PRVT-CES-MIB
B.A.T.M. Advance TechnologiesThis module includes configuration parameters for DS1 modules not included in DS1-MIB.
snmptranslate -m PRVT-CES-MIB -Tpsnmpwalk -v2c -c <community> -m PRVT-CES-MIB <host> 1.3.6.1.4.1.738.1.5.111Imports
| DS1-MIB | dsx1ConfigEntry |
|---|---|
| PRVT-SWITCH-MIB | switch |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TimeStamp |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IprvtCESMib | 1.3.6.1.4.1.738.1.5.111 | |||
identity This module includes configuration parameters for DS1 modules not included in DS1-MIB. | ||||
| NprvtCESNotifications | 1.3.6.1.4.1.738.1.5.111.0 | |||
| !prvtCESDsx1Alarm | 1.3.6.1.4.1.738.1.5.111.0.1 | |||
notification · current This notification is sent when the value of a TDM port error condition statistic has exceeded the configured threshold. | ||||
| !prvtCESModuleAvailable | 1.3.6.1.4.1.738.1.5.111.0.2 | |||
| !prvtCESModuleUnAvailableDueExtract | 1.3.6.1.4.1.738.1.5.111.0.3 | |||
| !prvtCESModuleUnAvailableDueReload | 1.3.6.1.4.1.738.1.5.111.0.4 | |||
| NprvtCESObjects | 1.3.6.1.4.1.738.1.5.111.1 | |||
| TprvtCESDsx1ExtTable | 1.3.6.1.4.1.738.1.5.111.1.1 | NA | ||
table · not-accessible · current This table contains object for configuring DS1 interfaces, not supported in dsx1ConfigTable. | ||||
| RprvtCESDsx1ExtEntry | 1.3.6.1.4.1.738.1.5.111.1.1.1 | NA | ||
| CprvtCESE1Impedance | 1.3.6.1.4.1.738.1.5.111.1.1.1.1 | E1Impedance | RW | |
column · E1Impedance · read-write · current This object configures temination impedance for TDM ports if the line type is E1. | ||||
| CprvtCEST1GainLimit | 1.3.6.1.4.1.738.1.5.111.1.1.1.2 | T1GainLimit | RW | |
column · T1GainLimit · read-write · current This object configures Tx or Rx gain limit for TDM ports if the line type is T1. | ||||
| CprvtCESPortShutdown | 1.3.6.1.4.1.738.1.5.111.1.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Shutdown TDM port.
| ||||
| CprvtCESPortLineType | 1.3.6.1.4.1.738.1.5.111.1.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Additional line types. For reference see object dsx1LineType
| ||||
| CprvtCEST1LongCableLength | 1.3.6.1.4.1.738.1.5.111.1.1.1.5 | T1LongCableLength | RW | |
column · T1LongCableLength · read-write · current Long cable length options for T1 mode. | ||||
| CprvtCESPortOperStatus | 1.3.6.1.4.1.738.1.5.111.1.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current TDM link state.
| ||||
| CprvtCESClearPortStatistics | 1.3.6.1.4.1.738.1.5.111.1.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Clear port statistics.
| ||||
| CprvtCESServiceClock | 1.3.6.1.4.1.738.1.5.111.1.1.1.8 | ServiceClock | RW | |
column · ServiceClock · read-write · current Service Clock available only for DS1 interface. | ||||
| TprvtCESModuleConfTable | 1.3.6.1.4.1.738.1.5.111.1.2 | NA | ||
table · not-accessible · current This table contains object for configuring options that are applied to the entire module. | ||||
| RprvtCESModuleConfEntry | 1.3.6.1.4.1.738.1.5.111.1.2.1 | NA | ||
| CprvtCESModuleIndex | 1.3.6.1.4.1.738.1.5.111.1.2.1.1 | Integer32 (1..65535) | AN | |
column · Integer32 (1..65535) · accessible-for-notify · current Index of each CES module installed. | ||||
| CprvtCESModuleLineType | 1.3.6.1.4.1.738.1.5.111.1.2.1.2 | CESLineType | RW | |
column · CESLineType · read-write · current Line mode for the module. | ||||
| CprvtCESModuleTxClock | 1.3.6.1.4.1.738.1.5.111.1.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Configures Transmit Source Clock for the module.
| ||||
| CprvtCESModuleTxBackupClock | 1.3.6.1.4.1.738.1.5.111.1.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Configures Backup Clock for the module.
| ||||
| CprvtCESModuleConfig | 1.3.6.1.4.1.738.1.5.111.1.2.1.5 | ConfigAction | RW | |
column · ConfigAction · read-write · current When this object is set to applyConfiguration(2), the module is restarted and the changes in dsx1ConfigTable or prvtCESConfTable are applied. The object must be set to rejectConfiguration(3) to remove unapplied changes. If the object is set to restart(4), the module is restarted with applying the changes. This object always returns a value of noop(1) when get. | ||||
| CprvtCESModuleIPAddress | 1.3.6.1.4.1.738.1.5.111.1.2.1.6 | IpAddress | RW | |
column · IpAddress · read-write · current The CES Module IP address after configuration is applied. | ||||
| CprvtCESModuleIPAddressMask | 1.3.6.1.4.1.738.1.5.111.1.2.1.7 | IpAddress | RW | |
column · IpAddress · read-write · current The CES Module IP address mask after configuration is applied. | ||||
| CprvtCESModuleGateway | 1.3.6.1.4.1.738.1.5.111.1.2.1.8 | IpAddress | RW | |
column · IpAddress · read-write · current CES Module Gateway after configuration is applied. | ||||
| CprvtCESModuleUpTime | 1.3.6.1.4.1.738.1.5.111.1.2.1.9 | TimeStamp | RO | |
column · TimeStamp · read-only · current CES Up Time | ||||
| CprvtCESModuleMACAddress | 1.3.6.1.4.1.738.1.5.111.1.2.1.10 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current CES MAC Address | ||||
| CprvtCESModuleHardwareRevision | 1.3.6.1.4.1.738.1.5.111.1.2.1.11 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current CES Hardware revision | ||||
| CprvtCESModuleFirmwareVersion | 1.3.6.1.4.1.738.1.5.111.1.2.1.12 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current CES Firmware revision | ||||
| CprvtCESModuleClearCircuitStatistics | 1.3.6.1.4.1.738.1.5.111.1.2.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current Clear circuits statistics.
| ||||
| CprvtCESModuleLbit | 1.3.6.1.4.1.738.1.5.111.1.2.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/disable L bit set upon AIS defect detection, in structure agnostic mode.
| ||||
| CprvtCESModulePolicyLops | 1.3.6.1.4.1.738.1.5.111.1.2.1.15 | INTEGER | RW | |
column · INTEGER · read-write · current Controls policy lops. Object does not require module to be restarted.
| ||||
| CprvtCESModulePolicyLbit | 1.3.6.1.4.1.738.1.5.111.1.2.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current Controls policy lbit. Object does not require module to be restarted.
| ||||
| CprvtCESModulePolicyRbit | 1.3.6.1.4.1.738.1.5.111.1.2.1.17 | INTEGER | RW | |
column · INTEGER · read-write · current Controls policy rbit. Object does not require module to be restarted.
| ||||
| CprvtCESModulePolicyRd | 1.3.6.1.4.1.738.1.5.111.1.2.1.18 | INTEGER | RW | |
column · INTEGER · read-write · current Controls policy rd. Object does not require module to be restarted.
| ||||
| CprvtCESModulePolicyIdlePattern | 1.3.6.1.4.1.738.1.5.111.1.2.1.19 | Unsigned32 (0..255) | RW | |
column · Unsigned32 (0..255) · read-write · current Controls policy idle pattern. Object does not require module to be restarted. | ||||
| CprvtCESModulePolicyIdleSignalling | 1.3.6.1.4.1.738.1.5.111.1.2.1.20 | Unsigned32 (1..15) | RW | |
column · Unsigned32 (1..15) · read-write · current Controls policy idle signalling. Object does not require module to be restarted. | ||||
| CprvtCESModulePolicyLopsEnter | 1.3.6.1.4.1.738.1.5.111.1.2.1.21 | Integer32 (1..1023) | RW | |
column · Integer32 (1..1023) · read-write · current Controls the number of consecutive missed packets required to enter LOPS state. Object does not require module to be restarted. | ||||
| CprvtCESModulePolicyLopsExit | 1.3.6.1.4.1.738.1.5.111.1.2.1.22 | Integer32 (1..1023) | RW | |
column · Integer32 (1..1023) · read-write · current Controls the number of consecutive missed packets required to exit LOPS state. Object does not require module to be restarted. | ||||
| CprvtCESModulePolicyuUnstrLbit | 1.3.6.1.4.1.738.1.5.111.1.2.1.23 | INTEGER | RW | |
column · INTEGER · read-write · current If a packet is received with L bit set, and the payload is present (not suppressed), one of the following is sent to the TDM line, according to a globally configurable unstructured L-flag policy: The AIS pattern all-one The received payload as-is none
| ||||
| CprvtCESModulePolicyuStrReplace | 1.3.6.1.4.1.738.1.5.111.1.2.1.24 | INTEGER | RW | |
column · INTEGER · read-write · current If a missing packet is detected, one of the following is sent to the TDM line, according to a globally configurable structured missing packet replacement policy: The AIS pattern all-one on the relevant timeslots The configured IDLE pattern
| ||||
| CprvtCESModulePolicyuUnstrReplace | 1.3.6.1.4.1.738.1.5.111.1.2.1.25 | INTEGER | RW | |
column · INTEGER · read-write · current If a missing packet is detected, one of the following is sent to the TDM line, according to a globally configurable unstructured missing packet replacement policy: The AIS pattern all-one The configured IDLE pattern
| ||||
| CprvtCESModulePolicyuUnstrLops | 1.3.6.1.4.1.738.1.5.111.1.2.1.26 | INTEGER | RW | |
column · INTEGER · read-write · current If a CES circuit enters the LOPS state, one of the following is sent to the TDM line, according to a globally configurable unstructured missing packet replacement policy: The AIS pattern all-one The contents of the jitter buffer - none
| ||||
| CprvtCESModuleServiceClock | 1.3.6.1.4.1.738.1.5.111.1.2.1.27 | ServiceClock | RW | |
column · ServiceClock · read-write · current Clock mode for CES module | ||||
| CprvtCESModulePolicyuUnstrReplacePattern | 1.3.6.1.4.1.738.1.5.111.1.2.1.28 | Integer32 (1..255) | RW | |
column · Integer32 (1..255) · read-write · current Unstructured packet replace policy pattern number | ||||
| TprvtCESUnappTable | 1.3.6.1.4.1.738.1.5.111.1.3 | NA | ||
table · not-accessible · current This table displays CES module configuration which will take effect after prvtCESModuleConf is set to applyConfiguration(2). | ||||
| RprvtCESUnappEntry | 1.3.6.1.4.1.738.1.5.111.1.3.1 | NA | ||
| CprvtCESUnappLineType | 1.3.6.1.4.1.738.1.5.111.1.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The value of dsx1LineType before configuration is applied.
| ||||
| CprvtCESUnappLineCoding | 1.3.6.1.4.1.738.1.5.111.1.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The value of dsx1LineCoding before configuration is applied.
| ||||
| CprvtCESUnappLoopbackConfig | 1.3.6.1.4.1.738.1.5.111.1.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The value of dsx1LoopbackConfig before configuration is applied.
| ||||
| CprvtCESUnappSignalMode | 1.3.6.1.4.1.738.1.5.111.1.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The value of dsx1SignalMode before configuration is applied.
| ||||
| CprvtCESUnappTransmitClockSource | 1.3.6.1.4.1.738.1.5.111.1.3.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The value of dsx1TransmitClockSource before configuration is applied.
| ||||
| CprvtCESUnappTransmitClockBackup | 1.3.6.1.4.1.738.1.5.111.1.3.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The value of dsx1TransmitClockBackup before configuration is applied.
| ||||
| CprvtCESUnappLineLength | 1.3.6.1.4.1.738.1.5.111.1.3.1.7 | Integer32 (0..64000) | RO | |
column · Integer32 (0..64000) · read-only · current The value of dsx1LineLength before configuration is applied.
| ||||
| CprvtCESUnappLineMode | 1.3.6.1.4.1.738.1.5.111.1.3.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The value of dsx1LineMode before configuration is applied.
| ||||
| CprvtCESUnappLineBuildOut | 1.3.6.1.4.1.738.1.5.111.1.3.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The value of dsx1LineBuildOut before configuration is applied.
| ||||
| CprvtCESUnappE1Impedance | 1.3.6.1.4.1.738.1.5.111.1.3.1.10 | E1Impedance | RO | |
column · E1Impedance · read-only · current The value of prvtCESE1Impedance before configuration is applied. | ||||
| CprvtCESUnappT1GainLimit | 1.3.6.1.4.1.738.1.5.111.1.3.1.11 | T1GainLimit | RO | |
column · T1GainLimit · read-only · current The value of prvtCEST1GainLimit before configuration is applied. | ||||
| CprvtCESUnappIPAddress | 1.3.6.1.4.1.738.1.5.111.1.3.1.12 | IpAddress | RO | |
column · IpAddress · read-only · current The CES Module IP address before configuration is applied. | ||||
| CprvtCESUnappIPAddressMask | 1.3.6.1.4.1.738.1.5.111.1.3.1.13 | IpAddress | RO | |
column · IpAddress · read-only · current The CES Module IP address mask before configuration is applied. | ||||
| CprvtCESUnappGateway | 1.3.6.1.4.1.738.1.5.111.1.3.1.14 | IpAddress | RO | |
column · IpAddress · read-only · current The CES Module Gateway before configuration is applied. | ||||
| TprvtCESDsx1AlarmTable | 1.3.6.1.4.1.738.1.5.111.1.4 | NA | ||
table · not-accessible · current This table contains object for configuring and displaying TDM ports TCA thresholds. | ||||
| RprvtCESDsx1AlarmEntry | 1.3.6.1.4.1.738.1.5.111.1.4.1 | NA | ||
| CprvtCESDsx1AlarmPort | 1.3.6.1.4.1.738.1.5.111.1.4.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current The DS1 port for which this alarm is configured. | ||||
| CprvtCESDsx1AlarmIndex | 1.3.6.1.4.1.738.1.5.111.1.4.1.2 | Gauge32 | NA | |
column · Gauge32 · not-accessible · current An integer uniquely identifying an alarm entry. | ||||
| CprvtCESDsx1AlarmVariable | 1.3.6.1.4.1.738.1.5.111.1.4.1.3 | OBJECT IDENTIFIER | RO | |
column · OBJECT IDENTIFIER · read-only · current The OID of the variable whose value is being monitored. Depending on the time interval, the error condition and the ifIndex of the TDM interface, this points to an object from an entry in dsx1CurrentTable or dsx1TotalTable. | ||||
| CprvtCESDsx1AlarmThreshold | 1.3.6.1.4.1.738.1.5.111.1.4.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current The alarm condition threshold for this alarm entry. The alarm is triggered if the value of the object pointed by prvtCESDsx1AlarmVariable remains above this threshold for more than 3 seconds. | ||||
| CprvtCESDsx1AlarmValue | 1.3.6.1.4.1.738.1.5.111.1.4.1.5 | Integer32 | AN | |
column · Integer32 · accessible-for-notify · current The value of the object pointed to by prvtCESDsx1AlarmVariable, present for notification purposes. | ||||
| SprvtCESAlarmMonitor | 1.3.6.1.4.1.738.1.5.111.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current CES alarm monitor
| ||||
| TprvtCESCICTable | 1.3.6.1.4.1.738.1.5.111.1.6 | NA | ||
table · not-accessible · current This table contains objects for configuring Clock Input Controller. | ||||
| RprvtCESCICEntry | 1.3.6.1.4.1.738.1.5.111.1.6.1 | NA | ||
| CprvtCESCICModuleId | 1.3.6.1.4.1.738.1.5.111.1.6.1.1 | Integer32 (1..255) | NA | |
column · Integer32 (1..255) · not-accessible · current Slot of CES module installed. | ||||
| CprvtCESCICNumber | 1.3.6.1.4.1.738.1.5.111.1.6.1.2 | Gauge32 | NA | |
column · Gauge32 · not-accessible · current An integer uniquely identifying a Clock Input Controller. | ||||
| CprvtCESCICClockNumber | 1.3.6.1.4.1.738.1.5.111.1.6.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current This variable indicates the index of the clock the clock input controller belongs to | ||||
| CprvtCESCICMode | 1.3.6.1.4.1.738.1.5.111.1.6.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The mode of the clock input controller. Not all clock input controllers support all modes. The clock input controller status is 'locked' only if the clock input controller is in 'normal' mode.
| ||||
| CprvtCESCICTdmPort | 1.3.6.1.4.1.738.1.5.111.1.6.1.5 | Integer32 (0..4) | RW | |
column · Integer32 (0..4) · read-write · current If the clock input controller recovers a clock from a port , this variable indicates the TDM Port. Otherwise, it must be set to zero. | ||||
| CprvtCESCICCircuit | 1.3.6.1.4.1.738.1.5.111.1.6.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current If the clock input controller recovers a clock from a circuit, this variable indicates the circuit ID. Otherwise, it must be set to zero. | ||||
| CprvtCESCICStatus | 1.3.6.1.4.1.738.1.5.111.1.6.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The status of the input reference.Reference is ok when the status is 'locked'. Otherwise, the status is 'notLocked'. Alternatively, if an error was detected at the input, the status indicates this error.
| ||||
| CprvtCESCICState | 1.3.6.1.4.1.738.1.5.111.1.6.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The state is set to 'active' if the input controller was selected by the clock to drive the clock output. At least one input out of the clock-input-controllers attached to a clock must be in an 'active' state at any given time
| ||||
| TprvtCESCICMappTable | 1.3.6.1.4.1.738.1.5.111.1.7 | NA | ||
table · not-accessible · current This table contains clock configuration and status monitoring information. | ||||
| RprvtCESCICMappEntry | 1.3.6.1.4.1.738.1.5.111.1.7.1 | NA | ||
row · not-accessible · current prvtCESCICMappEntry | ||||
| CprvtCESCICMappModuleId | 1.3.6.1.4.1.738.1.5.111.1.7.1.1 | Integer32 (1..255) | RO | |
column · Integer32 (1..255) · read-only · current Slot of CES module installed. | ||||
| CprvtCESCICMappClockNumber | 1.3.6.1.4.1.738.1.5.111.1.7.1.2 | Gauge32 | RO | |
column · Gauge32 · read-only · current Index for the conceptual row identifying a clock within this mapping table | ||||
| CprvtCESCICMappCICNumber | 1.3.6.1.4.1.738.1.5.111.1.7.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current Index for the conceptual row identifying a clock input within this mapping table | ||||
| CprvtCESCICMappState | 1.3.6.1.4.1.738.1.5.111.1.7.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The state is set to 'active' if the input controller was selected by the clock to drive the clock output. At least one input out of the clock-input-controllers attached to a clock must be in an 'active' state at any given time This value of this variable is equal to the prvtCESCICState variable in the CIC table
| ||||
| TprvtCESApsTable | 1.3.6.1.4.1.738.1.5.111.1.8 | NA | ||
table · not-accessible · current This table contains objects needed APS configuration | ||||
| RprvtCESApsEntry | 1.3.6.1.4.1.738.1.5.111.1.8.1 | NA | ||
| CprvtCESApsModuleId | 1.3.6.1.4.1.738.1.5.111.1.8.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current An integer uniquely identifying slot of the CES module installed | ||||
| CprvtCESApsEnable | 1.3.6.1.4.1.738.1.5.111.1.8.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/Disable Automatic Protection Switching
| ||||
| CprvtCESApsActiveLine | 1.3.6.1.4.1.738.1.5.111.1.8.1.3 | Integer32 (1..2) | RW | |
column · Integer32 (1..2) · read-write · current APS active line | ||||
| CprvtSdBerThreshold | 1.3.6.1.4.1.738.1.5.111.1.8.1.4 | Integer32 (5..9) | RW | |
column · Integer32 (5..9) · read-write · current The Signal Degrade Bit Error Rate. The negated value of this number is used as the exponent of 10 for computing the threshold value for the Bit Error Rate (BER). For example, a value of 5 indicates a BER threshold of 10^-5. | ||||
| CprvtSfBerThreshold | 1.3.6.1.4.1.738.1.5.111.1.8.1.5 | Integer32 (3..5) | RW | |
column · Integer32 (3..5) · read-write · current The Signal Failure Bit Error Rate. The negated value of this number is used as the exponent of 10 for computing the threshold value for the Bit Error Rate (BER). For example, a value of 5 indicates a BER threshold of 10^-5. | ||||
| TprvtCESUpdateFirmwareTable | 1.3.6.1.4.1.738.1.5.111.1.9 | NA | ||
table · not-accessible · current This table contains object needed in update firmware of CES module | ||||
| RprvtCESUpdateFirmwareEntry | 1.3.6.1.4.1.738.1.5.111.1.9.1 | NA | ||
| CprvtCESModuleId | 1.3.6.1.4.1.738.1.5.111.1.9.1.1 | Integer32 (1..32000) | NA | |
column · Integer32 (1..32000) · not-accessible · current An integer uniquely identifying slot of the CES module installed | ||||
| CprvtCESFirmwareImageName | 1.3.6.1.4.1.738.1.5.111.1.9.1.2 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current Name of the firmware image file | ||||
| CprvtCESUpdateAction | 1.3.6.1.4.1.738.1.5.111.1.9.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Update CES firmware
| ||||
| CprvtCESUpdateStatus | 1.3.6.1.4.1.738.1.5.111.1.9.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The status of the last update procedure, if any. This object will have a value of updateStatusUnknown(2) if no update process has been performed.
| ||||
| CprvtCESTFTPServer | 1.3.6.1.4.1.738.1.5.111.1.9.1.5 | IpAddress | RW | |
column · IpAddress · read-write · current IP Address of Tftp Server | ||||
| NprvtCESConformance | 1.3.6.1.4.1.738.1.5.111.2 | |||
| NprvtCESDsx1Compliances | 1.3.6.1.4.1.738.1.5.111.2.1 | |||
| MprvtCESDsx1Compliance | 1.3.6.1.4.1.738.1.5.111.2.1.1 | |||
compliance · current The compliance statement for management of TDM ports. | ||||
| NprvtCESDsx1Groups | 1.3.6.1.4.1.738.1.5.111.2.2 | |||
| GprvtCESDsx1NotificationsGroup | 1.3.6.1.4.1.738.1.5.111.2.2.1 | |||
| GprvtCESDsx1ROGroup | 1.3.6.1.4.1.738.1.5.111.2.2.2 | |||
group · current The group of objects with MAX-ACCESS read-write supported with read-only access for the first release. | ||||
Textual conventions
CESLineTypeINTEGERe1(1)e1-sdh(3)t1(2)t1-sdh(4)t1-sonet(5)This value is used to configure the line mode common for all TDM ports of the module.
ConfigActionINTEGERapplyConfiguration(2)noop(1)rejectConfiguration(3)restart(4)This value is used to specify what is to be done with unapplied CES module configuration.
E1ImpedanceINTEGERe1-120hrl(4)e1-120ohm(3)e1-75hrl(2)e1-75ohm(1)notApplicable(0)This value is used to configure E1 line type termination impedance.
ServiceClockINTEGERadaptive(3)differntial(4)localTiming(2)loopTiming(1)notAplicable(0)This values are used to configure transmit clock as one of this modes.
T1GainLimitINTEGERgain30(2)gain36(3)none(1)notApplicable(0)This value is used to configure T1 type Tx or Rx gain limit.
T1LongCableLengthINTEGERneg15dB(3)neg225dB(4)neg75dB(2)notApplicable(1)zerodB(5)This value is used to configure T1 long cable length.
Traps / Notifications
- prvtCESDsx1Alarm
1.3.6.1.4.1.738.1.5.111.0.1 - prvtCESModuleAvailable
1.3.6.1.4.1.738.1.5.111.0.2 - prvtCESModuleUnAvailableDueExtract
1.3.6.1.4.1.738.1.5.111.0.3 - prvtCESModuleUnAvailableDueReload
1.3.6.1.4.1.738.1.5.111.0.4