SUB10SYSTEMS-MIB
Sub10 Systems Ltd.Sub10 Systems MIB
snmptranslate -m SUB10SYSTEMS-MIB -Tpsnmpwalk -v2c -c <community> -m SUB10SYSTEMS-MIB <host> 1.3.6.1.4.1.39003Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Isub10Systems | 1.3.6.1.4.1.39003 | |||
identity Sub10 Systems MIB | ||||
| Nsub10Notifications | 1.3.6.1.4.1.39003.0 | |||
| !sub10UnitAlarm | 1.3.6.1.4.1.39003.0.1 | |||
notification · current A measured object relating the Unit subsystem has been raised or cleared according to the configured thresholds. For alarm configuration see sub10UnitMgmtAlarmTable. | ||||
| !sub10EthernetAlarm | 1.3.6.1.4.1.39003.0.2 | |||
notification · current A measured object relating the Ethernet subsystem has been raised or cleared according to the configured thresholds. For alarm configuration see sub10UnitMgmtAlarmTable. | ||||
| !sub10RadioAlarm | 1.3.6.1.4.1.39003.0.3 | |||
notification · current A measured object relating the Radio subsystem has been raised or cleared according to the configured thresholds. For alarm configuration see sub10UnitMgmtAlarmTable. | ||||
| Nsub10Unit | 1.3.6.1.4.1.39003.3 | |||
| Nsub10UnitStatus | 1.3.6.1.4.1.39003.3.1 | |||
| Nsub10UnitLocalStatus | 1.3.6.1.4.1.39003.3.1.1 | |||
| Ssub10UnitLclTime | 1.3.6.1.4.1.39003.3.1.1.1 | Sub10DateTime | RO | |
scalar · Sub10DateTime · read-only · current The local system time as a display string in the format:- YYYY-MM-DD,HH:MM:SS e.g. 2014-5-26,13:30:15 | ||||
| Ssub10UnitLclUnitType | 1.3.6.1.4.1.39003.3.1.1.2 | Sub10UnitType | RO | |
scalar · Sub10UnitType · read-only · current Uniquely identifies the local unit product type | ||||
| Ssub10UnitLclDescription | 1.3.6.1.4.1.39003.3.1.1.3 | DisplayString | RO | |
scalar · DisplayString · read-only · current The description of the local unit. This is synonymous with MIB-II sysDescr. | ||||
| Ssub10UnitLclHWSerialNumber | 1.3.6.1.4.1.39003.3.1.1.4 | OCTET STRING (SIZE (0..18)) | RO | |
scalar · OCTET STRING (SIZE (0..18)) · read-only · current The hardware serial number of the Local Unit. This also identifies whether the unit is a V-band or E-band product. See sub10UnitLclMWUType. | ||||
| Ssub10UnitLclTerminalName | 1.3.6.1.4.1.39003.3.1.1.5 | OCTET STRING (SIZE (0..63)) | RO | |
scalar · OCTET STRING (SIZE (0..63)) · read-only · current The administratively assigned name for the unit. This is synonymous with MIB-II sysName and can be administratively set via either sysName or sub10UnitMgmtTerminalName. | ||||
| Ssub10UnitLclTerminalType | 1.3.6.1.4.1.39003.3.1.1.6 | Sub10TerminalType | RO | |
scalar · Sub10TerminalType · read-only · current Uniquely identifies the local terminal type A or B. | ||||
| Ssub10UnitLclLinkName | 1.3.6.1.4.1.39003.3.1.1.7 | OCTET STRING (SIZE (0..63)) | RO | |
scalar · OCTET STRING (SIZE (0..63)) · read-only · current The administratively assigned name for the radio link between the local and remote units. This generally identifies geographically the two ends or a radio link within a site or location. This is synonymous with MIB-II sysLocation and can be administratively set via either sysLocation or sub10UnitMgmtLinkName. | ||||
| Ssub10UnitLclLinkId | 1.3.6.1.4.1.39003.3.1.1.8 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The administratively assigned identifier for the radio link between the local and remote units. The LinkId must be the same value on both local and remote units. | ||||
| Ssub10UnitLclSiteName | 1.3.6.1.4.1.39003.3.1.1.9 | DisplayString | RO | |
scalar · DisplayString · read-only · current The administratively assigned physical location of the local unit. | ||||
| Ssub10UnitLclFirmwareLoadedBank | 1.3.6.1.4.1.39003.3.1.1.10 | Sub10FirmwareBank | RO | |
scalar · Sub10FirmwareBank · read-only · current Currently loaded bank. The firmware version running in this bank is defined by sub10UnitLclFirmwareVersion. | ||||
| Ssub10UnitLclFirmwareVersion | 1.3.6.1.4.1.39003.3.1.1.11 | OCTET STRING (SIZE (0..15)) | RO | |
scalar · OCTET STRING (SIZE (0..15)) · read-only · current The firmware version currently running on the local unit. This is by definition the firmware loaded into the bank number defined in sub10UnitLclFirmwareLoadedBank. | ||||
| Ssub10UnitLclIpAddress | 1.3.6.1.4.1.39003.3.1.1.12 | OCTET STRING (SIZE (7..15)) | RO | |
scalar · OCTET STRING (SIZE (7..15)) · read-only · current The IP address of the local ethernet interface. | ||||
| Ssub10UnitLclMWUTemperature | 1.3.6.1.4.1.39003.3.1.1.13 | Integer32 (-100..100) | RO | |
scalar · Integer32 (-100..100) · read-only · current The modem temperature on the local unit in degrees celsius. | ||||
| Ssub10UnitLclNTPSyncStatus | 1.3.6.1.4.1.39003.3.1.1.14 | Sub10NTPSyncStatus | RO | |
scalar · Sub10NTPSyncStatus · read-only · current The indication that the systems clock is synchronised with the NTP server. | ||||
| Tsub10UnitLclAlarmStateTable | 1.3.6.1.4.1.39003.3.1.1.15 | NA | ||
table · not-accessible · current The table listing the each active alarm the local unit. An active alarm is where the alarm state is 'raised' at the specific severity level. The entries in the table correspond to the configured entries in sub10UnitMgmtAlarmTable. This table has a single entry per alarm where the index to the table is the same index as the associated Alarm configuration table sub10UnitMgmtAlarmTable. | ||||
| Rsub10UnitLclAlarmStateEntry | 1.3.6.1.4.1.39003.3.1.1.15.1 | NA | ||
row · not-accessible · current An entry (row) in the sub10UnitLclAlarmStateTable. | ||||
| Csub10UnitLclAlarmStateIndex | 1.3.6.1.4.1.39003.3.1.1.15.1.1 | Sub10AlarmIndex | NA | |
column · Sub10AlarmIndex · not-accessible · current The sub10UnitLclAlarmStateTable index. The index represents the same index as used in sub10UnitMgmtAlarmTable. The entries in the table correspond to the configured entries in sub10UnitMgmtAlarmTable. | ||||
| Csub10UnitLclAlarmState | 1.3.6.1.4.1.39003.3.1.1.15.1.2 | Sub10AlarmState | RO | |
column · Sub10AlarmState · read-only · current Internal object to indicate if this alarm is currently in the raised or cleared state. | ||||
| Csub10UnitLclAlarmStateTime | 1.3.6.1.4.1.39003.3.1.1.15.1.3 | Sub10DateTime | RO | |
column · Sub10DateTime · read-only · current The local date and time when the last Alarm State transition occurred. This object facilitates retrieving all instances of alarms that have been raised or have changed state since a given point in time. Implementations MUST include the offset from UTC, if available. Implementation in environments in which the UTC offset is not available is NOT RECOMMENDED. | ||||
| Ssub10UnitLclRadioDataRate | 1.3.6.1.4.1.39003.3.1.1.16 | Sub10RadioDataRate | RO | |
scalar · Sub10RadioDataRate · read-only · current The maximum data rate of the Airside interface. This has the same value as sub10RadioLclDataRate. | ||||
| Ssub10UnitLclMWUType | 1.3.6.1.4.1.39003.3.1.1.17 | Sub10MWUType | RO | |
scalar · Sub10MWUType · read-only · current The local MWU type | ||||
| Ssub10UnitLclFPGAVersion | 1.3.6.1.4.1.39003.3.1.1.18 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The FPGA Version. | ||||
| Nsub10UnitRemoteStatus | 1.3.6.1.4.1.39003.3.1.2 | |||
| Ssub10UnitRmtUnitType | 1.3.6.1.4.1.39003.3.1.2.1 | Sub10UnitType | RO | |
scalar · Sub10UnitType · read-only · current Uniquely identifies the remote unit product type | ||||
| Ssub10UnitRmtTime | 1.3.6.1.4.1.39003.3.1.2.2 | Sub10DateTime | RO | |
scalar · Sub10DateTime · read-only · current The remote unit local system time as a display string in the format:- YYYY-MM-DD,HH:MM:SS e.g. 2014-5-26,13:30:15 | ||||
| Ssub10UnitRmtTerminalName | 1.3.6.1.4.1.39003.3.1.2.3 | OCTET STRING (SIZE (0..63)) | RO | |
scalar · OCTET STRING (SIZE (0..63)) · read-only · current The administratively assigned name for the remote unit. This is synonymous with MIB-II sysName. | ||||
| Ssub10UnitRmtTerminalType | 1.3.6.1.4.1.39003.3.1.2.4 | Sub10TerminalType | RO | |
scalar · Sub10TerminalType · read-only · current Uniquely identifies the remote terminal type A or B. | ||||
| Ssub10UnitRmtLinkName | 1.3.6.1.4.1.39003.3.1.2.5 | OCTET STRING (SIZE (0..63)) | RO | |
scalar · OCTET STRING (SIZE (0..63)) · read-only · current The administratively assigned name on the remote unit for the radio link between the local and remote units. This generally identifies geographically the two ends or a radio link within a site or location. | ||||
| Ssub10UnitRmtLinkId | 1.3.6.1.4.1.39003.3.1.2.6 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The administratively assigned identifier on the remote unit for the radio link between the local and remote units. The LinkId must be the same value on both local and remote units. | ||||
| Ssub10UnitRmtHWSerialNumber | 1.3.6.1.4.1.39003.3.1.2.7 | OCTET STRING (SIZE (0..18)) | RO | |
scalar · OCTET STRING (SIZE (0..18)) · read-only · current The hardware serial number of the Remote Unit. This also identifies whether the unit is a V-band or E-band product. | ||||
| Ssub10UnitRmtFirmwareVersion | 1.3.6.1.4.1.39003.3.1.2.8 | OCTET STRING (SIZE (0..15)) | RO | |
scalar · OCTET STRING (SIZE (0..15)) · read-only · current The firmware version currently running on the remote unit. This is by definition the firmware loaded into the bank currently used for boot. See sub10UnitMgmtFirmware. | ||||
| Ssub10UnitRmtIpAddress | 1.3.6.1.4.1.39003.3.1.2.9 | OCTET STRING (SIZE (7..15)) | RO | |
scalar · OCTET STRING (SIZE (7..15)) · read-only · current The IP address of the remote ethernet interface. | ||||
| Ssub10UnitRmtMWUTemperature | 1.3.6.1.4.1.39003.3.1.2.10 | Integer32 (-100..100) | RO | |
scalar · Integer32 (-100..100) · read-only · current The modem temperature on the local unit in degrees celsius. | ||||
| Nsub10UnitMgmt | 1.3.6.1.4.1.39003.3.2 | |||
| Nsub10UnitMgmtSystem | 1.3.6.1.4.1.39003.3.2.1 | |||
| Ssub10UnitMgmtTerminalName | 1.3.6.1.4.1.39003.3.2.1.1 | OCTET STRING (SIZE (0..63)) | RW | |
scalar · OCTET STRING (SIZE (0..63)) · read-write · current The administratively assigned name for the unit. This is synonymous with MIB-II sysName and sub10UnitLocalStatus sub10UnitLclTerminalName. | ||||
| Ssub10UnitMgmtLinkName | 1.3.6.1.4.1.39003.3.2.1.2 | OCTET STRING (SIZE (0..63)) | RW | |
scalar · OCTET STRING (SIZE (0..63)) · read-write · current The administratively assigned name for the radio link between the local and remote units. This generally identifies geographically the two ends or a radio link within a site or location. This is synonymous with sub10UnitLocalStatus sub10UnitLclLinkName | ||||
| Ssub10UnitMgmtLinkId | 1.3.6.1.4.1.39003.3.2.1.3 | OCTET STRING (SIZE (0..32)) | RW | |
scalar · OCTET STRING (SIZE (0..32)) · read-write · current The administratively assigned identifier for the radio link between the local and remote units. The LinkId must be the same value on both local and remote units. This is synonymous with sub10UnitLocalStatus sub10UnitLclLinkId. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2). | ||||
| Ssub10UnitMgmtSiteName | 1.3.6.1.4.1.39003.3.2.1.4 | DisplayString | RW | |
scalar · DisplayString · read-write · current The administratively assigned physical location of the unit. This is synonymous with MIB-II sysLocation and sub10UnitLocalStatus sub10UnitLclSiteName. | ||||
| Ssub10UnitMgmtContactName | 1.3.6.1.4.1.39003.3.2.1.5 | DisplayString | RW | |
scalar · DisplayString · read-write · current The administratively assigned contact for support of the unit. This is synonymous with MIB-II sysContact and sub10UnitLocalStatus sub10UnitLclContactName. | ||||
| Nsub10UnitMgmtIp | 1.3.6.1.4.1.39003.3.2.2 | |||
| Ssub10UnitMgmtIpMode | 1.3.6.1.4.1.39003.3.2.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current IP Address configuration is either manually set as ipv4 or ipv6 type addreessing or alternatively can be dynamically assigned automatically using the Dynamic Host Control Protocol (DHCP). IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).
| ||||
| Ssub10UnitMgmtIpAddress | 1.3.6.1.4.1.39003.3.2.2.2 | OCTET STRING (SIZE (7..15)) | RW | |
scalar · OCTET STRING (SIZE (7..15)) · read-write · current The administratively assigned IP Address for the management channel. This is reflected in the MIB-II ipAddrTable. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2). | ||||
| Ssub10UnitMgmtIpSubnetMask | 1.3.6.1.4.1.39003.3.2.2.3 | OCTET STRING (SIZE (7..15)) | RW | |
scalar · OCTET STRING (SIZE (7..15)) · read-write · current The administratively assigned sub-net mask for the management channel. This is reflected in the MIB-II ipAddrTable. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2). | ||||
| Ssub10UnitMgmtIpDefGateway | 1.3.6.1.4.1.39003.3.2.2.4 | OCTET STRING (SIZE (7..15)) | RW | |
scalar · OCTET STRING (SIZE (7..15)) · read-write · current The administratively assigned default gateway for the management channel. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2). | ||||
| Ssub10UnitMgmtIpDHCP | 1.3.6.1.4.1.39003.3.2.2.5 | Sub10State | RW | |
scalar · Sub10State · read-write · current Dynamic Host Control Protocol (DHCP) is enabled or disabled. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2). | ||||
| Nsub10UnitMgmtVlan | 1.3.6.1.4.1.39003.3.2.3 | |||
| Ssub10UnitMgmtVlanState | 1.3.6.1.4.1.39003.3.2.3.1 | Sub10State | RW | |
scalar · Sub10State · read-write · current Enable VLAN for Management traffic. . | ||||
| Ssub10UnitMgmtVlanId | 1.3.6.1.4.1.39003.3.2.3.2 | Sub10VlanId | RW | |
scalar · Sub10VlanId · read-write · current The VLAN Id used to carry management traffic. Only valid when the object is set to a non-zero value. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2). | ||||
| Ssub10UnitMgmtVlanPriority | 1.3.6.1.4.1.39003.3.2.3.3 | Unsigned32 (0..7) | RW | |
scalar · Unsigned32 (0..7) · read-write · current The VLAN priority inserted into the ethernet frame for all management traffic. Only valid when the object sub10UnitMgmtVlanId is set to non zero. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2). | ||||
| Ssub10UnitMgmtVlanDSCP | 1.3.6.1.4.1.39003.3.2.3.4 | Unsigned32 (0..63) | RW | |
scalar · Unsigned32 (0..63) · read-write · current The Differentiated Services Code Point priority inserted into the IP header of all management traffic. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2). | ||||
| Ssub10UnitMgmtVlanDEI | 1.3.6.1.4.1.39003.3.2.3.5 | Sub10State | RW | |
scalar · Sub10State · read-write · current Set the Drop Eligible Indicator inserted into the ethernet frame for all management traffic. Only valid when the object sub10UnitMgmtVlanId is set to non zero. The DEI bit is set into the tag control information (TCI) field of each management frame. The DEI is a 1 bit field immediately following the PCP bits (3 bit field) IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2). | ||||
| Nsub10UnitMgmtUsers | 1.3.6.1.4.1.39003.3.2.4 | |||
| Ssub10UnitMgmtUsersNumber | 1.3.6.1.4.1.39003.3.2.4.1 | Unsigned32 (1..10) | RO | |
scalar · Unsigned32 (1..10) · read-only · current The number of valid sub10UnitMgmtUsersTable table entries present on this system. | ||||
| Tsub10UnitMgmtUserTable | 1.3.6.1.4.1.39003.3.2.4.2 | NA | ||
table · not-accessible · current The table listing the users configured on the unit. The number of user entries is sub10UnitMgmtUsersNumber. This table is indexed by user name (sub10UnitMgmtUserName). Multiple entries with the same sub10UnitMgmtUserName are not possible. NB. As part of SNMPv3 support this table will be superceded by 'usmUserTable'. | ||||
| Rsub10UnitMgmtUserEntry | 1.3.6.1.4.1.39003.3.2.4.2.1 | NA | ||
row · not-accessible · current An entry (row) in the sub10UnitMgmtUserTable. If the rowStatus is set to notInService(2) then the entry is not valid and no columnar objects are returned. Usage is as follows: active(1) - Entry is created and in use. Any attempt to set this value will first check for consistent objects. If objects are found to be inconsistent then the entry will not be created and an error will be returned. notInService(2) - Entry is not created and not in use. Any attempt to set this value will result in the the entry remaining created but not accessible and not used. notReady(3) - Entry is created but has inconsistent objects, these must be set to correct values before the object can be set to active(1). createAndGo(4) - Set this to create a new entry and attempt to make the entry active(1). If the entry has inconsistent objects then this will set the entry to notReady(3) and an error will be returned. createAndWait(5)- Set this to create a new entry. This will set rowStatus = notReady(3). Related objects can then be set to consistent values before row_status can be set to active(1). destroy(6) - Set this to delete an entry. | ||||
| Csub10UnitMgmtUserIndex | 1.3.6.1.4.1.39003.3.2.4.2.1.1 | Unsigned32 (1..16) | NA | |
column · Unsigned32 (1..16) · not-accessible · current The sub10UnitMgmtUserTable index. | ||||
| Csub10UnitMgmtUserRowStatus | 1.3.6.1.4.1.39003.3.2.4.2.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or notInService(2) which indicates that the row is operationally in use or not. The default value is notInService(2) meaning the entry is not used by default. To make the entry valid this object must be set to enabled(1), createAndGo(4) or createAndWait(5). To delete the row set this to destroy(6). | ||||
| Csub10UnitMgmtUserName | 1.3.6.1.4.1.39003.3.2.4.2.1.3 | OCTET STRING (SIZE (1..32)) | RW | |
column · OCTET STRING (SIZE (1..32)) · read-write · current The unique user name provided by the system administrator. | ||||
| Csub10UnitMgmtUserGroup | 1.3.6.1.4.1.39003.3.2.4.2.1.4 | Sub10UserGroup | RW | |
column · Sub10UserGroup · read-write · current The user group provided by the system administrator. This restricts a user to certain key functions on the web GUI. | ||||
| Csub10UnitMgmtUserPassword | 1.3.6.1.4.1.39003.3.2.4.2.1.5 | OCTET STRING (SIZE (6..32)) | RW | |
column · OCTET STRING (SIZE (6..32)) · read-write · current The unique user password provided by the system administrator. This object can be set but is not visible when read. | ||||
| Csub10UnitMgmtUserPasswordVerify | 1.3.6.1.4.1.39003.3.2.4.2.1.6 | OCTET STRING (SIZE (6..32)) | RW | |
column · OCTET STRING (SIZE (6..32)) · read-write · current The unique user password provided by the system administrator use to verify the setting of sub10UnitMgmtUserPassword. This object can be set but is not visible when read. | ||||
| Nsub10UnitMgmtTime | 1.3.6.1.4.1.39003.3.2.5 | |||
| Ssub10UnitMgmtTimeLocal | 1.3.6.1.4.1.39003.3.2.5.1 | Sub10DateTime | RW | |
scalar · Sub10DateTime · read-write · current The administratively assigned system time defined as a display string in the format:- YYYY-MM-DD HH:MM:SS e.g. 2014-05-26 13:30:15 | ||||
| Ssub10UnitMgmtTimeNTPEnabled | 1.3.6.1.4.1.39003.3.2.5.2 | Sub10State | RW | |
scalar · Sub10State · read-write · current The administratively assigned state to enable or disable NTP. system cloack assignment automatically using the Network Time Protocol (NTP). | ||||
| Ssub10UnitMgmtTimeNTPServer1 | 1.3.6.1.4.1.39003.3.2.5.3 | OCTET STRING (SIZE (1..127)) | RW | |
scalar · OCTET STRING (SIZE (1..127)) · read-write · current The administratively assigned primary NTP Server name. | ||||
| Ssub10UnitMgmtTimeNTPServer2 | 1.3.6.1.4.1.39003.3.2.5.4 | OCTET STRING (SIZE (1..127)) | RW | |
scalar · OCTET STRING (SIZE (1..127)) · read-write · current The administratively assigned secondary NTP Server name to be used when the primary server is not responding. | ||||
| Ssub10UnitMgmtTimeNTPPort | 1.3.6.1.4.1.39003.3.2.5.5 | Unsigned32 (1..65535) | RW | |
scalar · Unsigned32 (1..65535) · read-write · current The administratively assigned NTP Port number name to be used when contacting the NTP server. | ||||
| Ssub10UnitMgmtTimeNTPSyncStatus | 1.3.6.1.4.1.39003.3.2.5.6 | Sub10NTPSyncStatus | RO | |
scalar · Sub10NTPSyncStatus · read-only · current The indication that the systems clock is synchronised with the NTP server. | ||||
| Ssub10UnitMgmtDateTime | 1.3.6.1.4.1.39003.3.2.5.7 | DateAndTime | RW | |
scalar · DateAndTime · read-write · current The administratively assigned system defined as a standard date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. | ||||
| Nsub10UnitMgmtAlarms | 1.3.6.1.4.1.39003.3.2.6 | |||
| Tsub10UnitMgmtAlarmTable | 1.3.6.1.4.1.39003.3.2.6.1 | NA | ||
table · not-accessible · current The sub10UnitMgmtAlarmTable defines the alarm configuration. The first 'N' rows of the table is reserved for fixed alarms defined by the manufacturer. Fixed alarms cannot be deleted or their names changed, other attributes of a fixed alarm may be modified. The remainder of rows are available for user defined alarms which can be created and deleted. The index value 'N' is defined by 'sub10UnitMgmtAlarmsUserDefStart'. Any attempt to create or delete a row in the table with an index less than value of 'sub10UnitMgmtAlarmsUserDefStart' will be rejected. This table is indexed by alarm index a number ranging from 1 to the maximum number of entries in the alarm table. User defined alarm name and and alarm severity are configurable allowing multiple entries for the same alarm to be raised at different severity levels according to different threshold levels. A user defined alarm can be created with the same name as a fixed alarm if required. For example the fixed alarm 'Rx Power Low' monitors the radio receive power and raises an alarm if the value is less than a certain threshold. A user defined alarm may be created with the same name but a less stringent threshold and a lower seveirty level. This allows same alarms to be raised at increasing severity as the condition causing the alarm worsens. This table allows configuration of threshold passing behavior, threshold values for both raising and clearing the alarms and the perceived severity. The alarm forwarding mechanisms can be defined for example SNMP trap, syslog and SMTP. No validation of thresholds across different entries of the table therefore the administrator must ensure that thresholds are correctly set accordingly for the severity of each alarm. This is particularly important where a single alarm name is configured to be raised at different severity levels. | ||||
| Rsub10UnitMgmtAlarmEntry | 1.3.6.1.4.1.39003.3.2.6.1.1 | NA | ||
row · not-accessible · current An entry (row) in the sub10UnitMgmtAlarmTable. If the rowStatus is set to notInService(2) then the entry is not valid and no columnar objects are returned. | ||||
| Csub10UnitMgmtAlarmIndex | 1.3.6.1.4.1.39003.3.2.6.1.1.1 | Sub10AlarmIndex | NA | |
column · Sub10AlarmIndex · not-accessible · current The sub10UnitMgmtAlarmTable index. | ||||
| Csub10UnitMgmtAlarmRowStatus | 1.3.6.1.4.1.39003.3.2.6.1.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or notInService(2) which indicates that the row is operationally in use or not. The default value is notInService(2) meaning the entry is not used by default. To make the entry valid this object must be set to enabled(1), createAndGo(4) or createAndWait(5). To delete the row set this to destroy(6). | ||||
| Csub10UnitMgmtAlarmName | 1.3.6.1.4.1.39003.3.2.6.1.1.3 | Sub10AlarmName | RW | |
column · Sub10AlarmName · read-write · current The alarm name. This is a short descriptive name for the alarm.
Alarm names can be duplicated across entries in order to define
the same alarm to be raised and cleared according to different
thresholds and different severity levels. If the user defines mutiple alarms
with the same name it important to correctly configure severity and
thresholds to avoid multiple alarms being generated for the same condition.
Fixed alarm names cannot be modified. Fixed alarms are populated
automatically in rows 1 to ('sub10UnitMgmtAlarmsUserDefStart'-1) | ||||
| Csub10UnitMgmtAlarmSeverity | 1.3.6.1.4.1.39003.3.2.6.1.1.4 | Sub10AlarmSeverity | RW | |
column · Sub10AlarmSeverity · read-write · current The alarm severity. This is added to each alarm as a parameter. | ||||
| Csub10UnitMgmtAlarmMeasObject | 1.3.6.1.4.1.39003.3.2.6.1.1.5 | Sub10MeasuredObject | RW | |
column · Sub10MeasuredObject · read-write · current The measured object. This is the object name of the object in the MIB with which the alarm is associated and which the configured thresholds are compared with when deriving the state of the alarm. It is not neccessary for all alarm measurement values to be identified in the MIB since a single alarm may be dependant on checks against entities or objects which are not present in the MIB and therefore do not have an associated OID. In general where an alarm and its thresholds relate to the monitoring of the value of a single MIB object then the OID of that object will be defined here otherwise the value is set to empty string. | ||||
| Csub10UnitMgmtAlarmMonitorIntvl | 1.3.6.1.4.1.39003.3.2.6.1.1.6 | Unsigned32 (1..86400) | RW | |
column · Unsigned32 (1..86400) · read-write · current The interval in seconds when the measured object is to be read and compared with the raise and clear thresholds. An alarm cannot be raised or cleared quicker than the configured interval. Please also see related sub10UnitMgmtAlarmRaiseIntvls and sub10UnitMgmtAlarmClearIntvls objects which also affect when alarms are raised and cleared. This object should be set appropriately for the measured object to be monitored (see sub10UnitMgmtAlarmRaiseMeasObject) and the resulting alarm to be raised and cleared (see sub10UnitMgmtAlarmName). This also affects the forwarding of alarms for example as SNMP notifications. Higher severity alarms may have a shorter interval than those at a lower severity. The correct setting of sub10UnitMgmtAlarmMonitorIntvl and related objects sub10UnitMgmtAlarmRaiseIntvls and sub10UnitMgmtAlarmClearIntvls are important to avoid potential network loading caused by alarm storms. | ||||
| Csub10UnitMgmtAlarmRaiseOper | 1.3.6.1.4.1.39003.3.2.6.1.1.7 | Sub10AlarmOperation | RW | |
column · Sub10AlarmOperation · read-write · current Type of operation which determines when an alarm is to be raised. Definition of each type is as follows: lt - Measured objects value is less than raise threshold gt - Measured objects value is greater than raise threshold le - Measured objects value is less than or equal to raise threshold ge - Measured objects value is greater than or equal to raise threshold eq - Measured objects value is equal to raise threshold neq - Measured objects value is not equal to raise threshold The alarm operation defines how to apply the configured thresholds when raising the alarm. This defines whether the alarm is raised when the measured object value crosses the threshold from low to high or from high to low or if the measured value hits a certain value or not. Example: Alarm Name Alarm Threshold Raise Operation High Temperature 70 gt Low Temperature -30 le High Temperature Alarm is raised when the measured temperature is above 70 and Low Temperature raised when the measured temperature is lower than or equal to -30. | ||||
| Csub10UnitMgmtAlarmRaiseThresh | 1.3.6.1.4.1.39003.3.2.6.1.1.8 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current The threshold value which the measured object's value crosses causes the alarm to be raised. The behaviour of a measured value and alarm threshold comparison is defined by the object sub10UnitMgmtAlarmThreshType. | ||||
| Csub10UnitMgmtAlarmClearOper | 1.3.6.1.4.1.39003.3.2.6.1.1.9 | Sub10AlarmOperation | RW | |
column · Sub10AlarmOperation · read-write · current Type of operation which determines when an alarm is to be cleared. Definition of each type is as follows: lt - Measured objects value is less than clear threshold gt - Measured objects value is greater than clear threshold le - Measured objects value is less than or equal to clear threshold ge - Measured objects value is greater than or equal to clear threshold eq - Measured objects value is equal to clear threshold neq - Measured objects value is not equal to clear threshold The alarm operation defines how to apply the configured thresholds when clearing the alarm. This defines whether the alarm is cleared when the measured object value crosses the threshold from low to high or from high to low or if the measured value hits a certain value or not. Example: Alarm Name Alarm Threshold Clear Operation High Temperature 60 le Low Temperature -30 gt Low Temperature Alarm is cleared when the measured temperature is lower or equal to 60 and Low Temperature cleared when the measured temperature is greater than -30. | ||||
| Csub10UnitMgmtAlarmClearThresh | 1.3.6.1.4.1.39003.3.2.6.1.1.10 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current The threshold value which the measured object's value crosses causes the alarm to be cleared. The behaviour of a measured value and alarm threshold comparison is defined by the object sub10UnitMgmtAlarmThreshType. The sub10UnitMgmtAlarmClearThresh value may be different to the sub10UnitMgmtAlarmRaiseThresh allowing some hysteresis bewteen raising and clearing of alarms thus avoiding an alarm being continually raised and cleared if the measured value is changing frequently around the threshold. If different raise and clear thresholds are not required then the sub10UnitMgmtAlarmClearThresh and sub10UnitMgmtAlarmRaiseThresh should be set to the same value. | ||||
| Csub10UnitMgmtAlarmRaiseIntvls | 1.3.6.1.4.1.39003.3.2.6.1.1.11 | Unsigned32 (0..255) | RW | |
column · Unsigned32 (0..255) · read-write · current The number of continuous monitoring intervals (see sub10UnitMgmtAlarmMonitorIntvl) where the measured object has crossed the raise threshold before the alarm state is set to raised. This is intended to reduce the number of alarm state transitions when the measured object value is rapidly changing close to the configured raise threshold. | ||||
| Csub10UnitMgmtAlarmClearIntvls | 1.3.6.1.4.1.39003.3.2.6.1.1.12 | Unsigned32 (0..255) | RW | |
column · Unsigned32 (0..255) · read-write · current The number of continuous monitoring intervals (see sub10UnitMgmtAlarmMonitorIntvl) where the measured object has crossed the clear threshold before the alarm state is set to cleared. This is intended to reduce the number of alarm state transitions when the measured object value is rapidly changing close to the configured clear threshold. | ||||
| Csub10UnitMgmtAlarmType | 1.3.6.1.4.1.39003.3.2.6.1.1.13 | Sub10AlarmType | RW | |
column · Sub10AlarmType · read-write · current The type of the alarm and defines the type of notification (trap) used to inform management entities. | ||||
| Csub10UnitMgmtAlarmSmtpAddress | 1.3.6.1.4.1.39003.3.2.6.1.1.14 | OCTET STRING (SIZE (0..63)) | RW | |
column · OCTET STRING (SIZE (0..63)) · read-write · current The smtp mail address. If set the alarm is suitable formatted and sent to the given mail address. | ||||
| Csub10UnitMgmtAlarmToSyslog | 1.3.6.1.4.1.39003.3.2.6.1.1.15 | Sub10State | RW | |
column · Sub10State · read-write · current If set to 'enabled' the alarm is suitably formatted and sent to syslog. | ||||
| Csub10UnitMgmtAlarmEnabled | 1.3.6.1.4.1.39003.3.2.6.1.1.16 | Sub10State | RW | |
column · Sub10State · read-write · current If set to 'enabled' the alarm is enabled. | ||||
| Csub10UnitMgmtAlarmMeasObjectVal | 1.3.6.1.4.1.39003.3.2.6.1.1.17 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The value of sub10UnitMgmtAlarmMeasObject formatted as a displayString which when measured by the alarm subsystem caused an alarm to be either raised or cleared. This is therefore the value of the object which was compared with and found to have crossed the configured threshold causing the alarm to change state. The value is not the current value of the measured object it is the observed value which caused the change in alarm state. | ||||
| Csub10UnitMgmtAlarmToSNMP | 1.3.6.1.4.1.39003.3.2.6.1.1.18 | Sub10State | RW | |
column · Sub10State · read-write · current If set to 'enabled' the alarm is forwarded as an SNMP notification / trap. | ||||
| Csub10UnitMgmtAlarmMeasObjIndex | 1.3.6.1.4.1.39003.3.2.6.1.1.19 | Unsigned32 (0..255) | RW | |
column · Unsigned32 (0..255) · read-write · current The measured object's index which is a value from 1 and is the instance of the measured object to be monitored. For scalar objects this value is 0 and for non-scalar (or column) objects this value must be 0 or greater and must match the index value defined for the object where the object is defined as a column in a table and the table has an index defined in a certain range. | ||||
| Ssub10UnitMgmtAlarmsUserDefStart | 1.3.6.1.4.1.39003.3.2.6.2 | Sub10AlarmIndex | RO | |
scalar · Sub10AlarmIndex · read-only · current This defines the row index from which point rows in the sub10UnitMgmtAlarmTable can be created and deleted and therefore where user defined alarms start. Any attempt to create or delete a row in the sub10UnitMgmtAlarmTable with an index below this value will fail. | ||||
| Nsub10UnitMgmtSnmp | 1.3.6.1.4.1.39003.3.2.7 | |||
| Ssub10UnitMgmtSnmpAgent | 1.3.6.1.4.1.39003.3.2.7.1 | Sub10State | RW | |
scalar · Sub10State · read-write · current If set to 'enabled' the agent will respond to valid v1/2c SNMP requests for GET/SET/GET-NEXT of supported MIB objects. If this object and the object sub10UnitMgmtSnmpv3 are both set to disabled then the unit will no longer respond to SNMP requests. If this object is set to enabled and sub10UnitMgmtSnmpv3 is set to enabled then the agent will respond to both both v1/2c and v3 SNMP requests. !! IMPORTANT !! If this object and sub10UnitMgmtSnmpv3 is set to disabled then the Agent will no longer respond therefore it will not be possible to re-enable the agent using SNMP. The agent can be re-enabled using the web GUI only. If this object is disabled then traps will not be forwarded by the unit. | ||||
| Ssub10UnitMgmtSnmpTraps | 1.3.6.1.4.1.39003.3.2.7.2 | Sub10State | RW | |
scalar · Sub10State · read-write · current If set to 'enabled' the agent will forward traps to all configured trap destinations. If disabled traps are discarded. Traps are not sent if sub10UnitMgmtSnmpAgent is 'disabled(2)' regardless of the setting of this object. | ||||
| Ssub10UnitMgmtSnmpv320Mib | 1.3.6.1.4.1.39003.3.2.7.3 | Sub10State | RW | |
scalar · Sub10State · read-write · current If set to 'enabled' the agent will support the Sub10 Systems v320 legacy MIB (LIBERATOR-MIB) objects and traps. | ||||
| Ssub10UnitMgmtSnmpv3 | 1.3.6.1.4.1.39003.3.2.7.4 | Sub10State | RW | |
scalar · Sub10State · read-write · current If set to 'enabled' the agent will support SNMPv3 PDUs and the SNMPv3 MIB configuration. This can be set to enabled or disabled independently of the object sub10UnitMgmtSnmpAgent which enables or disables the v1/2c agent. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2). | ||||
| Tsub10UnitMgmtSnmpTrpDstTable | 1.3.6.1.4.1.39003.3.2.7.5 | NA | ||
table · not-accessible · current The table listing the each trap destination the local unit. Each trap destination has an IpAddress and a trap community string | ||||
| Rsub10UnitMgmtSnmpTrpDstEntry | 1.3.6.1.4.1.39003.3.2.7.5.1 | NA | ||
row · not-accessible · current An entry (row) in the sub10UnitMgmtSnmpTrpDstTable. If the rowStatus is set to notInService(2) then the entry is not valid and no columnar objects are returned. | ||||
| Csub10UnitMgmtSnmpTrpDstIndex | 1.3.6.1.4.1.39003.3.2.7.5.1.1 | Unsigned32 (1..3) | NA | |
column · Unsigned32 (1..3) · not-accessible · current The sub10UnitMgmtSnmpTrpDstTable index. If the rowStatus is not set to enabled(1) then the entry is not valid and no columnar objects are returned except for the rowStatus object itself. | ||||
| Csub10UnitMgmtSnmpTrpDstRowStatus | 1.3.6.1.4.1.39003.3.2.7.5.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or notInService(2) which indicates that the row is operationally in use or not. The default value is notInService(2) meaning the entry is not used by default. To make the entry valid this object must be set to enabled(1), createAndGo(4) or createAndWait(5). To delete the row set this to destroy(6). | ||||
| Csub10UnitMgmtSnmpTrpDstIpAddr | 1.3.6.1.4.1.39003.3.2.7.5.1.3 | OCTET STRING (SIZE (0..15)) | RW | |
column · OCTET STRING (SIZE (0..15)) · read-write · current The administratively assigned SNMP Trap Destination IP. | ||||
| Csub10UnitMgmtSnmpTrpDstCommunity | 1.3.6.1.4.1.39003.3.2.7.5.1.4 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current The trap community name sent with each trap to this trap destination. The trap community allows for some security in the target management terminal | ||||
| Ssub10UnitMgmtSnmpEngineIdFormat | 1.3.6.1.4.1.39003.3.2.7.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current The format of this SNMP v3 agent's engine id. The engine id is administratively defined and is between 5 and 32 characters long and can be based on a number of formats defined here.
| ||||
| Ssub10UnitMgmtSnmpEngineIdText | 1.3.6.1.4.1.39003.3.2.7.7 | OCTET STRING (SIZE (0..25)) | RW | |
scalar · OCTET STRING (SIZE (0..25)) · read-write · current When sub10UnitMgmtSnmpEngineIdFormat='textString(4)' this object contains the administratively defined string used to build the SNMP v3 engine id in sub10UnitMgmtSnmpEngineId. | ||||
| Ssub10UnitMgmtSnmpEngineId | 1.3.6.1.4.1.39003.3.2.7.8 | OCTET STRING (SIZE (5..32)) | RO | |
scalar · OCTET STRING (SIZE (5..32)) · read-only · current The administratively assigned SNMP v3 engine id. The construction of the engine id is dependant on the setting of sub10UnitMgmtSnmpEngineIdFormat and must be unique to the unit. | ||||
| Ssub10UnitMgmtSnmpOperAuthProto | 1.3.6.1.4.1.39003.3.2.7.9 | Sub10Snmpv3AuthProtocol | RW | |
scalar · Sub10Snmpv3AuthProtocol · read-write · current The authentication protocol currently assigned to users of group type operation. | ||||
| Ssub10UnitMgmtSnmpOperPrivProto | 1.3.6.1.4.1.39003.3.2.7.10 | Sub10Snmpv3PrivProtocol | RW | |
scalar · Sub10Snmpv3PrivProtocol · read-write · current The privacy protocol currently assigned to users of group type operation. | ||||
| Ssub10UnitMgmtSnmpAdminAuthProto | 1.3.6.1.4.1.39003.3.2.7.11 | Sub10Snmpv3AuthProtocol | RW | |
scalar · Sub10Snmpv3AuthProtocol · read-write · current The authentication protocol currently assigned to users of group type administration. | ||||
| Ssub10UnitMgmtSnmpAdminPrivProto | 1.3.6.1.4.1.39003.3.2.7.12 | Sub10Snmpv3PrivProtocol | RW | |
scalar · Sub10Snmpv3PrivProtocol · read-write · current The privacy protocol currently assigned to users of group type administration. | ||||
| Ssub10UnitMgmtSnmpMaintAuthProto | 1.3.6.1.4.1.39003.3.2.7.13 | Sub10Snmpv3AuthProtocol | RW | |
scalar · Sub10Snmpv3AuthProtocol · read-write · current The authentication protocol currently assigned to users of group type maintenance. | ||||
| Ssub10UnitMgmtSnmpMaintPrivProto | 1.3.6.1.4.1.39003.3.2.7.14 | Sub10Snmpv3PrivProtocol | RW | |
scalar · Sub10Snmpv3PrivProtocol · read-write · current The privacy protocol currently assigned to users of group type maintenance. | ||||
| Tsub10UnitMgmtSnmpUserTable | 1.3.6.1.4.1.39003.3.2.7.15 | NA | ||
table · not-accessible · current The table of SNMPv3 User configuration. | ||||
| Rsub10UnitMgmtSnmpUserEntry | 1.3.6.1.4.1.39003.3.2.7.15.1 | NA | ||
row · not-accessible · current An entry (row) in the sub10UnitMgmtSnmpUserTable. If the rowStatus is set to notInService(2) then the entry is not valid and no columnar objects are returned. | ||||
| Csub10UnitMgmtSnmpUserIndex | 1.3.6.1.4.1.39003.3.2.7.15.1.1 | Unsigned32 (1..10) | NA | |
column · Unsigned32 (1..10) · not-accessible · current The sub10UnitMgmtSnmpUserTable index. If the rowStatus is not set to enabled(1) then the entry is not valid and no columnar objects are returned except for the rowStatus object itself. | ||||
| Csub10UnitMgmtSnmpUserRowStatus | 1.3.6.1.4.1.39003.3.2.7.15.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or notInService(2) which indicates that the row is operationally in use or not. The default value is notInService(2) meaning the entry is not used by default. To make the entry valid this object must be set to enabled(1), createAndGo(4) or createAndWait(5). To delete the row set this to destroy(6). | ||||
| Csub10UnitMgmtSnmpUserName | 1.3.6.1.4.1.39003.3.2.7.15.1.3 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current The administratively assigned SNMPv3 User name. | ||||
| Csub10UnitMgmtSnmpUserGroup | 1.3.6.1.4.1.39003.3.2.7.15.1.4 | Sub10UserGroup | RW | |
column · Sub10UserGroup · read-write · current The user group type. Authentication and Privacy policies are assigned to a user group and not individual users. | ||||
| Csub10UnitMgmtSnmpUserAuthPwd | 1.3.6.1.4.1.39003.3.2.7.15.1.5 | OCTET STRING (SIZE (6..32)) | RW | |
column · OCTET STRING (SIZE (6..32)) · read-write · current The unique SNMPv3 authentication protocol password provided by the system administrator. This object can be set but is not visible when read. | ||||
| Csub10UnitMgmtSnmpUserAuthPwdChk | 1.3.6.1.4.1.39003.3.2.7.15.1.6 | OCTET STRING (SIZE (6..32)) | RW | |
column · OCTET STRING (SIZE (6..32)) · read-write · current The unique SNMPv3 authentication protocol password provided by the system administrator used to verify the setting of sub10UnitMgmtSnmpUserAuthPassword. This object can be set but is not visible when read. | ||||
| Csub10UnitMgmtSnmpUserPrivPwd | 1.3.6.1.4.1.39003.3.2.7.15.1.7 | OCTET STRING (SIZE (6..32)) | RW | |
column · OCTET STRING (SIZE (6..32)) · read-write · current The unique SNMPv3 privacy protocol password provided by the system administrator. This object can be set but is not visible when read. | ||||
| Csub10UnitMgmtSnmpUserPrivPwdChk | 1.3.6.1.4.1.39003.3.2.7.15.1.8 | OCTET STRING (SIZE (6..32)) | RW | |
column · OCTET STRING (SIZE (6..32)) · read-write · current The unique SNMPv3 privacy protocol password provided by the system administrator used to verify the setting of sub10UnitMgmtSnmpUserPrivPassword. This object can be set but is not visible when read. | ||||
| Tsub10UnitMgmtSnmpAccessTable | 1.3.6.1.4.1.39003.3.2.7.16 | NA | ||
table · not-accessible · current The table of SNMPv3 Access configuration. | ||||
| Rsub10UnitMgmtSnmpAccessEntry | 1.3.6.1.4.1.39003.3.2.7.16.1 | NA | ||
row · not-accessible · current An entry (row) in the sub10UnitMgmtSnmpAccessTable. If the rowStatus is set to notInService(2) then the entry is not valid and no columnar objects are returned. | ||||
| Csub10UnitMgmtSnmpAccessIndex | 1.3.6.1.4.1.39003.3.2.7.16.1.1 | Unsigned32 (1..3) | NA | |
column · Unsigned32 (1..3) · not-accessible · current The sub10UnitMgmtSnmpAccessTable index. If the rowStatus is not set to enabled(1) then the entry is not valid and no columnar objects are returned except for the rowStatus object itself. | ||||
| Csub10UnitMgmtSnmpAccessRowStatus | 1.3.6.1.4.1.39003.3.2.7.16.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or notInService(2) which indicates that the row is operationally in use or not. The default value is notInService(2) meaning the entry is not used by default. To make the entry valid this object must be set to enabled(1), createAndGo(4) or createAndWait(5). To delete the row set this to destroy(6). | ||||
| Csub10UnitMgmtSnmpAccessName | 1.3.6.1.4.1.39003.3.2.7.16.1.3 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current The administratively assigned SNMPv3 access name. This is used as an alias for the access address for purposes of identification. The name is not used in the SNMP protocol. | ||||
| Csub10UnitMgmtSnmpAccessIpAddr | 1.3.6.1.4.1.39003.3.2.7.16.1.4 | OCTET STRING (SIZE (0..15)) | RW | |
column · OCTET STRING (SIZE (0..15)) · read-write · current The administratively assigned SNMP access IP address. Only SNMP requests from this address will be serviced by the SNMP agent. | ||||
| Tsub10UnitMgmtSnmpTargetTable | 1.3.6.1.4.1.39003.3.2.7.17 | NA | ||
table · not-accessible · current The table of SNMPv3 Target configuration. This table defines the addresses of target SNMPv3 managers to send Notifications. | ||||
| Rsub10UnitMgmtSnmpTargetEntry | 1.3.6.1.4.1.39003.3.2.7.17.1 | NA | ||
row · not-accessible · current An entry (row) in the sub10UnitMgmtSnmpTargetTable. If the rowStatus is set to notInService(2) then the entry is not valid and no columnar objects are returned. | ||||
| Csub10UnitMgmtSnmpTargetIndex | 1.3.6.1.4.1.39003.3.2.7.17.1.1 | Unsigned32 (1..3) | NA | |
column · Unsigned32 (1..3) · not-accessible · current The sub10UnitMgmtSnmpTargetTable index. If the rowStatus is not set to enabled(1) then the entry is not valid and no columnar objects are returned except for the rowStatus object itself. | ||||
| Csub10UnitMgmtSnmpTargetRowStatus | 1.3.6.1.4.1.39003.3.2.7.17.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or notInService(2) which indicates that the row is operationally in use or not. The default value is notInService(2) meaning the entry is not used by default. To make the entry valid this object must be set to enabled(1), createAndGo(4) or createAndWait(5). To delete the row set this to destroy(6). | ||||
| Csub10UnitMgmtSnmpTargetName | 1.3.6.1.4.1.39003.3.2.7.17.1.3 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current The administratively assigned SNMPv3 target name. | ||||
| Csub10UnitMgmtSnmpTargetIpAddr | 1.3.6.1.4.1.39003.3.2.7.17.1.4 | OCTET STRING (SIZE (0..15)) | RW | |
column · OCTET STRING (SIZE (0..15)) · read-write · current The administratively assigned SNMP target IP address. When enabled SNMPv3 Notifications are sent to this address. | ||||
| Csub10UnitMgmtSnmpTargetUserName | 1.3.6.1.4.1.39003.3.2.7.17.1.5 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current The administratively assigned SNMPv3 target user name. The security model configured for this user is used when sending notifications to the target address. | ||||
| Nsub10UnitMgmtSmtp | 1.3.6.1.4.1.39003.3.2.8 | |||
| Nsub10UnitMgmtFirmware | 1.3.6.1.4.1.39003.3.2.9 | |||
| Ssub10UnitMgmtFirmwareSelectBank | 1.3.6.1.4.1.39003.3.2.9.1 | Sub10FirmwareBank | RW | |
scalar · Sub10FirmwareBank · read-write · current Currently selected bank which unit uses to boot. | ||||
| Ssub10UnitMgmtFirmwareLoadedBank | 1.3.6.1.4.1.39003.3.2.9.2 | Sub10FirmwareBank | RO | |
scalar · Sub10FirmwareBank · read-only · current Currently loaded bank. The firmware version number running in this bank is defined by sub10UnitMgmtFirmwareVersion. | ||||
| Ssub10UnitMgmtFirmwareVersion | 1.3.6.1.4.1.39003.3.2.9.3 | OCTET STRING (SIZE (0..15)) | RO | |
scalar · OCTET STRING (SIZE (0..15)) · read-only · current The firmware version currently running on the local unit. This is the version of the firmware loaded into the bank number defined in sub10UnitMgmtFirmwareLoadedBank. | ||||
| Ssub10UnitMgmtFirmwareBootVersion | 1.3.6.1.4.1.39003.3.2.9.4 | OCTET STRING (SIZE (0..15)) | RO | |
scalar · OCTET STRING (SIZE (0..15)) · read-only · current The firmware boot version currently running on the local unit. This is the boot version of the firmware loaded into the bank number defined in sub10UnitMgmtFirmwareLoadedBank. | ||||
| Ssub10UnitMgmtFirmwareAction | 1.3.6.1.4.1.39003.3.2.9.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current The firmware bank action object is used to perform certain actions on a firmware bank. Using this it is possible to reboot the unit, copy banks and upload software to the currently inactive bank. After a Set of this object it's value is always reset to fmwNone(1). The progress of the action may be monitored using a get of the objects 'sub10UnitMgmtFirmwareActStatus' and 'sub10UnitMgmtFirmwareActProgress'. fmwNone(1) - Perform no firmware action unit. fmwReboot(2) - Perform immediate unit reboot of the unit and start the firmware currently loaded in 'sub10UnitMgmtFirmwareSelectBank'. fmwCopyInactiveBank(3) - Copy the firmware currently loaded in 'sub10UnitMgmtFirmwareLoadedBank' to the inactive bank. fmwUploadInactiveBank(4) - Upload the firmware image named by 'sub10UnitMgmtFirmwareUplImage' from the server address 'sub10UnitFirmwareUplServerIp' and load to the inactive bank.
| ||||
| Tsub10UnitMgmtFirmwareBankTable | 1.3.6.1.4.1.39003.3.2.9.6 | NA | ||
table · not-accessible · current This tables contains information regarding the firmware banks. | ||||
| Rsub10UnitMgmtFirmwareBankEntry | 1.3.6.1.4.1.39003.3.2.9.6.1 | NA | ||
row · not-accessible · current An entry (row) in the sub10UnitMgmtFirmwareBankTable. | ||||
| Csub10UnitMgmtFirmwareBankIndex | 1.3.6.1.4.1.39003.3.2.9.6.1.1 | Sub10FirmwareBank | NA | |
column · Sub10FirmwareBank · not-accessible · current The sub10UnitMgmtFirmwareBankTable index. | ||||
| Csub10UnitMgmtFirmwareBankVersion | 1.3.6.1.4.1.39003.3.2.9.6.1.2 | OCTET STRING (SIZE (0..15)) | RO | |
column · OCTET STRING (SIZE (0..15)) · read-only · current The firmware version currently installed in this bank. | ||||
| Csub10UnitMgmtFirmwareBankImage | 1.3.6.1.4.1.39003.3.2.9.6.1.3 | OCTET STRING (SIZE (0..64)) | RO | |
column · OCTET STRING (SIZE (0..64)) · read-only · current The firmware image name currently installed in this bank. | ||||
| Ssub10UnitMgmtFirmwareUplImage | 1.3.6.1.4.1.39003.3.2.9.7 | OCTET STRING (SIZE (0..64)) | RW | |
scalar · OCTET STRING (SIZE (0..64)) · read-write · current The firmware image name to be uploaded from the server defined by 'sub10UnitFirmwareUplServerIp' using the firmware action 'sub10UnitFirmwareAction=fmwUpload(4)'. | ||||
| Ssub10UnitMgmtFirmwareUplSvrIp | 1.3.6.1.4.1.39003.3.2.9.8 | OCTET STRING (SIZE (7..15)) | RW | |
scalar · OCTET STRING (SIZE (7..15)) · read-write · current The IP address of the server used to upload the firmware image defined by sub10UnitMgmtFirmwareUplImage. | ||||
| Ssub10UnitMgmtFirmwareFromBank | 1.3.6.1.4.1.39003.3.2.9.9 | Sub10FirmwareBank | RO | |
scalar · Sub10FirmwareBank · read-only · current The bank currently being copied from by the Firmware action sub10UnitMgmtFirmwareAction = fmwCopyInactiveBank(4). | ||||
| Ssub10UnitMgmtFirmwareToBank | 1.3.6.1.4.1.39003.3.2.9.10 | Sub10FirmwareBank | RO | |
scalar · Sub10FirmwareBank · read-only · current The bank currently being uploaded or copied to by the Firmware actions sub10UnitMgmtFirmwareAction = fmwUploadInactiveBank(4) or sub10UnitMgmtFirmwareAction = fmwCopyInactiveBank(4). | ||||
| Ssub10UnitMgmtFirmwareActStatus | 1.3.6.1.4.1.39003.3.2.9.11 | INTEGER | RO | |
scalar · INTEGER · read-only · current The status of the firmware bank action which can be repeatedly read using a Get to report the progress of the the action and verify that it has either succeeded or failed. The value is left in the final state after the Firmware Action has completed.
| ||||
| Ssub10UnitMgmtFirmwareActProgress | 1.3.6.1.4.1.39003.3.2.9.12 | Integer32 (0..100) | RO | |
scalar · Integer32 (0..100) · read-only · current The % progress of firmware action when loading the firmware image to a firmware bank or copying a firmware image from on1 bank to another bank. | ||||
| Nsub10UnitMgmtDNS | 1.3.6.1.4.1.39003.3.2.10 | |||
| Tsub10UnitMgmtDNSTable | 1.3.6.1.4.1.39003.3.2.10.1 | NA | ||
table · not-accessible · current This tables defines the Domain Name Servers. | ||||
| Rsub10UnitMgmtDNSEntry | 1.3.6.1.4.1.39003.3.2.10.1.1 | NA | ||
row · not-accessible · current An entry (row) in the sub10UnitMgmtDNSTable. | ||||
| Csub10UnitMgmtDNSIndex | 1.3.6.1.4.1.39003.3.2.10.1.1.1 | Unsigned32 (1..2) | NA | |
column · Unsigned32 (1..2) · not-accessible · current The sub10UnitMgmtDNSTable index. | ||||
| Csub10UnitMgmtDNServer | 1.3.6.1.4.1.39003.3.2.10.1.1.2 | OCTET STRING (SIZE (7..15)) | RW | |
column · OCTET STRING (SIZE (7..15)) · read-write · current The administratively assigned DNS server IP for the unit. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2). | ||||
| Nsub10UnitMgmtEncryption | 1.3.6.1.4.1.39003.3.2.11 | |||
| Ssub10UnitMgmtEncryptMode | 1.3.6.1.4.1.39003.3.2.11.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administratively assigned License key for the unit. The license key enables capabilities within the unit. The capabilities currently available by the configured license key are readable objects.
| ||||
| Ssub10UnitMgmtEncryptKey | 1.3.6.1.4.1.39003.3.2.11.2 | OCTET STRING (SIZE (0..128)) | RW | |
scalar · OCTET STRING (SIZE (0..128)) · read-write · current The administratively assigned Encryption key. | ||||
| Nsub10UnitMgmtLicense | 1.3.6.1.4.1.39003.3.2.12 | |||
| Ssub10UnitMgmtLicenseKey | 1.3.6.1.4.1.39003.3.2.12.1 | OCTET STRING (SIZE (0..128)) | RW | |
scalar · OCTET STRING (SIZE (0..128)) · read-write · current The administratively assigned License key for the unit. The license key enables capabilities within the unit. The capabilities currently available by the configured license key are readable objects. | ||||
| Ssub10UnitMgmtLicenseAES | 1.3.6.1.4.1.39003.3.2.12.2 | Sub10State | RO | |
scalar · Sub10State · read-only · current Indication if AES encryption is included in the current license key. | ||||
| Nsub10UnitMgmtSyncE | 1.3.6.1.4.1.39003.3.2.13 | |||
| Ssub10UnitMgmtSyncEMode | 1.3.6.1.4.1.39003.3.2.13.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The SyncE Mode. Setting this to syncEProvider(1) configures the unit as a Slave clock. In this case the unit at the other end of the link should be set to syncEConsumer(2). IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).
| ||||
| Nsub10UnitMgmtActions | 1.3.6.1.4.1.39003.3.2.20 | |||
| Ssub10UnitMgmtTransaction | 1.3.6.1.4.1.39003.3.2.20.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is used to commit or rollback the setting of object configuration. It only applies where the objects are subject to transactional requirements. For example the setting of the Unit's IP Address requires that a transaction be committed. If the transaction is not committed after a rollback timeout then the unit will automatically action a rollback to the previous value. The rollback timeout is configurable 'sub10UnitMgmtRollbackTimeout'
| ||||
| Ssub10UnitMgmtTransactionStatus | 1.3.6.1.4.1.39003.3.2.20.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current This indicates either a transaction is currently in progress or if the last transaction was committed successfully or was rolled back.
| ||||
| Ssub10UnitMgmtRollbackTimeout | 1.3.6.1.4.1.39003.3.2.20.3 | Unsigned32 (30..300) | RW | |
scalar · Unsigned32 (30..300) · read-write · current The timeout in seconds after which uncommitted Sets will be rolled back to their previous values. A rollback only affects those objects which are subject to transactions. | ||||
| Ssub10UnitMgmtTransactionMode | 1.3.6.1.4.1.39003.3.2.20.4 | Sub10State | RW | |
scalar · Sub10State · read-write · current Enables and Disables transactions. If sub10UnitMgmTransactionMode is stateDisabled(0) then no objects are subject to commit and rollback. | ||||
| Ssub10UnitMgmtResetAction | 1.3.6.1.4.1.39003.3.2.20.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is used to reset unit configuration and stats. resetFactoryDefaults(2) - Resets all configuration to Factory Defaults, requires a reboot. resetStatistics(3) - Resets according to setting of sub10UnitMgmtResetStatsGroup For reset of all stats sub10UnitMgmtResetStatsGroup = 'statsGroupAll'. resetAlarmConfig(4) - Resets according to setting of sub10UnitMgmtResetAlarmsType For reset of all alarms sub10UnitMgmtResetAlarmsType = 'resetAlarmTypeAll'.
| ||||
| Ssub10UnitMgmtResetStatsGroup | 1.3.6.1.4.1.39003.3.2.20.6 | Sub10StatsGroup | RW | |
scalar · Sub10StatsGroup · read-write · current This is used to reset specific statistics when set prior to submitting sub10UnitMgmtResetAction = resetStatistics(4). For reset of all stats sub10UnitMgmtResetStatsGroup = 'statsGroupAll'. | ||||
| Ssub10UnitMgmtResetAlarmsType | 1.3.6.1.4.1.39003.3.2.20.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is used to reset specific alarm configuration when set prior to submitting sub10UnitMgmtResetAction = resetAlarmConfig(5). For reset of all alarms sub10UnitMgmtResetAlarmsType = resetAlarmTypeAll(1).
| ||||
| Nsub10Ethernet | 1.3.6.1.4.1.39003.4 | |||
| Nsub10EthernetStatus | 1.3.6.1.4.1.39003.4.1 | |||
| Nsub10EthernetLocalStatus | 1.3.6.1.4.1.39003.4.1.1 | |||
| Tsub10EthLclStatusTable | 1.3.6.1.4.1.39003.4.1.1.1 | NA | ||
table · not-accessible · current This table defines the local status objects of the ethernet interface. | ||||
| Rsub10EthLclStatusEntry | 1.3.6.1.4.1.39003.4.1.1.1.1 | NA | ||
| Csub10EthLclLinkStatus | 1.3.6.1.4.1.39003.4.1.1.1.1.1 | Sub10OperStatus | RO | |
column · Sub10OperStatus · read-only · current The status of the ethernet link. Synonymous with interfaces OperState | ||||
| Csub10EthLclMacAddress | 1.3.6.1.4.1.39003.4.1.1.1.1.2 | Sub10MacAddress | RO | |
column · Sub10MacAddress · read-only · current The MAC address of the local ethernet interface. Synonymous with interfaces ifPhysAddress | ||||
| Csub10EthLclSpeed | 1.3.6.1.4.1.39003.4.1.1.1.1.3 | Unsigned32 (0..4294967295) | RO | |
column · Unsigned32 (0..4294967295) · read-only · current The estimated speed of the local ethernet interface in bits per second. Synonymous with interfaces ifSpeed | ||||
| Csub10EthLclDuplex | 1.3.6.1.4.1.39003.4.1.1.1.1.4 | Sub10Duplex | RO | |
column · Sub10Duplex · read-only · current The duplex operation of the local ethernet interface | ||||
| Csub10EthLclMDI | 1.3.6.1.4.1.39003.4.1.1.1.1.5 | Sub10MDIType | RO | |
column · Sub10MDIType · read-only · current The MDI/MDIX state of the local ethernet interface | ||||
| Csub10EthIfIndex | 1.3.6.1.4.1.39003.4.1.1.1.1.6 | Sub10EthInterfaceIndex | NA | |
column · Sub10EthInterfaceIndex · not-accessible · current A unique value, greater than zero, for each ethernet interface. It is recommended that values are assigned contiguously starting from 1. This is used as an index to the ethernet based enterprise MIB tables and will reflect the number of physical ethernet ports. | ||||
| Nsub10EthernetRemoteStatus | 1.3.6.1.4.1.39003.4.1.2 | |||
| Tsub10EthRmtStatusTable | 1.3.6.1.4.1.39003.4.1.2.1 | NA | ||
table · not-accessible · current This table defines the remote status objects of the ethernet interface. | ||||
| Rsub10EthRmtStatusEntry | 1.3.6.1.4.1.39003.4.1.2.1.1 | NA | ||
| Csub10EthRmtLinkStatus | 1.3.6.1.4.1.39003.4.1.2.1.1.1 | Sub10OperStatus | RO | |
column · Sub10OperStatus · read-only · current The status of the remote ethernet interface. Synonymous but not identical with interfaces OperState on the remote unit | ||||
| Csub10EthRmtMacAddress | 1.3.6.1.4.1.39003.4.1.2.1.1.2 | Sub10MacAddress | RO | |
column · Sub10MacAddress · read-only · current The MAC address of the remote ethernet interface. Synonymous with interfaces ifPhysAddress on the remote unit. | ||||
| Csub10EthRmtSpeed | 1.3.6.1.4.1.39003.4.1.2.1.1.3 | Unsigned32 (0..4294967295) | RO | |
column · Unsigned32 (0..4294967295) · read-only · current The estimated speed of the remote ethernet interface in bits per second. Synonymous with interfaces ifSpeed on the remote unit | ||||
| Csub10EthRmtDuplex | 1.3.6.1.4.1.39003.4.1.2.1.1.4 | Sub10Duplex | RO | |
column · Sub10Duplex · read-only · current The duplex operation of the remote ethernet interface | ||||
| Csub10EthRmtMDI | 1.3.6.1.4.1.39003.4.1.2.1.1.5 | Sub10MDIType | RO | |
column · Sub10MDIType · read-only · current The MDI/MDIX state of the remote ethernet interface | ||||
| Nsub10EthernetMgmt | 1.3.6.1.4.1.39003.4.2 | |||
| Nsub10EthMgmtPhy | 1.3.6.1.4.1.39003.4.2.1 | |||
| Tsub10EthMgmtPhyTable | 1.3.6.1.4.1.39003.4.2.1.1 | NA | ||
table · not-accessible · current This table defines the status objects of the ethernet interface. | ||||
| Rsub10EthMgmtPhyEntry | 1.3.6.1.4.1.39003.4.2.1.1.1 | NA | ||
| Csub10EthMgmtPhyAutoNeg | 1.3.6.1.4.1.39003.4.2.1.1.1.1 | Sub10State | RW | |
column · Sub10State · read-write · current Auto-negotiation of ethernet interface parameters. | ||||
| Csub10EthMgmtPhySpeed | 1.3.6.1.4.1.39003.4.2.1.1.1.2 | Unsigned32 (0..4294967295) | RW | |
column · Unsigned32 (0..4294967295) · read-write · current Speed of the ethernet interface in bits per second used only when sub10UnitMgmtPhyAutoNeg=disabled. | ||||
| Csub10EthMgmtPhyDuplex | 1.3.6.1.4.1.39003.4.2.1.1.1.3 | Sub10Duplex | RW | |
column · Sub10Duplex · read-write · current The duplex operation of the ethernet interface used only when sub10UnitMgmtPhyAutoNeg=disabled. | ||||
| Csub10EthMgmtPhyMDI | 1.3.6.1.4.1.39003.4.2.1.1.1.4 | Sub10MDIType | RW | |
column · Sub10MDIType · read-write · current The duplex operation of the ethernet interface used only when sub10UnitMgmtPhyAutoNeg=disabled. | ||||
| Nsub10EthMgmtVlan | 1.3.6.1.4.1.39003.4.2.2 | |||
| Ssub10EthMgmtVlanFiltering | 1.3.6.1.4.1.39003.4.2.2.1 | Sub10State | RW | |
scalar · Sub10State · read-write · current VLAN filtering on the ethernet interface. This applies to user traffic only not management traffic however to enable VLAN filtering a Unit Management VLAN configuration must be set. See sub10UnitMgmtVlan. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2). | ||||
| Ssub10EthMgmtVlanDefaultEnabled | 1.3.6.1.4.1.39003.4.2.2.2 | Sub10State | RW | |
scalar · Sub10State · read-write · current Enable Default VLAN tagging and untagging on the ethernet interface. Only valid when sub10EthMgmtVlanFiltering is enabled. Default VAN tagging allows manipulation of untagged traffic ingressing the interface by applying the specified Default VLAN Id, priority and DEI and manipulation of traffic egressing the ethernet interface that is tagged with the Default VLAN by stripping off the VLAN and transmitting as untagged traffic. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2). | ||||
| Ssub10EthMgmtVlanDefaultId | 1.3.6.1.4.1.39003.4.2.2.3 | Sub10VlanId | RW | |
scalar · Sub10VlanId · read-write · current The default vlan id which is tagged to all incoming untagged user traffic ingressing the ethernet interface. The default VLAN is also untagged from all user traffic egressing the ethernet interface. The default VLAN must be present in the allowed VLAN table sub10EthMgmtVlanAllowedTable and is only valid when sub10EthMgmtVlanDefaultEnabled and sub10EthMgmtVlanFiltering are enabled. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2). | ||||
| Ssub10EthMgmtVlanDefaultPriority | 1.3.6.1.4.1.39003.4.2.2.4 | Sub10VlanPriority | RW | |
scalar · Sub10VlanPriority · read-write · current The default vlan priority used when tagging the default VLAN to all incoming untagged user traffic ingressing the ethernet interface. Only valid when sub10EthMgmtVlanDefaultEnabled and sub10EthMgmtVlanFiltering are enabled. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2). | ||||
| Ssub10EthMgmtVlanDefaultDEI | 1.3.6.1.4.1.39003.4.2.2.5 | Sub10State | RW | |
scalar · Sub10State · read-write · current The default vlan drop eligible indicator used when tagging the default VLAN to all incoming untagged user traffic ingressing the ethernet interface. Only valid when sub10EthMgmtVlanDefaultEnabled and sub10EthMgmtVlanFiltering are enabled. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2). | ||||
| Ssub10EthMgmtVlanIngressAction | 1.3.6.1.4.1.39003.4.2.2.6 | Sub10VlanTagAction | RO | |
scalar · Sub10VlanTagAction · read-only · current The manipulation action used for all ethernet frames being received (ingress) in from the ethernet interface. Only if the default VLAN is set sub10EthMgmtVlanDefaultVlanId > 0 and sub10EthMgmtVlanFiltering is enabled. untag - untag all incoming frames that are tagged with sub10EthMgmtVlanDefaultVlanId. tag - tag all incoming untagged frames with sub10EthMgmtVlanDefaultVlanId, ,sub10EthMgmtVlanDefaultPriority and sub10EthMgmtVlanDefaultDEI. and priority sub10EthMgmtTagWithVlanPriority. drop - discard the frame, do not forward. This is currently fixed to tag all ingressing traffic if a default VLAN is set sub10EthMgmtVlanDefaultVlanId > 0. | ||||
| Ssub10EthMgmtVlanEgressAction | 1.3.6.1.4.1.39003.4.2.2.7 | Sub10VlanTagAction | RO | |
scalar · Sub10VlanTagAction · read-only · current The manipulation action used for all ethernet frames being transmitted (egress) out of the ethernet interface. Only if the default VLAN is set sub10EthMgmtVlanDefaultVlanId > 0 and sub10EthMgmtVlanFiltering is enabled. untag - untag all outgoing frames that are tagged with sub10EthMgmtVlanDefaultVlanId. tag - tag all outgoing untagged frames with sub10EthMgmtVlanDefaultVlanId, ,sub10EthMgmtVlanDefaultPriority and sub10EthMgmtVlanDefaultDEI. and priority sub10EthMgmtTagWithVlanPriority. drop - discard the frame, do not forward. This is currently fixed to untag all egressing traffic. | ||||
| Tsub10EthMgmtVlanAllowedTable | 1.3.6.1.4.1.39003.4.2.2.8 | NA | ||
table · not-accessible · current This tables defines the VLANs that are allowed to pass through the ethernet interface. The table is only used when the value of sub10EthMgmtVlanFiltering is enabled. The table only contains an entry if the specific vlan is to be allowed to flow through the interface. If a VLAN is not in the table then the ethernet frame is dropped. If sub10EthMgmtVlanFiltering is enabled this table must contain at least 1 VLAN. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2). | ||||
| Rsub10EthMgmtVlanAllowedEntry | 1.3.6.1.4.1.39003.4.2.2.8.1 | NA | ||
row · not-accessible · current An entry (row) in the sub10UnitMgmtVlanTable. If the rowStatus is set to notInService(2) then the entry is not valid and no columnar objects are returned. | ||||
| Csub10EthMgmtVlanAllowedIndex | 1.3.6.1.4.1.39003.4.2.2.8.1.1 | Unsigned32 (1..60) | NA | |
column · Unsigned32 (1..60) · not-accessible · current The sub10EthMgmtVlanTable index. | ||||
| Csub10EthMgmtVlanAllowedRowStatus | 1.3.6.1.4.1.39003.4.2.2.8.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or notInService(2) which indicates that the row is operationally in use or not. The default value is notInService(2) meaning the entry is not used by default. To make the entry valid with already consistent row objects this object must be set to active(1). If row objects are not yet set to consistent values the row status must first be set to createAndWait(5) after which the row status is set to 'notReady(3)'. When in the 'notReady(3)' state row objects can then be set to consistent values before row status can be set to active(1). To delete the row set this to destroy(6). | ||||
| Csub10EthMgmtVlanAllowedId | 1.3.6.1.4.1.39003.4.2.2.8.1.3 | Sub10VlanId | RW | |
column · Sub10VlanId · read-write · current The vlan id which is allowed to pass through the ethernet interface. Duplicate vlan ids in multiple entries of the table with RowStatus 'active(1) are not allowed and any attempt to set a duplicate active entry will be rejected. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2). | ||||
| Nsub10EthMgmtQoS | 1.3.6.1.4.1.39003.4.2.3 | |||
| Ssub10EthMgmtQoSActiveState | 1.3.6.1.4.1.39003.4.2.3.1 | Sub10State | RW | |
scalar · Sub10State · read-write · current This defines if QoS is enabled or disabled. | ||||
| Ssub10EthMgmtQoSMode | 1.3.6.1.4.1.39003.4.2.3.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the mode of QoS action to be applied to the QoS queues. qosEthernet: - Traffic is mapped to QoS queues - based on Ethernet protocol - VLANId and/or PCP Bits. - See sub10EthMgmtQoSVlanMappingTable - and sub10EthMgmtQoSPCPMappingTable. qosIPMPLS: - Traffic is mapped to QoS queues - based on IP protocol - DSCP markings and/or MPLS traffic - classes. See sub10EthMgmtQoSDSCPMappingTable and sub10EthMgmtQoSMPLSMappingTable.
| ||||
| Ssub10EthMgmtQoSUntaggedQueue | 1.3.6.1.4.1.39003.4.2.3.3 | Sub10QoSQueue | RW | |
scalar · Sub10QoSQueue · read-write · current This defines the QoS queue where all untagged ethernet frames are placed. Only valid when sub10EthMgmtQoSQType = 'qosEthernet' For tagged frames see sub10EthMgmtQoSVlanMappingTable and sub10EthMgmtQoSPCPMappingTable. | ||||
| Tsub10EthMgmtQoSQTable | 1.3.6.1.4.1.39003.4.2.3.4 | NA | ||
table · not-accessible · current This table configures the characteristics of a Quality of Service queue. There are a fixed number of 8 queues in total and therefore 8 entries in this table indexed 1 thru 8. The number of queue entries in the table is given by the value of sub10EthMgmtQoSQNumber. | ||||
| Rsub10EthMgmtQoSQEntry | 1.3.6.1.4.1.39003.4.2.3.4.1 | NA | ||
row · not-accessible · current An entry (row) in the sub10EthMgmtQoSQTable. | ||||
| Csub10EthMgmtQoSQIndex | 1.3.6.1.4.1.39003.4.2.3.4.1.1 | Unsigned32 (1..8) | NA | |
column · Unsigned32 (1..8) · not-accessible · current The queue number used as an index, fixed to 8 standard queues. | ||||
| Csub10EthMgmtQoSQSchedulingType | 1.3.6.1.4.1.39003.4.2.3.4.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The scheduling discipline applied to the queue. qosSPQ - Strict Priority Queueing Queues are serviced in strict priority order. Packets on the queue are servicedd and transmitted until either the queue is empty or a packet is found in a higher queue, in the latter case the higher priority queue take precedence. Individual PCP (CoS) bits or DSCP markings in each packet are not observed within the queue and are not therefore transmitted first according to their relative priority. Instead it is possible to map certain VLANs, PCP bits and DSCP marking to certain queues to achieve priority transmission. The mapping of VLAN, PCP bits or DSCP markings to a specific queue are managed using tables : sub10EthMgmtQoSVlanTable sub10EthMgmtQoSPCPTable sub10EthMgmtQoSDSCPTable qosDWRR - Deficit Weighted Round Robin A weighting is allocated to each queue which defines the number of bytes that can be transmitted from that queue in a single visit of the scheduler. This is used to calculate a quantum which is the number of bytes that can always be transmitted in each visit of the scheduler. A deficit counter is also maintained across visits from the scheduler, at each visit the quantum is added to the deficit. This ensures that on average a queue that is not loaded to its intended capacity will utilise the calculated deficit at times when the queue is busy. At startup Deficit counter is initialised to zero. On each visit of the scheduler packets are transmitted according to the following rules... Deficit = Quantum + Deficit. while (Queue not empty and PktLength <= Deficit) Transmit Pkt Deficit = Deficit - PktLength Remaining Deficit is carried forward to the next visit of the scheduler. Effective behaviour of DWRR is as follows: 1. Available bandwidth is shared fairly when queues are not saturated 2. Lower priority saturated queues will transmit at their allocated service rate. 3. Any remaining bandwidth is shared amongst unsaturated queues. NB. In a mixed configuration where some queues are configured as Strict Priority (SP) and some configured as Deficit Weighted Round Robin (DWRR), then queues configured as SP should all be higher in scheduling priority than those configured as DWRR. This is to avoid the lower priority queues having transmission precedence over higher priority queues.
| ||||
| Csub10EthMgmtQoSQDWRRWeight | 1.3.6.1.4.1.39003.4.2.3.4.1.3 | Unsigned32 (0..100) | RW | |
column · Unsigned32 (0..100) · read-write · current A percentage weighting factor used to calculate the quantum value used to calculate the starting transmission credit at each visit of the queue scheduler. Only for scheduling type Deficit Weighted Round Robin. sub10EthMgmtQoSQSchedulingType = 'qosDWRR' The weighting is calculated as the ratio of the transmit rate configured as a percentage. The internal implementation of DWRR will calculate the correct quantum based on total bandwidth available. | ||||
| Csub10EthMgmtQoSQCongestionPolicy | 1.3.6.1.4.1.39003.4.2.3.4.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The policy used when a queue is congested.
| ||||
| Csub10EthMgmtQoSQSizeMax | 1.3.6.1.4.1.39003.4.2.3.4.1.5 | Unsigned32 (0..4294967295) | RO | |
column · Unsigned32 (0..4294967295) · read-only · current The maximum size of the queue expressed in packets. | ||||
| Csub10EthMgmtQoSQLen | 1.3.6.1.4.1.39003.4.2.3.4.1.6 | Unsigned32 (0..4294967295) | RO | |
column · Unsigned32 (0..4294967295) · read-only · current The current length of the queue expressed in packets. | ||||
| Ssub10EthMgmtQoSVlanMappingNumber | 1.3.6.1.4.1.39003.4.2.3.5 | Unsigned32 (0..100) | RO | |
scalar · Unsigned32 (0..100) · read-only · current The number of sub10EthMgmtQoSVlanMappingTable table entries present on this system. | ||||
| Tsub10EthMgmtQoSVlanTable | 1.3.6.1.4.1.39003.4.2.3.6 | NA | ||
table · not-accessible · current This table configures the Quality of Service Vlan to queue mapping. Multiple Vlans may be mapped to any queue. On egress of the ethernet interface all pkts tagged with the specific Vlan Id are inserted onto the specified queue. See sub10EthMgmtQoSQTable for more information on QoS queueing. The number of entries in the table is given by the value of sub10EthMgmtQoSVlanNumber. | ||||
| Rsub10EthMgmtQoSVlanEntry | 1.3.6.1.4.1.39003.4.2.3.6.1 | NA | ||
row · not-accessible · current An entry (row) in the sub10EthMgmtQoSVlanMappingTable. | ||||
| Csub10EthMgmtQoSVlanIndex | 1.3.6.1.4.1.39003.4.2.3.6.1.1 | Unsigned32 (1..16) | NA | |
column · Unsigned32 (1..16) · not-accessible · current The sub10EthMgmtQoSVlanMappingTable index. | ||||
| Csub10EthMgmtQoSVlanId | 1.3.6.1.4.1.39003.4.2.3.6.1.2 | Sub10VlanId | RW | |
column · Sub10VlanId · read-write · current The vlan id used as an index to the table and which is egressing through the ethernet interface and which should be placed on the queue specified by sub10EthMgmtQoSVlanQueueIndex. | ||||
| Csub10EthMgmtQoSVlanQueue | 1.3.6.1.4.1.39003.4.2.3.6.1.3 | Sub10QoSQueue | RW | |
column · Sub10QoSQueue · read-write · current The queue number which identifies the specific queue where the packets that are tagged with the Vlan Id specified in sub10EthMgmtQoSVlanId are inserted. | ||||
| Tsub10EthMgmtQoSPCPTable | 1.3.6.1.4.1.39003.4.2.3.8 | NA | ||
table · not-accessible · current This table configures the Quality of Service Priority Code Point (PCP) or Pbits to queue mapping. Multiple PCPs may be mapped to the same queue but the same PCP cannot be mapped to more than one queue. This table has a maximum size of 8 entries with exactly 1 entry per PCP bit. On egress of the ethernet interface all pkts tagged with the specific PCP bit (irrespective of its Vlan Id) is inserted on the specified queue. See sub10EthMgmtQoSQTable for more information on QoS queueing. The number of entries in the table is given by the value of sub10EthMgmtQoSPCPMappingNumber (maximum 8). | ||||
| Rsub10EthMgmtQoSPCPEntry | 1.3.6.1.4.1.39003.4.2.3.8.1 | NA | ||
row · not-accessible · current An entry (row) in the sub10EthMgmtQoSPCPMappingTable. | ||||
| Csub10EthMgmtQoSPCPIndex | 1.3.6.1.4.1.39003.4.2.3.8.1.1 | Unsigned32 (1..8) | NA | |
column · Unsigned32 (1..8) · not-accessible · current The sub10EthMgmtQoSPCPTable index. This represents the PCP bits priority value. sub10EthMgmtQoSPCPIndex(1)=PCPBit(0) sub10EthMgmtQoSPCPIndex(2)=PCPBit(1) sub10EthMgmtQoSPCPIndex(3)=PCPBit(2) sub10EthMgmtQoSPCPIndex(4)=PCPBit(3) sub10EthMgmtQoSPCPIndex(5)=PCPBit(4) sub10EthMgmtQoSPCPIndex(6)=PCPBit(5) sub10EthMgmtQoSPCPIndex(7)=PCPBit(6) sub10EthMgmtQoSPCPIndex(8)=PCPBit(7) | ||||
| Csub10EthMgmtQoSPCPQueue | 1.3.6.1.4.1.39003.4.2.3.8.1.2 | Sub10QoSQueue | RW | |
column · Sub10QoSQueue · read-write · current The queue number in the sub10EthMgmtQoSQTable which identifies the specific queue where the packets tagged with the specific PCP bit sub10EthMgmtQoSPCPIndex are inserted. There are up to 8 queues. | ||||
| Ssub10EthMgmtQoSDSCPMappingNumber | 1.3.6.1.4.1.39003.4.2.3.9 | Unsigned32 (0..64) | RO | |
scalar · Unsigned32 (0..64) · read-only · current The number of sub10EthMgmtQoSDSCPMappingTable table entries present on this system. | ||||
| Tsub10EthMgmtQoSDSCPTable | 1.3.6.1.4.1.39003.4.2.3.10 | NA | ||
table · not-accessible · current This table configures the Quality of Service Differentiated Services Code Point (DSCP) to queue mapping. Multiple DSCPs may be mapped to the same queue but the same DSCP cannot be mapped to more than one queue. This table has a maximum size of 64 with 1 entry per DSCP value. On egress of the ethernet interface all pkts tagged with the specific DSCP marking in the IP header will be inserted onto the specified queue. See sub10EthMgmtQoSQTable for more information on QoS queueing. The number of entries in the table is given by the value of sub10EthMgmtQoSDSCPMappingNumber (maximum 64). | ||||
| Rsub10EthMgmtQoSDSCPEntry | 1.3.6.1.4.1.39003.4.2.3.10.1 | NA | ||
row · not-accessible · current An entry (row) in the sub10EthMgmtQoSDSCPMappingTable. | ||||
| Csub10EthMgmtQoSDSCPIndex | 1.3.6.1.4.1.39003.4.2.3.10.1.1 | Unsigned32 (1..64) | NA | |
column · Unsigned32 (1..64) · not-accessible · current The sub10EthMgmtQoSDSCPTable index. | ||||
| Csub10EthMgmtQoSDSCPMarking | 1.3.6.1.4.1.39003.4.2.3.10.1.2 | Unsigned32 (0..63) | RW | |
column · Unsigned32 (0..63) · read-write · current The DSCP value used as an index to the table. This defines the DSCP value which when egressing through the ethernet interface is placed on the queue specified by sub10EthMgmtQoSVlanQueueIndex. | ||||
| Csub10EthMgmtQoSDSCPQueue | 1.3.6.1.4.1.39003.4.2.3.10.1.3 | Sub10QoSQueue | RW | |
column · Sub10QoSQueue · read-write · current The queue number in the sub10EthMgmtQoSQTable which identifies the specific queue where the packets tagged with the specific DSCP marking sub10EthMgmtQoSDSCP are inserted. | ||||
| Ssub10EthMgmtQoSMPLSMappingNumber | 1.3.6.1.4.1.39003.4.2.3.11 | Unsigned32 (0..64) | RO | |
scalar · Unsigned32 (0..64) · read-only · current The number of sub10EthMgmtQoSMPLSMappingTable table entries present on this system.This is equivelent to the number of MPLS Traffic classes | ||||
| Tsub10EthMgmtQoSMPLSTable | 1.3.6.1.4.1.39003.4.2.3.12 | NA | ||
table · not-accessible · current This table configures the Quality of Service Multi-Protocol Label Switching protocol (MPLS) Traffic Class (TC) to queue mapping. Multiple MPLS TCs may be mapped to the same queue but the same MPLS TC cannot be mapped to more than one queue. This table has a maximum size of 64 with 1 entry per MPLS TC value. On egress of the ethernet interface all pkts tagged with the specific MPLS TC in the IP header will be inserted onto the specified queue. See sub10EthMgmtQoSQTable for more information on QoS queueing. The number of entries in the table is given by the value of sub10EthMgmtQoSMPLSMappingNumber (maximum 8). | ||||
| Rsub10EthMgmtQoSMPLSEntry | 1.3.6.1.4.1.39003.4.2.3.12.1 | NA | ||
row · not-accessible · current An entry (row) in the sub10EthMgmtQoSMPLSMappingTable. | ||||
| Csub10EthMgmtQoSMPLSIndex | 1.3.6.1.4.1.39003.4.2.3.12.1.1 | Unsigned32 (1..8) | NA | |
column · Unsigned32 (1..8) · not-accessible · current The sub10EthMgmtQoSMPLSMappingTable index. | ||||
| Csub10EthMgmtQoSMPLSTrafficClass | 1.3.6.1.4.1.39003.4.2.3.12.1.2 | Unsigned32 (0..7) | RW | |
column · Unsigned32 (0..7) · read-write · current The MPLS Traffic Class value used as an index to the table. This defines the MPLS TC value which when egressing through the ethernet interface is placed on the queue specified by sub10EthMgmtQoSVlanQueueIndex. | ||||
| Csub10EthMgmtQoSMPLSQueue | 1.3.6.1.4.1.39003.4.2.3.12.1.3 | Sub10QoSQueue | RW | |
column · Sub10QoSQueue · read-write · current The queue number in the sub10EthMgmtQoSQTable which identifies the specific queue where the packets tagged with the specific MPLS Traffic Class sub10EthMgmtQoSMPLSTrafficClass are inserted. | ||||
| Nsub10EthMgmtStats | 1.3.6.1.4.1.39003.4.2.4 | |||
| Tsub10EthMgmtStatsActiveTable | 1.3.6.1.4.1.39003.4.2.4.1 | NA | ||
table · not-accessible · current This table maintains an entry for each Ethernet statistic that is enabled and active. | ||||
| Rsub10EthMgmtStatsActiveEntry | 1.3.6.1.4.1.39003.4.2.4.1.1 | NA | ||
row · not-accessible · current An entry in the sub10EthMgmtStatsActiveTable. Each entry represents an object instance of ethernet stats and it's current state. | ||||
| Csub10EthMgmtStatsActiveIndex | 1.3.6.1.4.1.39003.4.2.4.1.1.1 | Unsigned32 (1..30) | NA | |
column · Unsigned32 (1..30) · not-accessible · current The number of ethernet stats objects used as an index to this table. | ||||
| Csub10EthMgmtStatsActiveName | 1.3.6.1.4.1.39003.4.2.4.1.1.2 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The stats object name. This is the name of the ethernet stats object in the sub10EthernetStatsCurrent group. | ||||
| Csub10EthMgmtStatsActiveState | 1.3.6.1.4.1.39003.4.2.4.1.1.3 | Sub10State | RW | |
column · Sub10State · read-write · current If set to 'enabled' the statistic is active. | ||||
| Nsub10EthernetStats | 1.3.6.1.4.1.39003.4.3 | |||
| Ssub10EthStatsTimeElapsed | 1.3.6.1.4.1.39003.4.3.1 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The time that has elapsed from the beginning of the statistical measurement period. This is normally time from just after the last reboot time when the statistics module begins it's calculations. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value. | ||||
| Nsub10EthernetStatsCurrent | 1.3.6.1.4.1.39003.4.3.2 | |||
| Tsub10EthernetStatsCurrTable | 1.3.6.1.4.1.39003.4.3.2.1 | NA | ||
table · not-accessible · current This table defines the current stats objects of the ethernet interface. | ||||
| Rsub10EthernetStatsCurrEntry | 1.3.6.1.4.1.39003.4.3.2.1.1 | NA | ||
row · not-accessible · current An entry (row) in the sub10EthernetStatsCurrTable.
| ||||
| Csub10EthStatsCurrRxOctets | 1.3.6.1.4.1.39003.4.3.2.1.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current The number of octets received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrRxGoodFrms | 1.3.6.1.4.1.39003.4.3.2.1.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The number of good frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrRxBcastFrms | 1.3.6.1.4.1.39003.4.3.2.1.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The number of broadcast frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrRxMcastFrms | 1.3.6.1.4.1.39003.4.3.2.1.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The number of multicast frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrRxPauseFrms | 1.3.6.1.4.1.39003.4.3.2.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The number of Pause frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrRxCRCErrs | 1.3.6.1.4.1.39003.4.3.2.1.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The number of CRC errors received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrRxAlignErrs | 1.3.6.1.4.1.39003.4.3.2.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The number of Alignment coding errors received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrRxOversized | 1.3.6.1.4.1.39003.4.3.2.1.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The number of Oversized frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrRxJabberFrms | 1.3.6.1.4.1.39003.4.3.2.1.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The number of Jabber frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrRxUndersized | 1.3.6.1.4.1.39003.4.3.2.1.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The number of Undersized frames received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrRxFragments | 1.3.6.1.4.1.39003.4.3.2.1.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The number of frame fragments received over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrRxSOFOvrns | 1.3.6.1.4.1.39003.4.3.2.1.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The number of frames with Start of Frame (SOF) Overruns received over the Ethernet interface or were dropped due to FIFO resource limitations since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrTxOctets | 1.3.6.1.4.1.39003.4.3.2.1.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The number of octets transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrTxGoodFrms | 1.3.6.1.4.1.39003.4.3.2.1.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current The number of ethernet frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrTxBcastFrms | 1.3.6.1.4.1.39003.4.3.2.1.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The number of broadcast frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrTxMcastFrms | 1.3.6.1.4.1.39003.4.3.2.1.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current The number of multicast frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrTxPauseFrms | 1.3.6.1.4.1.39003.4.3.2.1.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current The number of Pause frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrTxDeferred | 1.3.6.1.4.1.39003.4.3.2.1.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current The number of Deferred frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrTxCollsn | 1.3.6.1.4.1.39003.4.3.2.1.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current The number of Collision frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrTxSnglCollsn | 1.3.6.1.4.1.39003.4.3.2.1.1.20 | Counter32 | RO | |
column · Counter32 · read-only · current The number of Single Collision frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrTxMlplCollsn | 1.3.6.1.4.1.39003.4.3.2.1.1.21 | Counter32 | RO | |
column · Counter32 · read-only · current The number of Multiple Collision frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrTxExsvCollsn | 1.3.6.1.4.1.39003.4.3.2.1.1.22 | Counter32 | RO | |
column · Counter32 · read-only · current The number of Excessive Collision for which transmission was abandoned over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrTxLtCollsn | 1.3.6.1.4.1.39003.4.3.2.1.1.23 | Counter32 | RO | |
column · Counter32 · read-only · current The number of Late Collision for which transmission was abandoned over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrTxCSenseErrs | 1.3.6.1.4.1.39003.4.3.2.1.1.24 | Counter32 | RO | |
column · Counter32 · read-only · current The number of Carrier Sense Errored frames transmitted over the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrPkts64Octets | 1.3.6.1.4.1.39003.4.3.2.1.1.25 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of 64-byte frames received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrPkts65T127 | 1.3.6.1.4.1.39003.4.3.2.1.1.26 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of frames of size 65 to 127 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrPkts128T255 | 1.3.6.1.4.1.39003.4.3.2.1.1.27 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of frames of size 128 to 255 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrPkts256T511 | 1.3.6.1.4.1.39003.4.3.2.1.1.28 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of frames of size 256 to 511 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrPkts512T1023 | 1.3.6.1.4.1.39003.4.3.2.1.1.29 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of frames of size 512 to 1023 bytes received and transmitted on the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrPkts1024TMax | 1.3.6.1.4.1.39003.4.3.2.1.1.30 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of frames of size 1024 to RX_MAXLEN bytes for receive or 1024 up for transmit on the Ethernet interface since the last power cycle / reset of the unit. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStatsCurrRxMbps | 1.3.6.1.4.1.39003.4.3.2.1.1.31 | Sub10ThroughputMbps | RO | |
column · Sub10ThroughputMbps · read-only · current The Rx throughput in Mbps in this second. | ||||
| Csub10EthStatsCurrTxMbps | 1.3.6.1.4.1.39003.4.3.2.1.1.32 | Sub10ThroughputMbps | RO | |
column · Sub10ThroughputMbps · read-only · current The Tx throughput in Mbps in this second. | ||||
| Csub10EthStatsCurrRxMbpsMin | 1.3.6.1.4.1.39003.4.3.2.1.1.33 | Sub10ThroughputMbps | RO | |
column · Sub10ThroughputMbps · read-only · current The minimum Rx throughput in Mbps in the last rolling minute. | ||||
| Csub10EthStatsCurrRxMbpsMax | 1.3.6.1.4.1.39003.4.3.2.1.1.34 | Sub10ThroughputMbps | RO | |
column · Sub10ThroughputMbps · read-only · current The maximum Rx throughput in Mbps in the last rolling minute. | ||||
| Csub10EthStatsCurrRxMbpsAvg | 1.3.6.1.4.1.39003.4.3.2.1.1.35 | Sub10ThroughputMbps | RO | |
column · Sub10ThroughputMbps · read-only · current The average Rx throughput in Mbps in the last rolling minute. | ||||
| Csub10EthStatsCurrTxMbpsMin | 1.3.6.1.4.1.39003.4.3.2.1.1.36 | Sub10ThroughputMbps | RO | |
column · Sub10ThroughputMbps · read-only · current The minimum Tx throughput in Mbps in the last rolling minute. | ||||
| Csub10EthStatsCurrTxMbpsMax | 1.3.6.1.4.1.39003.4.3.2.1.1.37 | Sub10ThroughputMbps | RO | |
column · Sub10ThroughputMbps · read-only · current The maximum Tx throughput in Mbps in the last rolling minute. | ||||
| Csub10EthStatsCurrTxMbpsAvg | 1.3.6.1.4.1.39003.4.3.2.1.1.38 | Sub10ThroughputMbps | RO | |
column · Sub10ThroughputMbps · read-only · current The average Tx throughput in Mbps in the last rolling minute. | ||||
| Csub10EthStatsCurrRmtRxMbpsAvg | 1.3.6.1.4.1.39003.4.3.2.1.1.39 | Sub10ThroughputMbps | RO | |
column · Sub10ThroughputMbps · read-only · current The average Rx throughput of the remote unit in Mbps in the last rolling minute. | ||||
| Csub10EthStatsCurrRmtTxMbpsAvg | 1.3.6.1.4.1.39003.4.3.2.1.1.40 | Sub10ThroughputMbps | RO | |
column · Sub10ThroughputMbps · read-only · current The average Tx throughput of the remote unit in Mbps in the last rolling minute. | ||||
| Nsub10EthernetStatsHistory | 1.3.6.1.4.1.39003.4.3.3 | |||
| Nsub10EthernetStats15mHistory | 1.3.6.1.4.1.39003.4.3.3.1 | |||
| Ssub10EthStats15mHistIntvls | 1.3.6.1.4.1.39003.4.3.3.1.1 | Unsigned32 (0..96) | RO | |
scalar · Unsigned32 (0..96) · read-only · current The number of valid table entries in sub10EthStats15mHistTable on this system. There is one entry per 15 minute interval. If the unit has been running for a minimum of 24 hours and collecting valid data then the number of entries will be 96, this represents a total maximum of 24 hours worth of data. | ||||
| Tsub10EthStats15mHistTable | 1.3.6.1.4.1.39003.4.3.3.1.2 | NA | ||
table · not-accessible · current This table maintains a history of Ethernet statistics based on 15 minute intervals. There are a maximum of 96 intervals which represent 24 hours of data. This table along with the 1m and 1d tables provide a history of the performance of the radio interface. This information may then be post processed and used as a troubleshooting tool. An entry in the table represents a 15 minute interval where each interval is synchronised to the clock on the hour. There are up to 96 intervals starting at 1. The number of valid entries in the table is given by the value of sub10EthStats15mHistIntvls of which the minimum is 0 and the maximum is 96 therefore providing up to a maximum of 24 hours of 15 minute interval data. The first entry indexed by 1 represents the most recent completed 15 minute interval. At the end of each interval all entries of 'index' are copied into entry 'index+1'. If the number of valid intervals is 96 then the least recent interval entry is summarised into 24 hour stats and then discarded. | ||||
| Rsub10EthStats15mHistEntry | 1.3.6.1.4.1.39003.4.3.3.1.2.1 | NA | ||
row · not-accessible · current An entry in the sub10EthStats15mHistTable. Each entry represents 15 minute of performance management data where the first entry with index=1 is the most recent 15 minute interval and the last entry with index=n (up to 96) is the least recent 15 minute interval. The number of valid intervals is sub10EthStats15mHistIntvls. | ||||
| Csub10EthStats15mHistIntvl | 1.3.6.1.4.1.39003.4.3.3.1.2.1.1 | Unsigned32 (1..96) | NA | |
column · Unsigned32 (1..96) · not-accessible · current The interval number used as an index to this table. Interval numbers start at 1 (the most recent 15 minute interval) and have a maximum value of 96 (the least recent 15 minute interval). | ||||
| Csub10EthStats15mHistTime | 1.3.6.1.4.1.39003.4.3.3.1.2.1.2 | Sub10DateTime | RO | |
column · Sub10DateTime · read-only · current The local system time when this 15m history entry was created. This represents the end of the 15 minute interval for which the associated stats with the same sub10EthStats15mHistIntvl table index are relevant. | ||||
| Csub10EthStats15mHistRxOctets | 1.3.6.1.4.1.39003.4.3.3.1.2.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current The number of octets received over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistRxGoodFrms | 1.3.6.1.4.1.39003.4.3.3.1.2.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current The number of good frames received over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistRxBcastFrms | 1.3.6.1.4.1.39003.4.3.3.1.2.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current The number of broadcast frames received over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistRxMcastFrms | 1.3.6.1.4.1.39003.4.3.3.1.2.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current The number of multicast frames received over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistRxPauseFrms | 1.3.6.1.4.1.39003.4.3.3.1.2.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Pause frames received over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistRxCRCErrs | 1.3.6.1.4.1.39003.4.3.3.1.2.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current The number of CRC errors received over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistRxAlignErrs | 1.3.6.1.4.1.39003.4.3.3.1.2.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Alignment coding errors received over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistRxOversized | 1.3.6.1.4.1.39003.4.3.3.1.2.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Oversized frames received over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistRxJabberFrms | 1.3.6.1.4.1.39003.4.3.3.1.2.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Jabber frames received over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistRxUndersized | 1.3.6.1.4.1.39003.4.3.3.1.2.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Undersized frames received over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistRxFragments | 1.3.6.1.4.1.39003.4.3.3.1.2.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current The number of frame fragments received over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistRxSOFOvrns | 1.3.6.1.4.1.39003.4.3.3.1.2.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current The number of frames with Start of Frame (SOF) Overruns received over the Ethernet interface or were dropped due to FIFO resource limitations in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistTxOctets | 1.3.6.1.4.1.39003.4.3.3.1.2.1.15 | Counter64 | RO | |
column · Counter64 · read-only · current The number of octets transmitted over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistTxGoodFrms | 1.3.6.1.4.1.39003.4.3.3.1.2.1.16 | Counter64 | RO | |
column · Counter64 · read-only · current The number of ethernet frames transmitted over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistTxBcastFrms | 1.3.6.1.4.1.39003.4.3.3.1.2.1.17 | Counter64 | RO | |
column · Counter64 · read-only · current The number of broadcast frames transmitted over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistTxMcastFrms | 1.3.6.1.4.1.39003.4.3.3.1.2.1.18 | Counter64 | RO | |
column · Counter64 · read-only · current The number of multicast frames transmitted over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistTxPauseFrms | 1.3.6.1.4.1.39003.4.3.3.1.2.1.19 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Pause frames transmitted over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistTxDeferred | 1.3.6.1.4.1.39003.4.3.3.1.2.1.20 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Deferred frames transmitted over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistTxCollsn | 1.3.6.1.4.1.39003.4.3.3.1.2.1.21 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Collision frames transmitted over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistTxSnglCollsn | 1.3.6.1.4.1.39003.4.3.3.1.2.1.22 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Single Collision frames transmitted over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistTxMlplCollsn | 1.3.6.1.4.1.39003.4.3.3.1.2.1.23 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Multiple Collision frames transmitted over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistTxExsvCollsn | 1.3.6.1.4.1.39003.4.3.3.1.2.1.24 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Excessive Collision for which transmission was abandoned over the Ethernet interface in this 1 minute interval. 5 For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistTxLtCollsn | 1.3.6.1.4.1.39003.4.3.3.1.2.1.25 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Late Collision for which transmission was abandoned over the Ethernet interface in this 15 minute interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistTxCSenseErrs | 1.3.6.1.4.1.39003.4.3.3.1.2.1.26 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Carrier Sense Errored frames transmitted over the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistPkts64Octets | 1.3.6.1.4.1.39003.4.3.3.1.2.1.27 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of 64-byte frames received and transmitted on the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistPkts65T127 | 1.3.6.1.4.1.39003.4.3.3.1.2.1.28 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames of size 65 to 127 bytes received and transmitted on the Ethernet interface in this 15 minute interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistPkts128T255 | 1.3.6.1.4.1.39003.4.3.3.1.2.1.29 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames of size 128 to 255 bytes received and transmitted on the Ethernet interface in this 15 minute interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistPkts256T511 | 1.3.6.1.4.1.39003.4.3.3.1.2.1.30 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames of size 256 to 511 bytes received and transmitted on the Ethernet interface in this 15 minute interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistPkts512T1023 | 1.3.6.1.4.1.39003.4.3.3.1.2.1.31 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames of size 512 to 1023 bytes received and transmitted on the Ethernet interface in this 15 minute interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistPkts1024TMax | 1.3.6.1.4.1.39003.4.3.3.1.2.1.32 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames of size 1024 to RX_MAXLEN bytes for receive or 1024 up for transmit on the Ethernet interface in this 15m interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats15mHistRxMbpsMin | 1.3.6.1.4.1.39003.4.3.3.1.2.1.33 | Sub10ThroughputMbps | RO | |
column · Sub10ThroughputMbps · read-only · current The minimum Rx throughput in Mbps in this 15 minute interval. | ||||
| Csub10EthStats15mHistRxMbpsMax | 1.3.6.1.4.1.39003.4.3.3.1.2.1.34 | Sub10ThroughputMbps | RO | |
column · Sub10ThroughputMbps · read-only · current The maximum Rx throughput in Mbps in this 15 minute interval. | ||||
| Csub10EthStats15mHistRxMbpsAvg | 1.3.6.1.4.1.39003.4.3.3.1.2.1.35 | Sub10ThroughputMbps | RO | |
column · Sub10ThroughputMbps · read-only · current The average Rx throughput in Mbps in this 15 minute interval. | ||||
| Csub10EthStats15mHistTxMbpsMin | 1.3.6.1.4.1.39003.4.3.3.1.2.1.36 | Sub10ThroughputMbps | RO | |
column · Sub10ThroughputMbps · read-only · current The minimum Tx throughput in Mbps in this 15 minute interval. | ||||
| Csub10EthStats15mHistTxMbpsMax | 1.3.6.1.4.1.39003.4.3.3.1.2.1.37 | Sub10ThroughputMbps | RO | |
column · Sub10ThroughputMbps · read-only · current The maximum Tx throughput in Mbps in this 15 minute interval. | ||||
| Csub10EthStats15mHistTxMbpsAvg | 1.3.6.1.4.1.39003.4.3.3.1.2.1.38 | Sub10ThroughputMbps | RO | |
column · Sub10ThroughputMbps · read-only · current The average Tx throughput in Mbps in this 15 minute interval. | ||||
| Nsub10EthStats1dHistory | 1.3.6.1.4.1.39003.4.3.3.2 | |||
| Ssub10EthStats1dHistIntvls | 1.3.6.1.4.1.39003.4.3.3.2.1 | Unsigned32 (0..30) | RO | |
scalar · Unsigned32 (0..30) · read-only · current The number of valid table entries in sub10EthStats1dHistTable on this system. There is one entry per 1 day interval. If the unit has been running for a minimum of 30 days and collecting valid data then the number of entries will be 30, this represents a total maximum of 30 days worth of data. | ||||
| Tsub10EthStats1dHistTable | 1.3.6.1.4.1.39003.4.3.3.2.2 | NA | ||
table · not-accessible · current This table maintains a history of Radio statistics based on 1 day intervals. There are a maximum of 30 intervals which represent 30 days of data. This table along with the 1m and 15m tables provide a history of the performance of the radio interface. This information may then be post processed and used as a troubleshooting tool. An entry in the table represents a 1 day interval where each interval is synchronised to the clock on the hour. There are up to 30 intervals starting at 1. The number of valid entries in the table is given by the value of sub10EthStats1dHistIntvls of which the minimum is 0 and the maximum is 30 therefore providing up to a maximum of 30 days of 1 day interval data. The first entry indexed by 1 represents the most recent completed 1 day interval. At the end of each interval all entries of 'index' are copied into entry 'index+1'. If the number of valid intervals is 30 then the least recent interval entry is discarded. | ||||
| Rsub10EthStats1dHistEntry | 1.3.6.1.4.1.39003.4.3.3.2.2.1 | NA | ||
row · not-accessible · current An entry in the sub10EthStats1dHistTable. Each entry represents 1 day of performance management data where the first entry with index=1 is the most recent 1 day interval and the last entry with index=n (up to 30) is the least recent 1 day interval. The number of valid intervals is given by the value of sub10EthStats1dHistIntvls. | ||||
| Csub10EthStats1dHistIntvl | 1.3.6.1.4.1.39003.4.3.3.2.2.1.1 | Unsigned32 (1..30) | NA | |
column · Unsigned32 (1..30) · not-accessible · current The interval number used as an index to this table. Interval numbers start at 1 (the most recent 1 day interval) and have a maximum value of 30 (the least recent 1 day interval). | ||||
| Csub10EthStats1dHistTime | 1.3.6.1.4.1.39003.4.3.3.2.2.1.2 | Sub10DateTime | RO | |
column · Sub10DateTime · read-only · current The local system time when this 1d history entry was created. This represents the end of the 1 day interval for which the associated stats with the same sub10EthStats1dHistIntvl table index are relevant. | ||||
| Csub10EthStats1dHistRxOctets | 1.3.6.1.4.1.39003.4.3.3.2.2.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current The number of octets received over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistRxGoodFrms | 1.3.6.1.4.1.39003.4.3.3.2.2.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current The number of good frames received over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistRxBcastFrms | 1.3.6.1.4.1.39003.4.3.3.2.2.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current The number of broadcast frames received over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistRxMcastFrms | 1.3.6.1.4.1.39003.4.3.3.2.2.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current The number of multicast frames received over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistRxPauseFrms | 1.3.6.1.4.1.39003.4.3.3.2.2.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Pause frames received over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistRxCRCErrs | 1.3.6.1.4.1.39003.4.3.3.2.2.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current The number of CRC errors received over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistRxAlignErrs | 1.3.6.1.4.1.39003.4.3.3.2.2.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Alignment coding errors received over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistRxOversized | 1.3.6.1.4.1.39003.4.3.3.2.2.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Oversized frames received over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistRxJabberFrms | 1.3.6.1.4.1.39003.4.3.3.2.2.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Jabber frames received over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistRxUndersized | 1.3.6.1.4.1.39003.4.3.3.2.2.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Undersized frames received over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistRxFragments | 1.3.6.1.4.1.39003.4.3.3.2.2.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current The number of frame fragments received over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistRxSOFOvrns | 1.3.6.1.4.1.39003.4.3.3.2.2.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current The number of frames with Start of Frame (SOF) Overruns received over the Ethernet interface or were dropped due to FIFO resource limitations in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistTxOctets | 1.3.6.1.4.1.39003.4.3.3.2.2.1.15 | Counter64 | RO | |
column · Counter64 · read-only · current The number of octets transmitted over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistTxGoodFrms | 1.3.6.1.4.1.39003.4.3.3.2.2.1.16 | Counter64 | RO | |
column · Counter64 · read-only · current The number of ethernet frames transmitted over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistTxBcastFrms | 1.3.6.1.4.1.39003.4.3.3.2.2.1.17 | Counter64 | RO | |
column · Counter64 · read-only · current The number of broadcast frames transmitted over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistTxMcastFrms | 1.3.6.1.4.1.39003.4.3.3.2.2.1.18 | Counter64 | RO | |
column · Counter64 · read-only · current The number of multicast frames transmitted over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistTxPauseFrms | 1.3.6.1.4.1.39003.4.3.3.2.2.1.19 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Pause frames transmitted over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistTxDeferred | 1.3.6.1.4.1.39003.4.3.3.2.2.1.20 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Deferred frames transmitted over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistTxCollsn | 1.3.6.1.4.1.39003.4.3.3.2.2.1.21 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Collision frames transmitted over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistTxSnglCollsn | 1.3.6.1.4.1.39003.4.3.3.2.2.1.22 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Single Collision frames transmitted over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistTxMlplCollsn | 1.3.6.1.4.1.39003.4.3.3.2.2.1.23 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Multiple Collision frames transmitted over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistTxExsvCollsn | 1.3.6.1.4.1.39003.4.3.3.2.2.1.24 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Excessive Collision for which transmission was abandoned over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistTxLtCollsn | 1.3.6.1.4.1.39003.4.3.3.2.2.1.25 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Late Collision for which transmission was abandoned over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistTxCSenseErrs | 1.3.6.1.4.1.39003.4.3.3.2.2.1.26 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Carrier Sense Errored frames transmitted over the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistPkts64Octets | 1.3.6.1.4.1.39003.4.3.3.2.2.1.27 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of 64-byte frames received and transmitted on the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistPkts65T127 | 1.3.6.1.4.1.39003.4.3.3.2.2.1.28 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames of size 65 to 127 bytes received and transmitted on the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistPkts128T255 | 1.3.6.1.4.1.39003.4.3.3.2.2.1.29 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames of size 128 to 255 bytes received and transmitted on the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistPkts256T511 | 1.3.6.1.4.1.39003.4.3.3.2.2.1.30 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames of size 256 to 511 bytes received and transmitted on the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistPkts512T1023 | 1.3.6.1.4.1.39003.4.3.3.2.2.1.31 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames of size 512 to 1023 bytes received and transmitted on the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistPkts1024TMax | 1.3.6.1.4.1.39003.4.3.3.2.2.1.32 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames of size 1024 to RX_MAXLEN bytes for receive or 1024 up for transmit on the Ethernet interface in this 1 day interval. For more information refer to online techical documentation at http://www.ti.com. Product c667xDSP 'Gigabit Ethernet Switch Subsystem for KeyStone Devices User's Guide'. | ||||
| Csub10EthStats1dHistRxMbpsMin | 1.3.6.1.4.1.39003.4.3.3.2.2.1.33 | Sub10ThroughputMbps | RO | |
column · Sub10ThroughputMbps · read-only · current The minimum Rx throughput in Mbps in this 15 minute interval. | ||||
| Csub10EthStats1dHistRxMbpsMax | 1.3.6.1.4.1.39003.4.3.3.2.2.1.34 | Sub10ThroughputMbps | RO | |
column · Sub10ThroughputMbps · read-only · current The maximum Rx throughput in Mbps in this 15 minute interval. | ||||
| Csub10EthStats1dHistRxMbpsAvg | 1.3.6.1.4.1.39003.4.3.3.2.2.1.35 | Sub10ThroughputMbps | RO | |
column · Sub10ThroughputMbps · read-only · current The average Rx throughput in Mbps in this 1 day interval. | ||||
| Csub10EthStats1dHistTxMbpsMin | 1.3.6.1.4.1.39003.4.3.3.2.2.1.36 | Sub10ThroughputMbps | RO | |
column · Sub10ThroughputMbps · read-only · current The minimum Tx throughput in Mbps in this 1 day interval. | ||||
| Csub10EthStats1dHistTxMbpsMax | 1.3.6.1.4.1.39003.4.3.3.2.2.1.37 | Sub10ThroughputMbps | RO | |
column · Sub10ThroughputMbps · read-only · current The maximum Tx throughput in Mbps in this 1 day interval. | ||||
| Csub10EthStats1dHistTxMbpsAvg | 1.3.6.1.4.1.39003.4.3.3.2.2.1.38 | Sub10ThroughputMbps | RO | |
column · Sub10ThroughputMbps · read-only · current The average Tx throughput in Mbps in this 1 day interval. | ||||
| Nsub10Radio | 1.3.6.1.4.1.39003.5 | |||
| Nsub10RadioStatus | 1.3.6.1.4.1.39003.5.1 | |||
| Nsub10RadioLocalStatus | 1.3.6.1.4.1.39003.5.1.1 | |||
| Ssub10RadioLclLinkStatus | 1.3.6.1.4.1.39003.5.1.1.1 | Sub10RadioLinkState | RO | |
scalar · Sub10RadioLinkState · read-only · current The status of the local radio link. | ||||
| Ssub10RadioLclTxPower | 1.3.6.1.4.1.39003.5.1.1.2 | Integer32 (-30..30) | RO | |
scalar · Integer32 (-30..30) · read-only · current The current transmit power of the local radio link, measured in dBm.
| ||||
| Ssub10RadioLclRxPower | 1.3.6.1.4.1.39003.5.1.1.3 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The current receive power of the local radio link, measured in dBm.
| ||||
| Ssub10RadioLclVectErr | 1.3.6.1.4.1.39003.5.1.1.4 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The current vector error of the local radio link, measured in dB. | ||||
| Ssub10RadioLclLnkLoss | 1.3.6.1.4.1.39003.5.1.1.5 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The current link loss of the local radio link, measured in dB. | ||||
| Ssub10RadioLclAlignmentMode | 1.3.6.1.4.1.39003.5.1.1.6 | Sub10AlignmentMode | RO | |
scalar · Sub10AlignmentMode · read-only · current Alignment mode is modeAlignment(1) if the alignment / reset cap has been removed for > 5sec otherwise modeNormal(0). The alignment mode is managed using sub10RadioMgmtAlignmentMode. | ||||
| Ssub10RadioLclDataRate | 1.3.6.1.4.1.39003.5.1.1.7 | Sub10RadioDataRate | RO | |
scalar · Sub10RadioDataRate · read-only · current The maximum data rate of the Airside interface. | ||||
| Ssub10RadioLclMWUType | 1.3.6.1.4.1.39003.5.1.1.8 | Sub10MWUType | RO | |
scalar · Sub10MWUType · read-only · current The local MWU type | ||||
| Ssub10RadioLclAFER | 1.3.6.1.4.1.39003.5.1.1.9 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The Air Frame Error Ratio in the last second. This is the % of lost air frames based on the UFEC count in the previous second divided by the expected Air Frame Rate(AFR) in 1 second. | ||||
| Ssub10RadioLclRxModulationMode | 1.3.6.1.4.1.39003.5.1.1.10 | Sub10ModulationMode | RO | |
scalar · Sub10ModulationMode · read-only · current The current Receive Modulation Mode on the local unit. | ||||
| Ssub10RadioLclTxModulationMode | 1.3.6.1.4.1.39003.5.1.1.11 | Sub10ModulationMode | RO | |
scalar · Sub10ModulationMode · read-only · current The current Transmit Modulation Mode on the local unit. | ||||
| Nsub10RadioRemoteStatus | 1.3.6.1.4.1.39003.5.1.2 | |||
| Ssub10RadioRmtLinkStatus | 1.3.6.1.4.1.39003.5.1.2.1 | Sub10RadioLinkState | RO | |
scalar · Sub10RadioLinkState · read-only · current The status of the remote radio link. | ||||
| Ssub10RadioRmtTxPower | 1.3.6.1.4.1.39003.5.1.2.2 | Integer32 (-100..100) | RO | |
scalar · Integer32 (-100..100) · read-only · current The current transmit power of the remote radio link, measured in dBm.
| ||||
| Ssub10RadioRmtRxPower | 1.3.6.1.4.1.39003.5.1.2.3 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The current receive power of the remote radio link, measured in dBm.
| ||||
| Ssub10RadioRmtVectErr | 1.3.6.1.4.1.39003.5.1.2.4 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The current vector error of the remote radio link, measured in dB.
| ||||
| Ssub10RadioRmtLnkLoss | 1.3.6.1.4.1.39003.5.1.2.5 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The current link loss of the remote radio link, measured in dB.
| ||||
| Ssub10RadioRmtAlignmentMode | 1.3.6.1.4.1.39003.5.1.2.7 | Sub10AlignmentMode | RO | |
scalar · Sub10AlignmentMode · read-only · current The remote radio unit's Alignment mode. Alignment mode is modeAlignment(1) if the alignment / reset cap has been removed for > 5sec otherwise modeNormal(0). | ||||
| Ssub10RadioRmtAFER | 1.3.6.1.4.1.39003.5.1.2.8 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The remote unit Air Frame Error Ratio in this second. This is the % of lost air frames based on the UFEC count in the previous second divided by the expected Air Frame Rate(AFR) in 1 second. | ||||
| Nsub10RadioMgmt | 1.3.6.1.4.1.39003.5.2 | |||
| Ssub10RadioMgmtTxPowerLimit | 1.3.6.1.4.1.39003.5.2.1 | Sub10TxPowerLimit | RW | |
scalar · Sub10TxPowerLimit · read-write · current The configured transmit power of radio link. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2). | ||||
| Ssub10RadioMgmtTxRxFreq | 1.3.6.1.4.1.39003.5.2.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The configured TX/RX frequency pairs of radio link. Each enumerated option represents the TX and RX frequency pair settings in MHz. Options are available for E-Band at channel width 250MHz and 500MHz and E-Band channel width 500MHz. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).
| ||||
| Ssub10RadioMgmtAPCMode | 1.3.6.1.4.1.39003.5.2.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Automatic Transmit Power Control. The initial setting of transmit power used is defined by sub10RadioMgmtTxPower. If sub10RadioMgmtAPCMode is enabled then the transmit power may then vary according to the RSSI measured from the remote end of the link. The actual transmit power is readable in sub10RadioLclTxPower at the local end and sub10RadioRmtTxPower at the remote end of the link. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).
| ||||
| Ssub10RadioMgmtModulationMode | 1.3.6.1.4.1.39003.5.2.4 | Sub10ModulationMode | RW | |
scalar · Sub10ModulationMode · read-write · current Set the highest order Modulation Mode attempted by Adaptive Modulation. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2). | ||||
| Ssub10RadioMgmtAmod | 1.3.6.1.4.1.39003.5.2.5 | Sub10State | RW | |
scalar · Sub10State · read-write · current Adaptive Modulation mode. | ||||
| Ssub10RadioMgmtAlignmentMode | 1.3.6.1.4.1.39003.5.2.6 | Sub10AlignmentMode | RW | |
scalar · Sub10AlignmentMode · read-write · current Alignment mode is modeAlignment(1) if the alignment / reset cap has been removed for > 5sec otherwise modeNormal(0). The alignment mode can be manually changed by setting this object. | ||||
| Ssub10RadioMgmtMWUChannelWidth | 1.3.6.1.4.1.39003.5.2.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current MWU Channel width. IMPORTANT: This object is controlled by transaction management. Any changes to this object must be transactionally acknowledged following a successful set thus protecting against loss of communication with the unit. To acknowledge the transaction set the object sub10UnitMgmtTransaction to transactionCommit(2).
| ||||
| Nsub10RadioMgmtStats | 1.3.6.1.4.1.39003.5.2.9 | |||
| Ssub10RadioMgmtStats1dPersist | 1.3.6.1.4.1.39003.5.2.9.1 | Sub10State | RW | |
scalar · Sub10State · read-write · current If set to 'stateEnabled(1) the sub10RadioStats1dHistTable objects are stored and read in on startup. This makes the history non-volatile across unit resets. | ||||
| Tsub10RadioMgmtStatsActiveTable | 1.3.6.1.4.1.39003.5.2.9.4 | NA | ||
table · not-accessible · current This table maintains an entry for each Radio statistic that is enabled and active. | ||||
| Rsub10RadioMgmtStatsActiveEntry | 1.3.6.1.4.1.39003.5.2.9.4.1 | NA | ||
row · not-accessible · current An entry in the sub10RadioMgmtStatsActiveTable. Each entry represents an object instance of Radio stats and it's current state. | ||||
| Csub10RadioMgmtStatsActiveIndex | 1.3.6.1.4.1.39003.5.2.9.4.1.1 | Unsigned32 (1..29) | NA | |
column · Unsigned32 (1..29) · not-accessible · current The number of Radio stats objects used as an index to this table. | ||||
| Csub10RadioMgmtStatsActiveName | 1.3.6.1.4.1.39003.5.2.9.4.1.2 | OCTET STRING (SIZE (0..22)) | RO | |
column · OCTET STRING (SIZE (0..22)) · read-only · current The stats object name. This is the name of the ethernet stats object in the sub10RadioStatsCurrent group. | ||||
| Csub10RadioMgmtStatsActiveState | 1.3.6.1.4.1.39003.5.2.9.4.1.3 | Sub10State | RW | |
column · Sub10State · read-write · current If set to 'enabled' the statistic is active. | ||||
| Ssub10RadioMgmtDataRate | 1.3.6.1.4.1.39003.5.2.10 | Sub10RadioDataRate | RW | |
scalar · Sub10RadioDataRate · read-write · current The maximum data rate of the Airside interface up to the licensed value. | ||||
| Nsub10RadioStats | 1.3.6.1.4.1.39003.5.3 | |||
| Ssub10RadioStatsTimeElapsed | 1.3.6.1.4.1.39003.5.3.1 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The time that has elapsed from the beginning of the statistical measurement period. This is normally time from just after the last reboot time when the statistics module begins it's calculations. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value. | ||||
| Nsub10RadioStatsCurrent | 1.3.6.1.4.1.39003.5.3.2 | |||
| Ssub10RadioStatsCurrTxPowerMin | 1.3.6.1.4.1.39003.5.3.2.1 | Integer32 (-100..100) | RO | |
scalar · Integer32 (-100..100) · read-only · current The minimum value that the transmit power of the local radio link measured over the previous rolling 60 seconds.
| ||||
| Ssub10RadioStatsCurrTxPowerMax | 1.3.6.1.4.1.39003.5.3.2.2 | Integer32 (-100..100) | RO | |
scalar · Integer32 (-100..100) · read-only · current The maximum value that the transmit power of the local radio link measured over the previous rolling 60 seconds.
| ||||
| Ssub10RadioStatsCurrTxPowerAvg | 1.3.6.1.4.1.39003.5.3.2.3 | Integer32 (-100..100) | RO | |
scalar · Integer32 (-100..100) · read-only · current The average value of the transmit power of the local radio link measured over the previous rolling 60 seconds.
| ||||
| Ssub10RadioStatsCurrRxPowerMin | 1.3.6.1.4.1.39003.5.3.2.4 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The minimum value that the receive power of the local radio link measured over the previous rolling 60 seconds.
| ||||
| Ssub10RadioStatsCurrRxPowerMax | 1.3.6.1.4.1.39003.5.3.2.5 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The maximum value that the receive power of the local radio link measured over the previous rolling 60 seconds.
| ||||
| Ssub10RadioStatsCurrRxPowerAvg | 1.3.6.1.4.1.39003.5.3.2.6 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The average value of the receive power of the local radio link measured over the previous rolling 60 seconds.
| ||||
| Ssub10RadioStatsCurrVectErrMin | 1.3.6.1.4.1.39003.5.3.2.7 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The minimum value that the vector error of the local radio link measured over the previous rolling 60 seconds. | ||||
| Ssub10RadioStatsCurrVectErrMax | 1.3.6.1.4.1.39003.5.3.2.8 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The maximum value that the vector error of the local radio link measured over the previous rolling 60 seconds. | ||||
| Ssub10RadioStatsCurrVectErrAvg | 1.3.6.1.4.1.39003.5.3.2.9 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The average value of the vector error of the local radio link measured over the previous rolling 60 seconds. | ||||
| Ssub10RadioStatsCurrLnkLossMin | 1.3.6.1.4.1.39003.5.3.2.10 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The minimum value that the link loss of the local radio link measured over the previous rolling 60 seconds.
| ||||
| Ssub10RadioStatsCurrLnkLossMax | 1.3.6.1.4.1.39003.5.3.2.11 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The maximum value that the link loss of the local radio link measured over the previous rolling 60 seconds.
| ||||
| Ssub10RadioStatsCurrLnkLossAvg | 1.3.6.1.4.1.39003.5.3.2.12 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The average value of the link loss of the local radio link measured over the previous rolling 60 seconds.
| ||||
| Ssub10RadioStatsCurrRxFrms | 1.3.6.1.4.1.39003.5.3.2.13 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of Airside frames received over the Radio interface. This is irrespective of whether the Airside frame transmitted contained any ethernet data. Set to zero on unit reset. | ||||
| Ssub10RadioStatsCurrTxFrms | 1.3.6.1.4.1.39003.5.3.2.14 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of Airside frames transmitted over the Radio interface. This is irrespective of whether the Airside frame transmitted contained any ethernet data. Set to zero on unit reset. | ||||
| Ssub10RadioStatsCurrRxPkts | 1.3.6.1.4.1.39003.5.3.2.15 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of Ethernet packets received over the Radio interface. This includes all packets whether destined for the management sub-system on this unit or to be sent direct to the Ethernet interface. Set to zero on unit reset. | ||||
| Ssub10RadioStatsCurrTxPkts | 1.3.6.1.4.1.39003.5.3.2.16 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of Ethernet packets transmitted over the Radio interface which originated from the Ethernet interface. This does not include packets originating from the management sub-system. Set to zero on unit reset. | ||||
| Ssub10RadioStatsCurrRxMgmtPkts | 1.3.6.1.4.1.39003.5.3.2.17 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of Ethernet packets received over the Radio interface and which are destined for the management sub-system on this unit. Set to zero on unit reset. | ||||
| Ssub10RadioStatsCurrTxMgmtPkts | 1.3.6.1.4.1.39003.5.3.2.18 | Counter64 | RO | |
scalar · Counter64 · read-only · current The number of Ethernet packets transmitted over the Radio interface which originated from the management sub-system. This does not include packets originating from the Ethernet interface. Set to zero on unit reset. | ||||
| Ssub10RadioStatsCurrRxBadFrms | 1.3.6.1.4.1.39003.5.3.2.19 | Counter64 | RO | |
scalar · Counter64 · read-only · current The count of bad frames detected on the receive side of the Radio interface. A bad frame could be caused by any one of the following detected errors: UFEC Error Header CRC Error Frame CRC Error Bad header Set to zero on unit reset. | ||||
| Ssub10RadioStatsCurrMWUTempMin | 1.3.6.1.4.1.39003.5.3.2.24 | Integer32 (-100..100) | RO | |
scalar · Integer32 (-100..100) · read-only · current The minimum MWU temperature measured over the previous rolling 60 seconds. | ||||
| Ssub10RadioStatsCurrMWUTempMax | 1.3.6.1.4.1.39003.5.3.2.25 | Integer32 (-100..100) | RO | |
scalar · Integer32 (-100..100) · read-only · current The maximum MWU temperature measured over the previous rolling 60 seconds. | ||||
| Ssub10RadioStatsCurrMWUTempAvg | 1.3.6.1.4.1.39003.5.3.2.26 | Integer32 (-100..100) | RO | |
scalar · Integer32 (-100..100) · read-only · current The average MWU temperature measured over the previous rolling 60 seconds. | ||||
| Ssub10RadioStatsCurrQPSKTo8PSK | 1.3.6.1.4.1.39003.5.3.2.27 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number transitions of Modulation Mode configuration from QPSK to 8PSK since unit reboot. | ||||
| Ssub10RadioStatsCurr8PSKToQPSK | 1.3.6.1.4.1.39003.5.3.2.28 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number transitions of Modulation Mode configuration from 8PSK to QPSK since unit reboot. | ||||
| Ssub10RadioStatsCurrAFERMin | 1.3.6.1.4.1.39003.5.3.2.29 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The minimum AFER (Air Frame Error Ratio) in the previous rolling 60 seconds. See sub10RadioLclAFER. | ||||
| Ssub10RadioStatsCurrAFERMax | 1.3.6.1.4.1.39003.5.3.2.30 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The maximum AFER (Air Frame Error Ratio) in the previous rolling 60 seconds. See sub10RadioLclAFER. | ||||
| Ssub10RadioStatsCurrAFERAvg | 1.3.6.1.4.1.39003.5.3.2.31 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The average AFER (Air Frame Error Ratio) in the previous rolling 60 seconds. See sub10RadioLclAFER. | ||||
| Ssub10RadioStatsCurrRmtTxPowerAvg | 1.3.6.1.4.1.39003.5.3.2.32 | Integer32 (-100..100) | RO | |
scalar · Integer32 (-100..100) · read-only · current The average value of the transmit power of the remote radio link measured over the previous rolling 60 seconds.
| ||||
| Ssub10RadioStatsCurrRmtRxPowerAvg | 1.3.6.1.4.1.39003.5.3.2.33 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The average value of the receive power of the remote radio link measured over the previous rolling 60 seconds.
| ||||
| Ssub10RadioStatsCurrRmtVectErrAvg | 1.3.6.1.4.1.39003.5.3.2.34 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The average value of the vector error of the remote radio link measured over the previous rolling 60 seconds. | ||||
| Ssub10RadioStatsCurrRmtLnkLossAvg | 1.3.6.1.4.1.39003.5.3.2.35 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The average value of the link loss of the remote radio link measured over the previous rolling 60 seconds.
| ||||
| Ssub10RadioStatsCurrRmtMWUTempAvg | 1.3.6.1.4.1.39003.5.3.2.36 | Integer32 (-100..100) | RO | |
scalar · Integer32 (-100..100) · read-only · current The average MWU temperature of the remote unit measured over the previous rolling 60 seconds. | ||||
| Ssub10RadioStatsCurrRmtAFERAvg | 1.3.6.1.4.1.39003.5.3.2.37 | OCTET STRING (SIZE (0..32)) | RO | |
scalar · OCTET STRING (SIZE (0..32)) · read-only · current The average AFER (Air Frame Error Ratio) of the remote unit in the previous rolling 60 seconds. | ||||
| Ssub10RadioStatsCurrRxQPSK | 1.3.6.1.4.1.39003.5.3.2.38 | Counter64 | RO | |
scalar · Counter64 · read-only · current The time in seconds that Rx modulation mode has been in QPSK since last reboot. | ||||
| Ssub10RadioStatsCurrRx8PSK | 1.3.6.1.4.1.39003.5.3.2.39 | Counter64 | RO | |
scalar · Counter64 · read-only · current The time in seconds that Rx modulation mode has been in 8PSK since last reboot. | ||||
| Ssub10RadioStatsCurrTxQPSK | 1.3.6.1.4.1.39003.5.3.2.40 | Counter64 | RO | |
scalar · Counter64 · read-only · current The time in seconds that Txmodulation mode has been in QPSK since last reboot. | ||||
| Ssub10RadioStatsCurrTx8PSK | 1.3.6.1.4.1.39003.5.3.2.41 | Counter64 | RO | |
scalar · Counter64 · read-only · current The time in seconds that Tx modulation mode has been in 8PSK since last reboot. | ||||
| Nsub10RadioStatsHistory | 1.3.6.1.4.1.39003.5.3.3 | |||
| Nsub10RadioStats1mHistory | 1.3.6.1.4.1.39003.5.3.3.1 | |||
| Ssub10RadioStats1mHistIntvls | 1.3.6.1.4.1.39003.5.3.3.1.1 | Unsigned32 (0..60) | RO | |
scalar · Unsigned32 (0..60) · read-only · current The number of valid table entries in sub10RadioStats1mHistTable on this system. There is one entry per 1 minute interval. If the unit has been running for a minimum of 15 minutes and collecting valid data then the number of entries will be 15, this represents a total maximum of 5 minutes worth of data. | ||||
| Tsub10RadioStats1mHistTable | 1.3.6.1.4.1.39003.5.3.3.1.2 | NA | ||
table · not-accessible · current This table maintains a history of Radio statistics based on 1 minute intervals. There are a maximum of 60 intervals which represent 1 hour of data. This table along with the 15m and 1d tables provide a history of the performance of the radio interface. This information may then be post processed and used as a troubleshooting tool. An entry in the table represents a 1 minute interval where each interval is synchronised to the clock on the hour. There are up to 60 intervals starting at 1. The number of valid entries in the table is given by the value of sub10RadioStats1mHistIntvls of which the minimum is 0 and the maximum is 60 therefore providing up to a maximum of 60 minutes of 1 minute interval data. The first entry indexed by 1 represents the most recent completed 1 minute interval. At the end of each interval all entries of 'index' are copied into entry 'index+1'. If the number of valid intervals is at least 15 then these 15 intervals are summarised into 15 minutes stats. At the end of a 60 minute period the least recent interval is discarded to accomodate the next minute interval. | ||||
| Rsub10RadioStats1mHistEntry | 1.3.6.1.4.1.39003.5.3.3.1.2.1 | NA | ||
row · not-accessible · current An entry in the sub10RadioStats1mHistTable. Each entry represents 1 minute of performance management data where the first entry with index=1 is the most recent 1 minute interval and the last entry with index=n (up to 60) is the least recent 1 minute interval. The number of valid intervals is given by the value of sub10RadioStats1mHistIntvls. | ||||
| Csub10RadioStats1mHistIntvl | 1.3.6.1.4.1.39003.5.3.3.1.2.1.1 | Unsigned32 (1..60) | NA | |
column · Unsigned32 (1..60) · not-accessible · current The interval number used as an index to this table. Interval numbers start at 1 (the most recent 1 minute interval) and have a maximum value of 60 (the least recent 1 minute interval). | ||||
| Csub10RadioStats1mHistTime | 1.3.6.1.4.1.39003.5.3.3.1.2.1.2 | Sub10DateTime | RO | |
column · Sub10DateTime · read-only · current The local system time when this 1m history entry was created. This represents the end of the 1 minute interval for which the associated stats with the same sub10RadioStats1mHistIntvl table index are relevant. | ||||
| Csub10RadioStats1mHistTxPowerMin | 1.3.6.1.4.1.39003.5.3.3.1.2.1.3 | Integer32 (-100..100) | RO | |
column · Integer32 (-100..100) · read-only · current The minimum value that the transmit power of the local radio link has reached in this minute interval, measured in dBm.
| ||||
| Csub10RadioStats1mHistTxPowerMax | 1.3.6.1.4.1.39003.5.3.3.1.2.1.4 | Integer32 (-100..100) | RO | |
column · Integer32 (-100..100) · read-only · current The maximum value that the transmit power of the local radio link has reached in this minute interval, measured in dBm.
| ||||
| Csub10RadioStats1mHistTxPowerAvg | 1.3.6.1.4.1.39003.5.3.3.1.2.1.5 | Integer32 (-100..100) | RO | |
column · Integer32 (-100..100) · read-only · current The average value that the transmit power of the local radio link has reached in this minute interval, measured in dBm.
| ||||
| Csub10RadioStats1mHistRxPowerMin | 1.3.6.1.4.1.39003.5.3.3.1.2.1.6 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The minimum value that the receive power of the local radio link has reached in this minute interval, measured in dBm.
| ||||
| Csub10RadioStats1mHistRxPowerMax | 1.3.6.1.4.1.39003.5.3.3.1.2.1.7 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The maximum value that the receive power of the local radio link has reached in this minute interval, measured in dBm.
| ||||
| Csub10RadioStats1mHistRxPowerAvg | 1.3.6.1.4.1.39003.5.3.3.1.2.1.8 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The average value that the receive power of the local radio link has reached in this minute interval, measured in dBm.
| ||||
| Csub10RadioStats1mHistVectErrMin | 1.3.6.1.4.1.39003.5.3.3.1.2.1.9 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The minimum value that the vector error of the local radio link has reached in this minute interval, measured in dB. | ||||
| Csub10RadioStats1mHistVectErrMax | 1.3.6.1.4.1.39003.5.3.3.1.2.1.10 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The maximum value that the vector error of the local radio link has reached in this minute interval, measured in dB. | ||||
| Csub10RadioStats1mHistVectErrAvg | 1.3.6.1.4.1.39003.5.3.3.1.2.1.11 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The average value that the vector error of the local radio link has reached in this minute interval, measured in dB. | ||||
| Csub10RadioStats1mHistLnkLossMin | 1.3.6.1.4.1.39003.5.3.3.1.2.1.12 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The minimum value that the link loss of the local radio link has reached in this minute interval, measured in dB.
| ||||
| Csub10RadioStats1mHistLnkLossMax | 1.3.6.1.4.1.39003.5.3.3.1.2.1.13 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The maximum value that the link loss of the local radio link has reached in this minute interval, measured in dB.
| ||||
| Csub10RadioStats1mHistLnkLossAvg | 1.3.6.1.4.1.39003.5.3.3.1.2.1.14 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The average value that the link loss of the local radio link has reached in this minute interval, measured in dB.
| ||||
| Csub10RadioStats1mHistMWUTempMin | 1.3.6.1.4.1.39003.5.3.3.1.2.1.15 | Integer32 (-100..100) | RO | |
column · Integer32 (-100..100) · read-only · current The minimum MWU temperature measured in this minute interval. | ||||
| Csub10RadioStats1mHistMWUTempMax | 1.3.6.1.4.1.39003.5.3.3.1.2.1.16 | Integer32 (-100..100) | RO | |
column · Integer32 (-100..100) · read-only · current The maximum MWU temperature measured in this minute interval. | ||||
| Csub10RadioStats1mHistMWUTempAvg | 1.3.6.1.4.1.39003.5.3.3.1.2.1.17 | Integer32 (-100..100) | RO | |
column · Integer32 (-100..100) · read-only · current The average MWU temperature measured in this minute interval. | ||||
| Csub10RadioStats1mHistRxFrms | 1.3.6.1.4.1.39003.5.3.3.1.2.1.22 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Airside frames received over the Radio interface in this minute. This is irrespective of whether the Airside frame transmitted contained any ethernet data. | ||||
| Csub10RadioStats1mHistTxFrms | 1.3.6.1.4.1.39003.5.3.3.1.2.1.23 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Airside frames transmitted over the Radio interface in this minute. This is irrespective of whether the Airside frame transmitted contained any ethernet data. | ||||
| Csub10RadioStats1mHistRxPkts | 1.3.6.1.4.1.39003.5.3.3.1.2.1.24 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Ethernet packets received over the Radio interface in this minute. This includes all packets whether destined for the management sub-system on this unit or to be sent direct to the Ethernet interface. | ||||
| Csub10RadioStats1mHistTxPkts | 1.3.6.1.4.1.39003.5.3.3.1.2.1.25 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Ethernet packets transmitted over the Radio interface which originated from the Ethernet interface in this minute. This does not include packets originating from the management sub-system. | ||||
| Csub10RadioStats1mHistRxMgmtPkts | 1.3.6.1.4.1.39003.5.3.3.1.2.1.26 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Ethernet packets received over the Radio interface in this minute and which are destined for the management sub-system on this unit. | ||||
| Csub10RadioStats1mHistTxMgmtPkts | 1.3.6.1.4.1.39003.5.3.3.1.2.1.27 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Ethernet packets transmitted over the Radio interface which originated from the management sub-system in this minute. This does not include packets originating from the Ethernet interface. | ||||
| Csub10RadioStats1mHistRxBadFrms | 1.3.6.1.4.1.39003.5.3.3.1.2.1.28 | Counter64 | RO | |
column · Counter64 · read-only · current The count of bad frames detected on the receive side of the Radio interface in this minute. | ||||
| Csub10RadioStats1mHistQPSKTo8PSK | 1.3.6.1.4.1.39003.5.3.3.1.2.1.29 | Counter32 | RO | |
column · Counter32 · read-only · current The number transitions of Modulation Mode configuration from QPSK to 8PSK in this 1 minute interval. | ||||
| Csub10RadioStats1mHist8PSKToQPSK | 1.3.6.1.4.1.39003.5.3.3.1.2.1.30 | Counter32 | RO | |
column · Counter32 · read-only · current The number transitions of Modulation Mode configuration from 8PSK to QPSK in this 1 minute interval. | ||||
| Csub10RadioStats1mHistAFERMin | 1.3.6.1.4.1.39003.5.3.3.1.2.1.31 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The minimum AFER (Air Frame Error Ratio) in this minute. See sub10RadioLclAFER. | ||||
| Csub10RadioStats1mHistAFERMax | 1.3.6.1.4.1.39003.5.3.3.1.2.1.32 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The maximum AFER (Air Frame Error Ratio) in this minute. See sub10RadioLclAFER. | ||||
| Csub10RadioStats1mHistAFERAvg | 1.3.6.1.4.1.39003.5.3.3.1.2.1.33 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The average AFER (Air Frame Error Ratio) in this minute. See sub10RadioLclAFER. | ||||
| Csub10RadioStats1mHistRxQPSK | 1.3.6.1.4.1.39003.5.3.3.1.2.1.34 | Counter32 | RO | |
column · Counter32 · read-only · current The time in seconds that the Rx Modulation Mode was QPSK in this 1 minute interval. | ||||
| Csub10RadioStats1mHistRx8PSK | 1.3.6.1.4.1.39003.5.3.3.1.2.1.35 | Counter32 | RO | |
column · Counter32 · read-only · current The time in seconds that the Rx Modulation Mode was 8PSK in this 1 minute interval. | ||||
| Csub10RadioStats1mHistTxQPSK | 1.3.6.1.4.1.39003.5.3.3.1.2.1.36 | Counter32 | RO | |
column · Counter32 · read-only · current The time in seconds that the Tx Modulation Mode was QPSK in this 1 minute interval. | ||||
| Csub10RadioStats1mHistTx8PSK | 1.3.6.1.4.1.39003.5.3.3.1.2.1.37 | Counter32 | RO | |
column · Counter32 · read-only · current The time in seconds that the Tx Modulation Mode was 8PSK in this 1 minute interval. | ||||
| Nsub10RadioStats15mHistory | 1.3.6.1.4.1.39003.5.3.3.2 | |||
| Ssub10RadioStats15mHistIntvls | 1.3.6.1.4.1.39003.5.3.3.2.1 | Unsigned32 (0..96) | RO | |
scalar · Unsigned32 (0..96) · read-only · current The number of valid table entries in sub10RadioStats15mHistTable on this system. There is one entry per 15 minute interval. If the unit has been running for a minimum of 24 hours and collecting valid data then the number of entries will be 96, this represents a total maximum of 24 hours worth of data. | ||||
| Tsub10RadioStats15mHistTable | 1.3.6.1.4.1.39003.5.3.3.2.2 | NA | ||
table · not-accessible · current This table maintains a history of Radio statistics based on 15 minute intervals. There are a maximum of 96 intervals which represent 24 hours of data. This table along with the 1m and 1d tables provide a history of the performance of the radio interface. This information may then be post processed and used as a troubleshooting tool. An entry in the table represents a 15 minute interval where each interval is synchronised to the clock on the hour. There are up to 96 intervals starting at 1. The number of valid entries in the table is given by the value of sub10RadioStats15mHistIntvls of which the minimum is 0 and the maximum is 96 therefore providing up to a maximum of 24 hours of 15 minute interval data. The first entry indexed by 1 represents the most recent completed 15 minute interval. At the end of each interval all entries of 'index' are copied into entry 'index+1'. If the number of valid intervals is 96 then the least recent interval entry is summarised into 24 hour stats and then discarded. | ||||
| Rsub10RadioStats15mHistEntry | 1.3.6.1.4.1.39003.5.3.3.2.2.1 | NA | ||
row · not-accessible · current An entry in the sub10RadioStats15mHistTable. Each entry represents 15 minutes performance management data where the first entry with index=1 is the most recent 15 minute interval and the last entry with index=n (up to 96) is the least recent 15 minute interval. The number of valid intervals is sub10RadioStats15mHistIntvls. | ||||
| Csub10RadioStats15mHistIntvl | 1.3.6.1.4.1.39003.5.3.3.2.2.1.1 | Unsigned32 (1..96) | NA | |
column · Unsigned32 (1..96) · not-accessible · current The interval number used as an index to this table. Interval numbers start at 1 (the most recent 15 minute interval) and have a maximum value of 96 (the least recent 15 minute interval). | ||||
| Csub10RadioStats15mHistTime | 1.3.6.1.4.1.39003.5.3.3.2.2.1.2 | Sub10DateTime | RO | |
column · Sub10DateTime · read-only · current The local system time when this 15m history entry was created. This represents the end of the 15 minute interval for which the associated stats with the same sub10RadioStats15mHistIntvl table index are relevant. | ||||
| Csub10RadioStats15mHistTxPowerMin | 1.3.6.1.4.1.39003.5.3.3.2.2.1.3 | Integer32 (-100..100) | RO | |
column · Integer32 (-100..100) · read-only · current The minimum value that the transmit power of the local radio link has reached in this 15 minute interval, measured in dBm.
| ||||
| Csub10RadioStats15mHistTxPowerMax | 1.3.6.1.4.1.39003.5.3.3.2.2.1.4 | Integer32 (-100..100) | RO | |
column · Integer32 (-100..100) · read-only · current The maximum value that the transmit power of the local radio link has reached in this 15 minute interval, measured in dBm.
| ||||
| Csub10RadioStats15mHistTxPowerAvg | 1.3.6.1.4.1.39003.5.3.3.2.2.1.5 | Integer32 (-100..100) | RO | |
column · Integer32 (-100..100) · read-only · current The average value that the transmit power of the local radio link has reached in this 15 minute interval, measured in dBm.
| ||||
| Csub10RadioStats15mHistRxPowerMin | 1.3.6.1.4.1.39003.5.3.3.2.2.1.6 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The minimum value that the receive power of the local radio link has reached in this 15 minute interval, measured in dBm.
| ||||
| Csub10RadioStats15mHistRxPowerMax | 1.3.6.1.4.1.39003.5.3.3.2.2.1.7 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The maximum value that the receive power of the local radio link has reached in this 15 minute interval, measured in dBm.
| ||||
| Csub10RadioStats15mHistRxPowerAvg | 1.3.6.1.4.1.39003.5.3.3.2.2.1.8 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The average value that the receive power of the local radio link has reached in this 15 minute interval, measured in dBm.
| ||||
| Csub10RadioStats15mHistVectErrMin | 1.3.6.1.4.1.39003.5.3.3.2.2.1.9 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The minimum value that the vector error of the local radio link has reached in this 15 minute interval, measured in dB. | ||||
| Csub10RadioStats15mHistVectErrMax | 1.3.6.1.4.1.39003.5.3.3.2.2.1.10 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The maximum value that the vector error of the local radio link has reached in this 15 minute interval, measured in dB. | ||||
| Csub10RadioStats15mHistVectErrAvg | 1.3.6.1.4.1.39003.5.3.3.2.2.1.11 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The average value that the vector error of the local radio link has reached in this 15 minute interval, measured in dB. | ||||
| Csub10RadioStats15mHistLnkLossMin | 1.3.6.1.4.1.39003.5.3.3.2.2.1.12 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The minimum value that the link loss of the local radio link has reached in this 15 minute interval, measured in dB.
| ||||
| Csub10RadioStats15mHistLnkLossMax | 1.3.6.1.4.1.39003.5.3.3.2.2.1.13 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The maximum value that the link loss of the local radio link has reached in this 15 minute interval, measured in dB.
| ||||
| Csub10RadioStats15mHistLnkLossAvg | 1.3.6.1.4.1.39003.5.3.3.2.2.1.14 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The average value that the link loss of the local radio link has reached in this 15 minute interval, measured in dB.
| ||||
| Csub10RadioStats15mHistMWUTempMin | 1.3.6.1.4.1.39003.5.3.3.2.2.1.15 | Integer32 (-100..100) | RO | |
column · Integer32 (-100..100) · read-only · current The minimum MWU temperature measured in this 15 minute interval. | ||||
| Csub10RadioStats15mHistMWUTempMax | 1.3.6.1.4.1.39003.5.3.3.2.2.1.16 | Integer32 (-100..100) | RO | |
column · Integer32 (-100..100) · read-only · current The maximum MWU temperature measured in this 15 minute interval. | ||||
| Csub10RadioStats15mHistMWUTempAvg | 1.3.6.1.4.1.39003.5.3.3.2.2.1.17 | Integer32 (-100..100) | RO | |
column · Integer32 (-100..100) · read-only · current The average MWU temperature measured in this 15 minute interval. | ||||
| Csub10RadioStats15mHistRxFrms | 1.3.6.1.4.1.39003.5.3.3.2.2.1.22 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Airside frames received over the Radio interface in this 15 minutes. This is irrespective of whether the Airside frame transmitted contained any ethernet data. | ||||
| Csub10RadioStats15mHistTxFrms | 1.3.6.1.4.1.39003.5.3.3.2.2.1.23 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Airside frames transmitted over the Radio interface in this 15 minutes. This is irrespective of whether the Airside frame transmitted contained any ethernet data. | ||||
| Csub10RadioStats15mHistRxPkts | 1.3.6.1.4.1.39003.5.3.3.2.2.1.24 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Ethernet packets received over the Radio interface in this 15 minutes. This includes all packets whether destined for the management sub-system on this unit or to be sent direct to the Ethernet interface. | ||||
| Csub10RadioStats15mHistTxPkts | 1.3.6.1.4.1.39003.5.3.3.2.2.1.25 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Ethernet packets transmitted over the Radio interface which originated from the Ethernet interface in this 15 minutes. This does not include packets originating from the management sub-system. | ||||
| Csub10RadioStats15mHistRxMgmtPkts | 1.3.6.1.4.1.39003.5.3.3.2.2.1.26 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Ethernet packets received over the Radio interface in this 15 minutes and which are destined for the management sub-system on this unit. | ||||
| Csub10RadioStats15mHistTxMgmtPkts | 1.3.6.1.4.1.39003.5.3.3.2.2.1.27 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Ethernet packets transmitted over the Radio interface which originated from the management sub-system in this 15 minutes. This does not include packets originating from the Ethernet interface. | ||||
| Csub10RadioStats15mHistRxBadFrms | 1.3.6.1.4.1.39003.5.3.3.2.2.1.28 | Counter64 | RO | |
column · Counter64 · read-only · current The count of bad frames detected on the receive side of the Radio interface in this 15 minutes. | ||||
| Csub10RadioStats15mHistQPSKTo8PSK | 1.3.6.1.4.1.39003.5.3.3.2.2.1.29 | Counter32 | RO | |
column · Counter32 · read-only · current The number transitions of Modulation Mode configuration from QPSK to 8PSK in this 15 minute interval. | ||||
| Csub10RadioStats15mHist8PSKToQPSK | 1.3.6.1.4.1.39003.5.3.3.2.2.1.30 | Counter32 | RO | |
column · Counter32 · read-only · current The number transitions of Modulation Mode configuration from 8PSK to QPSK in this 15 minute interval. | ||||
| Csub10RadioStats15mHistAFERMin | 1.3.6.1.4.1.39003.5.3.3.2.2.1.31 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The minimum AFER (Air Frame Error Ratio) in this 15 minute interval. See sub10RadioLclAFER. | ||||
| Csub10RadioStats15mHistAFERMax | 1.3.6.1.4.1.39003.5.3.3.2.2.1.32 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The maximum AFER (Air Frame Error Ratio) in this 15 minute interval. See sub10RadioLclAFER. | ||||
| Csub10RadioStats15mHistAFERAvg | 1.3.6.1.4.1.39003.5.3.3.2.2.1.33 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The average AFER (Air Frame Error Ratio) in this 15 minute interval. See sub10RadioLclAFER. | ||||
| Csub10RadioStats15mHistRxQPSK | 1.3.6.1.4.1.39003.5.3.3.2.2.1.34 | Counter32 | RO | |
column · Counter32 · read-only · current The time in seconds that the Rx Modulation Mode was QPSK in this 15 minute interval. | ||||
| Csub10RadioStats15mHistRx8PSK | 1.3.6.1.4.1.39003.5.3.3.2.2.1.35 | Counter32 | RO | |
column · Counter32 · read-only · current The time in seconds that the Rx Modulation Mode was 8PSK in this 15 minute interval. | ||||
| Csub10RadioStats15mHistTxQPSK | 1.3.6.1.4.1.39003.5.3.3.2.2.1.36 | Counter32 | RO | |
column · Counter32 · read-only · current The time in seconds that the Tx Modulation Mode was QPSK in this 15 minute interval. | ||||
| Csub10RadioStats15mHistTx8PSK | 1.3.6.1.4.1.39003.5.3.3.2.2.1.37 | Counter32 | RO | |
column · Counter32 · read-only · current The time in seconds that the Tx Modulation Mode was 8PSK in this 15 minute interval. | ||||
| Nsub10RadioStats1dHistory | 1.3.6.1.4.1.39003.5.3.3.3 | |||
| Ssub10RadioStats1dHistIntvls | 1.3.6.1.4.1.39003.5.3.3.3.1 | Unsigned32 (0..30) | RO | |
scalar · Unsigned32 (0..30) · read-only · current The number of valid table entries in sub10RadioStats1dHistTable on this system. There is one entry per 1 day interval. If the unit has been running for a minimum of 30 days and collecting valid data then the number of entries will be 30, this represents a total maximum of 30 days worth of data. | ||||
| Tsub10RadioStats1dHistTable | 1.3.6.1.4.1.39003.5.3.3.3.2 | NA | ||
table · not-accessible · current This table maintains a history of Radio statistics based on 1 day intervals. There are a maximum of 30 intervals which represent 30 days of data. This table along with the 1m and 15m tables provide a history of the performance of the radio interface. This information may then be post processed and used as a troubleshooting tool. An entry in the table represents a 1 day interval where each interval is synchronised to the clock on the hour. There are up to 30 intervals starting at 1. The number of valid entries in the table is given by the value of sub10RadioStats1dHistIntvls of which the minimum is 0 and the maximum is 30 therefore providing up to a maximum of 30 days of 1 day interval data. The first entry indexed by 1 represents the most recent completed 1 day interval. At the end of each interval all entries of 'index' are copied into entry 'index+1'. If the number of valid intervals is 30 then the least recent interval entry is discarded. | ||||
| Rsub10RadioStats1dHistEntry | 1.3.6.1.4.1.39003.5.3.3.3.2.1 | NA | ||
row · not-accessible · current An entry in the sub10RadioStats1dHistTable. Each entry represents 1 day of performance management data where the first entry with index=1 is the most recent 1 day interval and the last entry with index=n (up to 30) is the least recent 1 day interval. The number of valid intervals is given by the value of sub10RadioStats1dHistIntvls. | ||||
| Csub10RadioStats1dHistIntvl | 1.3.6.1.4.1.39003.5.3.3.3.2.1.1 | Unsigned32 (1..30) | NA | |
column · Unsigned32 (1..30) · not-accessible · current The interval number used as an index to this table. Interval numbers start at 1 (the most recent 1 day interval) and have a maximum value of 24 (the least recent 1 day interval). | ||||
| Csub10RadioStats1dHistTime | 1.3.6.1.4.1.39003.5.3.3.3.2.1.2 | Sub10DateTime | RO | |
column · Sub10DateTime · read-only · current The local system time when this 1d history entry was created. This represents the end of the 1 day interval for which the associated stats with the same sub10RadioStats1dHistIntvl table index are relevant. | ||||
| Csub10RadioStats1dHistTxPowerMin | 1.3.6.1.4.1.39003.5.3.3.3.2.1.3 | Integer32 (-100..100) | RO | |
column · Integer32 (-100..100) · read-only · current The minimum value that the transmit power of the local radio link has reached in this day interval, measured in dBm.
| ||||
| Csub10RadioStats1dHistTxPowerMax | 1.3.6.1.4.1.39003.5.3.3.3.2.1.4 | Integer32 (-100..100) | RO | |
column · Integer32 (-100..100) · read-only · current The maximum value that the transmit power of the local radio link has reached in this day interval, measured in dBm.
| ||||
| Csub10RadioStats1dHistTxPowerAvg | 1.3.6.1.4.1.39003.5.3.3.3.2.1.5 | Integer32 (-100..100) | RO | |
column · Integer32 (-100..100) · read-only · current The average value that the transmit power of the local radio link has reached in this day interval, measured in dBm.
| ||||
| Csub10RadioStats1dHistRxPowerMin | 1.3.6.1.4.1.39003.5.3.3.3.2.1.6 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The minimum value that the receive power of the local radio link has reached in this day interval, measured in dBm.
| ||||
| Csub10RadioStats1dHistRxPowerMax | 1.3.6.1.4.1.39003.5.3.3.3.2.1.7 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The maximum value that the receive power of the local radio link has reached in this day interval, measured in dBm.
| ||||
| Csub10RadioStats1dHistRxPowerAvg | 1.3.6.1.4.1.39003.5.3.3.3.2.1.8 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The average value that the receive power of the local radio link has reached in this day interval, measured in dBm.
| ||||
| Csub10RadioStats1dHistVectErrMin | 1.3.6.1.4.1.39003.5.3.3.3.2.1.9 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The minimum value that the vector error of the local radio link has reached in this day interval, measured in dB. | ||||
| Csub10RadioStats1dHistVectErrMax | 1.3.6.1.4.1.39003.5.3.3.3.2.1.10 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The maximum value that the vector error of the local radio link has reached in this day interval, measured in dB. | ||||
| Csub10RadioStats1dHistVectErrAvg | 1.3.6.1.4.1.39003.5.3.3.3.2.1.11 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The average value that the vector error of the local radio link has reached in this day interval, measured in dB. | ||||
| Csub10RadioStats1dHistLnkLossMin | 1.3.6.1.4.1.39003.5.3.3.3.2.1.12 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The minimum value that the link loss of the local radio link has reached in this day interval, measured in dB.
| ||||
| Csub10RadioStats1dHistLnkLossMax | 1.3.6.1.4.1.39003.5.3.3.3.2.1.13 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The maximum value that the link loss of the local radio link has reached in this day interval, measured in dB.
| ||||
| Csub10RadioStats1dHistLnkLossAvg | 1.3.6.1.4.1.39003.5.3.3.3.2.1.14 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The average value that the link loss of the local radio link has reached in this day interval, measured in dB.
| ||||
| Csub10RadioStats1dHistMWUTempMin | 1.3.6.1.4.1.39003.5.3.3.3.2.1.15 | Integer32 (-100..100) | RO | |
column · Integer32 (-100..100) · read-only · current The minimum MWU temperature measured in this day interval. | ||||
| Csub10RadioStats1dHistMWUTempMax | 1.3.6.1.4.1.39003.5.3.3.3.2.1.16 | Integer32 (-100..100) | RO | |
column · Integer32 (-100..100) · read-only · current The maximum MWU temperature measured in this day interval. | ||||
| Csub10RadioStats1dHistMWUTempAvg | 1.3.6.1.4.1.39003.5.3.3.3.2.1.17 | Integer32 (-100..100) | RO | |
column · Integer32 (-100..100) · read-only · current The average MWU temperature measured in this day interval. | ||||
| Csub10RadioStats1dHistRxFrms | 1.3.6.1.4.1.39003.5.3.3.3.2.1.22 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Airside frames received over the Radio interface in this day interval. This is irrespective of whether the Airside frame transmitted contained any ethernet data. | ||||
| Csub10RadioStats1dHistTxFrms | 1.3.6.1.4.1.39003.5.3.3.3.2.1.23 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Airside frames transmitted over the Radio interface in this day interval. This is irrespective of whether the Airside frame transmitted contained any ethernet data. | ||||
| Csub10RadioStats1dHistRxPkts | 1.3.6.1.4.1.39003.5.3.3.3.2.1.24 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Ethernet packets received over the Radio interface in this day interval. This includes all packets whether destined for the management sub-system on this unit or to be sent direct to the Ethernet interface. | ||||
| Csub10RadioStats1dHistTxPkts | 1.3.6.1.4.1.39003.5.3.3.3.2.1.25 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Ethernet packets transmitted over the Radio interface which originated from the Ethernet interface in this day interval. This does not include packets originating from the management sub-system. | ||||
| Csub10RadioStats1dHistRxMgmtPkts | 1.3.6.1.4.1.39003.5.3.3.3.2.1.26 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Ethernet packets received over the Radio interface in this day interval and which are destined for the management sub-system on this unit. | ||||
| Csub10RadioStats1dHistTxMgmtPkts | 1.3.6.1.4.1.39003.5.3.3.3.2.1.27 | Counter64 | RO | |
column · Counter64 · read-only · current The number of Ethernet packets transmitted over the Radio interface which originated from the management sub-system in this day interval. This does not include packets originating from the Ethernet interface. | ||||
| Csub10RadioStats1dHistRxBadFrms | 1.3.6.1.4.1.39003.5.3.3.3.2.1.28 | Counter64 | RO | |
column · Counter64 · read-only · current The count of bad frames detected on the receive side of the Radio interface in this day interval. | ||||
| Csub10RadioStats1dHistQPSKTo8PSK | 1.3.6.1.4.1.39003.5.3.3.3.2.1.29 | Counter64 | RO | |
column · Counter64 · read-only · current The number transitions of Modulation Mode configuration from QPSK to 8PSK in this 1 day interval. | ||||
| Csub10RadioStats1dHist8PSKToQPSK | 1.3.6.1.4.1.39003.5.3.3.3.2.1.30 | Counter64 | RO | |
column · Counter64 · read-only · current The number transitions of Modulation Mode configuration from 8PSK to QPSK in this 1 day interval. | ||||
| Csub10RadioStats1dHistAFERMin | 1.3.6.1.4.1.39003.5.3.3.3.2.1.31 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The minimum AFER (Air Frame Error Ratio) in this 1 day interval. See sub10RadioLclAFER. | ||||
| Csub10RadioStats1dHistAFERMax | 1.3.6.1.4.1.39003.5.3.3.3.2.1.32 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The maximum AFER (Air Frame Error Ratio) in this 1 day interval. See sub10RadioLclAFER. | ||||
| Csub10RadioStats1dHistAFERAvg | 1.3.6.1.4.1.39003.5.3.3.3.2.1.33 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The average AFER (Air Frame Error Ratio) in this 1 day interval. See sub10RadioLclAFER. | ||||
| Csub10RadioStats1dHistRxQPSK | 1.3.6.1.4.1.39003.5.3.3.3.2.1.34 | Counter32 | RO | |
column · Counter32 · read-only · current The time in seconds that the Rx Modulation Mode was QPSK in this 1 day interval. | ||||
| Csub10RadioStats1dHistRx8PSK | 1.3.6.1.4.1.39003.5.3.3.3.2.1.35 | Counter32 | RO | |
column · Counter32 · read-only · current The time in seconds that the Rx Modulation Mode was 8PSK in this 1 day interval. | ||||
| Csub10RadioStats1dHistTxQPSK | 1.3.6.1.4.1.39003.5.3.3.3.2.1.36 | Counter32 | RO | |
column · Counter32 · read-only · current The time in seconds that the Tx Modulation Mode was QPSK in this 1 day interval. | ||||
| Csub10RadioStats1dHistTx8PSK | 1.3.6.1.4.1.39003.5.3.3.3.2.1.37 | Counter32 | RO | |
column · Counter32 · read-only · current The time in seconds that the Tx Modulation Mode was 8PSK in this 1 day interval. | ||||
| Nsub10MIBConformance | 1.3.6.1.4.1.39003.20 | |||
| Nsub10MIBCompliances | 1.3.6.1.4.1.39003.20.1 | |||
| Msub10Compliance | 1.3.6.1.4.1.39003.20.1.1 | |||
compliance · current The compliance statement for Sub10 entities which implement the SUB10SYSTEMS-MIB.
| ||||
| Nsub10MIBGroups | 1.3.6.1.4.1.39003.20.2 | |||
| Gsub10NotificationsGrp | 1.3.6.1.4.1.39003.20.2.1 | |||
group · current This group defines objects that are members of the sub10NotificationsGrp group | ||||
| Gsub10UnitLocalStatusGrp | 1.3.6.1.4.1.39003.20.2.2 | |||
group · current This group defines objects that are members of the sub10UnitLocalStatusGrp group
| ||||
| Gsub10UnitLclAlarmStateEntryGrp | 1.3.6.1.4.1.39003.20.2.3 | |||
group · current This group defines objects that are members of the sub10UnitLclAlarmStateEntryGrp group | ||||
| Gsub10UnitRemoteStatusGrp | 1.3.6.1.4.1.39003.20.2.4 | |||
group · current This group defines objects that are members of the sub10UnitRemoteStatusGrp group | ||||
| Gsub10UnitMgmtSystemGrp | 1.3.6.1.4.1.39003.20.2.5 | |||
group · current This group defines objects that are members of the sub10UnitMgmtSystemGrp group | ||||
| Gsub10UnitMgmtIpGrp | 1.3.6.1.4.1.39003.20.2.6 | |||
group · current This group defines objects that are members of the sub10UnitMgmtIpGrp group | ||||
| Gsub10UnitMgmtVlanGrp | 1.3.6.1.4.1.39003.20.2.7 | |||
group · current This group defines objects that are members of the sub10UnitMgmtVlanGrp group | ||||
| Gsub10UnitMgmtUsersGrp | 1.3.6.1.4.1.39003.20.2.8 | |||
group · current This group defines objects that are members of the sub10UnitMgmtUsersGrp group
| ||||
| Gsub10UnitMgmtUserEntryGrp | 1.3.6.1.4.1.39003.20.2.9 | |||
group · current This group defines objects that are members of the sub10UnitMgmtUserEntryGrp group | ||||
| Gsub10UnitMgmtTimeGrp | 1.3.6.1.4.1.39003.20.2.10 | |||
group · current This group defines objects that are members of the sub10UnitMgmtTimeGrp group | ||||
| Gsub10UnitMgmtAlarmEntryGrp | 1.3.6.1.4.1.39003.20.2.11 | |||
group · current This group defines objects that are members of the sub10UnitMgmtAlarmEntryGrp group
| ||||
| Gsub10UnitMgmtAlarmsGrp | 1.3.6.1.4.1.39003.20.2.12 | |||
group · current This group defines objects that are members of the sub10UnitMgmtAlarmsGrp group | ||||
| Gsub10UnitMgmtSnmpGrp | 1.3.6.1.4.1.39003.20.2.13 | |||
group · current This group defines objects that are members of the sub10UnitMgmtSnmpGrp group
| ||||
| Gsub10UnitMgmtSnmpTrpDstEntryGrp | 1.3.6.1.4.1.39003.20.2.14 | |||
group · current This group defines objects that are members of the sub10UnitMgmtSnmpTrpDstEntryGrp group | ||||
| Gsub10UnitMgmtSnmpUserEntryGrp | 1.3.6.1.4.1.39003.20.2.15 | |||
group · current This group defines objects that are members of the sub10UnitMgmtSnmpUserEntryGrp group | ||||
| Gsub10UnitMgmtSnmpAccessEntryGrp | 1.3.6.1.4.1.39003.20.2.16 | |||
group · current This group defines objects that are members of the sub10UnitMgmtSnmpAccessEntryGrp group | ||||
| Gsub10UnitMgmtSnmpTargetEntryGrp | 1.3.6.1.4.1.39003.20.2.17 | |||
group · current This group defines objects that are members of the sub10UnitMgmtSnmpTargetEntryGrp group | ||||
| Gsub10UnitMgmtFirmwareGrp | 1.3.6.1.4.1.39003.20.2.18 | |||
group · current This group defines objects that are members of the sub10UnitMgmtFirmwareGrp group
| ||||
| Gsub10UnitMgmtFirmwareBankEntryGrp | 1.3.6.1.4.1.39003.20.2.19 | |||
group · current This group defines objects that are members of the sub10UnitMgmtFirmwareBankEntryGrp group | ||||
| Gsub10UnitMgmtDNSEntryGrp | 1.3.6.1.4.1.39003.20.2.20 | |||
group · current This group defines objects that are members of the sub10UnitMgmtDNSEntryGrp group
| ||||
| Gsub10UnitMgmtEncryptionGrp | 1.3.6.1.4.1.39003.20.2.21 | |||
group · current This group defines objects that are members of the sub10UnitMgmtEncryptionGrp group | ||||
| Gsub10UnitMgmtLicenseGrp | 1.3.6.1.4.1.39003.20.2.22 | |||
group · current This group defines objects that are members of the sub10UnitMgmtLicenseGrp group | ||||
| Gsub10UnitMgmtSyncEGrp | 1.3.6.1.4.1.39003.20.2.23 | |||
group · current This group defines objects that are members of the sub10UnitMgmtSyncEGrp group
| ||||
| Gsub10UnitMgmtActionsGrp | 1.3.6.1.4.1.39003.20.2.24 | |||
group · current This group defines objects that are members of the sub10UnitMgmtActionsGrp group | ||||
| Gsub10EthLclStatusEntryGrp | 1.3.6.1.4.1.39003.20.2.25 | |||
group · current This group defines objects that are members of the sub10EthLclStatusEntryGrp group | ||||
| Gsub10EthRmtStatusEntryGrp | 1.3.6.1.4.1.39003.20.2.26 | |||
group · current This group defines objects that are members of the sub10EthRmtStatusEntryGrp group | ||||
| Gsub10EthMgmtPhyEntryGrp | 1.3.6.1.4.1.39003.20.2.27 | |||
group · current This group defines objects that are members of the sub10EthMgmtPhyEntryGrp group | ||||
| Gsub10EthMgmtVlanGrp | 1.3.6.1.4.1.39003.20.2.28 | |||
group · current This group defines objects that are members of the sub10EthMgmtVlanGrp group | ||||
| Gsub10EthMgmtVlanAllowedEntryGrp | 1.3.6.1.4.1.39003.20.2.29 | |||
group · current This group defines objects that are members of the sub10EthMgmtVlanAllowedEntryGrp group | ||||
| Gsub10EthMgmtQoSGrp | 1.3.6.1.4.1.39003.20.2.30 | |||
group · current This group defines objects that are members of the sub10EthMgmtQoSGrp group | ||||
| Gsub10EthMgmtQoSQEntryGrp | 1.3.6.1.4.1.39003.20.2.31 | |||
group · current This group defines objects that are members of the sub10EthMgmtQoSQEntryGrp group | ||||
| Gsub10EthMgmtQoSVlanEntryGrp | 1.3.6.1.4.1.39003.20.2.32 | |||
group · current This group defines objects that are members of the sub10EthMgmtQoSVlanEntryGrp group | ||||
| Gsub10EthMgmtQoSPCPEntryGrp | 1.3.6.1.4.1.39003.20.2.33 | |||
group · current This group defines objects that are members of the sub10EthMgmtQoSPCPEntryGrp group
| ||||
| Gsub10EthMgmtQoSDSCPEntryGrp | 1.3.6.1.4.1.39003.20.2.34 | |||
group · current This group defines objects that are members of the sub10EthMgmtQoSDSCPEntryGrp group | ||||
| Gsub10EthMgmtQoSMPLSEntryGrp | 1.3.6.1.4.1.39003.20.2.35 | |||
group · current This group defines objects that are members of the sub10EthMgmtQoSMPLSEntryGrp group | ||||
| Gsub10EthMgmtStatsActiveEntryGrp | 1.3.6.1.4.1.39003.20.2.36 | |||
group · current This group defines objects that are members of the sub10EthMgmtStatsActiveEntryGrp group | ||||
| Gsub10EthernetStatsGrp | 1.3.6.1.4.1.39003.20.2.37 | |||
group · current This group defines objects that are members of the sub10EthernetStatsGrp group
| ||||
| Gsub10EthernetStatsCurrEntryGrp | 1.3.6.1.4.1.39003.20.2.38 | |||
group · current This group defines objects that are members of the sub10EthernetStatsCurrEntryGrp group
| ||||
| Gsub10EthernetStats15mHistoryGrp | 1.3.6.1.4.1.39003.20.2.39 | |||
group · current This group defines objects that are members of the sub10EthernetStats15mHistoryGrp group
| ||||
| Gsub10EthStats15mHistEntryGrp | 1.3.6.1.4.1.39003.20.2.40 | |||
group · current This group defines objects that are members of the sub10EthStats15mHistEntryGrp group
| ||||
| Gsub10EthStats1dHistoryGrp | 1.3.6.1.4.1.39003.20.2.41 | |||
group · current This group defines objects that are members of the sub10EthStats1dHistoryGrp group
| ||||
| Gsub10EthStats1dHistEntryGrp | 1.3.6.1.4.1.39003.20.2.42 | |||
group · current This group defines objects that are members of the sub10EthStats1dHistEntryGrp group
| ||||
| Gsub10RadioLocalStatusGrp | 1.3.6.1.4.1.39003.20.2.43 | |||
group · current This group defines objects that are members of the sub10RadioLocalStatusGrp group | ||||
| Gsub10RadioRemoteStatusGrp | 1.3.6.1.4.1.39003.20.2.44 | |||
group · current This group defines objects that are members of the sub10RadioRemoteStatusGrp group | ||||
| Gsub10RadioMgmtGrp | 1.3.6.1.4.1.39003.20.2.45 | |||
group · current This group defines objects that are members of the sub10RadioMgmtGrp group | ||||
| Gsub10RadioMgmtStatsGrp | 1.3.6.1.4.1.39003.20.2.46 | |||
group · current This group defines objects that are members of the sub10RadioMgmtStatsGrp group
| ||||
| Gsub10RadioMgmtStatsActiveEntryGrp | 1.3.6.1.4.1.39003.20.2.47 | |||
group · current This group defines objects that are members of the sub10RadioMgmtStatsActiveEntryGrp group | ||||
| Gsub10RadioStatsGrp | 1.3.6.1.4.1.39003.20.2.48 | |||
group · current This group defines objects that are members of the sub10RadioStatsGrp group
| ||||
| Gsub10RadioStatsCurrentGrp | 1.3.6.1.4.1.39003.20.2.49 | |||
group · current This group defines objects that are members of the sub10RadioStatsCurrentGrp group
| ||||
| Gsub10RadioStats1mHistoryGrp | 1.3.6.1.4.1.39003.20.2.50 | |||
group · current This group defines objects that are members of the sub10RadioStats1mHistoryGrp group
| ||||
| Gsub10RadioStats1mHistEntryGrp | 1.3.6.1.4.1.39003.20.2.51 | |||
group · current This group defines objects that are members of the sub10RadioStats1mHistEntryGrp group
| ||||
| Gsub10RadioStats15mHistoryGrp | 1.3.6.1.4.1.39003.20.2.52 | |||
group · current This group defines objects that are members of the sub10RadioStats15mHistoryGrp group
| ||||
| Gsub10RadioStats15mHistEntryGrp | 1.3.6.1.4.1.39003.20.2.53 | |||
group · current This group defines objects that are members of the sub10RadioStats15mHistEntryGrp group
| ||||
| Gsub10RadioStats1dHistoryGrp | 1.3.6.1.4.1.39003.20.2.54 | |||
group · current This group defines objects that are members of the sub10RadioStats1dHistoryGrp group
| ||||
| Gsub10RadioStats1dHistEntryGrp | 1.3.6.1.4.1.39003.20.2.55 | |||
group · current This group defines objects that are members of the sub10RadioStats1dHistEntryGrp group
| ||||
Textual conventions
Sub10AlarmIndexUnsigned32 (1..128)Display hint:
dThe MIB index used to define the range of indexing and size of the Alarm tables sub10UnitLclAlarmStateTable and sub10UnitMgmtAlarmTable.
Sub10AlarmNameOCTET STRING (SIZE (1..32))Display hint:
32aName convention for all notification types.
Sub10AlarmOperationINTEGERequal(5)greaterThan(2)greaterThanOrEqual(4)lessThan(1)lessThanOrEqual(3)notEqual(6)The operation that is used to compare a measured value with a configured alarm threshold which controls the raising and clearing of alarms.
Sub10AlarmSeverityINTEGERcritical(1)major(2)minor(3)warning(4)Severity for notifications of type alarm
Sub10AlarmStateINTEGERcleared(1)raised(2)stateUnknown(3)Alarm state.
Sub10AlarmTypeINTEGERsub10EthernetAlarm(2)sub10RadioAlarm(3)sub10UnitAlarm(1)The type of the alarm and defines the type of notification (trap) used to inform management entities.
Sub10AlignmentModeINTEGERmodeAlignment(1)modeNormal(0)Alignment mode is modeAlignment(1) if the alignment / reset cap has been removed for > 5sec otherwise modeNormal(0). The alignment mode is managed using sub10RadioMgmtAlignmentMode.
Sub10AlignmentModeLockINTEGERmodeLocked(1)modeUnlocked(0)If locked, the unit will not go into alignment mode when the alignment cap is removed.
Sub10AvailabilityINTEGERavailabilityHigh(0)availabilityLow(2)availabilityMedium(1)Availability selects RSSI thresholds for modulation changes.
Sub10DateTimeOCTET STRING (SIZE (19))Display hint:
19aThe generic Sub10 format for a date time string. Format is YYYY-MM-DD HH:MM:SS e.g. 2014-05-26 13:30:15
Sub10DuplexINTEGERfullDuplex(2)halfDuplex(1)unknownDuplex(3)The operation of a duplex link link
Sub10EntryStatusINTEGERentryInUse(1)entryNotInUse(2)A general configuration type to indicate if a table row is in use or not in use. This differs from RowStatus which is a settable object used to create the existence of a row in a configurable table. Sub10EntryStatus is intended to be read-only and is set internally by the Agent when a table row is populated with valid data.
Sub10EthInterfaceIndexUnsigned32 (1..2)Display hint:
dA unique value, greater than zero, for each ethernet type interface.
Sub10FirmwareBankUnsigned32 (1..3)Display hint:
dIdentifies the firmware bank number.
Sub10MDITypeINTEGERmdi(1)mdiUnknown(3)mdix(2)The operation of a duplex link link. The setting of 'auto' is used only for configuration puprposes.
Sub10MWUTypeINTEGERmwuTypeEBand(2)mwuTypeNone(0)mwuTypeVBand(1)The type of MWU.
Sub10MacAddressOCTET STRING (SIZE (11..17))Display hint:
17aMAC Address in readable string format.
Sub10MeasuredObjectINTEGERsub10EthStats15mHistPkts1024TMax(239)sub10EthStats15mHistPkts128T255(236)sub10EthStats15mHistPkts256T511(237)sub10EthStats15mHistPkts512T1023(238)sub10EthStats15mHistPkts64Octets(234)sub10EthStats15mHistPkts65T127(235)sub10EthStats15mHistRxAlignErrs(216)sub10EthStats15mHistRxBcastFrms(212)sub10EthStats15mHistRxCRCErrs(215)sub10EthStats15mHistRxFragments(220)sub10EthStats15mHistRxGoodFrms(211)sub10EthStats15mHistRxJabberFrms(218)sub10EthStats15mHistRxMbpsAvg(242)sub10EthStats15mHistRxMbpsMax(241)sub10EthStats15mHistRxMbpsMin(240)sub10EthStats15mHistRxMcastFrms(213)sub10EthStats15mHistRxOctets(210)sub10EthStats15mHistRxOversized(217)sub10EthStats15mHistRxPauseFrms(214)sub10EthStats15mHistRxSOFOvrns(221)sub10EthStats15mHistRxUndersized(219)sub10EthStats15mHistTxBcastFrms(224)sub10EthStats15mHistTxCSenseErrs(233)sub10EthStats15mHistTxCollsn(228)sub10EthStats15mHistTxDeferred(227)sub10EthStats15mHistTxExsvCollsn(231)sub10EthStats15mHistTxGoodFrms(223)sub10EthStats15mHistTxLtCollsn(232)sub10EthStats15mHistTxMbpsAvg(245)sub10EthStats15mHistTxMbpsMax(244)sub10EthStats15mHistTxMbpsMin(243)sub10EthStats15mHistTxMcastFrms(225)sub10EthStats15mHistTxMlplCollsn(230)sub10EthStats15mHistTxOctets(222)sub10EthStats15mHistTxPauseFrms(226)sub10EthStats15mHistTxSnglCollsn(229)sub10EthStats1dHistPkts1024TMax(329)sub10EthStats1dHistPkts128T255(326)sub10EthStats1dHistPkts256T511(327)sub10EthStats1dHistPkts512T1023(328)sub10EthStats1dHistPkts64Octets(324)sub10EthStats1dHistPkts65T127(325)sub10EthStats1dHistRxAlignErrs(306)sub10EthStats1dHistRxBcastFrms(302)sub10EthStats1dHistRxCRCErrs(305)sub10EthStats1dHistRxFragments(310)sub10EthStats1dHistRxGoodFrms(301)sub10EthStats1dHistRxJabberFrms(308)sub10EthStats1dHistRxMbpsAvg(332)sub10EthStats1dHistRxMbpsMax(331)sub10EthStats1dHistRxMbpsMin(330)sub10EthStats1dHistRxMcastFrms(303)sub10EthStats1dHistRxOctets(300)sub10EthStats1dHistRxOversized(307)sub10EthStats1dHistRxPauseFrms(304)sub10EthStats1dHistRxSOFOvrns(311)sub10EthStats1dHistRxUndersized(309)sub10EthStats1dHistTxBcastFrms(314)sub10EthStats1dHistTxCSenseErrs(323)sub10EthStats1dHistTxCollsn(318)sub10EthStats1dHistTxDeferred(317)sub10EthStats1dHistTxExsvCollsn(321)sub10EthStats1dHistTxGoodFrms(313)sub10EthStats1dHistTxLtCollsn(322)sub10EthStats1dHistTxMbpsAvg(335)sub10EthStats1dHistTxMbpsMax(334)sub10EthStats1dHistTxMbpsMin(333)sub10EthStats1dHistTxMcastFrms(315)sub10EthStats1dHistTxMlplCollsn(320)sub10EthStats1dHistTxOctets(312)sub10EthStats1dHistTxPauseFrms(316)sub10EthStats1dHistTxSnglCollsn(319)sub10EthStats1mHistPkts1024TMax(189)sub10EthStats1mHistPkts128T255(186)sub10EthStats1mHistPkts256T511(187)sub10EthStats1mHistPkts512T1023(188)sub10EthStats1mHistPkts64Octets(184)sub10EthStats1mHistPkts65T127(185)sub10EthStats1mHistRxAlignErrs(166)sub10EthStats1mHistRxBcastFrms(162)sub10EthStats1mHistRxCRCErrs(165)sub10EthStats1mHistRxFragments(170)sub10EthStats1mHistRxGoodFrms(161)sub10EthStats1mHistRxJabberFrms(168)sub10EthStats1mHistRxMbpsAvg(192)sub10EthStats1mHistRxMbpsMax(191)sub10EthStats1mHistRxMbpsMin(190)sub10EthStats1mHistRxMcastFrms(163)sub10EthStats1mHistRxOctets(160)sub10EthStats1mHistRxOversized(167)sub10EthStats1mHistRxPauseFrms(164)sub10EthStats1mHistRxSOFOvrns(171)sub10EthStats1mHistRxUndersized(169)sub10EthStats1mHistTxBcastFrms(174)sub10EthStats1mHistTxCSenseErrs(183)sub10EthStats1mHistTxCollsn(178)sub10EthStats1mHistTxDeferred(177)sub10EthStats1mHistTxExsvCollsn(181)sub10EthStats1mHistTxGoodFrms(173)sub10EthStats1mHistTxLtCollsn(182)sub10EthStats1mHistTxMbpsAvg(195)sub10EthStats1mHistTxMbpsMax(194)sub10EthStats1mHistTxMbpsMin(193)sub10EthStats1mHistTxMcastFrms(175)sub10EthStats1mHistTxMlplCollsn(180)sub10EthStats1mHistTxOctets(172)sub10EthStats1mHistTxPauseFrms(176)sub10EthStats1mHistTxSnglCollsn(179)sub10EthStatsCurrRxMbps(140)sub10EthStatsCurrRxMbpsAvg(144)sub10EthStatsCurrRxMbpsMax(143)sub10EthStatsCurrRxMbpsMin(142)sub10EthStatsCurrTxMbps(141)sub10EthStatsCurrTxMbpsAvg(147)sub10EthStatsCurrTxMbpsMax(146)sub10EthStatsCurrTxMbpsMin(145)sub10RadioLclLinkStatus(10)sub10RadioLclLnkLoss(4)sub10RadioLclRxModulationMode(11)sub10RadioLclRxPower(2)sub10RadioLclTxModulationMode(12)sub10RadioLclTxPower(5)sub10RadioLclVectErr(3)sub10RadioMgmtAPCMode(7)sub10RadioMgmtAlignmentMode(9)sub10RadioMgmtModulationMode(8)sub10RadioMgmtTxRxFreq(6)sub10RadioStats15mHist8PSKToQPSK(114)sub10RadioStats15mHistAFERAvg(107)sub10RadioStats15mHistAFERMax(106)sub10RadioStats15mHistAFERMin(105)sub10RadioStats15mHistLnkLossAvg(101)sub10RadioStats15mHistLnkLossMax(100)sub10RadioStats15mHistLnkLossMin(99)sub10RadioStats15mHistMWUTempAvg(104)sub10RadioStats15mHistMWUTempMax(103)sub10RadioStats15mHistMWUTempMin(102)sub10RadioStats15mHistQPSKTo8PSK(113)sub10RadioStats15mHistRx8PSK(116)sub10RadioStats15mHistRxBadFrms(112)sub10RadioStats15mHistRxMgmtPkts(110)sub10RadioStats15mHistRxPkts(108)sub10RadioStats15mHistRxPowerAvg(95)sub10RadioStats15mHistRxPowerMax(94)sub10RadioStats15mHistRxPowerMin(93)sub10RadioStats15mHistRxQPSK(115)sub10RadioStats15mHistTx8PSK(118)sub10RadioStats15mHistTxMgmtPkts(111)sub10RadioStats15mHistTxPkts(109)sub10RadioStats15mHistTxPowerAvg(92)sub10RadioStats15mHistTxPowerMax(91)sub10RadioStats15mHistTxPowerMin(90)sub10RadioStats15mHistTxQPSK(117)sub10RadioStats15mHistVectErrAvg(98)sub10RadioStats15mHistVectErrMax(97)sub10RadioStats15mHistVectErrMin(96)sub10RadioStats1dHist8PSKToQPSK(284)sub10RadioStats1dHistAFERAvg(277)sub10RadioStats1dHistAFERMax(276)sub10RadioStats1dHistAFERMin(275)sub10RadioStats1dHistLnkLossAvg(271)sub10RadioStats1dHistLnkLossMax(270)sub10RadioStats1dHistLnkLossMin(269)sub10RadioStats1dHistMWUTempAvg(274)sub10RadioStats1dHistMWUTempMax(273)sub10RadioStats1dHistMWUTempMin(272)sub10RadioStats1dHistQPSKTo8PSK(283)sub10RadioStats1dHistRx8PSK(286)sub10RadioStats1dHistRxBadFrms(282)sub10RadioStats1dHistRxMgmtPkts(280)sub10RadioStats1dHistRxPkts(278)sub10RadioStats1dHistRxPowerAvg(265)sub10RadioStats1dHistRxPowerMax(264)sub10RadioStats1dHistRxPowerMin(263)sub10RadioStats1dHistRxQPSK(285)sub10RadioStats1dHistTx8PSK(288)sub10RadioStats1dHistTxMgmtPkts(281)sub10RadioStats1dHistTxPkts(279)sub10RadioStats1dHistTxPowerAvg(262)sub10RadioStats1dHistTxPowerMax(261)sub10RadioStats1dHistTxPowerMin(260)sub10RadioStats1dHistTxQPSK(287)sub10RadioStats1dHistVectErrAvg(268)sub10RadioStats1dHistVectErrMax(267)sub10RadioStats1dHistVectErrMin(266)sub10RadioStats1mHist8PSKToQPSK(74)sub10RadioStats1mHistAFERAvg(67)sub10RadioStats1mHistAFERMax(66)sub10RadioStats1mHistAFERMin(65)sub10RadioStats1mHistLnkLossAvg(61)sub10RadioStats1mHistLnkLossMax(60)sub10RadioStats1mHistLnkLossMin(59)sub10RadioStats1mHistMWUTempAvg(64)sub10RadioStats1mHistMWUTempMax(63)sub10RadioStats1mHistMWUTempMin(62)sub10RadioStats1mHistQPSKTo8PSK(73)sub10RadioStats1mHistRx8PSK(76)sub10RadioStats1mHistRxBadFrms(72)sub10RadioStats1mHistRxMgmtPkts(70)sub10RadioStats1mHistRxPkts(68)sub10RadioStats1mHistRxPowerAvg(55)sub10RadioStats1mHistRxPowerMax(54)sub10RadioStats1mHistRxPowerMin(53)sub10RadioStats1mHistRxQPSK(75)sub10RadioStats1mHistTx8PSK(78)sub10RadioStats1mHistTxMgmtPkts(71)sub10RadioStats1mHistTxPkts(69)sub10RadioStats1mHistTxPowerAvg(52)sub10RadioStats1mHistTxPowerMax(51)sub10RadioStats1mHistTxPowerMin(50)sub10RadioStats1mHistTxQPSK(77)sub10RadioStats1mHistVectErrAvg(58)sub10RadioStats1mHistVectErrMax(57)sub10RadioStats1mHistVectErrMin(56)sub10RadioStatsCurrAFERAvg(37)sub10RadioStatsCurrAFERMax(36)sub10RadioStatsCurrAFERMin(35)sub10RadioStatsCurrLnkLossAvg(31)sub10RadioStatsCurrLnkLossMax(30)sub10RadioStatsCurrLnkLossMin(29)sub10RadioStatsCurrMWUTempAvg(34)sub10RadioStatsCurrMWUTempMax(33)sub10RadioStatsCurrMWUTempMin(32)sub10RadioStatsCurrRxPowerAvg(25)sub10RadioStatsCurrRxPowerMax(24)sub10RadioStatsCurrRxPowerMin(23)sub10RadioStatsCurrTxPowerAvg(22)sub10RadioStatsCurrTxPowerMax(21)sub10RadioStatsCurrTxPowerMin(20)sub10RadioStatsCurrVectErrAvg(28)sub10RadioStatsCurrVectErrMax(27)sub10RadioStatsCurrVectErrMin(26)sub10UnitLclMWUTemperature(1)A MIB object that may be measured by Alarm Management or any other sub-system.
Sub10ModulationModeINTEGERmode8psk(2)modebpsk(0)modeqpsk(1)Radio Modulation Mode.
Sub10NTPSyncStatusINTEGERntpInSync(1)ntpOutOfSync(0)The indication that the systems clock is synchronised with the NTP server.
Sub10OperStatusINTEGERopStatusDormant(5)opStatusDown(2)opStatusLowerLayerDown(7)opStatusNotPresent(6)opStatusTesting(3)opStatusUnknown(4)opStatusUp(1)The status of the ethernet link, this maps directly to ifOperStatus.
Sub10QoSQueueUnsigned32 (0..7)Display hint:
dIdentifies the QoS queue number for up to 8 queues.
Sub10RadioDataRateINTEGERradioDataRate100(4)radioDataRate1000(0)radioDataRate300(3)radioDataRate500(2)radioDataRate700(1)The maximum data rate of the Airside interface.
Sub10RadioLinkStateINTEGERradioLinkStateDown(0)radioLinkStateUnknown(2)radioLinkStateUp(1)The status of the radio link
Sub10Snmpv3AuthProtocolINTEGERmd5(2)noAuth(1)sha1(3)The SNMPv3 authentication protocol assigned to a group of SNMPv3 users.
Sub10Snmpv3PrivProtocolINTEGERaes(3)des(2)noPriv(1)The SNMPv3 privacy protocol assigned to a group of SNMPv3 users.
Sub10Snmpv3SecurityLevelINTEGERauthNoPriv(2)authPriv(3)noAuthNoPriv(1)The SNMPv3 security level assigned to a group of SNMPv3 users.
Sub10StateINTEGERstateDisabled(0)stateEnabled(1)A general configuration type to indicate enabled or disabled.
Sub10StatsGroupINTEGERstatsGroupAll(2)statsGroupEthernet15m(11)statsGroupEthernet1d(12)statsGroupEthernet1m(10)statsGroupEthernet1s(9)statsGroupEthernetCurr(8)statsGroupNone(1)statsGroupRadio15m(6)statsGroupRadio1d(7)statsGroupRadio1m(5)statsGroupRadio1s(4)statsGroupRadioCurr(3)statsGroupRadioCurr60s(13)The type of stats.
Sub10TerminalTypeINTEGERterminalA(0)terminalB(1)Sub10Systems terminal type. A link must have an 'A' end terminal and a 'B' end terminal.
Sub10ThroughputMbpsOCTET STRING (SIZE (0..32))Display hint:
32aThroughput in Mbps (MegaBits per second).
Sub10TxPowerLimitINTEGERtxPowerLimitMinus12(4)txPowerLimitMinus15(5)txPowerLimitMinus3(1)txPowerLimitMinus6(2)txPowerLimitMinus9(3)txPowerLimitNone(0)The settings for Transmit Power limit on the Radio interface. A value of txPowerLimitNone means the TxPower is not limited by the radio.
Sub10UnitTypeINTEGERbaseband1000A(2)baseband1000B(3)baseband100A(0)baseband100B(1)e1000FCCA(14)e1000FCCB(15)e1000ROWA(12)e1000ROWB(13)v1000FCCA(10)v1000FCCB2(11)v1000ROWA(8)v1000ROWB(9)v100FCCA(6)v100FCCB(7)v100ROWA(4)v100ROWB(5)Sub10Systems unit type.
Sub10UserGroupINTEGERadministration(2)engineer(4)maintenance(3)operation(1)The user group types. A user is assigned to a group where each group has specific access privileges.
Sub10VlanIdUnsigned32 (0..4095)Display hint:
dA VLAN Id (12 bits in the TCF part of an ethernet frame).
Sub10VlanPriorityUnsigned32 (0..7)Display hint:
dA VLAN Priority or PCP bits (3 bits in the TCF part of an ethernet frame). The priority PCP bits are based on 802.1p where 0 is the lowest and 7 is the highest. Priority Acronym Traffic Types 0 BK Background 1 BE Best Effort 2 EE Excellent Effort 3 CA Critical Applications 4 VI Video, 100 ms latency and jitter 5 VO Voice, 10 ms latency and jitter 6 IC Internetwork Control 7 NC Network Control.
Sub10VlanTagActionINTEGERdrop(3)tag(2)tagActionNone(0)untag(1)Used in Vlan Mgmt to support Vlan tag manipulaton on the Ethernet interface.
Traps / Notifications
- sub10EthernetAlarm
1.3.6.1.4.1.39003.0.2 - sub10RadioAlarm
1.3.6.1.4.1.39003.0.3 - sub10UnitAlarm
1.3.6.1.4.1.39003.0.1
Groups and compliance
- sub10Compliance
- sub10EthLclStatusEntryGrp
- sub10EthMgmtPhyEntryGrp
- sub10EthMgmtQoSDSCPEntryGrp
- sub10EthMgmtQoSGrp
- sub10EthMgmtQoSMPLSEntryGrp
- sub10EthMgmtQoSPCPEntryGrp
- sub10EthMgmtQoSQEntryGrp
- sub10EthMgmtQoSVlanEntryGrp
- sub10EthMgmtStatsActiveEntryGrp
- sub10EthMgmtVlanAllowedEntryGrp
- sub10EthMgmtVlanGrp
- sub10EthRmtStatusEntryGrp
- sub10EthStats15mHistEntryGrp
- sub10EthStats1dHistEntryGrp
- sub10EthStats1dHistoryGrp
- sub10EthernetStats15mHistoryGrp
- sub10EthernetStatsCurrEntryGrp
- sub10EthernetStatsGrp
- sub10NotificationsGrp
- sub10RadioLocalStatusGrp
- sub10RadioMgmtGrp
- sub10RadioMgmtStatsActiveEntryGrp
- sub10RadioMgmtStatsGrp
- sub10RadioRemoteStatusGrp
- sub10RadioStats15mHistEntryGrp
- sub10RadioStats15mHistoryGrp
- sub10RadioStats1dHistEntryGrp
- sub10RadioStats1dHistoryGrp
- sub10RadioStats1mHistEntryGrp
- sub10RadioStats1mHistoryGrp
- sub10RadioStatsCurrentGrp
- sub10RadioStatsGrp
- sub10UnitLclAlarmStateEntryGrp
- sub10UnitLocalStatusGrp
- sub10UnitMgmtActionsGrp
- sub10UnitMgmtAlarmEntryGrp
- sub10UnitMgmtAlarmsGrp
- sub10UnitMgmtDNSEntryGrp
- sub10UnitMgmtEncryptionGrp
- sub10UnitMgmtFirmwareBankEntryGrp
- sub10UnitMgmtFirmwareGrp
- sub10UnitMgmtIpGrp
- sub10UnitMgmtLicenseGrp
- sub10UnitMgmtSnmpAccessEntryGrp
- sub10UnitMgmtSnmpGrp
- sub10UnitMgmtSnmpTargetEntryGrp
- sub10UnitMgmtSnmpTrpDstEntryGrp
- sub10UnitMgmtSnmpUserEntryGrp
- sub10UnitMgmtSyncEGrp
- sub10UnitMgmtSystemGrp
- sub10UnitMgmtTimeGrp
- sub10UnitMgmtUserEntryGrp
- sub10UnitMgmtUsersGrp
- sub10UnitMgmtVlanGrp
- sub10UnitRemoteStatusGrp