PRIV-LSL-MIB
B.A.T.M. Advance TechnologiesMIB module for management of Logical Service Loopback(LSL) Iometrix compatible product.
snmptranslate -m PRIV-LSL-MIB -Tpsnmpwalk -v2c -c <community> -m PRIV-LSL-MIB <host> 1.3.6.1.4.1.738.1.5.113Imports
| IF-MIB | ifIndex |
|---|---|
| PRVT-SWITCH-MIB | switch |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IprivLsl | 1.3.6.1.4.1.738.1.5.113 | |||
identity MIB module for management of Logical Service Loopback(LSL) Iometrix compatible product. | ||||
| NprivLslLevel1 | 1.3.6.1.4.1.738.1.5.113.1 | |||
| NprivLslObjects | 1.3.6.1.4.1.738.1.5.113.1.1 | |||
| SprivLslGlobalMacAddress | 1.3.6.1.4.1.738.1.5.113.1.1.1 | MacAddress | RW | |
scalar · MacAddress · read-write · current This object defines the destination mac address assigned to lsl packets. The device can recognise the lsl packets by a specific destination mac address given by this object. | ||||
| TprivLslManagementTable | 1.3.6.1.4.1.738.1.5.113.1.1.2 | NA | ||
table · not-accessible · current LSL interface extention table. This table contains all objects which are used for LSL management per interface. It uses ifIndex defined in rfc1213 | ||||
| RprivLslManagementEntry | 1.3.6.1.4.1.738.1.5.113.1.1.2.1 | NA | ||
| CprivLslStatus | 1.3.6.1.4.1.738.1.5.113.1.1.2.1.1 | PrivLslStates | RW | |
column · PrivLslStates · read-write · current This object indicates whether the port have Logical Service Loopback enabled or disabled. It allows the client to determine which interface should be used for this type of service | ||||
| TprivIometrixManagementTable | 1.3.6.1.4.1.738.1.5.113.1.1.3 | NA | ||
table · not-accessible · current Iometrix Level 1 table. This table contains all objects which are used for Iometrix level 1 management per interface. It uses ifIndex defined in rfc1213 | ||||
| RprivIometrixManagementEntry | 1.3.6.1.4.1.738.1.5.113.1.1.3.1 | NA | ||
| CprivIometrixStatus | 1.3.6.1.4.1.738.1.5.113.1.1.3.1.1 | PrivLslStates | RW | |
column · PrivLslStates · read-write · current This object indicates whether the port have Logical Service Loopback enabled or disabled. It allows the client to determine which interface should be used for this type of service | ||||
| NprivLslNotifications | 1.3.6.1.4.1.738.1.5.113.1.2 | |||
| NprivLslConformance | 1.3.6.1.4.1.738.1.5.113.1.3 | |||
| NprivLslGroups | 1.3.6.1.4.1.738.1.5.113.1.3.1 | |||
| GprivLevel1ObjectsGroup | 1.3.6.1.4.1.738.1.5.113.1.3.1.1 | |||
group · current All objects related to level1 logical loopback service. Object grouping will be extended if the mib is also extended | ||||
| NprivLslCompliances | 1.3.6.1.4.1.738.1.5.113.1.3.2 | |||
| MprivLevel1Compliance | 1.3.6.1.4.1.738.1.5.113.1.3.2.1 | |||
compliance · current The compliance statement. It will be extended if new functionality is added
| ||||
Textual conventions
PrivLslStatesINTEGERdisable(2)enable(1)The the switch on/off states for LSL on ports.