TN-LINK-OAM-MIB
Transition Engineering Inc.The mib module for managing Link OAM.
snmptranslate -m TN-LINK-OAM-MIB -Tpsnmpwalk -v2c -c <community> -m TN-LINK-OAM-MIB <host> 1.3.6.1.4.1.868.2.5.140Imports
| DOT3-OAM-MIB | dot3OamEntry, dot3OamEventConfigEntry, dot3OamPeerEntry, dot3OamStatsEntry |
|---|---|
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
| TRANSITION-SMI | tnProducts |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| ItnLinkOamMIB | 1.3.6.1.4.1.868.2.5.140 | |||
identity The mib module for managing Link OAM. | ||||
| NtnLinkOamNotifications | 1.3.6.1.4.1.868.2.5.140.0 | |||
| NtnLinkOamObjects | 1.3.6.1.4.1.868.2.5.140.1 | |||
| TtnLinkOamPortConfigTable | 1.3.6.1.4.1.868.2.5.140.1.1 | NA | ||
table · not-accessible · current This table allows the user to inspect the current Link OAM port configurations, and change them as well. | ||||
| RtnLinkOamPortConfigEntry | 1.3.6.1.4.1.868.2.5.140.1.1.1 | NA | ||
row · not-accessible · current An entry in the table that contains information of OAM port configurations.
| ||||
| CtnLinkOamLoopbackSupport | 1.3.6.1.4.1.868.2.5.140.1.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Controls whether the loopback support is enabled for the switch port. Link OAM remote loopback can be used for fault localization and link performance testing. Enabling the loopback support will allow the DTE to execute the remote loopback command that helps in the fault detection.
| ||||
| CtnLinkOamLinkMonitorSupport | 1.3.6.1.4.1.868.2.5.140.1.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Controls whether the Link Monitor support is enabled for the switch port. On enabling the Link Monitor support, the DTE supports event notification that permits the inclusion of diagnostic information.
| ||||
| CtnLinkMIBRetrievalSupport | 1.3.6.1.4.1.868.2.5.140.1.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Controls whether the MIB Retrieval Support is enabled for the switch port. On enabling the MIB retrieval support, the DTE supports polling of various Link OAM based MIB variables' contents.
| ||||
| CtnLinkOamLoopbackOperation | 1.3.6.1.4.1.868.2.5.140.1.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current If the Loopback support is enabled, enabling this field will start a loopback operation for the port.
| ||||
| TtnLinkOamStatisticsTable | 1.3.6.1.4.1.868.2.5.140.1.2 | NA | ||
table · not-accessible · current This table contains statistics for the OAM function on a particular Ethernet-like interface. There is an entry in the table for every entry in the tnLinkOamTable. The displayed counters represent the total number of OAM frames received and transmitted for the selected port. Discontinuities of these counter can occur at re-initialization of the management system. | ||||
| RtnLinkOamStatisticsEntry | 1.3.6.1.4.1.868.2.5.140.1.2.1 | NA | ||
row · not-accessible · current An entry in the table containing statistics information on the Ethernet OAM function for a single Ethernet-like interface.
| ||||
| CtnLinkOamLinkfaultPDUsRx | 1.3.6.1.4.1.868.2.5.140.1.2.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Link fault PDU's received.
| ||||
| CtnLinkOamLinkfaultPDUsTx | 1.3.6.1.4.1.868.2.5.140.1.2.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Link fault PDU's transmitted.
| ||||
| CtnLinkOamDyingGaspRx | 1.3.6.1.4.1.868.2.5.140.1.2.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Dying Gasp events received.
| ||||
| CtnLinkOamDyingGaspTx | 1.3.6.1.4.1.868.2.5.140.1.2.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Dying Gasp events transmitted.
| ||||
| CtnLinkOamCriticalEventPDUsRx | 1.3.6.1.4.1.868.2.5.140.1.2.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Critical event PDU's received.
| ||||
| CtnLinkOamCriticalEventPDUsTx | 1.3.6.1.4.1.868.2.5.140.1.2.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current A count of the number of Critical event PDU's transmitted.
| ||||
| TtnLinkOamLocalPortConfigStatusTable | 1.3.6.1.4.1.868.2.5.140.1.3 | NA | ||
table · not-accessible · current This table provides Local Link OAM configuration operational status. | ||||
| RtnLinkOamLocalPortConfigStatusEntry | 1.3.6.1.4.1.868.2.5.140.1.3.1 | NA | ||
row · not-accessible · current An entry in the table containing information of Peer Link OAM configuration operational status.
| ||||
| CtnLinkOamPDUPermission | 1.3.6.1.4.1.868.2.5.140.1.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current This field is available only for the Local DTE. It displays the current permission rules set for the local DTE. Possible values are 'Link fault', 'Receive only', 'Information exchange only', 'ANY'.
| ||||
| CtnLinkOamLocalMultiplexerState | 1.3.6.1.4.1.868.2.5.140.1.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current When in forwarding state, the Device is forwarding non-OAMPDUs to the lower sublayer. Incase of discarding, the device discards all the non-OAMPDU's.
| ||||
| CtnLinkOamLocalParserState | 1.3.6.1.4.1.868.2.5.140.1.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current When in forwarding state, Device is forwarding non-OAMPDUs to higher sublayer. When in loopback, Device is looping back non-OAMPDUs to the lower sublayer. When in discarding state, Device is discarding non-OAMPDUs.
| ||||
| CtnLinkOamLocalOrganizationalUniqueIdentifi | 1.3.6.1.4.1.868.2.5.140.1.3.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current 24-bit Organizationally Unique Identifier of the vendor. | ||||
| TtnLinkOamPeerPortConfigStatusTable | 1.3.6.1.4.1.868.2.5.140.1.4 | NA | ||
table · not-accessible · current This table provides Peer Link OAM configuration operational status. | ||||
| RtnLinkOamPeerPortConfigStatusEntry | 1.3.6.1.4.1.868.2.5.140.1.4.1 | NA | ||
row · not-accessible · current An entry in the table containing information of Peer Link OAM configuration operational status.
| ||||
| CtnLinkOamPeerMultiplexerState | 1.3.6.1.4.1.868.2.5.140.1.4.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current When in forwarding state, the Device is forwarding non-OAMPDUs to the lower sublayer. Incase of discarding, the device discards all the non-OAMPDU's.
| ||||
| CtnLinkOamPeerParserState | 1.3.6.1.4.1.868.2.5.140.1.4.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current When in forwarding state, Device is forwarding non-OAMPDUs to higher sublayer. When in loopback, Device is looping back non-OAMPDUs to the lower sublayer. When in discarding state, Device is discarding non-OAMPDUs.
| ||||
| CtnLinkOamPeerOrganizationalUniqueIdentifi | 1.3.6.1.4.1.868.2.5.140.1.4.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current 24-bit Organizationally Unique Identifier of the vendor. | ||||
| TtnLinkOamLinkEventStatusTable | 1.3.6.1.4.1.868.2.5.140.1.5 | NA | ||
table · not-accessible · current This table shows frame error status. | ||||
| RtnLinkOamLinkEventStatusEntry | 1.3.6.1.4.1.868.2.5.140.1.5.1 | NA | ||
row · not-accessible · current An entry in the table containing information of frame error status. | ||||
| CtnLinkOamLocationIndex | 1.3.6.1.4.1.868.2.5.140.1.5.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The index of the loacation of the OAM unit event status accessed. When the value of index is '1', the table will display the Event status for the Local OAM unit. While the value is '2', the table will display the status for the Peer for the respective port. | ||||
| CtnLinkOamSequenceNumber | 1.3.6.1.4.1.868.2.5.140.1.5.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current This two-octet field indicates the total number of events occurred at the remote end. | ||||
| CtnLinkOamFrameErrorEventTimestamp | 1.3.6.1.4.1.868.2.5.140.1.5.1.3 | TimeStamp | RO | |
column · TimeStamp · read-only · current This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals. | ||||
| CtnLinkOamFrameErrorEventWindow | 1.3.6.1.4.1.868.2.5.140.1.5.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current This two-octet field indicates the duration of the period in terms of 100 ms intervals. 1) The default value is one second. 2) The lower bound is one second. 3) The upper bound is one minute. | ||||
| CtnLinkOamFrameErrorEventThreshold | 1.3.6.1.4.1.868.2.5.140.1.5.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current This four-octet field indicates the number of detected errored frames in the period is required to be equal to or greater than in order for the event to be generated. 1) The default value is one frame error. 2) The lower bound is zero frame errors. 3) The upper bound is unspecified. | ||||
| CtnLinkOamFrameErrors | 1.3.6.1.4.1.868.2.5.140.1.5.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current This four-octet field indicates the number of detected errored frames in the period. | ||||
| CtnLinkOamTotalFrameErrors | 1.3.6.1.4.1.868.2.5.140.1.5.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current This eight-octet field indicates the sum of errored frames that have been detected since the OAM sublayer was reset. | ||||
| CtnLinkOamTotalFrameErrorEvents | 1.3.6.1.4.1.868.2.5.140.1.5.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current This four-octet field indicates the number of Errored Frame Event TLVs that have been generated since the OAM sublayer was reset. | ||||
| CtnLinkOamFramePeriodErrorEventTimestamp | 1.3.6.1.4.1.868.2.5.140.1.5.1.9 | TimeStamp | RO | |
column · TimeStamp · read-only · current This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals. | ||||
| CtnLinkOamFramePeriodErrorEventWindow | 1.3.6.1.4.1.868.2.5.140.1.5.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current This four-octet field indicates the duration of period in terms of frames. | ||||
| CtnLinkOamFramePeriodErrorEventThreshold | 1.3.6.1.4.1.868.2.5.140.1.5.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current This four-octet field indicates the number of errored frames in the period is required to be equal to or greater than in order for the event to be generated. | ||||
| CtnLinkOamFramePeriodsErrors | 1.3.6.1.4.1.868.2.5.140.1.5.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current This four-octet field indicates the number of frame errors in the period. | ||||
| CtnLinkOamTotalFramePeriodsErrors | 1.3.6.1.4.1.868.2.5.140.1.5.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current This eight-octet field indicates the sum of frame errors that have been detected since the OAM sublayer was reset. | ||||
| CtnLinkOamTotalFramePerioderrorEvents | 1.3.6.1.4.1.868.2.5.140.1.5.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current This four-octet field indicates the number of Errored Frame Period Event TLVs that have been generated since the OAM sublayer was reset. | ||||
| CtnLinkOamSymbolPeriodErrorEventTimestamp | 1.3.6.1.4.1.868.2.5.140.1.5.1.15 | TimeStamp | RO | |
column · TimeStamp · read-only · current This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals. | ||||
| CtnLinkOamSymbolPeriodErrorEventWindow | 1.3.6.1.4.1.868.2.5.140.1.5.1.16 | Counter64 | RO | |
column · Counter64 · read-only · current This eight-octet field indicates the number of symbols in the period. | ||||
| CtnLinkOamSymbolPeriodErrorEventThreshold | 1.3.6.1.4.1.868.2.5.140.1.5.1.17 | Counter64 | RO | |
column · Counter64 · read-only · current This eight-octet field indicates the number of errored symbols in the period is required to be equal to or greater than in order for the event to be generated. | ||||
| CtnLinkOamSymbolPeriodsErrors | 1.3.6.1.4.1.868.2.5.140.1.5.1.18 | Counter64 | RO | |
column · Counter64 · read-only · current This eight-octet field indicates the number of symbol errors in the period. | ||||
| CtnLinkOamSymbolFramePeriodErrors | 1.3.6.1.4.1.868.2.5.140.1.5.1.19 | Counter64 | RO | |
column · Counter64 · read-only · current This eight-octet field indicates the sum of symbol errors since the OAM sublayer was reset. | ||||
| CtnLinkOamTotalSymbolFramePerioderrorEvents | 1.3.6.1.4.1.868.2.5.140.1.5.1.20 | Counter32 | RO | |
column · Counter32 · read-only · current This four-octet field indicates the number of Errored Symbol Period Event TLVs that have been generated since the OAM sublayer was reset. | ||||
| CtnLinkOamEventSecondsSummaryTimestamp | 1.3.6.1.4.1.868.2.5.140.1.5.1.21 | TimeStamp | RO | |
column · TimeStamp · read-only · current This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals, encoded as a 16-bit unsigned integer. | ||||
| CtnLinkOamEventSecondsSummaryWindow | 1.3.6.1.4.1.868.2.5.140.1.5.1.22 | Counter32 | RO | |
column · Counter32 · read-only · current This two-octet field indicates the duration of the period in terms of 100 ms intervals, encoded as a 16-bit unsigned integer. | ||||
| CtnLinkOamEventSecondsSummaryThreshold | 1.3.6.1.4.1.868.2.5.140.1.5.1.23 | Counter32 | RO | |
column · Counter32 · read-only · current This two-octet field indicates the number of errored frame seconds in the period is required to be equal to or greater than in order for the event to be generated, encoded as a 16-bit unsigned integer. | ||||
| CtnLinkOamEventSecondsSummarysEvents | 1.3.6.1.4.1.868.2.5.140.1.5.1.24 | Counter32 | RO | |
column · Counter32 · read-only · current This two-octet field indicates the number of errored frame seconds in the period, encoded as a 16-bit unsigned integer. | ||||
| CtnLinkOamEventSecondsSummaryErrorTotal | 1.3.6.1.4.1.868.2.5.140.1.5.1.25 | Counter32 | RO | |
column · Counter32 · read-only · current This four-octet field indicates the sum of errored frame seconds that have been detected since the OAM sublayer was reset. | ||||
| CtnLinkOamTotalEventSecondsSummaryEventTotal | 1.3.6.1.4.1.868.2.5.140.1.5.1.26 | Counter32 | RO | |
column · Counter32 · read-only · current This four-octet field indicates the number of Errored Frame Seconds Summary Event TLVs that have been generated since the OAM sublayer was reset, encoded as a 32bit unsigned integer. | ||||
| NtnLinkOamConformance | 1.3.6.1.4.1.868.2.5.140.2 | |||