TN-PROV-MIB
Transition Engineering Inc.The mib for configuration backup and restore of the device.
snmptranslate -m TN-PROV-MIB -Tpsnmpwalk -v2c -c <community> -m TN-PROV-MIB <host> 1.3.6.1.4.1.868.2.5.110Imports
| ENTITY-MIB | entPhysicalIndex |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
| TRANSITION-SMI | tnProducts |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| ItnProvMIB | 1.3.6.1.4.1.868.2.5.110 | |||
identity The mib for configuration backup and restore of the device. | ||||
| NtnProvObjects | 1.3.6.1.4.1.868.2.5.110.1 | |||
| NtnProvGroup | 1.3.6.1.4.1.868.2.5.110.1.1 | |||
| TtnProvTable | 1.3.6.1.4.1.868.2.5.110.1.1.1 | NA | ||
table · not-accessible · current This table displays and sets backup/restore configuration of individual device. | ||||
| RtnProvEntry | 1.3.6.1.4.1.868.2.5.110.1.1.1.1 | NA | ||
row · not-accessible · current This entry represents a provision configuration of individual device.
| ||||
| CtnProvType | 1.3.6.1.4.1.868.2.5.110.1.1.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Provision operation type:
backup/download(1) : backup/download the configuration of the device.
restore/upload(2) : restore/upload the configuration onto the device.
saveStartupConfig(3) : copies running-config to startup-config, thereby ensuring
that the currently active configuration will be used at
the next reboot.
activate(4) : It is possible to activate any of the configuration files present
on the switch, except for running-config which represents the
currently active configuration.
delete(5) : It is possible to delete any of the writable files stored in flash,
including startup-config. If this is done and the switch is rebooted
without a prior Save operation, this effectively resets the switch
to default configuration. running-config and default-config cannot be
deleted.
| ||||
| CtnProvAddrType | 1.3.6.1.4.1.868.2.5.110.1.1.1.1.2 | InetAddressType | RW | |
column · InetAddressType · read-write · current The target device IP address type. | ||||
| CtnProvAddr | 1.3.6.1.4.1.868.2.5.110.1.1.1.1.3 | InetAddress | RW | |
column · InetAddress · read-write · current The target device IP address. | ||||
| CtnProvFile | 1.3.6.1.4.1.868.2.5.110.1.1.1.1.4 | DisplayString | RW | |
column · DisplayString · read-write · current tnProvFile is used to specify the configuration file. This field is used in combination with tnProvType as below: For Download/backup(1), source file name on the switch. For Upload/restore(2), source file name on the ftp server. For saveStartupConfig(3), it is ignored. For activate(4), it is the file on the switch to be actiavted (except running-config file). For delete(5), it is the file wname to be delete from the switch. | ||||
| CtnProvOper | 1.3.6.1.4.1.868.2.5.110.1.1.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Provision operation type: start(1) : start provision operation. doNothing(2) : just read value. tnProvOper should be the last object to be set for the operation. That means when you set it to 'start', the operation specified in tnProvType will be triggerd.
| ||||
| CtnProvResult | 1.3.6.1.4.1.868.2.5.110.1.1.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Provision operation type: success(1) : provision process succeeded. fail(2) : provision process failed. inProgress(3): provision is in progress.
| ||||
| CtnProvDstFile | 1.3.6.1.4.1.868.2.5.110.1.1.1.1.7 | DisplayString | RW | |
column · DisplayString · read-write · current tnProvDstFile specifies the target file name. For Download/backup(1), destination file name on the ftp server. For Upload/restore(2), destination file name on the switch. For saveStartupConfig(3), it is ignored. For activate(4), it is ignored. For delete(5), it is ignored. | ||||