TPLINK-DDMRXPOWTHRESHOLD-MIB
TP-Link Systems Inc.The config of DDM Rx Power threshold.
snmptranslate -m TPLINK-DDMRXPOWTHRESHOLD-MIB -Tpsnmpwalk -v2c -c <community> -m TPLINK-DDMRXPOWTHRESHOLD-MIB <host> 1.3.6.1.4.1.11863.6.96.1.6Imports
| IF-MIB | ifIndex |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
| TPLINK-DDMMANAGE-MIB | tplinkDdmManageMIBObjects |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IddmRxPowThreshold | 1.3.6.1.4.1.11863.6.96.1.6 | ||||||||||||||||||||
identity The config of DDM Rx Power threshold. | |||||||||||||||||||||
| TddmRxPowThresholdTable | 1.3.6.1.4.1.11863.6.96.1.6.1 | NA | |||||||||||||||||||
table · not-accessible · current A table that is used to configure the DDM Rx Power Threshold for specific ports on the Switch. | |||||||||||||||||||||
| RddmRxPowThresholdEntry | 1.3.6.1.4.1.11863.6.96.1.6.1.1 | NA | |||||||||||||||||||
| CddmRxPowThresholdPort | 1.3.6.1.4.1.11863.6.96.1.6.1.1.1 | DisplayString (SIZE (0..255)) | RO | 1/0/25 | |||||||||||||||||
column · DisplayString (SIZE (0..255)) · read-only · current This object indicates the port number. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CddmRxPowThresholdHighAlarm | 1.3.6.1.4.1.11863.6.96.1.6.1.1.2 | OCTET STRING (SIZE (0..30)) | RW | 1.000000 | |||||||||||||||||
column · OCTET STRING (SIZE (0..30)) · read-write · current This object indicates the highest threshold for the alarm. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CddmRxPowThresholdLowAlarm | 1.3.6.1.4.1.11863.6.96.1.6.1.1.3 | OCTET STRING (SIZE (0..30)) | RW | 0.001400 | |||||||||||||||||
column · OCTET STRING (SIZE (0..30)) · read-write · current This object indicates the lowest threshold for the alarm. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CddmRxPowThresholdHighWarn | 1.3.6.1.4.1.11863.6.96.1.6.1.1.4 | OCTET STRING (SIZE (0..30)) | RW | 0.794300 | |||||||||||||||||
column · OCTET STRING (SIZE (0..30)) · read-write · current This object indicates the highest threshold for the warning. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CddmRxPowThresholdLowWarn | 1.3.6.1.4.1.11863.6.96.1.6.1.1.5 | OCTET STRING (SIZE (0..30)) | RW | 0.002000 | |||||||||||||||||
column · OCTET STRING (SIZE (0..30)) · read-write · current This object indicates the lowest threshold for the warning. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CddmRxPowThresholdPortLAG | 1.3.6.1.4.1.11863.6.96.1.6.1.1.6 | OCTET STRING (SIZE (0..30)) | RO | LAG1 | |||||||||||||||||
column · OCTET STRING (SIZE (0..30)) · read-only · current This object indicates the lag number of the port. Example values from LibreNMS test devices
| |||||||||||||||||||||