TN-ETHSOAM-MIB
Transition Engineering Inc.TBD
snmptranslate -m TN-ETHSOAM-MIB -Tpsnmpwalk -v2c -c <community> -m TN-ETHSOAM-MIB <host> 1.3.6.1.4.1.868.2.5.105Imports
| IEEE8021-CFM-MIB | dot1agCfmLtrEntry, dot1agCfmMepEntry, dot1agCfmMepIdentifier |
|---|---|
| IEEE8021-TC-MIB | IEEE8021PriorityValue |
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero |
| Q-BRIDGE-MIB | VlanId, VlanIdOrNone |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| TRANSITION-SMI | tnProducts |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| ItnEthSoamMIB | 1.3.6.1.4.1.868.2.5.105 | |||
identity TBD | ||||
| NtnEthSoamMIBNotifications | 1.3.6.1.4.1.868.2.5.105.0 | |||
| !tnEthSoamFaultAlarm | 1.3.6.1.4.1.868.2.5.105.0.1 | |||
notification · current An EthSoam has a persistent defect condition. A notification
(fault alarm) is sent to the management entity with the OID
of the EthSoam that has detected the fault.
The management entity receiving the notification can identify
the system from the network source address of the
notification, and can identify the EthSoam reporting the defect
by the indices in the OID of the variables in the notification:
tnEthSoamInstance - Also the index of the EthSoam status table entry
(tnEthSoamStatusTable). | ||||
| !tnEthSoamPeerFaultAlarm | 1.3.6.1.4.1.868.2.5.105.0.2 | |||
notification · current An EthSoamPeer has a persistent defect condition. A notification
(fault alarm) is sent to the management entity with the OID
of the EthSoamPeer that has detected the fault.
The management entity receiving the notification can identify
the system from the network source address of the
notification, and can identify the EthSoamPeer reporting the defect
by the indices in the OID of the variables in the notification:
tnEthSoamInstance - Also the index of the EthSoam Peer status table entry
(tnEthSoamPeerStatusTable).
tnEthSoamPeerStatusMepId - Also the index of the EthSoam Peer status table entry
(tnEthSoamPeerStatusTable). | ||||
| NtnEthSoamMIBObjects | 1.3.6.1.4.1.868.2.5.105.1 | |||
| NtnEthSoamMPMgmt | 1.3.6.1.4.1.868.2.5.105.1.1 | |||
| TtnEthSoamMPTable | 1.3.6.1.4.1.868.2.5.105.1.1.1 | NA | ||
table · not-accessible · current This table provides configuration of SOAM Maintenance Point. | ||||
| RtnEthSoamMPEntry | 1.3.6.1.4.1.868.2.5.105.1.1.1.1 | NA | ||
row · not-accessible · current A entry in the table represents a configuration for local SOAM.
| ||||
| CtnEthSoaminstance | 1.3.6.1.4.1.868.2.5.105.1.1.1.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current This is the configuration of the two possible Maintenance Association Identifier formats. ITU ICC: This is defined by ITU. 'ICC' can be max. 6 char. 'MEG id' can be max. 7 char. IEEE String: This is defined by IEEE. 'Domain Name' can be max. 8 char. 'MEG id' can be max. 8 char. | ||||
| CtnEthSoamDomaintype | 1.3.6.1.4.1.868.2.5.105.1.1.1.1.2 | TnEthSoamType | RC | |
column · TnEthSoamType · read-create · current The Domain Mode affects the OAM. The allowed values are Port: This is a MEP in the Port Domain. 'Flow Instance' is a Port. Esp: Future use. Evc: This is a MEP in the EVC Domain. 'Flow Instance' is a EVC. Mpls: Future use. Vlan: This is a MEP in the VLAN Domain. 'Flow Instance' is a VLAN. | ||||
| CtnEthSoamMode | 1.3.6.1.4.1.868.2.5.105.1.1.1.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current MEP: This is a Maintenance Entity End Point. MIP: This is a Maintenance Entity Intermediate Point.
| ||||
| CtnEthSoamdirection | 1.3.6.1.4.1.868.2.5.105.1.1.1.1.4 | Dot1agCfmMpDirection | RC | |
column · Dot1agCfmMpDirection · read-create · current Direction in which the MP faces on the Bridge Port. | ||||
| CtnEthSoamresidencePort | 1.3.6.1.4.1.868.2.5.105.1.1.1.1.5 | InterfaceIndex | RC | |
column · InterfaceIndex · read-create · current This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP is attached. | ||||
| CtnEthSoamlevel | 1.3.6.1.4.1.868.2.5.105.1.1.1.1.6 | Dot1agCfmMDLevel | RC | |
column · Dot1agCfmMDLevel · read-create · current Level of the Maintenance Point. | ||||
| CtnEthSoamFlowInstance | 1.3.6.1.4.1.868.2.5.105.1.1.1.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current The MEP is related to this flow - See 'Domain'. | ||||
| CtnEthSoamTaggedVID | 1.3.6.1.4.1.868.2.5.105.1.1.1.1.8 | VlanIdOrNone | RC | |
column · VlanIdOrNone · read-create · current Port MEP: An outer C/S-tag (depending on VLAN Port Type) is added with this VID. Entering '0' means no TAG added. | ||||
| CtnEthSoamAlarm | 1.3.6.1.4.1.868.2.5.105.1.1.1.1.9 | TruthValue | RO | |
column · TruthValue · read-only · current An active alarm on the MEP. | ||||
| CtnEthSoamStatus | 1.3.6.1.4.1.868.2.5.105.1.1.1.1.11 | RowStatus | RC | |
column · RowStatus · read-create · current The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. | ||||
| NtnEthSoamPeerCfgMgmt | 1.3.6.1.4.1.868.2.5.105.1.2 | |||
| TtnEthSoamPeerCfgTable | 1.3.6.1.4.1.868.2.5.105.1.2.1 | NA | ||
table · not-accessible · current This table has entries which generate a configuration for peer SOAM. | ||||
| RtnEthSoamPeerCfgEntry | 1.3.6.1.4.1.868.2.5.105.1.2.1.1 | NA | ||
row · not-accessible · current A entry in the table represents a configuration for peer SOAM. | ||||
| CtnEthSoamPeerCfgMepId | 1.3.6.1.4.1.868.2.5.105.1.2.1.1.1 | Dot1agCfmMepId | NA | |
column · Dot1agCfmMepId · not-accessible · current The ID of the MEP. | ||||
| CtnEthSoamPeerCfgUnicastMac | 1.3.6.1.4.1.868.2.5.105.1.2.1.1.2 | MacAddress | RW | |
column · MacAddress · read-write · current This MAC will be used when unicast is selected with this peer MEP. Also this MAC is used to create HW checking of receiving CCM PDU (LOC detection) from this MEP. | ||||
| CtnEthSoamPeerCfgRowState | 1.3.6.1.4.1.868.2.5.105.1.2.1.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current row status. | ||||
| NtnEthSoamPeerStatusMgmt | 1.3.6.1.4.1.868.2.5.105.1.3 | |||
| TtnEthSoamPeerStatusTable | 1.3.6.1.4.1.868.2.5.105.1.3.1 | NA | ||
table · not-accessible · current This table provides configuration about the SOAM that provide OAM services. | ||||
| RtnEthSoamPeerStatusEntry | 1.3.6.1.4.1.868.2.5.105.1.3.1.1 | NA | ||
row · not-accessible · current This entry represents configuration about the SOAM that provide OAM services. | ||||
| CtnEthSoamPeerStatusMepId | 1.3.6.1.4.1.868.2.5.105.1.3.1.1.1 | Dot1agCfmMepId | NA | |
column · Dot1agCfmMepId · not-accessible · current MEPID. | ||||
| CtnEthSoamPeerStatuscLOC | 1.3.6.1.4.1.868.2.5.105.1.3.1.1.2 | TruthValue | RO | |
column · TruthValue · read-only · current Fault Cause indicating that no CCM has been received (in 3,5 periods) - from this peer MEP. | ||||
| CtnEthSoamPeerStatuscRDI | 1.3.6.1.4.1.868.2.5.105.1.3.1.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current Fault Cause indicating that a CCM is received with Remote Defect Indication - from this peer MEP. | ||||
| CtnEthSoamPeerStatuscPeriod | 1.3.6.1.4.1.868.2.5.105.1.3.1.1.4 | TruthValue | RO | |
column · TruthValue · read-only · current Fault Cause indicating that a CCM is received with a period different what is configured for this MEP - from this peer MEP. | ||||
| CtnEthSoamPeerStatuscPriority | 1.3.6.1.4.1.868.2.5.105.1.3.1.1.5 | TruthValue | RO | |
column · TruthValue · read-only · current Fault Cause indicating that a CCM is received with a priority different what is configured for this MEP - from this peer MEP. | ||||
| NtnEthSoamAPSCfgMgmt | 1.3.6.1.4.1.868.2.5.105.1.4 | |||
| TtnEthSoamAPSCfgTable | 1.3.6.1.4.1.868.2.5.105.1.4.1 | NA | ||
table · not-accessible · current This table provides configuration about the APSCfg that provide OAM services. | ||||
| RtnEthSoamAPSCfgEntry | 1.3.6.1.4.1.868.2.5.105.1.4.1.1 | NA | ||
row · not-accessible · current This entry represents configuration about the SOAM that provide OAM services.
| ||||
| CtnEthSoamAPSCfgEnable | 1.3.6.1.4.1.868.2.5.105.1.4.1.1.1 | TruthValue | RC | |
column · TruthValue · read-create · current Automatic Protection Switching protocol information transportation based on transmitting/receiving R-APS/L-APS PDU can be enabled/disabled. Must be enabled to support ERPS/ELPS implementing APS. This is only valid with one Peer MEP configured. | ||||
| CtnEthSoamAPSCfgPriority | 1.3.6.1.4.1.868.2.5.105.1.4.1.1.2 | IEEE8021PriorityValue | RC | |
column · IEEE8021PriorityValue · read-create · current The priority to be inserted as PCP bits in TAG (if any). | ||||
| CtnEthSoamAPSCfgCast | 1.3.6.1.4.1.868.2.5.105.1.4.1.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Selection of APS PDU transmitted unicast or multi-cast. The unicast MAC will be taken from the 'Unicast Peer MAC' configuration. Unicast is only valid for L-APS - see 'Type'. The R-APS PDU is always transmitted with multi-cast MAC described in G.8032.
| ||||
| CtnEthSoamAPSCfgType | 1.3.6.1.4.1.868.2.5.105.1.4.1.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current R-APS: APS PDU is transmitted as R-APS - this is for ERPS. L-APS: APS PDU is transmitted as L-APS - this is for ELPS.
| ||||
| CtnEthSoamAPSCfgLastOctet | 1.3.6.1.4.1.868.2.5.105.1.4.1.1.5 | Unsigned32 (0..255) | RC | |
column · Unsigned32 (0..255) · read-create · current This is the last octet of the transmitted and expected RAPS multi-cast MAC. In G.8031 (03/2010) a RAPS multi-cast MAC is defined as 01-19-A7-00-00-XX. In current standard the value for this last octet is '01' and the usage of other values is for further study. | ||||
| NtnEthSoamClientCfgMgmt | 1.3.6.1.4.1.868.2.5.105.1.5 | |||
| TtnEthSoamClientCfgTable | 1.3.6.1.4.1.868.2.5.105.1.5.1 | NA | ||
table · not-accessible · current This table provides configuration about the Link Trace reply that provide OAM services. | ||||
| RtnEthSoamClientCfgEntry | 1.3.6.1.4.1.868.2.5.105.1.5.1.1 | NA | ||
row · not-accessible · current This entry represents configuration about the Client Configuration that provide OAM services.
| ||||
| CtnEthSoamClientCfgDomain | 1.3.6.1.4.1.868.2.5.105.1.5.1.1.1 | TnEthSoamType | RC | |
column · TnEthSoamType · read-create · current The domain of the client layer. Must be EVC. | ||||
| CtnEthSoamClientCfgLevel | 1.3.6.1.4.1.868.2.5.105.1.5.1.1.2 | Dot1agCfmMDLevel | RW | |
column · Dot1agCfmMDLevel · read-write · current Client layer level - meaning that PDU transmitted in client layer flows will be on this level. | ||||
| CtnEthSoamClientCfgFlow1 | 1.3.6.1.4.1.868.2.5.105.1.5.1.1.3 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current Client layer flow instance numbers. | ||||
| CtnEthSoamClientCfgFlow2 | 1.3.6.1.4.1.868.2.5.105.1.5.1.1.4 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current Client layer flow instance numbers. | ||||
| CtnEthSoamClientCfgFlow3 | 1.3.6.1.4.1.868.2.5.105.1.5.1.1.5 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current Client layer flow instance numbers. | ||||
| CtnEthSoamClientCfgFlow4 | 1.3.6.1.4.1.868.2.5.105.1.5.1.1.6 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current Client layer flow instance numbers. | ||||
| CtnEthSoamClientCfgFlow5 | 1.3.6.1.4.1.868.2.5.105.1.5.1.1.7 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current Client layer flow instance numbers. | ||||
| CtnEthSoamClientCfgFlow6 | 1.3.6.1.4.1.868.2.5.105.1.5.1.1.8 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current Client layer flow instance numbers. | ||||
| CtnEthSoamClientCfgFlow7 | 1.3.6.1.4.1.868.2.5.105.1.5.1.1.9 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current Client layer flow instance numbers. | ||||
| CtnEthSoamClientCfgFlow8 | 1.3.6.1.4.1.868.2.5.105.1.5.1.1.10 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current Client layer flow instance numbers. | ||||
| CtnEthSoamClientCfgFlow9 | 1.3.6.1.4.1.868.2.5.105.1.5.1.1.11 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current Client layer flow instance numbers. | ||||
| CtnEthSoamClientCfgFlow10 | 1.3.6.1.4.1.868.2.5.105.1.5.1.1.12 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current Client layer flow instance numbers. | ||||
| NtnEthSoamLocalCfgMgmt | 1.3.6.1.4.1.868.2.5.105.1.6 | |||
| TtnEthSoamLocalCfgTable | 1.3.6.1.4.1.868.2.5.105.1.6.1 | NA | ||
table · not-accessible · current This table has entries which generate a configuration for local SOAM. | ||||
| RtnEthSoamLocalCfgEntry | 1.3.6.1.4.1.868.2.5.105.1.6.1.1 | NA | ||
row · not-accessible · current A entry in the table represents a configuration for local SOAM.
| ||||
| CtnEthSoamFormat | 1.3.6.1.4.1.868.2.5.105.1.6.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current This is the configuration of the two possible Maintenance Association Identifier formats. ITU ICC: This is defined by ITU. 'ICC' can be max. 6 char. 'MEG id' can be max. 7 char. IEEE String: This is defined by IEEE. 'Domain Name' can be max. 8 char. 'MEG id' can be max. 8 char.
| ||||
| CtnEthSoamDomainName | 1.3.6.1.4.1.868.2.5.105.1.6.1.1.2 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current This is either ITU ICC (MEG ID value[1-6]) or IEEE Maintenance Domain Name - depending on 'Format'. See 'Format'. | ||||
| CtnEthSoamMegOrMaName | 1.3.6.1.4.1.868.2.5.105.1.6.1.1.3 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current This is either ITU UMC (MEG ID value[7-13]) or IEEE Short MA Name - depending on 'Format'. See 'Format'. In case of ITU ICC format this can be max. 7 char. If only 6 char. is entered the MEG ID value[13] will become NULL. | ||||
| CtnEthSoamMepID | 1.3.6.1.4.1.868.2.5.105.1.6.1.1.4 | Dot1agCfmMepId | RW | |
column · Dot1agCfmMepId · read-write · current This value will become the transmitted two byte CCM MEP ID. | ||||
| CtnEthSoamCcmInterval | 1.3.6.1.4.1.868.2.5.105.1.6.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Interval between CCM transmissions to be used by all MEPs in the MA.
| ||||
| CtnEthSoamEVCQos | 1.3.6.1.4.1.868.2.5.105.1.6.1.1.6 | INTEGER (0..7) | RW | |
column · INTEGER (0..7) · read-write · current This is only relevant for a EVC MEP. This is the Qos of the EVC used for getting QoS counters for Loss Measurement. | ||||
| CtnEthSoamEVCPolicyID | 1.3.6.1.4.1.868.2.5.105.1.6.1.1.7 | INTEGER (1..128) | RW | |
column · INTEGER (1..128) · read-write · current This is relevant for an EVC Egress/Up-MEP. This is the Policy number of the relevant ECE. The Policy ID that the generated TST frames will get as IS1 action. Can be the same as any ECE Policy Number, enabling it to hit the same ACL and thereby the same EVC policer. | ||||
| CtnEthSoamVOE | 1.3.6.1.4.1.868.2.5.105.1.6.1.1.8 | TruthValue | RW | |
column · TruthValue · read-write · current This will attempt to utilize VOE HW for MEP implementation. Not all platforms support VOE. | ||||
| NtnEthSoamStatusMgmt | 1.3.6.1.4.1.868.2.5.105.1.7 | |||
| TtnEthSoamStatusTable | 1.3.6.1.4.1.868.2.5.105.1.7.1 | NA | ||
table · not-accessible · current This table provides configuration about the SOAM that provide OAM services. | ||||
| RtnEthSoamStatusEntry | 1.3.6.1.4.1.868.2.5.105.1.7.1.1 | NA | ||
row · not-accessible · current This entry represents configuration about the SOAM that provide OAM services.
| ||||
| CtnEthSoamStatusCCMLevel | 1.3.6.1.4.1.868.2.5.105.1.7.1.1.1 | TruthValue | RO | |
column · TruthValue · read-only · current Fault Cause indicating that a CCM is received with a lower level than the configured for this MEP. | ||||
| CtnEthSoamStatusCCMMeg | 1.3.6.1.4.1.868.2.5.105.1.7.1.1.2 | TruthValue | RO | |
column · TruthValue · read-only · current Fault Cause indicating that a CCM is received with a MEG ID different from configured for this MEP. | ||||
| CtnEthSoamStatusCCMMep | 1.3.6.1.4.1.868.2.5.105.1.7.1.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current Fault Cause indicating that a CCM is received with a MEP ID different from all 'Peer MEP ID' configured for this MEP. | ||||
| CtnEthSoamStatusAIS | 1.3.6.1.4.1.868.2.5.105.1.7.1.1.4 | TruthValue | RO | |
column · TruthValue · read-only · current Fault Cause indicating that AIS PDU is received. | ||||
| CtnEthSoamStatusCLK | 1.3.6.1.4.1.868.2.5.105.1.7.1.1.5 | TruthValue | RO | |
column · TruthValue · read-only · current Fault Cause indicating that LCK PDU is received. | ||||
| CtnEthSoamStatusSSF | 1.3.6.1.4.1.868.2.5.105.1.7.1.1.6 | TruthValue | RO | |
column · TruthValue · read-only · current Fault Cause indicating that server layer is indicating Signal Fail. | ||||
| CtnEthSoamStatusBLK | 1.3.6.1.4.1.868.2.5.105.1.7.1.1.7 | TruthValue | RO | |
column · TruthValue · read-only · current The consequent action of blocking service frames in this flow is active. | ||||
| CtnEthSoamStatusTSF | 1.3.6.1.4.1.868.2.5.105.1.7.1.1.8 | TruthValue | RO | |
column · TruthValue · read-only · current The consequent action of indicating Trail Signal Fail to-wards protection is active. | ||||
| NtnEthSoamLossStateMgmt | 1.3.6.1.4.1.868.2.5.105.1.8 | |||
| TtnEthSoamLossStateTable | 1.3.6.1.4.1.868.2.5.105.1.8.1 | NA | ||
table · not-accessible · current This table has entries which generate a configuration for loss measurement State. | ||||
| RtnEthSoamLossStateEntry | 1.3.6.1.4.1.868.2.5.105.1.8.1.1 | NA | ||
row · not-accessible · current A entry in the table represents a configuration for loss measurement State.
| ||||
| CtnEthSoamLossStateTxCount | 1.3.6.1.4.1.868.2.5.105.1.8.1.1.1 | Gauge32 | RO | |
column · Gauge32 · read-only · current The accumulated Tx frame loss count. | ||||
| CtnEthSoamLossStateRxCount | 1.3.6.1.4.1.868.2.5.105.1.8.1.1.2 | Gauge32 | RO | |
column · Gauge32 · read-only · current The accumulated Rx frame loss count. | ||||
| CtnEthSoamLossStateNELossCount | 1.3.6.1.4.1.868.2.5.105.1.8.1.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current The accumulated near end frame loss count - since last 'clear'. | ||||
| CtnEthSoamLossStateFELossCount | 1.3.6.1.4.1.868.2.5.105.1.8.1.1.4 | Gauge32 | RO | |
column · Gauge32 · read-only · current The accumulated far end frame loss count - since last 'clear'. | ||||
| CtnEthSoamLossStateNELossRatio | 1.3.6.1.4.1.868.2.5.105.1.8.1.1.5 | Gauge32 | RO | |
column · Gauge32 · read-only · current The near end frame loss ratio calculated based on the near end frame loss count and far end frame transmitted - in the latest 'FLR Interval'. The result is given in percent. | ||||
| CtnEthSoamLossStateFELossRatio | 1.3.6.1.4.1.868.2.5.105.1.8.1.1.6 | Gauge32 | RO | |
column · Gauge32 · read-only · current The far end frame loss ratio calculated based on the far end frame loss count and near end frame transmitted - in the latest 'FLR Interval'. The result is given in percent. | ||||
| CtnEthSoamLossStateAction | 1.3.6.1.4.1.868.2.5.105.1.8.1.1.7 | TruthValue | RW | |
column · TruthValue · read-write · current Set of this check and save will clear the accumulated counters and restart ratio calculation. | ||||
| NtnEthSoamTSExtMgmt | 1.3.6.1.4.1.868.2.5.105.1.9 | |||
| TtnEthSoamTSExtTable | 1.3.6.1.4.1.868.2.5.105.1.9.1 | NA | ||
table · not-accessible · current This table has entries which generate a configuration for test signal. | ||||
| RtnEthSoamTSExtEntry | 1.3.6.1.4.1.868.2.5.105.1.9.1.1 | NA | ||
row · not-accessible · current A entry in the table represents a configuration for test signal.
| ||||
| CtnEthSoamTSSeqNum | 1.3.6.1.4.1.868.2.5.105.1.9.1.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current sequence number. | ||||
| CtnEthSoamTSStateRxRate | 1.3.6.1.4.1.868.2.5.105.1.9.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The current received TST frame bit rate in 100 Kbps. This is calculated on a 1 s. basis, starting when first TST frame is received after 'Clear'. The frame size used for this calculation is the first received after 'Clear' . | ||||
| CtnEthSoamTSStateAction | 1.3.6.1.4.1.868.2.5.105.1.9.1.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current This will clear all Test Signal State. Transmission of TST frame will be restarted. Calculation of 'Rx frame count', 'RX rate' and 'Test time' will be started when receiving first TST frame. | ||||
| CtnEthSoamTestCfgPattern | 1.3.6.1.4.1.868.2.5.105.1.9.1.1.4 | TnEthSoamTestPatternType | RC | |
column · TnEthSoamTestPatternType · read-create · current This attribute specifies the type of test pattern to be sent or received in an OAM PDU Test TLV. | ||||
| NtnEthSoamLtmMgmt | 1.3.6.1.4.1.868.2.5.105.1.10 | |||
| TtnEthSoamLtmTable | 1.3.6.1.4.1.868.2.5.105.1.10.1 | NA | ||
table · not-accessible · current This table provides configuration about ltm priority that provide OAM services. | ||||
| RtnEthSoamLtmEntry | 1.3.6.1.4.1.868.2.5.105.1.10.1.1 | NA | ||
row · not-accessible · current This entry represents configuration about the SOAM that provide OAM services.
| ||||
| CtnEthSoamltmPriority | 1.3.6.1.4.1.868.2.5.105.1.10.1.1.1 | IEEE8021PriorityValue | RC | |
column · IEEE8021PriorityValue · read-create · current The priority to be inserted as PCP bits in TAG (if any). | ||||
| NtnEthSoamLtrMgmt | 1.3.6.1.4.1.868.2.5.105.1.11 | |||
| TtnEthSoamLtrTable | 1.3.6.1.4.1.868.2.5.105.1.11.1 | NA | ||
table · not-accessible · current This table provides configuration about ltm priority that provide OAM services. | ||||
| RtnEthSoamLtrEntry | 1.3.6.1.4.1.868.2.5.105.1.11.1.1 | NA | ||
row · not-accessible · current This entry represents configuration about the SOAM that provide OAM services.
| ||||
| CtnEthSoamLtrDirection | 1.3.6.1.4.1.868.2.5.105.1.11.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The priority to be inserted as PCP bits in TAG (if any).
| ||||
| NtnEthSoamAisCfgMgmt | 1.3.6.1.4.1.868.2.5.105.1.12 | |||
| TtnEthSoamAisCfgTable | 1.3.6.1.4.1.868.2.5.105.1.12.1 | NA | ||
table · not-accessible · current This table provides configuration about ais that provide OAM services. | ||||
| RtnEthSoamAisCfgEntry | 1.3.6.1.4.1.868.2.5.105.1.12.1.1 | NA | ||
row · not-accessible · current This entry represents configuration about the SOAM that provide OAM services.
| ||||
| CtnEthSoamAisCfgProtection | 1.3.6.1.4.1.868.2.5.105.1.12.1.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current Selecting this means that the first 3 AIS PDU is transmitted as fast as possible - in case of using this for protection in the end point. | ||||
| NtnEthSoamDmCfgMgmt | 1.3.6.1.4.1.868.2.5.105.1.13 | |||
| TtnEthSoamDmCfgTable | 1.3.6.1.4.1.868.2.5.105.1.13.1 | NA | ||
table · not-accessible · current This table provides configuration about the Delay Measurement that provide OAM services. | ||||
| RtnEthSoamDmCfgEntry | 1.3.6.1.4.1.868.2.5.105.1.13.1.1 | NA | ||
row · not-accessible · current This entry represents configuration about the Delay Measurement that provide OAM services.
| ||||
| CtnEthSoamDmCfgEnable | 1.3.6.1.4.1.868.2.5.105.1.13.1.1.1 | TruthValue | RC | |
column · TruthValue · read-create · current Delay Measurement based on transmitting 1DM/DMM PDU can be enabled/disabled. Delay Measurement based on receiving and handling 1DM/DMR PDU is always enabled. | ||||
| CtnEthSoamDmCfgPriority | 1.3.6.1.4.1.868.2.5.105.1.13.1.1.2 | IEEE8021PriorityValue | RC | |
column · IEEE8021PriorityValue · read-create · current The priority to be inserted as PCP bits in TAG (if any). | ||||
| CtnEthSoamDmCfgCast | 1.3.6.1.4.1.868.2.5.105.1.13.1.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Selection of 1DM/DMM PDU transmitted unicast or multicast. The unicast MAC will be configured through 'Peer MEP'.
| ||||
| CtnEthSoamDmCfgPeerId | 1.3.6.1.4.1.868.2.5.105.1.13.1.1.4 | Dot1agCfmMepId | RC | |
column · Dot1agCfmMepId · read-create · current Peer MEP ID. | ||||
| CtnEthSoamDmCfgWayType | 1.3.6.1.4.1.868.2.5.105.1.13.1.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current One-Way: One-Way Delay Measurement implemented on 1DM. Two-Way: Two-Way Delay Measurement implemented on DMM/DMR.
| ||||
| CtnEthSoamDmCfgTxMode | 1.3.6.1.4.1.868.2.5.105.1.13.1.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Standardize: Y.1731 standardize way to transmit 1DM/DMR. Proprietary: Vitesse proprietary way with follow-up packets to transmit 1DM/DMR.
| ||||
| CtnEthSoamDmCfgCalc | 1.3.6.1.4.1.868.2.5.105.1.13.1.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current This is only used if the 'Way' is configured to Two-way. Round trip: The frame dealy calculated by the transmitting and receiving timestamps of initiators. Frame Delay = RxTimeb-TxTimeStampf Flow: The frame dealy calculated by the transmitting and receiving timestamps of initiators and remotes. Frame Delay = (RxTimeb-TxTimeStampf)-(TxTimeStampb-RxTimeStampf).
| ||||
| CtnEthSoamDmCfgGap | 1.3.6.1.4.1.868.2.5.105.1.13.1.1.8 | Unsigned32 (10..65535) | RC | |
column · Unsigned32 (10..65535) · read-create · current The gap between transmitting 1DM/DMM PDU in 10ms. The range is 10 to 65535. | ||||
| CtnEthSoamDmCfgCount | 1.3.6.1.4.1.868.2.5.105.1.13.1.1.9 | INTEGER (10..2000) | RC | |
column · INTEGER (10..2000) · read-create · current The number of last records to calculate. The range is 10 to 2000. | ||||
| CtnEthSoamDmCfgUnit | 1.3.6.1.4.1.868.2.5.105.1.13.1.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current The time resolution.
| ||||
| CtnEthSoamDmCfgD2forD1 | 1.3.6.1.4.1.868.2.5.105.1.13.1.1.11 | TruthValue | RC | |
column · TruthValue · read-create · current Enable to use DMM/DMR packet to calculate one-way DM. If the option is enabled, the following action will be taken. When DMR is received, two-way delay (roundtrip or flow) and both near-end-to-far-end and far-end-to-near-end one-way delay are calcualted. When DMM or 1DM is received, only far-end-to-near-end one-way delay is calculated. | ||||
| CtnEthSoamDmCfgCOAction | 1.3.6.1.4.1.868.2.5.105.1.13.1.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current The action to counter when overflow happens.
| ||||
| NtnEthSoamDmStateMgmt | 1.3.6.1.4.1.868.2.5.105.1.14 | |||
| TtnEthSoamDmStateTable | 1.3.6.1.4.1.868.2.5.105.1.14.1 | NA | ||
table · not-accessible · current This table has entries which generate a configuration for delay measurement state. | ||||
| RtnEthSoamDmStateEntry | 1.3.6.1.4.1.868.2.5.105.1.14.1.1 | NA | ||
row · not-accessible · current A entry in the table which generate a configuration for delay measurement state.
| ||||
| CtnEthSoamDmStateFNTxCount | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.1 | Gauge32 | RO | |
column · Gauge32 · read-only · current The accumulated transmit count - since last 'clear'. | ||||
| CtnEthSoamDmStateFNRxTimeout | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.2 | Gauge32 | RO | |
column · Gauge32 · read-only · current The accumulated receive timeout count for two-way only - since last 'clear'. | ||||
| CtnEthSoamDmStateFNRxCount | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current The accumulated receive count - since last 'clear'. | ||||
| CtnEthSoamDmStateFNRxError | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.4 | Gauge32 | RO | |
column · Gauge32 · read-only · current The accumulated receive error count - since last 'clear'. The frame delay is larger than 1 second(timeout). | ||||
| CtnEthSoamDmStateFNAvgTotal | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.5 | Gauge32 | RO | |
column · Gauge32 · read-only · current The average delay - since last 'clear'. The unit is microsecond. | ||||
| CtnEthSoamDmStateFNAvgLastN | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.6 | Gauge32 | RO | |
column · Gauge32 · read-only · current The average delay of the last n packets - since last 'clear'. The unit is microsecond. | ||||
| CtnEthSoamDmStateFNAvgVarTotal | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.7 | Gauge32 | RO | |
column · Gauge32 · read-only · current The average delay variation - since last 'clear'. The unit is microsecond. | ||||
| CtnEthSoamDmStateFNAvgVarLastN | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.8 | Gauge32 | RO | |
column · Gauge32 · read-only · current The average delay variation of the last n packets - since last 'clear'. The unit is microsecond. | ||||
| CtnEthSoamDmStateFNMinValue | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.9 | Gauge32 | RO | |
column · Gauge32 · read-only · current The minimum delay - since last 'clear'. The unit is microsecond. | ||||
| CtnEthSoamDmStateFNMaxValue | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.10 | Gauge32 | RO | |
column · Gauge32 · read-only · current The maximum delay - since last 'clear'. The unit is microsecond. | ||||
| CtnEthSoamDmStateFNOverFlow | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.11 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of counter overflow - since last 'clear'. | ||||
| CtnEthSoamDmStateNFTxCount | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.12 | Gauge32 | RO | |
column · Gauge32 · read-only · current The accumulated transmit count - since last 'clear'. | ||||
| CtnEthSoamDmStateNFRxTimeout | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.13 | Gauge32 | RO | |
column · Gauge32 · read-only · current The accumulated receive timeout count for two-way only - since last 'clear'. | ||||
| CtnEthSoamDmStateNFRxCount | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.14 | Gauge32 | RO | |
column · Gauge32 · read-only · current The accumulated receive count - since last 'clear'. | ||||
| CtnEthSoamDmStateNFRxError | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.15 | Gauge32 | RO | |
column · Gauge32 · read-only · current The accumulated receive error count - since last 'clear'. The frame delay is larger than 1 second(timeout). | ||||
| CtnEthSoamDmStateNFAvgTotal | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.16 | Gauge32 | RO | |
column · Gauge32 · read-only · current The average delay - since last 'clear'. The unit is microsecond. | ||||
| CtnEthSoamDmStateNFAvgLastN | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.17 | Gauge32 | RO | |
column · Gauge32 · read-only · current The average delay of the last n packets - since last 'clear'. The unit is microsecond. | ||||
| CtnEthSoamDmStateNFAvgVarTotal | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.18 | Gauge32 | RO | |
column · Gauge32 · read-only · current The average delay variation - since last 'clear'. The unit is microsecond. | ||||
| CtnEthSoamDmStateNFAvgVarLastN | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.19 | Gauge32 | RO | |
column · Gauge32 · read-only · current The average delay variation of the last n packets - since last 'clear'. The unit is microsecond. | ||||
| CtnEthSoamDmStateNFMinValue | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.20 | Gauge32 | RO | |
column · Gauge32 · read-only · current The minimum delay - since last 'clear'. The unit is microsecond. | ||||
| CtnEthSoamDmStateNFMaxValue | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.21 | Gauge32 | RO | |
column · Gauge32 · read-only · current The maximum delay - since last 'clear'. The unit is microsecond. | ||||
| CtnEthSoamDmStateNFOverFlow | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.22 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of counter overflow - since last 'clear'. | ||||
| CtnEthSoamDmStateTwoWayTxCount | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.23 | Gauge32 | RO | |
column · Gauge32 · read-only · current The accumulated transmit count - since last 'clear'. | ||||
| CtnEthSoamDmStateTwoWayRxTimeout | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.24 | Gauge32 | RO | |
column · Gauge32 · read-only · current The accumulated receive timeout count for two-way only - since last 'clear'. | ||||
| CtnEthSoamDmStateTwoWayRxCount | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.25 | Gauge32 | RO | |
column · Gauge32 · read-only · current The accumulated receive count - since last 'clear'. | ||||
| CtnEthSoamDmStateTwoWayRxError | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.26 | Gauge32 | RO | |
column · Gauge32 · read-only · current The accumulated receive error count - since last 'clear'. The frame delay is larger than 1 second(timeout). | ||||
| CtnEthSoamDmStateTwoWayAvgTotal | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.27 | Gauge32 | RO | |
column · Gauge32 · read-only · current The average delay - since last 'clear'. The unit is microsecond. | ||||
| CtnEthSoamDmStateTwoWayAvgLastN | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.28 | Gauge32 | RO | |
column · Gauge32 · read-only · current The average delay of the last n packets - since last 'clear'. The unit is microsecond. | ||||
| CtnEthSoamDmStateTwoWayAvgVarTotal | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.29 | Gauge32 | RO | |
column · Gauge32 · read-only · current The average delay variation - since last 'clear'. The unit is microsecond. | ||||
| CtnEthSoamDmStateTwoWayAvgVarLastN | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.30 | Gauge32 | RO | |
column · Gauge32 · read-only · current The average delay variation of the last n packets - since last 'clear'. The unit is microsecond. | ||||
| CtnEthSoamDmStateTwoWayMinValue | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.31 | Gauge32 | RO | |
column · Gauge32 · read-only · current The minimum delay - since last 'clear'. The unit is microsecond. | ||||
| CtnEthSoamDmStateTwoWayMaxValue | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.32 | Gauge32 | RO | |
column · Gauge32 · read-only · current The maximum delay - since last 'clear'. The unit is microsecond. | ||||
| CtnEthSoamDmStateTwoWayOverFlow | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.33 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of counter overflow - since last 'clear'. | ||||
| CtnEthSoamDmStateAction | 1.3.6.1.4.1.868.2.5.105.1.14.1.1.34 | TruthValue | RW | |
column · TruthValue · read-write · current The number of counter overflow - since last 'clear'. | ||||
| NtnEthSoamMIBConformance | 1.3.6.1.4.1.868.2.5.105.2 | |||
Textual conventions
Dot1agCfmMDLevelInteger32 (0..7)Display hint:
dInteger identifying the Maintenance Domain Level (MD Level). Higher numbers correspond to higher Maintenance Domains, those with the greatest physical reach, with the highest values for customers' CFM PDUs. Lower numbers correspond to lower Maintenance Domains, those with more limited physical reach, with the lowest values for CFM PDUs protecting single bridges or physical links.
Dot1agCfmMaintAssocNameOCTET STRING (SIZE (1..45))Denotes a generic Maintenance Association Name. It is the part of the Maintenance Association Identifier which is unique within the Maintenance Domain Name and is appended to the Maintenance Domain Name to form the Maintenance Association Identifier (MAID). A Dot1agCfmMaintAssocName value is always interpreted within the context of a Dot1agCfmMaintAssocNameType value. Every usage of the Dot1agCfmMaintAssocName textual convention is required to specify the Dot1agCfmMaintAssocNameType object that provides the context. It is suggested that the Dot1agCfmMaintAssocNameType object be logically registered before the object(s) that use the Dot1agCfmMaintAssocName textual convention, if they appear in the same logical row. The value of a Dot1agCfmMaintAssocName object must always be consistent with the value of the associated Dot1agCfmMaintAssocNameType object. Attempts to set an Dot1agCfmMaintAssocName object to a value inconsistent with the associated Dot1agCfmMaintAssocNameType must fail with an inconsistentValue error. When this textual convention is used as the syntax of an index object, there may be issues with the limit of 128 sub-identifiers specified in SMIv2, IETF STD 58. In this case, the object definition MUST include a 'SIZE' clause to limit the number of potential instance sub-identifiers; otherwise the applicable constraints MUST be stated in the appropriate conceptual row DESCRIPTION clauses, or in the surrounding documentation if there is no single DESCRIPTION clause that is appropriate.
Dot1agCfmMaintDomainNameOCTET STRING (SIZE (1..43))Denotes a generic Maintenance Domain Name. A Dot1agCfmMaintDomainName value is always interpreted within the context of a Dot1agCfmMaintDomainNameType value. Every usage of the Dot1agCfmMaintDomainName textual convention is required to specify the Dot1agCfmMaintDomainNameType object that provides the context. It is suggested that the Dot1agCfmMaintDomainNameType object be logically registered before the object(s) that use the Dot1agCfmMaintDomainName textual convention, if they appear in the same logical row. The value of a Dot1agCfmMaintDomainName object must always be consistent with the value of the associated Dot1agCfmMaintDomainNameType object. Attempts to set an Dot1agCfmMaintDomainName object to a value inconsistent with the associated Dot1agCfmMaintDomainNameType must fail with an inconsistentValue error. When this textual convention is used as the syntax of an index object, there may be issues with the limit of 128 sub-identifiers specified in SMIv2, IETF STD 58. In this case, the object definition MUST include a 'SIZE' clause to limit the number of potential instance sub-identifiers; otherwise the applicable constraints MUST be stated in the appropriate conceptual row DESCRIPTION clauses, or in the surrounding documentation if there is no single DESCRIPTION clause that is appropriate. A value of none(1) in the associated Dot1agCfmMaintDomainNameType object means that no Maintenance Domain name is present, and the contents of the Dot1agCfmMaintDomainName object are meaningless. See the DESCRIPTION of the Dot1agCfmMaintAssocNameType TEXTUAL-CONVENTION for a discussion of the length limits on the Maintenance Domain name and Maintenance Association name.
Dot1agCfmMepIdUnsigned32 (1..8191)Display hint:
dMaintenance association End Point Identifier (MEPID): A small integer, unique over a given Maintenance Association, identifying a specific MEP.
Dot1agCfmMpDirectionINTEGERdown(1)up(2)Indicates the direction in which the Maintenance association (MEP or MIP) faces on the bridge port: down(1) Sends Continuity Check Messages away from the MAC Relay Entity. up(2) Sends Continuity Check Messages towards the MAC Relay Entity.TnEthSoamTestPatternTypeINTEGERallone(2)allzero(1)onezero(3)This enumeration data type indicates the type of test pattern to be sent in an OAM PDU Test TLV. The valid enumerated values associated with this type are: All Zreo(1) pattern will be '00000000' All One(2) pattern will be '11111111' OneZero(3) pattern will be '10101010'
TnEthSoamTypeINTEGEResp(2)evc(3)mplslink(5)mplslsp(8)mplspw(7)mplstunnel(6)port(1)vlan(4)Indicates the type of the domain in which the Maintenance association.
Traps / Notifications
- tnEthSoamFaultAlarm
1.3.6.1.4.1.868.2.5.105.0.1 - tnEthSoamPeerFaultAlarm
1.3.6.1.4.1.868.2.5.105.0.2