TN-DHCP-RELAY-MIB
Transition Engineering Inc.The mib module for DHCP settings.
snmptranslate -m TN-DHCP-RELAY-MIB -Tpsnmpwalk -v2c -c <community> -m TN-DHCP-RELAY-MIB <host> 1.3.6.1.4.1.868.2.5.148Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
| TRANSITION-SMI | tnProducts |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| ItnDhcpRelayMib | 1.3.6.1.4.1.868.2.5.148 | |||
identity The mib module for DHCP settings. | ||||
| NtnDhcpRelayMibObjects | 1.3.6.1.4.1.868.2.5.148.1 | |||
| NtnDhcpRelayConfig | 1.3.6.1.4.1.868.2.5.148.1.2 | |||
| NtnDhcpRelayConfigGlobals | 1.3.6.1.4.1.868.2.5.148.1.2.1 | |||
| StnDhcpRelayConfigGlobalsMode | 1.3.6.1.4.1.868.2.5.148.1.2.1.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current Global mode of DHCP relay. true is to enable DHCP relay and false is to disable it. | ||||
| StnDhcpRelayConfigGlobalsServerIpAddress | 1.3.6.1.4.1.868.2.5.148.1.2.1.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current Server IP address. This IP address is for DHCP server where the DHCP relay will relay DHCP packets to. | ||||
| StnDhcpRelayConfigGlobalsInformationMode | 1.3.6.1.4.1.868.2.5.148.1.2.1.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates the DHCP relay information mode option operation. Possible modes are - Enabled: Enable DHCP relay information mode operation. When DHCP relay information mode operation is enabled, the agent inserts specific information (option 82) into a DHCP message when forwarding to DHCP server and removes it from a DHCP message when transferring to DHCP client. It only works when DHCP relay operation mode is enabled. Disabled: Disable DHCP relay information mode operation. | ||||
| StnDhcpRelayConfigGlobalsInformationPolicy | 1.3.6.1.4.1.868.2.5.148.1.2.1.4 | TNDhcpRelayInformationPolicyType | RW | |
scalar · TNDhcpRelayInformationPolicyType · read-write · current Indicates the DHCP relay information option policy. When DHCP relay information mode operation is enabled, if the agent receives a DHCP message that already contains relay agent information it will enforce the policy. The 'Replace' policy is invalid when relay information mode is disabled. | ||||
| NtnDhcpRelayStatus | 1.3.6.1.4.1.868.2.5.148.1.3 | |||
| NtnDhcpRelayStatusStatistics | 1.3.6.1.4.1.868.2.5.148.1.3.1 | |||
| StnDhcpRelayStatusStatisticsServerPacketsRelayed | 1.3.6.1.4.1.868.2.5.148.1.3.1.1 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Packets relayed from server to client. | ||||
| StnDhcpRelayStatusStatisticsServerPacketErrors | 1.3.6.1.4.1.868.2.5.148.1.3.1.2 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Errors sending packets to servers. | ||||
| StnDhcpRelayStatusStatisticsClientPacketsRelayed | 1.3.6.1.4.1.868.2.5.148.1.3.1.3 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Packets relayed from client to server. | ||||
| StnDhcpRelayStatusStatisticsClientPacketErrors | 1.3.6.1.4.1.868.2.5.148.1.3.1.4 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Errors sending packets to clients. | ||||
| StnDhcpRelayStatusStatisticsAgentOptionErrors | 1.3.6.1.4.1.868.2.5.148.1.3.1.5 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Number of packets forwarded without agent options because there was no room. | ||||
| StnDhcpRelayStatusStatisticsMissingAgentOption | 1.3.6.1.4.1.868.2.5.148.1.3.1.6 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Number of packets dropped because no RAI option matching our ID was found. | ||||
| StnDhcpRelayStatusStatisticsBadCircuitId | 1.3.6.1.4.1.868.2.5.148.1.3.1.7 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Circuit ID option in matching RAI option did not match any known circuit ID. | ||||
| StnDhcpRelayStatusStatisticsMissingCircuitId | 1.3.6.1.4.1.868.2.5.148.1.3.1.8 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Circuit ID option in matching RAI option was missing. | ||||
| StnDhcpRelayStatusStatisticsBadRemoteId | 1.3.6.1.4.1.868.2.5.148.1.3.1.9 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Remote ID option in matching RAI option did not match any known remote ID. | ||||
| StnDhcpRelayStatusStatisticsMissingRemoteId | 1.3.6.1.4.1.868.2.5.148.1.3.1.10 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Remote ID option in matching RAI option was missing. | ||||
| StnDhcpRelayStatusStatisticsReceiveServerPackets | 1.3.6.1.4.1.868.2.5.148.1.3.1.11 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Receive DHCP message from server. | ||||
| StnDhcpRelayStatusStatisticsReceiveClientPackets | 1.3.6.1.4.1.868.2.5.148.1.3.1.12 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Receive DHCP message from client. | ||||
| StnDhcpRelayStatusStatisticsReceiveClientAgentOption | 1.3.6.1.4.1.868.2.5.148.1.3.1.13 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Receive relay agent information option from client. | ||||
| StnDhcpRelayStatusStatisticsReplaceAgentOption | 1.3.6.1.4.1.868.2.5.148.1.3.1.14 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Replace relay agent information option. | ||||
| StnDhcpRelayStatusStatisticsKeepAgentOption | 1.3.6.1.4.1.868.2.5.148.1.3.1.15 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Keep relay agent information option. | ||||
| StnDhcpRelayStatusStatisticsDropAgentOption | 1.3.6.1.4.1.868.2.5.148.1.3.1.16 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Drop relay agent information option. | ||||
| NtnDhcpRelayControl | 1.3.6.1.4.1.868.2.5.148.1.4 | |||
| StnDhcpRelayControlClearStatistics | 1.3.6.1.4.1.868.2.5.148.1.4.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current The action to clear statistics. true is to clear the statistics data. false, then, does nothing. | ||||
| NtnDhcpRelayMibConformance | 1.3.6.1.4.1.868.2.5.148.2 | |||
| NtnDhcpRelayMibCompliances | 1.3.6.1.4.1.868.2.5.148.2.1 | |||
| MtnDhcpRelayMibCompliance | 1.3.6.1.4.1.868.2.5.148.2.1.1 | |||
compliance · current The compliance statement for the implementation. | ||||
| NtnDhcpRelayMibGroups | 1.3.6.1.4.1.868.2.5.148.2.2 | |||
| GtnDhcpRelayConfigGlobalsInfoGroup | 1.3.6.1.4.1.868.2.5.148.2.2.1 | |||
group · current A collection of objects suitable for bulk operations. | ||||
| GtnDhcpRelayStatusStatisticsInfoGroup | 1.3.6.1.4.1.868.2.5.148.2.2.2 | |||
group · current A collection of objects suitable for bulk operations.
| ||||
| GtnDhcpRelayControlInfoGroup | 1.3.6.1.4.1.868.2.5.148.2.2.3 | |||
group · current A collection of objects suitable for bulk operations. | ||||
Textual conventions
TNDhcpRelayInformationPolicyTypeINTEGERdrop(2)keep(1)replace(0)This enumeration indicates the DHCP relay information policy type.