TN-ERPS-MIB
Transition Engineering Inc.snmptranslate -m TN-ERPS-MIB -Tpsnmpwalk -v2c -c <community> -m TN-ERPS-MIB <host> 1.3.6.1.4.1.868.2.5.109.3Imports
| IEEE8021-CFM-MIB | Dot1agCfmMepId |
|---|---|
| IF-MIB | InterfaceIndex |
| Q-BRIDGE-MIB | VlanId |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| TN-PROTECTION-MIB | tnProtectionMIB |
| TRANSITION-SMI | tnProducts |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| NtnERPSMIB | 1.3.6.1.4.1.868.2.5.109.3 | |||
| NtnERPSMIBNotifications | 1.3.6.1.4.1.868.2.5.109.3.1 | |||
| !tnErpsAlarmUp | 1.3.6.1.4.1.868.2.5.109.3.1.1 | |||
notification · current A ERPS has cleared a defect condition. A notification
(fault clearance alarm) is sent to the management entity with the OID
of the ERPS that has cleared the fault.
The management entity receiving the notification can identify
the system from the network source address of the
notification, and can identify the ERPS reporting the alarm
by the indices in the OID of the variables in the notification:
tnErpsInstance - Also the index of the ERPS state table entry
(tnERPSStateTable). | ||||
| !tnErpsAlarmDown | 1.3.6.1.4.1.868.2.5.109.3.1.2 | |||
notification · current A ERPS has a persistent defect condition. A notification
(fault alarm) is sent to the management entity with the OID
of the ERPS that has detected the fault.
The management entity receiving the notification can identify
the system from the network source address of the
notification, and can identify the ERPS reporting the defect
by the indices in the OID of the variables in the notification:
tnErpsInstance - Also the index of the ERPS state table entry
(tnERPSStateTable). | ||||
| NtnERPSMgmtObjects | 1.3.6.1.4.1.868.2.5.109.3.2 | |||
| TtnERPSTable | 1.3.6.1.4.1.868.2.5.109.3.2.1 | NA | ||
table · not-accessible · current This table displays and sets current Ethernet Protection Switching configurations. | ||||
| RtnERPSEntry | 1.3.6.1.4.1.868.2.5.109.3.2.1.1 | NA | ||
row · not-accessible · current This entry represents an Ethernet Ring Protection Switching configuration.
| ||||
| CtnERPSinstance | 1.3.6.1.4.1.868.2.5.109.3.2.1.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current The ID of the ERPS. | ||||
| CtnERPSPort0 | 1.3.6.1.4.1.868.2.5.109.3.2.1.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current This will create a Port 0 of the switch in the ring. | ||||
| CtnERPSPort1 | 1.3.6.1.4.1.868.2.5.109.3.2.1.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current This will create 'Port 1' of the switch in the Ring. As interconnected sub-ring will have only one ring port, 'Port 1' is configured as '0' for interconnected sub-ring. '0' in this field indicates that no 'Port 1' is associated with this instance | ||||
| CtnERPSPort0ApsMep | 1.3.6.1.4.1.868.2.5.109.3.2.1.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current The Port 0 APS PDU handling MEP. | ||||
| CtnERPSPort1ApsMep | 1.3.6.1.4.1.868.2.5.109.3.2.1.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current The Port 1 APS PDU handling MEP. As only one APS MEP is associated with interconnected sub-ring without virtual channel, it is configured as '0' for such ring instances. '0' in this field indicates that no Port 1 APS MEP is associated with this instance. | ||||
| CtnERPSPort0SfMep | 1.3.6.1.4.1.868.2.5.109.3.2.1.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current The Port 0 Signal Fail reporting MEP. | ||||
| CtnERPSPort1SfMep | 1.3.6.1.4.1.868.2.5.109.3.2.1.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current The Port 1 Signal Fail reporting MEP. | ||||
| CtnERPSRingType | 1.3.6.1.4.1.868.2.5.109.3.2.1.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current Type of Protecting ring. It can be either major ring or sub-ring. As per G.8032v2,
they are defined as :
Major Ring: A Major ring is the Ethernet ring that is connected on two ports to
an interconnection node.
Sub Ring :A sub-ring is an Ethernet ring which is connected to (an)other Ethernet
ring(s) or network(s) through the use of a pair of interconnection nodes.
On their own, the sub-ring links do not form a closed loop.
A closed connection of traffic may be formed by the sub-ring links and
one or more links, that are controlled by (an)other Ethernet ring(s) or network(s),
between interconnection nodes
| ||||
| CtnERPSInterconnectednode | 1.3.6.1.4.1.868.2.5.109.3.2.1.1.9 | TruthValue | RC | |
column · TruthValue · read-create · current Interconnected Node indicates that the ring instance is interconnected. Click on the checkbox to configure this. 'True' indicates it is an interconnected node for this instance. 'False' indicates that the configured instance is not interconnected. | ||||
| CtnERPSVirtualChannel | 1.3.6.1.4.1.868.2.5.109.3.2.1.1.10 | TruthValue | RC | |
column · TruthValue · read-create · current Sub-rings can either have virtual channel or not on the interconnected node. 'True' indicates it is a sub-ring with virtual channel. 'False' indicates, sub-ring doesn't have virtual channel. | ||||
| CtnERPSMajorRingID | 1.3.6.1.4.1.868.2.5.109.3.2.1.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current Major ring group ID for the interconnected sub-ring. It is used to send topology change updates on major ring. If ring is major, this value is same as the protection group ID of this ring. | ||||
| CtnERPSAlarm | 1.3.6.1.4.1.868.2.5.109.3.2.1.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current There is an active alarm on the ERPS.
| ||||
| CtnERPSRowStatus | 1.3.6.1.4.1.868.2.5.109.3.2.1.1.13 | RowStatus | RC | |
column · RowStatus · read-create · current The rowstatus of the Ethernet Ring Protection Switch. | ||||
| TtnERPSConfigTable | 1.3.6.1.4.1.868.2.5.109.3.2.2 | NA | ||
table · not-accessible · current This table contains the configuration of Instance Configuration. | ||||
| RtnERPSConfigEntry | 1.3.6.1.4.1.868.2.5.109.3.2.2.1 | NA | ||
| CtnERPSConfigStatus | 1.3.6.1.4.1.868.2.5.109.3.2.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Red: This ERPS is only created and has not yet been configured - is not active. Green: This ERPS is configured - is active¡£
| ||||
| CtnERPSConfigGuardTime | 1.3.6.1.4.1.868.2.5.109.3.2.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Guard timeout value to be used to prevent ring nodes from receiving outdated R-APS messages. The period of the guard timer can be configured in 10 ms steps between 10 ms and 2 seconds, with a default value of 500 ms | ||||
| CtnERPSConfigWtrTime | 1.3.6.1.4.1.868.2.5.109.3.2.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The Wait To Restore timing value to be used in revertive switching. The period of the WTR time can be configured by the operator in 1 minute steps between 1 and 12 minutes with a default value of 5 minutes.
| ||||
| CtnERPSConfigHoldOffTime | 1.3.6.1.4.1.868.2.5.109.3.2.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The timing value to be used to make persistent check on Signal Fail before switching. The range of the hold off timer is 0 to 10 seconds in steps of 100 ms | ||||
| CtnERPSConfigVersion | 1.3.6.1.4.1.868.2.5.109.3.2.2.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Select v1 or v2 as the ERPS version to be used. For fields such as Version, OpCode, Flags, and End TLV, the values used are as defined in ITU-T Y.1731 (Version 0x01 is transmitted per
the current version of this Recommendation at the time of this publication.)
G.8032v1 supported a single ring topology and G.8032v2 supports multiple rings/ladder topology.
v1: G.8032 v1 supports a single ring topology. The v1 protocol is robust enough to work for unidirectional failure and
multiple link failure scenarios in a ring topology.
It allows mechanism to force switch (FS) or manual switch (MS) to take care of field maintenance scenario.
v2: G.8032 v2 supports multiple rings/ladder topology.
The v2 protocol also introduced other features such as Revertive/ Non-revertive mode after condition,
that is causing the switch, is cleared, Administrative commands - Forced Switch (FS),
Manual Switch (MS) for blocking a particular ring port, Flush FDB (Filtering database),
and support of multiple ERP instances on a single ring.
| ||||
| CtnERPSConfigRevertive | 1.3.6.1.4.1.868.2.5.109.3.2.2.1.6 | TruthValue | RW | |
column · TruthValue · read-write · current In Revertive mode, after the conditions causing a protection switch has cleared, the traffic channel is restored to the working transport entity, i.e., blocked on the RPL. In Non-Revertive mode, the traffic channel continues to use the RPL, if it is not failed, after a protection switch condition has cleared. | ||||
| TtnERPSRPLTable | 1.3.6.1.4.1.868.2.5.109.3.2.3 | NA | ||
table · not-accessible · current This table contains the configuration of RPL Configuration. | ||||
| RtnERPSRPLEntry | 1.3.6.1.4.1.868.2.5.109.3.2.3.1 | NA | ||
| CtnERPSRPLRole | 1.3.6.1.4.1.868.2.5.109.3.2.3.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current It can be either RPL owner or RPL Neighbour.
| ||||
| CtnERPSRPLPort | 1.3.6.1.4.1.868.2.5.109.3.2.3.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This allows to select the east port or west port as the RPL block.
| ||||
| CtnERPSRPLClear | 1.3.6.1.4.1.868.2.5.109.3.2.3.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current If the owner has to be changed, then the clear check box allows to clear the RPL owner for that ERPS ring. | ||||
| TtnERPSCommandTable | 1.3.6.1.4.1.868.2.5.109.3.2.4 | NA | ||
table · not-accessible · current This table contains the configuration of Command Configuration. | ||||
| RtnERPSCommandEntry | 1.3.6.1.4.1.868.2.5.109.3.2.4.1 | NA | ||
| CtnERPSCommand | 1.3.6.1.4.1.868.2.5.109.3.2.4.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Administrative command. A port can be administratively configured to be in either manual switch or forced switch state.
| ||||
| CtnERPSCommandPort | 1.3.6.1.4.1.868.2.5.109.3.2.4.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Port selection - Port0 or Port1 of the protection Group on which the command is applied.
| ||||
| TtnERPSStateTable | 1.3.6.1.4.1.868.2.5.109.3.2.5 | NA | ||
table · not-accessible · current This table contains the configuration of EVC control entry. | ||||
| RtnERPSStateEntry | 1.3.6.1.4.1.868.2.5.109.3.2.5.1 | NA | ||
| CtnERPSState | 1.3.6.1.4.1.868.2.5.109.3.2.5.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current ERPS state according to State Transition Tables in G.8032.
| ||||
| CtnERPSStatePort0 | 1.3.6.1.4.1.868.2.5.109.3.2.5.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current OK: State of East port is ok. SF: State of East port is Signal Fail.
| ||||
| CtnERPSStatePort1 | 1.3.6.1.4.1.868.2.5.109.3.2.5.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current OK: State of East port is ok. SF: State of East port is Signal Fail.
| ||||
| CtnERPSStateTxAps | 1.3.6.1.4.1.868.2.5.109.3.2.5.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current The transmitted APS according to State Transition Tables in G.8032. | ||||
| CtnERPSStatePort0RxAps | 1.3.6.1.4.1.868.2.5.109.3.2.5.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The received APS on Port 0 according to State Transition Tables in G.8032. | ||||
| CtnERPSStatePort1RxAps | 1.3.6.1.4.1.868.2.5.109.3.2.5.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current The received APS on Port 1 according to State Transition Tables in G.8032. | ||||
| CtnERPSStateWtrRemaining | 1.3.6.1.4.1.868.2.5.109.3.2.5.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Remaining WTR timeout in milliseconds | ||||
| CtnERPSStateRPLUnBlocked | 1.3.6.1.4.1.868.2.5.109.3.2.5.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current APS is received on the working flow.
| ||||
| CtnERPSStateNoApsReceived | 1.3.6.1.4.1.868.2.5.109.3.2.5.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current RAPS PDU is not received from the other end.
| ||||
| CtnERPSStatePort0Blockstatus | 1.3.6.1.4.1.868.2.5.109.3.2.5.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current Block status for Port 0 (Both traffic and R-APS block status). R-APS channel is never blocked on sub-rings without virtual channel.
| ||||
| CtnERPSStatePort1Blockstatus | 1.3.6.1.4.1.868.2.5.109.3.2.5.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current Block status for Port 1 (Both traffic and R-APS block status). R-APS channel is never blocked on sub-rings without virtual channel
| ||||
| CtnERPSStateFopAlarm | 1.3.6.1.4.1.868.2.5.109.3.2.5.1.12 | TruthValue | RO | |
column · TruthValue · read-only · current Failure of Protocol Defect(FOP) status. If FOP is detected, the red LED lights; otherwise the green LED lights. | ||||
| TtnERPSVlanTable | 1.3.6.1.4.1.868.2.5.109.3.2.6 | NA | ||
table · not-accessible · current This table contains the configuration of vlan Configuration. | ||||
| RtnERPSVlanEntry | 1.3.6.1.4.1.868.2.5.109.3.2.6.1 | NA | ||
| CtnERPSVlanInstance | 1.3.6.1.4.1.868.2.5.109.3.2.6.1.1 | Unsigned32 (1..63) | NA | |
column · Unsigned32 (1..63) · not-accessible · current The instance of the ERPS vlan. | ||||
| CtnERPSVlanId | 1.3.6.1.4.1.868.2.5.109.3.2.6.1.2 | VlanId | RW | |
column · VlanId · read-write · current vlan id. | ||||
| CtnERPSVlanRowStatus | 1.3.6.1.4.1.868.2.5.109.3.2.6.1.3 | RowStatus | RW | |
column · RowStatus · read-write · current row status. | ||||
| TtnERPSSubRingCfgTable | 1.3.6.1.4.1.868.2.5.109.3.2.7 | NA | ||
table · not-accessible · current This table contains the configuration of Command Configuration. | ||||
| RtnERPSSubRingCfgEntry | 1.3.6.1.4.1.868.2.5.109.3.2.7.1 | NA | ||
| CtnERPSSubRingType | 1.3.6.1.4.1.868.2.5.109.3.2.7.1.1 | DisplayString | RO | |
column · DisplayString · read-only · current erps ring type. | ||||
| CtnERPSSubRingTopologyChange | 1.3.6.1.4.1.868.2.5.109.3.2.7.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current Clicking this checkbox indicates that the topology changes in the sub-ring are propagated in the major ring. | ||||
| TtnERPSStatisticsTable | 1.3.6.1.4.1.868.2.5.109.3.2.8 | NA | ||
table · not-accessible · current This table contains the display of erps statistics. | ||||
| RtnERPSStatisticsEntry | 1.3.6.1.4.1.868.2.5.109.3.2.8.1 | NA | ||
| CtnERPSRAPSPDUReceived | 1.3.6.1.4.1.868.2.5.109.3.2.8.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current erps R-APS PDU received. | ||||
| CtnERPSRAPSPDUDropped | 1.3.6.1.4.1.868.2.5.109.3.2.8.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current erps R-APS PDU dropped. | ||||
| CtnERPSLocalSFOccurred | 1.3.6.1.4.1.868.2.5.109.3.2.8.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current erps local SF occurred. | ||||
| CtnERPSLocalSFCleared | 1.3.6.1.4.1.868.2.5.109.3.2.8.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current erps local SF cleared. | ||||
| CtnERPSRemoteSFReceived | 1.3.6.1.4.1.868.2.5.109.3.2.8.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current erps remote SF received. | ||||
| CtnERPSRemoteFSReceived | 1.3.6.1.4.1.868.2.5.109.3.2.8.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current erps remote FS received. | ||||
| CtnERPSNRMessageSent | 1.3.6.1.4.1.868.2.5.109.3.2.8.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current erps NR message sent. | ||||
| NtnERPSMIBConformance | 1.3.6.1.4.1.868.2.5.109.3.3 | |||
Traps / Notifications
- tnErpsAlarmDown
1.3.6.1.4.1.868.2.5.109.3.1.2 - tnErpsAlarmUp
1.3.6.1.4.1.868.2.5.109.3.1.1