TN-SYNCE-MIB
Transition Engineering Inc.The mib provides functionalities for managing SyncE.
snmptranslate -m TN-SYNCE-MIB -Tpsnmpwalk -v2c -c <community> -m TN-SYNCE-MIB <host> 1.3.6.1.4.1.868.2.5.122Imports
| ENTITY-MIB | MODULE-IDENTITY, OBJECT-IDENTITY, entPhysicalIndex |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
| TRANSITION-SMI | tnProducts |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| ItnSynceMIB | 1.3.6.1.4.1.868.2.5.122 | |||
identity The mib provides functionalities for managing SyncE. | ||||
| NtnSynce | 1.3.6.1.4.1.868.2.5.122.1 | |||
| TtnSyncETable | 1.3.6.1.4.1.868.2.5.122.1.1 | NA | ||
table · not-accessible · current Table to manage SyncE for each device. | ||||
| RtnSyncEEntry | 1.3.6.1.4.1.868.2.5.122.1.1.1 | NA | ||
| CtnSyncEStateMode | 1.3.6.1.4.1.868.2.5.122.1.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Clock source selection mode manual: Selector is manually set to the chosen clock source selected: Selector is manually set to the pt. selected clock source (not possible in unlocked mode) nonrevertive: Selector is automatically selecting the best clock source - non revertively revertive: Selector is automatically selecting the best clock source - revertively holdover: Selector is forced in holdover freerun: Selector is forced in free run
| ||||
| CtnSyncEStateWTRTime | 1.3.6.1.4.1.868.2.5.122.1.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current WTR (Wait-to-Restore) time in minutes(0-12 min) '0' is disable | ||||
| CtnSyncEStateSSMHoldOver | 1.3.6.1.4.1.868.2.5.122.1.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Synchronization Status Messaging Hold Over. Hold Over is switching over to Local Reference Clock if primary and secondary nodes fail prc = Primary Reference Clock eec2 Ethernet Equipment Clock 1.544 kpbs eec1 Ethernet Equipment Clock 2.048 kpbs
| ||||
| CtnSyncEStateSSMFreeRun | 1.3.6.1.4.1.868.2.5.122.1.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Synchronization Status Messaging Free Run
| ||||
| CtnSyncEAlarmStateLOL | 1.3.6.1.4.1.868.2.5.122.1.1.1.5 | TruthValue | RO | |
column · TruthValue · read-only · current Alarm State Loss of Lock (LOL) | ||||
| CtnSyncEAlarmStateDHOLD | 1.3.6.1.4.1.868.2.5.122.1.1.1.6 | TruthValue | RO | |
column · TruthValue · read-only · current Alarm State Digital Hold (DHOLD) | ||||
| CtnSyncESelState | 1.3.6.1.4.1.868.2.5.122.1.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Clock Selection State Note: prelock2, prelock and lossoflock are not available on all products
| ||||
| CtnSyncEClkSrc | 1.3.6.1.4.1.868.2.5.122.1.1.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Clock Source | ||||
| TtnSyncEClkSourceTable | 1.3.6.1.4.1.868.2.5.122.1.2 | NA | ||
table · not-accessible · current Table of SyncE ClkSource | ||||
| RtnSyncEClkSourceEntry | 1.3.6.1.4.1.868.2.5.122.1.2.1 | NA | ||
row · not-accessible · current An entry in the table,tnSyncEClkSourceTable | ||||
| CtnSyncEClkSourceIndex | 1.3.6.1.4.1.868.2.5.122.1.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Index of SyncE ClkSource table. 1-SYNCE_NOMINATED_MAX | ||||
| CtnSyncEConfPort | 1.3.6.1.4.1.868.2.5.122.1.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current SyncE Configuration Port. 0-MAX_PORT. a port value of 0 means not nominated | ||||
| CtnSyncEConfSSMOverwrite | 1.3.6.1.4.1.868.2.5.122.1.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Clock source SSM overwrite
| ||||
| CtnSyncEConfHoldOff | 1.3.6.1.4.1.868.2.5.122.1.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The hold off timer value in 100 ms. Valid values are: 0 for disable. The range 3-18. The value 100 for test | ||||
| CtnSyncEConfANEG | 1.3.6.1.4.1.868.2.5.122.1.2.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Auto Negotiate : 1000BaseT ANEG mode slave: Activate prefer slave negotiation master: Activate prefer master negotiation forced: Activate forced slave negotiation.
| ||||
| CtnSyncEPriority | 1.3.6.1.4.1.868.2.5.122.1.2.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Clock source priority setting. (SYNCE_PRIORITY_MAX = CLOCK_INPUT_MAX = 2 i.e. 0,1) | ||||
| CtnSyncEClear | 1.3.6.1.4.1.868.2.5.122.1.2.1.7 | TruthValue | RW | |
column · TruthValue · read-write · current SyncE Clear. | ||||
| CtnSyncEAlarmStateLOCS | 1.3.6.1.4.1.868.2.5.122.1.2.1.8 | TruthValue | RO | |
column · TruthValue · read-only · current SyncE Alarm State LOCS. | ||||
| CtnSyncEAlarmStateSSM | 1.3.6.1.4.1.868.2.5.122.1.2.1.9 | TruthValue | RO | |
column · TruthValue · read-only · current SyncE Alarm State SSM. | ||||
| CtnSyncEAlarmStateWTR | 1.3.6.1.4.1.868.2.5.122.1.2.1.10 | TruthValue | RO | |
column · TruthValue · read-only · current SyncE Alarm State WRT. | ||||
| CtnSyncENominated | 1.3.6.1.4.1.868.2.5.122.1.2.1.11 | TruthValue | RW | |
column · TruthValue · read-write · current SyncE Nominated. | ||||
| TtnSyncEPortTable | 1.3.6.1.4.1.868.2.5.122.1.3 | NA | ||
table · not-accessible · current Table of SyncEPort. | ||||
| RtnSyncEPortEntry | 1.3.6.1.4.1.868.2.5.122.1.3.1 | NA | ||
row · not-accessible · current An entry containing tnSynce. | ||||
| CtnSyncEStatePortIndex | 1.3.6.1.4.1.868.2.5.122.1.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current SyncE Port index, 0-SYNCE_PORT_COUNT. | ||||
| CtnSyncEStateTxSSM | 1.3.6.1.4.1.868.2.5.122.1.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current SyncE Transmit SSM State.
| ||||
| CtnSyncEStateRxSSM | 1.3.6.1.4.1.868.2.5.122.1.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current SyncE Receive SSM State.
| ||||
| CtnSyncEStateSSMMode | 1.3.6.1.4.1.868.2.5.122.1.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current SyncE SSM Mode.
| ||||
| CtnSyncESSMEnabled | 1.3.6.1.4.1.868.2.5.122.1.3.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current SyncE SSM Enabled.
| ||||
| TtnSyncEExtTable | 1.3.6.1.4.1.868.2.5.122.1.4 | NA | ||
table · not-accessible · current Table of SyncE External I/O | ||||
| RtnSyncEExtEntry | 1.3.6.1.4.1.868.2.5.122.1.4.1 | NA | ||
| CtnSyncEExtInState | 1.3.6.1.4.1.868.2.5.122.1.4.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current External I/O in direction state.
| ||||
| CtnSyncEExtOutState | 1.3.6.1.4.1.868.2.5.122.1.4.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current External I/O out direction state.
| ||||
| CtnSyncEExtInFreq | 1.3.6.1.4.1.868.2.5.122.1.4.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current External I/O in direction frequency 8k-25Mhz table of values.
| ||||
| CtnSyncEExtOutFreq | 1.3.6.1.4.1.868.2.5.122.1.4.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current External I/O out direction frequency 8k-25Mhz table of values
| ||||
| CtnSyncEExtImpedance | 1.3.6.1.4.1.868.2.5.122.1.4.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current External I/O Impedance.
| ||||
| CtnSyncEActualInFreq | 1.3.6.1.4.1.868.2.5.122.1.4.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The actual input frequency in Hz. | ||||
| CtnSyncEActualOutFreq | 1.3.6.1.4.1.868.2.5.122.1.4.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The actual output frequency in Hz. If output state is disabled set to 0 | ||||