TN-QOS-EXT-MIB
Transition Engineering Inc.The mib module for managing extra QoS features in TN platform products.
snmptranslate -m TN-QOS-EXT-MIB -Tpsnmpwalk -v2c -c <community> -m TN-QOS-EXT-MIB <host> 1.3.6.1.4.1.868.2.5.9Imports
| ENTITY-MIB | entPhysicalIndex |
|---|---|
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero, ifIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| Q-BRIDGE-MIB | PortList, VlanIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeInterval, TruthValue |
| TRANSITION-SMI | tnProducts |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| ItnQosExtMIB | 1.3.6.1.4.1.868.2.5.9 | |||
identity The mib module for managing extra QoS features in TN platform products. | ||||
| NtnQosExtMIBObjects | 1.3.6.1.4.1.868.2.5.9.1 | |||
| NtnQosExtPortMgmt | 1.3.6.1.4.1.868.2.5.9.1.1 | |||
| TtnQosExtPortPolicerTable | 1.3.6.1.4.1.868.2.5.9.1.1.1 | NA | ||
table · not-accessible · current A port policer table can limit the bandwidth of received frames per port. | ||||
| RtnQosExtPortPolicerEntry | 1.3.6.1.4.1.868.2.5.9.1.1.1.1 | NA | ||
row · not-accessible · current An entry in the table controls the bandwidth of received frames per port. It is located in front of the ingress queue.
| ||||
| CtnQosExtPortPolicerStatus | 1.3.6.1.4.1.868.2.5.9.1.1.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Controls the per port policer status. The policer can limit the bandwidth of received frames. It is located in front of the Ingress queue.
| ||||
| CtnQosExtPortPolicerRate | 1.3.6.1.4.1.868.2.5.9.1.1.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Controls the rate for the port policer. The rate unit is defined in tnQosExtPortPolicerUnit. | ||||
| CtnQosExtPortPolicerUnit | 1.3.6.1.4.1.868.2.5.9.1.1.1.1.3 | TnQosExtRateUnitType | RW | |
column · TnQosExtRateUnitType · read-write · current the rate unit for the port policer. Depend on the implement, some unit type may not be supported. | ||||
| CtnQosExtPortPolicerFlowControl | 1.3.6.1.4.1.868.2.5.9.1.1.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Controls the port policer flow control. If policer flow control is enabled and the port is in flow control mode, then pause frames are sent instead of discarding frames.
| ||||
| TtnQosExtPortQueuePolicerTable | 1.3.6.1.4.1.868.2.5.9.1.1.2 | NA | ||
table · not-accessible · current A port queue policer table can limit the bandwidth of received frames per port per queue. | ||||
| RtnQosExtPortQueuePolicerEntry | 1.3.6.1.4.1.868.2.5.9.1.1.2.1 | NA | ||
row · not-accessible · current An entry in the table controls the bandwidth of received frames per port per queue. It is located in front of the ingress queue. | ||||
| CtnQosExtPortQueuePolicerQid | 1.3.6.1.4.1.868.2.5.9.1.1.2.1.1 | INTEGER (1..11111) | NA | |
column · INTEGER (1..11111) · not-accessible · current The ingress queue id for queue policer. tnQosExtPortQueuePolicerQid is a number in the range (0..(dot1dPortNumTrafficClasses-1)) | ||||
| CtnQosExtPortQueuePolicerStatus | 1.3.6.1.4.1.868.2.5.9.1.1.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Controls whether the policer is enabled on the specific queue.
| ||||
| CtnQosExtPortQueuePolicerRate | 1.3.6.1.4.1.868.2.5.9.1.1.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Controls the rate for the queue policer. The rate unit is defined in tnQosExtPortQueuePolicerUnit. | ||||
| CtnQosExtPortQueuePolicerUnit | 1.3.6.1.4.1.868.2.5.9.1.1.2.1.4 | TnQosExtRateUnitType | RW | |
column · TnQosExtRateUnitType · read-write · current The rate unit for the queue policer. Depend on the implement, some unit type may not be supported. | ||||
| TtnQosExtPortSchedulerTable | 1.3.6.1.4.1.868.2.5.9.1.1.3 | NA | ||
table · not-accessible · current A port scheduler table controls the egress queue scheduler method per port. | ||||
| RtnQosExtPortSchedulerEntry | 1.3.6.1.4.1.868.2.5.9.1.1.3.1 | NA | ||
row · not-accessible · current An entry in the table controls the egress queue scheduler method per port.
| ||||
| CtnQosExtPortSchedulerMode | 1.3.6.1.4.1.868.2.5.9.1.1.3.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Controls the port egress scheduler mode, strict or weighted.
| ||||
| CtnQosExtPortSchedulerQueueMask | 1.3.6.1.4.1.868.2.5.9.1.1.3.1.2 | Bits | RW | |
column · Bits · read-write · current Controls the queues mask which is in the weighted schedule mode. Other queues are in strict mode.
| ||||
| TtnQosExtPortSchedulerWeightTable | 1.3.6.1.4.1.868.2.5.9.1.1.4 | NA | ||
table · not-accessible · current A port scheduler weight table controls the egress queue weight value in weighted scheduler mode per port. | ||||
| RtnQosExtPortSchedulerWeightEntry | 1.3.6.1.4.1.868.2.5.9.1.1.4.1 | NA | ||
row · not-accessible · current An entry in the table controls the egress queue weight value in weighted scheduler mode per port. | ||||
| CtnQosExtPortSchedulerWeightQid | 1.3.6.1.4.1.868.2.5.9.1.1.4.1.1 | INTEGER (1..11111) | NA | |
column · INTEGER (1..11111) · not-accessible · current The egress queue id for scheduler. tnQosExtPortSchedulerWeightQid is a number in the range (0..(dot1dPortNumTrafficClasses-1)) | ||||
| CtnQosExtPortSchedulerWeightVal | 1.3.6.1.4.1.868.2.5.9.1.1.4.1.2 | INTEGER (1..100) | RW | |
column · INTEGER (1..100) · read-write · current The egress queue weight value. the value range is from 1 to 100. | ||||
| CtnQosExtPortSchedulerWeightPercent | 1.3.6.1.4.1.868.2.5.9.1.1.4.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The egress queue weight in percent view. | ||||
| TtnQosExtPortShaperTable | 1.3.6.1.4.1.868.2.5.9.1.1.5 | NA | ||
table · not-accessible · current A port shaper table can limit the bandwidth of egress frames per port. | ||||
| RtnQosExtPortShaperEntry | 1.3.6.1.4.1.868.2.5.9.1.1.5.1 | NA | ||
row · not-accessible · current An entry in the table controls the bandwidth of egress frames per port.
| ||||
| CtnQosExtPortShaperStatus | 1.3.6.1.4.1.868.2.5.9.1.1.5.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Controls the per port shaper status. The shaper can limit the bandwidth of transmit frames in egress side.
| ||||
| CtnQosExtPortShaperRate | 1.3.6.1.4.1.868.2.5.9.1.1.5.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Controls the rate for the port shaper. The rate unit is defined in tnQosExtPortShaperUnit. | ||||
| CtnQosExtPortShaperUnit | 1.3.6.1.4.1.868.2.5.9.1.1.5.1.3 | TnQosExtRateUnitType | RW | |
column · TnQosExtRateUnitType · read-write · current the rate unit for the port shaper. Depend on the implement, some unit type may not be supported. | ||||
| TtnQosExtPortQueueShaperTable | 1.3.6.1.4.1.868.2.5.9.1.1.6 | NA | ||
table · not-accessible · current A port queue shaper table can limit the bandwidth of egress frames per port per queue. | ||||
| RtnQosExtPortQueueShaperEntry | 1.3.6.1.4.1.868.2.5.9.1.1.6.1 | NA | ||
row · not-accessible · current An entry in the table controls the bandwidth of egress frames per port per queue. | ||||
| CtnQosExtPortQueueShaperQid | 1.3.6.1.4.1.868.2.5.9.1.1.6.1.1 | INTEGER (1..11111) | NA | |
column · INTEGER (1..11111) · not-accessible · current The egress queue id for queue shaper. tnQosExtPortQueueShaperQid is a number in the range (0..(dot1dPortNumTrafficClasses-1)) | ||||
| CtnQosExtPortQueueShaperStatus | 1.3.6.1.4.1.868.2.5.9.1.1.6.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Controls whether the shaper is enabled on the specific queue.
| ||||
| CtnQosExtPortQueueShaperRate | 1.3.6.1.4.1.868.2.5.9.1.1.6.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Controls the rate for the queue shaper. The rate unit is defined in tnQosExtPortQueueShaperUnit. | ||||
| CtnQosExtPortQueueShaperUnit | 1.3.6.1.4.1.868.2.5.9.1.1.6.1.4 | TnQosExtRateUnitType | RW | |
column · TnQosExtRateUnitType · read-write · current The rate unit for the queue shaper. Depend on the implement, some unit type may not be supported. | ||||
| CtnQosExtPortQueueShaperExcess | 1.3.6.1.4.1.868.2.5.9.1.1.6.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Controls whether the queue is allowed to use excess bandwidth.
| ||||
| TtnQosExtPortStormControlTable | 1.3.6.1.4.1.868.2.5.9.1.1.7 | NA | ||
table · not-accessible · current Storm control settings table. | ||||
| RtnQosExtPortStormControlEntry | 1.3.6.1.4.1.868.2.5.9.1.1.7.1 | NA | ||
row · not-accessible · current An entry in the table represents the storm control settings on an interface.
| ||||
| CtnQosExtPortStormControlUnicastStatus | 1.3.6.1.4.1.868.2.5.9.1.1.7.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable the storm control status for unicast.
| ||||
| CtnQosExtPortStormControlUnicastRate | 1.3.6.1.4.1.868.2.5.9.1.1.7.1.2 | TnQosExtRateInFps | RW | |
column · TnQosExtRateInFps · read-write · current The rate unit is packets per second (pps). | ||||
| CtnQosExtPortStormControlMulticastStatus | 1.3.6.1.4.1.868.2.5.9.1.1.7.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable the storm control status for multicast.
| ||||
| CtnQosExtPortStormControlMulticastRate | 1.3.6.1.4.1.868.2.5.9.1.1.7.1.4 | TnQosExtRateInFps | RW | |
column · TnQosExtRateInFps · read-write · current The rate unit is packets per second (pps). | ||||
| CtnQosExtPortStormControlBroadcastStatus | 1.3.6.1.4.1.868.2.5.9.1.1.7.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Enable or disable the storm control status for broadcast.
| ||||
| CtnQosExtPortStormControlBroadcastRate | 1.3.6.1.4.1.868.2.5.9.1.1.7.1.6 | TnQosExtRateInFps | RW | |
column · TnQosExtRateInFps · read-write · current The rate unit is packets per second (pps). | ||||
| TtnQosExtPortStormControl2Table | 1.3.6.1.4.1.868.2.5.9.1.1.8 | NA | ||
table · not-accessible · current Storm control settings table 2. | ||||
| RtnQosExtPortStormControl2Entry | 1.3.6.1.4.1.868.2.5.9.1.1.8.1 | NA | ||
row · not-accessible · current An entry in the table represents the storm control settings on an interface. | ||||
| CtnQosExtPortStormControl2FrameType | 1.3.6.1.4.1.868.2.5.9.1.1.8.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current The frame type that storm control takes effect. Implement may use values like: unicast - unicast frame broadcast - broadcast frame unknown - unknown(flooding) frame
| ||||
| CtnQosExtPortStormControl2Rate | 1.3.6.1.4.1.868.2.5.9.1.1.8.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Controls the rate for the storm control. The rate unit is defined in tnQosExtPortStormControl2RateUnit | ||||
| CtnQosExtPortStormControl2RateUnit | 1.3.6.1.4.1.868.2.5.9.1.1.8.1.3 | TnQosExtRateUnitType | RW | |
column · TnQosExtRateUnitType · read-write · current Controls the rate unit for the storm control. The rate is defined in tnQosExtPortStormControl2Rate | ||||
| CtnQosExtPortStormControl2Status | 1.3.6.1.4.1.868.2.5.9.1.1.8.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current Enable or disable the storm control status for the certain frame type. | ||||
| TtnQosExtPortWredTable | 1.3.6.1.4.1.868.2.5.9.1.1.9 | NA | ||
table · not-accessible · current A table used to configure the Weighted Random Early Detection feature. | ||||
| RtnQosExtPortWredEntry | 1.3.6.1.4.1.868.2.5.9.1.1.9.1 | NA | ||
row · not-accessible · current An entry in the table used to configure the Weighted Random Early Detection feature.
| ||||
| CtnQosExtPortWredQid | 1.3.6.1.4.1.868.2.5.9.1.1.9.1.1 | INTEGER (1..11111) | NA | |
column · INTEGER (1..11111) · not-accessible · current The queue id for the weighted random early detection. | ||||
| CtnQosExtPortWredEnable | 1.3.6.1.4.1.868.2.5.9.1.1.9.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current Enable or disable the weighted random early detection for a certain traffic queue. | ||||
| CtnQosExtPortWredThresholdMin | 1.3.6.1.4.1.868.2.5.9.1.1.9.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Controls the lower RED threshold for a certain traffic queue. If the average queue filling level is below this threshold, the drop probability is zero. This value is restricted to 0-100. | ||||
| CtnQosExtPortWredMaxDp1 | 1.3.6.1.4.1.868.2.5.9.1.1.9.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Controls the drop probability for frames marked with Drop Precedence Level 1 when the average queue filling level is 100%. This value is restricted to 0-100. | ||||
| CtnQosExtPortWredMaxDp2 | 1.3.6.1.4.1.868.2.5.9.1.1.9.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Controls the drop probability for frames marked with Drop Precedence Level 2 when the average queue filling level is 100%. This value is restricted to 0-100. | ||||
| CtnQosExtPortWredMaxDp3 | 1.3.6.1.4.1.868.2.5.9.1.1.9.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Controls the drop probability for frames marked with Drop Precedence Level 3 when the average queue filling level is 100%. This value is restricted to 0-100. | ||||
| CtnQosExtPortWredMaxThresh | 1.3.6.1.4.1.868.2.5.9.1.1.9.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Controls the upper RED drop probability or fill level threshold for frames marked with Drop Precedence Level 1 (yellow frames). This value is restricted to 1-100%. | ||||
| CtnQosExtPortWredMaxUnit | 1.3.6.1.4.1.868.2.5.9.1.1.9.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Selects the unit for Max. Threshold. Possible values are: Drop Probability: Max. Threshold controls the drop probability just below 100% fill level. Fill Level: Max. Threshold controls the fill level where drop probability reaches 100%.
| ||||
| TtnQosExtPortPolicerOrderTable | 1.3.6.1.4.1.868.2.5.9.1.1.10 | NA | ||
table · not-accessible · current A table used to configure the QoS Policer Order per port. | ||||
| RtnQosExtPortPolicerOrderEntry | 1.3.6.1.4.1.868.2.5.9.1.1.10.1 | NA | ||
row · not-accessible · current An entry in the table used to configure the QoS Policer Order per port.
| ||||
| CtnQosExtPortPolicerOrder | 1.3.6.1.4.1.868.2.5.9.1.1.10.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current QoS policer order on the entry. depend on implement, the valid policer order would be: 1 - in this mode, QoS policer order is Port Queue Policer first, then Port Policer, ACL Policer is the last (default). 2 - in this mode, QoS policer order is ACL Policer first, then Port Queue Policer, Port Policer is the last. | ||||
| NtnQosExtL2CosMgmt | 1.3.6.1.4.1.868.2.5.9.1.2 | |||
| TtnQosExtL2CosIfClassifDefaultTable | 1.3.6.1.4.1.868.2.5.9.1.2.1 | NA | ||
table · not-accessible · current Qos layer 2 default Ingress Classification table. | ||||
| RtnQosExtL2CosIfClassifDefaultEntry | 1.3.6.1.4.1.868.2.5.9.1.2.1.1 | NA | ||
row · not-accessible · current An entry in the table represents the QoS layer 2 default Ingress Classification settings on an interface.
| ||||
| CtnQosExtL2CosIfClassifDefaultClass | 1.3.6.1.4.1.868.2.5.9.1.2.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Controls the default QoS class (the QoS class for frames not classified in any other way). There is a one to one mapping between QoS class, queue and priority. A QoS class of 0 (zero) has the lowest priority. tnQosExtL2CosIfClassifDefaultClass is a number in the range (0..(dot1dPortNumTrafficClasses-1)) | ||||
| CtnQosExtL2CosIfClassifDefaultDpl | 1.3.6.1.4.1.868.2.5.9.1.2.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Controls the default DP (Drop Precedence) level for frames not classified in any other way. | ||||
| CtnQosExtL2CosIfClassifDefaultPcp | 1.3.6.1.4.1.868.2.5.9.1.2.1.1.3 | INTEGER (0..7) | RW | |
column · INTEGER (0..7) · read-write · current Controls the default PCP for untagged frames. PCP (Priority Code Point) is a 3-bit field storing the priority level for the 802.1Q frame. It is also known as User Priority. | ||||
| CtnQosExtL2CosIfClassifDefaultDei | 1.3.6.1.4.1.868.2.5.9.1.2.1.1.4 | INTEGER (0..1) | RW | |
column · INTEGER (0..1) · read-write · current Controls the default DEI for untagged frames. DEI (Drop Eligible Indicator) is a 1-bit field in the VLAN tag. | ||||
| TtnQosExtL2CosIfClassifTagTable | 1.3.6.1.4.1.868.2.5.9.1.2.2 | NA | ||
table · not-accessible · current Layer 2 Cos ingress priority-tagged frame classification mode Table. | ||||
| RtnQosExtL2CosIfClassifTagEntry | 1.3.6.1.4.1.868.2.5.9.1.2.2.1 | NA | ||
row · not-accessible · current An entry in the table represents the Layer 2 Cos ingress priority-tagged frame classification mode on an interface.
| ||||
| CtnQosExtL2CosIfClassifTagMode | 1.3.6.1.4.1.868.2.5.9.1.2.2.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Controls the classification mode for priority tagged frames on this interface. Disabled - Use default QoS class and DP level for priority tagged frames. Enabled - Use mapped value of PCP and DEI for priority tagged frames.
| ||||
| TtnQosExtL2CosIfClassifTagMapTable | 1.3.6.1.4.1.868.2.5.9.1.2.3 | NA | ||
table · not-accessible · current classified (PCP, DEI) to (QoS class, DP level) mapping table. | ||||
| RtnQosExtL2CosIfClassifTagMapEntry | 1.3.6.1.4.1.868.2.5.9.1.2.3.1 | NA | ||
row · not-accessible · current An entry in the table represents the mapping of the classified (PCP, DEI) to (QoS class, DP level) values. This mapping is valid when tnQosExtL2CosIfClassifTagMode is set to Enabled. | ||||
| CtnQosExtL2CosIfClassifTagMapPcp | 1.3.6.1.4.1.868.2.5.9.1.2.3.1.1 | INTEGER (0..7) | NA | |
column · INTEGER (0..7) · not-accessible · current The carried Pcp (Priority Code Point) field value if recieved frame is IEEE tagged frame. | ||||
| CtnQosExtL2CosIfClassifTagMapDei | 1.3.6.1.4.1.868.2.5.9.1.2.3.1.2 | INTEGER (0..1) | NA | |
column · INTEGER (0..1) · not-accessible · current The carried Dei (Drop Eligible Indicator) field value if recieved frame is IEEE tagged frame. | ||||
| CtnQosExtL2CosIfClassifTagMapClass | 1.3.6.1.4.1.868.2.5.9.1.2.3.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The Traffic Class the received frame is mapped to. tnQosExtL2CosIfClassifTagMapClass is a number in the range (0..(dot1dPortNumTrafficClasses-1)). | ||||
| CtnQosExtL2CosIfClassifTagMapDpl | 1.3.6.1.4.1.868.2.5.9.1.2.3.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The DP (Drop Precedence) level the received frame is mapped to. | ||||
| TtnQosExtL2CosIfTagRemarkingModeTable | 1.3.6.1.4.1.868.2.5.9.1.2.4 | NA | ||
table · not-accessible · current A table can control the egress frame tag remarking mode on an interface. | ||||
| RtnQosExtL2CosIfTagRemarkingModeEntry | 1.3.6.1.4.1.868.2.5.9.1.2.4.1 | NA | ||
row · not-accessible · current An entry in the table controls the egress frame tag remarking mode on an interface.
| ||||
| CtnQosExtL2CosIfTagRemarkingMode | 1.3.6.1.4.1.868.2.5.9.1.2.4.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Controls the tag remarking mode for this port. Classified - Use classified PCP/DEI values. Default - Use default PCP/DEI values. Mapped - Use mapped versions of QoS class and DP level.
| ||||
| TtnQosExtL2CosIfTagRemarkingDefaultTable | 1.3.6.1.4.1.868.2.5.9.1.2.5 | NA | ||
table · not-accessible · current A table represents the egress frame tag remarking mapping per port, when tnQosExtL2CosIfTagRemarkingMode is set to default mode. | ||||
| RtnQosExtL2CosIfTagRemarkingDefaultEntry | 1.3.6.1.4.1.868.2.5.9.1.2.5.1 | NA | ||
row · not-accessible · current An entry in the table represents the egress frame tag remarking mapping per port, when tnQosExtL2CosIfTagRemarkingMode is set to default mode.
| ||||
| CtnQosExtL2CosIfTagRemarkingDefaultPcp | 1.3.6.1.4.1.868.2.5.9.1.2.5.1.1 | INTEGER (0..7) | RW | |
column · INTEGER (0..7) · read-write · current Default PCP (Priority Code Point) is a 3-bit field storing the priority level for the 802.1Q frame. It is also known as User Priority. The valid range is 0 - 7. The default is 0. | ||||
| CtnQosExtL2CosIfTagRemarkingDefaultDei | 1.3.6.1.4.1.868.2.5.9.1.2.5.1.2 | INTEGER (0..1) | RW | |
column · INTEGER (0..1) · read-write · current Default DEI (Drop Eligible Indicator) is a 1-bit field in the VLAN tag. The valid range is 0 - 1. The default is 0. | ||||
| TtnQosExtL2CosIfTagRemarkingMappingTable | 1.3.6.1.4.1.868.2.5.9.1.2.6 | NA | ||
table · not-accessible · current A table represents the egress frame tag remarking mapping per port, when tnQosExtL2CosIfTagRemarkingMode is set to mapping mode. | ||||
| RtnQosExtL2CosIfTagRemarkingMappingEntry | 1.3.6.1.4.1.868.2.5.9.1.2.6.1 | NA | ||
row · not-accessible · current An entry in the table represents the egress frame tag remarking mapping per port, when tnQosExtL2CosIfTagRemarkingMode is set to mapping mode. | ||||
| CtnQosExtL2CosIfTagRemarkingClass | 1.3.6.1.4.1.868.2.5.9.1.2.6.1.1 | INTEGER (1..11111) | NA | |
column · INTEGER (1..11111) · not-accessible · current The traffic class of the transmit frame belongs to. tnQosExtIfTagRemarkingClass is a number in the range (0..(dot1dPortNumTrafficClasses-1)). | ||||
| CtnQosExtL2CosIfTagRemarkingDpl | 1.3.6.1.4.1.868.2.5.9.1.2.6.1.2 | INTEGER (1..11111) | NA | |
column · INTEGER (1..11111) · not-accessible · current The DP (Drop Precedence) level of the transmit frame belongs to. | ||||
| CtnQosExtL2CosIfTagRemarkingPcp | 1.3.6.1.4.1.868.2.5.9.1.2.6.1.3 | INTEGER (0..7) | RW | |
column · INTEGER (0..7) · read-write · current PCP (Priority Code Point) is a 3-bit field storing the priority level for the 802.1Q frame. It is also known as User Priority. The valid range is 0 - 7. | ||||
| CtnQosExtL2CosIfTagRemarkingDei | 1.3.6.1.4.1.868.2.5.9.1.2.6.1.4 | INTEGER (0..1) | RW | |
column · INTEGER (0..1) · read-write · current DEI (Drop Eligible Indicator) is a 1-bit field in the VLAN tag. The valid range is 0 - 1. | ||||
| TtnQosExtL2CosIfTagRemarkingDplMappingTable | 1.3.6.1.4.1.868.2.5.9.1.2.7 | NA | ||
table · not-accessible · current A table represents the egress frame tag remarking DP level mapping per port, when tnQosExtL2CosIfTagRemarkingMode is set to mapping mode. | ||||
| RtnQosExtL2CosIfTagRemarkingDplMappingEntry | 1.3.6.1.4.1.868.2.5.9.1.2.7.1 | NA | ||
row · not-accessible · current An entry in the table represents the egress frame tag remarking dpl mapping per port, when tnQosExtL2CosIfTagRemarkingMode is set to mapping mode. | ||||
| CtnQosExtL2CosIfTagRemarkingDplMappingClassifDpl | 1.3.6.1.4.1.868.2.5.9.1.2.7.1.1 | INTEGER (1..11111) | NA | |
column · INTEGER (1..11111) · not-accessible · current The Classified DP (Drop Precedence) level of the transmit frame belongs to. | ||||
| CtnQosExtL2CosIfTagRemarkingDplMappingDpl | 1.3.6.1.4.1.868.2.5.9.1.2.7.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The DP (Drop Precedence) level used for tag remarking process. | ||||
| NtnQosExtDscpMgmt | 1.3.6.1.4.1.868.2.5.9.1.3 | |||
| TtnQosExtDscpIfClassifBaseTable | 1.3.6.1.4.1.868.2.5.9.1.3.1 | NA | ||
table · not-accessible · current A table represents the QoS classification mode basis on an interface. | ||||
| RtnQosExtDscpIfClassifBaseEntry | 1.3.6.1.4.1.868.2.5.9.1.3.1.1 | NA | ||
row · not-accessible · current An entry in the table represents the QoS classification mode basis on an interface.
| ||||
| CtnQosExtDscpIfClassifBaseDscp | 1.3.6.1.4.1.868.2.5.9.1.3.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Controls whether the QoS classification mode is based on DSCP value in IP frames on an interface. Disabled - Disable DSCP based classification. Enabled - Enable DSCP based classification.
| ||||
| TtnQosExtDscpIfTransTable | 1.3.6.1.4.1.868.2.5.9.1.3.2 | NA | ||
table · not-accessible · current A table represents the DSCP ingress translation mode on an interface. | ||||
| RtnQosExtDscpIfTransEntry | 1.3.6.1.4.1.868.2.5.9.1.3.2.1 | NA | ||
row · not-accessible · current An entry in the table represents the DSCP ingress translation mode on an interface.
| ||||
| CtnQosExtDscpIfTransMode | 1.3.6.1.4.1.868.2.5.9.1.3.2.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Controls the ingress DSCP translation setting on an interface.
| ||||
| TtnQosExtDscpIfTransMapTable | 1.3.6.1.4.1.868.2.5.9.1.3.3 | NA | ||
table · not-accessible · current A table perform the ingress DSCP translation on an interface. | ||||
| RtnQosExtDscpIfTransMapEntry | 1.3.6.1.4.1.868.2.5.9.1.3.3.1 | NA | ||
row · not-accessible · current A entry in this table perform the ingress DSCP translation on an interface. | ||||
| CtnQosExtDscpIfTransMapDscp | 1.3.6.1.4.1.868.2.5.9.1.3.3.1.1 | INTEGER (0..63) | NA | |
column · INTEGER (0..63) · not-accessible · current The received frame carried DSCP value, used for DSCP transmit input. DSCP (Differentiated Services Code Point) is a field in the header of IP packets for packet classification purposes. The valid range is 0 - 63 | ||||
| CtnQosExtDscpIfTransMapToDscp | 1.3.6.1.4.1.868.2.5.9.1.3.3.1.2 | INTEGER (0..63) | RW | |
column · INTEGER (0..63) · read-write · current The mapping DSCP value from the frame DSCP value, used for DSCP classification. DSCP (Differentiated Services Code Point) is a field in the header of IP packets for packet classification purposes. The valid range is 0 - 63 | ||||
| TtnQosExtDscpClassifMapTable | 1.3.6.1.4.1.868.2.5.9.1.3.4 | NA | ||
table · not-accessible · current A table represents the DSCP-Based QoS ingress classification mapping on an interface. | ||||
| RtnQosExtDscpClassifMapEntry | 1.3.6.1.4.1.868.2.5.9.1.3.4.1 | NA | ||
row · not-accessible · current An entry in the table represents the DSCP-Based QoS ingress classification mapping on an interface. | ||||
| CtnQosExtDscpClassifMapDscp | 1.3.6.1.4.1.868.2.5.9.1.3.4.1.1 | INTEGER (0..63) | NA | |
column · INTEGER (0..63) · not-accessible · current DSCP value used to map Qos class and DPL is either translated DSCP value or incoming frame DSCP value. | ||||
| CtnQosExtDscpClassifMapTrust | 1.3.6.1.4.1.868.2.5.9.1.3.4.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Controls whether a specific DSCP value is trusted. Only frames with trused DSCP values are mapped to a specific QoS class and DPL. Frames with untrusted DSCP values are treated as a non-IP frame. Enabled - Set DSCP as trusted DSCP. Disabled - Set DSCP as un-trusted DSCP.
| ||||
| CtnQosExtDscpClassifMapClass | 1.3.6.1.4.1.868.2.5.9.1.3.4.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The traffic class of the recieved frame mapped to. tnQosExtDscpClassifMapClass is a number in the range (0..(dot1dPortNumTrafficClasses-1)). | ||||
| CtnQosExtDscpClassifMapDpl | 1.3.6.1.4.1.868.2.5.9.1.3.4.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The DP (Drop Precedence) level of the transmit frame mapped to | ||||
| TtnQosExtDscpIfClassifExtTable | 1.3.6.1.4.1.868.2.5.9.1.3.5 | NA | ||
table · not-accessible · current A table represents the DSCP classification based on QoS class and DP level on an interface. | ||||
| RtnQosExtDscpIfClassifExtEntry | 1.3.6.1.4.1.868.2.5.9.1.3.5.1 | NA | ||
row · not-accessible · current An entry in the table represents the DSCP classification based on QoS class and DP level on an interface.
| ||||
| CtnQosExtDscpIfClassifExtMode | 1.3.6.1.4.1.868.2.5.9.1.3.5.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Controls the ingress DSCP classification setting on an interface. Disable - No Ingress DSCP Classification. DSCP=0 - Classify if incoming (or translated if enabled) DSCP is 0. Selected: Classify only selected DSCP for which classification is enabled. All: Classify all DSCP.
| ||||
| TtnQosExtDscpIfClassifExtDscpTable | 1.3.6.1.4.1.868.2.5.9.1.3.6 | NA | ||
table · not-accessible · current A table represents the DSCP classification mode per DSCP value. | ||||
| RtnQosExtDscpIfClassifExtDscpEntry | 1.3.6.1.4.1.868.2.5.9.1.3.6.1 | NA | ||
row · not-accessible · current An entry in the table represents the DSCP classification mode per DSCP value. | ||||
| CtnQosExtDscpIfClassifExtDscp | 1.3.6.1.4.1.868.2.5.9.1.3.6.1.1 | INTEGER (0..63) | NA | |
column · INTEGER (0..63) · not-accessible · current DSCP (Differentiated Services Code Point) is a field in the header of IP packets for packet classification purposes. The valid range is 0 - 63 | ||||
| CtnQosExtDscpIfClassifExtDscpMode | 1.3.6.1.4.1.868.2.5.9.1.3.6.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Control the DSCP ingress classification mode on an interface. If port DSCP classification is 'selected', DSCP will be classified based on QoS class and DP level only for DSCP value with classification mode 'enabled'. DSCP may be translated DSCP if translation is enabled for the port. Enabled - Enable DSCP ingress classification. Disabled - Disable DSCP ingress classification.
| ||||
| TtnQosExtDscpIfClassifExtMapTable | 1.3.6.1.4.1.868.2.5.9.1.3.7 | NA | ||
table · not-accessible · current A table config the Dscp ingress classification mapping. | ||||
| RtnQosExtDscpIfClassifExtMapEntry | 1.3.6.1.4.1.868.2.5.9.1.3.7.1 | NA | ||
row · not-accessible · current An entry in this table perform the Dscp ingress classification mapping. | ||||
| CtnQosExtDscpIfClassifExtMapClass | 1.3.6.1.4.1.868.2.5.9.1.3.7.1.1 | INTEGER (1..11111) | NA | |
column · INTEGER (1..11111) · not-accessible · current The Traffic Class the received frame is mapped to. tnQosExtDscpIfClassifExtMapClass is a number in the range (0..(dot1dPortNumTrafficClasses-1)). | ||||
| CtnQosExtDscpIfClassifExtMapDpl | 1.3.6.1.4.1.868.2.5.9.1.3.7.1.2 | INTEGER (1..11111) | NA | |
column · INTEGER (1..11111) · not-accessible · current The DP (Drop Precedence) level the received frame is mapped to. | ||||
| CtnQosExtDscpIfClassifExtMapDscp | 1.3.6.1.4.1.868.2.5.9.1.3.7.1.3 | INTEGER (0..63) | RW | |
column · INTEGER (0..63) · read-write · current The Classified DSCP from QoS class and DP level. The DSCP which needs to be classified depends on interface DSCP classification and DSCP classification mode. Incoming frame DSCP may be translated before using the value for classification. | ||||
| TtnQosExtDscpIfEgressRemarkTable | 1.3.6.1.4.1.868.2.5.9.1.3.8 | NA | ||
table · not-accessible · current A table represents the DSCP egress remark mode on an interface. | ||||
| RtnQosExtDscpIfEgressRemarkEntry | 1.3.6.1.4.1.868.2.5.9.1.3.8.1 | NA | ||
row · not-accessible · current An entry in the table represents the DSCP egress remark mode on an interface.
| ||||
| CtnQosExtDscpIfEgressRemarkMode | 1.3.6.1.4.1.868.2.5.9.1.3.8.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Controls the egress frame DSCP field rewrite setting per port. Disable: No Egress rewrite. Enable: Rewrite enable without remapped. Remap DP Unaware: DSCP from analyzer is remapped and frame is remarked with remapped DSCP value. Remap DP Aware: DSCP from analyzer is remapped and frame is remarked with remapped DSCP value.
| ||||
| TtnQosExtDscpIfEgressRemarkMapTable | 1.3.6.1.4.1.868.2.5.9.1.3.9 | NA | ||
table · not-accessible · current A table represents the DSCP egress remark map on an interface. | ||||
| RtnQosExtDscpIfEgressRemarkMapEntry | 1.3.6.1.4.1.868.2.5.9.1.3.9.1 | NA | ||
row · not-accessible · current An entry in the table represents the DSCP egress remark map on an interface. | ||||
| CtnQosExtDscpIfEgressRemarkMapDscp | 1.3.6.1.4.1.868.2.5.9.1.3.9.1.1 | INTEGER (0..63) | NA | |
column · INTEGER (0..63) · not-accessible · current The classified DSCP value of the specific IP frame, used for DSCP egress remark. DSCP valid range is 0 - 63 | ||||
| CtnQosExtDscpIfEgressRemarkMapDpl | 1.3.6.1.4.1.868.2.5.9.1.3.9.1.2 | INTEGER (1..11111) | NA | |
column · INTEGER (1..11111) · not-accessible · current The classified DP (Drop Precedence) level of the specific frame, used for DSCP egress remark. | ||||
| CtnQosExtDscpIfEgressRemarkMapToDscp | 1.3.6.1.4.1.868.2.5.9.1.3.9.1.3 | INTEGER (0..63) | RW | |
column · INTEGER (0..63) · read-write · current The DSCP value to which you want to remap for the egress side. This remap is based on classified DSCP and DP level. | ||||
| NtnQosExtQclMgmt | 1.3.6.1.4.1.868.2.5.9.1.4 | |||
| TtnQosExtQclTable | 1.3.6.1.4.1.868.2.5.9.1.4.1 | NA | ||
table · not-accessible · current A table used to configure the QoS Control List settings. | ||||
| RtnQosExtQclEntry | 1.3.6.1.4.1.868.2.5.9.1.4.1.1 | NA | ||
row · not-accessible · current An entry in the table used to configure the QoS Control List settings.
| ||||
| CtnQosExtQclIndex | 1.3.6.1.4.1.868.2.5.9.1.4.1.1.1 | INTEGER (1..11111) | NA | |
column · INTEGER (1..11111) · not-accessible · current The row index of the QCL. | ||||
| CtnQosExtQclId | 1.3.6.1.4.1.868.2.5.9.1.4.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The identifier of the QCL. | ||||
| CtnQosExtQclNextQclId | 1.3.6.1.4.1.868.2.5.9.1.4.1.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Specify the created ECE is placed before which QCL. | ||||
| CtnQosExtQclPortList | 1.3.6.1.4.1.868.2.5.9.1.4.1.1.4 | PortList | RC | |
column · PortList · read-create · current The list of port members for the QCL. | ||||
| CtnQosExtQclTagType | 1.3.6.1.4.1.868.2.5.9.1.4.1.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current The frame tag type for matching the QCL. The possible values are: tagged: The QCL will match tagged frames only. untagged: The QCL will match untagged frames only. any: The QCL will match both tagged and untagged frames.
| ||||
| CtnQosExtQclTagVlanType | 1.3.6.1.4.1.868.2.5.9.1.4.1.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current The VLAN ID filter type for matching the QCL. It is only significant if tnQosExtQclTagType
is 'tagged' or 'any'. The possible values are:
any: No VLAN ID filter is specified. (VLAN ID filter status is 'don't-care'.)
specific: If you want to filter a specific VLAN ID value with this QCL, choose this
value. A field for entering a specific value appears.
range: If you want to filter a specific VLAN ID range filter with this QCL, choose
this value. A field for entering a range appears.
| ||||
| CtnQosExtQclTagVlanVal | 1.3.6.1.4.1.868.2.5.9.1.4.1.1.7 | VlanIndex | RC | |
column · VlanIndex · read-create · current The Specific VLAN ID filter for matching the QCL. It is only significant if tnQosExtQclTagVlanType is selected 'specific'. | ||||
| CtnQosExtQclTagVlanMin | 1.3.6.1.4.1.868.2.5.9.1.4.1.1.8 | VlanIndex | RC | |
column · VlanIndex · read-create · current The Start of Range VLAN ID filter for matching the QCL. It is only significant if tnQosExtQclTagVlanType is selected 'range'. this value should be lower than tnQosExtQclTagVlanMax value. | ||||
| CtnQosExtQclTagVlanMax | 1.3.6.1.4.1.868.2.5.9.1.4.1.1.9 | VlanIndex | RC | |
column · VlanIndex · read-create · current The End of Range VLAN ID filter for matching the QCL. It is only significant if tnQosExtQclTagVlanType is selected 'range'. this value should be higher than tnQosExtQclTagVlanMin value. | ||||
| CtnQosExtQclTagPcp | 1.3.6.1.4.1.868.2.5.9.1.4.1.1.10 | Bits | RC | |
column · Bits · read-create · current The PCP value for mataching the QCL. It is only significant if tnQosExtQclTagType
is 'tagged' or 'any'. The possible values are:
any: The QCL will match any PCP value(all bits will be set to 1).
specific: each bit matchs a specific PCP of QCL(from bit0 to bit7).
range: The QCL will match PCP values in the selected range, valid range is depend on the specific implement.
e.g: for S3280, the valid range are bit0-bit1, bit2-bit3, bit4-bit5, bit6-bit7, bit0-bit3 or bit4-bit7.
| ||||
| CtnQosExtQclTagDei | 1.3.6.1.4.1.868.2.5.9.1.4.1.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current The DEI value for mataching the QCL. It is only significant if tnQosExtQclTagType is 'tagged' or 'any'. The possible values are: 'any', 'dei0' or 'dei1'.
| ||||
| CtnQosExtQclSMacType | 1.3.6.1.4.1.868.2.5.9.1.4.1.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current The source MAC address filter type for matching the QCL. The possible values are: any: No source MAC address filter is specified. (source MAC address filter status is 'don't-care'.) specific: choose this value to filter a specific source MAC address value with this QCL.
| ||||
| CtnQosExtQclSMac | 1.3.6.1.4.1.868.2.5.9.1.4.1.1.13 | MacAddress | RC | |
column · MacAddress · read-create · current The source MAC address filter for matching the QCL. In S3280 implement, only MAC OUI(first three octets) are used for MAC address matching process. | ||||
| CtnQosExtQclDMacType | 1.3.6.1.4.1.868.2.5.9.1.4.1.1.14 | INTEGER | RC | |
column · INTEGER · read-create · current The destination MAC address filter for matching the QCL. The possible values are: any: No destination MAC address filter is specified. (destination MAC address filter status is 'don't-care'.) unicast: Match the unicast destination MAC address for the QCL. multicast: Match the multicast destination MAC address for the QCL. broadcast: Match the broadcast destination MAC address for the QCL.
| ||||
| CtnQosExtQclFrameType | 1.3.6.1.4.1.868.2.5.9.1.4.1.1.15 | INTEGER | RC | |
column · INTEGER · read-create · current The frame type for the QCL. The possible values are: any: The QCL will match any frame type. ethernet: The QCL will match Ethernet frame type. llc: The QCL will match LLC frame type. snap: The QCL will match SNAP frame type. ipv4: The QCL will match IPv4 frames. ipv6: The QCL will match IPv6 frames.
| ||||
| CtnQosExtQclActClassDefault | 1.3.6.1.4.1.868.2.5.9.1.4.1.1.16 | INTEGER | RC | |
column · INTEGER · read-create · current Determe the type of matched frame traffic class modification. default: QCL do not change the traffic class of the matched received frames. specific: QCL will change the traffic class to the specific value of the matched received frames.
| ||||
| CtnQosExtQclActClass | 1.3.6.1.4.1.868.2.5.9.1.4.1.1.17 | INTEGER | RC | |
column · INTEGER · read-create · current If a frame matches the QCE it will be put in the queue. It is only significant if tnQosExtQclActClassDefault is selected 'specific' value. tnQosExtQclActClass is a number in the range (0..(dot1dPortNumTrafficClasses-1)). | ||||
| CtnQosExtQclActDplDefault | 1.3.6.1.4.1.868.2.5.9.1.4.1.1.18 | INTEGER | RC | |
column · INTEGER · read-create · current Determe the type of matched frame traffic DP (Drop Precedence) level modification. default: QCL do not change the DP (Drop Precedence) level of the matched received frames. specific: QCL will change the DP (Drop Precedence) level to the specific value of the matched received frames.
| ||||
| CtnQosExtQclActDpl | 1.3.6.1.4.1.868.2.5.9.1.4.1.1.19 | INTEGER | RC | |
column · INTEGER · read-create · current If a frame matches the QCE then DP level will set to the value. It is only significant if tnQosExtQclActDplDefault is selected 'specific' value. | ||||
| CtnQosExtQclActDscpDefault | 1.3.6.1.4.1.868.2.5.9.1.4.1.1.20 | INTEGER | RC | |
column · INTEGER · read-create · current Determe the type of matched frame DSCP modification. default: QCL do not change the DSCP of the matched received frames. specific: QCL will change the DSCP to the specific value of the matched received frames.
| ||||
| CtnQosExtQclActDscp | 1.3.6.1.4.1.868.2.5.9.1.4.1.1.21 | INTEGER (0..63) | RC | |
column · INTEGER (0..63) · read-create · current If a frame matches the QCE then DSCP will be classified with the value. It is only significant if tnQosExtQclActDscpDefault is selected 'specific' value. | ||||
| CtnQosExtQclConflict | 1.3.6.1.4.1.868.2.5.9.1.4.1.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current QCE status. It may be that resources required to add a QCE may not be available; in that case it shows conflict status as 'yes', otherwise it is always 'no'.
| ||||
| CtnQosExtQclStatus | 1.3.6.1.4.1.868.2.5.9.1.4.1.1.23 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this conceptual row entry of QCL table. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
For a detailed description of this object, please refer to
SNMPv2-TC MIB. | ||||
| TtnQosExtQclL2Table | 1.3.6.1.4.1.868.2.5.9.1.4.2 | NA | ||
table · not-accessible · current A table used to configure the QoS Control List layer 2 frame settings. | ||||
| RtnQosExtQclL2Entry | 1.3.6.1.4.1.868.2.5.9.1.4.2.1 | NA | ||
row · not-accessible · current An entry in the table used to configure the QoS Control List layer 2 fram settings.
| ||||
| CtnQosExtQclEtherType | 1.3.6.1.4.1.868.2.5.9.1.4.2.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The Ether type filter for matching the QCL. It is only significant if tnQosExtQclFrameType 'ethernet' is selected. The possible values are: any: No Ether type filter is specified. (Ether type filter status is 'don't-care'.) specific: Choose this value to filter a specific Ether type value with this QCL.
| ||||
| CtnQosExtQclEtherVal | 1.3.6.1.4.1.868.2.5.9.1.4.2.1.2 | INTEGER (1536..65535) | RW | |
column · INTEGER (1536..65535) · read-write · current When tnQosExtQclEtherType is selected 'Specific' value, you can enter a specific value. The allowed value is from 0x0600 through 0xFFFF. If implement supports ipv4 or ipv6 selection in tnQosExtQclFrameType, the value 0x0800(ipv4) or 0x86DD(ipv6) are reserved from setting. | ||||
| CtnQosExtQclLlcSsapType | 1.3.6.1.4.1.868.2.5.9.1.4.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The LLC SSAP type filter for matching the QCL. It is only significant if tnQosExtQclFrameType 'llc' is selected. The possible values are: any: No SSAP type filter is specified. (SSAP type filter status is 'don't-care'.) specific: Choose this value to filter a specific SSAP type value with this QCL.
| ||||
| CtnQosExtQclLlcSsapVal | 1.3.6.1.4.1.868.2.5.9.1.4.2.1.4 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current When tnQosExtQclLlcSsapType is selected 'Specific' value, you can enter a specific value. The allowed value is from 0 through 255. | ||||
| CtnQosExtQclLlcDsapType | 1.3.6.1.4.1.868.2.5.9.1.4.2.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The LLC DSAP type filter for matching the QCL. It is only significant if tnQosExtQclFrameType 'llc' is selected. The possible values are: any: No DSAP type filter is specified. (DSAP type filter status is 'don't-care'.) specific: Choose this value to filter a specific DSAP type value with this QCL.
| ||||
| CtnQosExtQclLlcDsapVal | 1.3.6.1.4.1.868.2.5.9.1.4.2.1.6 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current When tnQosExtQclLlcDsapType is selected 'Specific' value, you can enter a specific value. The allowed value is from 0 through 255. | ||||
| CtnQosExtQclLlcControlType | 1.3.6.1.4.1.868.2.5.9.1.4.2.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current The LLC Control type filter for matching the QCL. It is only significant if tnQosExtQclFrameType 'llc' is selected. The possible values are: any: No Control type filter is specified. (Control type filter status is 'don't-care'.) specific: Choose this value to filter a specific Control type value with this QCL.
| ||||
| CtnQosExtQclLlcControlVal | 1.3.6.1.4.1.868.2.5.9.1.4.2.1.8 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current When tnQosExtQclLlcControlType is selected 'Specific' value, you can enter a specific value. The allowed value is from 0 through 255. | ||||
| CtnQosExtQclSnapPidType | 1.3.6.1.4.1.868.2.5.9.1.4.2.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current The SNAP PID type filter for matching the QCL. It is only significant if tnQosExtQclFrameType 'snap' is selected. The possible values are: any: No SNAP PIDtype filter is specified. (SNAP PID type filter status is 'don't-care'.) specific: Choose this value to filter a specific SNAP PID type value with this QCL.
| ||||
| CtnQosExtQclSnapPidVal | 1.3.6.1.4.1.868.2.5.9.1.4.2.1.10 | INTEGER (1536..65535) | RW | |
column · INTEGER (1536..65535) · read-write · current When tnQosExtQclSnapPidType is selected 'Specific' value, you can enter a specific value. The allowed value is from 0x600 through 0xFFFF. If implement supports ipv4 or ipv6 selection in tnQosExtQclFrameType, the value 0x0800(ipv4) or 0x86DD(ipv6) are reserved from setting. | ||||
| TtnQosExtQclIpTable | 1.3.6.1.4.1.868.2.5.9.1.4.3 | NA | ||
table · not-accessible · current A table used to configure the QoS Control List IP settings. | ||||
| RtnQosExtQclIpEntry | 1.3.6.1.4.1.868.2.5.9.1.4.3.1 | NA | ||
row · not-accessible · current An entry in the table used to configure the QoS Control List IP settings.
| ||||
| CtnQosExtQclProtoType | 1.3.6.1.4.1.868.2.5.9.1.4.3.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The IP protocol for matching the QCL.The possible values are: any: No protocol filter is specified. (Protocol filter status is 'don't-care'.) udp: Specify the UDP for matching the QCL. tcp: Specify the TCP for matching the QCL. specific: Choose this value to filter a specific protocol value with this QCL.
| ||||
| CtnQosExtQclProtoVal | 1.3.6.1.4.1.868.2.5.9.1.4.3.1.2 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current When tnQosExtQclProtoType is selected 'Specific' value, you can enter a specific value. The allowed value is from 0 through 255. If implement supports udp or tcp selection in tnQosExtQclProtoType, the value 6(tcp) or 17(udp) are reserved from setting. | ||||
| CtnQosExtQclDscpType | 1.3.6.1.4.1.868.2.5.9.1.4.3.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The DSCP filter for matching the QCL. The possible values are: any: No DSCP filter is specified. (DSCP filter status is 'don't-care'.) specific: choose this value to filter a specific DSCP value with this QCL. range: Choose this value to filter a specific DSCP range filter with this QCL.
| ||||
| CtnQosExtQclDscpVal | 1.3.6.1.4.1.868.2.5.9.1.4.3.1.4 | INTEGER (0..63) | RW | |
column · INTEGER (0..63) · read-write · current When tnQosExtQclDscpType is selected 'Specific' value, you can enter a specific value. The allowed value is from 0 through 63. | ||||
| CtnQosExtQclDscpMin | 1.3.6.1.4.1.868.2.5.9.1.4.3.1.5 | INTEGER (0..63) | RW | |
column · INTEGER (0..63) · read-write · current When tnQosExtQclDscpType is selected 'Range' value, you can enter a specific range. this value should be lower than tnQosExtQclDscpMax value. The allowed range start is from 0 through 63. | ||||
| CtnQosExtQclDscpMax | 1.3.6.1.4.1.868.2.5.9.1.4.3.1.6 | INTEGER (0..63) | RW | |
column · INTEGER (0..63) · read-write · current When tnQosExtQclDscpType is selected 'Range' value, you can enter a specific range. this value should be higher than tnQosExtQclDscpMin value. The allowed range end is from 0 through 63. | ||||
| CtnQosExtQclSrcIpType | 1.3.6.1.4.1.868.2.5.9.1.4.3.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current The source IP address type filter for matching the QCL. The possible values are: any: No source IP address filter is specified. (source IP address filter status is 'don't-care'.) specific: Choose this value to filter a specific source IP address with this QCL.
| ||||
| CtnQosExtQclSrcIpAddrType | 1.3.6.1.4.1.868.2.5.9.1.4.3.1.8 | InetAddressType | RW | |
column · InetAddressType · read-write · current Specify the tnQosExtQclSrcIpAddr type. | ||||
| CtnQosExtQclSrcIpAddr | 1.3.6.1.4.1.868.2.5.9.1.4.3.1.9 | InetAddress | RW | |
column · InetAddress · read-write · current When tnQosExtQclSrcIpType is selected 'Specific' value, you can enter a specific host or network address. | ||||
| CtnQosExtQclSrcIpMaskType | 1.3.6.1.4.1.868.2.5.9.1.4.3.1.10 | InetAddressType | RW | |
column · InetAddressType · read-write · current Specify the tnQosExtQclSrcIpMask type. | ||||
| CtnQosExtQclSrcIpMask | 1.3.6.1.4.1.868.2.5.9.1.4.3.1.11 | InetAddress | RW | |
column · InetAddress · read-write · current When tnQosExtQclSrcIpType is selected 'Specific' value, you can enter a specific network mask for the source IP address. | ||||
| CtnQosExtQclIpv4Fragment | 1.3.6.1.4.1.868.2.5.9.1.4.3.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current The IPv4 Fragment for matching the QCL. This involves the settings for the More Fragments (MF) bit
and the Fragment Offset (FRAG OFFSET) field for an IPv4 frame. The possible values are:
any: The QCL will match any MF bit.
fragment: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater than zero must be
able to match this entry.
nonfragment: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater than zero must
not be able to match this entry.
| ||||
| CtnQosExtQclTcpUdpSportType | 1.3.6.1.4.1.868.2.5.9.1.4.3.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current The TCP/UDP source port for matching the QCL. It is only significant if protocol filter 'UDP' or 'TCP' is selected. The possible values are: any: No TCP/UDP source port filter is specified. (Source port filter status is 'don't-care'.) specific: Choose this value to filter a specific TCP/UDP source port No. with this QCL. range: Choose this value to filter a specific TCP/UDP source port range filter with this QCL.
| ||||
| CtnQosExtQclTcpUdpSportVal | 1.3.6.1.4.1.868.2.5.9.1.4.3.1.14 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current When tnQosExtQclTcpUdpSportType is selected 'Specific' value, you can enter a specific value. The allowed value is from 0 through 65535. | ||||
| CtnQosExtQclTcpUdpSportMin | 1.3.6.1.4.1.868.2.5.9.1.4.3.1.15 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current When tnQosExtQclTcpUdpSportType is selected 'Range' value, you can enter a specific range. this value should be lower than tnQosExtQclTcpUdpSportMax value. The allowed range start is from 0 through 65535. | ||||
| CtnQosExtQclTcpUdpSportMax | 1.3.6.1.4.1.868.2.5.9.1.4.3.1.16 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current When tnQosExtQclTcpUdpSportType is selected 'Range' value, you can enter a specific range. this value should be higher than tnQosExtQclTcpUdpSportMin value. The allowed range end is from 0 through 65535. | ||||
| CtnQosExtQclTcpUdpDportType | 1.3.6.1.4.1.868.2.5.9.1.4.3.1.17 | INTEGER | RW | |
column · INTEGER · read-write · current The TCP/UDP destination port for matching the QCL. It only significant if protocol filter 'UDP' or 'TCP' is selected. The possible values are: any: No TCP/UDP destination port filter is specified. (Source port filter status is 'don't-care'.) specific: Choose this value to filter a specific TCP/UDP source port No. with this QCL. range: Choose this value to filter a specific TCP/UDP source port range filter with this QCL.
| ||||
| CtnQosExtQclTcpUdpDportVal | 1.3.6.1.4.1.868.2.5.9.1.4.3.1.18 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current When tnQosExtQclTcpUdpDportVal is selected 'Specific' value, you can enter a specific value. The allowed value is from 0 through 65535. | ||||
| CtnQosExtQclTcpUdpDportMin | 1.3.6.1.4.1.868.2.5.9.1.4.3.1.19 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current When tnQosExtQclTcpUdpDportVal is selected 'Range' value, you can enter a specific range. this value should be lower than tnQosExtQclTcpUdpDportMax value. The allowed range start is from 0 through 65535. | ||||
| CtnQosExtQclTcpUdpDportMax | 1.3.6.1.4.1.868.2.5.9.1.4.3.1.20 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current When tnQosExtQclTcpUdpDportVal is selected 'Range' value, you can enter a specific range. this value should be higher than tnQosExtQclTcpUdpDportMin value. The allowed range end is from 0 through 65535. | ||||
Textual conventions
TnQosExtRateInFpsINTEGERfps1(1)fps1024k(21)fps128(8)fps128k(18)fps16(5)fps16384k(25)fps16k(15)fps1k(11)fps2(2)fps2048k(22)fps256(9)fps256k(19)fps2k(12)fps32(6)fps32768k(26)fps32k(16)fps4(3)fps4096k(23)fps4k(13)fps512(10)fps512k(20)fps64(7)fps64k(17)fps8(4)fps8192k(24)fps8k(14)T
TnQosExtRateUnitTypeINTEGERfps(2)kbps(1)kfps(4)mbps(3)T