TN-THERMAL-PROTECTION-MIB
Transition Engineering Inc.The mib module for thermal protection on ports
snmptranslate -m TN-THERMAL-PROTECTION-MIB -Tpsnmpwalk -v2c -c <community> -m TN-THERMAL-PROTECTION-MIB <host> 1.3.6.1.4.1.868.2.5.32Imports
| ENTITY-MIB | entPhysicalIndex |
|---|---|
| IF-MIB | InterfaceIndex, ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
| TRANSITION-SMI | tnProducts |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| ItnThermalProtectionMIB | 1.3.6.1.4.1.868.2.5.32 | |||
identity The mib module for thermal protection on ports | ||||
| NtnThermalProtectionMIBNotifications | 1.3.6.1.4.1.868.2.5.32.0 | |||
| !tnThermalProtectionPortStatusChangedNotification | 1.3.6.1.4.1.868.2.5.32.0.1 | |||
notification · current A notification generated by the local device sensing a change in the thermal protection port status. The change indicates the current temperature of a port turns to be higher, or lower, than its priority temperature. | ||||
| NtnThermalProtectionMIBObjects | 1.3.6.1.4.1.868.2.5.32.1 | |||
| NtnThermalProtectionMgmt | 1.3.6.1.4.1.868.2.5.32.1.1 | |||
| TtnThermalProtectionPriorityTable | 1.3.6.1.4.1.868.2.5.32.1.1.1 | NA | ||
table · not-accessible · current This table is for user to configure the temperature and its priority which the ports belong to. | ||||
| RtnThermalProtectionPriorityEntry | 1.3.6.1.4.1.868.2.5.32.1.1.1.1 | NA | ||
row · not-accessible · current Each entry represents a temperature and its priority, 4 priorities are supported. | ||||
| CtnThermalProtectionPriorityIndex | 1.3.6.1.4.1.868.2.5.32.1.1.1.1.1 | INTEGER (0..3) | RO | |
column · INTEGER (0..3) · read-only · current The priority the port belongs to. 4 priorities are supported. | ||||
| CtnThermalProtectionPriorityTemperature | 1.3.6.1.4.1.868.2.5.32.1.1.1.1.2 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current The temperature at which the ports with the corresponding priority will be turned off. Temperatures between 0 and 255 C are supported. | ||||
| TtnThermalProtectionIfTable | 1.3.6.1.4.1.868.2.5.32.1.1.2 | NA | ||
table · not-accessible · current This table lets user to configure the temperature priority of each port for thermal protection. When the temperature exceeds the configured thermal protection temperature, ports will be turned off in order to protect the chip from getting overheated or decrease the power consumption. | ||||
| RtnThermalProtectionIfEntry | 1.3.6.1.4.1.868.2.5.32.1.1.2.1 | NA | ||
| CtnThermalProtectionIfPriority | 1.3.6.1.4.1.868.2.5.32.1.1.2.1.1 | INTEGER (0..3) | RW | |
column · INTEGER (0..3) · read-write · current The temperature priority of current port belongs to. Refer to tnThermalProtectionPriorityIndex | ||||
| TtnThermalProtectionIfStatusTable | 1.3.6.1.4.1.868.2.5.32.1.1.3 | NA | ||
table · not-accessible · current This table allows the user to inspect status information related to thermal protection. | ||||
| RtnThermalProtectionIfStatusEntry | 1.3.6.1.4.1.868.2.5.32.1.1.3.1 | NA | ||
| CtnThermalProtectionIfStatusTemperature | 1.3.6.1.4.1.868.2.5.32.1.1.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Shows the current chip temperature in degrees Celsius. | ||||
| CtnThermalProtectionIfStatusCode | 1.3.6.1.4.1.868.2.5.32.1.1.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Shows if the port is thermally protected (link is down) or if the port is operating normally.
| ||||
Traps / Notifications
- tnThermalProtectionPortStatusChangedNotification
1.3.6.1.4.1.868.2.5.32.0.1