PRVT-JDSU-MIB
B.A.T.M. Advance TechnologiesThis MIB provide control and analisys for JDSU functionality.
snmptranslate -m PRVT-JDSU-MIB -Tpsnmpwalk -v2c -c <community> -m PRVT-JDSU-MIB <host> 1.3.6.1.4.1.738.1.5.137Imports
| IF-MIB | ifIndex |
|---|---|
| PRVT-SWITCH-MIB | switch |
| Q-BRIDGE-MIB | VlanId |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IprvtJdsuMib | 1.3.6.1.4.1.738.1.5.137 | |||
identity This MIB provide control and analisys for JDSU functionality. | ||||
| NprvtJdsuNotifications | 1.3.6.1.4.1.738.1.5.137.0 | |||
| !prvtJdsuAdminStateChange | 1.3.6.1.4.1.738.1.5.137.0.1 | |||
notification · current This trap should be sent whenever a JDSU admins state is changed for a specific interface.
| ||||
| !prvtJdsuOperStateChange | 1.3.6.1.4.1.738.1.5.137.0.2 | |||
notification · current This trap should be sent whenever a JDSU state is changed on a specific interface. | ||||
| NprvtJdsuObjects | 1.3.6.1.4.1.738.1.5.137.1 | |||
| NprvtJdsuLoopback | 1.3.6.1.4.1.738.1.5.137.1.1 | |||
| TprvtJdsuLoopbackTable | 1.3.6.1.4.1.738.1.5.137.1.1.1 | NA | ||
table · not-accessible · current This table holds the configuration for JDSU loopback | ||||
| RprvtJdsuLoopbackEntry | 1.3.6.1.4.1.738.1.5.137.1.1.1.1 | NA | ||
| CprvtJdsuLoopbackAdminStatus | 1.3.6.1.4.1.738.1.5.137.1.1.1.1.1 | INTEGER | RC | |
column · INTEGER · read-create · current JDSU remote loopback admin status. This can be used to either enable or disable JDSU loopback on a certain interface. Forced parameter is used for manually set loopback. Remote parameter is used for JDSU remote operation.
| ||||
| CprvtJdsuLoopbackRemoteMac | 1.3.6.1.4.1.738.1.5.137.1.1.1.1.2 | MacAddress | RW | |
column · MacAddress · read-write · current Remote MAC address of the device for JDSU loopback testing. | ||||
| CprvtJdsuLoopbackRemoteInnerVlan | 1.3.6.1.4.1.738.1.5.137.1.1.1.1.3 | VlanId | RW | |
column · VlanId · read-write · current This is used as the VLAN tag in case of single encapsulated packets or as the inner VLAN tag in case of dual encapsulated packets. | ||||
| CprvtJdsuLoopbackRemoteOuterVlan | 1.3.6.1.4.1.738.1.5.137.1.1.1.1.4 | VlanId | RW | |
column · VlanId · read-write · current The outer VLAN tag in case of dual encapsulated packets. | ||||
| CprvtJdsuLoopbackOperationalStatus | 1.3.6.1.4.1.738.1.5.137.1.1.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current JDSU remote loopback current operational status.
| ||||
| CprvtJdsuLoopbackRowStatus | 1.3.6.1.4.1.738.1.5.137.1.1.1.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current The status of the row entry. The writable columns in a row can not be changed if the row is active. Certain columns must have a valid value before a row can be activated. | ||||
| NprvtJdsuConformance | 1.3.6.1.4.1.738.1.5.137.2 | |||
| NprvtJdsuCompliances | 1.3.6.1.4.1.738.1.5.137.2.1 | |||
| MprvtJdsuCompliance | 1.3.6.1.4.1.738.1.5.137.2.1.1 | |||
compliance · current The compliance statement for support of the private JDSU MIB module. | ||||
| NprvtJdsuGroups | 1.3.6.1.4.1.738.1.5.137.2.2 | |||
| GprvtJdsuLoopbackGroup | 1.3.6.1.4.1.738.1.5.137.2.2.1 | |||
group · current Objects for the JDSU loopback group. | ||||
| GprvtJdsuLoopbackNotificationsGroup | 1.3.6.1.4.1.738.1.5.137.2.2.2 | |||
group · current Objects for the Event Propagation notifications group. | ||||
Traps / Notifications
- prvtJdsuAdminStateChange
1.3.6.1.4.1.738.1.5.137.0.1 - prvtJdsuOperStateChange
1.3.6.1.4.1.738.1.5.137.0.2