PRVT-PW-TDM-MIB
B.A.T.M. Advance TechnologiesThis MIB contains managed object definitions for encapsulating TDM (T1,E1, T3, E3, NxDS0) as pseudo-wires over packet-switching networks (PSN).
snmptranslate -m PRVT-PW-TDM-MIB -Tpsnmpwalk -v2c -c <community> -m PRVT-PW-TDM-MIB <host> 1.3.6.1.4.1.738.1.5.200.2Imports
| IF-MIB | InterfaceIndexOrZero |
|---|---|
| PRVT-SWITCH-MIB | switch |
| PerfHist-TC-MIB | PerfCurrentCount, PerfIntervalCount |
| Q-BRIDGE-MIB | PortList |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, transmission |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, StorageType, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| NprvtPwVc | 1.3.6.1.4.1.738.1.5.200 | |||
| IprvtPwVcTDMMIB | 1.3.6.1.4.1.738.1.5.200.2 | |||
identity This MIB contains managed object definitions for encapsulating TDM (T1,E1, T3, E3, NxDS0) as pseudo-wires over packet-switching networks (PSN). | ||||
| NprvtPwVcTDMObjects | 1.3.6.1.4.1.738.1.5.200.2.1 | |||
| TprvtPwVcTDMTable | 1.3.6.1.4.1.738.1.5.200.2.1.1 | NA | ||
table · not-accessible · current This table contains basic information including ifIndex, and pointers to entries in the relevant TDM config tables for this TDM PW. | ||||
| RprvtPwVcTDMEntry | 1.3.6.1.4.1.738.1.5.200.2.1.1.1 | NA | ||
row · not-accessible · current This table is indexed by the same index that was created for the associated entry in the PW Table (in the PW-STD-MIB). An entry is created in this table by the agent for every entry in the prvtPwVcTable with a prvtPwVcType of 'TDM'. | ||||
| CprvtPwVcTDMModuleId | 1.3.6.1.4.1.738.1.5.200.2.1.1.1.1 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The ID of the CES Module where the crcuit is configured. | ||||
| CprvtPwVcTDMCircuitId | 1.3.6.1.4.1.738.1.5.200.2.1.1.1.2 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The ID of the CES Circuit that this PW represents. | ||||
| CprvtPwVcTDMType | 1.3.6.1.4.1.738.1.5.200.2.1.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies the type of TDM PW. The connection assumed to be symmetrical having the same value at both ends. To identify structured vs. unstructured type for DS1 and E1, dsx1LineType and dsx1SignalMode [DS1MIB] should be referenced. DS3 and E3 are always unstructured.
| ||||
| CprvtPwVcRelTDMCfgIndex | 1.3.6.1.4.1.738.1.5.200.2.1.1.1.4 | PrvtPwVcTDMCfgIndex | RO | |
column · PrvtPwVcTDMCfgIndex · read-only · current Index to the relevant TDM configuration table entry that appears in one of the related MIB modules such as SAToP,TDMoIP or CESoPSN. It is likely that multiple TDM PWs of the same characteristic will share a single configuration entry of the relevant type. | ||||
| CprvtPwVcTDMTimeElapsed | 1.3.6.1.4.1.738.1.5.200.2.1.1.1.5 | Integer32 (1..900) | RO | |
column · Integer32 (1..900) · read-only · current The number of seconds, including partial seconds, that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value. | ||||
| CprvtPwVcTDMValidIntervals | 1.3.6.1.4.1.738.1.5.200.2.1.1.1.6 | Integer32 (0..96) | RO | |
column · Integer32 (0..96) · read-only · current The number of previous 15-minute intervals for which data was collected. An agent with TDM capability must be capable of supporting at least n intervals. The minimum value of n is 4, The default of n is 32 and the maximum value of n is 96. The value will be <n> unless the measurement was (re-) started within the last (<n>*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases(e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available. | ||||
| CprvtPwVcTDMCurrentIndications | 1.3.6.1.4.1.738.1.5.200.2.1.1.1.7 | Bits | RO | |
column · Bits · read-only · current The following defects should be detected and reported upon request: -Stray packets MAY be detected by the PSN and multiplexing layers. Stray packets MUST be discarded by the CE-bound IWF and their detection MUST NOT affect mechanisms for detection of packet loss. -Malformed packets are detected by mismatch between the expected packet size (taking the value of the L bit into account) and the actual packet size inferred from the PSN and multiplexing layers. Malformed in-order packets MUST be discarded by the CE-bound IWF and replacement data generated as for lost packets. -Excessive packet loss rate is detected by computing the average packet loss rate over the value of prvtPwVcTDMAvePktLossTimeWindow and comparing it with a preconfigured threshold [SATOP]. -Buffer overrun is detected in the normal operation state when the CE bound IWF's jitter buffer cannot accommodate newly arrived packets. -Remote packet loss is indicated by reception of packets with their R bit set. -Packet misorder is detected by looking at the Sequence number provided by the control word. -TDM Fault, if L bit in the control word is set, it indicates that TDM data carried in the payload is invalid due an attachment circuit fault. When the L bit is set the payload MAY be omitted in order to conserve bandwidth. Note: the algorithm used to capture these indications is implementation specific.
| ||||
| CprvtPwVcTDMLatchedIndications | 1.3.6.1.4.1.738.1.5.200.2.1.1.1.8 | Bits | RO | |
column · Bits · read-only · current The state of TDM indicators when the TDM PW last declared an error second (either as ES, SES or a second with errors inside a UAS) condition. At this time, only LOPS can create a failure. Since indicators other than LOPS are useful, all are latched here. For bit definitions, see prvtPwVcTDMCurrentIndications above. Note: the algorithm used to latch these indications when entering an defect state is implementation specific.
| ||||
| CprvtPwVcTDMLastEsTimeStamp | 1.3.6.1.4.1.738.1.5.200.2.1.1.1.9 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime on the most recent occasion at which the TDM PW entered the ES or SES state. | ||||
| CprvtPwVcTDMEmulationMode | 1.3.6.1.4.1.738.1.5.200.2.1.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current The circuit emulation mode.
| ||||
| CprvtPwVcTDMOperStatus | 1.3.6.1.4.1.738.1.5.200.2.1.1.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current The operational status of the circuit.
| ||||
| CprvtPwVcTDMClearCircuitStatistics | 1.3.6.1.4.1.738.1.5.200.2.1.1.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current Clear circuit statistics.
| ||||
| TprvtPwVcTDMCfgTable | 1.3.6.1.4.1.738.1.5.200.2.1.3 | NA | ||
table · not-accessible · current This table contains a set of parameters that may be referenced by one or more TDM PWs in prvtPwVcTDMTable. | ||||
| RprvtPwVcTDMCfgEntry | 1.3.6.1.4.1.738.1.5.200.2.1.3.1 | NA | ||
row · not-accessible · current These parameters define the characteristics of a TDM PW. They are grouped here to ease NMS burden. Once an entry is created here it may be re-used by many PWs. | ||||
| CprvtPwVcTDMCfgPayloadSize | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.1 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The value of this object indicates the PayLoad Size to be defined during the PW setUp. Upon TX, implementation must be capable of carrying that amount of data. Upon RX, When the LEN field is set to 0, the payload of packet MUST assume this size, and if the actual packet size is inconsistent with this length, the packet MUST be considered to be malformed. | ||||
| CprvtPwVcTDMCfgPktReorder | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.2 | TruthValue | RC | |
column · TruthValue · read-create · current If set True: as CE bound packets are queued in the jitter buffer, out of order packets are re-ordered. The maximum sequence number differential (i.e., the range in which re-sequencing can occur) is dependant on the depth of the jitter buffer. See prvtPwVcTDMCfgJtrBfrDepth. NOTE: Some implementations may not support this feature. The agent is then required to set this False. | ||||
| CprvtPwVcTDMCfgRtpHdrUsed | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.3 | TruthValue | RC | |
column · TruthValue · read-create · current If set False: an RTP header is not pre-pended to the TDM packet. | ||||
| CprvtPwVcTDMCfgJtrBfrDepth | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.4 | Unsigned32 (1..200) | RC | |
column · Unsigned32 (1..200) · read-create · current The size of the Jitter buffer SHOULD be defined to a value that is capable to allow accommodation to the PSN-specific packet delay variation. If configured to a value not supported by the implementation, the agent MUST return an error code 'jtrBfrDepth' in 'prvtPwVcTDMConfigError ' NOTE: jitter buffers are a limited resource to be managed.
| ||||
| CprvtPwVcTDMCfgChannelGroup | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.5 | INTEGER (1..128) | RC | |
column · INTEGER (1..128) · read-create · current The circuit's channel group. This object is only valid if structured emulation mode is used. If a group is not set the value of the object is 0. | ||||
| CprvtPwVcTDMCfgPorts | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.6 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current A bitmap of themodule's TDM ports belongng to the circuit. | ||||
| CprvtPwVcTDMCfgPeerIpType | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current The type of the peer's IP address.
| ||||
| CprvtPwVcTDMCfgPeerIpAddress | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.8 | IpAddress | RC | |
column · IpAddress · read-create · current The peer's IP address. | ||||
| CprvtPwVcTDMCfgPeerPort | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.9 | INTEGER (0..65535) | RC | |
column · INTEGER (0..65535) · read-create · current The connection port. | ||||
| CprvtPwVcTDMCfgPeerMAC | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.10 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current The Peer MAC address. This object is only valid for Metro-Ethernet and Mpls circuits. If an IP address is configured for the circuit, this object will display the resolved MAC address. | ||||
| CprvtPwVcTDMCfgPeerEcid | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current The peer circuit identifier. This object is only valid if the Circuit protocol is metro-ethernet. | ||||
| CprvtPwVcTDMCfgPeerOosEcid | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current The peer circuit identifier for the out-of-band signaling. This value is valid only when the object prvtPwVcTDMCfgEcid is set and when the current protocol is metro-ethernet | ||||
| CprvtPwVcTDMCfgVlanId | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.13 | INTEGER (2..4094) | RC | |
column · INTEGER (2..4094) · read-create · current The circuit Vlan ID. | ||||
| CprvtPwVcTDMCfgVlanPrio | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.14 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current The prioirty for the VLAN set here, when the protocol for the circuit is metro-ethernet | ||||
| CprvtPwVcTDMCfgLocalPort | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.15 | INTEGER (0..65535) | RC | |
column · INTEGER (0..65535) · read-create · current Local UDP port. | ||||
| CprvtPwVcTDMCfgEcid | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.16 | INTEGER | RC | |
column · INTEGER · read-create · current The local circuit identifier. This object is only valid if the Circuit protocol is metro-ethernet. | ||||
| CprvtPwVcTDMCfgOosEcid | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.17 | INTEGER | RC | |
column · INTEGER · read-create · current The local circuit identifier for the out-of-band signaling. This value is valid only when the object prvtPwVcTDMCfgEcid is set and when the current protocol is metro-ethernet | ||||
| CprvtPwVcTDMCfgProtocol | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.18 | INTEGER | RC | |
column · INTEGER · read-create · current The emulation protocol.
| ||||
| CprvtPwVcTDMCfgAdminStatus | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.19 | INTEGER | RC | |
column · INTEGER · read-create · current The administrative status of the circuit.
| ||||
| CprvtPwVcTDMCfgRowStatus | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.20 | RowStatus | RC | |
column · RowStatus · read-create · current This field is used to create and destroy TDM circuits. | ||||
| CprvtPwVcTDMCfgRtp | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.21 | INTEGER | RC | |
column · INTEGER · read-create · current TRTP header.
| ||||
| CprvtPwVcTDMCfgOosPort | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.22 | Unsigned32 (0..65535) | RC | |
column · Unsigned32 (0..65535) · read-create · current Oos port. | ||||
| CprvtPwVcTDMCfgPayloadSuppression | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.23 | INTEGER | RC | |
column · INTEGER · read-create · current Controls payload suppression. Object does not require module to be restarted.
| ||||
| CprvtPwVcTDMCfgInterface | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.24 | PrvtPwVcTDMCfgInterface | RC | |
column · PrvtPwVcTDMCfgInterface · read-create · current Interface used for configuring OC3 TDM circuits P - Port Number, K,L,M standard numbering of SONET/SDH. | ||||
| CprvtPwVcTDMCfgIpTos | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.25 | INTEGER (0..255) | RC | |
column · INTEGER (0..255) · read-create · current Set/Show IP TOS information | ||||
| CprvtPwVcTDMCfgIpOosTos | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.26 | INTEGER (0..255) | RC | |
column · INTEGER (0..255) · read-create · current Set/Show IP Out Of Stream information | ||||
| CprvtPwVcTDMCfgPeerOosPort | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.27 | INTEGER (0..65535) | RC | |
column · INTEGER (0..65535) · read-create · current This field is used to SET Destination Oos Port | ||||
| CprvtPwVcTDMCfgMplsLocalLabel | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.28 | Unsigned32 (0..1048575) | RC | |
column · Unsigned32 (0..1048575) · read-create · current The local circuit identifier. This object is only valid if the Circuit protocol is MPLS | ||||
| CprvtPwVcTDMCfgMplsPeerLabel | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.29 | Unsigned32 (0..1048575) | RC | |
column · Unsigned32 (0..1048575) · read-create · current The peer circuit identifier. This object is only valid if the Circuit protocol is MPLS | ||||
| CprvtPwVcTDMCfgMplsTTL | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.30 | INTEGER (2..255) | RC | |
column · INTEGER (2..255) · read-create · current MPLS TTL | ||||
| CprvtPwVcTDMCfgMplsExp | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.31 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current MPLS EXP | ||||
| CprvtPwVcTDMCfgMplsOosLocalLabel | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.32 | Unsigned32 (0..1048575) | RC | |
column · Unsigned32 (0..1048575) · read-create · current The local circuit identifier for the out-of-band signaling. This object is only valid if the Circuit protocol is MPLS | ||||
| CprvtPwVcTDMCfgMplsOosPeerLabel | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.33 | Unsigned32 (0..1048575) | RC | |
column · Unsigned32 (0..1048575) · read-create · current The peer circuit identifier for the out-of-band signaling. This object is only valid if the Circuit protocol is MPLS | ||||
| CprvtPwVcTDMCfgMplsOosTTL | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.34 | INTEGER (2..255) | RC | |
column · INTEGER (2..255) · read-create · current MPLS TTL for the out-of-band signaling. | ||||
| CprvtPwVcTDMCfgMplsOosExp | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.35 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current MPLS EXP for the out-of-band signaling. | ||||
| CprvtPwVcTDMCfgRtpOosPayload | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.36 | INTEGER (0..127) | RC | |
column · INTEGER (0..127) · read-create · current This field is used to SET RTP Oos payload type. | ||||
| CprvtPwVcTDMCfgRtpPayload | 1.3.6.1.4.1.738.1.5.200.2.1.3.1.37 | INTEGER (0..127) | RC | |
column · INTEGER (0..127) · read-create · current This field is used to SET RTP payload type. | ||||
| TprvtTDMChannelGrpTable | 1.3.6.1.4.1.738.1.5.200.2.1.4 | NA | ||
table · not-accessible · current This table contains the set of available channel groups. | ||||
| RprvtTDMChannelGrpEntry | 1.3.6.1.4.1.738.1.5.200.2.1.4.1 | NA | ||
row · not-accessible · current These parameters are used to configure a CES channel group. | ||||
| CprvtTDMChannelGrpModuleID | 1.3.6.1.4.1.738.1.5.200.2.1.4.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The index of the module to which this channel group belongs. | ||||
| CprvtTDMChannelGrpID | 1.3.6.1.4.1.738.1.5.200.2.1.4.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The channel group ID. | ||||
| CprvtTDMChannelGrpCfgError | 1.3.6.1.4.1.738.1.5.200.2.1.4.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This object displays the correctness of the configuration. If it has a value of channelGroupAtached(1) this channel group has been attached to a circuit and the new configuration cannot be applied.
| ||||
| CprvtTDMChannelGrpTimeSlots | 1.3.6.1.4.1.738.1.5.200.2.1.4.1.4 | TimeSlotList | RW | |
column · TimeSlotList · read-write · current This object is used to configure which time slots are members of the given channel group. | ||||
| CprvtTDMChannelGrpOC3TimeSlots | 1.3.6.1.4.1.738.1.5.200.2.1.4.1.5 | InterfaceTimeSlot | RW | |
column · InterfaceTimeSlot · read-write · current This object is used to configure interface and time slots for the given channel group in OC3 module. | ||||
| TprvtPwVcTDMPerfCurrentTable | 1.3.6.1.4.1.738.1.5.200.2.1.5 | NA | ||
table · not-accessible · current The current 15 minute interval counts are in this table. This table provides per TDM PW performance information. | ||||
| RprvtPwVcTDMPerfCurrentEntry | 1.3.6.1.4.1.738.1.5.200.2.1.5.1 | NA | ||
row · not-accessible · current An entry in this table is created by the agent for every prvtPwVcTDM entry. After 15 minutes, the contents of this table entry are copied to a new entry in the prvtPwVcTDMPerfInterval table and the counts in this entry are reset to zero. | ||||
| CprvtPwVcTDMPerfCurrentPktsOoseq | 1.3.6.1.4.1.738.1.5.200.2.1.5.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current Number of packets detected out of sequence (via TDM header sequence numbers), but successfully re-ordered. Note: some implementations may not support this Feature. | ||||
| CprvtPwVcTDMPerfCurrentJtrBfrUnderruns | 1.3.6.1.4.1.738.1.5.200.2.1.5.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current Number of times a packet needed to be played out and the jitter buffer was empty. | ||||
| CprvtPwVcTDMPerfCurrentJtrBfrOverruns | 1.3.6.1.4.1.738.1.5.200.2.1.5.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current Number of packets detected out of range (via TDM header sequence numbers), and could not be re- ordered, or could not fit in the jitter buffer. | ||||
| CprvtPwVcTDMPerfCurrentMalformedPkt | 1.3.6.1.4.1.738.1.5.200.2.1.5.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current Number of packets detected with unexpected size, or bad headers' stack | ||||
| CprvtPwVcTDMPerfCurrentNearEndFC | 1.3.6.1.4.1.738.1.5.200.2.1.5.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current Number of local packet failures. | ||||
| CprvtPwVcTDMPerfCurrentFarEndFC | 1.3.6.1.4.1.738.1.5.200.2.1.5.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current Number of remote packet failures. | ||||
| TprvtPwVcTDMPerfIntervalTable | 1.3.6.1.4.1.738.1.5.200.2.1.6 | NA | ||
table · not-accessible · current This table provides performance information per TDM PW similar to the prvtPwVcTDMPerfCurrentTable above. However, these counts represent historical 15 minute intervals. Typically, this table will have a maximum of 96 entries for a 24 hour period, but is not limited to this. | ||||
| RprvtPwVcTDMPerfIntervalEntry | 1.3.6.1.4.1.738.1.5.200.2.1.6.1 | NA | ||
row · not-accessible · current An entry in this table is created by the agent for every prvtPwVcTDMPerfCurrentEntry that is 15 minutes old. The contents of the Current entry are copied to the new entry here. The Current entry, then resets its counts to zero for the next current 15 minute interval. | ||||
| CprvtPwVcTDMPerfIntervalNumber | 1.3.6.1.4.1.738.1.5.200.2.1.6.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current A number (normally between 1 and 96 to cover a 24 hour period) which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. The minimum range of N is 1 through 4. The default range is 1 through 32. The maximum value of N is 1 through 96. | ||||
| CprvtPwVcTDMPerfIntervalValidData | 1.3.6.1.4.1.738.1.5.200.2.1.6.1.2 | TruthValue | RO | |
column · TruthValue · read-only · current This variable indicates if the data for this interval is valid. | ||||
| CprvtPwVcTDMPerfIntervalDuration | 1.3.6.1.4.1.738.1.5.200.2.1.6.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The duration of a particular interval in seconds, Adjustments in the system's time-of-day clock, may cause the interval to be greater or less than, the normal value. Therefore this actual interval value is provided. | ||||
| CprvtPwVcTDMPerfIntervalPktsOoseq | 1.3.6.1.4.1.738.1.5.200.2.1.6.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current Number of packets detected out of sequence (via TDM header sequence numbers), but successfully re-ordered. Note: some implementations mat not support this feature. | ||||
| CprvtPwVcTDMPerfIntervalJtrBfrUnderruns | 1.3.6.1.4.1.738.1.5.200.2.1.6.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current Number of times a packet needed to be played out and the jitter buffer was empty. | ||||
| CprvtPwVcTDMPerfIntervalJtrBfrOverruns | 1.3.6.1.4.1.738.1.5.200.2.1.6.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current Number of packets detected out of range (via TDM header sequence numbers), and could not be re- ordered, or could not fit in the jitter buffer. | ||||
| CprvtPwVcTDMPerfIntervalMalformedPkt | 1.3.6.1.4.1.738.1.5.200.2.1.6.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current Number of packets detected with unexpected size, or bad headers' stack | ||||
| CprvtPwVcTDMPerfIntervalNearEndFC | 1.3.6.1.4.1.738.1.5.200.2.1.6.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current Number of local packet failures. | ||||
| CprvtPwVcTDMPerfIntervalFarEndFC | 1.3.6.1.4.1.738.1.5.200.2.1.6.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current Number of remote packet failures. | ||||
| TprvtPwVcTDMPerfTable | 1.3.6.1.4.1.738.1.5.200.2.1.7 | NA | ||
table · not-accessible · current This table provides performance information per TDM PW similar to the prvtPwVcTDMPerfIntervalTable above. However, these counters represent complete historical information. | ||||
| RprvtPwVcTDMPerfEntry | 1.3.6.1.4.1.738.1.5.200.2.1.7.1 | NA | ||
row · not-accessible · current An entry is created in this table by the agent for every entry in the prvtPwVcTDM table. | ||||
| CprvtPwVcTDMPerfPktsOoseq | 1.3.6.1.4.1.738.1.5.200.2.1.7.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current Number of packets detected out of sequence (via TDM header sequence numbers), but successfully re-ordered. Note: some implementations may not support this feature. | ||||
| CprvtPwVcTDMPerfJtrBfrUnderruns | 1.3.6.1.4.1.738.1.5.200.2.1.7.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current Number of times a packet needed to be played out and the jitter buffer was empty. | ||||
| CprvtPwVcTDMPerfJtrBfrOverruns | 1.3.6.1.4.1.738.1.5.200.2.1.7.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current Number of packets detected out of range (via TDM header sequence numbers), and could not be re- ordered, or could not fit in the jitter buffer. | ||||
| CprvtPwVcTDMPerfMalformedPkt | 1.3.6.1.4.1.738.1.5.200.2.1.7.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current Number of packets detected with unexpected size, or bad headers' stack. | ||||
| CprvtPwVcTDMPerfDiscontinuityTime | 1.3.6.1.4.1.738.1.5.200.2.1.7.1.5 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value. | ||||
| CprvtPwVcTDMPerfNearEndFC | 1.3.6.1.4.1.738.1.5.200.2.1.7.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current Number of local packet failures. | ||||
| CprvtPwVcTDMPerfFarEndFC | 1.3.6.1.4.1.738.1.5.200.2.1.7.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current Number of remote packet failures. | ||||
| TprvtPwVcTDMAlarmTable | 1.3.6.1.4.1.738.1.5.200.2.1.8 | NA | ||
table · not-accessible · current This table contains object for configuring and displaying CES Circuits TCA thresholds. | ||||
| RprvtPwVcTDMAlarmEntry | 1.3.6.1.4.1.738.1.5.200.2.1.8.1 | NA | ||
row · not-accessible · current | ||||
| CprvtPwVcTDMAlarmIndex | 1.3.6.1.4.1.738.1.5.200.2.1.8.1.1 | Gauge32 | NA | |
column · Gauge32 · not-accessible · current An integer uniquely identifying an alarm entry. | ||||
| CprvtPwVcTDMAlarmVariable | 1.3.6.1.4.1.738.1.5.200.2.1.8.1.2 | OBJECT IDENTIFIER | RO | |
column · OBJECT IDENTIFIER · read-only · current The OID of the variable whose value is being monitored. Depending on the time interval, the error condition and the modue and circuit ID, this points to an object from an entry in prvtPwVcTDMPerfCurrentTable or prvtPwVcTDMPerfTable. | ||||
| CprvtPwVcTDMAlarmThreshold | 1.3.6.1.4.1.738.1.5.200.2.1.8.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The alarm condition threshold for this alarm entry. The alarm is triggered if the value of the object pointed by prvtPwVcTDMAlarmVariable remains above this threshold for more than 3 seconds. | ||||
| CprvtPwVcTDMAlarmValue | 1.3.6.1.4.1.738.1.5.200.2.1.8.1.4 | INTEGER | AN | |
column · INTEGER · accessible-for-notify · current The value of the object pointed to by prvtPwVcTDMAlarmVariable, present for notification purposes. | ||||
| NprvtPwVcTDMTraps | 1.3.6.1.4.1.738.1.5.200.2.2 | |||
| !prvtPwVcTDMAlarm | 1.3.6.1.4.1.738.1.5.200.2.2.1 | |||
notification · current This notification is sent when the value of a TDM port error condition statistic has exceeded the configured threshold, or the value has dropped back below the threshold. | ||||
| !prvtPwVcTDMStatusChange | 1.3.6.1.4.1.738.1.5.200.2.2.2 | |||
notification · current This notification is sent when the operational or administrative status of circuit changes. | ||||
| NprvtPwVcTDMConformance | 1.3.6.1.4.1.738.1.5.200.2.3 | |||
| NprvtPwVcTDMGroups | 1.3.6.1.4.1.738.1.5.200.2.3.1 | |||
| GprvtPwVcTDMGroup | 1.3.6.1.4.1.738.1.5.200.2.3.1.1 | |||
group · current Collection of objects for basic TDM PW config and status. | ||||
| GprvtPwVcTDMPerfCurrentGroup | 1.3.6.1.4.1.738.1.5.200.2.3.1.2 | |||
group · current Collection of current statistics objects for TDM PWs. | ||||
| GprvtPwVcTDMPerfIntervalGroup | 1.3.6.1.4.1.738.1.5.200.2.3.1.3 | |||
group · current Collection of Interval statistics objects for TDM PWs. | ||||
| GprvtPwVcTDMPerfGroup | 1.3.6.1.4.1.738.1.5.200.2.3.1.4 | |||
group · current Collection of running statistics objects for TDM PWs. | ||||
| GprvtPwVcTDMNotificationsGroup | 1.3.6.1.4.1.738.1.5.200.2.3.1.5 | |||
group · current The group of supported notifications. | ||||
| NprvtPwVcTDMCompliances | 1.3.6.1.4.1.738.1.5.200.2.3.2 | |||
| MprvtPwTDMModuleCompliance | 1.3.6.1.4.1.738.1.5.200.2.3.2.1 | |||
compliance · current The compliance statement for agent that support PW over TDM PSN operation. | ||||
Textual conventions
InterfaceTimeSlotOCTET STRINGThe first 4 octets of this value represent the interface of the given channel group P.K.L.M.The last 32 bits of the 4 octets represent a bitmask of the time slots
PrvtPwVcTDMCfgIndexUnsigned32Index into any of the relevant prvtPwVcXXXCfgTable.
PrvtPwVcTDMCfgInterfaceIpAddressInterface of the given circuit used in TDM config for OC3 modules
TimeSlotListOCTET STRINGEach octet within this value specifies a time slot included in the give channel group. There should be 32 bits of 4 octets for each port of the CES module. Note that if the line type is set to T1 only the first 24 bits of each 4 octests can be set. The most significant bit of the list indicates timeslot 1 of port 1, the 33th bit - timeslot 1 of port 2, etc. If the bit is set, the port is included in the given channel group.
Traps / Notifications
- prvtPwVcTDMAlarm
1.3.6.1.4.1.738.1.5.200.2.2.1 - prvtPwVcTDMStatusChange
1.3.6.1.4.1.738.1.5.200.2.2.2