PRVT-RING-EPS-MIB
B.A.T.M. Advance TechnologiesThis private MIB provides capability of controlling the automatic Ring Ethernet Protection Switching (ITU-T G.8032)
snmptranslate -m PRVT-RING-EPS-MIB -Tpsnmpwalk -v2c -c <community> -m PRVT-RING-EPS-MIB <host> 1.3.6.1.4.1.738.1.5.134Imports
| IEEE8021-CFM-MIB | Dot1agCfmMDLevelOrNone, Dot1agCfmMepIdOrZero |
|---|---|
| IF-MIB | InterfaceIndexOrZero |
| PRVT-SWITCH-MIB | switch |
| Q-BRIDGE-MIB | VlanIdOrNone |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IprvtRingEpsMib | 1.3.6.1.4.1.738.1.5.134 | |||
identity This private MIB provides capability of controlling the automatic Ring Ethernet Protection Switching (ITU-T G.8032) | ||||
| NprvtRingEpsNotifications | 1.3.6.1.4.1.738.1.5.134.0 | |||
| !prvtRingEpsDefectAlarm | 1.3.6.1.4.1.738.1.5.134.0.1 | |||
notification · current This trap will be sent by any instance when it notices a defect. So far only the situation when two or more RPL-owners are defined in the ring is identified as a defect. This scenario is noticed when the instance with the RPL-Owner role receives a RAPS packet with the RB bit set in its status field from a different NodeID than its own. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the instance reporting the change by the indices in the OID of the prvtRingEpsDefectFop variable in the notification. | ||||
| !prvtRingEpsSwitchoverAlarm | 1.3.6.1.4.1.738.1.5.134.0.2 | |||
notification · current This trap will be sent by any instance when it changes state. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the instance reporting the change by the indices in the OID of the prvtRingEpsState variable in the notification.
| ||||
| !prvtRingEpsSubRingDefectAlarm | 1.3.6.1.4.1.738.1.5.134.0.3 | |||
notification · current This trap will be sent by any subring instance when it notices a defect. So far only the situation when two or more RPL-owners are defined in the ring is identified as a defect. This scenario is noticed when the instance with the RPL-Owner role receives a RAPS packet with the RB bit set in its status field from a different NodeID than its own. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the instance reporting the change by the indices in the OID of the prvtRingEpsDefectFop variable in the notification. | ||||
| !prvtRingEpsSubRingSwitchoverAlarm | 1.3.6.1.4.1.738.1.5.134.0.4 | |||
notification · current This trap will be sent by any subring instance when it changes state. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the instance reporting the change by the indices in the OID of the prvtRingEpsSubRingState variable in the notification.
| ||||
| NprvtRingEpsObjects | 1.3.6.1.4.1.738.1.5.134.1 | |||
| NprvtRingEpsInstances | 1.3.6.1.4.1.738.1.5.134.1.1 | |||
| TprvtRingEpsInstanceTable | 1.3.6.1.4.1.738.1.5.134.1.1.1 | NA | ||
table · not-accessible · current This table includes information about the ring instances defined on this node. | ||||
| RprvtRingEpsInstanceEntry | 1.3.6.1.4.1.738.1.5.134.1.1.1.1 | NA | ||
| CprvtRingEpsInstanceIndex | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.1 | Unsigned32 (1..10) | NA | |
column · Unsigned32 (1..10) · not-accessible · current RAPS instance index | ||||
| CprvtRingEpsMode | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.2 | PrvtRingEpsModeType | RC | |
column · PrvtRingEpsModeType · read-create · current Version of the protocol the instance will use | ||||
| CprvtRingEpsNodeRole | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.3 | PrvtRingEpsNodeRoleType | RC | |
column · PrvtRingEpsNodeRoleType · read-create · current This variable identifies the role that the node will play inside the ring. The node can have two special roles, RPL owner or RPL neighbor, when one of its ports is designated as RPL. The ring can have a single RPL owner and a single RPL neighbor, connected between eachother via the RPL. If neither of the node ports are designated as RPL, then the node should have the role of a Simple node | ||||
| CprvtRingEpsState | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.4 | PrvtRingEpsStateType | RO | |
column · PrvtRingEpsStateType · read-only · current This variable identifies the state of the ring node according to the standard state machine. | ||||
| CprvtRingEpsLocalCommand | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.5 | PrvtRingEpsLocalCommandType | RC | |
column · PrvtRingEpsLocalCommandType · read-create · current The user can control the ring using a set of commands allowing blocking and unblocking of ports. These commands are rapsLcManualSwitch, rapsLcForcedSwitch and rapsLcClear. The others are either read-only values or not yet defined by the standard. | ||||
| CprvtRingEpsControlVlan | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.6 | VlanIdOrNone | RC | |
column · VlanIdOrNone · read-create · current The vlan ID used for RAPS & CFM traffic. | ||||
| CprvtRingEpsPort0Ifindex | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.7 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current This variable is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, attached to the ring as port 0. | ||||
| CprvtRingEpsPort1Ifindex | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.8 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current This variable is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, attached to the ring as port 1. | ||||
| CprvtRingEpsRplPort | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.9 | PrvtRingEpsRplPortType | RC | |
column · PrvtRingEpsRplPortType · read-create · current This object controls whether the one of the ring ports is designated as RPL for the ring or not. | ||||
| CprvtRingEpsManualSwitchPort | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.10 | PrvtRingEpsRplPortType | RC | |
column · PrvtRingEpsRplPortType · read-create · current The port blocked by the Manual Switch command | ||||
| CprvtRingEpsCfmMdLevel | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.11 | Dot1agCfmMDLevelOrNone | RC | |
column · Dot1agCfmMDLevelOrNone · read-create · current Value of the CFM MD level where the protected domain is situated | ||||
| CprvtRingEpsPort0Mep | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.12 | Dot1agCfmMepIdOrZero | RC | |
column · Dot1agCfmMepIdOrZero · read-create · current This variable is the peer MEP ID that should send CCMs towards port 0. | ||||
| CprvtRingEpsPort1Mep | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.13 | Dot1agCfmMepIdOrZero | RC | |
column · Dot1agCfmMepIdOrZero · read-create · current This variable is the peer MEP ID that should send CCMs towards port 1. | ||||
| CprvtRingEpsRevertive | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.14 | TruthValue | RC | |
column · TruthValue · read-create · current This is the MI_RAPS_Revertive variable defined in the standard. It controls whether the RPL is blocked again after a failure of some ring link recovers. | ||||
| CprvtRingEpsNoVirtualChannel | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.15 | TruthValue | RC | |
column · TruthValue · read-create · current Node is part of a subring that doesn't use RAPS virtual channel | ||||
| CprvtRingEpsHoldOffTimer | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.16 | Unsigned32 (0..10000) | RC | |
column · Unsigned32 (0..10000) · read-create · current Range is from 0 to 10 seconds in 100msec intervals | ||||
| CprvtRingEpsWaitToRestoreTimer | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.17 | Unsigned32 (1..12) | RC | |
column · Unsigned32 (1..12) · read-create · current Range is from 1 to 12 minutes | ||||
| CprvtRingEpsGuardTimer | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.18 | Unsigned32 (10..2000) | RC | |
column · Unsigned32 (10..2000) · read-create · current Range is from 10msec to 2 seconds in 10msec intervals | ||||
| CprvtRingEpsWaitToBlockTimer | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.19 | Unsigned32 (5010..7000) | RO | |
column · Unsigned32 (5010..7000) · read-only · current Range is from 5010msec to 7 seconds in 10msec intervals. This time is actulally the Guard Timer + 5 seconds | ||||
| CprvtRingEpsDefectFop | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.20 | PrvtRingEpsDefectType | RO | |
column · PrvtRingEpsDefectType · read-only · current So far only the situation when two or more RPL-owners are defined in the ring is identified as a defect. This scenario is noticed when the instance with the RPL-Owner role receives a RAPS packet with the RB bit set in its status field from a different NodeID than its own. | ||||
| CprvtRingEpsPort0Status | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.21 | PrvtRingEpsPortStatusType | RO | |
column · PrvtRingEpsPortStatusType · read-only · current This variable reflects the state of port 0. It can be either Ok (unblocked), Blocked or Failed. | ||||
| CprvtRingEpsPort1Status | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.22 | PrvtRingEpsPortStatusType | RO | |
column · PrvtRingEpsPortStatusType · read-only · current This variable reflects the state of port 1. It can be either Ok (unblocked), Blocked or Failed. | ||||
| CprvtRingEpsPort0PeerNodeId | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.23 | MacAddress | RO | |
column · MacAddress · read-only · current This variable reflects the Node ID from the RAPS packet received via port 0. | ||||
| CprvtRingEpsPort1PeerNodeId | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.24 | MacAddress | RO | |
column · MacAddress · read-only · current This variable reflects the Node ID from the RAPS packet received via port 1. | ||||
| CprvtRingEpsPort0PeerCommand | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.25 | PrvtRingEpsRemoteRequestType | RO | |
column · PrvtRingEpsRemoteRequestType · read-only · current This variable reflects the Request/State of the RAPS packet received via port 0. | ||||
| CprvtRingEpsPort1PeerCommand | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.26 | PrvtRingEpsRemoteRequestType | RO | |
column · PrvtRingEpsRemoteRequestType · read-only · current This variable reflects the Request/State of the RAPS packet received via port 1. | ||||
| CprvtRingEpsPort0PeerStatus | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.27 | PrvtRingEpsPeerStatusType | RO | |
column · PrvtRingEpsPeerStatusType · read-only · current This variable reflects the status field of the RAPS packet received via port 0. | ||||
| CprvtRingEpsPort1PeerStatus | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.28 | PrvtRingEpsPeerStatusType | RO | |
column · PrvtRingEpsPeerStatusType · read-only · current This variable reflects the status field of the RAPS packet received via port 1. | ||||
| CprvtRingEpsOperationalStatus | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.29 | TruthValue | RO | |
column · TruthValue · read-only · current The purpose of this status is to identify to the user whether this instance is ready for running. The operational status can be up or down. When creating the instance the operational status will be down. Receiving CCMs from the expected peer MEPs on both ring ports will bring the operational status to up. If any needed CFM configuration is removed the operational status will go back to down | ||||
| CprvtRingEpsAdminStatus | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.30 | TruthValue | RC | |
column · TruthValue · read-create · current Administrative status of the instance | ||||
| CprvtRingEpsRowStatus | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.31 | RowStatus | RC | |
column · RowStatus · read-create · current The status of the row. | ||||
| CprvtRingEpsForcedSwitchPort | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.32 | PrvtRingEpsRplPortType | RC | |
column · PrvtRingEpsRplPortType · read-create · current The port blocked by the Forced Switch command | ||||
| CprvtRingEpsInstanceDescription | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.33 | DisplayString | RC | |
column · DisplayString · read-create · current RAPS instance description. | ||||
| CprvtRingEpsRingId | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.34 | Unsigned32 (1..255) | RC | |
column · Unsigned32 (1..255) · read-create · current The last octet of the RAPS destination MAC address is designated as Ring ID (01-19-A7-00-00-[Ring ID]). As of G.8032v2 the destination MAC address '01-19-A7-00-00-01' is used. The usage of other MAC addresses is for further study. | ||||
| CprvtRingEpsPort0MonitoringMethod | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.35 | INTEGER | RW | |
column · INTEGER · read-write · current Raps monitoring methods for port 0: ccm - CCM messages and link status will be used for raps monitoring, link-status -Link status will be used for raps monitoring
| ||||
| CprvtRingEpsPort1MonitoringMethod | 1.3.6.1.4.1.738.1.5.134.1.1.1.1.36 | INTEGER | RW | |
column · INTEGER · read-write · current Raps monitoring methods for port 1: ccm - CCM messages and link status will be used for raps monitoring, link-status - Link status will be used for raps monitoring
| ||||
| NprvtRingEpsVlans | 1.3.6.1.4.1.738.1.5.134.1.2 | |||
| TprvtRingEpsVlanTable | 1.3.6.1.4.1.738.1.5.134.1.2.1 | NA | ||
table · not-accessible · current This table includes information about protected vlans and the ring instances that monitor them. | ||||
| RprvtRingEpsVlanEntry | 1.3.6.1.4.1.738.1.5.134.1.2.1.1 | NA | ||
row · not-accessible · current Connection between vlan IDs and the RAPS instance that monitors them
| ||||
| CprvtRingEpsVlanIndex | 1.3.6.1.4.1.738.1.5.134.1.2.1.1.1 | Unsigned32 (1..4094) | NA | |
column · Unsigned32 (1..4094) · not-accessible · current The vlan ID. | ||||
| CprvtRingEpsInstance | 1.3.6.1.4.1.738.1.5.134.1.2.1.1.2 | Unsigned32 (0..10) | RC | |
column · Unsigned32 (0..10) · read-create · current RAPS instance that will monitor this vlan | ||||
| CprvtRingEpsVlanRowStatus | 1.3.6.1.4.1.738.1.5.134.1.2.1.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current The status of the row. | ||||
| NprvtRingEpsSubRings | 1.3.6.1.4.1.738.1.5.134.1.3 | |||
| TprvtRingEpsSubRingTable | 1.3.6.1.4.1.738.1.5.134.1.3.1 | NA | ||
table · not-accessible · current Table containing information about the subring instances defined on this node. | ||||
| RprvtRingEpsSubRingEntry | 1.3.6.1.4.1.738.1.5.134.1.3.1.1 | NA | ||
row · not-accessible · current Configuration of a subring that is interconnected to the main ring in an interconnection node | ||||
| CprvtRingEpsSubRingIndex | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.1 | Unsigned32 (1..10) | NA | |
column · Unsigned32 (1..10) · not-accessible · current A subring ID | ||||
| CprvtRingEpsSubRingNodeRole | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.2 | PrvtRingEpsNodeRoleType | RC | |
column · PrvtRingEpsNodeRoleType · read-create · current This variable identifies the role that the node will play inside the subring. The node can have two special roles, RPL owner or RPL neighbor, when the subring port is designated as RPL. The subring can have a single RPL owner and a single RPL neighbor, connected between eachother via the RPL. If the subring port is not designated as RPL, then the node should have the role of a Simple node | ||||
| CprvtRingEpsSubRingState | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.3 | PrvtRingEpsStateType | RO | |
column · PrvtRingEpsStateType · read-only · current This variable identifies the state of the subring node according to the standard state machine. | ||||
| CprvtRingEpsSubRingLocalCommand | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.4 | PrvtRingEpsLocalCommandType | RC | |
column · PrvtRingEpsLocalCommandType · read-create · current The user can control the ring using a set of commands allowing blocking and unblocking of ports. These commands are rapsLcManualSwitch, rapsLcForcedSwitch and rapsLcClear. The others are either read-only values or not yet defined by the standard. | ||||
| CprvtRingEpsSubRingPortIfindex | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.5 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current This variable is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, attached to the subring. | ||||
| CprvtRingEpsSubRingPortMep | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.6 | Dot1agCfmMepIdOrZero | RC | |
column · Dot1agCfmMepIdOrZero · read-create · current This variable is the peer MEP ID that should send CCMs towards the subring port. | ||||
| CprvtRingEpsSubRingRplPort | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.7 | PrvtRingEpsRplPortType | RC | |
column · PrvtRingEpsRplPortType · read-create · current This object controls whether the subring port is designated as RPL for the subring or not. | ||||
| CprvtRingEpsSubRingVirtualChannelVlan | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.8 | VlanIdOrNone | RC | |
column · VlanIdOrNone · read-create · current The vlan ID used for Virtual Channel encapsulation | ||||
| CprvtRingEpsSubRingRevertive | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.9 | TruthValue | RC | |
column · TruthValue · read-create · current This is the MI_RAPS_Revertive variable defined in the standard. It controls whether the RPL is blocked again after a failure of some subring link recovers. | ||||
| CprvtRingEpsSubRingHoldOffTimer | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.10 | Unsigned32 (0..10000) | RC | |
column · Unsigned32 (0..10000) · read-create · current Range is from 0 to 10 seconds in 100msec intervals | ||||
| CprvtRingEpsSubRingWaitToRestoreTimer | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.11 | Unsigned32 (1..12) | RC | |
column · Unsigned32 (1..12) · read-create · current Range is from 1 to 12 minutes | ||||
| CprvtRingEpsSubRingGuardTimer | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.12 | Unsigned32 (10..2000) | RC | |
column · Unsigned32 (10..2000) · read-create · current Range is from 10msec to 2 seconds in 10msec intervals | ||||
| CprvtRingEpsSubRingWaitToBlockTimer | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.13 | Unsigned32 (5010..7000) | RO | |
column · Unsigned32 (5010..7000) · read-only · current Range is from 5010msec to 7 seconds in 10msec intervals. This time is actulally the Guard Timer + 5 seconds | ||||
| CprvtRingEpsSubRingDefectFop | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.14 | PrvtRingEpsDefectType | RO | |
column · PrvtRingEpsDefectType · read-only · current So far only the situation when two or more RPL-owners are defined in the ring is identified as a defect. This scenario is noticed when the instance with the RPL-Owner role receives a RAPS packet with the RB bit set in its status field from a different NodeID than its own. | ||||
| CprvtRingEpsSubRingPortStatus | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.15 | PrvtRingEpsPortStatusType | RO | |
column · PrvtRingEpsPortStatusType · read-only · current This variable reflects the state of the subring port. It can be either Ok (unblocked), Blocked or Failed. | ||||
| CprvtRingEpsSubRingPortPeerNodeId | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.16 | MacAddress | RO | |
column · MacAddress · read-only · current This variable reflects the Node ID from the RAPS packet received via the subring port. | ||||
| CprvtRingEpsSubRingPeerCommand | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.17 | PrvtRingEpsRemoteRequestType | RO | |
column · PrvtRingEpsRemoteRequestType · read-only · current This variable reflects the Request/State of the RAPS packet received via the subring port. | ||||
| CprvtRingEpsSubRingPeerStatus | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.18 | PrvtRingEpsPeerStatusType | RO | |
column · PrvtRingEpsPeerStatusType · read-only · current This variable reflects the status field of the RAPS packet received via the subring port. | ||||
| CprvtRingEpsSubRingVcPeerNodeId | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.19 | MacAddress | RO | |
column · MacAddress · read-only · current This variable reflects the Node ID from the RAPS packet received via the virtual channel. | ||||
| CprvtRingEpsSubRingVcPeerCommand | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.20 | PrvtRingEpsRemoteRequestType | RO | |
column · PrvtRingEpsRemoteRequestType · read-only · current This variable reflects the Request/State of the RAPS packet received via the virtual channel. | ||||
| CprvtRingEpsSubRingVcPeerStatus | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.21 | PrvtRingEpsPeerStatusType | RO | |
column · PrvtRingEpsPeerStatusType · read-only · current This variable reflects the status field of the RAPS packet received via the virtual channel. | ||||
| CprvtRingEpsSubRingPropagateTC | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.22 | TruthValue | RC | |
column · TruthValue · read-create · current This is the MI_RAPS_Propagate_TC variable mentioned in the standard. If this is enabled a flush in the subring will be followed by a flush in the main instance. | ||||
| CprvtRingEpsSubRingOperationalStatus | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.23 | TruthValue | RO | |
column · TruthValue · read-only · current The purpose of this status is to identify to the user whether this instance is ready for running. The operational status can be up or down. When creating the instance the operational status will be down. Receiving CCMs from the expected peer MEP on the subring port will bring the operational status to up. If any needed CFM configuration is removed the operational status will go back to down | ||||
| CprvtRingEpsSubRingAdminStatus | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.24 | TruthValue | RC | |
column · TruthValue · read-create · current Administrative status of the subring instance | ||||
| CprvtRingEpsSubRingRowStatus | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.25 | RowStatus | RC | |
column · RowStatus · read-create · current The status of the row. | ||||
| CprvtRingEpsSubRingControlVlan | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.26 | VlanIdOrNone | RC | |
column · VlanIdOrNone · read-create · current The vlan ID used for RAPS & CFM traffic. | ||||
| CprvtRingEpsSubRingDescription | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.27 | DisplayString | RC | |
column · DisplayString · read-create · current RAPS instance sub-ring description. | ||||
| CprvtRingEpsSubRingRingId | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.28 | Unsigned32 (1..255) | RC | |
column · Unsigned32 (1..255) · read-create · current The last octet of the RAPS destination MAC address is designated as Ring ID (01-19-A7-00-00-[Ring ID]). As of G.8032v2 the destination MAC address '01-19-A7-00-00-01' is used. The usage of other MAC addresses is for further study. | ||||
| CprvtRingEpsSubRingMonitoringMethod | 1.3.6.1.4.1.738.1.5.134.1.3.1.1.29 | INTEGER | RW | |
column · INTEGER · read-write · current Raps monitoring methods for subring port: ccm - CCM messags and link status will be used for raps monitoring, link-status -Link status will be used for raps monitoring
| ||||
| NprvtRingEpsConformance | 1.3.6.1.4.1.738.1.5.134.2 | |||
| NprvtRingEpsCompliances | 1.3.6.1.4.1.738.1.5.134.2.1 | |||
| MprvtRingEpsCompliance | 1.3.6.1.4.1.738.1.5.134.2.1.1 | |||
compliance · current The compliance statement for support of the Ring EPS MIB module. | ||||
| NprvtRingEpsGroups | 1.3.6.1.4.1.738.1.5.134.2.2 | |||
| GprvtRingEpsGroup | 1.3.6.1.4.1.738.1.5.134.2.2.1 | |||
group · current Objects for the RAPS instances group.
| ||||
| GprvtRingEpsVlanGroup | 1.3.6.1.4.1.738.1.5.134.2.2.2 | |||
group · current Objects for the RAPS monitored vlans group. | ||||
| GprvtRingEpsSubRingGroup | 1.3.6.1.4.1.738.1.5.134.2.2.3 | |||
group · current Objects for the RAPS subring group.
| ||||
| GprvtRingEpsNotificationsGroup | 1.3.6.1.4.1.738.1.5.134.2.2.4 | |||
group · current Objects for the Notifications group. | ||||
Textual conventions
PrvtRingEpsDefectTypeBitsrapsDprovisioningMismatch(0)Ring port designated as RPL (only valid if prvtRingEpsNodeRole is rapsNrRplOwner or rapsNrRplNeighborNode
PrvtRingEpsLocalCommandTypeINTEGERrapsLcClear(6)rapsLcExercise(1)rapsLcForcedSwitch(5)rapsLcLockoutOfProtection(7)rapsLcManualSwitch(2)rapsLcNoRequest(0)rapsLcSignalDegrade(3)rapsLcSignalFail(4)Local system state given by the top priority command received
PrvtRingEpsModeTypeINTEGERrapsMode8032v1(1)rapsMode8032v2(2)Version of the protocol the instance will use
PrvtRingEpsNodeRoleTypeINTEGERrapsNrRplNeighborNode(1)rapsNrRplOwner(2)rapsNrSimpleNode(0)Role of the defined node inside the protected ring
PrvtRingEpsPeerStatusTypeBitsbBlockedPortReference(2)bDoNotFlush(1)bRplBlocked(0)Status bits set in the received RAPS packet. The meanings are: bRplBlocked(0) The RPL link is blocked by the RPL owner. bDoNotFlush(1) RAPS sender requests that we do don flush our FDB. bBlockedPortReference(2) The port that is blocked by the sender of the RAPS packet.
PrvtRingEpsPortStatusTypeINTEGERrapsPsBlocked(1)rapsPsFailed(2)rapsPsOk(0)Status of the port link
PrvtRingEpsRemoteRequestTypeINTEGERrapsRsEvent(14)rapsRsForcedSwitch(13)rapsRsManualSwitch(7)rapsRsNoRequest(0)rapsRsNone(-1)rapsRsSignalFail(11)Remote command received via RAPS packets
PrvtRingEpsRplPortTypeINTEGERnone(2)port0(0)port1(1)Ring port designated as RPL (only valid if prvtRingEpsNodeRole is rapsNrRplOwner or rapsNrRplNeighborNode
PrvtRingEpsStateTypeINTEGERrapsForcedSwitch(4)rapsIdle(1)rapsInit(0)rapsManualSwitch(3)rapsPending(5)rapsProtection(2)State of the R-APS request processing logic
Traps / Notifications
- prvtRingEpsDefectAlarm
1.3.6.1.4.1.738.1.5.134.0.1 - prvtRingEpsSubRingDefectAlarm
1.3.6.1.4.1.738.1.5.134.0.3 - prvtRingEpsSubRingSwitchoverAlarm
1.3.6.1.4.1.738.1.5.134.0.4 - prvtRingEpsSwitchoverAlarm
1.3.6.1.4.1.738.1.5.134.0.2