TELESTE-LUMINATO-MIB
Teleste Corporationsnmptranslate -m TELESTE-LUMINATO-MIB -Tpsnmpwalk -v2c -c <community> -m TELESTE-LUMINATO-MIB <host> 1.3.6.1.4.1.3715.17.1Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
| TELESTE-ROOT-MIB | luminato |
| UCD-SNMP-MIB | Float |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ngeneral | 1.3.6.1.4.1.3715.17.1 | ||||||||||||||||||||
| SdeviceName | 1.3.6.1.4.1.3715.17.1.1 | DisplayString | RW | Luminato | |||||||||||||||||
scalar · DisplayString · read-write · current The identification name ('aliasname') of the deviceExample values from LibreNMS test devices
| |||||||||||||||||||||
| SgeneralStatus | 1.3.6.1.4.1.3715.17.1.2 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current General status of device
| |||||||||||||||||||||
| SredundancyStatus | 1.3.6.1.4.1.3715.17.1.3 | INTEGER | RO | optional | |||||||||||||||||
scalar · INTEGER · read-only · optional Status of device in 1+1 backup operation mode
| |||||||||||||||||||||
| ShwSerialNumber | 1.3.6.1.4.1.3715.17.1.10 | DisplayString | RO | HK01672034 | |||||||||||||||||
scalar · DisplayString · read-only · current Device serial number Example values from LibreNMS test devices
| |||||||||||||||||||||
| ShwType | 1.3.6.1.4.1.3715.17.1.11 | DisplayString | RO | LMC-A | |||||||||||||||||
scalar · DisplayString · read-only · current The hardware type name of the device Example values from LibreNMS test devices
| |||||||||||||||||||||
| ShwVersion | 1.3.6.1.4.1.3715.17.1.12 | DisplayString | RO | B13 | |||||||||||||||||
scalar · DisplayString · read-only · current Device hardware version Example values from LibreNMS test devices
| |||||||||||||||||||||
| SswVersion | 1.3.6.1.4.1.3715.17.1.13 | DisplayString | RO | 20.8.23 | |||||||||||||||||
scalar · DisplayString · read-only · current Device running software version Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupTime | 1.3.6.1.4.1.3715.17.1.14 | TimeTicks | RO | 242973613 (28d 2h 55m 36s) | |||||||||||||||||
scalar · TimeTicks · read-only · current Device uptime Example values from LibreNMS test devices
| |||||||||||||||||||||
| ScumulativeUptime | 1.3.6.1.4.1.3715.17.1.15 | TimeTicks | RO | 4247352204 (491d 14h 12m 2s) | |||||||||||||||||
scalar · TimeTicks · read-only · current Device cummulative uptime Example values from LibreNMS test devices
| |||||||||||||||||||||
| NstatusCode | 1.3.6.1.4.1.3715.17.2 | ||||||||||||||||||||
| TinterfaceTypeTable | 1.3.6.1.4.1.3715.17.2.1 | NA | |||||||||||||||||||
table · not-accessible · current InterfaceTypeTable lists possible interface types in the system. | |||||||||||||||||||||
| RinterfaceTypeEntry | 1.3.6.1.4.1.3715.17.2.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Each InterfaceTypeEntry describes type of the interface.
| |||||||||||||||||||||
| CinterfaceTypeId | 1.3.6.1.4.1.3715.17.2.1.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current Interfacetype Id has two values input(1) and output(2). Values are used in other tables as index.
| |||||||||||||||||||||
| TstatusCodeDeviceTable | 1.3.6.1.4.1.3715.17.2.2 | NA | |||||||||||||||||||
table · not-accessible · current This table describes monitorable objects of the device. The objects may represents real objects or classes. The monitoring system or user shall not poll this table to detect device state. Instead - user shall wait for traps or poll currentAlarmTable(1.3.6.1.4.1.5591.1.1.2) from SCTE-HMS-PROPERTY-MIB. In this case statusCodeDeviceTable shall be used to obtains text definition of alarm. | |||||||||||||||||||||
| RstatusCodeDeviceEntry | 1.3.6.1.4.1.3715.17.2.2.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CscdObjectId | 1.3.6.1.4.1.3715.17.2.2.1.1 | Unsigned32 | RO | 6 | |||||||||||||||||
column · Unsigned32 · read-only · current Unique identifier of the monitorable object. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CscdObjectValue | 1.3.6.1.4.1.3715.17.2.2.1.2 | INTEGER | RO | 1 | |||||||||||||||||
column · INTEGER · read-only · current Value of the monitorable object. The scdObjectDescriptor tells name, scale and unit of the object. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CscdObjectDescriptor | 1.3.6.1.4.1.3715.17.2.2.1.3 | DisplayString | RO | Temperature too high | |||||||||||||||||
column · DisplayString · read-only · current Description of the monitorable object. Free text if object has two states or Format: Name, Scale, Unit, [optional text] ------------------------------------ Example 1 (Analogue object): 'MainVoltage, 0.01, V' Usage: scdObjectId:7 (example) scdObjectValue:2399 scdObjectDescriptor:'MainVoltage, 0.01, V' means Main voltage is 23.99 V ------------------------------------ Example 2 (Discrete object): 'TemperatureHigh, 1, high(2)/nominal(1), Alarm state of the temperature' Usage: scdObjectId:12 (example) scdObjectValue:2 means Temperature is in high alarm state. ------------------------------------ Example values from LibreNMS test devices
| |||||||||||||||||||||
| CscdObjectAlarmValue | 1.3.6.1.4.1.3715.17.2.2.1.4 | INTEGER | RO | 2 | |||||||||||||||||
column · INTEGER · read-only · current When the object has this value it is in the alarm state. One object id can have only one alarm state. If more alarm states exist then new associated object needs to be created. Note that alarm state value can have only discrete values. If the value is zero then there is no alarm for this object. Example: TemperatureHigh object can have values high(2) or nominal(1). Alarm monitoring for this object is triggered by setting dmObjectAlarmValue to value 2 meaning high(2). How the alarm processing is done is out of scope of this MIB. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TstatusCodeModuleTable | 1.3.6.1.4.1.3715.17.2.3 | NA | |||||||||||||||||||
table · not-accessible · current This table describes monitorable objects per module inside the device. The objects may represents real objects or classes. The monitoring system or user shall not poll this table to detect device state. Instead - user shall wait for traps or poll currentAlarmTable(1.3.6.1.4.1.5591.1.1.2) from SCTE-HMS-PROPERTY-MIB. In this case statusCodeModuleTable shall be used to obtains text definition of alarm. | |||||||||||||||||||||
| RstatusCodeModuleEntry | 1.3.6.1.4.1.3715.17.2.3.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CscmModuleId | 1.3.6.1.4.1.3715.17.2.3.1.1 | INTEGER (1..7) | RO | 1 | |||||||||||||||||
column · INTEGER (1..7) · read-only · current Module Id within the device (usually slot number). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CscmObjectId | 1.3.6.1.4.1.3715.17.2.3.1.2 | Unsigned32 | RO | 4 | |||||||||||||||||
column · Unsigned32 · read-only · current Unique identifier of the monitorable object within the module. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CscmObjectValue | 1.3.6.1.4.1.3715.17.2.3.1.3 | INTEGER | RO | 1 | |||||||||||||||||
column · INTEGER · read-only · current Value of the monitorable object. The scmObjectDescriptor tells name, scale and unit of the object. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CscmObjectDescriptor | 1.3.6.1.4.1.3715.17.2.3.1.4 | DisplayString | RO | Module 1: PID conflict | |||||||||||||||||
column · DisplayString · read-only · current Description of the monitorable object. See scdObjectDescriptor for format, example and usage. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CscmObjectAlarmValue | 1.3.6.1.4.1.3715.17.2.3.1.5 | INTEGER | RO | 2 | |||||||||||||||||
column · INTEGER · read-only · current See scdObjectAlarmValue for format, example and usage. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TstatusCodeInterfaceTable | 1.3.6.1.4.1.3715.17.2.4 | NA | |||||||||||||||||||
table · not-accessible · current This table describes monitorable objects per interface per module. The objects may represents real objects or classes. The monitoring system or user shall not poll this table to detect device state. Instead - user shall wait for traps or poll currentAlarmTable(1.3.6.1.4.1.5591.1.1.2) from SCTE-HMS-PROPERTY-MIB. In this case statusCodeInterfaceTable shall be used to obtains text definition of alarm. | |||||||||||||||||||||
| RstatusCodeInterfaceEntry | 1.3.6.1.4.1.3715.17.2.4.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CsciInterfaceId | 1.3.6.1.4.1.3715.17.2.4.1.1 | INTEGER (1..4) | RO | 1 | |||||||||||||||||
column · INTEGER (1..4) · read-only · current Unique interface Id within the module (e.g. RF connector number). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsciObjectId | 1.3.6.1.4.1.3715.17.2.4.1.2 | Unsigned32 | RO | 4097 | |||||||||||||||||
column · Unsigned32 · read-only · current Unique identifier of the monitorable object within the interface. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsciObjectValue | 1.3.6.1.4.1.3715.17.2.4.1.3 | INTEGER | RO | 1 | |||||||||||||||||
column · INTEGER · read-only · current Value of the monitorable object. The sciObjectDescriptor tells name, scale and unit of the object. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsciObjectDescriptor | 1.3.6.1.4.1.3715.17.2.4.1.4 | DisplayString | RO | Module 1: Signal missing (input 1) | |||||||||||||||||
column · DisplayString · read-only · current Description of the monitorable object. See scdObjectDescriptor for format, example and usage. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsciObjectAlarmValue | 1.3.6.1.4.1.3715.17.2.4.1.5 | INTEGER | RO | 2 | |||||||||||||||||
column · INTEGER · read-only · current See dmObjectAlarmValue for format, example and usage. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TstatusCodeTransportStreamTable | 1.3.6.1.4.1.3715.17.2.5 | NA | |||||||||||||||||||
table · not-accessible · current This table describes monitorable objects of each transport stream. The objects may represents real objects or classes. The monitoring system or user shall not poll this table to detect device state. Instead - user shall wait for traps or poll currentAlarmTable(1.3.6.1.4.1.5591.1.1.2) from SCTE-HMS-PROPERTY-MIB. In this case statusCodeTransportStreamTable shall be used to obtains text definition of alarm. | |||||||||||||||||||||
| RstatusCodeTransportStreamEntry | 1.3.6.1.4.1.3715.17.2.5.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CsctsTransportStreamId | 1.3.6.1.4.1.3715.17.2.5.1.1 | INTEGER (1..8192) | RO | ||||||||||||||||||
column · INTEGER (1..8192) · read-only · current Unique transport stream id inside the interface. | |||||||||||||||||||||
| CsctsObjectId | 1.3.6.1.4.1.3715.17.2.5.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Unique identifier of the monitorable object. | |||||||||||||||||||||
| CsctsObjectValue | 1.3.6.1.4.1.3715.17.2.5.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Value of the monitorable object. The sctsObjectDescriptor tells name, scale and unit of the object. | |||||||||||||||||||||
| CsctsObjectDescriptor | 1.3.6.1.4.1.3715.17.2.5.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Description of the monitorable object. See dmObjectDescriptor for format, example and usage. | |||||||||||||||||||||
| CsctsObjectAlarmValue | 1.3.6.1.4.1.3715.17.2.5.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current See scdObjectAlarmValue for format, example and usage. | |||||||||||||||||||||
| TstatusCodeServiceTable | 1.3.6.1.4.1.3715.17.2.6 | NA | |||||||||||||||||||
table · not-accessible · current This table describes monitorable objects of each service. The objects may represents real objects or classes. The monitoring system or user shall not poll this table to detect device state. Instead - user shall wait for traps or poll currentAlarmTable(1.3.6.1.4.1.5591.1.1.2) from SCTE-HMS-PROPERTY-MIB. In this case statusCodeServiceTable shall be used to obtains text definition of alarm. | |||||||||||||||||||||
| RstatusCodeServiceEntry | 1.3.6.1.4.1.3715.17.2.6.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CscsSID | 1.3.6.1.4.1.3715.17.2.6.1.1 | INTEGER (0..65535) | RO | ||||||||||||||||||
column · INTEGER (0..65535) · read-only · current Unique service id number inside the transport stream. | |||||||||||||||||||||
| CscsObjectId | 1.3.6.1.4.1.3715.17.2.6.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Unique identifier of the monitorable object. | |||||||||||||||||||||
| CscsObjectValue | 1.3.6.1.4.1.3715.17.2.6.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Value of the monitorable object. The scsObjectDescriptor tells name, scale and unit of the object. | |||||||||||||||||||||
| CscsObjectDescriptor | 1.3.6.1.4.1.3715.17.2.6.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Description of the monitorable object. See scdObjectDescriptor for format, example and usage. | |||||||||||||||||||||
| CscsServiceName | 1.3.6.1.4.1.3715.17.2.6.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The name of the service. | |||||||||||||||||||||
| CscsObjectAlarmValue | 1.3.6.1.4.1.3715.17.2.6.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current See scdObjectAlarmValue for format, example and usage. | |||||||||||||||||||||
| TstatusCodePidTable | 1.3.6.1.4.1.3715.17.2.7 | NA | |||||||||||||||||||
table · not-accessible · current This table lists monitorable objects of each PID. The objects may represents real objects or classes. The monitoring system or user shall not poll this table to detect device state. Instead - user shall wait for traps or poll currentAlarmTable(1.3.6.1.4.1.5591.1.1.2) from SCTE-HMS-PROPERTY-MIB. In this case statusCodePidTable shall be used to obtains text definition of alarm. | |||||||||||||||||||||
| RstatusCodePidEntry | 1.3.6.1.4.1.3715.17.2.7.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CscpPID | 1.3.6.1.4.1.3715.17.2.7.1.1 | INTEGER (0..8191) | RO | ||||||||||||||||||
column · INTEGER (0..8191) · read-only · current Unique PID value inside the transport stream. | |||||||||||||||||||||
| CscpObjectId | 1.3.6.1.4.1.3715.17.2.7.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current Unique identifier of the monitorable object. | |||||||||||||||||||||
| CscpObjectValue | 1.3.6.1.4.1.3715.17.2.7.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Value of the monitorable object. The scpObjectDescriptor tells name, scale and unit of the object. | |||||||||||||||||||||
| CscpObjectDescriptor | 1.3.6.1.4.1.3715.17.2.7.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Description of the monitorable object. See scdObjectDescriptor for format, example and usage. | |||||||||||||||||||||
| CscpObjectAlarmValue | 1.3.6.1.4.1.3715.17.2.7.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current See scdObjectAlarmValue for format, example and usage. | |||||||||||||||||||||
| Ninterface | 1.3.6.1.4.1.3715.17.3 | ||||||||||||||||||||
| TifExtTable | 1.3.6.1.4.1.3715.17.3.1 | NA | |||||||||||||||||||
| RifExtEntry | 1.3.6.1.4.1.3715.17.3.1.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CifExtIndex | 1.3.6.1.4.1.3715.17.3.1.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current A unique index for an interface. The index is of following format: SDPPVVVV, where: - S = Slot number - D = input(1) / output(2) - PP = Physical interface number - VVVV = Virtual interface number | |||||||||||||||||||||
| CifExtName | 1.3.6.1.4.1.3715.17.3.1.1.2 | DisplayString | RO | Module 1, IP input interface 1.1 | |||||||||||||||||
column · DisplayString · read-only · current Description for the interface. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifExtModule | 1.3.6.1.4.1.3715.17.3.1.1.3 | INTEGER | RO | 1 | |||||||||||||||||
column · INTEGER · read-only · current Number of the physical module or slot housing the interface. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifExtPhysInterface | 1.3.6.1.4.1.3715.17.3.1.1.4 | INTEGER | RO | 1 | |||||||||||||||||
column · INTEGER · read-only · current Physical interface number. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifExtLogiInterface | 1.3.6.1.4.1.3715.17.3.1.1.5 | INTEGER | RO | 1 | |||||||||||||||||
column · INTEGER · read-only · current Logical interface number. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifExtDirection | 1.3.6.1.4.1.3715.17.3.1.1.6 | INTEGER | RO | input(1) | |||||||||||||||||
column · INTEGER · read-only · current Direction for the data going through the interface.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpysmiFakeCol1 | 1.3.6.1.4.1.3715.17.3.1.1.4294967295 | INTEGER | NA | mandatory | |||||||||||||||||
| TsignalPhysTable | 1.3.6.1.4.1.3715.17.3.2 | NA | |||||||||||||||||||
| RsignalPhysEntry | 1.3.6.1.4.1.3715.17.3.2.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CsignalSnr | 1.3.6.1.4.1.3715.17.3.2.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Recent signal to noise ratio in 1/10th of dB. | |||||||||||||||||||||
| CsignalSnrMin | 1.3.6.1.4.1.3715.17.3.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Lowest measured SNR value since last device startup or last counter reset. | |||||||||||||||||||||
| CsignalSnrMax | 1.3.6.1.4.1.3715.17.3.2.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Highest measured SNR value since last device startup or last counter reset. | |||||||||||||||||||||
| CsignalCcErrors | 1.3.6.1.4.1.3715.17.3.2.1.5 | INTEGER | RW | 0 | |||||||||||||||||
column · INTEGER · read-write · current The number of continuity errors since last device startup or last counter reset. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsignalBer | 1.3.6.1.4.1.3715.17.3.2.1.6 | Float | RO | ||||||||||||||||||
column · Float · read-only · current Calculated bit error ratio of the signal. | |||||||||||||||||||||
| CsignalVber | 1.3.6.1.4.1.3715.17.3.2.1.7 | Float | RO | ||||||||||||||||||
column · Float · read-only · current Calculated Viterbi bit error ratio of the signal. | |||||||||||||||||||||
| TtransferTable | 1.3.6.1.4.1.3715.17.3.3 | NA | |||||||||||||||||||
| RtransferEntry | 1.3.6.1.4.1.3715.17.3.3.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CtransBitrate | 1.3.6.1.4.1.3715.17.3.3.1.2 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Recent measured bitrate of the interface in kilobits per second. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CtransBitrateMin | 1.3.6.1.4.1.3715.17.3.3.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Lowest measured bitrate since last device startup or last counter reset. Writing clears the counter. | |||||||||||||||||||||
| CtransBitrateMax | 1.3.6.1.4.1.3715.17.3.3.1.4 | INTEGER | RW | 36267882 | |||||||||||||||||
column · INTEGER · read-write · current Highest measured bitrate since last device startup or last counter reset. Writing clears the counter. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TinputServiceTable | 1.3.6.1.4.1.3715.17.3.4 | NA | |||||||||||||||||||
| RinputServiceEntry | 1.3.6.1.4.1.3715.17.3.4.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CiSID | 1.3.6.1.4.1.3715.17.3.4.1.2 | INTEGER (0..65535) | RO | ||||||||||||||||||
column · INTEGER (0..65535) · read-only · current Unique service id number inside the transport stream. | |||||||||||||||||||||
| CiServiceName | 1.3.6.1.4.1.3715.17.3.4.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The name of the service. | |||||||||||||||||||||
| CiServiceBitrate | 1.3.6.1.4.1.3715.17.3.4.1.4 | INTEGER (0..65535) | RO | ||||||||||||||||||
column · INTEGER (0..65535) · read-only · current The bitrate of service | |||||||||||||||||||||
| ToutputServiceTable | 1.3.6.1.4.1.3715.17.3.5 | NA | |||||||||||||||||||
| RoutputServiceEntry | 1.3.6.1.4.1.3715.17.3.5.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CoSID | 1.3.6.1.4.1.3715.17.3.5.1.2 | INTEGER (0..65535) | RO | ||||||||||||||||||
column · INTEGER (0..65535) · read-only · current Unique service id number inside the transport stream. | |||||||||||||||||||||
| CoServiceName | 1.3.6.1.4.1.3715.17.3.5.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The name of the service. | |||||||||||||||||||||
| CoServiceBitrate | 1.3.6.1.4.1.3715.17.3.5.1.4 | INTEGER (0..65535) | RO | ||||||||||||||||||
column · INTEGER (0..65535) · read-only · current The bitrate of service | |||||||||||||||||||||
| TproMpegFecTable | 1.3.6.1.4.1.3715.17.3.20 | NA | |||||||||||||||||||
| RproMpegFecEntry | 1.3.6.1.4.1.3715.17.3.20.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CfecValidPkts | 1.3.6.1.4.1.3715.17.3.20.1.1 | Counter32 | RW | ||||||||||||||||||
column · Counter32 · read-write · current Number of media stream packets received. Writing any value in this oid will clear all ProMpegFec related counters on the current interface. | |||||||||||||||||||||
| CfecUncorrectedPkts | 1.3.6.1.4.1.3715.17.3.20.1.2 | Counter32 | RW | ||||||||||||||||||
column · Counter32 · read-write · current Number of missing media stream packets after FEC decoding. Writing any value in this oid will clear all ProMpegFec related counters on the current interface. | |||||||||||||||||||||
| CfecCorrectedPkts | 1.3.6.1.4.1.3715.17.3.20.1.3 | Counter32 | RW | ||||||||||||||||||
column · Counter32 · read-write · current Number of corrected packets after FEC decoding. Writing any value in this oid will clear all ProMpegFec related counters on the current interface. | |||||||||||||||||||||
| CfecDuplicatePkts | 1.3.6.1.4.1.3715.17.3.20.1.4 | Counter32 | RW | ||||||||||||||||||
column · Counter32 · read-write · current Number of duplicate packets received. Defined as a received packet with the same RTP sequence number as any of the packets already in the decoding buffer. All duplicate packets are automatically discarded and do not cause missing packets or duplicates to the output stream. Writing any value in this oid will clear all ProMpegFec related counters on the current interface. | |||||||||||||||||||||
| CfecReorderedPkts | 1.3.6.1.4.1.3715.17.3.20.1.5 | Counter32 | RW | ||||||||||||||||||
column · Counter32 · read-write · current Number of reordered packets received. Defined as a received packet which RTP sequence number is smaller than the highest RTP sequence number already received, excluding duplicate packets and packets which are out of the decoding buffer range. These packets will be re-ordered and do not cause missing packets to the output stream. Writing any value in this oid will clear all ProMpegFec related counters on the current interface. | |||||||||||||||||||||
| CfecIncorrectSeqNumbers | 1.3.6.1.4.1.3715.17.3.20.1.6 | Counter32 | RW | ||||||||||||||||||
column · Counter32 · read-write · current Number of received media packets that have RTP sequence number out of decoding buffer range. All these packet are discarded. If 10 consecutive packets are out of range then decoding buffer is flushed and re-initialised i.e. all packets in the buffer are discarded. Incorrect sequence numbers counter will not be incremented if decoding buffer has been flushed. Writing any value in this oid will clear all ProMpegFec related counters on the current interface. | |||||||||||||||||||||
| CfecDiscontinuities | 1.3.6.1.4.1.3715.17.3.20.1.7 | Counter32 | RW | ||||||||||||||||||
column · Counter32 · read-write · current Number of RTP sequence number discontinuities after FEC decoding. Discontinuity is detected when the sequence number of received RTP packet (after decoding) is not equal to sequence number of previous packet. Discontinuities are typically detected when there are uncorrected packets in the stream, or when there are brief interruptions in the stream (in range of about 1-20 seconds). Also abrupt change of stream source will be counted as discontinuity because of jump in RTP sequence numbers. Writing any value in this oid will clear all ProMpegFec related counters on the current interface. | |||||||||||||||||||||
| Nnotifications | 1.3.6.1.4.1.3715.17.4 | ||||||||||||||||||||
| NstatusFlags | 1.3.6.1.4.1.3715.17.5 | ||||||||||||||||||||
| TmoduleStatusTable | 1.3.6.1.4.1.3715.17.5.2 | NA | |||||||||||||||||||
| RmoduleStatusEntry | 1.3.6.1.4.1.3715.17.5.2.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CmoduleId | 1.3.6.1.4.1.3715.17.5.2.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current Module identifier | |||||||||||||||||||||
| CmodulePidConflictStatus | 1.3.6.1.4.1.3715.17.5.2.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current PID conflict status
| |||||||||||||||||||||
| CmoduleTemperatureHigh | 1.3.6.1.4.1.3715.17.5.2.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current High temperature status
| |||||||||||||||||||||
| CmoduleTemperatureLow | 1.3.6.1.4.1.3715.17.5.2.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Low temperature status
| |||||||||||||||||||||
| CmodulePidCapaStatus | 1.3.6.1.4.1.3715.17.5.2.1.4104 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module PID capacity status
| |||||||||||||||||||||
| CmodulePsisiCaptureCapaStatus | 1.3.6.1.4.1.3715.17.5.2.1.4105 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module PSI/SI table capture capacity status
| |||||||||||||||||||||
| CmoduleSidAllocStatus | 1.3.6.1.4.1.3715.17.5.2.1.4106 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module service ID allocation capacity status
| |||||||||||||||||||||
| CmoduleCaDetectStatus | 1.3.6.1.4.1.3715.17.5.2.1.4108 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current CA module detection status
| |||||||||||||||||||||
| CmoduleDetectStatus | 1.3.6.1.4.1.3715.17.5.2.1.4111 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module detection status
| |||||||||||||||||||||
| CmoduleVoltageHigh | 1.3.6.1.4.1.3715.17.5.2.1.4112 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current High voltage status
| |||||||||||||||||||||
| CmoduleVoltageLow | 1.3.6.1.4.1.3715.17.5.2.1.4113 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Low voltage status
| |||||||||||||||||||||
| CmoduleCurrentHigh | 1.3.6.1.4.1.3715.17.5.2.1.4114 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current High current status
| |||||||||||||||||||||
| CmoduleCurrentLow | 1.3.6.1.4.1.3715.17.5.2.1.4115 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Low current status
| |||||||||||||||||||||
| CmoduleDaemonInitStatus | 1.3.6.1.4.1.3715.17.5.2.1.4127 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module daemon initialization status
| |||||||||||||||||||||
| CmoduleDriverStatus | 1.3.6.1.4.1.3715.17.5.2.1.4129 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module device driver status
| |||||||||||||||||||||
| CmoduleHwStatus | 1.3.6.1.4.1.3715.17.5.2.1.4130 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module hardware status
| |||||||||||||||||||||
| CmoduleFanStatus | 1.3.6.1.4.1.3715.17.5.2.1.4131 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Fan status
| |||||||||||||||||||||
| CmodulePowerSourceStatus | 1.3.6.1.4.1.3715.17.5.2.1.4132 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Power source status
| |||||||||||||||||||||
| CmodulePsuOverloadStatus | 1.3.6.1.4.1.3715.17.5.2.1.4133 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Power supply overload status
| |||||||||||||||||||||
| CmoduleBootupProgressStatus | 1.3.6.1.4.1.3715.17.5.2.1.4134 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module bootup progress
| |||||||||||||||||||||
| CmoduleBootupRetryStatus | 1.3.6.1.4.1.3715.17.5.2.1.4135 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module bootup retry status
| |||||||||||||||||||||
| CmoduleBootupStatus | 1.3.6.1.4.1.3715.17.5.2.1.4136 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module bootup status
| |||||||||||||||||||||
| CmoduleShutdownProgressStatus | 1.3.6.1.4.1.3715.17.5.2.1.4137 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module shutdown progress
| |||||||||||||||||||||
| CmoduleConnStatus | 1.3.6.1.4.1.3715.17.5.2.1.4138 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module connection status
| |||||||||||||||||||||
| CmoduleCompatStatus | 1.3.6.1.4.1.3715.17.5.2.1.4139 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module compatibility status
| |||||||||||||||||||||
| CmoduleUpcPowerLow | 1.3.6.1.4.1.3715.17.5.2.1.4147 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module UPC input power low status
| |||||||||||||||||||||
| CmoduleUpcPowerHigh | 1.3.6.1.4.1.3715.17.5.2.1.4148 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module UPC input power high status
| |||||||||||||||||||||
| CmoduleCalibrDataStatus | 1.3.6.1.4.1.3715.17.5.2.1.4149 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module calibration data status
| |||||||||||||||||||||
| CmoduleCalibrDataCheckStatus | 1.3.6.1.4.1.3715.17.5.2.1.4150 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module calibration data check status
| |||||||||||||||||||||
| CmoduleDescrStatus | 1.3.6.1.4.1.3715.17.5.2.1.4151 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module descrambling status
| |||||||||||||||||||||
| CmoduleBackupStatus | 1.3.6.1.4.1.3715.17.5.2.1.4153 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module backup status
| |||||||||||||||||||||
| CmoduleNitOutputsStatus | 1.3.6.1.4.1.3715.17.5.2.1.4154 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Supported Nit output module status
| |||||||||||||||||||||
| CmoduleNitSelectionStatus | 1.3.6.1.4.1.3715.17.5.2.1.4155 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Nit output selection status
| |||||||||||||||||||||
| CmoduleNitConfChangeStatus | 1.3.6.1.4.1.3715.17.5.2.1.4156 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Nit configuration change status
| |||||||||||||||||||||
| CmoduleNitDataQueryStatus | 1.3.6.1.4.1.3715.17.5.2.1.4157 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Nit data query status
| |||||||||||||||||||||
| CmoduleNitWizardStatus | 1.3.6.1.4.1.3715.17.5.2.1.4158 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Nit wizard status
| |||||||||||||||||||||
| CmoduleQamFreqStatus | 1.3.6.1.4.1.3715.17.5.2.1.4159 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current QAM output unique frequency status
| |||||||||||||||||||||
| CmoduleOutputSidStatus | 1.3.6.1.4.1.3715.17.5.2.1.4173 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module output SID status
| |||||||||||||||||||||
| CmoduleConfStatus | 1.3.6.1.4.1.3715.17.5.2.1.4175 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module configuration status
| |||||||||||||||||||||
| CmoduleFreqStatus | 1.3.6.1.4.1.3715.17.5.2.1.4176 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module frequency configuration range status
| |||||||||||||||||||||
| CmoduleOutputPowerStatus | 1.3.6.1.4.1.3715.17.5.2.1.4177 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module output power status
| |||||||||||||||||||||
| CmoduleSymrateStatus | 1.3.6.1.4.1.3715.17.5.2.1.4178 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module symbol rate configuration status
| |||||||||||||||||||||
| CmoduleChanDistStatus | 1.3.6.1.4.1.3715.17.5.2.1.4179 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module channel distance configuration status
| |||||||||||||||||||||
| CmoduleLnbVoltStatus | 1.3.6.1.4.1.3715.17.5.2.1.4180 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module LNB voltage configuration status
| |||||||||||||||||||||
| CmoduleFecRateStatus | 1.3.6.1.4.1.3715.17.5.2.1.4181 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module FEC rate configuration vs modulation status
| |||||||||||||||||||||
| CmoduleLnbCurrStatus | 1.3.6.1.4.1.3715.17.5.2.1.4182 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module LNB current status
| |||||||||||||||||||||
| CmoduleFreqOffsetStatus | 1.3.6.1.4.1.3715.17.5.2.1.4183 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module frequency offset configuration status
| |||||||||||||||||||||
| CmoduleDescrRestartStatus | 1.3.6.1.4.1.3715.17.5.2.1.4185 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module descrambling restart status
| |||||||||||||||||||||
| CmoduleCamRestartStatus | 1.3.6.1.4.1.3715.17.5.2.1.4186 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module CAM restart status
| |||||||||||||||||||||
| CmoduleEcmgStatus | 1.3.6.1.4.1.3715.17.5.2.1.4187 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Ecmg status
| |||||||||||||||||||||
| CmoduleEcmStreamStatus | 1.3.6.1.4.1.3715.17.5.2.1.4188 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Ecm stream status
| |||||||||||||||||||||
| CmoduleEmmStatus | 1.3.6.1.4.1.3715.17.5.2.1.4189 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Emm status
| |||||||||||||||||||||
| CmoduleEmmStreamStatus | 1.3.6.1.4.1.3715.17.5.2.1.4190 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Emm stream status
| |||||||||||||||||||||
| CmoduleEcmgConnStatus | 1.3.6.1.4.1.3715.17.5.2.1.4191 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Ecmg connection status
| |||||||||||||||||||||
| CmoduleEmmConnStatus | 1.3.6.1.4.1.3715.17.5.2.1.4192 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Emm connection status
| |||||||||||||||||||||
| CmoduleEcmgSpareStatus | 1.3.6.1.4.1.3715.17.5.2.1.4194 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Ecmg spare connection status
| |||||||||||||||||||||
| CmoduleBootloaderAvailStatus | 1.3.6.1.4.1.3715.17.5.2.1.4195 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module bootloader availability status
| |||||||||||||||||||||
| CmoduleBl1UpdateProgStatus | 1.3.6.1.4.1.3715.17.5.2.1.4196 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module bootloader update progress
| |||||||||||||||||||||
| CmoduleBl2UpdateProgStatus | 1.3.6.1.4.1.3715.17.5.2.1.4197 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module bootloader update progress
| |||||||||||||||||||||
| CmoduleBl1UpdateStatus | 1.3.6.1.4.1.3715.17.5.2.1.4198 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module bootloader update status
| |||||||||||||||||||||
| CmoduleBl2UpdateStatus | 1.3.6.1.4.1.3715.17.5.2.1.4199 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module bootloader update status
| |||||||||||||||||||||
| CmoduleActiveBackupStatus | 1.3.6.1.4.1.3715.17.5.2.1.4203 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Backup module status
| |||||||||||||||||||||
| CmoduleConfProgressStatus | 1.3.6.1.4.1.3715.17.5.2.1.4205 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module configuration progress
| |||||||||||||||||||||
| CmodulePresenceStatus | 1.3.6.1.4.1.3715.17.5.2.1.4206 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module presence progress
| |||||||||||||||||||||
| CmoduleProcessRestartStatus | 1.3.6.1.4.1.3715.17.5.2.1.4208 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Process restart status
| |||||||||||||||||||||
| CmoduleBackupLicenseStatus | 1.3.6.1.4.1.3715.17.5.2.1.4209 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Backup license status
| |||||||||||||||||||||
| CmodulePsisiEditorLicenseStatus | 1.3.6.1.4.1.3715.17.5.2.1.4210 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current PSI/SI editor license status
| |||||||||||||||||||||
| CmoduleMuxLicenseStatus | 1.3.6.1.4.1.3715.17.5.2.1.4211 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Multiplexing license status
| |||||||||||||||||||||
| CmoduleDemuxLicenseStatus | 1.3.6.1.4.1.3715.17.5.2.1.4212 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Demultiplexing license status
| |||||||||||||||||||||
| CmoduleDvbLicenseStatus | 1.3.6.1.4.1.3715.17.5.2.1.4213 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current DVB processing license status
| |||||||||||||||||||||
| CmoduleMsdLicenseStatus | 1.3.6.1.4.1.3715.17.5.2.1.4214 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current MSD license status
| |||||||||||||||||||||
| CmoduleDvbs2LicenseStatus | 1.3.6.1.4.1.3715.17.5.2.1.4215 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current DVB-S2 processing license status
| |||||||||||||||||||||
| CmoduleDvbt2LicenseStatus | 1.3.6.1.4.1.3715.17.5.2.1.4216 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current DVB-T2 processing license status
| |||||||||||||||||||||
| CmoduleScsLicenseStatus | 1.3.6.1.4.1.3715.17.5.2.1.4217 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Scs license status
| |||||||||||||||||||||
| CmoduleCliLoginStatus | 1.3.6.1.4.1.3715.17.5.2.1.4218 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current CLI login status
| |||||||||||||||||||||
| CmoduleRedunActivationStatus | 1.3.6.1.4.1.3715.17.5.2.1.4222 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Redundancy activation status
| |||||||||||||||||||||
| CmoduleExtioPinSignalingStatus | 1.3.6.1.4.1.3715.17.5.2.1.4223 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current EXT-IO pin status
| |||||||||||||||||||||
| CmoduleBackupPsuStatus | 1.3.6.1.4.1.3715.17.5.2.1.4224 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Backup power supply status
| |||||||||||||||||||||
| CmoduleIntrusionStatus | 1.3.6.1.4.1.3715.17.5.2.1.4225 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Intrusion detection status
| |||||||||||||||||||||
| CmoduleRedunStatus | 1.3.6.1.4.1.3715.17.5.2.1.4227 | INTEGER | RO | redundancyFailure(2) | |||||||||||||||||
column · INTEGER · read-only · current Redundancy status
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmoduleBackupHwStatus | 1.3.6.1.4.1.3715.17.5.2.1.4230 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Hardware backup support status
| |||||||||||||||||||||
| CmoduleSwUpdateProgress | 1.3.6.1.4.1.3715.17.5.2.1.4231 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Software update progress
| |||||||||||||||||||||
| CmoduleSwUpdateStatus | 1.3.6.1.4.1.3715.17.5.2.1.4233 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Software update status
| |||||||||||||||||||||
| CmoduleEitLicenseStatus | 1.3.6.1.4.1.3715.17.5.2.1.4235 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current EIT license status
| |||||||||||||||||||||
| CmoduleDescramblingStatus | 1.3.6.1.4.1.3715.17.5.2.1.4237 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Descrambling status
| |||||||||||||||||||||
| CmoduleDvbTimeStatus | 1.3.6.1.4.1.3715.17.5.2.1.4243 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current DVB time detection status
| |||||||||||||||||||||
| CmoduleTunerDcFeedStatus | 1.3.6.1.4.1.3715.17.5.2.1.4245 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Tuner DC feed current status
| |||||||||||||||||||||
| CmoduleTunerPlpSelectionReqStatus | 1.3.6.1.4.1.3715.17.5.2.1.4247 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Tuner data PLP ID requirement status
| |||||||||||||||||||||
| CmoduleTunerPlpStatus | 1.3.6.1.4.1.3715.17.5.2.1.4248 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Tuner data PLP ID validity status
| |||||||||||||||||||||
| CmoduleTunerHierarchyStatus | 1.3.6.1.4.1.3715.17.5.2.1.4249 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Status of transmission hierarchy
| |||||||||||||||||||||
| CmoduleEcmStatus | 1.3.6.1.4.1.3715.17.5.2.1.4250 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current ECM stream connection status
| |||||||||||||||||||||
| CmoduleScramConflictStatus | 1.3.6.1.4.1.3715.17.5.2.1.4251 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module scrambling shared component conflict status
| |||||||||||||||||||||
| CmoduleScramSharedStatus | 1.3.6.1.4.1.3715.17.5.2.1.4252 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Module scrambling shared component status
| |||||||||||||||||||||
| CmoduleBackupVoltageHigh | 1.3.6.1.4.1.3715.17.5.2.1.4253 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Backup high voltage status
| |||||||||||||||||||||
| CmoduleBackupVoltageLow | 1.3.6.1.4.1.3715.17.5.2.1.4254 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Backup low voltage status
| |||||||||||||||||||||
| CmoduleSdtTableStatus | 1.3.6.1.4.1.3715.17.5.2.1.4255 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Sdt table template status
| |||||||||||||||||||||
| CmoduleDescramblingRestart | 1.3.6.1.4.1.3715.17.5.2.1.4256 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Descrambling restart status
| |||||||||||||||||||||
| CmoduleCaModuleRestart | 1.3.6.1.4.1.3715.17.5.2.1.4257 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current CA module restart status
| |||||||||||||||||||||
| CmoduleCaMenuStatus | 1.3.6.1.4.1.3715.17.5.2.1.4258 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current CA menu access status
| |||||||||||||||||||||
| CmoduleInvalidCamRouting | 1.3.6.1.4.1.3715.17.5.2.1.4259 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current CAM routing status
| |||||||||||||||||||||
| CmoduleNitSidConflict | 1.3.6.1.4.1.3715.17.5.2.1.4260 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Nit / Sid conflict status
| |||||||||||||||||||||
| CmoduleLicenseMissingFEC | 1.3.6.1.4.1.3715.17.5.2.1.4262 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current FEC license status
| |||||||||||||||||||||
| CmoduleFecCorrectionStatus | 1.3.6.1.4.1.3715.17.5.2.1.4263 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Fec packet correction status. Correction overload (2) is result of too many simultaneous missing packets.
| |||||||||||||||||||||
| CmoduleFecPacketDropStatus | 1.3.6.1.4.1.3715.17.5.2.1.4264 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current FEC packet discarding status. Packet discarding (2) is resulted by too high bitrate.
| |||||||||||||||||||||
| CmoduleFecMediaPktsStatus | 1.3.6.1.4.1.3715.17.5.2.1.4265 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Fec media packet discarding status. Packet discarding (2) is resulted by too high bitrate.
| |||||||||||||||||||||
| CmoduleSfpLinkStatus | 1.3.6.1.4.1.3715.17.5.2.1.4269 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current SFP link status
| |||||||||||||||||||||
| CmoduleBackupSyncModeOff | 1.3.6.1.4.1.3715.17.5.2.1.4272 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Backup sync mode off status flag
| |||||||||||||||||||||
| CmoduleBackupSyncModeManual | 1.3.6.1.4.1.3715.17.5.2.1.4273 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Backup sync mode manual status flag
| |||||||||||||||||||||
| CmoduleBackupSyncModeAuto | 1.3.6.1.4.1.3715.17.5.2.1.4274 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Backup sync mode automatic status flag
| |||||||||||||||||||||
| CmoduleBackupSyncConfStatus | 1.3.6.1.4.1.3715.17.5.2.1.4275 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Backup sync configuration change status
| |||||||||||||||||||||
| CmoduleBackupSyncStatus | 1.3.6.1.4.1.3715.17.5.2.1.4276 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Backup configuration synchronization status
| |||||||||||||||||||||
| CmoduleBackupSyncSwCompatibility | 1.3.6.1.4.1.3715.17.5.2.1.4278 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Software version compatibility for backup sync
| |||||||||||||||||||||
| CmoduleBackupSyncHwCompatibility | 1.3.6.1.4.1.3715.17.5.2.1.4279 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Hardware version compatibility for backup sync
| |||||||||||||||||||||
| CmoduleBackupSyncConfFaultStatus | 1.3.6.1.4.1.3715.17.5.2.1.4280 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Backup sync configuration fault status
| |||||||||||||||||||||
| CmoduleBackupSyncConnectionStatus | 1.3.6.1.4.1.3715.17.5.2.1.4281 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Backup sync connection status
| |||||||||||||||||||||
| CmoduleBackupSyncFromBackupStatus | 1.3.6.1.4.1.3715.17.5.2.1.4283 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Status flag for backup autosync from backup to main
| |||||||||||||||||||||
| CmoduleBackupSyncRebootStatus | 1.3.6.1.4.1.3715.17.5.2.1.4284 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Status flag for rebooting pair device to new configuration
| |||||||||||||||||||||
| CmoduleBackupSyncLicenseCompatStatus | 1.3.6.1.4.1.3715.17.5.2.1.4285 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current License compatibility status flag for backup sync
| |||||||||||||||||||||
| CmoduleBackupSyncLicenseCompareStatus | 1.3.6.1.4.1.3715.17.5.2.1.4286 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Backup sync license comparing status
| |||||||||||||||||||||
| CmoduleDeviceFirstBootStatus | 1.3.6.1.4.1.3715.17.5.2.1.4288 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Status flag for device first boot operations
| |||||||||||||||||||||
| CmodulePartitionConfigurationBackup | 1.3.6.1.4.1.3715.17.5.2.1.4289 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Status flag for partition configuration backup operation
| |||||||||||||||||||||
| CmodulePartitionConfigurationRestore | 1.3.6.1.4.1.3715.17.5.2.1.4290 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Status flag for partition configuration restore operation
| |||||||||||||||||||||
| CmoduleSwRevertStatus | 1.3.6.1.4.1.3715.17.5.2.1.4291 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Software revertion status
| |||||||||||||||||||||
| CmoduleMaxOutputPidsStatus | 1.3.6.1.4.1.3715.17.5.2.1.4292 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Status flag for maximum number of Pid allocations
| |||||||||||||||||||||
| CmoduleUserRebootStatus | 1.3.6.1.4.1.3715.17.5.2.1.4293 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Status flag for user initiated reboot
| |||||||||||||||||||||
| CmoduleRemovalStatus | 1.3.6.1.4.1.3715.17.5.2.1.4294 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Status flag for module removal
| |||||||||||||||||||||
| CmoduleInsertionStatus | 1.3.6.1.4.1.3715.17.5.2.1.4295 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Status flag for module insertion
| |||||||||||||||||||||
| CmoduleSptsInputConfStatus | 1.3.6.1.4.1.3715.17.5.2.1.4296 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Status flag for input spts misconfiguration
| |||||||||||||||||||||
| TifStatusTable | 1.3.6.1.4.1.3715.17.5.3 | NA | |||||||||||||||||||
| RifStatusEntry | 1.3.6.1.4.1.3715.17.5.3.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CifId | 1.3.6.1.4.1.3715.17.5.3.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current Interface identifier | |||||||||||||||||||||
| CifDirection | 1.3.6.1.4.1.3715.17.5.3.1.2 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current Interface data direction
| |||||||||||||||||||||
| CifSignalStatus | 1.3.6.1.4.1.3715.17.5.3.1.4097 | INTEGER | RO | signalMissing(2) | |||||||||||||||||
column · INTEGER · read-only · current Interface signal status
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CifAsiLinkStatus | 1.3.6.1.4.1.3715.17.5.3.1.4102 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current ASI link status
| |||||||||||||||||||||
| CifLinkStatus | 1.3.6.1.4.1.3715.17.5.3.1.4226 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Interface link status
| |||||||||||||||||||||
| TtsStatusTable | 1.3.6.1.4.1.3715.17.5.4 | NA | |||||||||||||||||||
| RtsStatusEntry | 1.3.6.1.4.1.3715.17.5.4.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CtsPidRemappingStatus | 1.3.6.1.4.1.3715.17.5.4.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current TS PID remapping status
| |||||||||||||||||||||
| CtsManualTableInsertStatus | 1.3.6.1.4.1.3715.17.5.4.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current TS manual table insertion status
| |||||||||||||||||||||
| CtsPassthruDupStatus | 1.3.6.1.4.1.3715.17.5.4.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current TS output service passthrough duplication status
| |||||||||||||||||||||
| CtsSyncStatus | 1.3.6.1.4.1.3715.17.5.4.1.4098 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current TS sync status
| |||||||||||||||||||||
| CtsRxStatus | 1.3.6.1.4.1.3715.17.5.4.1.4099 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current TS Rx error status
| |||||||||||||||||||||
| CtsInputBufferStatus | 1.3.6.1.4.1.3715.17.5.4.1.4100 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current TS input buffer status
| |||||||||||||||||||||
| CtsNetworkStatus | 1.3.6.1.4.1.3715.17.5.4.1.4103 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current TS network ID status
| |||||||||||||||||||||
| CtsPsisiCapaStatus | 1.3.6.1.4.1.3715.17.5.4.1.4109 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current TS PSI/SI insertion capacity status
| |||||||||||||||||||||
| CtsMultiplexDiscardStatus | 1.3.6.1.4.1.3715.17.5.4.1.4110 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current TS multiplex packet discard status
| |||||||||||||||||||||
| CtsMultiplexDelayStatus | 1.3.6.1.4.1.3715.17.5.4.1.4228 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current TS multiplex packet delay status
| |||||||||||||||||||||
| CtsCbrOversubscriptionStatus | 1.3.6.1.4.1.3715.17.5.4.1.4229 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current TS CBR oversubscription status
| |||||||||||||||||||||
| CtsCbrDiscardStatus | 1.3.6.1.4.1.3715.17.5.4.1.4236 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current TS CBR packet discard due to oversubscription status
| |||||||||||||||||||||
| CtsIpInputCapaStatus | 1.3.6.1.4.1.3715.17.5.4.1.4238 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current TS IP input capacity status
| |||||||||||||||||||||
| CtsEitReinsertCapaStatus | 1.3.6.1.4.1.3715.17.5.4.1.4239 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current TS EIT reinsert capacity status
| |||||||||||||||||||||
| CtsSectionCapaStatus | 1.3.6.1.4.1.3715.17.5.4.1.4240 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current TS section processing capacity status
| |||||||||||||||||||||
| CtsRtpInputStatus | 1.3.6.1.4.1.3715.17.5.4.1.4241 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current TS RTP input packet droip status
| |||||||||||||||||||||
| CtsRtpSeqStatus | 1.3.6.1.4.1.3715.17.5.4.1.4242 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current TS RTP input packet sequence anomaly status
| |||||||||||||||||||||
| CtsTdtTotGenStatus | 1.3.6.1.4.1.3715.17.5.4.1.4246 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current TS output TDT/TOT table generation status
| |||||||||||||||||||||
| CtsSttGenStatus | 1.3.6.1.4.1.3715.17.5.4.1.4261 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current TS output STT table generation status
| |||||||||||||||||||||
| CtsFecPacketCorrectionStatus | 1.3.6.1.4.1.3715.17.5.4.1.4266 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Status flag for FEC correcting packets
| |||||||||||||||||||||
| CtsFecInputAnomalyStatus | 1.3.6.1.4.1.3715.17.5.4.1.4267 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Status flag for FEC input anomaly detection
| |||||||||||||||||||||
| CtsFecCorrectionCapacityStatus | 1.3.6.1.4.1.3715.17.5.4.1.4268 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Fec input packets correction capacity status
| |||||||||||||||||||||
| CtsIpMirrorOutputPacketLossStatus | 1.3.6.1.4.1.3715.17.5.4.1.4297 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Status flag for IP mirror output packet discarding
| |||||||||||||||||||||
| TserviceStatusTable | 1.3.6.1.4.1.3715.17.5.5 | NA | |||||||||||||||||||
| RserviceStatusEntry | 1.3.6.1.4.1.3715.17.5.5.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CserviceId | 1.3.6.1.4.1.3715.17.5.5.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current Service identifier | |||||||||||||||||||||
| CserviceStatus | 1.3.6.1.4.1.3715.17.5.5.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Service status
| |||||||||||||||||||||
| TpidStatusTable | 1.3.6.1.4.1.3715.17.5.6 | NA | |||||||||||||||||||
| RpidStatusEntry | 1.3.6.1.4.1.3715.17.5.6.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CpId | 1.3.6.1.4.1.3715.17.5.6.1.1 | INTEGER (1..65535) | NA | ||||||||||||||||||
column · INTEGER (1..65535) · not-accessible · current Program Identifier | |||||||||||||||||||||
| CpidStatus | 1.3.6.1.4.1.3715.17.5.6.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current PID status
| |||||||||||||||||||||