PRVT-LMM-MIB
B.A.T.M. Advance TechnologiesInitial version. This MIB will configure laser monitoring
snmptranslate -m PRVT-LMM-MIB -Tpsnmpwalk -v2c -c <community> -m PRVT-LMM-MIB <host> 1.3.6.1.4.1.738.10.5.172Imports
| IF-MIB | ifIndex |
|---|---|
| PRVT-SWITCH-MIB | switch |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IprvtLmmMIB | 1.3.6.1.4.1.738.10.5.172 | |||
identity Initial version. This MIB will configure laser monitoring | ||||
| NprvtLmmNotifications | 1.3.6.1.4.1.738.10.5.172.0 | |||
| !prvtLmmTemperatureThresholdCrossed | 1.3.6.1.4.1.738.10.5.172.0.1 | |||
notification · current The prvtLmmTemperatureThresholdCrossed shall be generated when prvtLmmInterfaceTempValue rises above prvtLmmInterfaceTempThresholdHi or falls below prvtLmmInterfaceTempThresholdLo. Also the notification shall be generated when prvtLmmInterfaceTempValue returns to the normal range between prvtLmmInterfaceTempThresholdHi and prvtLmmInterfaceTempThresholdLo. | ||||
| !prvtLmmTxPowerThresholdCrossed | 1.3.6.1.4.1.738.10.5.172.0.2 | |||
notification · current The prvtLmmTxPowerThresholdCrossed shall be generated when prvtLmmInterfaceTxPowerValue rises above prvtLmmInterfaceTxPowerThresholdTxHi or falls below prvtLmmInterfaceTxPowerThresholdTxLo. Also the notification shall be generated when prvtLmmInterfaceTxPowerValue returns to the normal range between prvtLmmInterfaceTxPowerThresholdTxHi and prvtLmmInterfaceTxPowerThresholdTxLo. | ||||
| !prvtLmmRxPowerThresholdCrossed | 1.3.6.1.4.1.738.10.5.172.0.3 | |||
notification · current The prvtLmmRxPowerThresholdCrossed shall be generated when prvtLmmInterfaceRxPowerValue rises above prvtLmmInterfaceRxPowerThresholdRxHi or falls below prvtLmmInterfaceRxPowerThresholdRxLo. Also the notification shall be generated when prvtLmmInterfaceRxPowerValue returns to the normal range between prvtLmmInterfaceRxPowerThresholdRxHi and prvtLmmInterfaceRxPowerThresholdRxLo. | ||||
| NprvtLmmObjects | 1.3.6.1.4.1.738.10.5.172.1 | |||
| SprvtLmmShutdown | 1.3.6.1.4.1.738.10.5.172.1.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current Enable/disable laser monitoring | ||||
| SprvtLmmDebug | 1.3.6.1.4.1.738.10.5.172.1.2 | TruthValue | RW | |
scalar · TruthValue · read-write · current Enable/Disable laser monitoring | ||||
| SprvtLmmPeriod | 1.3.6.1.4.1.738.10.5.172.1.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current Specify the monitoring interval (sec). | ||||
| SprvtLmmTrap | 1.3.6.1.4.1.738.10.5.172.1.4 | TruthValue | RW | |
scalar · TruthValue · read-write · current Enable/Disable sending SNMP traps when thresholds are crossed | ||||
| SprvtLmmLog | 1.3.6.1.4.1.738.10.5.172.1.5 | TruthValue | RW | |
scalar · TruthValue · read-write · current Enable/Disable alert notification logging when thresholds are crossed | ||||
| SprvtLmmLed | 1.3.6.1.4.1.738.10.5.172.1.6 | TruthValue | RW | |
scalar · TruthValue · read-write · current Enable/Disable LED-alert notifications when thresholds are crossed | ||||
| SprvtLmmTemperatureHighThreshold | 1.3.6.1.4.1.738.10.5.172.1.7 | Integer32 (-128..128) | RW | |
scalar · Integer32 (-128..128) · read-write · current Specify the low threshold value for global temperature (-128 up to 128). prvtLmmTemperatureHighThreshold must be higher than prvtLmmTemperatureLowThreshold | ||||
| SprvtLmmTemperatureLowThreshold | 1.3.6.1.4.1.738.10.5.172.1.8 | Integer32 (-128..128) | RW | |
scalar · Integer32 (-128..128) · read-write · current Specify the low threshold value for global temperature (-128 up to 128). prvtLmmTemperatureHighThreshold must be higher than prvtLmmTemperatureLowThreshold | ||||
| SprvtLmmRxPowerLowThreshold | 1.3.6.1.4.1.738.10.5.172.1.9 | Integer32 (-40..8) | RW | |
scalar · Integer32 (-40..8) · read-write · current Specify the low threshold value for global RX-power (-40 up to 8) prvtLmmRxPowerHighThreshold must be higher than prvtLmmRxPowerLowThreshold | ||||
| SprvtLmmRxPowerHighThreshold | 1.3.6.1.4.1.738.10.5.172.1.10 | Integer32 (-40..8) | RW | |
scalar · Integer32 (-40..8) · read-write · current Specify the high threshold value for global RX-power (-40 up to 8) prvtLmmRxPowerHighThreshold must be higher than prvtLmmRxPowerLowThreshold | ||||
| SprvtLmmTxPowerLowThreshold | 1.3.6.1.4.1.738.10.5.172.1.11 | Integer32 (-40..8) | RW | |
scalar · Integer32 (-40..8) · read-write · current Specify the low threshold value for global RX-power (-40 up to 8) prvtLmmTxPowerHighThreshold must be higher than prvtLmmTxPowerLowThreshold | ||||
| SprvtLmmTxPowerHighThreshold | 1.3.6.1.4.1.738.10.5.172.1.12 | Integer32 (-40..8) | RW | |
scalar · Integer32 (-40..8) · read-write · current Specify the high threshold value for global RX-power (-40 up to 8) prvtLmmTxPowerHighThreshold must be higher than prvtLmmTxPowerLowThreshold | ||||
| TprvtLmmInterfaceTable | 1.3.6.1.4.1.738.10.5.172.1.13 | NA | ||
table · not-accessible · current Lmm configuration per ethernet port | ||||
| RprvtLmmInterfaceEntry | 1.3.6.1.4.1.738.10.5.172.1.13.1 | NA | ||
| CprvtLmmInterfaceShutdown | 1.3.6.1.4.1.738.10.5.172.1.13.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current Enable/Disable laser monitoring on port | ||||
| CprvtLmmInterfaceTempLowThreshold | 1.3.6.1.4.1.738.10.5.172.1.13.1.2 | Integer32 (-128..128) | RW | |
column · Integer32 (-128..128) · read-write · current Specify the low threshold value for port temperature | ||||
| CprvtLmmInterfaceTempHighThreshold | 1.3.6.1.4.1.738.10.5.172.1.13.1.3 | Integer32 (-128..128) | RW | |
column · Integer32 (-128..128) · read-write · current Specify the high threshold value for port temperature. Value of prvtLmmInterfaceTempHighThreshold must be greater than prvtLmmInterfaceTempLowThreshold | ||||
| CprvtLmmInterfaceTempValue | 1.3.6.1.4.1.738.10.5.172.1.13.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Display laser Temperature current value | ||||
| CprvtLmmInterfaceTempThresholdLo | 1.3.6.1.4.1.738.10.5.172.1.13.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The thresholds read from hardware or set by user | ||||
| CprvtLmmInterfaceTempThresholdHi | 1.3.6.1.4.1.738.10.5.172.1.13.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The thresholds read from hardware or set by user | ||||
| CprvtLmmInterfaceTempTestState | 1.3.6.1.4.1.738.10.5.172.1.13.1.7 | TruthValue | RO | |
column · TruthValue · read-only · current The state test | ||||
| CprvtLmmInterfaceRxPowerLowThreshold | 1.3.6.1.4.1.738.10.5.172.1.13.1.8 | Integer32 (-40..8) | RW | |
column · Integer32 (-40..8) · read-write · current Specify the low threshold value for port RX-power. | ||||
| CprvtLmmInterfaceRxPowerHighThreshold | 1.3.6.1.4.1.738.10.5.172.1.13.1.9 | Integer32 (-40..8) | RW | |
column · Integer32 (-40..8) · read-write · current Specify the high threshold value for port RX-power. Value of prvtLmmInterfaceRxPowerHighThreshold must be greater than prvtLmmInterfaceRxPowerLowThreshold | ||||
| CprvtLmmInterfaceRxPowerValue | 1.3.6.1.4.1.738.10.5.172.1.13.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current Display laser Rx Power current value | ||||
| CprvtLmmInterfaceRxPowerThresholdRxLo | 1.3.6.1.4.1.738.10.5.172.1.13.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current The thresholds read from hardware or set by user | ||||
| CprvtLmmInterfaceRxPowerThresholdRxHi | 1.3.6.1.4.1.738.10.5.172.1.13.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current The thresholds read from hardware or set by user | ||||
| CprvtLmmInterfaceRxPowerTestState | 1.3.6.1.4.1.738.10.5.172.1.13.1.13 | TruthValue | RO | |
column · TruthValue · read-only · current The state test | ||||
| CprvtLmmInterfaceTxPowerLowThreshold | 1.3.6.1.4.1.738.10.5.172.1.13.1.14 | Integer32 (-40..8) | RW | |
column · Integer32 (-40..8) · read-write · current Specify the low threshold value for port TX-power | ||||
| CprvtLmmInterfaceTxPowerHighThreshold | 1.3.6.1.4.1.738.10.5.172.1.13.1.15 | Integer32 (-40..8) | RW | |
column · Integer32 (-40..8) · read-write · current Specify the high threshold value for port TX-power Value of prvtLmmInterfaceTxPowerHighThreshold must be greater than prvtLmmInterfaceTxPowerLowThreshold | ||||
| CprvtLmmInterfaceTxPowerValue | 1.3.6.1.4.1.738.10.5.172.1.13.1.16 | Integer32 | RO | |
column · Integer32 · read-only · current Display laser Tx Power current value | ||||
| CprvtLmmInterfaceTxPowerThresholdTxLo | 1.3.6.1.4.1.738.10.5.172.1.13.1.17 | Integer32 | RO | |
column · Integer32 · read-only · current The thresholds read from hardware or set by user | ||||
| CprvtLmmInterfaceTxPowerThresholdTxHi | 1.3.6.1.4.1.738.10.5.172.1.13.1.18 | Integer32 | RO | |
column · Integer32 · read-only · current The thresholds read from hardware or set by user | ||||
| CprvtLmmInterfaceTxPowerTestState | 1.3.6.1.4.1.738.10.5.172.1.13.1.19 | TruthValue | RO | |
column · TruthValue · read-only · current The state test | ||||
| CprvtLmmInterfaceOperStatus | 1.3.6.1.4.1.738.10.5.172.1.13.1.20 | TruthValue | RO | |
column · TruthValue · read-only · current Operational status | ||||
Traps / Notifications
- prvtLmmRxPowerThresholdCrossed
1.3.6.1.4.1.738.10.5.172.0.3 - prvtLmmTemperatureThresholdCrossed
1.3.6.1.4.1.738.10.5.172.0.1 - prvtLmmTxPowerThresholdCrossed
1.3.6.1.4.1.738.10.5.172.0.2