PRVT-SWITCH-IPVLAN-MIB
B.A.T.M. Advance TechnologiesThe IpVlan MIB module that controls the assignment of IP subnets to VLANs in L3 switches.
snmptranslate -m PRVT-SWITCH-IPVLAN-MIB -Tpsnmpwalk -v2c -c <community> -m PRVT-SWITCH-IPVLAN-MIB <host> 1.3.6.1.4.1.738.10.6.2Imports
| PRVT-SWITCH-MIB | ipSwitch |
|---|---|
| Q-BRIDGE-MIB | dot1qVlanIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IprvtSwitchIpVlanMIB | 1.3.6.1.4.1.738.10.6.2 | |||
identity The IpVlan MIB module that controls the assignment of IP subnets to VLANs in L3 switches. | ||||
| NipInterface | 1.3.6.1.4.1.738.10.6.2.1 | |||
| TipInterfaceTable | 1.3.6.1.4.1.738.10.6.2.1.1 | NA | ||
table · not-accessible · current This table controls the creation of IP interfaces (subnets). | ||||
| RipInterfaceEntry | 1.3.6.1.4.1.738.10.6.2.1.1.1 | NA | ||
| CipInterfaceName | 1.3.6.1.4.1.738.10.6.2.1.1.1.1 | OCTET STRING (SIZE (1..32)) | NA | |
column · OCTET STRING (SIZE (1..32)) · not-accessible · current This object identifies the name of the IP interface, serves as an index to this table. Valid names are system-dependent. Some common examples are swX, and loX, where X represents an integer from 0 to 9. | ||||
| CipInterfaceIndex | 1.3.6.1.4.1.738.10.6.2.1.1.1.2 | Integer32 (1..2147483647) | RO | |
column · Integer32 (1..2147483647) · read-only · current This object identifies the index of the IP interface. This is the same index as ifIndex from ifTable, which is also the same as ipAdEntIfIndex from MIB-II (ipAddrTable). | ||||
| CipInterfaceIpAddress | 1.3.6.1.4.1.738.10.6.2.1.1.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current This object has the value of the switch IP address in this subnet. | ||||
| CipInterfaceSubnetMask | 1.3.6.1.4.1.738.10.6.2.1.1.1.4 | IpAddress | RC | |
column · IpAddress · read-create · current This object together with ipInterfaceIpAddress forms the IP subnet, assigned to this IP interface. In the case that ipInterfaceIpAddress has the value of 0.0.0.0, this object will be ignored. | ||||
| CipInterfaceRowStatus | 1.3.6.1.4.1.738.10.6.2.1.1.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the row status, and enables the creation and deletion of rows in this table. See SNMPv2-TC for more information. | ||||
| CipInterfaceIPv6Address | 1.3.6.1.4.1.738.10.6.2.1.1.1.6 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current This object indicated the IPv6 address of the interface. | ||||
| NipVlan | 1.3.6.1.4.1.738.10.6.2.2 | |||
| TipVlanTable | 1.3.6.1.4.1.738.10.6.2.2.1 | NA | ||
table · not-accessible · current This table extends the table dot1qVlanStaticTable from Q-BRIDGE-MIB. It gives a connection between the IP Interface and the IP VLAN. | ||||
| RipVlanEntry | 1.3.6.1.4.1.738.10.6.2.2.1.1 | NA | ||
| CipVlanStatus | 1.3.6.1.4.1.738.10.6.2.2.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current This object shows the VLAN on which the interface in the index of the entry is installed and vice versa.
| ||||
| TipVlanManagementTable | 1.3.6.1.4.1.738.10.6.2.2.2 | NA | ||
table · not-accessible · current This table extends the table dot1qVlanStaticTable from Q-BRIDGE-MIB. | ||||
| RipVlanManagementEntry | 1.3.6.1.4.1.738.10.6.2.2.2.1 | NA | ||
| CipVlanManagementVlanId | 1.3.6.1.4.1.738.10.6.2.2.2.1.1 | Integer32 (1..4092) | NA | |
column · Integer32 (1..4092) · not-accessible · current Vlan id | ||||
| CipVlanManagementStatus | 1.3.6.1.4.1.738.10.6.2.2.2.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current This object shows if Vlan manageble | ||||