TN-ELPS-MIB
Transition Engineering Inc.snmptranslate -m TN-ELPS-MIB -Tpsnmpwalk -v2c -c <community> -m TN-ELPS-MIB <host> 1.3.6.1.4.1.868.2.5.109.2Imports
| IEEE8021-CFM-MIB | Dot1agCfmMepId |
|---|---|
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| TN-PROTECTION-MIB | tnProtectionMIB |
| TRANSITION-SMI | tnProducts |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| NtnElpsMib | 1.3.6.1.4.1.868.2.5.109.2 | |||
| NtnElpsMibNotifications | 1.3.6.1.4.1.868.2.5.109.2.0 | |||
| !tnElpsAlarmUp | 1.3.6.1.4.1.868.2.5.109.2.0.1 | |||
notification · current A Elps has a persistent defect condition. A notification
(fault alarm) is sent to the management entity with the OID
of the Elps that has detected the fault.
The management entity receiving the notification can identify
the system from the network source address of the
notification, and can identify the ELPS reporting the defect
by the indices in the OID of the variables in the notification:
tnElpsInstance - Also the index of the EPLS state table entry
(tnElpsStateTable). | ||||
| !tnElpsAlarmDown | 1.3.6.1.4.1.868.2.5.109.2.0.2 | |||
notification · current A Elps has a persistent defect condition. A notification
(fault alarm) is sent to the management entity with the OID
of the Elps that has detected the fault.
The management entity receiving the notification can identify
the system from the network source address of the
notification, and can identify the ELPS reporting the defect
by the indices in the OID of the variables in the notification:
tnElpsInstance - Also the index of the EPLS state table entry
(tnElpsStateTable). | ||||
| NtnElpsMibObjects | 1.3.6.1.4.1.868.2.5.109.2.1 | |||
| NtnElpsCfgMgmt | 1.3.6.1.4.1.868.2.5.109.2.1.1 | |||
| TtnElpsCfgTable | 1.3.6.1.4.1.868.2.5.109.2.1.1.1 | NA | ||
table · not-accessible · current This table provides configuration of ELPS. | ||||
| RtnElpsCfgEntry | 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1 | NA | ||
row · not-accessible · current A entry in the table represents a configuration for ELPS.
| ||||
| CtnElpsInstance | 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The ID of the ELPS. | ||||
| CtnElpsDomain | 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Port: This will create a ELPS in the Port Domain. 'W/P Flow' is a Port.
| ||||
| CtnElpsArchitecture | 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Port: This will create a 1+1 ELPS. Port: This will create a 1:1 ELPS.
| ||||
| CtnElpsWFlowPortId | 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.4 | InterfaceIndex | RC | |
column · InterfaceIndex · read-create · current The working flow for the ELPS - See 'Domain' above. | ||||
| CtnElpsPFlowPortId | 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.5 | InterfaceIndex | RC | |
column · InterfaceIndex · read-create · current The protecting flow for the ELPS - See 'Domain' above. | ||||
| CtnElpsWSfMepId | 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.6 | Dot1agCfmMepId | RC | |
column · Dot1agCfmMepId · read-create · current The working Signal Fail reporting MEP. | ||||
| CtnElpsPSfMepId | 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.7 | Dot1agCfmMepId | RC | |
column · Dot1agCfmMepId · read-create · current The protecting Signal Fail reporting MEP. | ||||
| CtnElpsApsMepId | 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.8 | Dot1agCfmMepId | RC | |
column · Dot1agCfmMepId · read-create · current The APS PDU handling MEP. | ||||
| CtnElpsConfigured | 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.9 | TruthValue | RO | |
column · TruthValue · read-only · current False: This ELPS is only created and has not yet been configured - is not active. True: This ELPS is configured - is active. | ||||
| CtnElpsDirection | 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current Unidirectional: ELPS in the two ends can select traffic from different
working/protecting flow. This is only possible in case
of 1+1.
Bidirectional: ELPS in the two ends is selecting traffic from the same
working/protecting flow. This requires APS enabled.
This is mandatory for 1:1.
| ||||
| CtnElpsApsEnable | 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.11 | TruthValue | RC | |
column · TruthValue · read-create · current The Automatic Protection Switching protocol can be enabled/disabled. This is mandatory for 1:1. | ||||
| CtnElpsRevertiveEnable | 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.12 | TruthValue | RC | |
column · TruthValue · read-create · current The revertive switching to working flow can be enabled/disabled. | ||||
| CtnElpsWTRTime | 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.13 | INTEGER | RC | |
column · INTEGER · read-create · current The Wait To Restore timing value to be used in revertive switching.
| ||||
| CtnElpsHoldOffTime | 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.14 | INTEGER | RC | |
column · INTEGER · read-create · current The timing value to be used to make persistent check on Signal Fail before switching.
| ||||
| CtnElpsCmd | 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.15 | INTEGER | RC | |
column · INTEGER · read-create · current None: There is no active local command on this instance.
Clear: The active local command will be cleared.
Lock Out: This ELPS is locked to working (not active). In case of 1:N (more than one ELPS with same protecting flow) -
when one ELPS switch to protecting flow, other ELPS is enforced this command
Forced Switch: Forced switch to protecting.
Manual Switch P: Manual switch to protecting.
Manual Switch W: Manual switch to working - this is only possible in 1:1 non-revertive.
Exercise: Exercise of the protocol - not traffic effecting.
Freeze: This ELPS is locally freezed - ignoring all input.
Lock Out Local: This ELPS is locally 'locked out' - ignoring local SF detected on working.
| ||||
| CtnElpsStatus | 1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.16 | RowStatus | RC | |
column · RowStatus · read-create · current The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. | ||||
| NtnElpsStateMgmt | 1.3.6.1.4.1.868.2.5.109.2.1.2 | |||
| TtnElpsStateTable | 1.3.6.1.4.1.868.2.5.109.2.1.2.1 | NA | ||
table · not-accessible · current This table provides configuration about ELPS state | ||||
| RtnElpsStateEntry | 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1 | NA | ||
row · not-accessible · current This entry represents configuration about ELPS state
| ||||
| CtnElpsProtectionState | 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.1 | TnElpsProtSwitchState | RO | |
column · TnElpsProtSwitchState · read-only · current ELPS Protection state | ||||
| CtnElpsWFlowState | 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.2 | TnElpsDefectState | RO | |
column · TnElpsDefectState · read-only · current signalOk: State of working flow is ok signalFail: State of working flow is Signal Fail signalDegrade: State of working flow is Signal Degrade (for future use) | ||||
| CtnElpsPFlowState | 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.3 | TnElpsDefectState | RO | |
column · TnElpsDefectState · read-only · current signalOk: State of protecting flow is ok signalFail: State of protecting flow is Signal Fail signalDegrade: State of protecting flow is Signal Degrade (for future use) | ||||
| CtnElpsTransmitRequestType | 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.4 | TnElpsRequestType | RO | |
column · TnElpsRequestType · read-only · current The transmitted request type. | ||||
| CtnElpsTransmitRequestedSignal | 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The transmitted request signal. | ||||
| CtnElpsTransmitBridgedSignal | 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The transmitted bridged signal. | ||||
| CtnElpsReceiveRequestType | 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.7 | TnElpsRequestType | RO | |
column · TnElpsRequestType · read-only · current The requested type that is received from APS. | ||||
| CtnElpsReceiveRequestedSignal | 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The requested signal received from APS. | ||||
| CtnElpsReceiveBridgedSignal | 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The bridged signal received from APS . | ||||
| CtnElpsArchitectureMismatch | 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.10 | TruthValue | RO | |
column · TruthValue · read-only · current The architecture indicated in the received APS does not match the locally configured. | ||||
| CtnElpsAPSOnWorking | 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.11 | TruthValue | RO | |
column · TruthValue · read-only · current APS is received on the working flow. | ||||
| CtnElpsSwitchingIncomplete | 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.12 | TruthValue | RO | |
column · TruthValue · read-only · current Traffic is not selected from the same flow instance in the two ends. | ||||
| CtnElpsNoApsReceived | 1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.13 | TruthValue | RO | |
column · TruthValue · read-only · current APS PDU is not received from the other end. | ||||
| NtnElpsLinkOverMgmt | 1.3.6.1.4.1.868.2.5.109.2.1.3 | |||
| TtnElpsLinkOverTable | 1.3.6.1.4.1.868.2.5.109.2.1.3.1 | NA | ||
table · not-accessible · current This table provides configuration about ELPS Link Over based on the SOAM DM | ||||
| RtnElpsLinkOverEntry | 1.3.6.1.4.1.868.2.5.109.2.1.3.1.1 | NA | ||
row · not-accessible · current This entry represents configuration about ELPS Link Over
| ||||
| CtnElpsLinkOverEnabled | 1.3.6.1.4.1.868.2.5.109.2.1.3.1.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current The feature about the DM LinkOver can be enabled and disabeld. False: This feature is disabled. True: This ELPS is enabled. | ||||
| CtnElpsLinkOverDeltaValue | 1.3.6.1.4.1.868.2.5.109.2.1.3.1.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The Delta value is ranged from 6 to 120. If the value that is on one link subtract the other one is larger than the delta value, the data flow will be swithed to the link that own the better DM value. | ||||
| NtnElpsMibConformance | 1.3.6.1.4.1.868.2.5.109.2.2 | |||
Textual conventions
TnElpsDefectStateINTEGERsignalDegrade(3)signalFail(2)signalOk(1)Indicates ELPS working/protecting state.
TnElpsProtSwitchStateINTEGERdisabled(1)doNotRevert(15)exerciseP(12)exerciseW(11)forcedSwitch(5)lockout(4)manualSwitchP(9)manualSwitchW(8)noRequestP(3)noRequestW(2)reverseRequestP(14)reverseRequestW(13)signalFailP(7)signalFailW(6)waitToRestore(10)Indicates ELPS protection switch state.
TnElpsRequestTypeINTEGERdoNotRevert(2)exercise(4)forcedWwitch(9)lockoutOfProtection(11)manualSwitch(6)noRequest(1)reverseRequest(3)signalDegrade(7)signalFailForProtection(10)signalFailForWorking(8)wait2Restore(5)Indicates ELPS received/transmitted APS request type.
Traps / Notifications
- tnElpsAlarmDown
1.3.6.1.4.1.868.2.5.109.2.0.2 - tnElpsAlarmUp
1.3.6.1.4.1.868.2.5.109.2.0.1