PRVT-SWITCH-ACCESS-LIST-MIB
B.A.T.M. Advance TechnologiesThe access-list MIB module that controls L3 switches access-list parameters
snmptranslate -m PRVT-SWITCH-ACCESS-LIST-MIB -Tpsnmpwalk -v2c -c <community> -m PRVT-SWITCH-ACCESS-LIST-MIB <host> 1.3.6.1.4.1.738.1.6.1Imports
| IF-MIB | ifIndex |
|---|---|
| PRVT-SERV-MIB | sapEncapValue, sapPortId, sdpId, svcId |
| PRVT-SWITCH-MIB | ipSwitch |
| Q-BRIDGE-MIB | dot1qVlanIndex, dot1qVlanStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IprvtSwitchAccessListMib | 1.3.6.1.4.1.738.1.6.1 | |||
identity The access-list MIB module that controls L3 switches access-list parameters | ||||
| NprvtSwitchAccessListNotifications | 1.3.6.1.4.1.738.1.6.1.0 | |||
| !standardAccessListRuleMatched | 1.3.6.1.4.1.738.1.6.1.0.1 | |||
notification · current This trap indicates that a packet matching a standard ACL rule has been received. | ||||
| !extendedAccessListRuleMatched | 1.3.6.1.4.1.738.1.6.1.0.2 | |||
notification · current This trap indicates that a packet matching an extended ACL rule has been received. | ||||
| !macAccessListRuleMatched | 1.3.6.1.4.1.738.1.6.1.0.3 | |||
notification · current This trap indicates that a packet matching a mac ACL rule has been received.
| ||||
| !etherTypeAccessListRuleMatched | 1.3.6.1.4.1.738.1.6.1.0.4 | |||
notification · current This trap indicates that a packet matching a ether-type ACL rule has been received. | ||||
| NaccessLists | 1.3.6.1.4.1.738.1.6.1.1 | |||
| SaccessListTemplate | 1.3.6.1.4.1.738.1.6.1.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The access-list template in use. For non E-series devices, the device must be restarted for this setting to take effect.
| ||||
| NaccessGroupsDefinitions | 1.3.6.1.4.1.738.1.6.1.1.2 | |||
| TaccessListControlTable | 1.3.6.1.4.1.738.1.6.1.1.2.1 | NA | ||
table · not-accessible · current This table controls the creation or removal of a access-list group from all access-list tables. The real programming of values is done in the coresponding access-list table. | ||||
| RaccessListControlEntry | 1.3.6.1.4.1.738.1.6.1.1.2.1.1 | NA | ||
row · not-accessible · current An entry in the accessListControlTable table. | ||||
| CaccessListControlListGroup | 1.3.6.1.4.1.738.1.6.1.1.2.1.1.1 | INTEGER (1..65535) | AN | |
column · INTEGER (1..65535) · accessible-for-notify · current This object identifies the index of the group of access-list rules Each range of group indexes is related to a different access-list type 1..99 for standard access-list 100..199 for extended access-list. | ||||
| CaccessListControlRowStatus | 1.3.6.1.4.1.738.1.6.1.1.2.1.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current This indicates the row status & enables creation & deletion of lines in this table. See SNMPv2-TC for more information. | ||||
| TstandardAccessListTable | 1.3.6.1.4.1.738.1.6.1.1.2.2 | NA | ||
table · not-accessible · current This table contains standard access-list parameters. | ||||
| RstandardAccessListEntry | 1.3.6.1.4.1.738.1.6.1.1.2.2.1 | NA | ||
row · not-accessible · current An entry in the standardAccessListTable table. | ||||
| CstandardAccessListIndex | 1.3.6.1.4.1.738.1.6.1.1.2.2.1.1 | INTEGER (1..65535) | NA | |
column · INTEGER (1..65535) · not-accessible · current Index of the particular rule of the group. | ||||
| CstandardAccessListAction | 1.3.6.1.4.1.738.1.6.1.1.2.2.1.2 | AccessListAction | RC | |
column · AccessListAction · read-create · current The action to preform if the condition of this access-list rule condition is true. | ||||
| CstandardAccessListIpSrc | 1.3.6.1.4.1.738.1.6.1.1.2.2.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The IP source address associated with this flow. | ||||
| CstandardAccessListIpMASKsrc | 1.3.6.1.4.1.738.1.6.1.1.2.2.1.4 | IpAddress | RC | |
column · IpAddress · read-create · current The IP mask that, together with standardAccessListIpSrc, defines the subnet. | ||||
| CstandardAccessListRemark | 1.3.6.1.4.1.738.1.6.1.1.2.2.1.5 | AccessListRemarkString | RC | |
column · AccessListRemarkString · read-create · current Access list entry comment | ||||
| CstandardAccessListLog | 1.3.6.1.4.1.738.1.6.1.1.2.2.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Enable normal or extended logging of this access-list rule.
| ||||
| CstandardAccessListVpt | 1.3.6.1.4.1.738.1.6.1.1.2.2.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current This object is meaningful : 1.when vlan-priority template is used and will reprezent vlan priority tag. 2.Forwarding class reprezented in the second part of enumeration: fc-##. A value of 8 means that neither of above is defined.
| ||||
| CstandardAccessListRowStatus | 1.3.6.1.4.1.738.1.6.1.1.2.2.1.8 | RowStatus | RW | |
column · RowStatus · read-write · current This indicates the row status & enables creation of rows in this table. In order to be consistent with ACL policy, this object does not allow deletion of rules. The entire group must be deleted and all rules removed at once. | ||||
| CstandardAccessListVlanId | 1.3.6.1.4.1.738.1.6.1.1.2.2.1.9 | INTEGER (0..4092) | RC | |
column · INTEGER (0..4092) · read-create · current This object shows the customer VLAN. The object is meaningful only if standardAccessListVlanMask is set. | ||||
| CstandardAccessListVlanMask | 1.3.6.1.4.1.738.1.6.1.1.2.2.1.10 | DisplayString | RC | |
column · DisplayString · read-create · current This object shows the customer VLAN mask. It is meaningful only if standardAccessListVlanId is set. The value is in hexadecimal type DisplayString (0xXXX). | ||||
| CstandardAccessListProviderVlanId | 1.3.6.1.4.1.738.1.6.1.1.2.2.1.11 | INTEGER (0..4092) | RC | |
column · INTEGER (0..4092) · read-create · current This object shows the provider VLAN. The object is meaningful only if standardAccessListProviderVlanMask is set. | ||||
| CstandardAccessListProviderVlanMask | 1.3.6.1.4.1.738.1.6.1.1.2.2.1.12 | DisplayString | RC | |
column · DisplayString · read-create · current This object shows the provider VLAN mask. It is meaningful only if standardAccessListProviderVlanId is set. The value is in hexadecimal type DisplayString (0xXXX) | ||||
| CstandardAccessListProviderVpt | 1.3.6.1.4.1.738.1.6.1.1.2.2.1.13 | INTEGER (0..8) | RC | |
column · INTEGER (0..8) · read-create · current This object shows the provider VLAN priority tag. A value of 8 means undefined. | ||||
| CstandardAccessListUntaggedMode | 1.3.6.1.4.1.738.1.6.1.1.2.2.1.14 | TruthValue | RC | |
column · TruthValue · read-create · current This object enables the untagged mode | ||||
| CstandardAccessListDropLevel | 1.3.6.1.4.1.738.1.6.1.1.2.2.1.15 | INTEGER | RC | |
column · INTEGER · read-create · current This object define drop-level.
| ||||
| CstandardAccessListDscp | 1.3.6.1.4.1.738.1.6.1.1.2.2.1.16 | INTEGER (0..63) | RC | |
column · INTEGER (0..63) · read-create · current The object shows the DiffServ Point (DSCP) value from IP header. | ||||
| TextendedAccessListTable | 1.3.6.1.4.1.738.1.6.1.1.2.3 | NA | ||
table · not-accessible · current This table contains extended access-list parameters. | ||||
| RextendedAccessListEntry | 1.3.6.1.4.1.738.1.6.1.1.2.3.1 | NA | ||
row · not-accessible · current An entry in the extendedAccessListTable table. | ||||
| CextendedAccessListIndex | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.1 | INTEGER (1..65535) | NA | |
column · INTEGER (1..65535) · not-accessible · current Index of the particular rule of the group. | ||||
| CextendedAccessListAction | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.2 | AccessListAction | RC | |
column · AccessListAction · read-create · current The action to preform if this access-list rule condition is true. | ||||
| CextendedAccessListIpProtocol | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.3 | IpProtocol | RC | |
column · IpProtocol · read-create · current The IP protocol number (see IpProtocol). | ||||
| CextendedAccessListIpSrc | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.4 | IpAddress | RC | |
column · IpAddress · read-create · current The IP source address associated with this flow. | ||||
| CextendedAccessListIpMASKsrc | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.5 | IpAddress | RC | |
column · IpAddress · read-create · current The IP mask, together with extendendAccessListIpSrc, defines the subnet. | ||||
| CextendedAccessListPortDefSrc | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.6 | PortDef | RC | |
column · PortDef · read-create · current The extendedAccessListPortDefSrc object operates together with the port number filed inside the access-list & controls how the port number is being processed. The values less-than(3) and greater-than(4) are supported only on E-Series family boards. | ||||
| CextendedAccessListPortNumSrc | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.7 | INTEGER (0..65535) | RC | |
column · INTEGER (0..65535) · read-create · current UDP/TCP port number. A value of 0 represents undefined port number. | ||||
| CextendedAccessListPortRangeSrc | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.8 | INTEGER (0..65535) | RC | |
column · INTEGER (0..65535) · read-create · current UDP/TCP ned range port number. A value of 0 represents undefined port number. Valid only with extendedAccessListPortDefSrc value of range(2). | ||||
| CextendedAccessListIpDest | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.9 | IpAddress | RC | |
column · IpAddress · read-create · current The IP destination address associated with this flow. | ||||
| CextendedAccessListIpMASKdst | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.10 | IpAddress | RC | |
column · IpAddress · read-create · current The IP mask, together with extendedAccessListIpMASKdst, defines the subnet. | ||||
| CextendedAccessListPortDefDst | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.11 | PortDef | RC | |
column · PortDef · read-create · current The extendedAccessListPortDefDst object operates together with the port number filed inside the access-list & controls how the port number is being processed. The values less-than(3) and greater-than(4) are supported only on E-Series family boards. | ||||
| CextendedAccessListPortNumDst | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.12 | INTEGER (0..65535) | RC | |
column · INTEGER (0..65535) · read-create · current UDP/TCP port number. A value of 0 represents undefined port number. | ||||
| CextendedAccessListPortRangeDst | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.13 | INTEGER (0..65535) | RC | |
column · INTEGER (0..65535) · read-create · current UDP/TCP ned range port number. A value of 0 represents undefined port number. Valid for value range (2) of extendedAccessListPortDefDst. | ||||
| CextendedAccessListTos | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.14 | INTEGER (0..15) | RC | |
column · INTEGER (0..15) · read-create · current This object shows the type of service value. | ||||
| CextendedAccessListPrec | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.15 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current Precedence value. | ||||
| CextendedAccessListModifyTos | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.16 | AccessListModifyTos | RC | |
column · AccessListModifyTos · read-create · current extendedAccessListModifyTos must be enabled if the user wants the ToS to be modified. | ||||
| CextendedAccessListRemark | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.17 | AccessListRemarkString | RC | |
column · AccessListRemarkString · read-create · current Access list entry comment. | ||||
| CextendedAccessListIcmpType | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.18 | INTEGER (0..255) | RC | |
column · INTEGER (0..255) · read-create · current ICMP message type. | ||||
| CextendedAccessListIcmpCode | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.19 | INTEGER (0..255) | RC | |
column · INTEGER (0..255) · read-create · current ICMP message code. | ||||
| CextendedAccessListIgmpType | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.20 | INTEGER (0..15) | RC | |
column · INTEGER (0..15) · read-create · current IGMP message type. This object is not supported in E-Series | ||||
| CextendedAccessListEstablished | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.21 | AccessListEstablished | RC | |
column · AccessListEstablished · read-create · current When TCP protocol type is chosen, setting this object indicates that established connections will be matched. | ||||
| CextendedAccessListLog | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.22 | INTEGER | RC | |
column · INTEGER · read-create · current Enable normal or extended logging of this access-list rule.
| ||||
| CextendedAccessListVpt | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.23 | INTEGER | RC | |
column · INTEGER · read-create · current This object is meaningful : 1.when vlan-priority template is used and will reprezent vlan priority tag. 2.Forwarding class reprezented in the second part of enumeration: fc-##. A value of 8 means that neither of above is defined.
| ||||
| CextendedAccessListRowStatus | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.24 | RowStatus | RW | |
column · RowStatus · read-write · current This indicates the row status & enables creation of lines in this table. In order to be consistent with ACL policy, this object does not allow deletion of rules. The entire group must be deleted and all rules removed at once. | ||||
| CextendedAccessListVlanId | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.25 | INTEGER (0..4092) | RC | |
column · INTEGER (0..4092) · read-create · current This object shows the customer VLAN. The object is meaningful only if extendedAccessListVlanMask is set. | ||||
| CextendedAccessListVlanMask | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.26 | DisplayString | RC | |
column · DisplayString · read-create · current This object shows the customer VLAN mask. It is meaningful only if extendedAccessListVlanId is set. The value is in hexadecimal type string(0x..). | ||||
| CextendedAccessListProviderVlanId | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.27 | INTEGER (0..4092) | RC | |
column · INTEGER (0..4092) · read-create · current This object shows the provider VLAN. The object is meaningful only if extendedAccessListProviderVlanMask is set. | ||||
| CextendedAccessListProviderVlanMask | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.28 | DisplayString | RC | |
column · DisplayString · read-create · current This object shows the provider VLAN mask. It is meaningful only if extendedAccessListProviderVlanId is set. The value is in hexadecimal type string(0x..). | ||||
| CextendedAccessListProviderVpt | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.29 | INTEGER (0..8) | RC | |
column · INTEGER (0..8) · read-create · current This object shows the provider VLAN priority tag. A value of 8 means undefined. This object is meaningful only if vlan-priority template is used. | ||||
| CextendedAccessListUntaggedMode | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.30 | TruthValue | RC | |
column · TruthValue · read-create · current This object enables the untagged mode. | ||||
| CextendedAccessListDropLevel | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.31 | INTEGER | RC | |
column · INTEGER · read-create · current This object define drop-level.
| ||||
| CextendedAccessListDscp | 1.3.6.1.4.1.738.1.6.1.1.2.3.1.32 | INTEGER (0..63) | RC | |
column · INTEGER (0..63) · read-create · current The object shows the DiffServ Point (DSCP) value from IP header. | ||||
| TmacAccessListTable | 1.3.6.1.4.1.738.1.6.1.1.2.4 | NA | ||
table · not-accessible · current This table contains MAC access-list parameters. | ||||
| RmacAccessListEntry | 1.3.6.1.4.1.738.1.6.1.1.2.4.1 | NA | ||
row · not-accessible · current An entry in the macAccessListTable table. | ||||
| CmacAccessListIndex | 1.3.6.1.4.1.738.1.6.1.1.2.4.1.1 | INTEGER (1..65535) | NA | |
column · INTEGER (1..65535) · not-accessible · current Index of the particular rule of the group. | ||||
| CmacAccessListAction | 1.3.6.1.4.1.738.1.6.1.1.2.4.1.2 | AccessListAction | RC | |
column · AccessListAction · read-create · current The action to preform if this access-list rule condition is true. | ||||
| CmacAccessListMacSrc | 1.3.6.1.4.1.738.1.6.1.1.2.4.1.3 | MacAddress | RC | |
column · MacAddress · read-create · current The object contains the MAC address of source. If this object is not set, the result is 'any' source mac address. If object macAccessListMacSrcMask is not set, this object means the host address. | ||||
| CmacAccessListMacSrcMask | 1.3.6.1.4.1.738.1.6.1.1.2.4.1.4 | MacAddress | RC | |
column · MacAddress · read-create · current This object contains the mask for MAC source address. The object affects macAccessListMacSrc, defines host or range. | ||||
| CmacAccessListMacDst | 1.3.6.1.4.1.738.1.6.1.1.2.4.1.5 | MacAddress | RC | |
column · MacAddress · read-create · current The object contains the MAC address of destination. If this object is not set, the result is 'any' destination mac address. If object macAccessListMacDstMask is not set, this object means the host address. | ||||
| CmacAccessListMacDstMask | 1.3.6.1.4.1.738.1.6.1.1.2.4.1.6 | MacAddress | RC | |
column · MacAddress · read-create · current This object contains the mask for MAC destination address. The object affects macAccessListMacDst, defines host or range. | ||||
| CmacAccessListRemark | 1.3.6.1.4.1.738.1.6.1.1.2.4.1.7 | AccessListRemarkString | RC | |
column · AccessListRemarkString · read-create · current Access list entry comment | ||||
| CmacAccessListLog | 1.3.6.1.4.1.738.1.6.1.1.2.4.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current Enable normal or extended logging of this access-list rule.
| ||||
| CmacAccessListRowStatus | 1.3.6.1.4.1.738.1.6.1.1.2.4.1.9 | RowStatus | RW | |
column · RowStatus · read-write · current This indicates the row status & enables creation of rows in this table. In order to be consistent with ACL policy, this object does not allow deletion of rules. The entire group must be deleted and all rules removed at once. | ||||
| CmacAccessListTos | 1.3.6.1.4.1.738.1.6.1.1.2.4.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current This object shows the type of service value. | ||||
| CmacAccessListPrecedence | 1.3.6.1.4.1.738.1.6.1.1.2.4.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current This object shows the precedence value. The parameter is matched for IP traffic only. The value is in the range between <0-8>. When precendence is disable the object will take 8 value. | ||||
| CmacAccessListVpt | 1.3.6.1.4.1.738.1.6.1.1.2.4.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current This object is meaningful : 1.when vlan-priority template is used and will reprezent vlan priority tag. 2.Forwarding class reprezented in the second part of enumeration: fc-##. A value of 8 means that neither of above is defined.
| ||||
| CmacAccessListVlanId | 1.3.6.1.4.1.738.1.6.1.1.2.4.1.13 | INTEGER (0..4092) | RC | |
column · INTEGER (0..4092) · read-create · current This object shows the customer VLAN. The object is meaningful only if macAccessListVlanMask is set. | ||||
| CmacAccessListVlanMask | 1.3.6.1.4.1.738.1.6.1.1.2.4.1.14 | DisplayString | RC | |
column · DisplayString · read-create · current This object shows the customer VLAN mask. It is meaningful only if macAccessListVlanId is set. The value is in hexadecimal type string(0x..). | ||||
| CmacAccessListInnerVlanId | 1.3.6.1.4.1.738.1.6.1.1.2.4.1.15 | INTEGER (0..4092) | RC | |
column · INTEGER (0..4092) · read-create · current This object shows the provider VLAN. The object is meaningful only if macAccessListProviderVlanMask is set. | ||||
| CmacAccessListInnerVlanMask | 1.3.6.1.4.1.738.1.6.1.1.2.4.1.16 | DisplayString | RC | |
column · DisplayString · read-create · current This object shows the provider VLAN mask. It is meaningful only if macAccessListProviderVlanId is set. The value is in hexadecimal type string(0x..). | ||||
| CmacAccessListInnerVpt | 1.3.6.1.4.1.738.1.6.1.1.2.4.1.17 | INTEGER (0..8) | RC | |
column · INTEGER (0..8) · read-create · current This object shows the provider VLAN priority tag. A value of 8 means undefined | ||||
| CmacAccessListEtherType | 1.3.6.1.4.1.738.1.6.1.1.2.4.1.18 | DisplayString | RC | |
column · DisplayString · read-create · current The object shows the EtherType field in the Ethernet header. The field is matched only for non-IP and non-ARP traffic only. | ||||
| CmacAccessListDscp | 1.3.6.1.4.1.738.1.6.1.1.2.4.1.19 | INTEGER | RC | |
column · INTEGER · read-create · current The object shows the DiffServ Point (DSCP) value from IP header. | ||||
| CmacAccessListMatchTraffic | 1.3.6.1.4.1.738.1.6.1.1.2.4.1.20 | MatchTraffic | RC | |
column · MatchTraffic · read-create · current This object shows the type of traffic to match. | ||||
| CmacAccessListMatchTrafficPort | 1.3.6.1.4.1.738.1.6.1.1.2.4.1.21 | DisplayString | RC | |
column · DisplayString · read-create · current This object is meaningful only if macAccessListMatchTraffic is set to 'known-unicast' value - else returns error. The values are of types PORTLIST (for example 1/1/1-1/1/4,1/1/6) | ||||
| CmacAccessListUntaggedMode | 1.3.6.1.4.1.738.1.6.1.1.2.4.1.22 | TruthValue | RC | |
column · TruthValue · read-create · current This object enables the untagged mode. | ||||
| CmacAccessListDropLevel | 1.3.6.1.4.1.738.1.6.1.1.2.4.1.23 | INTEGER | RC | |
column · INTEGER · read-create · current This object define drop-level.
| ||||
| TetherTypeAccessListTable | 1.3.6.1.4.1.738.1.6.1.1.2.5 | NA | ||
table · not-accessible · current This table contains extended MAC access-list parameters. | ||||
| RetherTypeAccessListEntry | 1.3.6.1.4.1.738.1.6.1.1.2.5.1 | NA | ||
row · not-accessible · current An entry in the etherTypeAccessListTable table. | ||||
| CetherTypeAccessListIndex | 1.3.6.1.4.1.738.1.6.1.1.2.5.1.1 | INTEGER (1..65535) | NA | |
column · INTEGER (1..65535) · not-accessible · current Index of the particular rule of the group. | ||||
| CetherTypeAccessListAction | 1.3.6.1.4.1.738.1.6.1.1.2.5.1.2 | AccessListAction | RC | |
column · AccessListAction · read-create · current The action to preform if this access-list rule condition is true. | ||||
| CetherTypeAccessListEtherType | 1.3.6.1.4.1.738.1.6.1.1.2.5.1.3 | DisplayString | RC | |
column · DisplayString · read-create · current The IP protocol number (see IpProtocol). | ||||
| CetherTypeAccessListEtherTypeCodeMask | 1.3.6.1.4.1.738.1.6.1.1.2.5.1.4 | DisplayString | RC | |
column · DisplayString · read-create · current The IP source address associated with this flow. | ||||
| CetherTypeAccessListRemark | 1.3.6.1.4.1.738.1.6.1.1.2.5.1.5 | AccessListRemarkString | RC | |
column · AccessListRemarkString · read-create · current Access list entry comment | ||||
| CetherTypeAccessListLog | 1.3.6.1.4.1.738.1.6.1.1.2.5.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Enable normal or extended logging of this access-list rule.
| ||||
| CetherTypeAccessListRowStatus | 1.3.6.1.4.1.738.1.6.1.1.2.5.1.7 | RowStatus | RW | |
column · RowStatus · read-write · current This indicates the row status & enables creation of rows in this table. In order to be consistent with ACL policy, this object does not allow deletion of rules. The entire group must be deleted and all rules removed at once. | ||||
| CetherTypeAccessListVlanId | 1.3.6.1.4.1.738.1.6.1.1.2.5.1.8 | INTEGER (0..4092) | RC | |
column · INTEGER (0..4092) · read-create · current This object shows the customer VLAN.The object is meaningful only if etherTypeAccessListVlanMask is set. | ||||
| CetherTypeAccessListVlanMask | 1.3.6.1.4.1.738.1.6.1.1.2.5.1.9 | DisplayString | RC | |
column · DisplayString · read-create · current This object shows the customer VLAN mask. It is meaningful only if etherTypeAccessListVlanId is set. | ||||
| CetherTypeAccessListProviderVlanId | 1.3.6.1.4.1.738.1.6.1.1.2.5.1.10 | INTEGER (0..4092) | RC | |
column · INTEGER (0..4092) · read-create · current This object shows the provider VLAN. The object is meaningful only if etherTypeAccessListProviderVlanMask is set. | ||||
| CetherTypeAccessListProviderVlanMask | 1.3.6.1.4.1.738.1.6.1.1.2.5.1.11 | DisplayString | RC | |
column · DisplayString · read-create · current This object shows the provider VLAN mask. It is meaningful only if etherTypeAccessListProviderVlanId is set. The value is in hexadecimal type string (0x..). | ||||
| CetherTypeAccessListProviderVpt | 1.3.6.1.4.1.738.1.6.1.1.2.5.1.12 | INTEGER (0..8) | RC | |
column · INTEGER (0..8) · read-create · current The vlan priority tag. A value of 8 means undefined. This object is meaningful only if vlan-priority template is used. | ||||
| NaccessListsInterfaces | 1.3.6.1.4.1.738.1.6.1.1.3 | |||
| TaccessListInterfaceTable | 1.3.6.1.4.1.738.1.6.1.1.3.1 | NA | ||
table · not-accessible · current This table controls the assigment of access groups to an interface. | ||||
| RaccessListInterfaceEntry | 1.3.6.1.4.1.738.1.6.1.1.3.1.1 | NA | ||
row · not-accessible · current An entry in the AccessListInterfaceEntry table. | ||||
| CaccessListInterfaceTableIndex | 1.3.6.1.4.1.738.1.6.1.1.3.1.1.1 | INTEGER (1..65535) | NA | |
column · INTEGER (1..65535) · not-accessible · current This object identifies the row number for this (ifIndex) interface. | ||||
| CaccessListInterfaceGroupIndex | 1.3.6.1.4.1.738.1.6.1.1.3.1.1.2 | INTEGER (1..65535) | NA | |
column · INTEGER (1..65535) · not-accessible · current This indicates the index of the access group for this interface. This value is the same as the value of accessListControlListGroup for the assigned ACL. | ||||
| CaccessListInterfaceDscp | 1.3.6.1.4.1.738.1.6.1.1.3.1.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Enable Diffserv codepoint.
| ||||
| CaccessListInterfaceRowStatus | 1.3.6.1.4.1.738.1.6.1.1.3.1.1.4 | RowStatus | RW | |
column · RowStatus · read-write · current This indicates the row status & enables creation & deletion of lines in this (and related) tables. See SNMPv2-TC for more information. | ||||
| CaccessListInterfacePriority | 1.3.6.1.4.1.738.1.6.1.1.3.1.1.5 | INTEGER (0..8) | RW | |
column · INTEGER (0..8) · read-write · current Priority level value. Valid values are 0 to 7, 8 means undefined. | ||||
| CaccessListInterfaceDiscard | 1.3.6.1.4.1.738.1.6.1.1.3.1.1.6 | AccessListDiscard | RW | |
column · AccessListDiscard · read-write · current Mark discardable or normal for priority on access group Only the E-Series family and the G-Series family boards support the values green, yellow and red. Other values are not supported by the E-Series and G-series. | ||||
| CaccessListInterfaceRateLimit | 1.3.6.1.4.1.738.1.6.1.1.3.1.1.7 | Rate | RW | |
column · Rate · read-write · current The maximum rate in kBps(kilobytes per second) | ||||
| CaccessListInterfaceExceedAction | 1.3.6.1.4.1.738.1.6.1.1.3.1.1.8 | ExceedAction | RW | |
column · ExceedAction · read-write · current The action to perform when the condition is true. | ||||
| CaccessListInterfaceShaper | 1.3.6.1.4.1.738.1.6.1.1.3.1.1.9 | Shaper | RW | |
column · Shaper · read-write · current Enable/disable shaper. This object is supported only in B-series. | ||||
| CaccessListInterfaceBurst | 1.3.6.1.4.1.738.1.6.1.1.3.1.1.10 | Rate | RW | |
column · Rate · read-write · current The maximum Burst rate in kBps(kilobytes per second). This object is supported only by E-Series and G-series. | ||||
| CaccessListInterfaceRedirectIfIndex | 1.3.6.1.4.1.738.1.6.1.1.3.1.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current This object controls redirection of traffic matching this ACG. If the value is a valid ifIndex, the traffic will be redirected to it. If the value is 0 redirection is disabled. Setting this object requires that accessListInterfaceRedirectVlanID is also set. | ||||
| CaccessListInterfaceRedirectVlanID | 1.3.6.1.4.1.738.1.6.1.1.3.1.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current This object controls redirection of traffic matching this ACG. If the value is a valid VLAN ID, the traffic will be redirected to it. If the value is 0 redirection is disabled. If the device is TMetro, this object sets the tag substitution policy for this access group | ||||
| CaccessListInterfaceRedirectNexthop | 1.3.6.1.4.1.738.1.6.1.1.3.1.1.13 | IpAddress | RW | |
column · IpAddress · read-write · current This object controls redirection of traffic matching this ACG. If the value is a valid IP address then the traffic will be redirected to it. If the value is 0 redirection is disabled. | ||||
| CaccessListInterfacePeakRate | 1.3.6.1.4.1.738.1.6.1.1.3.1.1.14 | Rate | RW | |
column · Rate · read-write · current Peak Information Rate in kBps(kilobytes per second). | ||||
| CaccessListInterfacePeakBurst | 1.3.6.1.4.1.738.1.6.1.1.3.1.1.15 | Rate | RW | |
column · Rate · read-write · current Peak Burst Size in kBps(kilobytes per second). | ||||
| CaccessListInterfaceColorAware | 1.3.6.1.4.1.738.1.6.1.1.3.1.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current Toggle Color aware traffic metering. Disabled by default.
| ||||
| CaccessListInterfacePolicy | 1.3.6.1.4.1.738.1.6.1.1.3.1.1.17 | INTEGER | RW | |
column · INTEGER · read-write · current Set remarking policy.
| ||||
| CaccessListInterfaceTrafficClass | 1.3.6.1.4.1.738.1.6.1.1.3.1.1.18 | INTEGER (0..256) | RW | |
column · INTEGER (0..256) · read-write · current Diff Serv CP - Type of Service In E-Series and G-series the range is 0..63. A value of 256 means Traffic Class is not set. | ||||
| CaccessListInterfaceSpanRootTrack | 1.3.6.1.4.1.738.1.6.1.1.3.1.1.19 | INTEGER | RC | |
column · INTEGER · read-create · current The span root track option for VLAN redirects.
| ||||
| CaccessListInterfaceUntagFilter | 1.3.6.1.4.1.738.1.6.1.1.3.1.1.20 | INTEGER | RC | |
column · INTEGER · read-create · current The filter for tagged or untagged backets to be applied.
| ||||
| CaccessListInterfaceTxq | 1.3.6.1.4.1.738.1.6.1.1.3.1.1.21 | INTEGER | RC | |
column · INTEGER · read-create · current This object performs QoS and remarking of traffic matching an ACG | ||||
| CaccessListInterfaceTxqDropLevel | 1.3.6.1.4.1.738.1.6.1.1.3.1.1.22 | TxqDropLevel | RC | |
column · TxqDropLevel · read-create · current This object shows the drop-level (green/yellow) and is related to accessListInterfaceTxq. | ||||
| CaccessListInterfaceApplyMirror | 1.3.6.1.4.1.738.1.6.1.1.3.1.1.23 | TruthValue | RC | |
column · TruthValue · read-create · current This object shows that the traffic on the interface will be mirrored | ||||
| CaccessListInterfaceStatistics | 1.3.6.1.4.1.738.1.6.1.1.3.1.1.24 | AccessListStatistics | RC | |
column · AccessListStatistics · read-create · current This object enables statistics on the interface. | ||||
| CaccessListInterfaceDirection | 1.3.6.1.4.1.738.1.6.1.1.3.1.1.25 | AccessListDirection | RC | |
column · AccessListDirection · read-create · current This object determines the ingress-egress type of applied ACL. | ||||
| CaccessListInterfaceRateStatistics | 1.3.6.1.4.1.738.1.6.1.1.3.1.1.26 | AccessListStatistics | RC | |
column · AccessListStatistics · read-create · current This object enables rate statistics on the interface. | ||||
| NaccessListsVLAN | 1.3.6.1.4.1.738.1.6.1.1.4 | |||
| TaccessListVLANTable | 1.3.6.1.4.1.738.1.6.1.1.4.1 | NA | ||
table · not-accessible · current This table controls the assignment of access groups to a VLAN. | ||||
| RaccessListVLANEntry | 1.3.6.1.4.1.738.1.6.1.1.4.1.1 | NA | ||
row · not-accessible · current An entry in the AccessListVLANEntry table. | ||||
| CaccessListVLANTableIndex | 1.3.6.1.4.1.738.1.6.1.1.4.1.1.1 | INTEGER (1..65535) | NA | |
column · INTEGER (1..65535) · not-accessible · current This object identifies the order in which the access group was applied on this VLAN. | ||||
| CaccessListVLANGroupIndex | 1.3.6.1.4.1.738.1.6.1.1.4.1.1.2 | INTEGER (1..65535) | NA | |
column · INTEGER (1..65535) · not-accessible · current This indicates the index of the access group for this VLAN. This value is the same as the value of accessListControlListGroup for the assigned ACL. | ||||
| CaccessListVLANDscp | 1.3.6.1.4.1.738.1.6.1.1.4.1.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Enable Diffserv codepoint.
| ||||
| CaccessListVLANRowStatus | 1.3.6.1.4.1.738.1.6.1.1.4.1.1.4 | RowStatus | RW | |
column · RowStatus · read-write · current This indicates the row status & enables creation & delettion of rows in this and related tables. See SNMPv2-TC for more information. | ||||
| CaccessListVLANPriority | 1.3.6.1.4.1.738.1.6.1.1.4.1.1.5 | INTEGER (0..8) | RW | |
column · INTEGER (0..8) · read-write · current Priority level value. Valid values are 0 to 7, 8 means undefined. | ||||
| CaccessListVLANDiscard | 1.3.6.1.4.1.738.1.6.1.1.4.1.1.6 | AccessListDiscard | RW | |
column · AccessListDiscard · read-write · current Mark discardable or normal for priority on access group Only the E-Series family and the G-Series family boards support the values green, yellow and red. Other values are not supported by the E-Series and G-series. | ||||
| CaccessListVLANRateLimit | 1.3.6.1.4.1.738.1.6.1.1.4.1.1.7 | Rate | RW | |
column · Rate · read-write · current The maximum rate in kBps(kilobytes per second). | ||||
| CaccessListVLANExceedAction | 1.3.6.1.4.1.738.1.6.1.1.4.1.1.8 | ExceedAction | RW | |
column · ExceedAction · read-write · current The action to perform when the condition is true. | ||||
| CaccessListVLANBurst | 1.3.6.1.4.1.738.1.6.1.1.4.1.1.9 | Rate | RW | |
column · Rate · read-write · current The maximum Burst rate in kBps(kilobytes per second). This object is supported only by E-Series and G-series. | ||||
| CaccessListVLANRedirectIfIndex | 1.3.6.1.4.1.738.1.6.1.1.4.1.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current This object controls redirection of traffic matching this ACG. If the value is a valid ifIndex, the traffic will be redirected to it. If the value is 0 redirection is disabled. Setting this object requires that accessListInterfaceRedirectVlanID is also set. | ||||
| CaccessListVLANRedirectVlanID | 1.3.6.1.4.1.738.1.6.1.1.4.1.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current his object controls redirection of traffic matching this ACG. If the value is a valid VLAN ID, the traffic will be redirected to it. If the value is 0 redirection is disabled. If the device is TMetro, this object sets the tag substitution policy for this access group | ||||
| CaccessListVLANRedirectNexthop | 1.3.6.1.4.1.738.1.6.1.1.4.1.1.12 | IpAddress | RW | |
column · IpAddress · read-write · current This object controls redirection of traffic matching this ACG. If the value is a valid IP address then the traffic will be redirected to it. If the value is 0 redirection is disabled. | ||||
| CaccessListVLANPeakRate | 1.3.6.1.4.1.738.1.6.1.1.4.1.1.13 | Rate | RW | |
column · Rate · read-write · current Peak Information Rate in kBps(kilobytes per second). | ||||
| CaccessListVLANPeakBurst | 1.3.6.1.4.1.738.1.6.1.1.4.1.1.14 | Rate | RW | |
column · Rate · read-write · current Peak Burst Size in kBps(kilobytes per second). | ||||
| CaccessListVLANColorAware | 1.3.6.1.4.1.738.1.6.1.1.4.1.1.15 | INTEGER | RW | |
column · INTEGER · read-write · current Toggle Color aware traffic metering.Disabled by default.
| ||||
| CaccessListVLANPolicy | 1.3.6.1.4.1.738.1.6.1.1.4.1.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current Set remarking policy.
| ||||
| CaccessListVLANTrafficClass | 1.3.6.1.4.1.738.1.6.1.1.4.1.1.17 | INTEGER (0..256) | RW | |
column · INTEGER (0..256) · read-write · current Diff Serv CP - Type of Service In E-Series and G-series the range is 0..63. A value of 256 means that Traffic Class is not set. | ||||
| CaccessListVLANSpanRootTrack | 1.3.6.1.4.1.738.1.6.1.1.4.1.1.18 | INTEGER | RC | |
column · INTEGER · read-create · current The span root track option for VLAN redirects.
| ||||
| CaccessListVLANUntagFilter | 1.3.6.1.4.1.738.1.6.1.1.4.1.1.19 | INTEGER | RC | |
column · INTEGER · read-create · current The filter for tagged or untagged backets to be applied
| ||||
| CaccessListVLANApplyMirror | 1.3.6.1.4.1.738.1.6.1.1.4.1.1.20 | TruthValue | RC | |
column · TruthValue · read-create · current This object shows that the traffic on the interface will be mirrored. | ||||
| CaccessListVLANStatistics | 1.3.6.1.4.1.738.1.6.1.1.4.1.1.21 | AccessListStatistics | RC | |
column · AccessListStatistics · read-create · current This object enables statistics on the interface. | ||||
| CaccessListVLANDirection | 1.3.6.1.4.1.738.1.6.1.1.4.1.1.22 | AccessListDirection | RC | |
column · AccessListDirection · read-create · current This object determines the ingress-egress type of applied ACL. | ||||
| NaccessListsServices | 1.3.6.1.4.1.738.1.6.1.1.5 | |||
| TaccessListSapTable | 1.3.6.1.4.1.738.1.6.1.1.5.1 | NA | ||
table · not-accessible · current This table controls the assigment of access groups to a SAP. | ||||
| RaccessListSapEntry | 1.3.6.1.4.1.738.1.6.1.1.5.1.1 | NA | ||
row · not-accessible · current An entry in the AccessListSapEntry table. | ||||
| CaccessListSapTableIndex | 1.3.6.1.4.1.738.1.6.1.1.5.1.1.1 | INTEGER (1..65535) | NA | |
column · INTEGER (1..65535) · not-accessible · current This object identifies the row number for this (ifIndex) interface. | ||||
| CaccessListSapGroupIndex | 1.3.6.1.4.1.738.1.6.1.1.5.1.1.2 | INTEGER (1..65535) | NA | |
column · INTEGER (1..65535) · not-accessible · current This indicates the index of the access group for this interface. This value is the same as the value of accessListControlListGroup for the assigned ACL. | ||||
| CaccessListSapRowStatus | 1.3.6.1.4.1.738.1.6.1.1.5.1.1.3 | RowStatus | RW | |
column · RowStatus · read-write · current This indicates the row status & enables creation & deletion of lines in this (and related) tables. See SNMPv2-TC for more information. | ||||
| CaccessListSapRateLimit | 1.3.6.1.4.1.738.1.6.1.1.5.1.1.4 | Rate | RW | |
column · Rate · read-write · current The maximum rate in kBps(kilobytes per second) | ||||
| CaccessListSapExceedAction | 1.3.6.1.4.1.738.1.6.1.1.5.1.1.5 | ExceedAction | RW | |
column · ExceedAction · read-write · current The action to perform when the condition is true. | ||||
| CaccessListSapBurst | 1.3.6.1.4.1.738.1.6.1.1.5.1.1.6 | Rate | RW | |
column · Rate · read-write · current The maximum Burst rate in kBps(kilobytes per second). This object is supported only by E-Series and G-series. | ||||
| CaccessListSapPeakRate | 1.3.6.1.4.1.738.1.6.1.1.5.1.1.7 | Rate | RW | |
column · Rate · read-write · current Peak Information Rate in kBps(kilobytes per second). | ||||
| CaccessListSapPeakBurst | 1.3.6.1.4.1.738.1.6.1.1.5.1.1.8 | Rate | RW | |
column · Rate · read-write · current Peak Burst Size in kBps(kilobytes per second). | ||||
| CaccessListSapColorAware | 1.3.6.1.4.1.738.1.6.1.1.5.1.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current Toggle Color aware traffic metering. Disabled by default.
| ||||
| CaccessListSapTxq | 1.3.6.1.4.1.738.1.6.1.1.5.1.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current This object performs QoS and remarking of traffic matching an ACG | ||||
| CaccessListSapTxqDropLevel | 1.3.6.1.4.1.738.1.6.1.1.5.1.1.11 | TxqDropLevel | RC | |
column · TxqDropLevel · read-create · current This object shows the drop-level (green/yellow) and is related to accessListInterfaceTxq. | ||||
| CaccessListSapStatistics | 1.3.6.1.4.1.738.1.6.1.1.5.1.1.12 | AccessListStatistics | RC | |
column · AccessListStatistics · read-create · current This object enables statistics on the SAP. | ||||
| CaccessListSapRateStatistics | 1.3.6.1.4.1.738.1.6.1.1.5.1.1.13 | AccessListStatistics | RC | |
column · AccessListStatistics · read-create · current This object enables rate statistics on the SAP. | ||||
| CaccessListSapDirection | 1.3.6.1.4.1.738.1.6.1.1.5.1.1.14 | AccessListDirection | RC | |
column · AccessListDirection · read-create · current This object determines the ingress-egress type of applied ACL. | ||||
| NaccessListsInterfaceStatistics | 1.3.6.1.4.1.738.1.6.1.1.6 | |||
| TaccessListInterfaceStatisticsTable | 1.3.6.1.4.1.738.1.6.1.1.6.1 | NA | ||
table · not-accessible · current This table serves the interface statistics. | ||||
| RaccessListInterfaceStatisticsEntry | 1.3.6.1.4.1.738.1.6.1.1.6.1.1 | NA | ||
row · not-accessible · current An entry in the accessListInterfaceStatisticsTable table. | ||||
| CaccessListInterfaceStatisticsGroupIndex | 1.3.6.1.4.1.738.1.6.1.1.6.1.1.1 | INTEGER (1..65535) | NA | |
column · INTEGER (1..65535) · not-accessible · current This indicates the index of the access group for this interface. This value is the same as the value of accessListControlListGroup for the assigned ACL. | ||||
| CaccessListInterfaceGreenBytes | 1.3.6.1.4.1.738.1.6.1.1.6.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current This object shows green traffic in bytes for access group with enabled rate-limit statistics. | ||||
| CaccessListInterfaceYellowBytes | 1.3.6.1.4.1.738.1.6.1.1.6.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This object shows yellow traffic in bytes for access group with enabled rate-limit statistics. | ||||
| CaccessListInterfaceRedBytes | 1.3.6.1.4.1.738.1.6.1.1.6.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current This object shows red traffic in bytes for access group with enabled rate-limit statistics. | ||||
| CaccessListInterfaceClassifiedPackets | 1.3.6.1.4.1.738.1.6.1.1.6.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current This object shows match classified packets in bytes for access group with enabled statistics. | ||||
| NaccessListsServicesStatistics | 1.3.6.1.4.1.738.1.6.1.1.7 | |||
| TaccessListSapStatisticsTable | 1.3.6.1.4.1.738.1.6.1.1.7.1 | NA | ||
table · not-accessible · current This table serves the Sap statistics. | ||||
| RaccessListSapStatisticsEntry | 1.3.6.1.4.1.738.1.6.1.1.7.1.1 | NA | ||
row · not-accessible · current An entry in the accessListSapStatisticsTable table. | ||||
| CaccessListSapStatisticsGroupIndex | 1.3.6.1.4.1.738.1.6.1.1.7.1.1.1 | INTEGER (1..65535) | NA | |
column · INTEGER (1..65535) · not-accessible · current This indicates the index of the access group for this Sap. This value is the same as the value of accessListControlListGroup for the assigned ACL. | ||||
| CaccessListSapGreenBytes | 1.3.6.1.4.1.738.1.6.1.1.7.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current This object shows green traffic in bytes for access group with enabled rate-limit statistics. | ||||
| CaccessListSapYellowBytes | 1.3.6.1.4.1.738.1.6.1.1.7.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This object shows yellow traffic in bytes for access group with enabled rate-limit statistics. | ||||
| CaccessListSapRedBytes | 1.3.6.1.4.1.738.1.6.1.1.7.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current This object shows red traffic in bytes for access group with enabled rate-limit statistics. | ||||
| CaccessListSapClassifiedPackets | 1.3.6.1.4.1.738.1.6.1.1.7.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current This object shows classified packets in bytes for access group with enabled match statistics. | ||||
| Nisp | 1.3.6.1.4.1.738.1.6.1.2 | |||
| TispUpLinkTable | 1.3.6.1.4.1.738.1.6.1.2.1 | NA | ||
table · not-accessible · current This table controls the ISP up-links. This table is supported only by B-Series. | ||||
| RispUpLinkEntry | 1.3.6.1.4.1.738.1.6.1.2.1.1 | NA | ||
| CispUpLinkIndex | 1.3.6.1.4.1.738.1.6.1.2.1.1.1 | INTEGER (1..32) | NA | |
column · INTEGER (1..32) · not-accessible · current The ISP index. | ||||
| CispUpLinkIfIndex | 1.3.6.1.4.1.738.1.6.1.2.1.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current The ifIndex (from RFC1213) that this ISP belongs to. | ||||
| CispUpLinkType | 1.3.6.1.4.1.738.1.6.1.2.1.1.3 | ISPType | RC | |
column · ISPType · read-create · current The ispUpLinkType object shows if the ISP is connective or normal. | ||||
| CispUpLinkAccessGroup | 1.3.6.1.4.1.738.1.6.1.2.1.1.4 | INTEGER (1..199) | RW | |
column · INTEGER (1..199) · read-write · current A valid index (accessListControlListGroup) from accessListControlTable. For the ISP up-link the index groups are 100..199. | ||||
| CispUpLinkVLANid | 1.3.6.1.4.1.738.1.6.1.2.1.1.5 | INTEGER (0..4000) | RC | |
column · INTEGER (0..4000) · read-create · current The VID for this link. 0 means no VID. | ||||
| CispUpLinkVLANtag | 1.3.6.1.4.1.738.1.6.1.2.1.1.6 | VlanTag | RC | |
column · VlanTag · read-create · current Type of the VLAN - tagged or untagged. | ||||
| CispUpLinkRowStatus | 1.3.6.1.4.1.738.1.6.1.2.1.1.7 | RowStatus | RW | |
column · RowStatus · read-write · current This indicates the row status and enables creation & deletion of rows in this and related tables. See SNMPv2-TC for more information. | ||||
| TispUserInterfaceTable | 1.3.6.1.4.1.738.1.6.1.2.2 | NA | ||
table · not-accessible · current This table controls the assignment of ISP users to an interface. This table is supported only by B-Series. | ||||
| RispUserInterfaceEntry | 1.3.6.1.4.1.738.1.6.1.2.2.1 | NA | ||
| CispUserInterfaceAssigen | 1.3.6.1.4.1.738.1.6.1.2.2.1.1 | AssigenValue | RW | |
column · AssigenValue · read-write · current Indicates if an ISP user is assigned to this interface. | ||||
| CispUserInterfaceIspUplinkIndex | 1.3.6.1.4.1.738.1.6.1.2.2.1.2 | INTEGER (1..32) | RC | |
column · INTEGER (1..32) · read-create · current A valid index from ispUpLinkTable. | ||||
| CispUserInterfaceRateLimit | 1.3.6.1.4.1.738.1.6.1.2.2.1.3 | Rate | RW | |
column · Rate · read-write · current The maximum rate. | ||||
| CispUserInterfaceConformAction | 1.3.6.1.4.1.738.1.6.1.2.2.1.4 | ConformAction | RW | |
column · ConformAction · read-write · current The action to perform when the condition is true. | ||||
| CispUserInterfaceExceedAction | 1.3.6.1.4.1.738.1.6.1.2.2.1.5 | ExceedAction | RW | |
column · ExceedAction · read-write · current The action to perform when the condition is true. | ||||
| CispUserInterfaceShaper | 1.3.6.1.4.1.738.1.6.1.2.2.1.6 | Shaper | RW | |
column · Shaper · read-write · current This object controls the status of the shaper. | ||||
| NprvtSwitchAccessListConformance | 1.3.6.1.4.1.738.1.6.1.3 | |||
| NprvtSwitchAccessListMibGroups | 1.3.6.1.4.1.738.1.6.1.3.1 | |||
| GprvtSwitchAccessListNotificationGroup | 1.3.6.1.4.1.738.1.6.1.3.1.1 | |||
group · current Private Notification Group. | ||||
Textual conventions
AccessListActionINTEGERdeny(1)permit(0)remark(3)shaper(2)undefined(100)The AccessListAction type represents action taken when this access-list condition are asserted.
AccessListDirectionINTEGERegress(1)ingress(0)Access list applied direction values
AccessListDiscardINTEGERdiscardable(1)green(2)normal(0)red(4)undefined(5)yellow(3)Mark discardable or normal for priority on access group Only the E-Series family and the G-Series family boards support the values green, yellow and red. Other values are not supported by the E-Series and G-series.
AccessListEstablishedINTEGERdisable(0)enable(1)Match established connection (ACK or RST flages)
AccessListModifyTosINTEGERdisable(0)enable(1)The AccessListModifyTos must be enabled if the user wants the ToS to be modified.
AccessListRemarkStringOCTET STRING (SIZE (0..40))Display hint:
40aAccess list entry comment string
AccessListStatisticsINTEGERdisable(0)enable(1)Access list statistics values
AssigenValueINTEGERdisable(2)enable(1)Enables/disables assignment of an ISP user to this interface.
ConformActionINTEGERtransmit(0)The action to perform if the condition is matched.
ExceedActionINTEGERdrop(0)green(3)markDiscardable(1)red(5)undefined(2)yellow(4)the ExceedAction type represents the action that the switch should take when one of the limits exceeded: drop -> drop the packets, markDiscardable this packet is discardable if a conjection ocure Only the E-Series family boards support the values green, yellow and red. Other values are not supported by the E-Series
ISPTypeINTEGERconnectivity(0)normal(1)routed(2)The ISPType type represents the ISP type - either connective or normal.
IpProtocolINTEGER (0..255)The IpProtocol type represents the protocol number in the IP datagram header
MatchTrafficINTEGERbroadcast(4)known-unicast(5)multicast(3)undefined(0)unknown-unicast(2)untagged(1)Match traffic values
PortDefINTEGERequal(1)greater-than(3)less-than(4)range(2)undefined(0)The PortDef type operates together with the port number filed inside the access-list & control how the port number is being processed. The values greater-than(3) and less-than(4) are supported only on E-Series family boards
RateINTEGER (0 | 13..1000000)The Rate type represents in Kbps the maximum rate limit for the flow
ShaperINTEGERdisable(0)enable(1)The Shaper type represents the status of the shaper
TxqDropLevelINTEGERgreen(1)undefined(0)yellow(2)TXQ drop level values
VlanTagINTEGERtagged(1)undefined(2)untagged(0)The VlanTag type represents if the VLAN is tagged or untagged.
Traps / Notifications
- etherTypeAccessListRuleMatched
1.3.6.1.4.1.738.1.6.1.0.4 - extendedAccessListRuleMatched
1.3.6.1.4.1.738.1.6.1.0.2 - macAccessListRuleMatched
1.3.6.1.4.1.738.1.6.1.0.3 - standardAccessListRuleMatched
1.3.6.1.4.1.738.1.6.1.0.1