PRVT-SAA-MIB
B.A.T.M. Advance TechnologiesThis MIB provides the extended capability of controlling and provisioning various OAM tests and SAA monitoring. It adds extra functionality for DISMAN-PING-MIB
snmptranslate -m PRVT-SAA-MIB -Tpsnmpwalk -v2c -c <community> -m PRVT-SAA-MIB <host> 1.3.6.1.4.1.738.1.5.130Imports
| PRVT-SWITCH-MIB | switch |
|---|---|
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IprvtSaaMib | 1.3.6.1.4.1.738.1.5.130 | |||
identity This MIB provides the extended capability of controlling and provisioning various OAM tests and SAA monitoring. It adds extra functionality for DISMAN-PING-MIB | ||||
| NprvtSaaNotifications | 1.3.6.1.4.1.738.1.5.130.0 | |||
| !prvtSaaRFC2544ProbeFailed | 1.3.6.1.4.1.738.1.5.130.0.1 | |||
notification · current This trap should be sent whenever a SAA probe on a specific test fails. | ||||
| !prvtSaaRFC2544ProbeSuccess | 1.3.6.1.4.1.738.1.5.130.0.2 | |||
notification · current This trap should be sent whenever a SAA probe on a specific test finishes with success. | ||||
| !prvtSaaRFC2544TestFinished | 1.3.6.1.4.1.738.1.5.130.0.3 | |||
notification · current This trap should be sent whenever a SAA RFC2544 test is finished | ||||
| !prvtSaaY1731DelayNEThreshold | 1.3.6.1.4.1.738.1.5.130.0.4 | |||
notification · current This trap should be sent whenever the near end delay on a SAA Y1731 test will surpass one of the 2 defined thresholds. | ||||
| !prvtSaaY1731DelayFEThreshold | 1.3.6.1.4.1.738.1.5.130.0.5 | |||
notification · current This trap should be sent whenever the far end delay on a SAA Y1731 test will surpass one of the 2 defined thresholds. | ||||
| !prvtSaaY1731JitterNEThreshold | 1.3.6.1.4.1.738.1.5.130.0.6 | |||
notification · current This trap should be sent whenever the near end jitter on a SAA Y1731 test will surpass one of the 2 defined thresholds. | ||||
| !prvtSaaY1731JitterFEThreshold | 1.3.6.1.4.1.738.1.5.130.0.7 | |||
notification · current This trap should be sent whenever the far end jitter on a SAA Y1731 test will surpass one of the 2 defined thresholds. | ||||
| !prvtSaaY1731FrLossNEThreshold | 1.3.6.1.4.1.738.1.5.130.0.8 | |||
notification · current This trap should be sent whenever the near end frameloss on a SAA Y1731 test will surpass one of the 2 defined thresholds. | ||||
| !prvtSaaY1731FrLossFEThreshold | 1.3.6.1.4.1.738.1.5.130.0.9 | |||
notification · current This trap should be sent whenever the far end frameloss on a SAA Y1731 test will surpass one of the 2 defined thresholds. | ||||
| NprvtSaaObjects | 1.3.6.1.4.1.738.1.5.130.1 | |||
| NprvtSaaTest | 1.3.6.1.4.1.738.1.5.130.1.1 | |||
| TprvtSaaY1731PmTestTable | 1.3.6.1.4.1.738.1.5.130.1.1.1 | NA | ||
table · not-accessible · current This table holds the configuration for a SAA Y1731 test | ||||
| RprvtSaaY1731PmTestEntry | 1.3.6.1.4.1.738.1.5.130.1.1.1.1 | NA | ||
| CprvtSaaY1731PmTestOwner | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.1 | SnmpAdminString (SIZE (0..32)) | NA | |
column · SnmpAdminString (SIZE (0..32)) · not-accessible · current This string is used to describe the owner of the Y1731 Pm SAA test. | ||||
| CprvtSaaY1731PmTestName | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.2 | SnmpAdminString (SIZE (0..32)) | NA | |
column · SnmpAdminString (SIZE (0..32)) · not-accessible · current This string is used to describe the test name for the Y1731 Pm SAA test. It is also used as a test identifier. | ||||
| CprvtSaaY1731PmTestType | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current SAA Y1731 Pm test type.
| ||||
| CprvtSaaY1731PmTestExecStatus | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current SAA Y1731 Pm test execution status.
| ||||
| CprvtSaaY1731PmTestEncapType | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current SAA Y1731 Pm test encapsulation type. It can be either test over VLAN or test over Service. The value 1 is the default value representing that neither type is set.
| ||||
| CprvtSaaY1731PmTestEncapValue | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.6 | Unsigned32 (1..4294967295) | RW | |
column · Unsigned32 (1..4294967295) · read-write · current The value of the defined SAA Y1731 Pm test encapsulation. It should be either the Vlan ID or the Service ID, depending on the type set in prvtSaaY1731PmTestEncapType. | ||||
| CprvtSaaY1731PmTestUserPort | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.7 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current For SAA Y1731 Pm test, this leaf is used only in case the encapsulation is VLAN type and it determines the port on which the user is connected. | ||||
| CprvtSaaY1731PmTestUplinkPort | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.8 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current For SAA Y1731 Pm test, this leaf is used only in case the encapsulation is VLAN type and it determines the port that the SAA test devices are connected through. | ||||
| CprvtSaaY1731PmTestTargetMac | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.9 | DisplayString (SIZE (17)) | RW | |
column · DisplayString (SIZE (17)) · read-write · current The target MAC address for the SAA Y1731 test. | ||||
| CprvtSaaY1731PmTestCfmDomainLevel | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.10 | Unsigned32 (0..7) | RW | |
column · Unsigned32 (0..7) · read-write · current CFM Domain level on which the test will be run. | ||||
| CprvtSaaY1731PmTestRemoteCfmMep | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.11 | Unsigned32 (0..8191) | RW | |
column · Unsigned32 (0..8191) · read-write · current The remote MEP associated with target MAC. | ||||
| CprvtSaaY1731PmTestProfile | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.12 | Unsigned32 (0 | 1..2147483647) | RW | |
column · Unsigned32 (0 | 1..2147483647) · read-write · current The profile ID associated to the SAA Y1731 Pm test. A value of 0 depicts no set profile. | ||||
| CprvtSaaY1731PmTestHistoryDepth | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.13 | Unsigned32 (1..120) | RW | |
column · Unsigned32 (1..120) · read-write · current Probe history count. | ||||
| CprvtSaaY1731PmTestPeriod | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.14 | Unsigned32 (100..10000) | RW | |
column · Unsigned32 (100..10000) · read-write · current The period the SAA Y1731 Pm test will run, in milliseconds. | ||||
| CprvtSaaY1731PmTestTimeout | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.15 | Unsigned32 (1..60) | RW | |
column · Unsigned32 (1..60) · read-write · current The timeout period for a test packet. | ||||
| CprvtSaaY1731PmTestMonitorInterval | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.16 | Unsigned32 (1..60) | RW | |
column · Unsigned32 (1..60) · read-write · current Monitoring interval is relevant only for continous Y1731 test. It is measured in minutes. | ||||
| CprvtSaaY1731PmTestFrequency | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.17 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current The time between two consecutive intervals. A value of 1 defines a delay of a second between the end of the first and the begining of the next interval. | ||||
| CprvtSaaY1731PmTestClocksInSync | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.18 | TruthValue | RW | |
column · TruthValue · read-write · current This variable tells if the clocks of the test are syncronized. | ||||
| CprvtSaaY1731PmTestDelayMethod | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.19 | INTEGER | RW | |
column · INTEGER · read-write · current Defines the method of calculating delay on a Y1731 test.
| ||||
| CprvtSaaY1731PmTestDelayPvalue | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.20 | Unsigned32 (1..100) | RW | |
column · Unsigned32 (1..100) · read-write · current Percent used to calculate delay in p-percentile method.
Reported delay is the percent-th member in the array with sorted delays.
Relevant only for p-percentile method.
Value in range of 1-100 is for percentile delay method of calculation.
Value 101 describes that average delay method of calculation is used.
Only values inside the 1..100 range can be set to this parameter. | ||||
| CprvtSaaY1731PmTestJitterMethod | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.21 | INTEGER | RW | |
column · INTEGER · read-write · current Defines the method of calculating jitter on a Y1731 test.
| ||||
| CprvtSaaY1731PmTestJitterPvalue | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.22 | Unsigned32 (1..100) | RW | |
column · Unsigned32 (1..100) · read-write · current Percent used to calculate jitter in p-percentile method.
Reported jitter is the percent-th member in the array with sorted jitters.
Relevant only for p-percentile method.
Value in range of 1..100 is for percentile jitter method of calculation.
Value 101 describes that peakToPeak jitter method of calculation is used.
Value 102 describes that variance jitter method of calculation is used.
Only values inside the 1..100 range can be set to this parameter. | ||||
| CprvtSaaY1731PmTestPriority | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.23 | Unsigned32 (0..7) | RW | |
column · Unsigned32 (0..7) · read-write · current Defines the priority of the packets sent by the SAA Y1731 Pm test (priority to count user traffic). | ||||
| CprvtSaaY1731PmTestRowStatus | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.24 | RowStatus | RC | |
column · RowStatus · read-create · current The status of the row. The writable columns in a row can not be changed if the row is active. Certain columns must have a valid value before a row can be activated. | ||||
| CprvtSaaY1731PmTestCCMAPSCount | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.25 | TruthValue | RW | |
column · TruthValue · read-write · current Determines whether to include proactive OAM frames for ETH-CC and ETH-APS in loss measurement counters or not. | ||||
| CprvtSaaY1731PmTestLossMeasurementType | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.26 | INTEGER | RW | |
column · INTEGER · read-write · current If set to 1 Synthetic Loss Measurement will be used for frame-loss calculations.If set 0 user packets will be used for frame-loss calculations
| ||||
| CprvtSaaY1731PmTestSLMTransmit | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.27 | TruthValue | RW | |
column · TruthValue · read-write · current If set true the device is capable of sending SLM packets and frame-loss calculations. This must be used only when loss measurement type is SLM | ||||
| CprvtSaaY1731PmTestTestId | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.28 | Unsigned32 (0..4095) | RW | |
column · Unsigned32 (0..4095) · read-write · current Specify the unique test id used in Y1731 SLM. 0 means not set.It is mandatory for the Y1731 SLM test | ||||
| CprvtSaaY1731PmTestDropEligible | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.29 | TruthValue | RW | |
column · TruthValue · read-write · current Drop Eligible flag for S-VLAN used for the Y1731 SLM test. | ||||
| CprvtSaaY1731PmTestDataSize | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.30 | Unsigned32 (64..1518) | RW | |
column · Unsigned32 (64..1518) · read-write · current Packet sizes for Y1731 SLM test | ||||
| CprvtSaaY1731PmTestCountAllPriorities | 1.3.6.1.4.1.738.1.5.130.1.1.1.1.31 | TruthValue | RW | |
column · TruthValue · read-write · current Measure for all priorities. | ||||
| TprvtSaaRFC2544ThroughputTestTable | 1.3.6.1.4.1.738.1.5.130.1.1.2 | NA | ||
table · not-accessible · current This table holds the configuration for a SAA RFC2544 test | ||||
| RprvtSaaRFC2544ThroughputTestEntry | 1.3.6.1.4.1.738.1.5.130.1.1.2.1 | NA | ||
row · not-accessible · current NONE | ||||
| CprvtSaaRFC2544ThroughputTestOwner | 1.3.6.1.4.1.738.1.5.130.1.1.2.1.1 | SnmpAdminString (SIZE (0..32)) | NA | |
column · SnmpAdminString (SIZE (0..32)) · not-accessible · current This string is used to describe the owner of the RFC2544 SAA test. | ||||
| CprvtSaaRFC2544ThroughputTestName | 1.3.6.1.4.1.738.1.5.130.1.1.2.1.2 | SnmpAdminString (SIZE (0..32)) | NA | |
column · SnmpAdminString (SIZE (0..32)) · not-accessible · current This string is used to describe the test name for the RFC2544 SAA test. It is also used as a test identifier. | ||||
| CprvtSaaRFC2544ThroughputTestType | 1.3.6.1.4.1.738.1.5.130.1.1.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current SAA RFC2544 Throughput test type
| ||||
| CprvtSaaRFC2544ThroughputTestExecStatus | 1.3.6.1.4.1.738.1.5.130.1.1.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current SAA RFC2544 Throughput test execution status.
| ||||
| CprvtSaaRFC2544ThroughputTestSourceType | 1.3.6.1.4.1.738.1.5.130.1.1.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current SAA RFC2544 Throughput test source type.
| ||||
| CprvtSaaRFC2544ThroughputTestSource | 1.3.6.1.4.1.738.1.5.130.1.1.2.1.6 | OCTET STRING (SIZE (1..17)) | RC | |
column · OCTET STRING (SIZE (1..17)) · read-create · current String that holds either the MAC or the MEP ID. MAC should be in the format AA:BB:CC:DD:EE:FF MEP shold be in the format DOMAIN:MA:MEP that represent the values corresponding to dot1agCfmMdIndex, dot1agCfmMaIndex and dot1agCfmMepIdentifier from IEEE8021-CFM-MIB. e.g.: MAC: 00:A0:12:5C:12:C0 MEP: 1:1:2 | ||||
| CprvtSaaRFC2544ThroughputTestTargetType | 1.3.6.1.4.1.738.1.5.130.1.1.2.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current SAA RFC2544 Throughput test target type.
| ||||
| CprvtSaaRFC2544ThroughputTestTarget | 1.3.6.1.4.1.738.1.5.130.1.1.2.1.8 | OCTET STRING (SIZE (1..17)) | RC | |
column · OCTET STRING (SIZE (1..17)) · read-create · current String that holds either the MAC or the MEP ID. MAC should be in the format AA:BB:CC:DD:EE:FF MEP shold be in the format DOMAIN:MA:MEP that represent the values corresponding to dot1agCfmMdIndex, dot1agCfmMaIndex and dot1agCfmMepIdentifier from IEEE8021-CFM-MIB. e.g.: MAC: 00:A0:12:5C:12:C0 MEP: 1:1:2 | ||||
| CprvtSaaRFC2544ThroughputTestTimeout | 1.3.6.1.4.1.738.1.5.130.1.1.2.1.9 | Unsigned32 (0..100) | RW | |
column · Unsigned32 (0..100) · read-write · current SAA RFC2544 Throughput test timeout, in 0.1 of a second increments | ||||
| CprvtSaaRFC2544ThroughputTestCIR | 1.3.6.1.4.1.738.1.5.130.1.1.2.1.10 | Unsigned32 (64..1000000) | RW | |
column · Unsigned32 (64..1000000) · read-write · current SAA RFC2544 Throughput Committed Information Rate (CIR) value. | ||||
| CprvtSaaRFC2544ThroughputTestCBS | 1.3.6.1.4.1.738.1.5.130.1.1.2.1.11 | Unsigned32 (10..2048) | RW | |
column · Unsigned32 (10..2048) · read-write · current SAA RFC2544 Throughput Committed Burst Size (CBS) value. | ||||
| CprvtSaaRFC2544ThroughputTestBurstPercentage | 1.3.6.1.4.1.738.1.5.130.1.1.2.1.12 | Unsigned32 (0..100) | RW | |
column · Unsigned32 (0..100) · read-write · current Part of CIR to use for bursts(CBS). | ||||
| CprvtSaaRFC2544ThroughputTestDuration | 1.3.6.1.4.1.738.1.5.130.1.1.2.1.13 | Unsigned32 (1..180) | RW | |
column · Unsigned32 (1..180) · read-write · current The SAA RFC2544 Throughput test duration, in seconds. | ||||
| CprvtSaaRFC2544ThroughputTestMaxFrameloss | 1.3.6.1.4.1.738.1.5.130.1.1.2.1.14 | Unsigned32 (0..100000) | RW | |
column · Unsigned32 (0..100000) · read-write · current The maximum frameloss to declare a successful SAA RFC2544 Throughput test in 0.001 of a percent. | ||||
| CprvtSaaRFC2544ThroughputTestCVLAN0 | 1.3.6.1.4.1.738.1.5.130.1.1.2.1.15 | Unsigned32 (0..4094) | RW | |
column · Unsigned32 (0..4094) · read-write · current C-VLAN ID for the SAA RFC2544 Throughput test. | ||||
| CprvtSaaRFC2544ThroughputTestCVLAN0Priority | 1.3.6.1.4.1.738.1.5.130.1.1.2.1.16 | Unsigned32 (0..7) | RW | |
column · Unsigned32 (0..7) · read-write · current VPT for C-VLAN0 for the SAA RFC2544 Throughput test. | ||||
| CprvtSaaRFC2544ThroughputTestCVLAN0DropEligible | 1.3.6.1.4.1.738.1.5.130.1.1.2.1.17 | TruthValue | RW | |
column · TruthValue · read-write · current Drop Eligible flag for C-VLAN0 for the SAA RFC2544 Throughput test. | ||||
| CprvtSaaRFC2544ThroughputTestSVLAN | 1.3.6.1.4.1.738.1.5.130.1.1.2.1.18 | Unsigned32 (0..4094) | RO | |
column · Unsigned32 (0..4094) · read-only · current S-VLAN ID for the SAA RFC2544 Throughput test. | ||||
| CprvtSaaRFC2544ThroughputTestSVLANPriority | 1.3.6.1.4.1.738.1.5.130.1.1.2.1.19 | Unsigned32 (0..7) | RW | |
column · Unsigned32 (0..7) · read-write · current VPT for S-VLAN0 for the SAA RFC2544 Throughput test. | ||||
| CprvtSaaRFC2544ThroughputTestSVLANDropEligible | 1.3.6.1.4.1.738.1.5.130.1.1.2.1.20 | TruthValue | RW | |
column · TruthValue · read-write · current Drop Eligible flag for S-VLAN0 for the SAA RFC2544 Throughput test. | ||||
| CprvtSaaRFC2544ThroughputTestPDUSize | 1.3.6.1.4.1.738.1.5.130.1.1.2.1.21 | DisplayString (SIZE (3)) | RW | |
column · DisplayString (SIZE (3)) · read-write · current Bitmask with predefined packet sizes for SAA RFC2544 Throughput test: 64,128,256,512,1024,1280,1518,1530,2000,9000 (LSB set=64...10th bit set =9000) | ||||
| CprvtSaaRFC2544ThroughputTestACKTimeout | 1.3.6.1.4.1.738.1.5.130.1.1.2.1.22 | Unsigned32 (1..60) | RW | |
column · Unsigned32 (1..60) · read-write · current Defines the timeout for a SAA RFC2544 Throughput test tail to send an ACK MCC. | ||||
| CprvtSaaRFC2544ThroughputTestLoopbackType | 1.3.6.1.4.1.738.1.5.130.1.1.2.1.23 | INTEGER | RW | |
column · INTEGER · read-write · current SAA RFC2544 Throughput test loopback type.
| ||||
| CprvtSaaRFC2544ThroughputTestPaternType | 1.3.6.1.4.1.738.1.5.130.1.1.2.1.24 | INTEGER | RW | |
column · INTEGER · read-write · current SAA RFC2544 Throughput test patern type. Options for it are none, null, null-crc, prbs, prbs-crc.
| ||||
| CprvtSaaRFC2544ThroughputTestRowStatus | 1.3.6.1.4.1.738.1.5.130.1.1.2.1.25 | RowStatus | RC | |
column · RowStatus · read-create · current The status of the row entry. The writable columns in a row can not be changed if the row is active. Certain columns must have a valid value before a row can be activated. | ||||
| CprvtSaaRFC2544ThroughputTestEthertype | 1.3.6.1.4.1.738.1.5.130.1.1.2.1.26 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current SAA RFC2544 Throughput test Ethertype. | ||||
| TprvtSaaY1731LoopbackTestTable | 1.3.6.1.4.1.738.1.5.130.1.1.3 | NA | ||
table · not-accessible · current This table holds the configuration for a SAA Y1731 Loopback test. It describes the FPGA configuration. | ||||
| RprvtSaaY1731LoopbackTestEntry | 1.3.6.1.4.1.738.1.5.130.1.1.3.1 | NA | ||
row · not-accessible · current NONE | ||||
| CprvtSaaY1731LoopbackTestEncapType | 1.3.6.1.4.1.738.1.5.130.1.1.3.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current SAA Y1731 Loopback test encapsulation type. It can be either test over VLAN or test over Service. The value 1 is the default value representing that neither type is set.
| ||||
| CprvtSaaY1731LoopbackTestEncapValue | 1.3.6.1.4.1.738.1.5.130.1.1.3.1.2 | Unsigned32 (0..10000) | NA | |
column · Unsigned32 (0..10000) · not-accessible · current The value of the defined SAA Y1731 Lopback test encapsulation. It should be either the Vlan ID or the Service ID, depending on the type set in prvtSaaY1731LoopbackTestEncapType. | ||||
| CprvtSaaY1731LoopbackTestUserPort | 1.3.6.1.4.1.738.1.5.130.1.1.3.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current For SAA Y1731 Loopback test, this leaf is used only in case the encapsulation is VLAN type and it determines the port on which the user is connected. | ||||
| CprvtSaaY1731LoopbackTestUplinkPort | 1.3.6.1.4.1.738.1.5.130.1.1.3.1.4 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current For SAA Y1731 Loopback test, this leaf is used only in case the encapsulation is VLAN type and it determines the port that the SAA test devices are connected through. | ||||
| CprvtSaaY1731LoopbackTestType | 1.3.6.1.4.1.738.1.5.130.1.1.3.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current SAA Y1731 Loopback test type. Specifies the test being perfoer
| ||||
| CprvtSaaY1731LoopbackTestRowStatus | 1.3.6.1.4.1.738.1.5.130.1.1.3.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current The status of the row entry. The writable columns in a row can not be changed if the row is active. Certain columns must have a valid value before a row can be activated. | ||||
| CprvtSaaY1731LoopbackTestCCMAPSCount | 1.3.6.1.4.1.738.1.5.130.1.1.3.1.7 | TruthValue | RW | |
column · TruthValue · read-write · current Determines whether to include proactive OAM frames for ETH-CC and ETH-APS in loss measurement counters or not. | ||||
| CprvtSaaY1731LoopbackTestCountAllPriorities | 1.3.6.1.4.1.738.1.5.130.1.1.3.1.8 | TruthValue | RW | |
column · TruthValue · read-write · current Determines whether to count all packets ignoring the priority. | ||||
| NprvtSaaTestResult | 1.3.6.1.4.1.738.1.5.130.1.2 | |||
| TprvtSaaY1731TestResultTable | 1.3.6.1.4.1.738.1.5.130.1.2.1 | NA | ||
table · not-accessible · current This table contains SAA results for Y1731 tests. | ||||
| RprvtSaaY1731TestResultEntry | 1.3.6.1.4.1.738.1.5.130.1.2.1.1 | NA | ||
row · not-accessible · current NONE | ||||
| CprvtSaaY1731TestResultIndex | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current SAA Y1731 test results table index | ||||
| CprvtSaaY1731TestResultDelayNE | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Near end delay result in 0.01 of a microsecond | ||||
| CprvtSaaY1731TestResultDelayFE | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Far end delay result in 0.01 of a microsecond | ||||
| CprvtSaaY1731TestResultJitterNE | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Near end jitter result in 0.01 of a microsecond | ||||
| CprvtSaaY1731TestResultJitterFE | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Far end jitter result in 0.01 of a microsecond | ||||
| CprvtSaaY1731TestResultFrameLossNE | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Near end frame-loss result in 0.0000001 of a percent | ||||
| CprvtSaaY1731TestResultFrameLossFE | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Far end frame-loss result in 0.0000001 of a percent | ||||
| CprvtSaaY1731TestResultFramesSentNE | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current Near end sent frames | ||||
| CprvtSaaY1731TestResultFramesSentFE | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current Far end sent frames | ||||
| CprvtSaaY1731TestResultFramesRcvdNE | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current Near end received frames | ||||
| CprvtSaaY1731TestResultFramesRcvdFE | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current Far end received frames | ||||
| CprvtSaaY1731TestResultPacketsSent | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The test packets sent between devices | ||||
| CprvtSaaY1731TestResultNoTimeouts | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.13 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Number of timeouts for the SAA Y1731 Pm test | ||||
| CprvtSaaY1731TestResultNoErrors | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.14 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Number of errors for the SAA Y1731 Pm test | ||||
| CprvtSaaY1731TestResultCompletionTime | 1.3.6.1.4.1.738.1.5.130.1.2.1.1.15 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Completion time in seconds for the SAA Y1731 PM test. | ||||
| TprvtSaaRFC2544TestResultTable | 1.3.6.1.4.1.738.1.5.130.1.2.2 | NA | ||
table · not-accessible · current This table contains SAA results for RFC2544 tests. | ||||
| RprvtSaaRFC2544TestResultEntry | 1.3.6.1.4.1.738.1.5.130.1.2.2.1 | NA | ||
row · not-accessible · current NONE | ||||
| CprvtSaaRFC2544TestResultIndex | 1.3.6.1.4.1.738.1.5.130.1.2.2.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current SAA RFC2544 Throughput test results table index. Index will take values 1 to 9, each value representing a frame size from this list: 64,128,256,512,1024,1280,1518,2000,9000. The leaf prvtSaaRFC2544TestResultFrameSize will present this value in a more user-friendly way. | ||||
| CprvtSaaRFC2544TestResultFrameSize | 1.3.6.1.4.1.738.1.5.130.1.2.2.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Frame size of the SAA RFC2544 test. Possible values are: 64,128,256,512,1024,1280,1518,2000,9000 | ||||
| CprvtSaaRFC2544TestResultFrameLoss | 1.3.6.1.4.1.738.1.5.130.1.2.2.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Frame loss of the SAA RFC2544 test measured in 0.001 of a percent | ||||
| CprvtSaaRFC2544TestResultThroughput | 1.3.6.1.4.1.738.1.5.130.1.2.2.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Throughput of the SAA RFC2544 test measured in Kbps | ||||
| CprvtSaaRFC2544TestResultNetThroughput | 1.3.6.1.4.1.738.1.5.130.1.2.2.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The actual throughput of the SAA RFC2544 test containing only user data. It is measured in Kbps. | ||||
| CprvtSaaRFC2544TestResultStatus | 1.3.6.1.4.1.738.1.5.130.1.2.2.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Status of the SAA RFC2544 test
| ||||
| CprvtSaaRFC2544TestResultDelayMinimum | 1.3.6.1.4.1.738.1.5.130.1.2.2.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Minimum delay for SAA RFC2544 test measured in 1/100th of a microsecond. | ||||
| CprvtSaaRFC2544TestResultDelayAverage | 1.3.6.1.4.1.738.1.5.130.1.2.2.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Average delay for SAA RFC2544 test measured in 1/100th of a microsecond. | ||||
| CprvtSaaRFC2544TestResultDelayMaximum | 1.3.6.1.4.1.738.1.5.130.1.2.2.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Maximum delay for SAA RFC2544 test measured in 1/100th of a microsecond. | ||||
| NprvtSaaProfiles | 1.3.6.1.4.1.738.1.5.130.1.3 | |||
| TprvtSaaProfileTable | 1.3.6.1.4.1.738.1.5.130.1.3.1 | NA | ||
table · not-accessible · current Table contains SAA thresholds. | ||||
| RprvtSaaProfileEntry | 1.3.6.1.4.1.738.1.5.130.1.3.1.1 | NA | ||
| CprvtSaaProfileIndex | 1.3.6.1.4.1.738.1.5.130.1.3.1.1.1 | Unsigned32 (1..2147483647) | NA | |
column · Unsigned32 (1..2147483647) · not-accessible · current SAA profile table index. | ||||
| CprvtSaaProfileDelayNE | 1.3.6.1.4.1.738.1.5.130.1.3.1.1.2 | Unsigned32 (1..60000000) | RW | |
column · Unsigned32 (1..60000000) · read-write · current Near end delay in microseconds | ||||
| CprvtSaaProfileDelayFE | 1.3.6.1.4.1.738.1.5.130.1.3.1.1.3 | Unsigned32 (1..60000000) | RW | |
column · Unsigned32 (1..60000000) · read-write · current Far end delay in microseconds | ||||
| CprvtSaaProfileJitterNE | 1.3.6.1.4.1.738.1.5.130.1.3.1.1.4 | Unsigned32 (1..60000000) | RW | |
column · Unsigned32 (1..60000000) · read-write · current Near end jitter in microseconds | ||||
| CprvtSaaProfileJitterFE | 1.3.6.1.4.1.738.1.5.130.1.3.1.1.5 | Unsigned32 (1..60000000) | RW | |
column · Unsigned32 (1..60000000) · read-write · current Far end jitter in microseconds | ||||
| CprvtSaaProfileFrameLossNE | 1.3.6.1.4.1.738.1.5.130.1.3.1.1.6 | Unsigned32 (0..100000) | RW | |
column · Unsigned32 (0..100000) · read-write · current Near end frame-loss measured in 0.001 of percent | ||||
| CprvtSaaProfileFrameLossFE | 1.3.6.1.4.1.738.1.5.130.1.3.1.1.7 | Unsigned32 (0..100000) | RW | |
column · Unsigned32 (0..100000) · read-write · current Far end frame-loss measured in 0.001 of percent | ||||
| CprvtSaaProfileRowStatus | 1.3.6.1.4.1.738.1.5.130.1.3.1.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current Creation/delete/edit of the SAA profile. | ||||
| CprvtSaaProfileName | 1.3.6.1.4.1.738.1.5.130.1.3.1.1.9 | OCTET STRING (SIZE (0..32)) | RC | |
column · OCTET STRING (SIZE (0..32)) · read-create · current Name assigned to the SAA profile. | ||||
| NprvtTwampObjects | 1.3.6.1.4.1.738.1.5.130.1.4 | |||
| NprvtTwampTest | 1.3.6.1.4.1.738.1.5.130.1.4.1 | |||
| TprvtTwampTestTable | 1.3.6.1.4.1.738.1.5.130.1.4.1.1 | NA | ||
table · not-accessible · current Table contains TWAMP tests. | ||||
| RprvtTwampTestEntry | 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1 | NA | ||
| CprvtTwampTestName | 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.1 | PrvtTwampTestNameType | NA | |
column · PrvtTwampTestNameType · not-accessible · current TWAMP test name. | ||||
| CprvtTwampTestRowStatus | 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current Create/delete entry in prvtTwampTestTable. | ||||
| CprvtTwampTestServer | 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current TWAMP test server ip-address. | ||||
| CprvtTwampTestSessionsCount | 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.4 | Integer32 (1..10) | RC | |
column · Integer32 (1..10) · read-create · current The number of parallel test sessions. | ||||
| CprvtTwampTestPackets | 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.5 | Integer32 (10..1000) | RC | |
column · Integer32 (10..1000) · read-create · current The number of packets in parallel sessions. | ||||
| CprvtTwampTestTimeout | 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.6 | Integer32 (100..10000) | RC | |
column · Integer32 (100..10000) · read-create · current The timout interval of test packets (in milliseconds). | ||||
| CprvtTwampTestDelay | 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.7 | Integer32 (100..1500) | RC | |
column · Integer32 (100..1500) · read-create · current The delay interval between test packets (in milliseconds) | ||||
| CprvtTwampTestExecuteNow | 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.8 | Integer32 (0..2) | RC | |
column · Integer32 (0..2) · read-create · current When this object is set to '1', command self-test execute-now. When this object is set to '2' the self-test is stopped. Setting the variable to '0' results in an 'inconsistentValue' error. Setting it to any other value has no effect. When this object is read, the value '0' is returned. | ||||
| NprvtTwampServer | 1.3.6.1.4.1.738.1.5.130.1.4.2 | |||
| SprvtTwampServerInnactivity | 1.3.6.1.4.1.738.1.5.130.1.4.2.1 | Integer32 (1..900) | RW | |
scalar · Integer32 (1..900) · read-write · current The server innactivity timeout interval of the TWAMP server (in seconds). | ||||
| SprvtTwampServerSessionInnactivity | 1.3.6.1.4.1.738.1.5.130.1.4.2.2 | Integer32 (1..900) | RW | |
scalar · Integer32 (1..900) · read-write · current The session innactivity timeout interval of the TWAMP server (in seconds). | ||||
| SprvtTwampServerMaxSessions | 1.3.6.1.4.1.738.1.5.130.1.4.2.3 | Integer32 (1..1000) | RW | |
scalar · Integer32 (1..1000) · read-write · current The maximum number of controll sessions supported by the TWAMP server. | ||||
| SprvtTwampServerMaxParallelSessions | 1.3.6.1.4.1.738.1.5.130.1.4.2.4 | Integer32 (1..10) | RW | |
scalar · Integer32 (1..10) · read-write · current The maximum number of parallel test sessions for each client supperted by the TWAMP server. | ||||
| SprvtTwampServerShutdown | 1.3.6.1.4.1.738.1.5.130.1.4.2.5 | TruthValue | RW | |
scalar · TruthValue · read-write · current The administrative state of the TWAMP server. | ||||
| TprvtTwampClientTable | 1.3.6.1.4.1.738.1.5.130.1.4.2.6 | NA | ||
table · not-accessible · current Table contains the allowed clients for the TWAMP server. | ||||
| RprvtTwampClientEntry | 1.3.6.1.4.1.738.1.5.130.1.4.2.6.1 | NA | ||
| CprvtTwampClientIp | 1.3.6.1.4.1.738.1.5.130.1.4.2.6.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The ip-address of the client. | ||||
| CprvtTwampClientRowStatus | 1.3.6.1.4.1.738.1.5.130.1.4.2.6.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current create/delete entry in prvtTwampClientTable | ||||
| SprvtTwampServerControlSessions | 1.3.6.1.4.1.738.1.5.130.1.4.2.7 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of current control sessions established on the TWAMP server. | ||||
| SprvtTwampServerTestSessions | 1.3.6.1.4.1.738.1.5.130.1.4.2.8 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of current test sessions established on the TWAMP server. | ||||
| NprvtTwampTestResult | 1.3.6.1.4.1.738.1.5.130.1.4.3 | |||
| TprvtTwampTestResultTable | 1.3.6.1.4.1.738.1.5.130.1.4.3.1 | NA | ||
table · not-accessible · current Table contains statistics of the executed TWAMP tests. | ||||
| RprvtTwampTestResultEntry | 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1 | NA | ||
| CprvtTwampTestId | 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The internal ID of the TWAMP test instance. | ||||
| CprvtTwampTestResultName | 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.2 | PrvtTwampTestNameType | RO | |
column · PrvtTwampTestNameType · read-only · current TWAMP test name. | ||||
| CprvtTwampTestStartTime | 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The start time of the TWAMP test instance. | ||||
| CprvtTwampTestServerAddress | 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The server ip-address of the TWAMP test instance. | ||||
| CprvtTwampTestSessions | 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of parallel test sessions of the TWAMP test instance. | ||||
| CprvtTwampTestState | 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The status of the executed TWAMP test instance.
| ||||
| CprvtTwampTestRtt | 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current The average round-trip time of the TWAMP test sample. | ||||
| CprvtTwampTestMinRtt | 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current The minimum round-trip time of the TWAMP test sample. | ||||
| CprvtTwampTestMaxRtt | 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current The maximum round-trip time of the TWAMP test sample. | ||||
| CprvtTwampTestPcktSent | 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.10 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of test packets sent for the TWAMP test instance. | ||||
| CprvtTwampTestPcktLost | 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of lost test packets. | ||||
| CprvtTwampTestPcktDrop | 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of dropped test packets. | ||||
| CprvtTwampTestVariation | 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current The maximum module variation of the TWAMP test sample | ||||
| CprvtTwampTestVariationLow | 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.14 | PrvtTwampDecimalPercent | RO | |
column · PrvtTwampDecimalPercent · read-only · current The percent of singletons whose variation is less than 10% of the negated maximum module variation of the sample. | ||||
| CprvtTwampTestVariationMiddle | 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.15 | PrvtTwampDecimalPercent | RO | |
column · PrvtTwampDecimalPercent · read-only · current The percent of singletons whose variation by module is less than 10% of the maximum module variation of the sample. | ||||
| CprvtTwampTestVariationHigh | 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.16 | PrvtTwampDecimalPercent | RO | |
column · PrvtTwampDecimalPercent · read-only · current The percent of singletons whose variation is greater than 10% of the maximum module variation of the sample. | ||||
| NprvtSaaConformance | 1.3.6.1.4.1.738.1.5.130.2 | |||
| NprvtSaaCompliances | 1.3.6.1.4.1.738.1.5.130.2.1 | |||
| MprvtSaaCompliance | 1.3.6.1.4.1.738.1.5.130.2.1.1 | |||
compliance · current The compliance statement for support of the SAA MIB module. | ||||
| NprvtSaaGroups | 1.3.6.1.4.1.738.1.5.130.2.2 | |||
| GprvtSaaY1731TestGroup | 1.3.6.1.4.1.738.1.5.130.2.2.1 | |||
group · current Objects for the SAA Y1731 test group.
| ||||
| GprvtSaaRFC2544TestGroup | 1.3.6.1.4.1.738.1.5.130.2.2.2 | |||
group · current Objects for the SAA RFC2544 test group.
| ||||
| GprvtSaaY1731TestResultsGroup | 1.3.6.1.4.1.738.1.5.130.2.2.3 | |||
group · current Objects for the SAA Y1731 test results group.
| ||||
| GprvtSaaRFC2544TestResultsGroup | 1.3.6.1.4.1.738.1.5.130.2.2.4 | |||
group · current Objects for the SAA RFC2544 test results group. | ||||
| GprvtSaaProfilesGroup | 1.3.6.1.4.1.738.1.5.130.2.2.5 | |||
group · current Objects for the SAA profiles group. | ||||
| GprvtSaaNotificationsGroup | 1.3.6.1.4.1.738.1.5.130.2.2.6 | |||
group · current Objects for the Notifications group. | ||||
| GprvtSaaY1731LoopbackTestGroup | 1.3.6.1.4.1.738.1.5.130.2.2.7 | |||
group · current Objects for the SAA Y1731 Loopback test group. | ||||
Textual conventions
PrvtTwampDecimalPercentOCTET STRING (SIZE (1..10))Display hint:
3d.2dA percentage value in decimal format.
PrvtTwampTestNameTypeOCTET STRING (SIZE (1..32))Display hint:
32aTWAMP test name type (1..32 characters).
Traps / Notifications
- prvtSaaRFC2544ProbeFailed
1.3.6.1.4.1.738.1.5.130.0.1 - prvtSaaRFC2544ProbeSuccess
1.3.6.1.4.1.738.1.5.130.0.2 - prvtSaaRFC2544TestFinished
1.3.6.1.4.1.738.1.5.130.0.3 - prvtSaaY1731DelayFEThreshold
1.3.6.1.4.1.738.1.5.130.0.5 - prvtSaaY1731DelayNEThreshold
1.3.6.1.4.1.738.1.5.130.0.4 - prvtSaaY1731FrLossFEThreshold
1.3.6.1.4.1.738.1.5.130.0.9 - prvtSaaY1731FrLossNEThreshold
1.3.6.1.4.1.738.1.5.130.0.8 - prvtSaaY1731JitterFEThreshold
1.3.6.1.4.1.738.1.5.130.0.7 - prvtSaaY1731JitterNEThreshold
1.3.6.1.4.1.738.1.5.130.0.6