PRVT-CFM-MIB
B.A.T.M. Advance TechnologiesPrvt extension of Connectivity Fault Management module for managing IEEE 802.1ag
snmptranslate -m PRVT-CFM-MIB -Tpsnmpwalk -v2c -c <community> -m PRVT-CFM-MIB <host> 1.3.6.1.4.1.738.10.5.131Imports
| IF-MIB | InterfaceIndex |
|---|---|
| PRVT-SWITCH-MIB | switch |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TAddress, TDomain, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IprvtCfmMIB | 1.3.6.1.4.1.738.10.5.131 | |||
identity Prvt extension of Connectivity Fault Management module for managing IEEE 802.1ag | ||||
| NprvtCfmMIBNotifications | 1.3.6.1.4.1.738.10.5.131.0 | |||
| !prvtCfm1wJitterThreshold | 1.3.6.1.4.1.738.10.5.131.0.1 | |||
notification · current This trap should be sent whenever the one way jitter on a CFM test will surpass one of the 2 defined thresholds. | ||||
| !prvtCfmJitterThreshold | 1.3.6.1.4.1.738.10.5.131.0.2 | |||
notification · current This trap should be sent whenever the two way jitter on a CFM test will surpass one of the 2 defined thresholds. | ||||
| !prvtCfmFrameLossThreshold | 1.3.6.1.4.1.738.10.5.131.0.3 | |||
notification · current This trap should be sent whenever the frame loss on a CFM test will surpass one of the 2 defined thresholds. | ||||
| !prvtCfmLatencyThreshold | 1.3.6.1.4.1.738.10.5.131.0.4 | |||
notification · current This trap should be sent whenever the latency on a CFM test will surpass one of the 2 defined thresholds. | ||||
| !prvtCfmUnexpectedPriority | 1.3.6.1.4.1.738.10.5.131.0.5 | |||
notification · current References to in the [G.8021/Y.1341] : Unexpected Priority defect (dUNPr) The Unexpected Priority defect is calculated at the ETH layer. It detects the configuration of different Priorities for CCM at different MEPs belonging to the same MEG. | ||||
| !prvtCfmFaultAlarm | 1.3.6.1.4.1.738.10.5.131.0.6 | |||
notification · current A MEP has a persistent defect condition. A notification
(fault alarm) is sent to the management entity with the OID
of the MEP that has detected the fault.
Whenever a MEP has a persistent defect,
it may or may not generate a Fault Alarm to warn the system
administrator of the problem, as controlled by the MEP
Fault Notification Generator State Machine and associated
Managed Objects. Only the highest-priority defect, as shown
in Table 20-1, is reported in the Fault Alarm.
If a defect with a higher priority is raised after a Fault
Alarm has been issued, another Fault Alarm is issued.
The management entity receiving the notification can identify
the system from the network source address of the
notification, and can identify the MEP reporting the defect
by the indices in the OID of the prvtCfmMepHighestPrDefect
variable in the notification:
prvtCfmMdName - Also the index of the MEP's
Maintenance Domain table entry
(prvtCfmMdTable).
prvtCfmMaName - Also an index (with the MD table index)
of the MEP's Maintenance Association
table entry
(prvtCfmMaTable),
prvtCfmMepIdentifier - MEP Identifier and final index
into the MEP table (prvtCfmMepTable). | ||||
| !prvtCfmAisLckRecieved | 1.3.6.1.4.1.738.10.5.131.0.7 | |||
notification · current A MEP may generate a AIS/LCK notification each time its AIS/LCK condition is activated.
| ||||
| !prvtCfmAisLckCleared | 1.3.6.1.4.1.738.10.5.131.0.8 | |||
notification · current The notification is sent each time AIS/LCK condition is cleared.
| ||||
| !prvtCfmFaultAlarmCleared | 1.3.6.1.4.1.738.10.5.131.0.9 | |||
notification · current A MEP's persistent defect condition has cleared. A notification
is sent to the management entity with the OID
of the MEP that has cleared the fault.
The management entity receiving the notification can identify
the system from the network source address of the
notification, and can identify the MEP by the indices in the
OID of the prvtCfmMepIdentifier variable in the notification:
prvtCfmMdName - Also the index of the MEP's
Maintenance Domain table entry
(prvtCfmMdTable).
prvtCfmMaName - Also an index (with the MD table index)
of the MEP's Maintenance Association
table entry
(prvtCfmMaTable),
prvtCfmMepIdentifier - MEP Identifier and final index
into the MEP table (prvtCfmMepTable). | ||||
| NprvtCfmMIBObjects | 1.3.6.1.4.1.738.10.5.131.1 | |||
| SprvtCfmUpdateInterval | 1.3.6.1.4.1.738.10.5.131.1.1 | Unsigned32 (0..65535) | RW | |
scalar · Unsigned32 (0..65535) · read-write · current Time between monitoring parameters update (in seconds). A value of 0 suspends the monitoring task and a value different from 0 resumes it. Default is 20 seconds. | ||||
| SprvtCfmShutdown | 1.3.6.1.4.1.738.10.5.131.1.2 | TruthValue | RW | |
scalar · TruthValue · read-write · current Set to 'true' to disable CFM, or to 'false', to enable. | ||||
| NprvtCfmStack | 1.3.6.1.4.1.738.10.5.131.1.3 | |||
| TprvtCfmStackTable | 1.3.6.1.4.1.738.10.5.131.1.3.1 | NA | ||
table · not-accessible · current There is one CFM Stack table per bridge. It permits the retrieval of information about the Maintenance Points configured on any given interface. | ||||
| RprvtCfmStackEntry | 1.3.6.1.4.1.738.10.5.131.1.3.1.1 | NA | ||
row · not-accessible · current The Stack table entry | ||||
| CprvtCfmStackInterfaceIndex | 1.3.6.1.4.1.738.10.5.131.1.3.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current This object represents the Bridge Port or aggregated port on which MEPs or MHFs might be configured. Upon a restart of the system, the system SHALL, if necessary, change the value of this variable, and rearrange the prvtCfmStackTable, so that it indexes the entry in the interface table with the same value of ifAlias that it indexed before the system restart. If no such entry exists, then the system SHALL delete all entries in the prvtCfmStackTable with the interface index. | ||||
| CprvtCfmStackServiceIdOrNone | 1.3.6.1.4.1.738.10.5.131.1.3.1.1.2 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current VLAN ID to which the MP is attached, or 0, if none. | ||||
| CprvtCfmStackMdLevel | 1.3.6.1.4.1.738.10.5.131.1.3.1.1.3 | PrvtCfmMDLevelTC | NA | |
column · PrvtCfmMDLevelTC · not-accessible · current MD Level of the Maintenance Point. | ||||
| CprvtCfmStackDirection | 1.3.6.1.4.1.738.10.5.131.1.3.1.1.4 | PrvtCfmMpDirection | NA | |
column · PrvtCfmMpDirection · not-accessible · current Direction in which the MP faces on the Bridge Port | ||||
| CprvtCfmStackMdName | 1.3.6.1.4.1.738.10.5.131.1.3.1.1.5 | PrvtCfmMaintDomainNameOrNone | RO | |
column · PrvtCfmMaintDomainNameOrNone · read-only · current The index of the Maintenance Domain in the prvtCfmMdTable to which the MP is associated, or zero-length, if none. | ||||
| CprvtCfmStackMaName | 1.3.6.1.4.1.738.10.5.131.1.3.1.1.6 | PrvtCfmMaintAssocNameOrNone | RO | |
column · PrvtCfmMaintAssocNameOrNone · read-only · current The index of the MA in the prvtCfmMaTable to which the MP is associated, or zero-length, if none. | ||||
| CprvtCfmStackMepId | 1.3.6.1.4.1.738.10.5.131.1.3.1.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current If an MEP is configured, the MEPID, else 0 | ||||
| CprvtCfmStackMacAddress | 1.3.6.1.4.1.738.10.5.131.1.3.1.1.8 | MacAddress | RO | |
column · MacAddress · read-only · current MAC address of the MP. | ||||
| NprvtCfmMd | 1.3.6.1.4.1.738.10.5.131.1.4 | |||
| TprvtCfmMdTable | 1.3.6.1.4.1.738.10.5.131.1.4.2 | NA | ||
table · not-accessible · current The Maintenance Domain table. Each row in the table represents a different Maintenance Domain. A Maintenance Domain is described in 802.1ag (3.22) as the network or the part of the network for which faults in connectivity are to be managed. The boundary of a Maintenance Domain is defined by a set of DSAPs, each of which can become a point of connectivity to a service instance. | ||||
| RprvtCfmMdEntry | 1.3.6.1.4.1.738.10.5.131.1.4.2.1 | NA | ||
row · not-accessible · current The Maintenance Domain table entry. This entry is not lost upon reboot. It is backed up by stable storage.
| ||||
| CprvtCfmMdName | 1.3.6.1.4.1.738.10.5.131.1.4.2.1.1 | PrvtCfmMaintDomainName | NA | |
column · PrvtCfmMaintDomainName · not-accessible · current The Maintenance Domain name. Each Maintenance Domain has unique name amongst all those used or available to a service provider or operator. It facilitates easy identification of administrative responsibility for each Maintenance Domain. Clause 3.24 defines a Maintenance Domain name as the identifier, unique over the domain for which CFM is to protect against accidental concatenation of Service Instances, of a particular Maintenance Domain. | ||||
| CprvtCfmMdRowStatus | 1.3.6.1.4.1.738.10.5.131.1.4.2.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. | ||||
| CprvtCfmMdLevel | 1.3.6.1.4.1.738.10.5.131.1.4.2.1.4 | PrvtCfmMDLevelTC | RC | |
column · PrvtCfmMDLevelTC · read-create · current The Maintenance Domain Level. | ||||
| CprvtCfmMdFormat | 1.3.6.1.4.1.738.10.5.131.1.4.2.1.5 | PrvtCfmMaintDomainNameType | RC | |
column · PrvtCfmMaintDomainNameType · read-create · current The type (and thereby format) of the Maintenance Domain Name. | ||||
| CprvtCfmMdMhfCreation | 1.3.6.1.4.1.738.10.5.131.1.4.2.1.6 | PrvtCfmMhfCreationDef | RC | |
column · PrvtCfmMhfCreationDef · read-create · current Enumerated value indicating whether the management entity can create MHFs (MIP Half Function) for this Maintenance Domain. Since, in this variable, there is no encompassing Maintenance Domain, the value defMHFdefer is not allowed. | ||||
| CprvtCfmMdMhfIdPermission | 1.3.6.1.4.1.738.10.5.131.1.4.2.1.7 | PrvtCfmIdPermissionDef | RC | |
column · PrvtCfmIdPermissionDef · read-create · current Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MPs configured in this Maintenance Domain. Since, in this variable, there is no encompassing Maintenance Domain, the value sendIdDefer is not allowed. | ||||
| NprvtCfmMa | 1.3.6.1.4.1.738.10.5.131.1.5 | |||
| TprvtCfmMaTable | 1.3.6.1.4.1.738.10.5.131.1.5.1 | NA | ||
table · not-accessible · current The Maintenance Association table. Each row in the table represents an MA. An MA is a set of MEPs, each configured with a single service instance. The writable objects in this table need to be persistent upon reboot or restart of a device. Table includes extra variables needed for Y.1731 support and service awareness | ||||
| RprvtCfmMaEntry | 1.3.6.1.4.1.738.10.5.131.1.5.1.1 | NA | ||
| CprvtCfmMaName | 1.3.6.1.4.1.738.10.5.131.1.5.1.1.1 | PrvtCfmMaintAssocName | NA | |
column · PrvtCfmMaintAssocName · not-accessible · current The Short Maintenance Association name. This name must be unique within a maintenance domain. | ||||
| CprvtCfmMaRowStatus | 1.3.6.1.4.1.738.10.5.131.1.5.1.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. | ||||
| CprvtCfmMaServiceId | 1.3.6.1.4.1.738.10.5.131.1.5.1.1.4 | Unsigned32 (1..4294967294) | RC | |
column · Unsigned32 (1..4294967294) · read-create · current The primary service ID attached to this MA | ||||
| CprvtCfmMaVlanId | 1.3.6.1.4.1.738.10.5.131.1.5.1.1.5 | Integer32 (1..4094) | RC | |
column · Integer32 (1..4094) · read-create · current The primary vlan ID attached to this MA | ||||
| CprvtCfmMaMhfCreation | 1.3.6.1.4.1.738.10.5.131.1.5.1.1.6 | PrvtCfmMhfCreation | RC | |
column · PrvtCfmMhfCreation · read-create · current Indicates if the Management entity can create MHFs (MIP Half Function) for this MA. | ||||
| CprvtCfmMaPermission | 1.3.6.1.4.1.738.10.5.131.1.5.1.1.7 | PrvtCfmIdPermission | RC | |
column · PrvtCfmIdPermission · read-create · current Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MPs configured in this MA. | ||||
| CprvtCfmMaFormat | 1.3.6.1.4.1.738.10.5.131.1.5.1.1.8 | PrvtCfmMaintAssocNameType | RC | |
column · PrvtCfmMaintAssocNameType · read-create · current The type (and thereby format) of the Maintenance Association Name. | ||||
| CprvtCfmMaCcmInterval | 1.3.6.1.4.1.738.10.5.131.1.5.1.1.9 | PrvtCfmCcmInterval | RC | |
column · PrvtCfmCcmInterval · read-create · current Interval between CCM transmissions to be used by all MEPs in the MA. | ||||
| CprvtCfmMaAisLckReceive | 1.3.6.1.4.1.738.10.5.131.1.5.1.1.10 | TruthValue | RC | |
column · TruthValue · read-create · current Turn the AIS & LCK features on/off. | ||||
| CprvtCfmMaAisLckLevel | 1.3.6.1.4.1.738.10.5.131.1.5.1.1.11 | Unsigned32 (0..7) | RC | |
column · Unsigned32 (0..7) · read-create · current The MD level at which AIS & LCK frames will be sent. | ||||
| CprvtCfmMaAisLckInterval | 1.3.6.1.4.1.738.10.5.131.1.5.1.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current The time interval at which AIS and LCK frames will be sent
| ||||
| CprvtCfmMaAisLckPriority | 1.3.6.1.4.1.738.10.5.131.1.5.1.1.13 | Unsigned32 (0..7) | RC | |
column · Unsigned32 (0..7) · read-create · current COS parameter for the outgoing AIS & LCK frames. | ||||
| CprvtCfmMaClearConnectivity | 1.3.6.1.4.1.738.10.5.131.1.5.1.1.15 | Unsigned32 (0..8191) | RC | |
column · Unsigned32 (0..8191) · read-create · current The ID of the MEP to be cleared from the MEP table, or 0 for all | ||||
| NprvtCfmMep | 1.3.6.1.4.1.738.10.5.131.1.6 | |||
| TprvtCfmMepTable | 1.3.6.1.4.1.738.10.5.131.1.6.1 | NA | ||
table · not-accessible · current The Maintenance Association End Point (MEP) table. Each row in the table represents a different MEP. A MEP is an actively managed CFM entity, associated with a specific DSAP of a Service Instance, which can generate and receive CFM PDUs and track any responses. It is an end point of a single Maintenance Association, and is an endpoint of a separate Maintenance Entity for each of the other MEPs in the same Maintenance Association (802.1ag clause 3.18). This table uses three indices. The first two indices are the indices of the Maintenance Domain and MA tables, the reason being that a MEP is always related to an MA and Maintenance Domain. The MEP table also stores all the managed objects for sending LBM and LTM. *LBM Managed objects LBM Managed objects in the MEP table enables the management entity to initiate transmission of Loopback messages. It will signal the MEP that it should transmit some number of Loopback messages and detect the detection (or lack thereof) of the corresponding Loopback messages. Steps to use entries in this table: 1) Set prvtCfmMepTransmitLbmStatus to true 2) Set the target by: a) target mep - configue prvtCfmMepTransmitLbmDestIsMepId on true and then configure prvtCfmMepTransmitLbmDestMepId with the remote mep id b) target mac - configue prvtCfmMepTransmitLbmDestIsMepId on false and then configure prvtCfmMepTransmitLbmDestMacAddress with the remote device mac address 3) Setup the different data to be sent (number of messages, optional TLVs,...). 4) Record the current values of prvtCfmMepLbrIn, prvtCfmMepLbrInOutOfOrder, and prvtCfmMepLbrBadMsdu. 6) Change prvtCfmMepTransmitLbmStatus value to false to initiate transmission of Loopback messages. 7) Check the value of prvtCfmMepTransmitLbmResultOK to find out if the operation was successfully initiated or not. 8) If prvtCfmMepTransmitLbmInfinite is set to false you can monitor the value of prvtCfmMepTransmitLbmRemainingMessages. When it reaches 0, the last LBM has been transmitted and the operation is finished. Wait an additional 5 seconds to ensure that all LBRs have been returned. 9) If prvtCfmMepTransmitLbmInfinite is set to true you must stop the operation yourself by setting prvtCfmMepTransmitLbmStatus to true. 10) Compare prvtCfmMepLbrIn, prvtCfmMepLbrInOutOfOrder, and prvtCfmMepLbrBadMsdu to their old values from step 4, above, to get the results of the test. *LTM Managed objects The LTM Managed objects in the MEP table are used in a manner similar to that described for LBM transmission, above. Upon successfully initiating the transmission, the variables pvrtCfmMepTransmitLtmSeqNumber and prvtCfmMepTransmitLtmEgressIdentifier return the information required to recover the results of the LTM from the prvtCfmLtrTable. | ||||
| RprvtCfmMepEntry | 1.3.6.1.4.1.738.10.5.131.1.6.1.1 | NA | ||
row · not-accessible · current prvtCfmMepEntry | ||||
| CprvtCfmMepIdentifier | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.1 | PrvtCfmMepId | RO | |
column · PrvtCfmMepId · read-only · current Integer that is unique among all the MEPs in the same MA. Other definition is: a small integer, unique over a given Maintenance Association, identifying a specific Maintenance association End Point (3.19). MEP Identifier is also known as the MEPID. | ||||
| CprvtCfmMepRowStatus | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. | ||||
| CprvtCfmMepInterfaceIndex | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.3 | InterfaceIndex | RC | |
column · InterfaceIndex · read-create · current This object is the interface index (from ifTable) of either a bridge port, or an aggregated IEEE 802.1 link, to which the MEP is attached. | ||||
| CprvtCfmMepDirection | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.4 | PrvtCfmMpDirection | RC | |
column · PrvtCfmMpDirection · read-create · current The direction in which the MEP faces on the Bridge port. | ||||
| CprvtCfmMepShutdown | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.5 | TruthValue | RC | |
column · TruthValue · read-create · current Administrative state of the MEP The value 'true' will shutdown/disable the MEP. The value 'false' will enable the MEP. | ||||
| CprvtCfmMepFngState | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.6 | PrvtCfmFngState | RO | |
column · PrvtCfmFngState · read-only · current Current state of the MEP Fault Notification Generator State Machine. | ||||
| CprvtCfmMepCciEnabled | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.7 | TruthValue | RC | |
column · TruthValue · read-create · current If set to true, the MEP will generate CCM messages. | ||||
| CprvtCfmMepCcmLtmPriority | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.8 | Unsigned32 (0..7) | RC | |
column · Unsigned32 (0..7) · read-create · current The priority value for CCMs and LTMs transmitted by the MEP. Default Value is the highest priority value allowed to pass through the bridge port for any of this MEPs VIDs. The management entity can obtain the default value for this variable from the priority regeneration table by extracting the highest priority value in this table on this MEPs bridge port. (1 is lowest, then 2, then 0, then 3-7). | ||||
| CprvtCfmMepMacAddress | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.9 | MacAddress | RO | |
column · MacAddress · read-only · current MAC address of the MEP. | ||||
| CprvtCfmMepLowPrDef | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.10 | PrvtCfmLowestAlarmPri | RC | |
column · PrvtCfmLowestAlarmPri · read-create · current An integer value specifying the lowest priority defect that is allowed to generate fault alarm. | ||||
| CprvtCfmMepHighestPrDefect | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.11 | PrvtCfmHighestDefectPri | RO | |
column · PrvtCfmHighestDefectPri · read-only · current The highest priority defect that has been present since the MEPs Fault Notification Generator State Machine was last in the FNG_RESET state. | ||||
| CprvtCfmMepDefects | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.12 | Bits | RO | |
column · Bits · read-only · current A vector of Boolean error conditions from Table 20-1, any of which may be true.
| ||||
| CprvtCfmMepErrorCcmLastFailure | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.13 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The last-received CCM that triggered an DefErrorCCM fault. | ||||
| CprvtCfmMepXconCcmLastFailure | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.14 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The last-received CCM that triggered a DefXconCCM fault. | ||||
| CprvtCfmMepCcmSequenceErrors | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of out-of-sequence CCMs received from all remote MEPs. | ||||
| CprvtCfmMepCciSentCcms | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current Total number of Continuity Check messages transmitted. | ||||
| CprvtCfmMepNextLbmTransId | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.17 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Next sequence number/transaction identifier to be sent in a Loopback message. This sequence number can be zero because it wraps around. | ||||
| CprvtCfmMepLbrIn | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current Total number of valid, in-order Loopback Replies received. | ||||
| CprvtCfmMepLbrInOutOfOrder | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of valid, out-of-order Loopback Replies received. | ||||
| CprvtCfmMepLbrBadMsdu | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.20 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of LBRs received whose mac_service_data_unit did not match (except for the OpCode) that of the corresponding LBM (20.2.3). | ||||
| CprvtCfmMepLtmNextSeqNumber | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.21 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Next transaction identifier/sequence number to be sent in a Linktrace message. This sequence number can be zero because it wraps around. | ||||
| CprvtCfmMepUnexpLtrIn | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.22 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of unexpected LTRs received (20.39.1). | ||||
| CprvtCfmMepLbrOut | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.23 | Counter32 | RO | |
column · Counter32 · read-only · current Total number of Loopback Replies transmitted. | ||||
| CprvtCfmMepTransmitLbmStatus | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.24 | TruthValue | RC | |
column · TruthValue · read-create · current A Boolean flag set to true by the bridge port to indicate that another LBM may be transmitted. Reset to false by the MEP Loopback Initiator State Machine. | ||||
| CprvtCfmMepTransmitLbmDestMacAddress | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.25 | MacAddress | RC | |
column · MacAddress · read-create · current The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column prvtCfmMepTransmitLbmDestIsMepId is 'false'. | ||||
| CprvtCfmMepTransmitLbmDestMepId | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.26 | PrvtCfmMepIdOrZero | RC | |
column · PrvtCfmMepIdOrZero · read-create · current The Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the LBM is to be sent. This address will be used if the value of the column prvtCfmMepTransmitLbmDestIsMepId is 'true'. | ||||
| CprvtCfmMepTransmitLbmDestIsMepId | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.27 | TruthValue | RC | |
column · TruthValue · read-create · current True indicates that MEPID of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmission. | ||||
| CprvtCfmMepTransmitLbmMessages | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.28 | Integer32 (1..1024) | RC | |
column · Integer32 (1..1024) · read-create · current The number of Loopback messages to be transmitted. | ||||
| CprvtCfmMepTransmitLbmDataTlv | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.29 | OCTET STRING (SIZE (0..1462)) | RC | |
column · OCTET STRING (SIZE (0..1462)) · read-create · current An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent. | ||||
| CprvtCfmMepTransmitLbmVlanPriority | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.30 | Integer32 (0..7) | RC | |
column · Integer32 (0..7) · read-create · current Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. The default value is CCM priority. | ||||
| CprvtCfmMepTransmitLbmVlanDropEnable | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.31 | TruthValue | RC | |
column · TruthValue · read-create · current Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. For more information about VLAN Drop Enable, please check IEEE 802.1ad. | ||||
| CprvtCfmMepTransmitLbmResultOK | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.32 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates the result of the operation: - true The Loopback Message(s) will be (or has been) sent. - false The Loopback Message(s) will not be sent. | ||||
| CprvtCfmMepTransmitLbmSeqNumber | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.33 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The Loopback Transaction Identifier (prvtCfmMepNextLbmTransId) of the first LBM (to be) sent. The value returned is undefined if prvtCfmMepTransmitLbmResultOK is false. | ||||
| CprvtCfmMepTransmitLtmStatus | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.34 | TruthValue | RC | |
column · TruthValue · read-create · current A Boolean flag set to true by the bridge port to indicate that another LTM may be transmitted. In order to start linktrace following step should be executed: 1.Verify CFM connectivity 2.Set prvtCfmMepTransmitLtmTargetIsMepId to TRUE (if using target Mep) 3.Set prvtCfmMepTransmitLtmTargetMepId with the remote Mep Id 4.Set prvtCfmMepTransmitLtmTimeout (timeout for LTM packets) 5.Set prvtCfmMepTransmitLtmStatus to TRUE | ||||
| CprvtCfmMepTransmitLtmFlags | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.35 | Bits | RC | |
column · Bits · read-create · current The flags field for LTMs transmitted by the MEP.
| ||||
| CprvtCfmMepTransmitLtmTargetMacAddress | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.36 | MacAddress | RC | |
column · MacAddress · read-create · current The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column prvtCfmMepTransmitLtmTargetIsMepId is 'false'. | ||||
| CprvtCfmMepTransmitLtmTargetMepId | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.37 | PrvtCfmMepIdOrZero | RC | |
column · PrvtCfmMepIdOrZero · read-create · current An indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Association This address will be used if the value of the column prvtCfmMepTransmitLtmTargetIsMepId is 'true'. | ||||
| CprvtCfmMepTransmitLtmTargetIsMepId | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.38 | TruthValue | RC | |
column · TruthValue · read-create · current True indicates that MEPID of the target MEP is used for Linktrace transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmission. | ||||
| CprvtCfmMepTransmitLtmTtl | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.39 | Unsigned32 (0..255) | RC | |
column · Unsigned32 (0..255) · read-create · current The LTM TTL field. Default value, if not specified, is 64. The TTL field indicates the number of hops remaining to the LTM. Decremented by 1 by each Linktrace Responder that handles the LTM. The value returned in the LTR is one less than that received in the LTM. If the LTM TTL is 0 or 1, the LTM is not forwarded to the next hop, and if 0, no LTR is generated. | ||||
| CprvtCfmMepTransmitLtmResult | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.40 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates the result of the operation: - true The Linktrace Message will be (or has been) sent. - false The Linktrace Message will not be sent | ||||
| CprvtCfmMepTransmitLtmSeqNumber | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.41 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The LTM Transaction Identifier (prvtCfmMepLtmNextSeqNumber) of the LTM sent. The value returned is undefined if prvtCfmMepTransmitLtmResult is false. | ||||
| CprvtCfmMepTransmitLtmEgressIdentifier | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.42 | OCTET STRING (SIZE (8)) | RC | |
column · OCTET STRING (SIZE (8)) · read-create · current Identifies the MEP Linktrace Initiator that is originating, or the Linktrace Responder that is forwarding, this LTM. The low-order six octets contain a 48-bit IEEE MAC address unique to the system in which the MEP Linktrace Initiator or Linktrace Responder resides. The high-order two octets contain a value sufficient to uniquely identify the MEP Linktrace Initiator or Linktrace Responder within that system. For most Bridges, the address of any MAC attached to the Bridge will suffice for the low-order six octets, and 0 for the high-order octets. In some situations, e.g. if multiple virtual Bridges utilizing emulated LANs are implemented in a single physical system, the high-order two octets can be used to differentiate among the transmitting entities. The value returned is undefined if prvtCfmMepTransmitLtmResult is false. | ||||
| CprvtCfmMepAlarmSupressed | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.43 | TruthValue | RO | |
column · TruthValue · read-only · current A boolean showing if an AIS or LCK packet was received from a lower level | ||||
| CprvtCfmMepAisCondition | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.44 | TruthValue | RO | |
column · TruthValue · read-only · current AIS condition Is true by detection of signal fail condition at a Server layer or reception of AIS at a server (sub-) layer MEP [AIS condition/Rec. ITU-T Y.1731] Respectively AIS condition Exit criteria: 'During an interval equal to 3.5 times the AIS transmission period indicated in the AIS frames received earlier, the MEP does not receive AIS frames or, when ETH-CC is used, upon clearing of LOC defect at MEP' /Appendix I/Rec. ITU-T Y.1731 If prvtCfmMaAisLckLevel is configured the MEP should send AIS packets | ||||
| CprvtCfmMepLckCondition | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.45 | TruthValue | RO | |
column · TruthValue · read-only · current A boolean showing if the MEP should lock the service towards the client and send LCK packets | ||||
| CprvtCfmMepAisLifetime | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.46 | INTEGER | RO | |
column · INTEGER · read-only · current The lifetime of the last received AIS packet
| ||||
| CprvtCfmMepLckLifetime | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.47 | INTEGER | RO | |
column · INTEGER · read-only · current The lifetime of the last received LCK packet
| ||||
| CprvtCfmMepTransmitMcastLbm | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.48 | TruthValue | RC | |
column · TruthValue · read-create · current A boolean to control sending Y.1731 multicast loopback. | ||||
| CprvtCfmMepTransmitLbmInfinite | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.49 | TruthValue | RC | |
column · TruthValue · read-create · current A boolean to control sending LBMs continuously until the operation is explicitly stopped by setting this back to false | ||||
| CprvtCfmMepTransmitLbmDelay | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.50 | Unsigned32 (0..60) | RC | |
column · Unsigned32 (0..60) · read-create · current An amount of time to wait between sent LBMs (in seconds). | ||||
| CprvtCfmMepTransmitLbmTimeout | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.51 | Unsigned32 (1..60) | RC | |
column · Unsigned32 (1..60) · read-create · current An amount of time to wait after the last sent LBM if no LBR is received (in seconds). | ||||
| CprvtCfmMepTransmitLtmTimeout | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.52 | Unsigned32 (1..60) | RC | |
column · Unsigned32 (1..60) · read-create · current An amount of time to wait after the last sent LTM if no LTR is received (in seconds). | ||||
| CprvtCfmMepTransmitLbmSentPkts | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.53 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Number of successfully sent packets in the current LBM session. | ||||
| CprvtCfmMepTransmitLbmSuccessRate | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.54 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Success rate of the current LBM session (in percentage*100). | ||||
| CprvtCfmMepTransmitLbmMinTime | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.55 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Minimum LBR response time (in msec). | ||||
| CprvtCfmMepTransmitLbmAvgTime | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.56 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Average LBR response time (in msec). | ||||
| CprvtCfmMepTransmitLbmMaxTime | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.57 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Maximum LBR response time (in msec). | ||||
| CprvtCfmMepFngAlarmTime | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.58 | Unsigned32 (250..1000) | RC | |
column · Unsigned32 (250..1000) · read-create · current The time that defects must be present before a Fault Alarm is issued (fngAlarmTime. 20.33.3) (default 2.5s). | ||||
| CprvtCfmMepFngResetTime | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.59 | Unsigned32 (250..1000) | RC | |
column · Unsigned32 (250..1000) · read-create · current The time that defects must be absent before re-enabling a Fault Alarm (fngResetTime, 20.33.4) (default 10s). | ||||
| CprvtCfmMepTransmitLbmRemainingMessages | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.60 | Integer32 (0..1024) | RO | |
column · Integer32 (0..1024) · read-only · current The number of LBMs (Loopback messages) to be transmitted | ||||
| CprvtCfmMepTransmitLbmCurrentStatus | 1.3.6.1.4.1.738.10.5.131.1.6.1.1.61 | TruthValue | RO | |
column · TruthValue · read-only · current A Boolean flag set to true by the bridge port to indicate that another LBM may be transmitted. Reset to false by the MEP Loopback Initiator State Machine. | ||||
| TprvtCfmMepDbTable | 1.3.6.1.4.1.738.10.5.131.1.6.2 | NA | ||
table · not-accessible · current The MEP Database. A database, maintained by every MEP, that maintains received information about other MEPs in the Maintenance Domain. The SMI does not allow to state in a MIB that an object in a table is an array. The solution is to take the index (or indices) of the first table and add one or more indices. | ||||
| RprvtCfmMepDbEntry | 1.3.6.1.4.1.738.10.5.131.1.6.2.1 | NA | ||
row · not-accessible · current The MEP Database table entry. | ||||
| CprvtCfmMepDbRMepIdentifier | 1.3.6.1.4.1.738.10.5.131.1.6.2.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current Maintenance association End Point Identifier of a remote MEP whose information from the MEP Database is to be returned. | ||||
| CprvtCfmMepDbRMepState | 1.3.6.1.4.1.738.10.5.131.1.6.2.1.2 | PrvtCfmRemoteMepState | RO | |
column · PrvtCfmRemoteMepState · read-only · current The operational state of the remote MEP IFF State machines. | ||||
| CprvtCfmMepDbRMepFailedOkTime | 1.3.6.1.4.1.738.10.5.131.1.6.2.1.3 | TimeStamp | RO | |
column · TimeStamp · read-only · current The time (SysUpTime) at which the IFF Remote MEP state machine last entered either the RMEP_FAILED or RMEP_OK state. | ||||
| CprvtCfmMepDbMacAddress | 1.3.6.1.4.1.738.10.5.131.1.6.2.1.4 | MacAddress | RO | |
column · MacAddress · read-only · current The MAC address of the remote MEP. | ||||
| CprvtCfmMepDbRdi | 1.3.6.1.4.1.738.10.5.131.1.6.2.1.5 | TruthValue | RO | |
column · TruthValue · read-only · current State of the RDI bit in the last received CCM (true for RDI=1), or false if none has been received. | ||||
| CprvtCfmMepDbPortStatusTlv | 1.3.6.1.4.1.738.10.5.131.1.6.2.1.6 | PrvtCfmPortStatus | RO | |
column · PrvtCfmPortStatus · read-only · current An enumerated value of the Port status TLV received in the last CCM from the remote MEP or the default value psNoPortStateTLV indicating either no CCM has been received, or that nor port status TLV was received in the last CCM. | ||||
| CprvtCfmMepDbInterfaceStatusTlv | 1.3.6.1.4.1.738.10.5.131.1.6.2.1.7 | PrvtCfmInterfaceStatus | RO | |
column · PrvtCfmInterfaceStatus · read-only · current An enumerated value of the Interface status TLV received in the last CCM from the remote MEP or the default value isNoInterfaceStatus TLV indicating either no CCM has been received, or that no interface status TLV was received in the last CCM. | ||||
| CprvtCfmMepDbChassisIdSubtype | 1.3.6.1.4.1.738.10.5.131.1.6.2.1.8 | LldpChassisIdSubtype | RO | |
column · LldpChassisIdSubtype · read-only · current This object specifies the format of the Chassis ID received in the last CCM. | ||||
| CprvtCfmMepDbChassisId | 1.3.6.1.4.1.738.10.5.131.1.6.2.1.9 | LldpChassisId | RO | |
column · LldpChassisId · read-only · current The Chassis ID. The format of this object is determined by the value of the prvtCfmLtrChassisIdSubtype object. | ||||
| CprvtCfmMepDbManAddressDomain | 1.3.6.1.4.1.738.10.5.131.1.6.2.1.10 | TDomain | RO | |
column · TDomain · read-only · current The TDomain that identifies the type and format of the related prvtCfmMepDbManAddress object, used to access the SNMP agent of the system transmitting the CCM. Received in the CCM Sender ID TLV from that system. Typical values will be one of (not all inclusive) list: snmpUDPDomain (from SNMPv2-TM, RFC3417) snmpIeee802Domain (from SNMP-IEEE802-TM-MIB, RFC4789) The value 'zeroDotZero' (from RFC2578) indicates 'no LTR Sender ID TLV received', in which case the related object prvtCfmMepDbManAddress must have a zero-length OCTET STRING as a value. | ||||
| CprvtCfmMepDbManAddress | 1.3.6.1.4.1.738.10.5.131.1.6.2.1.11 | TAddress | RO | |
column · TAddress · read-only · current The TAddress that can be used to access the SNMP agent of the system transmitting the CCM, received in the CCM Sender ID TLV from that system. If the related object prvtCfmMepDbManAddressDomain contains the value 'zeroDotZero', this object prvtCfmMepDbManAddress must have a zero-length OCTET STRING as a value. | ||||
| TprvtCfmLtrTable | 1.3.6.1.4.1.738.10.5.131.1.6.3 | NA | ||
table · not-accessible · current This table extends the MEP table and contains a list of Linktrace replies received by a specific MEP in response to a linktrace message. SNMP SMI does not allow to state in a MIB that an object in a table is an array. The solution is to take the index (or indices) of the first table and add one or more indices. | ||||
| RprvtCfmLtrEntry | 1.3.6.1.4.1.738.10.5.131.1.6.3.1 | NA | ||
row · not-accessible · current The Linktrace Reply table entry. | ||||
| CprvtCfmLtrSeqNumber | 1.3.6.1.4.1.738.10.5.131.1.6.3.1.1 | Unsigned32 (0..4294967295) | NA | |
column · Unsigned32 (0..4294967295) · not-accessible · current Transaction identifier/Sequence number returned by a previous transmit linktrace message command, indicating which LTM's response is going to be returned. | ||||
| CprvtCfmLtrReceiveOrder | 1.3.6.1.4.1.738.10.5.131.1.6.3.1.2 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. prvtCfmLtrReceiveOrder are assigned sequentially from 1, in the order that the Linktrace Initiator received the LTRs. | ||||
| CprvtCfmLtrTtl | 1.3.6.1.4.1.738.10.5.131.1.6.3.1.3 | Unsigned32 (0..255) | RO | |
column · Unsigned32 (0..255) · read-only · current TTL field value for a returned LTR. | ||||
| CprvtCfmLtrForwarded | 1.3.6.1.4.1.738.10.5.131.1.6.3.1.4 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates if a LTM was forwarded by the responding MP, as returned in the 'FwdYes' flag of the flags field. | ||||
| CprvtCfmLtrTerminalMep | 1.3.6.1.4.1.738.10.5.131.1.6.3.1.5 | TruthValue | RO | |
column · TruthValue · read-only · current A boolean value stating whether the forwarded LTM reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field. | ||||
| CprvtCfmLtrLastEgressIdentifier | 1.3.6.1.4.1.738.10.5.131.1.6.3.1.6 | OCTET STRING (SIZE (8)) | RO | |
column · OCTET STRING (SIZE (8)) · read-only · current An octet field holding the Last Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Last Egress Identifier identifies the MEP Linktrace Initiator that originated, or the Linktrace Responder that forwarded, the LTM to which this LTR is the response. This is the same value as the Egress Identifier TLV of that LTM. | ||||
| CprvtCfmLtrNextEgressIdentifier | 1.3.6.1.4.1.738.10.5.131.1.6.3.1.7 | OCTET STRING (SIZE (8)) | RO | |
column · OCTET STRING (SIZE (8)) · read-only · current An octet field holding the Next Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Next Egress Identifier Identifies the Linktrace Responder that transmitted this LTR, and can forward the LTM to the next hop. This is the same value as the Egress Identifier TLV of the forwarded LTM, if any. If the FwdYes bit of the Flags field is false, the contents of this field are undefined, i.e. any value can be transmitted, and the field is ignored by the receiver. | ||||
| CprvtCfmLtrRelay | 1.3.6.1.4.1.738.10.5.131.1.6.3.1.8 | PrvtCfmRelayActionFieldValue | RO | |
column · PrvtCfmRelayActionFieldValue · read-only · current Value returned in the Relay Action field. | ||||
| CprvtCfmLtrChassisIdSubtype | 1.3.6.1.4.1.738.10.5.131.1.6.3.1.9 | LldpChassisIdSubtype | RO | |
column · LldpChassisIdSubtype · read-only · current This object specifies the format of the Chassis ID returned in the Sender ID TLV of the LTR, if any. This value is meaningless if the prvtCfmLtrChassisId has a length of 0. | ||||
| CprvtCfmLtrChassisId | 1.3.6.1.4.1.738.10.5.131.1.6.3.1.10 | LldpChassisId | RO | |
column · LldpChassisId · read-only · current The Chassis ID returned in the Sender ID TLV of the LTR, if any. The format of this object is determined by the value of the prvtCfmLtrChassisIdSubtype object. | ||||
| CprvtCfmLtrManAddressDomain | 1.3.6.1.4.1.738.10.5.131.1.6.3.1.11 | TDomain | RO | |
column · TDomain · read-only · current The TDomain that identifies the type and format of the related prvtCfmLtrManAddress object, used to access the SNMP agent of the system transmitting the LTR. Received in the LTR Sender ID TLV from that system. Typical values will be one of (not all inclusive) list: snmpUDPDomain (from SNMPv2-TM, RFC3417) snmpIeee802Domain (from SNMP-IEEE802-TM-MIB, RFC4789) The value 'zeroDotZero' (from RFC2578) indicates 'no LTR Sender ID TLV received', in which case the related object prvtCfmLtrManAddress must have a zero-length OCTET STRING as a value. | ||||
| CprvtCfmLtrManAddress | 1.3.6.1.4.1.738.10.5.131.1.6.3.1.12 | TAddress | RO | |
column · TAddress · read-only · current The TAddress that can be used to access the SNMP agent of the system transmitting the CCM, received in the CCM Sender ID TLV from that system. If the related object prvtCfmLtrManAddressDomain contains the value 'zeroDotZero', this object prvtCfmLtrManAddress must have a zero-length OCTET STRING as a value. | ||||
| CprvtCfmLtrIngress | 1.3.6.1.4.1.738.10.5.131.1.6.3.1.13 | PrvtCfmIngressActionFieldValue | RO | |
column · PrvtCfmIngressActionFieldValue · read-only · current The value returned in the Ingress Action Field of the LTM. | ||||
| CprvtCfmLtrIngressMac | 1.3.6.1.4.1.738.10.5.131.1.6.3.1.14 | MacAddress | RO | |
column · MacAddress · read-only · current MAC address returned in the ingress MAC address field. | ||||
| CprvtCfmLtrIngressPortIdSubtype | 1.3.6.1.4.1.738.10.5.131.1.6.3.1.15 | LldpPortIdSubtype | RO | |
column · LldpPortIdSubtype · read-only · current Format of the Ingress Port ID. | ||||
| CprvtCfmLtrIngressPortId | 1.3.6.1.4.1.738.10.5.131.1.6.3.1.16 | LldpPortId | RO | |
column · LldpPortId · read-only · current Ingress Port ID. The format of this object is determined by the value of the prvtCfmLtrIngressPortIdSubtype object. | ||||
| CprvtCfmLtrEgress | 1.3.6.1.4.1.738.10.5.131.1.6.3.1.17 | PrvtCfmEgressActionFieldValue | RO | |
column · PrvtCfmEgressActionFieldValue · read-only · current The value returned in the Egress Action Field of the LTM. | ||||
| CprvtCfmLtrEgressMac | 1.3.6.1.4.1.738.10.5.131.1.6.3.1.18 | MacAddress | RO | |
column · MacAddress · read-only · current MAC address returned in the egress MAC address field. | ||||
| CprvtCfmLtrEgressPortIdSubtype | 1.3.6.1.4.1.738.10.5.131.1.6.3.1.19 | LldpPortIdSubtype | RO | |
column · LldpPortIdSubtype · read-only · current Format of the egress Port ID. | ||||
| CprvtCfmLtrEgressPortId | 1.3.6.1.4.1.738.10.5.131.1.6.3.1.20 | LldpPortId | RO | |
column · LldpPortId · read-only · current Egress Port ID. The format of this object is determined by the value of the prvtCfmLtrEgressPortIdSubtype object. | ||||
| CprvtCfmLtrOrganizationSpecificTlv | 1.3.6.1.4.1.738.10.5.131.1.6.3.1.21 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current All Organization specific TLVs returned in the LTR, if any. Includes all octets including and following the TLV Length field of each TLV, concatenated together. | ||||
| CprvtCfmLtrTime | 1.3.6.1.4.1.738.10.5.131.1.6.3.1.22 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Remote MPs response time in milliseconds. | ||||
| CprvtCfmLtrSourceMac | 1.3.6.1.4.1.738.10.5.131.1.6.3.1.23 | MacAddress | RO | |
column · MacAddress · read-only · current MAC address that originated the LTR. | ||||
| TprvtCfmLbrTable | 1.3.6.1.4.1.738.10.5.131.1.6.4 | NA | ||
table · not-accessible · current Table contains loopback results following the last loopback operation. | ||||
| RprvtCfmLbrEntry | 1.3.6.1.4.1.738.10.5.131.1.6.4.1 | NA | ||
row · not-accessible · current prvtCfmLbrEntry | ||||
| CprvtCfmLbrSeqNumber | 1.3.6.1.4.1.738.10.5.131.1.6.4.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current Transaction identifier/Sequence number of the received LBR. | ||||
| CprvtCfmLbrReceiveOrder | 1.3.6.1.4.1.738.10.5.131.1.6.4.1.2 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current An index to distinguish among multiple LBRs with the same LBR Transaction Identifier field value. This situation can appear in the case of multicast loopback. | ||||
| CprvtCfmLbrTime | 1.3.6.1.4.1.738.10.5.131.1.6.4.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Remote MEPs response time in milliseconds. | ||||
| CprvtCfmLbrMacAddress | 1.3.6.1.4.1.738.10.5.131.1.6.4.1.4 | MacAddress | RO | |
column · MacAddress · read-only · current Remote MEPs mac address. For unicast loopback this is the same as prvtCfmMepTransmitLbmDestMacAddress, but for multicast loopback there will be different entries. | ||||
| CprvtCfmLbrBadMsdu | 1.3.6.1.4.1.738.10.5.131.1.6.4.1.5 | TruthValue | RO | |
column · TruthValue · read-only · current Result of the Data TLV verification. | ||||
| NprvtCfmProfile | 1.3.6.1.4.1.738.10.5.131.1.7 | |||
| SprvtCfmProfileTableNextIndex | 1.3.6.1.4.1.738.10.5.131.1.7.1 | PrvtCfmIndexIntegerNextFree | RO | |
scalar · PrvtCfmIndexIntegerNextFree · read-only · current This object contains an unused value for prvtCfmProfileIndex in the prvtCfmProfileTable or a zero to indicate that none exist. | ||||
| TprvtCfmProfileTable | 1.3.6.1.4.1.738.10.5.131.1.7.2 | NA | ||
table · not-accessible · current Table contains loopback results from all remote MEPs in the MA. | ||||
| RprvtCfmProfileEntry | 1.3.6.1.4.1.738.10.5.131.1.7.2.1 | NA | ||
| CprvtCfmProfileIndex | 1.3.6.1.4.1.738.10.5.131.1.7.2.1.1 | Unsigned32 (1..96) | NA | |
column · Unsigned32 (1..96) · not-accessible · current Table index. | ||||
| CprvtCfmProfileRowStatus | 1.3.6.1.4.1.738.10.5.131.1.7.2.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. | ||||
| CprvtCfmProfileDescr | 1.3.6.1.4.1.738.10.5.131.1.7.2.1.3 | OCTET STRING (SIZE (0..255)) | RC | |
column · OCTET STRING (SIZE (0..255)) · read-create · current A description for this profile. This field must be unique among all profiles. | ||||
| CprvtCfmProfilePriority | 1.3.6.1.4.1.738.10.5.131.1.7.2.1.4 | Unsigned32 (0..7) | RC | |
column · Unsigned32 (0..7) · read-create · current 802.1p class-of-service setting. | ||||
| CprvtCfmProfileRate | 1.3.6.1.4.1.738.10.5.131.1.7.2.1.5 | Unsigned32 (1..3) | RC | |
column · Unsigned32 (1..3) · read-create · current Number of Request packets to send each time. | ||||
| CprvtCfmProfileSize | 1.3.6.1.4.1.738.10.5.131.1.7.2.1.6 | Unsigned32 (0..1462) | RC | |
column · Unsigned32 (0..1462) · read-create · current Size of data TLV included in probe packets (in octets). | ||||
| CprvtCfmProfileBucketSize | 1.3.6.1.4.1.738.10.5.131.1.7.2.1.7 | Unsigned32 (2..255) | RC | |
column · Unsigned32 (2..255) · read-create · current Number of the results to save for results calculation. | ||||
| CprvtCfmProfile1wJitterError | 1.3.6.1.4.1.738.10.5.131.1.7.2.1.8 | Unsigned32 (1..10000) | RC | |
column · Unsigned32 (1..10000) · read-create · current Specifies one-way jitter error values to monitor in milliseconds. | ||||
| CprvtCfmProfile1wJitterWarning | 1.3.6.1.4.1.738.10.5.131.1.7.2.1.9 | Unsigned32 (1..10000) | RC | |
column · Unsigned32 (1..10000) · read-create · current Specifies one-way jitter warning values to monitor in milliseconds. | ||||
| CprvtCfmProfileJitterError | 1.3.6.1.4.1.738.10.5.131.1.7.2.1.10 | Unsigned32 (1..10000) | RC | |
column · Unsigned32 (1..10000) · read-create · current Specifies round-trip jitter error values to monitor in milliseconds. | ||||
| CprvtCfmProfileJitterErrorPeriod | 1.3.6.1.4.1.738.10.5.131.1.7.2.1.11 | Unsigned32 (1..3600) | RC | |
column · Unsigned32 (1..3600) · read-create · current Specifies the duration jitter occurs in seconds. | ||||
| CprvtCfmProfileJitterWarning | 1.3.6.1.4.1.738.10.5.131.1.7.2.1.12 | Unsigned32 (1..10000) | RC | |
column · Unsigned32 (1..10000) · read-create · current Specifies round-trip jitter warning values to monitor in milliseconds. If set value is greater than the jitter-error it means that the warning is disabled. | ||||
| CprvtCfmProfileJitterWarningPeriod | 1.3.6.1.4.1.738.10.5.131.1.7.2.1.13 | Unsigned32 (1..3600) | RC | |
column · Unsigned32 (1..3600) · read-create · current Specifies the duration jitter occurs in seconds. | ||||
| CprvtCfmProfileFrameLossError | 1.3.6.1.4.1.738.10.5.131.1.7.2.1.14 | Unsigned32 (0..99) | RC | |
column · Unsigned32 (0..99) · read-create · current Specifies round-trip frame-loss error values to monitor. The default is frame-loss of 10% is reported. | ||||
| CprvtCfmProfileFrameLossWarning | 1.3.6.1.4.1.738.10.5.131.1.7.2.1.15 | Unsigned32 (0..99) | RC | |
column · Unsigned32 (0..99) · read-create · current Specifies round-trip frame-loss warning values to monitor. The default is frame-loss of 8% is reported. If set value is greater than the frame-loss-error it means that the warning is disable. | ||||
| CprvtCfmProfileLatencyError | 1.3.6.1.4.1.738.10.5.131.1.7.2.1.16 | Unsigned32 (1..10000) | RC | |
column · Unsigned32 (1..10000) · read-create · current Specifies round-trip latency error values to monitor in milliseconds. | ||||
| CprvtCfmProfileLatencyErrorPeriod | 1.3.6.1.4.1.738.10.5.131.1.7.2.1.17 | Unsigned32 (1..3600) | RC | |
column · Unsigned32 (1..3600) · read-create · current Specifies the duration latency increase occurs in seconds. | ||||
| CprvtCfmProfileLatencyWarning | 1.3.6.1.4.1.738.10.5.131.1.7.2.1.18 | Unsigned32 (1..10000) | RC | |
column · Unsigned32 (1..10000) · read-create · current Specifies round-trip latency error values to monitor in milliseconds. If set value is greater than the latency-error it means that the warning is disabled. | ||||
| CprvtCfmProfileLatencyWarningPeriod | 1.3.6.1.4.1.738.10.5.131.1.7.2.1.19 | Unsigned32 (1..3600) | RC | |
column · Unsigned32 (1..3600) · read-create · current Specifies the duration latency increase occurs. | ||||
| CprvtCfmProfileOneWayJitterEnabled | 1.3.6.1.4.1.738.10.5.131.1.7.2.1.20 | TruthValue | RC | |
column · TruthValue · read-create · current Specify if one-way jitter is monitored. | ||||
| CprvtCfmProfileTwoWayJitterEnabled | 1.3.6.1.4.1.738.10.5.131.1.7.2.1.21 | TruthValue | RC | |
column · TruthValue · read-create · current Specify if two-way jitter is monitored. | ||||
| CprvtCfmProfileFramelossEnabled | 1.3.6.1.4.1.738.10.5.131.1.7.2.1.22 | TruthValue | RC | |
column · TruthValue · read-create · current Specify if frame-loss is monitored. | ||||
| CprvtCfmProfileLatencyEnabled | 1.3.6.1.4.1.738.10.5.131.1.7.2.1.23 | TruthValue | RC | |
column · TruthValue · read-create · current Specify if two-way latency is monitored. | ||||
| NprvtCfmProcess | 1.3.6.1.4.1.738.10.5.131.1.8 | |||
| TprvtCfmProcessTable | 1.3.6.1.4.1.738.10.5.131.1.8.1 | NA | ||
table · not-accessible · current Private extension of prvtCfmMaTable. Controls the two-way monitoring process for MEP's in the MA. | ||||
| RprvtCfmProcessEntry | 1.3.6.1.4.1.738.10.5.131.1.8.1.1 | NA | ||
row · not-accessible · current prvtCfmProcessEntry | ||||
| CprvtCfmProcessIndex | 1.3.6.1.4.1.738.10.5.131.1.8.1.1.1 | Unsigned32 (1..256) | NA | |
column · Unsigned32 (1..256) · not-accessible · current Table index. | ||||
| CprvtCfmProcessRowStatus | 1.3.6.1.4.1.738.10.5.131.1.8.1.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. | ||||
| CprvtCfmProcessProfileIndex | 1.3.6.1.4.1.738.10.5.131.1.8.1.1.3 | Unsigned32 (1..64) | RC | |
column · Unsigned32 (1..64) · read-create · current Index of the monitoring profile to be used. | ||||
| CprvtCfmProcessName | 1.3.6.1.4.1.738.10.5.131.1.8.1.1.4 | OCTET STRING (SIZE (0..20)) | RO | |
column · OCTET STRING (SIZE (0..20)) · read-only · current The name of the process. Should be unique per domain/MA | ||||
| CprvtCfmProcessShutdown | 1.3.6.1.4.1.738.10.5.131.1.8.1.1.5 | TruthValue | RC | |
column · TruthValue · read-create · current The value 'true' will disable two-way monitoring process for MEP's in the MA. | ||||
| CprvtCfmProcessRepeatInterval | 1.3.6.1.4.1.738.10.5.131.1.8.1.1.6 | Unsigned32 (1..420) | RC | |
column · Unsigned32 (1..420) · read-create · current Repeating frequency of the monitoring process. | ||||
| CprvtCfmProcessPacketType | 1.3.6.1.4.1.738.10.5.131.1.8.1.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current Use CFM Loopback or Y.1731 LMMs and DMMs packets.
| ||||
| CprvtCfmProcessUnreturnedPkts | 1.3.6.1.4.1.738.10.5.131.1.8.1.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Number of requests for which a reply hasn't been received. These packets will be counted as lost when they enter timeout. | ||||
| TprvtCfmProcessResultTable | 1.3.6.1.4.1.738.10.5.131.1.8.2 | NA | ||
table · not-accessible · current Table contains process results. | ||||
| RprvtCfmProcessResultEntry | 1.3.6.1.4.1.738.10.5.131.1.8.2.1 | NA | ||
row · not-accessible · current prvtCfmProcessResultEntry | ||||
| CprvtCfmProcessResultOneWayJitter | 1.3.6.1.4.1.738.10.5.131.1.8.2.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current One way jitter calculated for a specific remote MEP in milliseconds | ||||
| CprvtCfmProcessResultTwoWayJitter | 1.3.6.1.4.1.738.10.5.131.1.8.2.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Two way jitter calculated for a specific remote MEP in milliseconds | ||||
| CprvtCfmProcessResultLatency | 1.3.6.1.4.1.738.10.5.131.1.8.2.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Two way latency calculated for a specific remote MEP in milliseconds | ||||
| CprvtCfmProcessResultFrameloss | 1.3.6.1.4.1.738.10.5.131.1.8.2.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Two way frameloss calculated for a specific remote MEP in units of hundredths of percent. Note: When prvtCfmProcessResultFrameloss has value of 10000, all the values of prvtCfmProcessResultOneWayJitter, prvtCfmProcessResultTwoWayJitter and prvtCfmProcessResultLatency are irrelevant. | ||||
| NprvtCfmMaAisLckVlan | 1.3.6.1.4.1.738.10.5.131.1.9 | |||
| TprvtCfmMaAisLckVlanTable | 1.3.6.1.4.1.738.10.5.131.1.9.1 | NA | ||
table · not-accessible · current Table includes extra variables needed for AIS/LCK configurable vlans | ||||
| RprvtCfmMaAisLckVlanEntry | 1.3.6.1.4.1.738.10.5.131.1.9.1.1 | NA | ||
row · not-accessible · current Table includes extra variables needed for AIS/LCK configurable vlans | ||||
| CprvtCfmMaAisLckVlanId | 1.3.6.1.4.1.738.10.5.131.1.9.1.1.1 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current Vlan ID (towards customer level) that the generated AIS/LCK packets should use. | ||||
| CprvtCfmMaAisLckVlanRowStatus | 1.3.6.1.4.1.738.10.5.131.1.9.1.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The status of the row. | ||||
Textual conventions
LldpChassisIdOCTET STRINGDisplay hint:
250aThis TC describes the format of a chassis identifier string. Objects of this type are always used with an associated LldpChassisIdSubtype object, which identifies the format of the particular LldpChassisId object instance. If the associated LldpChassisIdSubtype object has a value of 'chassisComponent(1)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a chassis component (i.e., an entPhysicalClass value of 'chassis(3)'). If the associated LldpChassisIdSubtype object has a value of 'interfaceAlias(2)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863) for an interface on the containing chassis. If the particular ifAlias object does not contain any values, another chassis identifier type should be used. If the associated LldpChassisIdSubtype object has a value of 'portComponent(3)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component within the containing chassis. If the associated LldpChassisIdSubtype object has a value of 'macAddress(4)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order), of a port on the containing chassis as defined in IEEE Std 802-2001. If the associated LldpChassisIdSubtype object has a value of 'networkAddress(5)', then this string identifies a particular network address, encoded in network byte order, associated with one or more ports on the containing chassis. The first octet contains the IANA Address Family Numbers enumeration value for the specific address type, and octets 2 through N contain the network address value in network byte order. If the associated LldpChassisIdSubtype object has a value of 'interfaceName(6)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863) for an interface on the containing chassis. If the particular ifName object does not contain any values, another chassis identifier type should be used. If the associated LldpChassisIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned Chassis ID.
LldpChassisIdSubtypeINTEGERchassisComponent(1)interfaceAlias(2)interfaceName(6)local(7)macAddress(4)networkAddress(5)notSet(0)portComponent(3)This TC describes the source of a chassis identifier. The enumeration 'chassisComponent(1)' represents a chassis identifier based on the value of entPhysicalAlias object (defined in IETF RFC 2737) for a chassis component (i.e., an entPhysicalClass value of 'chassis(3)'). The enumeration 'interfaceAlias(2)' represents a chassis identifier based on the value of ifAlias object (defined in IETF RFC 2863) for an interface on the containing chassis. The enumeration 'portComponent(3)' represents a chassis identifier based on the value of entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component (i.e., entPhysicalClass value of 'port(10)' or 'backplane(4)'), within the containing chassis. The enumeration 'macAddress(4)' represents a chassis identifier based on the value of a unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order), of a port on the containing chassis as defined in IEEE Std 802-2001. The enumeration 'networkAddress(5)' represents a chassis identifier based on a network address, associated with a particular chassis. The encoded address is actually composed of two fields. The first field is a single octet, representing the IANA AddressFamilyNumbers value for the specific address type, and the second field is the network address value. The enumeration 'interfaceName(6)' represents a chassis identifier based on the value of ifName object (defined in IETF RFC 2863) for an interface on the containing chassis. The enumeration 'local(7)' represents a chassis identifier based on a locally defined value.
LldpPortIdOCTET STRINGDisplay hint:
250aThis TC describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. If the associated LldpPortIdSubtype object has a value of 'interfaceAlias(1)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863). If the particular ifAlias object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'portComponent(2)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component. If the associated LldpPortIdSubtype object has a value of 'macAddress(3)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order) associated with the port (IEEE Std 802-2001). If the associated LldpPortIdSubtype object has a value of 'networkAddress(4)', then this string identifies a network address associated with the port. The first octet contains the IANA AddressFamilyNumbers enumeration value for the specific address type, and octets 2 through N contain the networkAddress address value in network byte order. If the associated LldpPortIdSubtype object has a value of 'interfaceName(5)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863). If the particular ifName object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'agentCircuitId(6)', then this string identifies a agent-local identifier of the circuit (defined in RFC 3046). If the associated LldpPortIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned port ID.
LldpPortIdSubtypeINTEGERagentCircuitId(6)interfaceAlias(1)interfaceName(5)local(7)macAddress(3)networkAddress(4)notSet(0)portComponent(2)This TC describes the source of a particular type of port identifier used in the LLDP MIB. The enumeration 'interfaceAlias(1)' represents a port identifier based on the ifAlias MIB object, defined in IETF RFC 2863. The enumeration 'portComponent(2)' represents a port identifier based on the value of entPhysicalAlias (defined in IETF RFC 2737) for a port component (i.e., entPhysicalClass value of 'port(10)'), within the containing chassis. The enumeration 'macAddress(3)' represents a port identifier based on a unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order), which has been detected by the agent and associated with a particular port (IEEE Std 802-2001). The enumeration 'networkAddress(4)' represents a port identifier based on a network address, detected by the agent and associated with a particular port. The enumeration 'interfaceName(5)' represents a port identifier based on the ifName MIB object, defined in IETF RFC 2863. The enumeration 'agentCircuitId(6)' represents a port identifier based on the agent-local identifier of the circuit (defined in RFC 3046), detected by the agent and associated with a particular port. The enumeration 'local(7)' represents a port identifier based on a value locally assigned.
PrvtCfmCcmIntervalINTEGERinterval100ms(3)interval10min(7)interval10ms(2)interval10s(5)interval1min(6)interval1s(4)interval300Hz(1)Indicates the interval at which CCMs are sent by a MEP. The possible values are: -- intervalInvalid(0) No CCMs are sent (disabled). interval300Hz(1) CCMs are sent every 3 1/3 milliseconds (300Hz). interval10ms(2) CCMs are sent every 10 milliseconds. interval100ms(3) CCMs are sent every 100 milliseconds. interval1s(4) CCMs are sent every 1 second. interval10s(5) CCMs are sent every 10 seconds. interval1min(6) CCMs are sent every minute. interval10min(7) CCMs are sent every 10 minutes. Note: enumerations start at zero to match the 'CCM Interval field' protocol field.
PrvtCfmEgressActionFieldValueINTEGERegrBlocked(3)egrDown(2)egrOK(1)egrVid(4)notSet(0)Possible values returned in the egress action field
PrvtCfmFngStateINTEGERfngDefect(2)fngDefectClearing(5)fngDefectReported(4)fngReportDefect(3)fngReset(1)Indicates the diferent states of the MEP Fault Notification Generator State Machine. fngReset(1) No defect has been present since the prvtCfmMepFngResetTime timer expired, or since the state machine was last reset. fngDefect(2) A defect is present, but not for a long enough time to be reported (prvtCfmMepFngAlarmTime). fngReportDefect(3) A momentary state during which the defect is reported by sending a prvtCfmFaultAlarm notification, if that action is enabled. fngDefectReported(4) A defect is present, and some defect has been reported. fngDefectClearing(5) No defect is present, but the prvtCfmMepFngResetTime timer has not yet expired.
PrvtCfmHighestDefectPriINTEGERdefErrorCCM(4)defMACstatus(2)defRDICCM(1)defRemoteCCM(3)defXconCCM(5)none(0)An enumerated value, equal to the contents of the variable highestDefect (20.33.9 and Table 20-1), indicating the highest-priority defect that has been present since the MEP Fault Notification Generator State Machine was last in the FNG_RESET state, either: none(0) no defects since FNG_RESET defRDICCM(1) DefRDICCM defMACstatus(2) DefMACstatus defRemoteCCM(3) DefRemoteCCM defErrorCCM(4) DefErrorCCM defXconCCM(5) DefXconCCM The value 0 is used for no defects so that additional higher priority values can be added, if needed, at a later time, and so that these values correspond with those in PrvtCfmLowestAlarmPri.
PrvtCfmIdPermissionINTEGERsendIdChassis(2)sendIdChassisManage(4)sendIdDefer(5)sendIdManage(3)sendIdNone(1)Indicates what, if anything, is to be included in the Sender ID TLV transmitted in CCMs, LBMs, LTMs, and LTRs. The valid values are: sendIdNone(1) The Sender ID TLV is not to be sent. sendIdChassis(2) The Chassis ID Length, Chassis ID Subtype, and Chassis ID fields of the Sender ID TLV are to be sent. sendIdManage(3) The Management Address Length and Management Address of the Sender ID TLV are to be sent. sendIdChassisManage(4) The Chassis ID Length, Chassis ID Subtype, Chassis ID, Management Address Length and Management Address fields are all to be sent. sendIdDefer(5) The contents of the Sender ID TLV are determined by the corresponding Maintenance Domain variable (prvtCfmMaIdPermission).
PrvtCfmIdPermissionDefINTEGERsendIdChassis(2)sendIdChassisManage(4)sendIdManage(3)sendIdNone(1)Indicates what, if anything, is to be included in the Sender ID TLV transmitted in CCMs, LBMs, LTMs, and LTRs. The valid values are: sendIdNone(1) The Sender ID TLV is not to be sent. sendIdChassis(2) The Chassis ID Length, Chassis ID Subtype, and Chassis ID fields of the Sender ID TLV are to be sent. sendIdManage(3) The Management Address Length and Management Address of the Sender ID TLV are to be sent. sendIdChassisManage(4) The Chassis ID Length, Chassis ID Subtype, Chassis ID, Management Address Length and Management Address fields are all to be sent. sendIdDefer(5) The contents of the Sender ID TLV are determined by the corresponding Maintenance Domain variable (prvtCfmMaIdPermission).
PrvtCfmIndexIntegerNextFreeUnsigned32Display hint:
dAn integer which may be used as a new Index in a table. The special value of 0 indicates that no more new entries can be created in the relevant table. When a MIB is used for configuration, an object with this SYNTAX always contains a legal value (if non-zero) for an index that is not currently used in the relevant table. The Command Generator (Network Management Application) reads this variable and uses the (non-zero) value read when creating a new row with an SNMP SET. When the SET is performed, the Command Responder (agent) must determine whether the value is indeed still unused; Two Network Management Applications may attempt to create a row (configuration entry) simultaneously and use the same value. If it is currently unused, the SET succeeds and the Command Responder (agent) changes the value of this object, according to an implementation-specific algorithm. If the value is in use, however, the SET fails. The Network Management Application must then re-read this variable to obtain a new usable value. An OBJECT-TYPE definition using this SYNTAX MUST specify the relevant table for which the object is providing this functionality.
PrvtCfmIngressActionFieldValueINTEGERingBlocked(3)ingDown(2)ingOk(1)ingVid(4)Possible values returned in the ingress action field.
PrvtCfmInterfaceStatusINTEGERisDormant(5)isDown(2)isLowerLayerDown(7)isNoInterfaceStatusTLV(0)isNotPresent(6)isTesting(3)isUnknown(4)isUp(1)An enumerated value from the Interface Status TLV from the last CCM received from the last MEP. It indicates the status of the Interface within which the MEP transmitting the CCM is configured, or the next lower Interface in the Interface Stack, if the MEP is not configured within an Interface. isNoInterfaceStatusTLV(0) Indicates either that no CCM has been received or that no interface status TLV was present in the last CCM received. isUp(1) The interface is ready to pass packets. isDown(2) The interface cannot pass packets isTesting(3) The interface is in some test mode. isUnknown(4) The interface status cannot be determined for some reason. isDormant(5) The interface is not in a state to pass packets but is in a pending state, waiting for some external event. isNotPresent(6) Some component of the interface is missing isLowerLayerDown(7) The interface is down due to state of the lower layer interfaces NOTE: A 0 value is used for isNoInterfaceStatusTLV, so that these code points can be kept consistent with new code points added to ifOperStatus in the IF-MIB.
PrvtCfmLowestAlarmPriINTEGERallDef(1)errXcon(4)macRemErrXcon(2)noXcon(6)remErrXcon(3)xcon(5)An integer value specifying the lowest priority defect that is allowed to generate a Fault Alarm (20.9.5), either: allDef(1) DefRDICCM, DefMACstatus, DefRemoteCCM, DefErrorCCM, and DefXconCCM; macRemErrXcon(2) Only DefMACstatus, DefRemoteCCM, DefErrorCCM, and DefXconCCM (default); remErrXcon(3) Only DefRemoteCCM, DefErrorCCM, and DefXconCCM; errXcon(4) Only DefErrorCCM and DefXconCCM; xcon(5) Only DefXconCCM; or noXcon(6) No defects DefXcon or lower are to be reported;
PrvtCfmMDLevelTCInteger32 (0..7)Display hint:
dInteger identifying the Maintenance Domain Level (MD Level). Higher numbers correspond to higher Maintenance Domains, those with the greatest physical reach, with the highest values for customers' CFM PDUs. Lower numbers correspond to lower Maintenance Domains, those with more limited physical reach, with the lowest values for CFM PDUs protecting single bridges or physical links.
PrvtCfmMaintAssocNameOCTET STRING (SIZE (1..22))Display hint:
45aDenotes a generic Maintenance Association Name. It is the part of the Maintenance Association Identifier which is unique within the Maintenance Domain Name and is appended to the Maintenance Domain Name to form the Maintenance Association Identifier (MAID). A PrvtCfmMaintAssocName value is always interpreted within the context of a PrvtCfmMaintAssocNameType value. Every usage of the PrvtCfmMaintAssocName textual convention is required to specify the PrvtCfmMaintAssocNameType object that provides the context. It is suggested that the PrvtCfmMaintAssocNameType object be logically registered before the object(s) that use the PrvtCfmMaintAssocName textual convention, if they appear in the same logical row. The value of a PrvtCfmMaintAssocName object must always be consistent with the value of the associated PrvtCfmMaintAssocNameType object. Attempts to set an PrvtCfmMaintAssocName object to a value inconsistent with the associated PrvtCfmMaintAssocNameType must fail with an inconsistentValue error. When this textual convention is used as the syntax of an index object, there may be issues with the limit of 128 sub-identifiers specified in SMIv2, IETF STD 58. In this case, the object definition MUST include a 'SIZE' clause to limit the number of potential instance sub-identifiers; otherwise the applicable constraints MUST be stated in the appropriate conceptual row DESCRIPTION clauses, or in the surrounding documentation if there is no single DESCRIPTION clause that is appropriate.
PrvtCfmMaintAssocNameOrNoneOCTET STRING (SIZE (0..22))Display hint:
22aSame as PrvtCfmMaintAssocName except that zero length string represents no association name.
PrvtCfmMaintAssocNameTypeINTEGERcharString(2)icc(32)primaryVid(1)A value that represents a type (and thereby the format) of a PrvtCfmMaintAssocName. The value can be one of the following: ieeeReserved(0) Reserved for definition by IEEE 802.1 recommend to not use zero unless absolutely needed. primaryVid(1) Primary VLAN ID. 12 bits represented in a 2-octet integer: - 4 least significant bits of the first byte contains the 4 most significant bits of the 12 bits primary VID - second byte contains the 8 least significant bits of the primary VID 0 1 2 3 4 5 6 7 8 +-+-+-+-+-+-+-+-+ |0 0 0 0| (MSB) | +-+-+-+-+-+-+-+-+ | VID LSB | +-+-+-+-+-+-+-+-+ charString(2) RFC2579 DisplayString, except that the character codes 0-31 (decimal) are not used. (1..45) octets unsignedInt16 (3) 2-octet integer/big endian rfc2865VpnId(4) RFC 2685 VPN ID 3 octet VPN authority Organizationally Unique Identifier followed by 4 octet VPN index identifying VPN according to the OUI: 0 1 2 3 4 5 6 7 8 +-+-+-+-+-+-+-+-+ | VPN OUI (MSB) | +-+-+-+-+-+-+-+-+ | VPN OUI | +-+-+-+-+-+-+-+-+ | VPN OUI (LSB) | +-+-+-+-+-+-+-+-+ |VPN Index (MSB)| +-+-+-+-+-+-+-+-+ | VPN Index | +-+-+-+-+-+-+-+-+ | VPN Index | +-+-+-+-+-+-+-+-+ |VPN Index (LSB)| +-+-+-+-+-+-+-+-+ ieeeReserved(xx) Reserved for definition by IEEE 802.1 xx values can be [5..31] and [64..255] ituReserved(xx) Reserved for definition by ITU-T Y.1731 xx values range from [32..63] To support future extensions, the PrvtCfmMaintAssocNameType textual convention SHOULD NOT be sub-typed in object type definitions. It MAY be sub-typed in compliance statements in order to require only a subset of these address types for a compliant implementation. Implementations must ensure that PrvtCfmMaintAssocNameType objects and any dependent objects (e.g., PrvtCfmMaintAssocName objects) are consistent. An inconsistentValue error must be generated if an attempt to change an PrvtCfmMaintAssocNameType object would, for example, lead to an undefined PrvtCfmMaintAssocName value. In particular, PrvtCfmMaintAssocNameType/PrvtCfmMaintAssocName pairs must be changed together if the nameType changes. The Maintenance Domain name and Maintenance Association name, when put together into the CCM PDU, MUST total 48 octets or less. If the PrvtCfmMaintDomainNameType object contains none(1), then the PrvtCfmMaintAssocName object MUST be 45 octets or less in length. Otherwise, the length of the PrvtCfmMaintDomainName object plus the length of the PrvtCfmMaintAssocName object, added together, MUST total less than or equal to 44 octets.
PrvtCfmMaintDomainNameOCTET STRING (SIZE (1..22))Display hint:
43aDenotes a generic Maintenance Domain Name. A PrvtCfmMaintDomainName value is always interpreted within the context of a PrvtCfmMaintDomainNameType value. Every usage of the PrvtCfmMaintDomainName textual convention is required to specify the PrvtCfmMaintDomainNameType object that provides the context. It is suggested that the PrvtCfmMaintDomainNameType object be logically registered before the object(s) that use the PrvtCfmMaintDomainName textual convention, if they appear in the same logical row. The value of a PrvtCfmMaintDomainName object must always be consistent with the value of the associated PrvtCfmMaintDomainNameType object. Attempts to set an PrvtCfmMaintDomainName object to a value inconsistent with the associated PrvtCfmMaintDomainNameType must fail with an inconsistentValue error. When this textual convention is used as the syntax of an index object, there may be issues with the limit of 128 sub-identifiers specified in SMIv2, IETF STD 58. In this case, the object definition MUST include a 'SIZE' clause to limit the number of potential instance sub-identifiers; otherwise the applicable constraints MUST be stated in the appropriate conceptual row DESCRIPTION clauses, or in the surrounding documentation if there is no single DESCRIPTION clause that is appropriate. A value of none(1) in the associated PrvtCfmMaintDomainNameType object means that no Maintenance Domain name is present, and the contents of the PrvtCfmMaintDomainName object are meaningless. See the DESCRIPTION of the PrvtCfmMaintAssocNameType TEXTUAL-CONVENTION for a discussion of the length limits on the Maintenance Domain name and Maintenance Association name.
PrvtCfmMaintDomainNameOrNoneOCTET STRING (SIZE (0..22))Display hint:
22aSame as PrvtCfmMaintDomainName except that zero length string represents no domain name.
PrvtCfmMaintDomainNameTypeINTEGERcharString(4)none(1)A value that represents a type (and thereby the format) of a PrvtCfmMaintDomainName. The value can be one of the following: ieeeReserved(0) Reserved for definition by IEEE 802.1 recommend to not use zero unless absolutely needed. none(1) No format specified, usually because there is not (yet) a Maintenance Domain Name. In this case, a zero length OCTET STRING for the Domain Name field is acceptable. dnsLikeName(2) Domain Name like string, globally unique text string derived from a DNS name. macAddrAndUint(3) MAC address + 2-octet (unsigned) integer. charString(4) RFC2579 DisplayString, except that the character codes 0-31 (decimal) are not used. ieeeReserved(xx) Reserved for definition by IEEE 802.1 xx values can be [5..31] and [64..255] ituReserved(xx) Reserved for definition by ITU-T Y.1731 xx values range from [32..63] To support future extensions, the PrvtCfmMaintDomainNameType textual convention SHOULD NOT be sub-typed in object type definitions. It MAY be sub-typed in compliance statements in order to require only a subset of these address types for a compliant implementation. Implementations must ensure that PrvtCfmMaintDomainNameType objects and any dependent objects (e.g., PrvtCfmMaintDomainName objects) are consistent. An inconsistentValue error must be generated if an attempt to change an PrvtCfmMaintDomainNameType object would, for example, lead to an undefined PrvtCfmMaintDomainName value. In particular, PrvtCfmMaintDomainNameType/PrvtCfmMaintDomainName pairs must be changed together if the nameType changes.
PrvtCfmMepIdUnsigned32 (1..8191)Display hint:
dMaintenance association End Point Identifier (MEPID): A small integer, unique over a given Maintenance Association, identifying a specific MEP.
PrvtCfmMepIdOrZeroUnsigned32 (0..8191)Display hint:
dMaintenance association End Point Identifier (MEPID): A small integer, unique over a given Maintenance Association, identifying a specific MEP. The special value 0 is allowed to indicate special cases, for example that no MEPID is configured. Whenever an object is defined with this SYNTAX, then the DESCRIPTION clause of such an object MUST specify what the special value of 0 means.
PrvtCfmMhfCreationINTEGERdefMHFdefault(2)defMHFdefer(4)defMHFexplicit(3)defMHFnone(1)Indicates if the Management Entity can create MHFs. The valid values are: defMHFnone(1) No MHFs can be created for this VID. defMHFdefault(2) MHFs can be created on this VID on any Bridge port through which this VID can pass. defMHFexplicit(3) MHFs can be created for this VID only on Bridge ports through which this VID can pass, and only if a MEP is created at some lower MD Level. defMHFdefer(4) The creation of MHFs is determined by the corresponding Maintenance Domain variable (prvtCfmMaMhfCreation).
PrvtCfmMhfCreationDefINTEGERdefMHFdefault(2)defMHFexplicit(3)defMHFnone(1)Indicates if the Management Entity can create MHFs. The valid values are: defMHFnone(1) No MHFs can be created for this VID. defMHFdefault(2) MHFs can be created on this VID on any Bridge port through which this VID can pass. defMHFexplicit(3) MHFs can be created for this VID only on Bridge ports through which this VID can pass, and only if a MEP is created at some lower MD Level. defMHFdefer(4) The creation of MHFs is determined by the corresponding Maintenance Domain variable (prvtCfmMaMhfCreation).
PrvtCfmMpDirectionINTEGERdown(1)up(2)Indicates the direction in which the Maintenance association (MEP or MIP) faces on the bridge port: down(1) Sends Continuity Check Messages away from the MAC Relay Entity. up(2) Sends Continuity Check Messages towards the MAC Relay Entity.
PrvtCfmPortStatusINTEGERpsBlocked(1)psNoPortStateTLV(0)psUp(2)An enumerated value from he Port Status TLV from the last CCM received from the last MEP. It indicates the ability of the Bridge Port on which the transmitting MEP resides to pass ordinary data, regardless of the status of the MAC (Table 21-10). psNoPortStateTLV(0) Indicates either that no CCM has been received or that no port status TLV was present in the last CCM received. psBlocked(1) Ordinary data cannot pass freely through the port on which the remote MEP resides. Value of enableRmepDefect is equal to false. psUp(2): Ordinary data can pass freely through the port on which the remote MEP resides. Value of enableRmepDefect is equal to true. NOTE: A 0 value is used for psNoPortStateTLV, so that additional code points can be added in a manner consistent with the PrvtCfmInterfaceStatus textual convention.
PrvtCfmRelayActionFieldValueINTEGERrlyFdb(2)rlyHit(1)rlyMpdb(3)Possible values the Relay action field can take.
PrvtCfmRemoteMepStateINTEGERrMepFailed(3)rMepIdle(1)rMepOk(4)rMepStart(2)Operational state of the remote MEP state machine. This state machine monitors the reception of valid CCMs from a remote MEP with a specific MEPID. It uses a timer that expires in 3.5 times the length of time indicated by the PrvtCfmMaCcmInterval object. rMepIdle(1) Momentary state during reset. rMepStart(2) The timer has not expired since the state machine was reset, and no valid CCM has yet been received. rMepFailed(3) The timer has expired, both since the state machine was reset, and since a valid CCM was received. rMepOk(4) The timer has not expired since a valid CCM was received.
Traps / Notifications
- prvtCfm1wJitterThreshold
1.3.6.1.4.1.738.10.5.131.0.1 - prvtCfmAisLckCleared
1.3.6.1.4.1.738.10.5.131.0.8 - prvtCfmAisLckRecieved
1.3.6.1.4.1.738.10.5.131.0.7 - prvtCfmFaultAlarm
1.3.6.1.4.1.738.10.5.131.0.6 - prvtCfmFaultAlarmCleared
1.3.6.1.4.1.738.10.5.131.0.9 - prvtCfmFrameLossThreshold
1.3.6.1.4.1.738.10.5.131.0.3 - prvtCfmJitterThreshold
1.3.6.1.4.1.738.10.5.131.0.2 - prvtCfmLatencyThreshold
1.3.6.1.4.1.738.10.5.131.0.4 - prvtCfmUnexpectedPriority
1.3.6.1.4.1.738.10.5.131.0.5