PRVT-SWITCH-ACCESS-LIST-MIB
B.A.T.M. Advance TechnologiesThe private MIB module that controls switch access-list parameters
snmptranslate -m PRVT-SWITCH-ACCESS-LIST-MIB -Tpsnmpwalk -v2c -c <community> -m PRVT-SWITCH-ACCESS-LIST-MIB <host> 1.3.6.1.4.1.738.10.6.1Imports
| IF-MIB | InterfaceIndex |
|---|---|
| PRVT-SERV-MIB | sapEncapValue, sapPortId, serviceId |
| PRVT-SWITCH-MIB | ipSwitch |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, internet, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IprvtSwitchAccessListMIB | 1.3.6.1.4.1.738.10.6.1 | |||
identity The private MIB module that controls switch access-list parameters | ||||
| NprvtSwAclNotifications | 1.3.6.1.4.1.738.10.6.1.0 | |||
| !prvtSwAclIfAcgApplyFailed | 1.3.6.1.4.1.738.10.6.1.0.1 | |||
notification · current Access group is not properly applied in hardware. This means that traffic will not be filtered as expected. User should either remove this access group or rearrange other access groups.
| ||||
| !prvtSwAclIfAcgRLimitApplyFailed | 1.3.6.1.4.1.738.10.6.1.0.2 | |||
notification · current Access group is not properly applied in hardware. This means that traffic will not be filtered as expected. User should either remove this access group or rearrange other access groups. | ||||
| !prvtSwAclIfAcgRedirectApplyFailed | 1.3.6.1.4.1.738.10.6.1.0.3 | |||
notification · current Access group is not properly applied in hardware. This means that traffic will not be filtered as expected. User should either remove this access group or rearrange other access groups. | ||||
| !prvtSwAclIfAcgFcApplyFailed | 1.3.6.1.4.1.738.10.6.1.0.4 | |||
notification · current Access group is not properly applied in hardware. This means that traffic will not be filtered as expected. User should either remove this access group or rearrange other access groups.
| ||||
| !prvtSwAclIfAcgMonPrfApplyFailed | 1.3.6.1.4.1.738.10.6.1.0.5 | |||
notification · current Access group is not properly applied in hardware. This means that traffic will not be filtered as expected. User should either remove this access group or rearrange other access groups. | ||||
| !prvtSwAclSapAcgApplyFailed | 1.3.6.1.4.1.738.10.6.1.0.6 | |||
notification · current Access group is not properly applied in hardware. This means that traffic will not be filtered as expected. User should either remove this access group or rearrange other access groups.
| ||||
| !prvtSwAclSapAcgRLimitApplyFailed | 1.3.6.1.4.1.738.10.6.1.0.7 | |||
notification · current Access group is not properly applied in hardware. This means that traffic will not be filtered as expected. User should either remove this access group or rearrange other access groups. | ||||
| !prvtSwAclSapAcgRedirectApplyFailed | 1.3.6.1.4.1.738.10.6.1.0.8 | |||
notification · current Access group is not properly applied in hardware. This means that traffic will not be filtered as expected. User should either remove this access group or rearrange other access groups. | ||||
| !prvtSwAclSapAcgFcApplyFailed | 1.3.6.1.4.1.738.10.6.1.0.9 | |||
notification · current Access group is not properly applied in hardware. This means that traffic will not be filtered as expected. User should either remove this access group or rearrange other access groups.
| ||||
| !prvtSwAclSapAcgMonPrfApplyFailed | 1.3.6.1.4.1.738.10.6.1.0.10 | |||
notification · current Access group is not properly applied in hardware. This means that traffic will not be filtered as expected. User should either remove this access group or rearrange other access groups. | ||||
| NprvtSwAclObjects | 1.3.6.1.4.1.738.10.6.1.1 | |||
| NprvtSwAclMonProfiles | 1.3.6.1.4.1.738.10.6.1.1.1 | |||
| TprvtSwAclMonPrfTable | 1.3.6.1.4.1.738.10.6.1.1.1.1 | NA | ||
table · not-accessible · current A list of access group monitoring profiles. Up to 50 monitoring profiles are supported. Note that each profile defined in prvtSwAclMonPrfTable must at all times have in prvtSwAclMonPrfStatsTable at least one type of statistic configured (created) for monitoring. This requires that, when creating a new monitoring profile, the SNMP set operation must contain two createAndGo operations, one for creating the entry in prvtSwAclMonPrfTable, and one for simultaneously creating the entry in prvtSwAclMonPrfStatsTable. Deleting a monitoring profile in prvtSwAclMonPrfTable, also deletes all entries belonging to this monitoring profile in prvtSwAclMonPrfStatsTable. | ||||
| RprvtSwAclMonPrfEntry | 1.3.6.1.4.1.738.10.6.1.1.1.1.1 | NA | ||
| CprvtSwAclMonPrfId | 1.3.6.1.4.1.738.10.6.1.1.1.1.1.1 | PrvtSwAclProfileIdType | NA | |
column · PrvtSwAclProfileIdType · not-accessible · current Uniquely identifies a monitoring profile. | ||||
| CprvtSwAclMonPrfIdRowStatus | 1.3.6.1.4.1.738.10.6.1.1.1.1.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for the monitoring profile. | ||||
| TprvtSwAclMonPrfStatsTable | 1.3.6.1.4.1.738.10.6.1.1.1.2 | NA | ||
table · not-accessible · current A list of which statistics a monitoring profile should monitor. Up to a maximum of twenty statistics may be monitored per profile. Note that each profile defined in prvtSwAclMonPrfTable must at all times have in prvtSwAclMonPrfStatsTable at least one type of statistic configured (created) for monitoring. Thus, when deleting, from prvtSwAclMonPrfStatsTable, the last remaining row for a particular monitoring profile, the monitoring profile's entry in prvtSwAclMonPrfTable must also be deleted within the same SNMP set operation. Alternatively, to delete the last remaining statistic for a particular monitoring profile, just delete the monitoring profile in prvtSwAclMonPrfTable. | ||||
| RprvtSwAclMonPrfStatsEntry | 1.3.6.1.4.1.738.10.6.1.1.1.2.1 | NA | ||
row · not-accessible · current An entry in prvtSwAclMonPrfStatsTable. | ||||
| CprvtSwAclMonPrfStatsType | 1.3.6.1.4.1.738.10.6.1.1.1.2.1.1 | PrvtSwAclStatsType | NA | |
column · PrvtSwAclStatsType · not-accessible · current A type of statistic to monitor. | ||||
| CprvtSwAclMonPrfStatsRowStatus | 1.3.6.1.4.1.738.10.6.1.1.1.2.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for prvtSwAclMonPrfStatsTable. | ||||
| NprvtSwAclGroups | 1.3.6.1.4.1.738.10.6.1.1.2 | |||
| TprvtSwAclStdTable | 1.3.6.1.4.1.738.10.6.1.1.2.1 | NA | ||
table · not-accessible · current A list of standard IP Access Control Lists. Up to 250 entries are supported. | ||||
| RprvtSwAclStdEntry | 1.3.6.1.4.1.738.10.6.1.1.2.1.1 | NA | ||
| CprvtSwAclStdName | 1.3.6.1.4.1.738.10.6.1.1.2.1.1.1 | PrvtSwAclNameType | NA | |
column · PrvtSwAclNameType · not-accessible · current A string uniquely identifying a standard IP Access Control List. | ||||
| CprvtSwAclStdRowStatus | 1.3.6.1.4.1.738.10.6.1.1.2.1.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for this standard Access Control List. | ||||
| CprvtSwAclStdDescr | 1.3.6.1.4.1.738.10.6.1.1.2.1.1.3 | PrvtSwAclDescrType | RC | |
column · PrvtSwAclDescrType · read-create · current An arbitrary description to assign to this standard Access Control List. | ||||
| TprvtSwAclStdRuleTable | 1.3.6.1.4.1.738.10.6.1.1.2.2 | NA | ||
table · not-accessible · current A list of rules for standard IP access-lists. Up to 250 entries are supported per prvtSwAclStdName. | ||||
| RprvtSwAclStdRuleEntry | 1.3.6.1.4.1.738.10.6.1.1.2.2.1 | NA | ||
row · not-accessible · current An entry in prvtSwAclStdRuleTable. | ||||
| CprvtSwAclStdRuleId | 1.3.6.1.4.1.738.10.6.1.1.2.2.1.1 | PrvtSwAclRuleIdType | NA | |
column · PrvtSwAclRuleIdType · not-accessible · current Index of the particular rule within the standard IP access control list. | ||||
| CprvtSwAclStdRuleRowStatus | 1.3.6.1.4.1.738.10.6.1.1.2.2.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for this standard access-list rule. | ||||
| CprvtSwAclStdRuleAction | 1.3.6.1.4.1.738.10.6.1.1.2.2.1.3 | PrvtSwAclAction | RC | |
column · PrvtSwAclAction · read-create · current The action to perform when the condition of this access-list rule is true. | ||||
| CprvtSwAclStdRuleIpSrcPrefix | 1.3.6.1.4.1.738.10.6.1.1.2.2.1.4 | PrvtSwAclIpv4PrefixType | RC | |
column · PrvtSwAclIpv4PrefixType · read-create · current The IP source address prefix defining a subnet associated with this access-list rule. | ||||
| CprvtSwAclStdRuleVlanId | 1.3.6.1.4.1.738.10.6.1.1.2.2.1.5 | PrvtSwAclVlanIdTypeOrNone | RC | |
column · PrvtSwAclVlanIdTypeOrNone · read-create · current The VLAN ID associated with this access-list rule. This must be set to the value '0' (no VLAN ID) when in untagged mode (i.e. when prvtSwAclStdRuleUntaggedMode equals 'true'). | ||||
| CprvtSwAclStdRuleVlanMask | 1.3.6.1.4.1.738.10.6.1.1.2.2.1.6 | PrvtSwAclVlanMaskType | RC | |
column · PrvtSwAclVlanMaskType · read-create · current The VLAN mask to use with this access-list rule. This must be set to all ones (0xffff) (always match) when in untagged mode (i.e. when prvtSwAclStdRuleUntaggedMode equals 'true'). | ||||
| CprvtSwAclStdRuleInnerVlanId | 1.3.6.1.4.1.738.10.6.1.1.2.2.1.7 | PrvtSwAclVlanIdTypeOrNone | RC | |
column · PrvtSwAclVlanIdTypeOrNone · read-create · current The inner VLAN ID associated with this access-list rule. This must be set to the value '0' (no VLAN ID) when in untagged mode (i.e. when prvtSwAclStdRuleUntaggedMode equals 'true'). | ||||
| CprvtSwAclStdRuleInnerVlanMask | 1.3.6.1.4.1.738.10.6.1.1.2.2.1.8 | PrvtSwAclVlanMaskType | RC | |
column · PrvtSwAclVlanMaskType · read-create · current The inner VLAN mask to use with this access-list rule. This must be set to all ones (0xffff) (always match) when in untagged mode (i.e. when prvtSwAclStdRuleUntaggedMode equals 'true'). | ||||
| CprvtSwAclStdRuleVpt | 1.3.6.1.4.1.738.10.6.1.1.2.2.1.9 | PrvtSwAclVptTypeOrNone | RC | |
column · PrvtSwAclVptTypeOrNone · read-create · current The VLAN priority tag associated with this access-list rule. A value of '8' indicates that the VPT field is ignored. This must be set to the value '8' (ignore VPT field) when in untagged mode (i.e. when prvtSwAclStdRuleUntaggedMode equals 'true'). | ||||
| CprvtSwAclStdRuleInnerVpt | 1.3.6.1.4.1.738.10.6.1.1.2.2.1.10 | PrvtSwAclVptTypeOrNone | RC | |
column · PrvtSwAclVptTypeOrNone · read-create · current The inner VLAN priority tag associated with this access-list rule. A value of '8' indicates that the VPT field is ignored. This must be set to the value '8' (ignore VPT field) when in untagged mode (i.e. when prvtSwAclStdRuleUntaggedMode equals 'true'). | ||||
| CprvtSwAclStdRuleDscp | 1.3.6.1.4.1.738.10.6.1.1.2.2.1.11 | PrvtSwAclDscpTypeOrNone | RC | |
column · PrvtSwAclDscpTypeOrNone · read-create · current The DiffServ Code Point associated with this access-list rule. A value of '64' indicates that the DSCP field is ignored. | ||||
| CprvtSwAclStdRuleUntaggedMode | 1.3.6.1.4.1.738.10.6.1.1.2.2.1.12 | TruthValue | RC | |
column · TruthValue · read-create · current Enables untagged mode. In untagged mode, only untagged frames are included in the match comparison, otherwise all tagged and untagged frames are included. | ||||
| TprvtSwAclExtTable | 1.3.6.1.4.1.738.10.6.1.1.2.3 | NA | ||
table · not-accessible · current A list of extended IP Access Control Lists. Up to 250 entries are supported. | ||||
| RprvtSwAclExtEntry | 1.3.6.1.4.1.738.10.6.1.1.2.3.1 | NA | ||
| CprvtSwAclExtName | 1.3.6.1.4.1.738.10.6.1.1.2.3.1.1 | PrvtSwAclNameType | NA | |
column · PrvtSwAclNameType · not-accessible · current A string uniquely identifying an extended IP Access Control List. | ||||
| CprvtSwAclExtRowStatus | 1.3.6.1.4.1.738.10.6.1.1.2.3.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for this extended Access Control List. | ||||
| CprvtSwAclExtDescr | 1.3.6.1.4.1.738.10.6.1.1.2.3.1.3 | PrvtSwAclDescrType | RC | |
column · PrvtSwAclDescrType · read-create · current An arbitrary description to assign to this extended Access Control List. | ||||
| TprvtSwAclExtRuleTable | 1.3.6.1.4.1.738.10.6.1.1.2.4 | NA | ||
table · not-accessible · current A list of rules for extended IP access-lists. Up to 250 entries are supported per prvtSwAclExtName. | ||||
| RprvtSwAclExtRuleEntry | 1.3.6.1.4.1.738.10.6.1.1.2.4.1 | NA | ||
row · not-accessible · current An entry in prvtSwAclExtRuleTable. | ||||
| CprvtSwAclExtRuleId | 1.3.6.1.4.1.738.10.6.1.1.2.4.1.1 | PrvtSwAclRuleIdType | NA | |
column · PrvtSwAclRuleIdType · not-accessible · current Index of the particular rule within the extended IP access control list. | ||||
| CprvtSwAclExtRuleRowStatus | 1.3.6.1.4.1.738.10.6.1.1.2.4.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for this extended access-list rule. | ||||
| CprvtSwAclExtRuleAction | 1.3.6.1.4.1.738.10.6.1.1.2.4.1.3 | PrvtSwAclAction | RC | |
column · PrvtSwAclAction · read-create · current The action to perform when the condition of this access-list rule is true. | ||||
| CprvtSwAclExtRuleIpProtocol | 1.3.6.1.4.1.738.10.6.1.1.2.4.1.4 | PrvtSwAclIpProtocol | RC | |
column · PrvtSwAclIpProtocol · read-create · current The IP protocol number associated with this access-list rule. | ||||
| CprvtSwAclExtRuleIpSrcPrefix | 1.3.6.1.4.1.738.10.6.1.1.2.4.1.5 | PrvtSwAclIpv4PrefixType | RC | |
column · PrvtSwAclIpv4PrefixType · read-create · current The IP source address prefix defining the subnet associated with this flow. | ||||
| CprvtSwAclExtRuleIpDstPrefix | 1.3.6.1.4.1.738.10.6.1.1.2.4.1.6 | PrvtSwAclIpv4PrefixType | RC | |
column · PrvtSwAclIpv4PrefixType · read-create · current The IP destination address prefix defining the subnet associated with this flow. | ||||
| CprvtSwAclExtRuleIcmpType | 1.3.6.1.4.1.738.10.6.1.1.2.4.1.7 | Integer32 (-1..255) | RC | |
column · Integer32 (-1..255) · read-create · current The ICMP message type associated with this access-list rule. Only used when prvtSwAclExtRuleIpProtocol equals icmp(1). The value '-1' indicates ignore ICMP message type field. | ||||
| CprvtSwAclExtRuleIcmpCode | 1.3.6.1.4.1.738.10.6.1.1.2.4.1.8 | Integer32 (-1..255) | RC | |
column · Integer32 (-1..255) · read-create · current The ICMP message code associated with this access-list rule. Only used when prvtSwAclExtRuleIpProtocol equals icmp(1). The value '-1' indicates ignore ICMP message code field. | ||||
| CprvtSwAclExtRuleEstablished | 1.3.6.1.4.1.738.10.6.1.1.2.4.1.9 | TruthValue | RC | |
column · TruthValue · read-create · current When TCP protocol type is chosen, setting this object to 'true' indicates that established connections will be matched. Only used when prvtSwAclExtRuleIpProtocol equals tcp(6). | ||||
| CprvtSwAclExtRuleTcpSrcPort | 1.3.6.1.4.1.738.10.6.1.1.2.4.1.10 | PrvtSwAclPortIdTypeOrNone | RC | |
column · PrvtSwAclPortIdTypeOrNone · read-create · current The TCP source port associated with this access-list rule. Only used when prvtSwAclExtRuleIpProtocol equals tcp(6). The value '-1' indicates ignore the TCP source port field. | ||||
| CprvtSwAclExtRuleTcpDstPort | 1.3.6.1.4.1.738.10.6.1.1.2.4.1.11 | PrvtSwAclPortIdTypeOrNone | RC | |
column · PrvtSwAclPortIdTypeOrNone · read-create · current The TCP destination port associated with this access-list rule. Only used when prvtSwAclExtRuleIpProtocol equals tcp(6). The value '-1' indicates ignore the TCP destination port field. | ||||
| CprvtSwAclExtRuleUdpSrcPort | 1.3.6.1.4.1.738.10.6.1.1.2.4.1.12 | PrvtSwAclPortIdTypeOrNone | RC | |
column · PrvtSwAclPortIdTypeOrNone · read-create · current The UDP source port associated with this access-list rule. Only used when prvtSwAclExtRuleIpProtocol equals udp(17). The value '-1' indicates ignore the UDP source port field. | ||||
| CprvtSwAclExtRuleUdpDstPort | 1.3.6.1.4.1.738.10.6.1.1.2.4.1.13 | PrvtSwAclPortIdTypeOrNone | RC | |
column · PrvtSwAclPortIdTypeOrNone · read-create · current The UDP destination port associated with this access-list rule. Only used when prvtSwAclExtRuleIpProtocol equals udp(17). The value '-1' indicates ignore the UDP destination port field. | ||||
| CprvtSwAclExtRuleTos | 1.3.6.1.4.1.738.10.6.1.1.2.4.1.14 | PrvtSwAclTosTypeOrNone | RC | |
column · PrvtSwAclTosTypeOrNone · read-create · current The Type of Service value associated with this access-list rule. The value '16' indicates that the TOS field is ignored. | ||||
| CprvtSwAclExtRulePrecedence | 1.3.6.1.4.1.738.10.6.1.1.2.4.1.15 | PrvtSwAclPrecedenceTypeOrNone | RC | |
column · PrvtSwAclPrecedenceTypeOrNone · read-create · current The Precedence value associated with this access-list rule. The value '8' indicates that the Precedence field is ignored. | ||||
| CprvtSwAclExtRuleVlanId | 1.3.6.1.4.1.738.10.6.1.1.2.4.1.16 | PrvtSwAclVlanIdTypeOrNone | RC | |
column · PrvtSwAclVlanIdTypeOrNone · read-create · current The VLAN ID associated with this access-list rule. This must be set to the value '0' (no VLAN ID) when in untagged mode (i.e. when prvtSwAclExtRuleUntaggedMode equals 'true'). | ||||
| CprvtSwAclExtRuleVlanMask | 1.3.6.1.4.1.738.10.6.1.1.2.4.1.17 | PrvtSwAclVlanMaskType | RC | |
column · PrvtSwAclVlanMaskType · read-create · current The VLAN mask to use with this access-list rule. This must be set to all ones (0xffff) (always match) when in untagged mode (i.e. when prvtSwAclExtRuleUntaggedMode equals 'true'). | ||||
| CprvtSwAclExtRuleInnerVlanId | 1.3.6.1.4.1.738.10.6.1.1.2.4.1.18 | PrvtSwAclVlanIdTypeOrNone | RC | |
column · PrvtSwAclVlanIdTypeOrNone · read-create · current The inner VLAN ID associated with this access-list rule. This must be set to the value '0' (no VLAN ID) when in untagged mode (i.e. when prvtSwAclExtRuleUntaggedMode equals 'true'). | ||||
| CprvtSwAclExtRuleInnerVlanMask | 1.3.6.1.4.1.738.10.6.1.1.2.4.1.19 | PrvtSwAclVlanMaskType | RC | |
column · PrvtSwAclVlanMaskType · read-create · current The inner VLAN mask to use with this access-list rule. This must be set to all ones (0xffff) (always match) when in untagged mode (i.e. when prvtSwAclExtRuleUntaggedMode equals 'true'). | ||||
| CprvtSwAclExtRuleVpt | 1.3.6.1.4.1.738.10.6.1.1.2.4.1.20 | PrvtSwAclVptTypeOrNone | RC | |
column · PrvtSwAclVptTypeOrNone · read-create · current The VLAN priority tag associated with this access-list rule. A value of '8' indicates that the VPT field is ignored. This must be set to the value '8' (ignore VPT field) when in untagged mode (i.e. when prvtSwAclExtRuleUntaggedMode equals 'true'). | ||||
| CprvtSwAclExtRuleInnerVpt | 1.3.6.1.4.1.738.10.6.1.1.2.4.1.21 | PrvtSwAclVptTypeOrNone | RC | |
column · PrvtSwAclVptTypeOrNone · read-create · current The inner VLAN priority tag associated with this access-list rule. A value of '8' indicates that the VPT field is ignored. This must be set to the value '8' (ignore VPT field) when in untagged mode (i.e. when prvtSwAclExtRuleUntaggedMode equals 'true'). | ||||
| CprvtSwAclExtRuleDscp | 1.3.6.1.4.1.738.10.6.1.1.2.4.1.22 | PrvtSwAclDscpTypeOrNone | RC | |
column · PrvtSwAclDscpTypeOrNone · read-create · current The DiffServ Code Point associated with this access-list rule. A value of '64' indicates that the DSCP field is ignored. | ||||
| CprvtSwAclExtRuleUntaggedMode | 1.3.6.1.4.1.738.10.6.1.1.2.4.1.23 | TruthValue | RC | |
column · TruthValue · read-create · current Enables untagged mode. In untagged mode, only untagged frames are included in the match comparison, otherwise all tagged and untagged frames are included. | ||||
| TprvtSwAclMacTable | 1.3.6.1.4.1.738.10.6.1.1.2.5 | NA | ||
table · not-accessible · current A list of MAC Access Control Lists. Up to 250 entries are supported. | ||||
| RprvtSwAclMacEntry | 1.3.6.1.4.1.738.10.6.1.1.2.5.1 | NA | ||
| CprvtSwAclMacName | 1.3.6.1.4.1.738.10.6.1.1.2.5.1.1 | PrvtSwAclNameType | NA | |
column · PrvtSwAclNameType · not-accessible · current A string uniquely identifying a MAC Access Control List. | ||||
| CprvtSwAclMacRowStatus | 1.3.6.1.4.1.738.10.6.1.1.2.5.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for this MAC Access Control List. | ||||
| CprvtSwAclMacDescr | 1.3.6.1.4.1.738.10.6.1.1.2.5.1.3 | PrvtSwAclDescrType | RC | |
column · PrvtSwAclDescrType · read-create · current An arbitrary description to assign to this MAC Access Control List. | ||||
| TprvtSwAclMacRuleTable | 1.3.6.1.4.1.738.10.6.1.1.2.6 | NA | ||
table · not-accessible · current A list of rules for MAC access-lists. Up to 250 entries are supported per prvtSwAclMacName. | ||||
| RprvtSwAclMacRuleEntry | 1.3.6.1.4.1.738.10.6.1.1.2.6.1 | NA | ||
row · not-accessible · current An entry in prvtSwAclMacRuleTable. | ||||
| CprvtSwAclMacRuleId | 1.3.6.1.4.1.738.10.6.1.1.2.6.1.1 | PrvtSwAclRuleIdType | NA | |
column · PrvtSwAclRuleIdType · not-accessible · current Index of the particular rule within the MAC access control list. | ||||
| CprvtSwAclMacRuleRowStatus | 1.3.6.1.4.1.738.10.6.1.1.2.6.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for this MAC access-list rule. | ||||
| CprvtSwAclMacRuleAction | 1.3.6.1.4.1.738.10.6.1.1.2.6.1.3 | PrvtSwAclAction | RC | |
column · PrvtSwAclAction · read-create · current The action to perform when the condition of this access-list rule is true. | ||||
| CprvtSwAclMacRuleMacSrc | 1.3.6.1.4.1.738.10.6.1.1.2.6.1.4 | MacAddress | RC | |
column · MacAddress · read-create · current The MAC source address associated with this access-list rule. | ||||
| CprvtSwAclMacRuleMacSrcMask | 1.3.6.1.4.1.738.10.6.1.1.2.6.1.5 | MacAddress | RC | |
column · MacAddress · read-create · current The mask to use with the MAC source address associated with this access-list rule. A '1' in a bit position will result in the corresponding bit in the source MAC address becoming 'don't care' (i.e. always match). Thus, a value of all ones will result in any MAC source address matching. | ||||
| CprvtSwAclMacRuleMacDst | 1.3.6.1.4.1.738.10.6.1.1.2.6.1.6 | MacAddress | RC | |
column · MacAddress · read-create · current The MAC destination address associated with this access-list rule. | ||||
| CprvtSwAclMacRuleMacDstMask | 1.3.6.1.4.1.738.10.6.1.1.2.6.1.7 | MacAddress | RC | |
column · MacAddress · read-create · current The mask to use with the MAC destination address associated with this access-list rule. A '1' in a bit position will result in the corresponding bit in the destination MAC address becoming 'don't care' (i.e. always match). Thus, a value of all ones will result in any MAC destination address matching. | ||||
| CprvtSwAclMacRuleTos | 1.3.6.1.4.1.738.10.6.1.1.2.6.1.8 | PrvtSwAclTosTypeOrNone | RC | |
column · PrvtSwAclTosTypeOrNone · read-create · current The Type of Service value associated with this access-list rule. The value '16' indicates that the TOS field is ignored. | ||||
| CprvtSwAclMacRulePrecedence | 1.3.6.1.4.1.738.10.6.1.1.2.6.1.9 | PrvtSwAclPrecedenceTypeOrNone | RC | |
column · PrvtSwAclPrecedenceTypeOrNone · read-create · current The Precedence value associated with this access-list rule. The value '8' indicates that the Precedence field is ignored. | ||||
| CprvtSwAclMacRuleVlanId | 1.3.6.1.4.1.738.10.6.1.1.2.6.1.10 | PrvtSwAclVlanIdTypeOrNone | RC | |
column · PrvtSwAclVlanIdTypeOrNone · read-create · current The VLAN ID associated with this access-list rule. This must be set to the value '0' (no VLAN ID) when in untagged mode (i.e. when prvtSwAclMacRuleUntaggedMode equals 'true'). | ||||
| CprvtSwAclMacRuleVlanMask | 1.3.6.1.4.1.738.10.6.1.1.2.6.1.11 | PrvtSwAclVlanMaskType | RC | |
column · PrvtSwAclVlanMaskType · read-create · current The VLAN mask to use with this access-list rule. This must be set to all ones (0xffff) (always match) when in untagged mode (i.e. when prvtSwAclMacRuleUntaggedMode equals 'true'). | ||||
| CprvtSwAclMacRuleInnerVlanId | 1.3.6.1.4.1.738.10.6.1.1.2.6.1.12 | PrvtSwAclVlanIdTypeOrNone | RC | |
column · PrvtSwAclVlanIdTypeOrNone · read-create · current The inner VLAN ID associated with this access-list rule. This must be set to the value '0' (no VLAN ID) when in untagged mode (i.e. when prvtSwAclMacRuleUntaggedMode equals 'true'). | ||||
| CprvtSwAclMacRuleInnerVlanMask | 1.3.6.1.4.1.738.10.6.1.1.2.6.1.13 | PrvtSwAclVlanMaskType | RC | |
column · PrvtSwAclVlanMaskType · read-create · current The inner VLAN mask to use with this access-list rule. This must be set to all ones (0xffff) (always match) when in untagged mode (i.e. when prvtSwAclMAcRuleUntaggedMode equals 'true'). | ||||
| CprvtSwAclMacRuleVpt | 1.3.6.1.4.1.738.10.6.1.1.2.6.1.14 | PrvtSwAclVptTypeOrNone | RC | |
column · PrvtSwAclVptTypeOrNone · read-create · current The VLAN priority tag associated with this access-list rule. A value of '8' indicates that the VPT field is ignored. This must be set to the value '8' (ignore VPT field) when in untagged mode (i.e. when prvtSwAclMacRuleUntaggedMode equals 'true'). | ||||
| CprvtSwAclMacRuleInnerVpt | 1.3.6.1.4.1.738.10.6.1.1.2.6.1.15 | PrvtSwAclVptTypeOrNone | RC | |
column · PrvtSwAclVptTypeOrNone · read-create · current The inner VLAN priority tag associated with this access-list rule. A value of '8' indicates that the VPT field is ignored. This must be set to the value '8' (ignore VPT field) when in untagged mode (i.e. when prvtSwAclMacRuleUntaggedMode equals 'true'). | ||||
| CprvtSwAclMacRuleDscp | 1.3.6.1.4.1.738.10.6.1.1.2.6.1.16 | PrvtSwAclDscpTypeOrNone | RC | |
column · PrvtSwAclDscpTypeOrNone · read-create · current The DiffServ Code Point associated with this access-list rule. A value of '64' indicates that the DSCP field is ignored. | ||||
| CprvtSwAclMacRuleUntaggedMode | 1.3.6.1.4.1.738.10.6.1.1.2.6.1.17 | TruthValue | RC | |
column · TruthValue · read-create · current Enables untagged mode. In untagged mode, only untagged frames are included in the match comparison, otherwise all tagged and untagged frames are included. | ||||
| CprvtSwAclMacRuleDstAddrType | 1.3.6.1.4.1.738.10.6.1.1.2.6.1.18 | PrvtSwAclMatchTrafficType | RC | |
column · PrvtSwAclMatchTrafficType · read-create · current What type of traffic (based on destination address) to match. | ||||
| TprvtSwAclEthTable | 1.3.6.1.4.1.738.10.6.1.1.2.7 | NA | ||
table · not-accessible · current A list of EtherType Access Control Lists. Up to 250 entries are supported. | ||||
| RprvtSwAclEthEntry | 1.3.6.1.4.1.738.10.6.1.1.2.7.1 | NA | ||
| CprvtSwAclEthName | 1.3.6.1.4.1.738.10.6.1.1.2.7.1.1 | PrvtSwAclNameType | NA | |
column · PrvtSwAclNameType · not-accessible · current A string uniquely identifying an EtherType Access Control List. | ||||
| CprvtSwAclEthRowStatus | 1.3.6.1.4.1.738.10.6.1.1.2.7.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for this EtherType Access Control List. | ||||
| CprvtSwAclEthDescr | 1.3.6.1.4.1.738.10.6.1.1.2.7.1.3 | PrvtSwAclDescrType | RC | |
column · PrvtSwAclDescrType · read-create · current An arbitrary description to assign to this EtherType Access Control List. | ||||
| TprvtSwAclEthRuleTable | 1.3.6.1.4.1.738.10.6.1.1.2.8 | NA | ||
table · not-accessible · current A list of rules for EtherType access-lists. Up to 250 entries are supported per prvtSwAclEthName. | ||||
| RprvtSwAclEthRuleEntry | 1.3.6.1.4.1.738.10.6.1.1.2.8.1 | NA | ||
row · not-accessible · current An entry in prvtSwAclEthRuleTable. | ||||
| CprvtSwAclEthRuleId | 1.3.6.1.4.1.738.10.6.1.1.2.8.1.1 | PrvtSwAclRuleIdType | NA | |
column · PrvtSwAclRuleIdType · not-accessible · current Index of the particular rule within the EtherType IP access control list. | ||||
| CprvtSwAclEthRuleRowStatus | 1.3.6.1.4.1.738.10.6.1.1.2.8.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for EtherType access-list rule. | ||||
| CprvtSwAclEthRuleAction | 1.3.6.1.4.1.738.10.6.1.1.2.8.1.3 | PrvtSwAclAction | RC | |
column · PrvtSwAclAction · read-create · current The action to perform when the condition of this access-list rule is true. | ||||
| CprvtSwAclEthRuleEthType | 1.3.6.1.4.1.738.10.6.1.1.2.8.1.4 | PrvtSwAclEtherType | RC | |
column · PrvtSwAclEtherType · read-create · current The EtherType protocol number associated with this access-list rule. | ||||
| CprvtSwAclEthRuleEthTypeMask | 1.3.6.1.4.1.738.10.6.1.1.2.8.1.5 | PrvtSwAclEtherTypeMask | RC | |
column · PrvtSwAclEtherTypeMask · read-create · current The EtherType protocol mask to use with this access-list rule. A value of all ones (0xffff) will result in any EtherType protocol number matching. | ||||
| CprvtSwAclEthRuleTos | 1.3.6.1.4.1.738.10.6.1.1.2.8.1.6 | PrvtSwAclTosTypeOrNone | RC | |
column · PrvtSwAclTosTypeOrNone · read-create · current The Type of Service value associated with this access-list rule. The value '16' indicates that the TOS field is ignored. | ||||
| CprvtSwAclEthRulePrecedence | 1.3.6.1.4.1.738.10.6.1.1.2.8.1.7 | PrvtSwAclPrecedenceTypeOrNone | RC | |
column · PrvtSwAclPrecedenceTypeOrNone · read-create · current The Precedence value associated with this access-list rule. The value '8' indicates that the Precedence field is ignored. | ||||
| CprvtSwAclEthRuleVlanId | 1.3.6.1.4.1.738.10.6.1.1.2.8.1.8 | PrvtSwAclVlanIdTypeOrNone | RC | |
column · PrvtSwAclVlanIdTypeOrNone · read-create · current The VLAN ID associated with this access-list rule. This must be set to the value '0' (no VLAN ID) when in untagged mode (i.e. when prvtSwAclEthRuleUntaggedMode equals 'true'). | ||||
| CprvtSwAclEthRuleVlanMask | 1.3.6.1.4.1.738.10.6.1.1.2.8.1.9 | PrvtSwAclVlanMaskType | RC | |
column · PrvtSwAclVlanMaskType · read-create · current The VLAN mask to use with this access-list rule. This must be set to all ones (0xffff) (always match) when in untagged mode (i.e. when prvtSwAclEthRuleUntaggedMode equals 'true'). | ||||
| CprvtSwAclEthRuleInnerVlanId | 1.3.6.1.4.1.738.10.6.1.1.2.8.1.10 | PrvtSwAclVlanIdTypeOrNone | RC | |
column · PrvtSwAclVlanIdTypeOrNone · read-create · current The inner VLAN ID associated with this access-list rule. This must be set to the value '0' (no VLAN ID) when in untagged mode (i.e. when prvtSwAclEthRuleUntaggedMode equals 'true'). | ||||
| CprvtSwAclEthRuleInnerVlanMask | 1.3.6.1.4.1.738.10.6.1.1.2.8.1.11 | PrvtSwAclVlanMaskType | RC | |
column · PrvtSwAclVlanMaskType · read-create · current The inner VLAN mask to use with this access-list rule. This must be set to all ones (0xffff) (always match) when in untagged mode (i.e. when prvtSwAclEthRuleUntaggedMode equals 'true'). | ||||
| CprvtSwAclEthRuleVpt | 1.3.6.1.4.1.738.10.6.1.1.2.8.1.12 | PrvtSwAclVptTypeOrNone | RC | |
column · PrvtSwAclVptTypeOrNone · read-create · current The VLAN priority tag associated with this access-list rule. A value of '8' indicates that the VPT field is ignored. This must be set to the value '8' (ignore VPT field) when in untagged mode (i.e. when prvtSwAclEthRuleUntaggedMode equals 'true'). | ||||
| CprvtSwAclEthRuleInnerVpt | 1.3.6.1.4.1.738.10.6.1.1.2.8.1.13 | PrvtSwAclVptTypeOrNone | RC | |
column · PrvtSwAclVptTypeOrNone · read-create · current The inner VLAN priority tag associated with this access-list rule. A value of '8' indicates that the VPT field is ignored. This must be set to the value '8' (ignore VPT field) when in untagged mode (i.e. when prvtSwAclEthRuleUntaggedMode equals 'true'). | ||||
| CprvtSwAclEthRuleDscp | 1.3.6.1.4.1.738.10.6.1.1.2.8.1.14 | PrvtSwAclDscpTypeOrNone | RC | |
column · PrvtSwAclDscpTypeOrNone · read-create · current The DiffServ Code Point associated with this access-list rule. A value of '64' indicates that the DSCP field is ignored. | ||||
| CprvtSwAclEthRuleUntaggedMode | 1.3.6.1.4.1.738.10.6.1.1.2.8.1.15 | TruthValue | RC | |
column · TruthValue · read-create · current Enables untagged mode. In untagged mode, only untagged frames are included in the match comparison, otherwise all tagged and untagged frames are included. | ||||
| NprvtSwAclInterfaces | 1.3.6.1.4.1.738.10.6.1.1.3 | |||
| NprvtSwAclIfAcg | 1.3.6.1.4.1.738.10.6.1.1.3.2 | |||
| TprvtSwAclIfAcgTable | 1.3.6.1.4.1.738.10.6.1.1.3.2.1 | NA | ||
table · not-accessible · current This table creates and controls the properties of traffic flows belonging to physical and LAG interfaces. Up to 250 entries are supported per interface (prvtSwAclIfAcgIndex). The key combination (prvtSwAclIfAcgIndex, prvtSwAclIfAcgSeqId) must be unique (i.e. no more than one entry must exist with the same interface and sequence-id combination). | ||||
| RprvtSwAclIfAcgEntry | 1.3.6.1.4.1.738.10.6.1.1.3.2.1.1 | NA | ||
row · not-accessible · current An entry in prvtSwAclIfAcgTable. | ||||
| CprvtSwAclIfAcgIndex | 1.3.6.1.4.1.738.10.6.1.1.3.2.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The index of the physical or LAG interface to which this row applies. | ||||
| CprvtSwAclIfAcgSeqId | 1.3.6.1.4.1.738.10.6.1.1.3.2.1.1.2 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current Specifies the sequence (order/priority) in which this access group will be applied. | ||||
| CprvtSwAclIfAcgType | 1.3.6.1.4.1.738.10.6.1.1.3.2.1.1.3 | PrvtSwAclAcgType | NA | |
column · PrvtSwAclAcgType · not-accessible · current The type (e.g. ipStd, ipExt, mac, etherType) of access group that this row applies to. | ||||
| CprvtSwAclIfAcgAclName | 1.3.6.1.4.1.738.10.6.1.1.3.2.1.1.4 | PrvtSwAclNameType | NA | |
column · PrvtSwAclNameType · not-accessible · current The name of the access list that this row applies to. This must match the name of an ACL created having the type specified by prvtSwAclIfAcgType. (i.e. it must match one of prvtSwAclStdName, prvtSwAclExtName, prvtSwAclMacName, prvtSwAclEthName corresponding to the type specified in prvtSwAclIfAcgType.) | ||||
| CprvtSwAclIfAcgAclType | 1.3.6.1.4.1.738.10.6.1.1.3.2.1.1.5 | PrvtSwAclGroupType | NA | |
column · PrvtSwAclGroupType · not-accessible · current The type (e.g. in, out, vlan) of access list that this row applies to. | ||||
| CprvtSwAclIfAcgRowStatus | 1.3.6.1.4.1.738.10.6.1.1.3.2.1.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for this access-control group. | ||||
| CprvtSwAclIfAcgVlan | 1.3.6.1.4.1.738.10.6.1.1.3.2.1.1.8 | PrvtSwAclVlanIdTypeOrNone | RC | |
column · PrvtSwAclVlanIdTypeOrNone · read-create · current The ID of the VLAN to which traffic belonging to this access-group will be redirected to. The value of '0' indicates that redirection is disabled. Only applicable for VLAN ACL types (when prvtSwAclIfAcgAclType equals 'vlan'). This object and prvtSwAclIfAcgVlanAdd are not permitted to be simultaneously non-zero. | ||||
| CprvtSwAclIfAcgVlanAdd | 1.3.6.1.4.1.738.10.6.1.1.3.2.1.1.9 | PrvtSwAclVlanIdTypeOrNone | RC | |
column · PrvtSwAclVlanIdTypeOrNone · read-create · current The ID of the VLAN to which traffic belonging to this access-group will have added to. The value of '0' indicates that redirection is disabled. Only applicable for VLAN ACL types (when prvtSwAclIfAcgAclType equals 'vlan'). This object and prvtSwAclIfAcgVlan are not permitted to be simultaneously non-zero. | ||||
| CprvtSwAclIfAcgVpt | 1.3.6.1.4.1.738.10.6.1.1.3.2.1.1.10 | PrvtSwAclVptTypeOrNone | RC | |
column · PrvtSwAclVptTypeOrNone · read-create · current The VLAN priority tag to assign to traffic belonging to this access-group. A value of '8' indicates that the VPT field is unaffected. Only used for egress ACL types (when prvtSwAclIfAcgGroupType equals 'out'). | ||||
| CprvtSwAclIfAcgInnerVpt | 1.3.6.1.4.1.738.10.6.1.1.3.2.1.1.11 | PrvtSwAclVptTypeOrNone | RC | |
column · PrvtSwAclVptTypeOrNone · read-create · current The inner VLAN priority tag to assign to traffic belonging to this access-group. A value of '8' indicates that the inner VPT field is unaffected. Only used for egress ACL types (when prvtSwAclIfAcgGroupType equals 'out'). | ||||
| CprvtSwAclIfAcgDscp | 1.3.6.1.4.1.738.10.6.1.1.3.2.1.1.12 | PrvtSwAclDscpTypeOrNone | RC | |
column · PrvtSwAclDscpTypeOrNone · read-create · current The DSCP value to assign to traffic belonging to this access-group. A value of '64' indicates that the DSCP field is not affected. Only used when prvtSwAclIfAcgGroupType equals 'out'. | ||||
| CprvtSwAclIfAcgColorGreenFc | 1.3.6.1.4.1.738.10.6.1.1.3.2.1.1.13 | PrvtSwAclFcTypeOrNone | RC | |
column · PrvtSwAclFcTypeOrNone · read-create · current Map traffic marked as green from the ACG rate-limit to a Forwarding Class (FC). The value 'none' indicates that the FC is not to be affected. Only used when prvtSwAclIfAcgGroupType equals 'in'. | ||||
| CprvtSwAclIfAcgColorYellowFc | 1.3.6.1.4.1.738.10.6.1.1.3.2.1.1.14 | PrvtSwAclFcTypeOrNone | RC | |
column · PrvtSwAclFcTypeOrNone · read-create · current Map traffic marked as yellow from ACG rate-limit to a Forwarding Class (FC). The value 'none' indicates that the FC is not to be affected. Only used when prvtSwAclIfAcgGroupType equals 'in'. | ||||
| CprvtSwAclIfAcgColorRedFc | 1.3.6.1.4.1.738.10.6.1.1.3.2.1.1.15 | PrvtSwAclFcTypeOrNone | RC | |
column · PrvtSwAclFcTypeOrNone · read-create · current Map traffic marked as red from ACG rate-limit to a Forwarding Class (FC). The value 'none' indicates that the FC is not to be affected. Only used when prvtSwAclIfAcgGroupType equals 'in'. | ||||
| CprvtSwAclIfAcgColorGreenVpt | 1.3.6.1.4.1.738.10.6.1.1.3.2.1.1.16 | PrvtSwAclVptTypeOrNone | RC | |
column · PrvtSwAclVptTypeOrNone · read-create · current Remark, with the specifed value, the VLAN priority field of frames for traffic marked as green. The value '8' indicates that the field should not be re-marked. Only used for egress ACL types (when prvtSwAclIfAcgGroupType equals 'out'). | ||||
| CprvtSwAclIfAcgColorYellowVpt | 1.3.6.1.4.1.738.10.6.1.1.3.2.1.1.17 | PrvtSwAclVptTypeOrNone | RC | |
column · PrvtSwAclVptTypeOrNone · read-create · current Remark, with the specifed value, the VLAN priority field of frames for traffic marked as yellow. The value '8' indicates that the field should not be re-marked. Only used for egress ACL types (when prvtSwAclIfAcgGroupType equals 'out'). | ||||
| CprvtSwAclIfAcgColorRedVpt | 1.3.6.1.4.1.738.10.6.1.1.3.2.1.1.18 | PrvtSwAclVptTypeOrNone | RC | |
column · PrvtSwAclVptTypeOrNone · read-create · current Remark, with the specifed value, the VLAN priority field of frames for traffic marked as green. The value '8' indicates that the field should not be re-marked. Only used for egress ACL types (when prvtSwAclIfAcgGroupType equals 'out'). | ||||
| CprvtSwAclIfAcgColorGreenDscp | 1.3.6.1.4.1.738.10.6.1.1.3.2.1.1.19 | PrvtSwAclDscpTypeOrNone | RC | |
column · PrvtSwAclDscpTypeOrNone · read-create · current Remark, with the specifed value, the DSCP field of frames for traffic marked as green. A value of '64' indicates that the DSCP value should not be re-marked. Only used for egress ACL types (when prvtSwAclIfAcgGroupType equals 'out'). | ||||
| CprvtSwAclIfAcgColorYellowDscp | 1.3.6.1.4.1.738.10.6.1.1.3.2.1.1.20 | PrvtSwAclDscpTypeOrNone | RC | |
column · PrvtSwAclDscpTypeOrNone · read-create · current Remark, with the specifed value, the DSCP field of frames for traffic marked as yellow. Only used for egress ACL types (when prvtSwAclIfAcgGroupType equals 'out'). | ||||
| CprvtSwAclIfAcgColorRedDscp | 1.3.6.1.4.1.738.10.6.1.1.3.2.1.1.21 | PrvtSwAclDscpTypeOrNone | RC | |
column · PrvtSwAclDscpTypeOrNone · read-create · current Remark, with the specifed value, the DSCP field of frames for traffic marked as red. Only used for egress ACL types (when prvtSwAclIfAcgGroupType equals 'out'). | ||||
| CprvtSwAclIfAcgResetStats | 1.3.6.1.4.1.738.10.6.1.1.3.2.1.1.22 | TruthValue | RC | |
column · TruthValue · read-create · current Set to 'true' to reset statistics for this SAP access group. Reads always return the value 'false'. | ||||
| TprvtSwAclIfAcgRLimitTable | 1.3.6.1.4.1.738.10.6.1.1.3.2.2 | NA | ||
table · not-accessible · current Used to specify for this traffic flow which type of rate-limiting to use and the parameters of the rate-limiting method. Only one entry may exist (i.e. one rate-limiting method may be used) for a particular traffic flow. Not available for VLAN ACL types (when prvtSwAclIfAcgAclType equals 'vlan'). For a particular traffic flow, this table and prvtSwAclIfAcgFcTable are mutually exclusive (i.e. a traffic flow is prohibited from having an entry in this table and in prvtSwAclIfAcgFcTable concurrently). | ||||
| RprvtSwAclIfAcgRLimitEntry | 1.3.6.1.4.1.738.10.6.1.1.3.2.2.1 | NA | ||
row · not-accessible · current An entry in prvtSwAclIfAcgRLimitTable. | ||||
| CprvtSwAclIfAcgRLimitType | 1.3.6.1.4.1.738.10.6.1.1.3.2.2.1.1 | PrvtSwAclRateLimitType | NA | |
column · PrvtSwAclRateLimitType · not-accessible · current Specifies the type (single vs. dual) of rate-limiting to use. | ||||
| CprvtSwAclIfAcgRLimitRowStatus | 1.3.6.1.4.1.738.10.6.1.1.3.2.2.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for this rate limit function. | ||||
| CprvtSwAclIfAcgRLimitCir | 1.3.6.1.4.1.738.10.6.1.1.3.2.2.1.3 | PrvtSwAclRateType | RC | |
column · PrvtSwAclRateType · read-create · current The Committed Information Rate. | ||||
| CprvtSwAclIfAcgRLimitCbs | 1.3.6.1.4.1.738.10.6.1.1.3.2.2.1.4 | PrvtSwAclBurstSizeType | RC | |
column · PrvtSwAclBurstSizeType · read-create · current The Committed Burst Size. | ||||
| CprvtSwAclIfAcgRLimitEbs | 1.3.6.1.4.1.738.10.6.1.1.3.2.2.1.5 | PrvtSwAclBurstSizeType | RC | |
column · PrvtSwAclBurstSizeType · read-create · current The Excess Burst Size. Only applicable when using single rate limiting (prvtSwAclIfAcgRLimitType equals 'single'). | ||||
| CprvtSwAclIfAcgRLimitPir | 1.3.6.1.4.1.738.10.6.1.1.3.2.2.1.6 | PrvtSwAclRateType | RC | |
column · PrvtSwAclRateType · read-create · current The Peak Information Rate. Only applicable when using dual rate limiting (prvtSwAclIfAcgRLimitType equals 'dual'). When using dual rate limiting, prvtSwAclIfAcgRLimitPir must be greater than or equal to prvtSwAclIfAcgRLimitCir. | ||||
| CprvtSwAclIfAcgRLimitPbs | 1.3.6.1.4.1.738.10.6.1.1.3.2.2.1.7 | PrvtSwAclBurstSizeType | RC | |
column · PrvtSwAclBurstSizeType · read-create · current The Peak Burst Size. Only applicable when using dual rate limiting (when prvtSwAclIfAcgRLimitType equals 'dual'). | ||||
| CprvtSwAclIfAcgRLimitColorAware | 1.3.6.1.4.1.738.10.6.1.1.3.2.2.1.8 | TruthValue | RC | |
column · TruthValue · read-create · current Set to 'true' to enable color aware traffic metering. | ||||
| CprvtSwAclIfAcgRLimitExceedAct | 1.3.6.1.4.1.738.10.6.1.1.3.2.2.1.9 | PrvtSwAclExceedAction | RC | |
column · PrvtSwAclExceedAction · read-create · current The action to perform when the condition is true. 'markRed' is not supported for all devices. 'markYellow' is not supported for dual rate-limit. | ||||
| TprvtSwAclIfAcgRedirectTable | 1.3.6.1.4.1.738.10.6.1.1.3.2.3 | NA | ||
table · not-accessible · current Used to specify if this traffic flow should be redirected to another interface. Only one entry is allowed (i.e. only one redirect is permitted). Only applicable to ingress ACL types (when prvtSwAclIfAcgAclType equals 'in'). | ||||
| RprvtSwAclIfAcgRedirectEntry | 1.3.6.1.4.1.738.10.6.1.1.3.2.3.1 | NA | ||
row · not-accessible · current An entry in prvtSwAclIfAcgRedirectTable. | ||||
| CprvtSwAclIfAcgRedirectIfIndex | 1.3.6.1.4.1.738.10.6.1.1.3.2.3.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex of a physical interface defined in the ifTable to which traffic should be redirected to. | ||||
| CprvtSwAclIfAcgRedirectRowStatus | 1.3.6.1.4.1.738.10.6.1.1.3.2.3.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for prvtSwAclIfAcgRedirectTable. | ||||
| TprvtSwAclIfAcgFcTable | 1.3.6.1.4.1.738.10.6.1.1.3.2.4 | NA | ||
table · not-accessible · current Used to assign parameters to a particular forwarding class within a traffic flow. Only one entry is allowed. Only applicable to ingress ACL types (when prvtSwAclIfAcgAclType equals 'in'). For a particular traffic flow, this table and prvtSwAclIfAcgRLimitTable are mutually exclusive (i.e. a traffic flow is prohibited from having an entry in this table and in prvtSwAclIfAcgFcTable at the same time). | ||||
| RprvtSwAclIfAcgFcEntry | 1.3.6.1.4.1.738.10.6.1.1.3.2.4.1 | NA | ||
row · not-accessible · current An entry in prvtSwAclIfAcgFcTable. | ||||
| CprvtSwAclIfAcgFcId | 1.3.6.1.4.1.738.10.6.1.1.3.2.4.1.1 | PrvtSwAclFcType | NA | |
column · PrvtSwAclFcType · not-accessible · current The forwarding class that this row applies to. | ||||
| CprvtSwAclIfAcgFcRowStatus | 1.3.6.1.4.1.738.10.6.1.1.3.2.4.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for this forwarding class. | ||||
| CprvtSwAclIfAcgFcColor | 1.3.6.1.4.1.738.10.6.1.1.3.2.4.1.3 | PrvtSwAclColorType | RC | |
column · PrvtSwAclColorType · read-create · current The color to assign to traffic belonging to this forwarding class. Color red is not supported for all devices | ||||
| TprvtSwAclIfAcgMonPrfTable | 1.3.6.1.4.1.738.10.6.1.1.3.2.5 | NA | ||
table · not-accessible · current Used to assign a monitoring profile to a traffic flow. Only one profile may be assigned per traffic flow. Only applicable to ingress ACL types (when prvtSwAclIfAcgAclType equals 'in'). | ||||
| RprvtSwAclIfAcgMonPrfEntry | 1.3.6.1.4.1.738.10.6.1.1.3.2.5.1 | NA | ||
row · not-accessible · current An entry in prvtSwAclIfAcgMonPrfTable. | ||||
| CprvtSwAclIfAcgMonPrfRowStatus | 1.3.6.1.4.1.738.10.6.1.1.3.2.5.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for this monitoring profile. | ||||
| CprvtSwAclIfAcgMonPrfMatchF | 1.3.6.1.4.1.738.10.6.1.1.3.2.5.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current The number of frames of traffic matching this traffic flow. | ||||
| CprvtSwAclIfAcgMonPrfMatchB | 1.3.6.1.4.1.738.10.6.1.1.3.2.5.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current The number of bytes of traffic matching this traffic flow. | ||||
| CprvtSwAclIfAcgMonPrfGreenF | 1.3.6.1.4.1.738.10.6.1.1.3.2.5.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current The number of frames of green traffic belonging to this traffic flow. | ||||
| CprvtSwAclIfAcgMonPrfGreenB | 1.3.6.1.4.1.738.10.6.1.1.3.2.5.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current The number of bytes of green traffic belonging to this traffic flow. | ||||
| CprvtSwAclIfAcgMonPrfNotGreenF | 1.3.6.1.4.1.738.10.6.1.1.3.2.5.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current The number of frames of non-green traffic belonging to this traffic flow. | ||||
| CprvtSwAclIfAcgMonPrfNotGreenB | 1.3.6.1.4.1.738.10.6.1.1.3.2.5.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current The number of bytes of non-green traffic belonging to this traffic flow. | ||||
| CprvtSwAclIfAcgMonPrfYellowF | 1.3.6.1.4.1.738.10.6.1.1.3.2.5.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current The number of frames of yellow traffic belonging to this traffic flow. | ||||
| CprvtSwAclIfAcgMonPrfYellowB | 1.3.6.1.4.1.738.10.6.1.1.3.2.5.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current The number of bytes of yellow traffic belonging to this traffic flow. | ||||
| CprvtSwAclIfAcgMonPrfRedF | 1.3.6.1.4.1.738.10.6.1.1.3.2.5.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current The number of frames of red traffic belonging to this traffic flow. | ||||
| CprvtSwAclIfAcgMonPrfRedB | 1.3.6.1.4.1.738.10.6.1.1.3.2.5.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current The number of bytes of red traffic belonging to this traffic flow. | ||||
| CprvtSwAclIfAcgMonPrfNotRedF | 1.3.6.1.4.1.738.10.6.1.1.3.2.5.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current The number of frames of non-red traffic belonging to this traffic flow. | ||||
| CprvtSwAclIfAcgMonPrfNotRedB | 1.3.6.1.4.1.738.10.6.1.1.3.2.5.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current The number of bytes of non-red traffic belonging to this traffic flow. | ||||
| CprvtSwAclIfAcgMonPrfRateMatchF | 1.3.6.1.4.1.738.10.6.1.1.3.2.5.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current The rate, in frames per second, of traffic matching this traffic flow. | ||||
| CprvtSwAclIfAcgMonPrfRateMatchB | 1.3.6.1.4.1.738.10.6.1.1.3.2.5.1.15 | Counter64 | RO | |
column · Counter64 · read-only · current The rate, in bytes per second, of traffic matching this traffic flow. | ||||
| CprvtSwAclIfAcgMonPrfRateGreenF | 1.3.6.1.4.1.738.10.6.1.1.3.2.5.1.16 | Counter64 | RO | |
column · Counter64 · read-only · current The rate, in frames per second, of green traffic belonging to this traffic flow. | ||||
| CprvtSwAclIfAcgMonPrfRateGreenB | 1.3.6.1.4.1.738.10.6.1.1.3.2.5.1.17 | Counter64 | RO | |
column · Counter64 · read-only · current The rate, in bytes per second, of green traffic belonging to this traffic flow. | ||||
| CprvtSwAclIfAcgMonPrfRateNotGreenF | 1.3.6.1.4.1.738.10.6.1.1.3.2.5.1.18 | Counter64 | RO | |
column · Counter64 · read-only · current The rate, in frames per second, of non-green traffic belonging to this traffic flow. | ||||
| CprvtSwAclIfAcgMonPrfRateNotGreenB | 1.3.6.1.4.1.738.10.6.1.1.3.2.5.1.19 | Counter64 | RO | |
column · Counter64 · read-only · current The rate, in bytes per second, of non-green traffic belonging to this traffic flow. | ||||
| CprvtSwAclIfAcgMonPrfRateYellowF | 1.3.6.1.4.1.738.10.6.1.1.3.2.5.1.20 | Counter64 | RO | |
column · Counter64 · read-only · current The rate, in frames per second, of yellow traffic belonging to this traffic flow. | ||||
| CprvtSwAclIfAcgMonPrfRateYellowB | 1.3.6.1.4.1.738.10.6.1.1.3.2.5.1.21 | Counter64 | RO | |
column · Counter64 · read-only · current The rate, in bytes per second, of yellow traffic belonging to this traffic flow. | ||||
| CprvtSwAclIfAcgMonPrfRateRedF | 1.3.6.1.4.1.738.10.6.1.1.3.2.5.1.22 | Counter64 | RO | |
column · Counter64 · read-only · current The rate, in frames per second, of red traffic belonging to this traffic flow. | ||||
| CprvtSwAclIfAcgMonPrfRateRedB | 1.3.6.1.4.1.738.10.6.1.1.3.2.5.1.23 | Counter64 | RO | |
column · Counter64 · read-only · current The rate, in bytes per second, of red traffic belonging to this traffic flow. | ||||
| CprvtSwAclIfAcgMonPrfRateNotRedF | 1.3.6.1.4.1.738.10.6.1.1.3.2.5.1.24 | Counter64 | RO | |
column · Counter64 · read-only · current The rate, in frames per second, of non-red traffic belonging to this traffic flow. | ||||
| CprvtSwAclIfAcgMonPrfRateNotRedB | 1.3.6.1.4.1.738.10.6.1.1.3.2.5.1.25 | Counter64 | RO | |
column · Counter64 · read-only · current The rate, in bytes per second, of non-red traffic belonging to this traffic flow. | ||||
| TprvtSwAclIfAcgRestrictEgForwardingTable | 1.3.6.1.4.1.738.10.6.1.1.3.2.6 | NA | ||
table · not-accessible · current Used to specify if this traffic flow should be forwarded to another interface.All the other interfaces will be blocked. Only applicable to ingress ACL types (when prvtSwAclIfAcgAclType equals 'in'). | ||||
| RprvtSwAclIfAcgRestrictEgForwardingEntry | 1.3.6.1.4.1.738.10.6.1.1.3.2.6.1 | NA | ||
row · not-accessible · current An entry in prvtSwAclIfAcgRestrictEgForwardingTable. | ||||
| CprvtSwAclIfAcgRestrictEgForwIfIndex | 1.3.6.1.4.1.738.10.6.1.1.3.2.6.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex of a physical interface defined in the ifTable to which traffic should be forwared to. | ||||
| CprvtSwAclIfAcgRestrictEgForwRowStatus | 1.3.6.1.4.1.738.10.6.1.1.3.2.6.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for prvtSwAclIfAcgRestrictEgForwardingTable. | ||||
| NprvtSwAclSaps | 1.3.6.1.4.1.738.10.6.1.1.4 | |||
| TprvtSwAclSapAcgTable | 1.3.6.1.4.1.738.10.6.1.1.4.1 | NA | ||
table · not-accessible · current This table creates and controls the properties of traffic flows belonging to SAP interfaces. Up to 250 entries are supported per SAP (i.e. per prvtSwAclSapServiceId, prvtSwAclSapIfIndex, prvtSwAclSapEncapValue combination). The key combination (serviceId, sapPortId, sapEncapValue, prvtSwAclSapAcgSeqId) must be unique (i.e. no more than one entry can exist with the same SAP and sequence-id combination). Notes: 1. access-groups are not supported on VPWS SAPs. 2. Only ingress ACL types (prvtSwAclSapAcgAclType equals 'in') are supported on SAPs. | ||||
| RprvtSwAclSapAcgEntry | 1.3.6.1.4.1.738.10.6.1.1.4.1.1 | NA | ||
row · not-accessible · current An entry in prvtSwAclSapAcgTable. | ||||
| CprvtSwAclSapAcgSeqId | 1.3.6.1.4.1.738.10.6.1.1.4.1.1.4 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current Specifies the sequence (order/priority) in which this access group will be applied. | ||||
| CprvtSwAclSapAcgType | 1.3.6.1.4.1.738.10.6.1.1.4.1.1.5 | PrvtSwAclAcgType | NA | |
column · PrvtSwAclAcgType · not-accessible · current The type (e.g. ipStd, ipExt, mac, etherType) of access group that this row applies to. | ||||
| CprvtSwAclSapAcgAclName | 1.3.6.1.4.1.738.10.6.1.1.4.1.1.6 | PrvtSwAclNameType | NA | |
column · PrvtSwAclNameType · not-accessible · current The name of the access list that this row applies to. This must match the name of an ACL created with the type specified by prvtSwAclSapAcgType. (i.e. it must match one of prvtSwAclStdName, prvtSwAclExtName, prvtSwAclMacName, prvtSwAclEthName corresponding to the type specified in prvtSwAclSapAcgType.) | ||||
| CprvtSwAclSapAcgAclType | 1.3.6.1.4.1.738.10.6.1.1.4.1.1.7 | PrvtSwAclGroupType | NA | |
column · PrvtSwAclGroupType · not-accessible · current The type (e.g. in, out, vlan) of access list that this row applies to. | ||||
| CprvtSwAclSapAcgRowStatus | 1.3.6.1.4.1.738.10.6.1.1.4.1.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for this SAP's access-control group. | ||||
| CprvtSwAclSapAcgColorGreenFc | 1.3.6.1.4.1.738.10.6.1.1.4.1.1.13 | PrvtSwAclFcTypeOrNone | RC | |
column · PrvtSwAclFcTypeOrNone · read-create · current Map traffic marked as green from the ACG rate-limit to a Forwarding Class (FC). The value 'none' indicates that the FC is not to be affected. Only used when prvtSwAclSapAcgGroupType equals 'in'. | ||||
| CprvtSwAclSapAcgColorYellowFc | 1.3.6.1.4.1.738.10.6.1.1.4.1.1.14 | PrvtSwAclFcTypeOrNone | RC | |
column · PrvtSwAclFcTypeOrNone · read-create · current Map traffic marked as yellow from ACG rate-limit to a Forwarding Class (FC). The value 'none' indicates that the FC is not to be affected. Only used when prvtSwAclSapAcgGroupType equals 'in'. | ||||
| CprvtSwAclSapAcgColorRedFc | 1.3.6.1.4.1.738.10.6.1.1.4.1.1.15 | PrvtSwAclFcTypeOrNone | RC | |
column · PrvtSwAclFcTypeOrNone · read-create · current Map traffic marked as red from ACG rate-limit to a Forwarding Class (FC). The value 'none' indicates that the FC is not to be affected. Only used when prvtSwAclSapAcgGroupType equals 'in'. | ||||
| CprvtSwAclSapAcgResetStats | 1.3.6.1.4.1.738.10.6.1.1.4.1.1.16 | TruthValue | RC | |
column · TruthValue · read-create · current Set to 'true' to reset the statistics for this SAP access group. Reads always return the value 'false'. | ||||
| NprvtSwAclSapAcg | 1.3.6.1.4.1.738.10.6.1.1.4.2 | |||
| TprvtSwAclSapAcgRLimitTable | 1.3.6.1.4.1.738.10.6.1.1.4.2.2 | NA | ||
table · not-accessible · current Used to specify for this traffic flow which type of rate-limiting to use and the parameters of the rate-limiting method. Only one entry may exist (i.e. one rate-limiting method may be used) for a particular traffic flow. Not available for VLAN ACL types (when prvtSwAclSapAcgAclType equals 'vlan'). For a particular traffic flow, this table and prvtSwAclSapAcgFcTable are mutually exclusive (i.e. a traffic flow is prohibited from having an entry in this table and in prvtSwAclSapAcgFcTable concurrently). | ||||
| RprvtSwAclSapAcgRLimitEntry | 1.3.6.1.4.1.738.10.6.1.1.4.2.2.1 | NA | ||
row · not-accessible · current An entry in prvtSwAclSapAcgRLimitTable. | ||||
| CprvtSwAclSapAcgRLimitType | 1.3.6.1.4.1.738.10.6.1.1.4.2.2.1.1 | PrvtSwAclRateLimitType | NA | |
column · PrvtSwAclRateLimitType · not-accessible · current Specifies the type (single vs. dual) of rate-limiting to use. | ||||
| CprvtSwAclSapAcgRLimitRowStatus | 1.3.6.1.4.1.738.10.6.1.1.4.2.2.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for this rate limit function. | ||||
| CprvtSwAclSapAcgRLimitCir | 1.3.6.1.4.1.738.10.6.1.1.4.2.2.1.3 | PrvtSwAclRateType | RC | |
column · PrvtSwAclRateType · read-create · current The Committed Information Rate. | ||||
| CprvtSwAclSapAcgRLimitCbs | 1.3.6.1.4.1.738.10.6.1.1.4.2.2.1.4 | PrvtSwAclBurstSizeType | RC | |
column · PrvtSwAclBurstSizeType · read-create · current The Committed Burst Size. | ||||
| CprvtSwAclSapAcgRLimitEbs | 1.3.6.1.4.1.738.10.6.1.1.4.2.2.1.5 | PrvtSwAclBurstSizeType | RC | |
column · PrvtSwAclBurstSizeType · read-create · current The Excess Burst Size. Only applicable when using single rate limiting (prvtSwAclSapAcgRLimitType equals 'single'). | ||||
| CprvtSwAclSapAcgRLimitPir | 1.3.6.1.4.1.738.10.6.1.1.4.2.2.1.6 | PrvtSwAclRateType | RC | |
column · PrvtSwAclRateType · read-create · current The Peak Information Rate. Only applicable when using dual rate limiting (prvtSwAclSapAcgRLimitType equals 'dual'). When using dual rate limiting, prvtSwAclSapAcgRLimitPir must be greater than or equal to prvtSwAclSapAcgRLimitCir. | ||||
| CprvtSwAclSapAcgRLimitPbs | 1.3.6.1.4.1.738.10.6.1.1.4.2.2.1.7 | PrvtSwAclBurstSizeType | RC | |
column · PrvtSwAclBurstSizeType · read-create · current The Peak Burst Size. Only applicable when using dual rate limiting (when prvtSwAclSapAcgRLimitType equals 'dual'). | ||||
| CprvtSwAclSapAcgRLimitColorAware | 1.3.6.1.4.1.738.10.6.1.1.4.2.2.1.8 | TruthValue | RC | |
column · TruthValue · read-create · current Set to 'true' to enable color aware traffic metering. | ||||
| CprvtSwAclSapAcgRLimitExceedAct | 1.3.6.1.4.1.738.10.6.1.1.4.2.2.1.9 | PrvtSwAclExceedAction | RC | |
column · PrvtSwAclExceedAction · read-create · current The action to perform when the condition is true. | ||||
| TprvtSwAclSapAcgRedirectTable | 1.3.6.1.4.1.738.10.6.1.1.4.2.3 | NA | ||
table · not-accessible · current Used to specify if this traffic flow should be redirected to another interface. Only one entry is allowed (i.e. only one redirect is permitted). Only applicable to ingress ACL types (when prvtSwAclSapAcgAclType equals 'in'). | ||||
| RprvtSwAclSapAcgRedirectEntry | 1.3.6.1.4.1.738.10.6.1.1.4.2.3.1 | NA | ||
row · not-accessible · current An entry in prvtSwAclSapAcgRedirectTable. | ||||
| CprvtSwAclSapAcgRedirectIfIndex | 1.3.6.1.4.1.738.10.6.1.1.4.2.3.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex of a physical interface defined in the ifTable to which traffic should be redirected to. | ||||
| CprvtSwAclSapAcgRedirectRowStatus | 1.3.6.1.4.1.738.10.6.1.1.4.2.3.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for prvtSwAclSapAcgRedirectTable. | ||||
| TprvtSwAclSapAcgFcTable | 1.3.6.1.4.1.738.10.6.1.1.4.2.4 | NA | ||
table · not-accessible · current Used to assign parameters to a particular forwarding class within a traffic flow. Only one entry is allowed. Only applicable to ingress ACL types (when prvtSwAclSapAcgAclType equals 'in'). For a particular traffic flow, this table and prvtSwAclSapAcgRLimitTable are mutually exclusive (i.e. a traffic flow is prohibited from having an entry in this table and in prvtSwAclSapAcgFcTable at the same time). | ||||
| RprvtSwAclSapAcgFcEntry | 1.3.6.1.4.1.738.10.6.1.1.4.2.4.1 | NA | ||
row · not-accessible · current An entry in prvtSwAclSapAcgFcTable. | ||||
| CprvtSwAclSapAcgFcId | 1.3.6.1.4.1.738.10.6.1.1.4.2.4.1.1 | PrvtSwAclFcType | NA | |
column · PrvtSwAclFcType · not-accessible · current The forwarding class that this row applies to. | ||||
| CprvtSwAclSapAcgFcRowStatus | 1.3.6.1.4.1.738.10.6.1.1.4.2.4.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for this forwarding class. | ||||
| CprvtSwAclSapAcgFcColor | 1.3.6.1.4.1.738.10.6.1.1.4.2.4.1.3 | PrvtSwAclColorType | RC | |
column · PrvtSwAclColorType · read-create · current The color to assign to traffic belonging to this forwarding class. Color red is not supported for all devices | ||||
| TprvtSwAclSapAcgMonPrfTable | 1.3.6.1.4.1.738.10.6.1.1.4.2.5 | NA | ||
table · not-accessible · current Used to assign a monitoring profile to a traffic flow. Only one profile may be assigned per traffic flow. Only applicable to ingress ACL types (when prvtSwAclSapAcgAclType equals 'in'). | ||||
| RprvtSwAclSapAcgMonPrfEntry | 1.3.6.1.4.1.738.10.6.1.1.4.2.5.1 | NA | ||
row · not-accessible · current An entry in prvtSwAclSapAcgMonPrfTable. | ||||
| CprvtSwAclSapAcgMonPrfRowStatus | 1.3.6.1.4.1.738.10.6.1.1.4.2.5.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for this monitoring profile. | ||||
| CprvtSwAclSapAcgMonPrfMatchF | 1.3.6.1.4.1.738.10.6.1.1.4.2.5.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current The number of frames of traffic matching this traffic flow. | ||||
| CprvtSwAclSapAcgMonPrfMatchB | 1.3.6.1.4.1.738.10.6.1.1.4.2.5.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current The number of bytes of traffic matching this traffic flow. | ||||
| CprvtSwAclSapAcgMonPrfGreenF | 1.3.6.1.4.1.738.10.6.1.1.4.2.5.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current The number of frames of green traffic belonging to this traffic flow. | ||||
| CprvtSwAclSapAcgMonPrfGreenB | 1.3.6.1.4.1.738.10.6.1.1.4.2.5.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current The number of bytes of green traffic belonging to this traffic flow. | ||||
| CprvtSwAclSapAcgMonPrfNotGreenF | 1.3.6.1.4.1.738.10.6.1.1.4.2.5.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current The number of frames of non-green traffic belonging to this traffic flow. | ||||
| CprvtSwAclSapAcgMonPrfNotGreenB | 1.3.6.1.4.1.738.10.6.1.1.4.2.5.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current The number of bytes of non-green traffic belonging to this traffic flow. | ||||
| CprvtSwAclSapAcgMonPrfYellowF | 1.3.6.1.4.1.738.10.6.1.1.4.2.5.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current The number of frames of yellow traffic belonging to this traffic flow. | ||||
| CprvtSwAclSapAcgMonPrfYellowB | 1.3.6.1.4.1.738.10.6.1.1.4.2.5.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current The number of bytes of yellow traffic belonging to this traffic flow. | ||||
| CprvtSwAclSapAcgMonPrfRedF | 1.3.6.1.4.1.738.10.6.1.1.4.2.5.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current The number of frames of red traffic belonging to this traffic flow. | ||||
| CprvtSwAclSapAcgMonPrfRedB | 1.3.6.1.4.1.738.10.6.1.1.4.2.5.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current The number of bytes of red traffic belonging to this traffic flow. | ||||
| CprvtSwAclSapAcgMonPrfNotRedF | 1.3.6.1.4.1.738.10.6.1.1.4.2.5.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current The number of frames of non-red traffic belonging to this traffic flow. | ||||
| CprvtSwAclSapAcgMonPrfNotRedB | 1.3.6.1.4.1.738.10.6.1.1.4.2.5.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current The number of bytes of non-red traffic belonging to this traffic flow. | ||||
| CprvtSwAclSapAcgMonPrfRateMatchF | 1.3.6.1.4.1.738.10.6.1.1.4.2.5.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current The rate, in frames per second, of traffic matching this traffic flow. | ||||
| CprvtSwAclSapAcgMonPrfRateMatchB | 1.3.6.1.4.1.738.10.6.1.1.4.2.5.1.15 | Counter64 | RO | |
column · Counter64 · read-only · current The rate, in bytes per second, of traffic matching this traffic flow. | ||||
| CprvtSwAclSapAcgMonPrfRateGreenF | 1.3.6.1.4.1.738.10.6.1.1.4.2.5.1.16 | Counter64 | RO | |
column · Counter64 · read-only · current The rate, in frames per second, of green traffic belonging to this traffic flow. | ||||
| CprvtSwAclSapAcgMonPrfRateGreenB | 1.3.6.1.4.1.738.10.6.1.1.4.2.5.1.17 | Counter64 | RO | |
column · Counter64 · read-only · current The rate, in bytes per second, of green traffic belonging to this traffic flow. | ||||
| CprvtSwAclSapAcgMonPrfRateNotGreenF | 1.3.6.1.4.1.738.10.6.1.1.4.2.5.1.18 | Counter64 | RO | |
column · Counter64 · read-only · current The rate, in frames per second, of non-green traffic belonging to this traffic flow. | ||||
| CprvtSwAclSapAcgMonPrfRateNotGreenB | 1.3.6.1.4.1.738.10.6.1.1.4.2.5.1.19 | Counter64 | RO | |
column · Counter64 · read-only · current The rate, in bytes per second, of non-green traffic belonging to this traffic flow. | ||||
| CprvtSwAclSapAcgMonPrfRateYellowF | 1.3.6.1.4.1.738.10.6.1.1.4.2.5.1.20 | Counter64 | RO | |
column · Counter64 · read-only · current The rate, in frames per second, of yellow traffic belonging to this traffic flow. | ||||
| CprvtSwAclSapAcgMonPrfRateYellowB | 1.3.6.1.4.1.738.10.6.1.1.4.2.5.1.21 | Counter64 | RO | |
column · Counter64 · read-only · current The rate, in bytes per second, of yellow traffic belonging to this traffic flow. | ||||
| CprvtSwAclSapAcgMonPrfRateRedF | 1.3.6.1.4.1.738.10.6.1.1.4.2.5.1.22 | Counter64 | RO | |
column · Counter64 · read-only · current The rate, in frames per second, of red traffic belonging to this traffic flow. | ||||
| CprvtSwAclSapAcgMonPrfRateRedB | 1.3.6.1.4.1.738.10.6.1.1.4.2.5.1.23 | Counter64 | RO | |
column · Counter64 · read-only · current The rate, in bytes per second, of red traffic belonging to this traffic flow. | ||||
| CprvtSwAclSapAcgMonPrfRateNotRedF | 1.3.6.1.4.1.738.10.6.1.1.4.2.5.1.24 | Counter64 | RO | |
column · Counter64 · read-only · current The rate, in frames per second, of non-red traffic belonging to this traffic flow. | ||||
| CprvtSwAclSapAcgMonPrfRateNotRedB | 1.3.6.1.4.1.738.10.6.1.1.4.2.5.1.25 | Counter64 | RO | |
column · Counter64 · read-only · current The rate, in bytes per second, of non-red traffic belonging to this traffic flow. | ||||
| TprvtSwAclSapAcgRestrictEgForwardingTable | 1.3.6.1.4.1.738.10.6.1.1.4.2.6 | NA | ||
table · not-accessible · current Used to specify if this traffic flow should be forwarded to another interface.All the other interfaces will be blocked. Only applicable to ingress ACL types (when prvtSwAclSapAcgAclType equals 'in'). | ||||
| RprvtSwAclSapAcgRestrictEgForwardingEntry | 1.3.6.1.4.1.738.10.6.1.1.4.2.6.1 | NA | ||
row · not-accessible · current An entry in prvtSwAclSapAcgRestrictEgForwardingTable. | ||||
| CprvtSwAclSapAcgRestrictEgForwIfIndex | 1.3.6.1.4.1.738.10.6.1.1.4.2.6.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex of a physical interface defined in the ifTable to which traffic should be forwared to. | ||||
| CprvtSwAclSapAcgRestrictEgForwRowStatus | 1.3.6.1.4.1.738.10.6.1.1.4.2.6.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for prvtSwAclSapAcgRestrictEgForwardingTable. | ||||
Textual conventions
PrvtSwAclAcgTypeINTEGERetherType(3)ipExt(1)ipStd(0)mac(2)Types of access groups.
PrvtSwAclActionINTEGERdeny(1)permit(0)An action to take when an access-list condition is asserted.
PrvtSwAclBurstSizeTypeUnsigned32Display hint:
dA burst size in kilobits (1000 bits).
PrvtSwAclColorTypeINTEGERgreen(1)red(3)yellow(2)Traffic color assignments.
PrvtSwAclDescrTypeOCTET STRING (SIZE (0..30))Display hint:
30aA description string for an item.
PrvtSwAclDscpTypeOrNoneUnsigned32 (0..64)Display hint:
dAn IPv4 DiffServ Code Point value. The value '64' indicates 'no value' and its behavior differs depending upon the object (e.g. could indicate that the DSCP field is ignored or could indicate that the DSCP field is unaffected.)
PrvtSwAclEtherTypeOCTET STRING (SIZE (2))Display hint:
1x:1xAn EtherType value.
PrvtSwAclEtherTypeMaskOCTET STRING (SIZE (2))Display hint:
1x:1xA mask to apply to an EtherType value (PrvtSwAclEtherType). Currently, only values of '0000' and 'FFFF' are permitted. The value '0000' represents that no mask is applied (i.e traffic must match the EtherType value exactly). The value 'FFFF' represents no restriction by EtherType (i.e. match any value).
PrvtSwAclExceedActionINTEGERdrop(3)markRed(2)markYellow(1)noAction(0)An action to take when a limit is exceeded.
PrvtSwAclFcTypeINTEGERaf(3)be(1)ef(6)h1(7)h2(5)l1(4)l2(2)nc(8)Types of forwarding classes.
PrvtSwAclFcTypeOrNoneINTEGERaf(3)be(1)ef(6)h1(7)h2(5)l1(4)l2(2)nc(8)none(0)A forwarding class value. The value 'none' indicates 'no value' (the FC field is not affected).
PrvtSwAclGroupTypeINTEGERin(1)out(2)vlan(3)Access list group types.
PrvtSwAclIpProtocolInteger32 (0..255)Display hint:
dThe protocol number as defined in the IP datagram header.
PrvtSwAclIpv4PrefixTypeOCTET STRING (SIZE (5))Display hint:
1d.1d.1d.1d/1dAn IPv4 address prefix defining a subnet. The value 255.255.255.255/0 will match all IPv4 traffic.
PrvtSwAclMatchTrafficTypeINTEGERany(0)broadcast(5)knownMulticast(4)knownUnicast(2)unknownMulticast(3)unknownUnicast(1)Types of traffic to match.
PrvtSwAclNameTypeOCTET STRING (SIZE (1..10))Display hint:
10aThe name of an Access Control List.
PrvtSwAclPortIdTypeOrNoneInteger32 (-1..65535)Display hint:
dA UDP/TCP port number. The value '-1' indicates that the object has no port ID assigned to it.
PrvtSwAclPrecedenceTypeOrNoneINTEGERcritical(5)flash(3)flashOverride(4)immediate(2)internet(6)network(7)none(8)priority(1)routine(0)An IPv4 precedence value. The value '8' indicates 'no value' (the Precedence field is ignored.)
PrvtSwAclProfileIdTypeInteger32 (0..65535)Display hint:
dA monitoring profile identifier.
PrvtSwAclRateLimitTypeINTEGERdual(2)single(1)Types of rate limiting.
PrvtSwAclRateTypeUnsigned32Display hint:
dA rate in kilobits per second (1000 bits/s).
PrvtSwAclRuleIdTypeUnsigned32 (1..255)Display hint:
dAn Access Control List rule identifier.
PrvtSwAclStatsTypeINTEGERbwMonGreenNotGreenBytes(18)bwMonGreenNotGreenFrames(17)bwMonGreenRedBytes(20)bwMonGreenRedFrames(19)bwMonGreenYellowBytes(22)bwMonGreenYellowFrames(21)bwMonMatchCounterBytes(14)bwMonMatchCounterFrames(13)bwMonRedNotRedBytes(16)bwMonRedNotRedFrames(15)bwMonRedYellowBytes(24)bwMonRedYellowFrames(23)matchCounterBytes(2)matchCounterFrames(1)rateLimitGreenNotGreenBytes(6)rateLimitGreenNotGreenFrames(5)rateLimitGreenRedBytes(8)rateLimitGreenRedFrames(7)rateLimitGreenYellowBytes(10)rateLimitGreenYellowFrames(9)rateLimitRedNotRedBytes(4)rateLimitRedNotRedFrames(3)rateLimitRedYellowBytes(12)rateLimitRedYellowFrames(11)Types of statistics to monitor.
PrvtSwAclTagTypeINTEGERtagged(1)untagged(2)Tag for an interface.
PrvtSwAclTosTypeOrNoneUnsigned32 (0..16)Display hint:
dAn IPv4 Type Of Service value. The value '16' indicates 'no value' (the TOS field is ignored.)
PrvtSwAclVlanIdTypeOrNoneInteger32 (0..4095)Display hint:
dA VLAN identifier. The value '0' indicates 'no value' and its behavior differs depending upon the object.
PrvtSwAclVlanMaskTypeOCTET STRING (SIZE (4))Display hint:
1x:1x:1x:1xA VLAN mask. A '1' in a bit position will result in the corresponding bit in the VLAN ID becoming 'don't care' (i.e. always match).
PrvtSwAclVptTypeOrNoneUnsigned32 (0..8)Display hint:
dA VLAN priority tag value. The value '8' indicates 'no value' and its behavior differs depending upon the object (e.g. could indicate that the VPT field is ignored or could indicate that the VPT field is unaffected.)
Traps / Notifications
- prvtSwAclIfAcgApplyFailed
1.3.6.1.4.1.738.10.6.1.0.1 - prvtSwAclIfAcgFcApplyFailed
1.3.6.1.4.1.738.10.6.1.0.4 - prvtSwAclIfAcgMonPrfApplyFailed
1.3.6.1.4.1.738.10.6.1.0.5 - prvtSwAclIfAcgRLimitApplyFailed
1.3.6.1.4.1.738.10.6.1.0.2 - prvtSwAclIfAcgRedirectApplyFailed
1.3.6.1.4.1.738.10.6.1.0.3 - prvtSwAclSapAcgApplyFailed
1.3.6.1.4.1.738.10.6.1.0.6 - prvtSwAclSapAcgFcApplyFailed
1.3.6.1.4.1.738.10.6.1.0.9 - prvtSwAclSapAcgMonPrfApplyFailed
1.3.6.1.4.1.738.10.6.1.0.10 - prvtSwAclSapAcgRLimitApplyFailed
1.3.6.1.4.1.738.10.6.1.0.7 - prvtSwAclSapAcgRedirectApplyFailed
1.3.6.1.4.1.738.10.6.1.0.8