is the normal network mode. It can take untagged
and 802.3ac tagged frames. In this mode, 802.1q can be
enabled on the interface. Frames with an ethertype of
0x8100 is considered as tagged.
provider(2) - In provider mode, frames are considered
provider tagged if it matches the 'ionIfProviderEtherType'.
Frames which are ingress with a provider tag, are stripped
of their provider tag on egressing this interface.
If the frame's ethertype doesnt match the 'ionIfProviderEtherType'
it is as untagged.
customer(3) - The customer mode is a normal access port which is not 802.1Q aware.
| ||||
| CtnIfProviderEtherType | 1.3.6.1.4.1.868.2.5.4.1.4.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This ether type is used when an interface is set to 'provider' mode. Frames are considered tagged only if the ether type matches this value.
| ||||
| CtnIfNetworkModeTagging | 1.3.6.1.4.1.868.2.5.4.1.4.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This is available only when 'ionIfFrameTagMode' is set to 'network(1)' mode. In unmodified(1) - Frames are unmodified, the egress the same as they ingress this interface removeTag(2) - Tagged frames are stripped of their tag, and are transmitted untagged addTag(3) - Untagged frames get tagged when they egress this interface.
| ||||
| TtnIfVLANTagMgmt2Table | 1.3.6.1.4.1.868.2.5.4.1.4.3 | NA | ||
table · not-accessible · current This table has entries for interfaces which are VLAN capable. | ||||
| RtnIfVLANTagMgmt2Entry | 1.3.6.1.4.1.868.2.5.4.1.4.3.1 | NA | ||
row · not-accessible · current A entry in the table represents VLAN configuration on an interface.
| ||||
| CtnIfVLANTagMgmt2PortType | 1.3.6.1.4.1.868.2.5.4.1.4.3.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current A Port can be one of the following types: Unaware, C-port, S-port, or S-custom-port where: - Unaware: all frames are classified to the Port VLAN ID and tags are not removed (default). - C-port: Customer port; with Customer tags (C-Tags), which use TPID 0x8100. - S-port: Service port; with Service tags (S-Tags), which use TPID 0x88A8 (IEEE 802.1ad). - S-custom-port: Custom Service port; with Service tags (S-Tags), which use a custom TPID assigned in tnSysVLANExtCustomSTag. For Customer tags and Service tags, both VLAN tags (tags with non-zero VID) and Priority tags (tags with VID = 0) are processed. The tag header is either retrieved from a tag in the incoming frame or from a default port-based tag header. The port-based tag header is configured in ieee8021QBridgePvid. For double-tagged frames, there is an option to use the inner tag instead of the outer tag. In addition to the tag header, the ingress port decides the number of VLAN tags to pop at egress. If the configured number of tags to pop is greater than the actual number of tags in the frame, the number is reduced to the actual number of tags in the frame.
| ||||
| CtnIfVLANTagMgmt2TxTagType | 1.3.6.1.4.1.868.2.5.4.1.4.3.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Determines egress tagging on a port:
- Untag_pvid - All frames with classified VLAN as the PVID egress as untagged frames.
- Tag_all - All frames which do not have a tag with classified vlan are tagged on egress.
An extra tag with ingress port PVID is added if the frames are already tagged.
- Untag_all - All frames tagged with the classified vlan id are untagged on egress.
| ||||
| CtnIfVLANTagMgmt2ConfigConflicts | 1.3.6.1.4.1.868.2.5.4.1.4.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Shows the status of Conflicts whether one exists or not. When a Volatile VLAN User requests to set VLAN membership or VLAN port configuration, the following conflicts can occur: - Functional Conflicts between features. - Conflicts due to hardware limitation. - Direct conflict between user modules.
| ||||
| CtnVlanConfigInterfaceMode | 1.3.6.1.4.1.868.2.5.4.1.4.3.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Determines the underlying port mode. Access ports are only members of one VLAN, the AccessVlan. Trunk ports are by default members of all VLANs, which can be limited with TrunkVlans. Hybrid ports allow for changing all port VLAN parameters. As trunk ports, hybrid ports are by default members of all VLANs, which can be limited with HybridVlans.
| ||||
| CtnVlanConfigInterfaceAllowVlans0KTo1K | 1.3.6.1.4.1.868.2.5.4.1.4.3.1.5 | TNVlanListQuarter | RW | |
column · TNVlanListQuarter · read-write · current First quarter of bit-array indicating whether the port is member of a
VLAN ('1') or not ('0'). Used when Mode is hybrid. | ||||
| CtnVlanConfigInterfaceAllowVlans1KTo2K | 1.3.6.1.4.1.868.2.5.4.1.4.3.1.6 | TNVlanListQuarter | RW | |
column · TNVlanListQuarter · read-write · current Second quarter of bit-array indicating whether the port is member of a
VLAN ('1') or not ('0'). Used when Mode is hybrid. | ||||
| CtnVlanConfigInterfaceAllowVlans2KTo3K | 1.3.6.1.4.1.868.2.5.4.1.4.3.1.7 | TNVlanListQuarter | RW | |
column · TNVlanListQuarter · read-write · current Third quarter of bit-array indicating whether the port is member of a
VLAN ('1') or not ('0'). Used when Mode is hybrid. | ||||
| CtnVlanConfigInterfaceAllowVlans3KTo4K | 1.3.6.1.4.1.868.2.5.4.1.4.3.1.8 | TNVlanListQuarter | RW | |
column · TNVlanListQuarter · read-write · current Last quarter of bit-array indicating whether the port is member of a
VLAN ('1') or not ('0'). Used when Mode is hybrid. | ||||
| CtnVlanConfigInterfaceForbiddenVlans0KTo1K | 1.3.6.1.4.1.868.2.5.4.1.4.3.1.9 | TNVlanListQuarter | RW | |
column · TNVlanListQuarter · read-write · current First quarter of bit-array indicating whether the port can ever become
a member of a VLAN ('0') or not ('1'). Used in all modes. | ||||
| CtnVlanConfigInterfaceForbiddenVlans1KTo2K | 1.3.6.1.4.1.868.2.5.4.1.4.3.1.10 | TNVlanListQuarter | RW | |
column · TNVlanListQuarter · read-write · current Second quarter of bit-array indicating whether the port can ever become
a member of a VLAN ('0') or not ('1'). Used in all modes. | ||||
| CtnVlanConfigInterfaceForbiddenVlans2KTo3K | 1.3.6.1.4.1.868.2.5.4.1.4.3.1.11 | TNVlanListQuarter | RW | |
column · TNVlanListQuarter · read-write · current Third quarter of bit-array indicating whether the port can ever become
a member of a VLAN ('0') or not ('1'). Used in all modes. | ||||
| CtnVlanConfigInterfaceForbiddenVlans3KTo4K | 1.3.6.1.4.1.868.2.5.4.1.4.3.1.12 | TNVlanListQuarter | RW | |
column · TNVlanListQuarter · read-write · current Last quarter of bit-array indicating whether the port can ever become a
member of a VLAN ('0') or not ('1'). Used in all modes. | ||||
| NtnVlanServiceMgmt | 1.3.6.1.4.1.868.2.5.4.1.5 | |||
| StnVlanServiceConnType | 1.3.6.1.4.1.868.2.5.4.1.5.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This defines the VLAN service type. The connection specified Port 1 and Port 2 configuration. customerProvider(1) : This sets the Port 1 to be customer facing port and Port 2 to be provider facing port. providerCustomer(2) : This sets the Port 1 to be provider facing port and Port 2 to be customer facing port.
| ||||
| StnVlanServiceVIDForTag | 1.3.6.1.4.1.868.2.5.4.1.5.2 | INTEGER (1..4094) | RW | |
scalar · INTEGER (1..4094) · read-write · current This Vlan id will be used when the service translation requires an extra tag to be added. | ||||
| StnVlanServiceEtherTypeForTag | 1.3.6.1.4.1.868.2.5.4.1.5.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current This Ethertype will be used when the service translation requires an extra tag to be added. Typical values are 0x8100 for IEEE 802.1Q tags, 0x88a8 for IEEE 802.1ad S-tags or other 2 byte private ethertype. | ||||
| StnVlanServiceTranslation | 1.3.6.1.4.1.868.2.5.4.1.5.4 | TnVlanServiceTranslationType | RW | |
scalar · TnVlanServiceTranslationType · read-write · current This determines the service or flow type between the two terminations.
The translation type as the flow passes the termination points from Customer edge to provider edge
are detailed below :
<----- Provider Side -----> <----- Customer Side ----->
Device
+------------------------------+
----> | P | | P | ---->
----> | o | | o | ---->
<---- | r | | r | <----
<---- | t | | t | <----
|(PE)| |(CE)|
+------------------------------+
noTranslation(1) :-
The ingress flow might contain any kind of frames, untagged or single or double tagged.
The egress flow will be exactly the same, no translation is done.
untaggedUntagged(2) :-
The traffic should be untagged, all tagged frames will be discarded.
The traffic that egress the device contain the untagged flow without any modification.
untaggedSingleTagged(3) :-
At the CE the traffic should be untagged.
At the PE the traffic will contain a single tag with the VID specified in tnVlanServiceVIDForTag.
singleTaggedSingleTagged(4) :-
The traffic should be single tagged on ingress and on egress with no translation.
singleTaggedTranslation(5) :-
The traffic should be single tagged on ingress and on egress.
The only changes from the singleTaggedSingleTagged(4), there is a translation.
The Vlan Id that came on ingress is translated to a different Vlan Id on egress.
singleTaggedDoubleTagged(6) :-
At the CE the traffic should be single tagged.
At the PE the traffic will contain an extra tag with the VID specified in tnVlanServiceVIDForTag.
doubleTaggedDoubleTagged(7) :-
The traffic should be double tagged on ingress and on egress with no translation.
doubleTaggedTranslation(8) :-
The traffic should be double tagged on ingress and on egress.
The only changes from the doubleTaggedDoubleTagged(7), there is a translation.
The Vlan Id in outer tag that came on CE is translated to a different Vlan Id on PE.
The inner tag remains intact.
addProviderTag(9) :-
This option adds an extra tag on the PE interface, no matter what kind of traffic at CE.
This strips the outer tag for traffic from PE interface egressing the CE interface. | ||||
| NtnVlanDbMgmt | 1.3.6.1.4.1.868.2.5.4.1.6 | |||
| TtnVLANDbTable | 1.3.6.1.4.1.868.2.5.4.1.6.1 | NA | ||
table · not-accessible · current This table contains all VLAN entries for this bridge. | ||||
| RtnVLANDbEntry | 1.3.6.1.4.1.868.2.5.4.1.6.1.1 | NA | ||
row · not-accessible · current A entry in the table represents a VLAN and the interfaces that are members of that VLAN.
| ||||
| CtnVlanDbVID | 1.3.6.1.4.1.868.2.5.4.1.6.1.1.1 | VlanIndex | RO | |
column · VlanIndex · read-only · current The VLAN ID of the entry. | ||||
| CtnVlanDbFID | 1.3.6.1.4.1.868.2.5.4.1.6.1.1.2 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current The Forwarding Database number for this VLAN. | ||||
| CtnVlanDbVIDPriOverride | 1.3.6.1.4.1.868.2.5.4.1.6.1.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Override Priority on frames assosicated with this VID.
| ||||
| CtnVlanDbVIDPriority | 1.3.6.1.4.1.868.2.5.4.1.6.1.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Priority for frames assosicated with this VID. | ||||
| CtnVlanDbMemTagPort1 | 1.3.6.1.4.1.868.2.5.4.1.6.1.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current Membership and Egress Tagging on Logical Port 1.
memEgressNoMode(1)- Port 1 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 1 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 1 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 1 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port.
| ||||
| CtnVlanDbMemTagPort2 | 1.3.6.1.4.1.868.2.5.4.1.6.1.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Membership and Egress Tagging on Logical Port 2.
memEgressNoMode(1)- Port 2 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 2 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 2 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 2 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port.
| ||||
| CtnVlanDbMemTagPort3 | 1.3.6.1.4.1.868.2.5.4.1.6.1.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current Membership and Egress Tagging on Logical Port 3.
memEgressNoMode(1)- Port 3 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 3 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 3 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 3 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port.
| ||||
| CtnVlanDbMemTagPort4 | 1.3.6.1.4.1.868.2.5.4.1.6.1.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current Membership and Egress Tagging on Logical Port 4.
memEgressNoMode(1)- Port 4 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 4 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 4 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 4 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port.
| ||||
| CtnVlanDbMemTagPort5 | 1.3.6.1.4.1.868.2.5.4.1.6.1.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current Membership and Egress Tagging on Logical Port 5.
memEgressNoMode(1)- Port 5 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 5 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 5 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 5 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port.
| ||||
| CtnVlanDbMemTagPort6 | 1.3.6.1.4.1.868.2.5.4.1.6.1.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current Membership and Egress Tagging on Logical Port 6.
memEgressNoMode(1)- Port 6 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 6 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 6 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 6 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port.
| ||||
| CtnVlanDbMemTagPort7 | 1.3.6.1.4.1.868.2.5.4.1.6.1.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current Membership and Egress Tagging on Logical Port 7.
memEgressNoMode(1)- Port 7 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 7 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 7 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 7 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port.
| ||||
| CtnVlanDbMemTagPort8 | 1.3.6.1.4.1.868.2.5.4.1.6.1.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current Membership and Egress Tagging on Logical Port 8.
memEgressNoMode(1)- Port 8 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 8 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 8 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 8 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port.
| ||||
| CtnVlanDbMemTagPort9 | 1.3.6.1.4.1.868.2.5.4.1.6.1.1.13 | INTEGER | RC | |
column · INTEGER · read-create · current Membership and Egress Tagging on Logical Port 9.
memEgressNoMode(1)- Port 9 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 9 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 9 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 9 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port.
| ||||
| CtnVlanDbMemTagPort10 | 1.3.6.1.4.1.868.2.5.4.1.6.1.1.14 | INTEGER | RC | |
column · INTEGER · read-create · current Membership and Egress Tagging on Logical Port 10.
memEgressNoMode(1)- Port 10 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 10 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 10 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 10 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port.
| ||||
| CtnVlanDbRowStatus | 1.3.6.1.4.1.868.2.5.4.1.6.1.1.15 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this VLAN entry in the VLAN database. | ||||
| NtnVLANDbFlush | 1.3.6.1.4.1.868.2.5.4.1.6.2 | |||
| StnVLANDbFlushOperation | 1.3.6.1.4.1.868.2.5.4.1.6.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set this viarable to: flushAll(2): flush all VLAN entries except default VLAN 1. This variable can't be set if the 'tnVLANDbFlushOperationStatus' is 'inProgress(4)'. Do getting to this variable: If an operation is being processed, the operation being processed is returned. If no operation is being processed, 'doNothing(1)' is returned.
| ||||
| StnVLANDbFlushOperationStatus | 1.3.6.1.4.1.868.2.5.4.1.6.2.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The VLAN database flush operation status.
unknown(1): no flush operation has been performed.
success(2)/failure(3): the last flush operation is finished, success(2)
indicates the last flush operation is successful. failure(3)
indicates the last flush operation fails.
inProgress(4): flush operation is in progress.
| ||||
| StnVLANDbFlushOperationFailureReason | 1.3.6.1.4.1.868.2.5.4.1.6.2.3 | DisplayString (SIZE (0..63)) | RO | |
scalar · DisplayString (SIZE (0..63)) · read-only · current Specifies the description of the cause of 'failure(3)' state of the object 'tnVLANDbFlushOperationStatus'. This object would be a null string if value of 'tnVLANDbFlushOperationStatus' is anything other than 'failure(3)'. | ||||
| NtnFIDDbMgmt | 1.3.6.1.4.1.868.2.5.4.1.7 | |||
| TtnFIDDbTable | 1.3.6.1.4.1.868.2.5.4.1.7.1 | NA | ||
table · not-accessible · current The forwarding/filtering address database for this device. | ||||
| RtnFIDDbEntry | 1.3.6.1.4.1.868.2.5.4.1.7.1.1 | NA | ||
row · not-accessible · current Information about a particular MAC address.
| ||||
| CtnFIDDbID | 1.3.6.1.4.1.868.2.5.4.1.7.1.1.2 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current The Forwarding Database Number. This identifies the database. | ||||
| CtnFIDDbMacAddress | 1.3.6.1.4.1.868.2.5.4.1.7.1.1.3 | MacAddress | RO | |
column · MacAddress · read-only · current The unicast or multicast MAC address that the device has forwarding information. | ||||
| CtnFIDDbConnPort | 1.3.6.1.4.1.868.2.5.4.1.7.1.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current The index of the logical Port from which the device received the 'tnFIDDbMacAddress'. | ||||
| CtnFIDDbPriority | 1.3.6.1.4.1.868.2.5.4.1.7.1.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current The priority of this MAC entry. | ||||
| CtnFIDDbEntryType | 1.3.6.1.4.1.868.2.5.4.1.7.1.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current The Entry state of this unicast or multicast entry.
The types represent :
static(1) - A Valid entry that doesnot age.
staticNRL(2) - A static entry that has no ingress rate limiting.
staticPA(3) - A static entry that has priority override enabled.
dynamic(4) - A valid entry with no special attributes which
ages and finally removed from the database.
A unicast entry can be static(1) or staticPA(3) but not
staticNRL(2). For MAC address which are learned, the read-only value
of dynamic(4) is returned.
| ||||
| CtnFIDDbEntryStatus | 1.3.6.1.4.1.868.2.5.4.1.7.1.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this entry. | ||||
| NtnFIDDbFlush | 1.3.6.1.4.1.868.2.5.4.1.7.2 | |||
| StnFIDDbFlushFID | 1.3.6.1.4.1.868.2.5.4.1.7.2.1 | INTEGER (0..4094) | RW | |
scalar · INTEGER (0..4094) · read-write · current When 'tnFIDDbFlushOperation' is 'flushAllFID(3)' or 'flushAllDynamicFID(4)', the value(1..4094) of this viarable is used to specify the FID to be flushed. The value 0 of this virable means no FID is specified. | ||||
| StnFIDDbFlushOperation | 1.3.6.1.4.1.868.2.5.4.1.7.2.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set this viarable to:
flushAll(2): flush all FID entries for all FIDs.
flushAllDynamic(3): flush all FID dynamic entries for all FIDs.
flushAllFID(4): flush all FID entries for one FID which is specified
by ionFIDDbFlushFID.
flushAllDynamicFID(5): flush all FID dynamic entries for one FID which
is specified by ionFIDDbFlushFID.
This variable can't be set if the 'ionFIDDbFlushOperationStatus'
is 'inProgress(4)'.
Do getting to this variable:
If an operation is being processed, the operation being processed is returned.
If no operation is being processed, 'doNothing(1)' is returned.
| ||||
| StnFIDDbFlushOperationStatus | 1.3.6.1.4.1.868.2.5.4.1.7.2.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The FID database flush operation status.
unknown(1): no flush operation has been performed.
success(2)/failure(3): the last flush operation is finished, success(2)
indicates the last flush operation is successful. failure(3)
indicates the last flush operation fails.
inProgress(4): flush operation is in progress.
| ||||
| StnFIDDbFlushOperationFailureReason | 1.3.6.1.4.1.868.2.5.4.1.7.2.4 | DisplayString (SIZE (0..63)) | RO | |
scalar · DisplayString (SIZE (0..63)) · read-only · current Specifies the description of the cause of 'failure(3)' state of the object 'ionFIDDbFlushOperationStatus'. This object would be a null string if value of 'ionFIDDbFlushOperationStatus' is anything other than 'failure(3)'. | ||||
| NtnVclMgmt | 1.3.6.1.4.1.868.2.5.4.1.8 | |||
| NtnVclMacBasedMgmt | 1.3.6.1.4.1.868.2.5.4.1.8.1 | |||
| TtnVclMacBasedTable | 1.3.6.1.4.1.868.2.5.4.1.8.1.1 | NA | ||
table · not-accessible · current This table is used to control MAC based Vlan functions. | ||||
| RtnVclMacBasedEntry | 1.3.6.1.4.1.868.2.5.4.1.8.1.1.1 | NA | ||
row · not-accessible · current A entry in the table is used to control MAC based Vlan functions.
| ||||
| CtnVclMacBasedMacAddr | 1.3.6.1.4.1.868.2.5.4.1.8.1.1.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current The MAC address is used for the MAC based VLAN function classification key. | ||||
| CtnVclMacBasedVlanId | 1.3.6.1.4.1.868.2.5.4.1.8.1.1.1.2 | VlanIndex | RC | |
column · VlanIndex · read-create · current The Vlan Id will be assigned to the incoming frame(if needed) which matches this specific MAC address and port member list. | ||||
| CtnVclMacBasedPortMember | 1.3.6.1.4.1.868.2.5.4.1.8.1.1.1.3 | PortList | RC | |
column · PortList · read-create · current The member port list of this specific MAC based Vlan match process takes place. | ||||
| CtnVclMacBasedUser | 1.3.6.1.4.1.868.2.5.4.1.8.1.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The creater of this entry. The MAC based VLAN entry is either created by user configuration(static), or by NAS dynamic creation(nas).
| ||||
| CtnVclMacBasedRowStatus | 1.3.6.1.4.1.868.2.5.4.1.8.1.1.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this entry. | ||||
| NtnVclProtoBasedMgmt | 1.3.6.1.4.1.868.2.5.4.1.8.2 | |||
| TtnVclProtoBasedGroupMapTable | 1.3.6.1.4.1.868.2.5.4.1.8.2.1 | NA | ||
table · not-accessible · current This table is used to build a specific protocol group for VCL match process. | ||||
| RtnVclProtoBasedGroupMapEntry | 1.3.6.1.4.1.868.2.5.4.1.8.2.1.1 | NA | ||
row · not-accessible · current A entry in this table is used to build a specific protocol group for VCL match process. | ||||
| CtnVclProtoBasedGroupMapName | 1.3.6.1.4.1.868.2.5.4.1.8.2.1.1.1 | SnmpAdminString | NA | |
column · SnmpAdminString · not-accessible · current The locally arbitrary, but unique identifier associated with this TnVclProtoBasedGroupMapEntry. | ||||
| CtnVclProtoBasedGroupMapProtocol | 1.3.6.1.4.1.868.2.5.4.1.8.2.1.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Frame Type can have one of the following values: 1. Ethernet 2. SNAP 3. LLC
| ||||
| CtnVclProtoBasedGroupMapEtherTypeVal | 1.3.6.1.4.1.868.2.5.4.1.8.2.1.1.3 | INTEGER (1536..65535) | RC | |
column · INTEGER (1536..65535) · read-create · current Ethernet Type is valid only if the tnVclProtoBasedGroupMapProtocol is ethernet(1). Valid values for etype ranges is from 0x0600-0xffff. If tnVclProtoBasedGroupMapProtocol is not ethernet(1), this value will be 0xffff instead. | ||||
| CtnVclProtoBasedGroupMapSnapOui | 1.3.6.1.4.1.868.2.5.4.1.8.2.1.1.4 | EightOTwoOui | RC | |
column · EightOTwoOui · read-create · current SNAP OUI is valid only if the tnVclProtoBasedGroupMapProtocol is snap(2). OUI (Organizationally Unique Identifier) is value in format of xx-xx-xx where each pair (xx) in string is a hexadecimal value ranges from 0x00-0xff. If tnVclProtoBasedGroupMapProtocol is not snap(2), this value will be FF-FF-FF instead. | ||||
| CtnVclProtoBasedGroupMapSnapPid | 1.3.6.1.4.1.868.2.5.4.1.8.2.1.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current SNAP PID is valid only if the tnVclProtoBasedGroupMapProtocol is snap(2). If the OUI is hexadecimal 000000, the protocol ID is the Ethernet type (EtherType) field value for the protocol running on top of SNAP; if the OUI is an OUI for a particular organization, the protocol ID is a value assigned by that organization to the protocol running on top of SNAP. In other words, if value of OUI field is 00-00-00 then value of PID will be etype (0x0600-0xffff) and if value of OUI is other than 00-00-00 then valid value of PID will be any value from 0x0000 to 0xffff. If tnVclProtoBasedGroupMapProtocol is not snap(2), this value will be 0xffff instead. | ||||
| CtnVclProtoBasedGroupMapLlcDsap | 1.3.6.1.4.1.868.2.5.4.1.8.2.1.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current LLC DSAP is valid only if the tnVclProtoBasedGroupMapProtocol is llc(3). DSAP: 1-byte long string (0x00-0xff). If tnVclProtoBasedGroupMapProtocol is not llc(3), this value will be 0xff instead. | ||||
| CtnVclProtoBasedGroupMapLlcSsap | 1.3.6.1.4.1.868.2.5.4.1.8.2.1.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current LLC SSAP is valid only if the tnVclProtoBasedGroupMapProtocol is llc(3). SSAP: 1-byte long string (0x00-0xff). If tnVclProtoBasedGroupMapProtocol is not llc(3), this value will be 0xff instead. | ||||
| CtnVclProtoBasedGroupMapRowStatus | 1.3.6.1.4.1.868.2.5.4.1.8.2.1.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this entry. | ||||
| TtnVclProtoBasedVlanMapTable | 1.3.6.1.4.1.868.2.5.4.1.8.2.2 | NA | ||
table · not-accessible · current The table is used to associate the protocol based VLAN groups with VLAN paramaters. | ||||
| RtnVclProtoBasedVlanMapEntry | 1.3.6.1.4.1.868.2.5.4.1.8.2.2.1 | NA | ||
row · not-accessible · current A entry in this table is used to associate the protocol based VLAN groups with VLAN paramaters. | ||||
| CtnVclProtoBasedVlanMapVlanId | 1.3.6.1.4.1.868.2.5.4.1.8.2.2.1.1 | VlanIndex | RC | |
column · VlanIndex · read-create · current The Vlan Id will be assigned to the incoming frame(if needed) which matches this specific Protocol Group and port member list. | ||||
| CtnVclProtoBasedVlanMapPortMember | 1.3.6.1.4.1.868.2.5.4.1.8.2.2.1.2 | PortList | RC | |
column · PortList · read-create · current The member port list of this specific Protocol based Vlan match process takes place. | ||||
| CtnVclProtoBasedVlanMapRowStatus | 1.3.6.1.4.1.868.2.5.4.1.8.2.2.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this entry. | ||||
| NtnVclIpSubnetBasedMgmt | 1.3.6.1.4.1.868.2.5.4.1.8.3 | |||
| TtnVclIpSubnetBasedTable | 1.3.6.1.4.1.868.2.5.4.1.8.3.1 | NA | ||
table · not-accessible · current This Table is used to control IP subnet based VLAN functions. | ||||
| RtnVclIpSubnetBasedEntry | 1.3.6.1.4.1.868.2.5.4.1.8.3.1.1 | NA | ||
row · not-accessible · current A entry in this table is used to control IP subnet based VLAN functions. | ||||
| CtnVclIpSubnetBasedVceId | 1.3.6.1.4.1.868.2.5.4.1.8.3.1.1.1 | INTEGER (1..11111) | NA | |
column · INTEGER (1..11111) · not-accessible · current Indicates the index of the entry. The valid range is implement specific. If VCE ID is 0, application will auto-generate the VCE ID for that entry. | ||||
| CtnVclIpSubnetBasedIpAddr | 1.3.6.1.4.1.868.2.5.4.1.8.3.1.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current Indicates the IP address for match process. | ||||
| CtnVclIpSubnetBasedMaskLen | 1.3.6.1.4.1.868.2.5.4.1.8.3.1.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates the network mask length. | ||||
| CtnVclIpSubnetBasedVlanId | 1.3.6.1.4.1.868.2.5.4.1.8.3.1.1.4 | VlanIndex | RC | |
column · VlanIndex · read-create · current The Vlan Id will be assigned to the incoming frame(if needed) which matches this specific IP subnet and port member list. | ||||
| CtnVclIpSubnetBasedPortMember | 1.3.6.1.4.1.868.2.5.4.1.8.3.1.1.5 | PortList | RC | |
column · PortList · read-create · current The member port list of this specific IP subnet based Vlan match process takes place. | ||||
| CtnVclIpSubnetBasedRowStatus | 1.3.6.1.4.1.868.2.5.4.1.8.3.1.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this entry. | ||||
| NtnVlanMQoSgmtConformance | 1.3.6.1.4.1.868.2.5.4.2 | |||
Textual conventions
TNVlanListQuarterOCTET STRING (SIZE (128))Display hint:
128xA list representing 1024 VLAN IDs. The type should be interpreted as a sequence of bits, each bit representing one VLAN ID. If a bit is set (1) the represented VLAN is included in the VLAN list. If a bit is not set (0) the represented VLAN is not included in the VLAN list. The least significant bit of each byte represents a smaller VLAN ID than a more significant bit of a byte. If for example the VLAN list represents VLAN IDs from 0 to 1023, bit 0 of the first byte represents VLAN ID 0, bit 1 of the first byte represents VLAN ID 1, and so on. The most significant bit of the 128th byte therefore represents VLAN ID 1023. An implementation that needs to represent all 4K VLANs will divide the VLAN list into four equally sized objects. VLAN ID 0 is included in the first object even though it is not used.
TnVlanServiceTranslationTypeINTEGERaddProviderTag(9)doubleTaggedDoubleTagged(7)doubleTaggedTranslation(8)noTranslation(1)singleTaggedDoubleTagged(6)singleTaggedSingleTagged(4)singleTaggedTranslation(5)untaggedSingleTagged(3)untaggedUntagged(2)T
Traps / Notifications
- tnIfSourceAddrChangeEvt
1.3.6.1.4.1.868.2.5.4.0.1