ChannelState INTEGERcontrol(3) data(5) disabled(1) failed(6) idle(2) traffic(4) unknown(0)
The state in which a channel is operating. Status types are Unknown (0), Disabled (1), Idle (2), Control (3), Traffic (4), Data (5) or Failed (6).
DipLineState INTEGERactive(3) failed(4) idle(2) unconfigured(1) unknown(0)
The state in which a DIP line is operating. Status types are Unknown (0), Unconfigured (1), Idle (2), Active (3) or Failed (4).
EventSeverity INTEGERmajor(2) minor(1) ok(0)
The severity of an event. Types are OK (0), Minor (1), or Major (2).
LicenseValidity INTEGERconflictingFeatures(8) corruptSignature(7) expired(6) fileNotFound(1) invalidExpiryDate(5) invalidHostId(2) invalidLicenseFormat(10) invalidProductCode(3) invalidTierMode(9) invalidVersion(4) valid(0)
The current validity of the license. Types are as follows:
Valid (0),
File Not Found (1),
Invalid Host ID (2),
Invalid Product Code(3),
Invalid Version (4),
Invalid Expiry Date (5),
Expired (6),
Corrupt Signature (7),
Conflicting Features (8),
Invalid Tier Mode (9),
Invalid License Format (10)
Mpt1327ChannelState INTEGERcontrol(3) failed(4) idle(1) traffic(2) unknown(0)
The state in which an MPT 1327 channel is operating. Status types are Unknown (0), Idle (1), Traffic (2), Control (3) or Failed (4).
Mpt1327LinkState INTEGERfailed(2) ok(1) unknown(0)
The state of the link to the MPT gateway. Status types are Unknown (0), OK (1) or Failed (2).
NetworkCheckState INTEGERfailed(2) notConfigured(0) ok(1)
The status of a network check. Status types are Not Configured (0), OK (1) or Failed (2).
NgwLinkState INTEGERfailed(2) ok(1) unknown(0)
The state of the link to the network gateway. Status types are Unknown (0), OK (1) or Failed (2).
NodeRequestedState INTEGERoffline(1) online(3) program(2) unknown(0)
The state that a node has been instructed to enter. Status types are: Unknown (0), Offline(1), Program (2), or Online (3).
NodeState INTEGERcontrol(4) offline(1) program(2) switching(3) unknown(0)
The state in which a node is operating. Status types are Unknown (0), Offline (1), Program (2), Switching (3) or Control (4).
RemoteNodeState INTEGERcontrol(4) failed(5) gracefulShutdown(6) offline(1) program(2) switching(3) unknown(0)
The state in which a remote node is operating. Status types are Unknown (0), Offline (1), Program (2), Switching (3), Control (4), Failed (5) or Graceful Shutdown (6).
RemoteNodeSyncState INTEGERfailed(1) none(3) ok(0) unknown(2)
The state of synchronisation between the control and a remote node. Types are OK (0), Failed (1), Unknown (2), or None (3).
SipCallSpeechVotingPriority INTEGERnormal(1) override(2) unknown(0)
The speech voting priority for SIP calls. Priority types are Unknown (0), Normal (1) or Override (2).
SipLineIncomingType INTEGERpabxi(2) pstni(1) unknown(0)
The ident of the A party in an incoming phone call. Ident types are Unknown (0), PSTNI (1) or PABXI (2).
SipLineRegistrationType INTEGERais(3) inbound(1) outbound(2) unknown(0)
The types of SIP line registration. Registration types are Unknown (0), Outbound (1), Inbound (2) or AIS (3).
SipLineState INTEGERdisabled(1) down(3) unknown(0) up(2)
The state in which a SIP line is operating. Status types are Unknown (0), Disabled (1), Up (2) or Down (3).
UnitAuthentication INTEGERbadAuthentication(4) badCrcReceived(5) busy(3) goodAuthenticationReceived(6) notHome(2) notPolled(0) notRegistered(8) polling(1) rejected(7)
The authentication state of a unit. Types are as follows:
Not Polled (0),
Polling (1),
Not Home (2),
Busy (3),
Bad Authentication (4),
Bad CRC Received (5),
Good Authentication Received (6),
Rejected (7),
Not Registered (8)
UnitStatusMessageId INTEGERclearAll(0) gpsSignalLost(2) gpsSignalRegainedAfterLoss(3) mcpConfigurationError(12) pppLinkToMpcDown(1) radioFrequencyOutOfLockServiceRegained(11) radioTemperatureT0NormalRange(6) radioTemperatureT1OverTemp(7) radioTemperatureT2OverTemp(8) radioTemperatureT3OverTemp(9) terminalAntennaConnectionFailureVswrOutOfRange(4) terminalAntennaConnectionGood(13) terminalGainedService(15) terminalLossOfService(10) terminalSupplyVoltageOutOfRange(5) terminalUnsolicitedReset(14) unknown(128)
Unit alarm status message IDs:
PPP link to MPC down (1),
GPS signal lost (2),
GPS signal regained (after loss) (3),
Unit antenna connection failure (VSWR out of range) (4),
Unit supply voltage out of range (5),
Unit temperature T0 (normal range) (6),
Unit temperature T1 (over temp) (7),
Unit temperature T2 (over temp) (8),
Unit temperature T3 (over temp) (9),
Unit loss of service (10),
Radio frequency out of lock (service regained) (11),
MCP configuration error (12),
Unit antenna connection good (13),
Unit unsolicited reset (14),
Unit gained service (15)