TPLINK-POWER-OVER-ETHERNET-MIB
TP-Link Systems Inc.Private MIB for PoE module.
snmptranslate -m TPLINK-POWER-OVER-ETHERNET-MIB -Tpsnmpwalk -v2c -c <community> -m TPLINK-POWER-OVER-ETHERNET-MIB <host> 1.3.6.1.4.1.11863.6.56Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
| TPLINK-MIB | tplinkMgmt |
| TPLINK-TC-MIB | TPRowStatus |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ItplinkPowerOverEthernetMIB | 1.3.6.1.4.1.11863.6.56 | ||||||||||||||||||||
identity Private MIB for PoE module. | |||||||||||||||||||||
| NtplinkPoeMIBObjects | 1.3.6.1.4.1.11863.6.56.1 | ||||||||||||||||||||
| NtpPoeConfig | 1.3.6.1.4.1.11863.6.56.1.1 | ||||||||||||||||||||
| NtpPoeGlobal | 1.3.6.1.4.1.11863.6.56.1.1.1 | ||||||||||||||||||||
| StpSystemPowerLimit | 1.3.6.1.4.1.11863.6.56.1.1.1.1 | INTEGER (1..3200) | RW | 1500 | |||||||||||||||||
scalar · INTEGER (1..3200) · read-write · current Define max power the PoE switch supply. The unit is 0.1W. Example values from LibreNMS test devices
| |||||||||||||||||||||
| StpPowerDisconnectMethod | 1.3.6.1.4.1.11863.6.56.1.1.1.2 | INTEGER | RO | deny-lower-priority(1) | |||||||||||||||||
scalar · INTEGER · read-only · current The PoE Switch use this method to offset the power limit being exceeded and keep the switch system using power at a usable level.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| StpSystemPowerConsumption | 1.3.6.1.4.1.11863.6.56.1.1.1.3 | INTEGER (1..3200) | RO | 404 | |||||||||||||||||
scalar · INTEGER (1..3200) · read-only · current Display the PoE switch's real time system power consumption. The unit is 0.1W. Example values from LibreNMS test devices
| |||||||||||||||||||||
| StpSystemPowerRemain | 1.3.6.1.4.1.11863.6.56.1.1.1.4 | INTEGER (1..3200) | RO | 1094 | |||||||||||||||||
scalar · INTEGER (1..3200) · read-only · current Display the PoE switch's real time remaining system power. The unit is 0.1W. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NtpPoePort | 1.3.6.1.4.1.11863.6.56.1.1.2 | ||||||||||||||||||||
| TtpPoePortConfigTable | 1.3.6.1.4.1.11863.6.56.1.1.2.1 | NA | |||||||||||||||||||
table · not-accessible · current A list of PoE entries. Here you can configure the PoE feature on each port. | |||||||||||||||||||||
| RtpPoePortConfigEntry | 1.3.6.1.4.1.11863.6.56.1.1.2.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry contains of the configuration and information of poe port.
| |||||||||||||||||||||
| CtpPoePortIndex | 1.3.6.1.4.1.11863.6.56.1.1.2.1.1.1 | INTEGER | RO | 1 | |||||||||||||||||
column · INTEGER · read-only · current The port number of the Switch. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtpPoePortStatus | 1.3.6.1.4.1.11863.6.56.1.1.2.1.1.2 | INTEGER | RW | enable(1) | |||||||||||||||||
column · INTEGER · read-write · current Select to disable/enable the PoE feature for the corresponding port. If set enable, the corresponding port can supply power to the linked PD (Powered Device).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtpPoePriority | 1.3.6.1.4.1.11863.6.56.1.1.2.1.1.3 | INTEGER | RW | low(2) | |||||||||||||||||
column · INTEGER · read-write · current Cooperates with the Power Disconnected Method to decide the way to supply power to the new linked PD (Powered Device) when the surplus power is inadequate.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtpPoePowerLimit | 1.3.6.1.4.1.11863.6.56.1.1.2.1.1.4 | INTEGER (1..300) | RW | 70 | |||||||||||||||||
column · INTEGER (1..300) · read-write · current Defines the max power the corresponding port can supply.The unit is 0.1W Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtpPoePortTimeRangeName | 1.3.6.1.4.1.11863.6.56.1.1.2.1.1.5 | OCTET STRING (SIZE (0..255)) | RW | No Limit | |||||||||||||||||
column · OCTET STRING (SIZE (0..255)) · read-write · current Select time range by entering its name. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtpPoePortProfileName | 1.3.6.1.4.1.11863.6.56.1.1.2.1.1.6 | OCTET STRING (SIZE (0..255)) | RW | None | |||||||||||||||||
column · OCTET STRING (SIZE (0..255)) · read-write · current Select profile by entering its name. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtpPoePower | 1.3.6.1.4.1.11863.6.56.1.1.2.1.1.7 | INTEGER (1..300) | RO | 20 | |||||||||||||||||
column · INTEGER (1..300) · read-only · current Displays the port's real time power supply in 0.1W. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtpPoeCurrent | 1.3.6.1.4.1.11863.6.56.1.1.2.1.1.8 | INTEGER (1..1000) | RO | 39 | |||||||||||||||||
column · INTEGER (1..1000) · read-only · current Displays the port's real time current in 1mA. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtpPoeVoltage | 1.3.6.1.4.1.11863.6.56.1.1.2.1.1.9 | INTEGER (1..300) | RO | 528 | |||||||||||||||||
column · INTEGER (1..300) · read-only · current Displays the port's real time voltage in 0.1V. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtpPoeClass | 1.3.6.1.4.1.11863.6.56.1.1.2.1.1.10 | INTEGER | RO | class3(3) | |||||||||||||||||
column · INTEGER · read-only · current Displays the class the linked PD (Powered Device) belongs to.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtpPoePowerStatus | 1.3.6.1.4.1.11863.6.56.1.1.2.1.1.11 | INTEGER | RO | on(2) | |||||||||||||||||
column · INTEGER · read-only · current Displays the port's real time power status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NtpPoeProfile | 1.3.6.1.4.1.11863.6.56.1.2 | ||||||||||||||||||||
| TtpPoeProfileTable | 1.3.6.1.4.1.11863.6.56.1.2.1 | NA | |||||||||||||||||||
table · not-accessible · current A list of PoE profile entries. Here you can define the PoE profile. | |||||||||||||||||||||
| RtpPoeProfileEntry | 1.3.6.1.4.1.11863.6.56.1.2.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry contains of the information of PoE profile.
| |||||||||||||||||||||
| CtpPoeProfileIndex | 1.3.6.1.4.1.11863.6.56.1.2.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The index number of the Switch. | |||||||||||||||||||||
| CtpPoeProfileName | 1.3.6.1.4.1.11863.6.56.1.2.1.1.2 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current the name of PoE profile. | |||||||||||||||||||||
| CtpPoeProfilePortStatus | 1.3.6.1.4.1.11863.6.56.1.2.1.1.3 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current Select to disable/enable the PoE feature for the corresponding profile. If set enable, the port selected the profile can supply power to the linked PD (Powered Device).
| |||||||||||||||||||||
| CtpPoeProfilePriority | 1.3.6.1.4.1.11863.6.56.1.2.1.1.4 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current Cooperates with the Power Disconnected Method to decide the way to supply power to the new linked PD (Powered Device) when the surplus power is inadequate.
| |||||||||||||||||||||
| CtpPoeProfilePowerLimit | 1.3.6.1.4.1.11863.6.56.1.2.1.1.5 | INTEGER (1..300) | RC | ||||||||||||||||||
column · INTEGER (1..300) · read-create · current Defines the max power the corresponding port can supply.The unit is 0.1W. | |||||||||||||||||||||
| CtpPoeProfileStatus | 1.3.6.1.4.1.11863.6.56.1.2.1.1.6 | TPRowStatus | RC | ||||||||||||||||||
| NtpPoeRecovery | 1.3.6.1.4.1.11863.6.56.1.3 | ||||||||||||||||||||
| NtpPoeRecoveryGlobal | 1.3.6.1.4.1.11863.6.56.1.3.1 | ||||||||||||||||||||
| StpPoeRecoveryGlobalStatus | 1.3.6.1.4.1.11863.6.56.1.3.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable the PoE Auto Recovery function.
| |||||||||||||||||||||
| NtpPoeRecoveryPort defined twice | 1.3.6.1.4.1.11863.6.56.1.3.2 | ||||||||||||||||||||
node The port number of the Switch. | |||||||||||||||||||||
| TtpPoeRecoveryPortTable | 1.3.6.1.4.1.11863.6.56.1.3.2.1 | NA | |||||||||||||||||||
table · not-accessible · current A list of PoE Auto Recovery entries. Here you can configure the PoE Auto Recovery feature on each port. | |||||||||||||||||||||
| RtpPoeRecoveryPortEntry | 1.3.6.1.4.1.11863.6.56.1.3.2.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry contains of the poe auto recovery configuration and information of poe port.
| |||||||||||||||||||||
| StpPoeRecoveryPort defined twice | 1.3.6.1.4.1.11863.6.56.1.3.2.1.1.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The port number of the Switch. | |||||||||||||||||||||
| CtpPoeRecoveryIp | 1.3.6.1.4.1.11863.6.56.1.3.2.1.1.2 | OCTET STRING (SIZE (0..255)) | RW | ||||||||||||||||||
column · OCTET STRING (SIZE (0..255)) · read-write · current Defines the ping IP address for the corresponding port. (Format: x.x.x.x) | |||||||||||||||||||||
| CtpPoeRecoveryStartup | 1.3.6.1.4.1.11863.6.56.1.3.2.1.1.3 | INTEGER (30..600) | RW | ||||||||||||||||||
column · INTEGER (30..600) · read-write · current Defines the startup delay for the corresponding port.(30-600 Seconds) | |||||||||||||||||||||
| CtpPoeRecoveryInterval | 1.3.6.1.4.1.11863.6.56.1.3.2.1.1.4 | INTEGER (10..120) | RW | ||||||||||||||||||
column · INTEGER (10..120) · read-write · current Defines the ping interval for the corresponding port. (10-120 Seconds) | |||||||||||||||||||||
| CtpPoeRecoveryRetry | 1.3.6.1.4.1.11863.6.56.1.3.2.1.1.5 | INTEGER (1..10) | RW | ||||||||||||||||||
column · INTEGER (1..10) · read-write · current Defines the ping failure threshold for the corresponding port. (1-10) | |||||||||||||||||||||
| CtpPoeRecoveryBreak | 1.3.6.1.4.1.11863.6.56.1.3.2.1.1.6 | INTEGER (3..120) | RW | ||||||||||||||||||
column · INTEGER (3..120) · read-write · current Defines the break time for the corresponding port. (3-120 Seconds) | |||||||||||||||||||||
| CtpPoeRecoveryStatus | 1.3.6.1.4.1.11863.6.56.1.3.2.1.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Select to disable/enable the PoE Auto Recovery feature for the corresponding port.
| |||||||||||||||||||||
| CtpPoeRecoveryFailure | 1.3.6.1.4.1.11863.6.56.1.3.2.1.1.8 | INTEGER (1..9999) | RO | ||||||||||||||||||
column · INTEGER (1..9999) · read-only · current Displays the port's ping failures. | |||||||||||||||||||||
| CtpPoeRecoveryRestart | 1.3.6.1.4.1.11863.6.56.1.3.2.1.1.9 | INTEGER (1..9999) | RO | ||||||||||||||||||
column · INTEGER (1..9999) · read-only · current Displays the port's restarts. | |||||||||||||||||||||
| CtpPoeRecoveryTotal | 1.3.6.1.4.1.11863.6.56.1.3.2.1.1.10 | INTEGER (1..9999) | RO | ||||||||||||||||||
column · INTEGER (1..9999) · read-only · current Displays the port's total pings. | |||||||||||||||||||||
| NtpPoeExtend | 1.3.6.1.4.1.11863.6.56.1.4 | ||||||||||||||||||||
| NtpPoeExtendPort defined twice | 1.3.6.1.4.1.11863.6.56.1.4.1 | ||||||||||||||||||||
node The port number of the Switch. | |||||||||||||||||||||
| TtpPoeExtendPortTable | 1.3.6.1.4.1.11863.6.56.1.4.1.1 | NA | |||||||||||||||||||
table · not-accessible · current A list of PoE Extend Mode entries. Here you can configure the PoE Extend Mode feature on each port. | |||||||||||||||||||||
| RtpPoeExtendPortEntry | 1.3.6.1.4.1.11863.6.56.1.4.1.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry contains of the poe extend mode configuration and information of poe port.
| |||||||||||||||||||||
| StpPoeExtendPort defined twice | 1.3.6.1.4.1.11863.6.56.1.4.1.1.1.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The port number of the Switch. | |||||||||||||||||||||
| CtpPoeExtendStatus | 1.3.6.1.4.1.11863.6.56.1.4.1.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Select to disable/enable the PoE Extend Mode feature for the corresponding port.
| |||||||||||||||||||||
| NtplinkPoeNotifications | 1.3.6.1.4.1.11863.6.56.2 | ||||||||||||||||||||
| !tpPoePortPowerChange | 1.3.6.1.4.1.11863.6.56.2.1 | ||||||||||||||||||||
notification · current A poePortPowerChange notification is sent when the status of a port power changes.
| |||||||||||||||||||||
| !tpPoePortPowerOverLoading | 1.3.6.1.4.1.11863.6.56.2.2 | ||||||||||||||||||||
notification · current A poePortPowerOverLoading notification is sent when a port is over loading.
| |||||||||||||||||||||
| !tpPoePortShortCircuit | 1.3.6.1.4.1.11863.6.56.2.3 | ||||||||||||||||||||
notification · current A poePortShortCircuit notification is sent when short circuit occurs on a port.
| |||||||||||||||||||||
| !tpPoePortPowerOver30Watts | 1.3.6.1.4.1.11863.6.56.2.4 | ||||||||||||||||||||
notification · current A poePortPowerOver30Watts notification is sent when a port's consumption is over 30W.
| |||||||||||||||||||||
| !tpPoePortPowerDeny | 1.3.6.1.4.1.11863.6.56.2.5 | ||||||||||||||||||||
notification · current A poePowerDeny notification is sent when a port's power supply is denied.
| |||||||||||||||||||||
| !tpPoeThermalShutdown | 1.3.6.1.4.1.11863.6.56.2.6 | ||||||||||||||||||||
notification · current A poeThermalShutdown notification is sent when the power supply shutdown occurs because temperature is too high.
| |||||||||||||||||||||
| !tpPoeOverMaxPowerBudget | 1.3.6.1.4.1.11863.6.56.2.7 | ||||||||||||||||||||
notification · current A poeOverMaxPowerBudget notification is sent when the total power is over the budget.
| |||||||||||||||||||||
Traps / Notifications
- tpPoeOverMaxPowerBudget
1.3.6.1.4.1.11863.6.56.2.7 - tpPoePortPowerChange
1.3.6.1.4.1.11863.6.56.2.1 - tpPoePortPowerDeny
1.3.6.1.4.1.11863.6.56.2.5 - tpPoePortPowerOver30Watts
1.3.6.1.4.1.11863.6.56.2.4 - tpPoePortPowerOverLoading
1.3.6.1.4.1.11863.6.56.2.2 - tpPoePortShortCircuit
1.3.6.1.4.1.11863.6.56.2.3 - tpPoeThermalShutdown
1.3.6.1.4.1.11863.6.56.2.6