TN-PTP-MIB
Transition Engineering Inc.The mib provides functionalities for managing PTP.
snmptranslate -m TN-PTP-MIB -Tpsnmpwalk -v2c -c <community> -m TN-PTP-MIB <host> 1.3.6.1.4.1.868.2.5.123Imports
| ENTITY-MIB | entPhysicalIndex |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressType, MODULE-IDENTITY, OBJECT-IDENTITY |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| TRANSITION-SMI | tnProducts |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| ItnPtpMIB | 1.3.6.1.4.1.868.2.5.123 | |||
identity The mib provides functionalities for managing PTP. | ||||
| NtnPtp | 1.3.6.1.4.1.868.2.5.123.1 | |||
| TtnPtpClkModesTable | 1.3.6.1.4.1.868.2.5.123.1.1 | NA | ||
table · not-accessible · current Table of SyncE External I/O | ||||
| RtnPtpClkModesEntry | 1.3.6.1.4.1.868.2.5.123.1.1.1 | NA | ||
| CtnPtpInState | 1.3.6.1.4.1.868.2.5.123.1.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current IEEE 1588 Input State.
| ||||
| CtnPtpOutState | 1.3.6.1.4.1.868.2.5.123.1.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current IEEE 1588 Output State.
| ||||
| CtnPtpInFreq | 1.3.6.1.4.1.868.2.5.123.1.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Clock frequency 1 PPS or 8k-25Mhz table of values.
| ||||
| CtnPtpOutFreq | 1.3.6.1.4.1.868.2.5.123.1.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The following values are possible: Editable value with the possible range of values are 1 - 25000000 (1 - 25MHz). | ||||
| CtnPtpImpedance | 1.3.6.1.4.1.868.2.5.123.1.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Select the impedance termination of the input clock. The following values are possible: 1. 50 : 50 ohm impedance. 2. 75 : 75 ohm impedance. 3. Hi-Z : no impedance termination driven, tri-stated or floating.
| ||||
| CtnPtpActualInFreq | 1.3.6.1.4.1.868.2.5.123.1.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The actual input frequency in Hz. | ||||
| CtnPtpActualOutFreq | 1.3.6.1.4.1.868.2.5.123.1.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The actual output frequency in Hz. If output state is disabled set to 0 | ||||
| TtnPtpCreateClkConfTable | 1.3.6.1.4.1.868.2.5.123.1.2 | NA | ||
table · not-accessible · current Table of PTP ClkInstance | ||||
| RtnPtpCreateClkConfEntry | 1.3.6.1.4.1.868.2.5.123.1.2.1 | NA | ||
row · not-accessible · current An entry in the table,tnPtpCreateClkConfTable | ||||
| CtnPtpCreateClkConfIndex | 1.3.6.1.4.1.868.2.5.123.1.2.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current Index of ptp clocks. | ||||
| CtnPtpDeviceType | 1.3.6.1.4.1.868.2.5.123.1.2.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates the Type of the Clock Instance. There are five Device Types. 1. Ord-Bound - clock's Device Type is Ordinary-Boundary Clock. 2. P2p Transp - clock's Device Type is Peer to Peer Transparent Clock. 3. E2e Transp - clock's Device Type is End to End Transparent Clock. 4. Master Only - clock's Device Type is Master Only. 5. Slave Only - clock's Device Type is Slave Only.
| ||||
| CtnPtpTwoStepFlag | 1.3.6.1.4.1.868.2.5.123.1.2.1.3 | TruthValue | RC | |
column · TruthValue · read-create · current Static member: defined by the system, true if two-step Sync events and Pdelay_Resp events are used. | ||||
| CtnPtpClockId | 1.3.6.1.4.1.868.2.5.123.1.2.1.4 | OCTET STRING (SIZE (0..256)) | RC | |
column · OCTET STRING (SIZE (0..256)) · read-create · current A unique clock identifier. | ||||
| CtnPtpOneWay | 1.3.6.1.4.1.868.2.5.123.1.2.1.5 | TruthValue | RC | |
column · TruthValue · read-create · current If true, one-way measurements are used. This parameter applies only to a slave. In one-way mode no delay measurements are performed, i.e. this is applicable only if frequency synchronization is needed. The master always responds to delay requests.. | ||||
| CtnPtpProtocol | 1.3.6.1.4.1.868.2.5.123.1.2.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Transport protocol used by the PTP protocol engine ethernet PTP over Ethernet multicast ip4multi PTP over IPv4 multicast ip4uni PTP over IPv4 unicast Note : IPv4 unicast protocol only works in Master only and Slave only clocks See parameter Device Type In a unicast Slave only clock you also need configure which master clocks to request Announce and Sync messages from. See: Unicast Slave Configuration.
| ||||
| CtnPtpVLANTag | 1.3.6.1.4.1.868.2.5.123.1.2.1.7 | TruthValue | RC | |
column · TruthValue · read-create · current Enables the VLAN tagging for the PTP frames. Note: Packets are only tagged if the port is configured for vlan tagging. i.e: Port Type != Unaware and PortVLAN mode == None, and the port is member of the VLAN. | ||||
| CtnPtpVID | 1.3.6.1.4.1.868.2.5.123.1.2.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current VLAN Identifier used for tagging the PTP frames. | ||||
| CtnPtpPCP | 1.3.6.1.4.1.868.2.5.123.1.2.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current Priority Code Point value used for PTP frames. | ||||
| CtnPtpClkConfRowStatus | 1.3.6.1.4.1.868.2.5.123.1.2.1.10 | RowStatus | RC | |
column · RowStatus · read-create · current The status of the row. The writable columns in a row cannot be changed if the row is active. All columns must have a valid value before a row can be activated. | ||||
| TtnPtpClkConf0Table | 1.3.6.1.4.1.868.2.5.123.1.3 | NA | ||
table · not-accessible · current Table of PTP ClkInstance | ||||
| RtnPtpClkConf0Entry | 1.3.6.1.4.1.868.2.5.123.1.3.1 | NA | ||
| CtnPtpClkConf0Index | 1.3.6.1.4.1.868.2.5.123.1.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the Instance of a particular Clock Instance [0..CLOCK_INST_MAX]. | ||||
| CtnPtpDefaultDom | 1.3.6.1.4.1.868.2.5.123.1.3.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Clock domain [0..127]. | ||||
| CtnPtpDefaultClockQuality | 1.3.6.1.4.1.868.2.5.123.1.3.1.3 | OCTET STRING (SIZE (0..256)) | RW | |
column · OCTET STRING (SIZE (0..256)) · read-write · current The clock quality is determined by the system, and holds 3 parts: Clock Class, Clock Accuracy and OffsetScaledLog Variance as defined in IEEE1588. The Clock Accuracy values are defined in IEEE1588 table 6 (Currently the clock Accuracy is set to 'Unknown' as default). | ||||
| CtnPtpDefaultPri1 | 1.3.6.1.4.1.868.2.5.123.1.3.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Clock priority 1 [0..255] used by the BMC master select algorithm. | ||||
| CtnPtpDefaultPri2 | 1.3.6.1.4.1.868.2.5.123.1.3.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Clock priority 2 [0..255] used by the BMC master select algorithm. | ||||
| CtnPtpTime | 1.3.6.1.4.1.868.2.5.123.1.3.1.6 | OCTET STRING (SIZE (0..256)) | RO | |
column · OCTET STRING (SIZE (0..256)) · read-only · current Shows the actual PTP time with nanosecond resolution. | ||||
| CtnPtpAdjustMethod | 1.3.6.1.4.1.868.2.5.123.1.3.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Shows the actual clock adjustment method. The method depends on the available hardware.
| ||||
| CtnPtpSynce | 1.3.6.1.4.1.868.2.5.123.1.3.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Activate to synchronize the System Clock to PTP Time.
| ||||
| TtnPtpClkConfTable | 1.3.6.1.4.1.868.2.5.123.1.4 | NA | ||
table · not-accessible · current Table of PTP ClkInstance | ||||
| RtnPtpClkConfEntry | 1.3.6.1.4.1.868.2.5.123.1.4.1 | NA | ||
| CtnPtpClkConfIndex | 1.3.6.1.4.1.868.2.5.123.1.4.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current Indicates the Instance of a particular Clock Instance [0..CLOCK_INST_MAX]. | ||||
| CtnPtpStpRm | 1.3.6.1.4.1.868.2.5.123.1.4.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Steps Removed : It is the number of PTP clocks traversed from the grandmaster to the local slave clock. | ||||
| CtnPtpOffset | 1.3.6.1.4.1.868.2.5.123.1.4.1.3 | OCTET STRING (SIZE (0..256)) | RO | |
column · OCTET STRING (SIZE (0..256)) · read-only · current Time difference between the master clock and the local slave clock, measured in ns. | ||||
| CtnPtpPathDelay | 1.3.6.1.4.1.868.2.5.123.1.4.1.4 | OCTET STRING (SIZE (0..256)) | RO | |
column · OCTET STRING (SIZE (0..256)) · read-only · current The mean propagation time for the link between the master and the local slave. | ||||
| CtnPtpDelayFilter | 1.3.6.1.4.1.868.2.5.123.1.4.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The default delay filter is a low pass filter, with a time constant of 2**DelayFilter*DelayRequestRate. The value must be in the range of 1..6. | ||||
| CtnPtpFilterPeriod | 1.3.6.1.4.1.868.2.5.123.1.4.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The default offset filter uses a minimum delay filter method i.e. The minimum measured offset during Period samples is used in the calculation. The value must be in the range of 1..1000. | ||||
| CtnPtpFilterDist | 1.3.6.1.4.1.868.2.5.123.1.4.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current The distance between two calculations is Dist periods. Note: In configurations with Timestamp enabled PHYs, the period is automatically increased, if (period*dist < SyncPackets pr sec/4), i.e. max 4 adjustments are made pr sec. If Dist is 1 the offset is averaged over the Period, If Dist is >1 the offset is calculated using 'min' offset. The value must be in the range of 1..10 | ||||
| CtnPtpParentPortId | 1.3.6.1.4.1.868.2.5.123.1.4.1.8 | OCTET STRING (SIZE (0..256)) | RO | |
column · OCTET STRING (SIZE (0..256)) · read-only · current Clock identity for the parent clock, if the local clock is not a slave, the value is the clocks own id. | ||||
| CtnPtpParentPort | 1.3.6.1.4.1.868.2.5.123.1.4.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Port Id for the parent master port. | ||||
| CtnPtpParentPStat | 1.3.6.1.4.1.868.2.5.123.1.4.1.10 | TruthValue | RO | |
column · TruthValue · read-only · current Parents Stats (always false). | ||||
| CtnPtpParentVar | 1.3.6.1.4.1.868.2.5.123.1.4.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current It is observed parent offset scaled log variance. | ||||
| CtnPtpParentChgRate | 1.3.6.1.4.1.868.2.5.123.1.4.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current Observed Parent Clock Phase Change Rate. i.e. the slave clocks rate offset compared to the master. (unit = ns per s). | ||||
| CtnPtpParentGMId | 1.3.6.1.4.1.868.2.5.123.1.4.1.13 | OCTET STRING (SIZE (0..256)) | RO | |
column · OCTET STRING (SIZE (0..256)) · read-only · current Clock identity for the grand master clock, if the local clock is not a slave, the value is the clocks own id. | ||||
| CtnPtpParentGMQual | 1.3.6.1.4.1.868.2.5.123.1.4.1.14 | OCTET STRING (SIZE (0..256)) | RO | |
column · OCTET STRING (SIZE (0..256)) · read-only · current The clock quality announced by the grand master. | ||||
| CtnPtpParentPri1 | 1.3.6.1.4.1.868.2.5.123.1.4.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current Clock priority 1 announced by the grand master. | ||||
| CtnPtpParentPri2 | 1.3.6.1.4.1.868.2.5.123.1.4.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current Clock priority 2 announced by the grand master. | ||||
| TtnPtpClkConf2Table | 1.3.6.1.4.1.868.2.5.123.1.5 | NA | ||
table · not-accessible · current Table 2 of PTP ClkInstance | ||||
| RtnPtpClkConf2Entry | 1.3.6.1.4.1.868.2.5.123.1.5.1 | NA | ||
| CtnPtpClkConfIndex2 | 1.3.6.1.4.1.868.2.5.123.1.5.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current Indicates the Instance of a particular Clock Instance [0..CLOCK_INST_MAX]. | ||||
| CtnPtpUtcOffset | 1.3.6.1.4.1.868.2.5.123.1.5.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Unicast Offset must be an integer value between 0 and 10000. | ||||
| CtnPtpValid | 1.3.6.1.4.1.868.2.5.123.1.5.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current Valid. | ||||
| CtnPtpLeap59 | 1.3.6.1.4.1.868.2.5.123.1.5.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current Leap 59. | ||||
| CtnPtpLeap61 | 1.3.6.1.4.1.868.2.5.123.1.5.1.5 | TruthValue | RW | |
column · TruthValue · read-write · current Leap 61. | ||||
| CtnPtpTimeTrac | 1.3.6.1.4.1.868.2.5.123.1.5.1.6 | TruthValue | RW | |
column · TruthValue · read-write · current Time Trac. | ||||
| CtnPtpFreqTrac | 1.3.6.1.4.1.868.2.5.123.1.5.1.7 | TruthValue | RW | |
column · TruthValue · read-write · current Freq Trac. | ||||
| CtnPtpTimeScale | 1.3.6.1.4.1.868.2.5.123.1.5.1.8 | TruthValue | RW | |
column · TruthValue · read-write · current Time Scale. | ||||
| CtnPtpTimeSource | 1.3.6.1.4.1.868.2.5.123.1.5.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current Time Source. Value of 0-255 | ||||
| CtnPtpDisplay | 1.3.6.1.4.1.868.2.5.123.1.5.1.10 | TruthValue | RW | |
column · TruthValue · read-write · current If true then Offset From Master, MeanPathDelay and clockAdjustment are logged on the debug terminal. | ||||
| CtnPtpPEnable | 1.3.6.1.4.1.868.2.5.123.1.5.1.11 | TruthValue | RW | |
column · TruthValue · read-write · current If true the P part of the algorithm is included. | ||||
| CtnPtpIEnable | 1.3.6.1.4.1.868.2.5.123.1.5.1.12 | TruthValue | RW | |
column · TruthValue · read-write · current If true the I part of the algorithm is included. | ||||
| CtnPtpDEnable | 1.3.6.1.4.1.868.2.5.123.1.5.1.13 | TruthValue | RW | |
column · TruthValue · read-write · current If true the D part of the algorithm is included. | ||||
| CtnPtpPConstant | 1.3.6.1.4.1.868.2.5.123.1.5.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current The default clock servo uses a PID regulator to calculate the current clock rate. i.e. clockAdjustment = OffsetFromMaster/ P constant + Integral(OffsetFromMaster)/ I constant + Differential OffsetFromMaster)/ D constant [1..1000]. | ||||
| CtnPtpIConstant | 1.3.6.1.4.1.868.2.5.123.1.5.1.15 | INTEGER | RW | |
column · INTEGER · read-write · current The default clock servo uses a PID regulator to calculate the current clock rate. i.e. clockAdjustment = OffsetFromMaster/ P constant + Integral(OffsetFromMaster)/ I constant + Differential OffsetFromMaster)/ D constant [1..10000]. | ||||
| CtnPtpDConstant | 1.3.6.1.4.1.868.2.5.123.1.5.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current The default clock servo uses a PID regulator to calculate the current clock rate. i.e. clockAdjustment = OffsetFromMaster/ P constant + Integral(OffsetFromMaster)/ I constant + Differential OffsetFromMaster)/ D constant [1..10000]. | ||||
| CtnPtpServoDelayFilter | 1.3.6.1.4.1.868.2.5.123.1.5.1.17 | INTEGER | RW | |
column · INTEGER · read-write · current The default delay filter is a low pass filter, with a time constant of 2**DelayFilter*DelayRequestRate. This is for the custom filter. | ||||
| TtnPtpUnicastSlaveTable | 1.3.6.1.4.1.868.2.5.123.1.6 | NA | ||
table · not-accessible · current Table of PTP Unicast Slave | ||||
| RtnPtpUnicastSlaveEntry | 1.3.6.1.4.1.868.2.5.123.1.6.1 | NA | ||
row · not-accessible · current An entry in the table,tnPtpUnicastSlaveTable | ||||
| CtnPtpUnicastInstIndex | 1.3.6.1.4.1.868.2.5.123.1.6.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current Indicates the Instance of a particular Clock Instance [0..3]. | ||||
| CtnPtpUnicastSlaveIndex | 1.3.6.1.4.1.868.2.5.123.1.6.1.2 | INTEGER | NA | |
column · INTEGER · not-accessible · current Indicates the Instance of a particular Unicast Slave [0..4]. | ||||
| CtnPtpUnicastDuration | 1.3.6.1.4.1.868.2.5.123.1.6.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The number of seconds a master is requested to send Announce/Sync messages. The request is repeated from the slave each Duration/4 seconds. [10..1000]. | ||||
| CtnPtpIPAddress | 1.3.6.1.4.1.868.2.5.123.1.6.1.4 | InetAddress | RW | |
column · InetAddress · read-write · current IPv4 Address of the Master clock. | ||||
| CtnPtpGrant | 1.3.6.1.4.1.868.2.5.123.1.6.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The granted repetition period for the sync message. | ||||
| CtnPtpCommState | 1.3.6.1.4.1.868.2.5.123.1.6.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The state of the communication with the master, possible values are: IDLE : The entry is not in use. INIT : Announce is sent to the master (Waiting for a response). CONN : The master has responded. SELL : The assigned master is selected as current master. SYNC : The master is sending Sync messages.
| ||||
| TtnPtpPortConfTable | 1.3.6.1.4.1.868.2.5.123.1.7 | NA | ||
table · not-accessible · current Table of PTP Clock Port Data Set Configuration | ||||
| RtnPtpPortConfEntry | 1.3.6.1.4.1.868.2.5.123.1.7.1 | NA | ||
row · not-accessible · current An entry in the table,tnPtpPortConfTable | ||||
| CtnPtpPortConfInstIndex | 1.3.6.1.4.1.868.2.5.123.1.7.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current Indicates the Instance of a particular Clock Instance [0..3]. | ||||
| CtnPtpPortConfIndex | 1.3.6.1.4.1.868.2.5.123.1.7.1.2 | INTEGER | NA | |
column · INTEGER · not-accessible · current Static member port Identity : Port number [1..max port no]. | ||||
| CtnPtpStat | 1.3.6.1.4.1.868.2.5.123.1.7.1.3 | OCTET STRING | NA | |
column · OCTET STRING · not-accessible · current Dynamic member portState: Current state of the port. | ||||
| CtnPtpMDR | 1.3.6.1.4.1.868.2.5.123.1.7.1.4 | INTEGER | NA | |
column · INTEGER · not-accessible · current Dynamic member log Min Delay Req Interval: The delay request interval announced by the master. | ||||
| CtnPtpMeanPath | 1.3.6.1.4.1.868.2.5.123.1.7.1.5 | OCTET STRING | NA | |
column · OCTET STRING · not-accessible · current The path delay measured by the port in P2P mode. In E2E mode this value is 0. | ||||
| CtnPtpAnv | 1.3.6.1.4.1.868.2.5.123.1.7.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current The interval for issuing announce messages in master state. [-3..4] | ||||
| CtnPtpATO | 1.3.6.1.4.1.868.2.5.123.1.7.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current The timeout for receiving announce messages on the port. [-1..10] | ||||
| CtnPtpSyv | 1.3.6.1.4.1.868.2.5.123.1.7.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current The interval for issuing sync messages in master. [-7..4] | ||||
| CtnPtpSyncIntErr | 1.3.6.1.4.1.868.2.5.123.1.7.1.9 | TruthValue | NA | |
column · TruthValue · not-accessible · current Synce Interval Error truth value | ||||
| CtnPtpDim | 1.3.6.1.4.1.868.2.5.123.1.7.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current Configurable member delayMechanism: The delay mechanism used for the port: e2e End to end delay measurement p2p Peer to peer delay measurement. Can be defined per port in an Ordinary/Boundary clock. In a transparent clock all ports use the same delay mechanism, determined by the clock type.
| ||||
| CtnPtpMPR | 1.3.6.1.4.1.868.2.5.123.1.7.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current The interval for issuing Delay_Req messages for the port in E2e mode. This value is announced from the master to the slave in an announce message. The value is reflected in the MDR field in the Slave The interval for issuing Pdelay_Req messages for the port in P2P mode Note: The interpretation of this parameter has changed from release 2.40. In earlier versions the value was interpreted relative to the Sync interval, this was a violation of the standard, so now the value is interpreted as an interval. I.e. MPR = 0 =>1 Delay_Req pr sec, independent of the Sync rate. [-7..5] | ||||
| CtnPtpDelayAsym | 1.3.6.1.4.1.868.2.5.123.1.7.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current If the transmission delay for a link in not symmetric, the asymmetry can be configured here, see IEEE 1588 Section 7.4.2 Communication path asymmetry. [-100000..100000] | ||||
| CtnPtpIngerssLat | 1.3.6.1.4.1.868.2.5.123.1.7.1.13 | INTEGER | RC | |
column · INTEGER · read-create · current Ingress latency measured in ns, as defined in IEEE 1588 Section 7.3.4.2. [-100000..100000] | ||||
| CtnPtpEgressLat | 1.3.6.1.4.1.868.2.5.123.1.7.1.14 | INTEGER | RC | |
column · INTEGER · read-create · current Egress latency measured in ns, as defined in IEEE 1588 Section 7.3.4.2. [-100000..100000] | ||||
| CtnPtpVersion | 1.3.6.1.4.1.868.2.5.123.1.7.1.15 | INTEGER | NA | |
column · INTEGER · not-accessible · current The current implementation only supports PTP version 2. | ||||
| CtnPtpPortConfRowStatus | 1.3.6.1.4.1.868.2.5.123.1.7.1.16 | RowStatus | RC | |
column · RowStatus · read-create · current The status of the row. The writable columns in a row cannot be changed if the row is active. All columns must have a valid value before a row can be activated. | ||||