SPECTRACOM-PTPBASE-MIB
Safran Trusted 4D Inc.The MIB module for PTP version 2
Copyright (c) 2017 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject to
the license terms contained in, the Simplified BSD License set
forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
Overview of PTP version 2 (IEEE Std. 1588-2008)
[IEEE-1588-2008] defines a protocol enabling precise
synchronization of clocks in measurement and control systems
implemented with packet-based networks, the Precision Time
Protocol version 2 (PTPv2). This MIB module does not address
PTPv1, the earlier version defined in IEEE Std. 1588-2002.
The protocol is applicable to network elements communicating
using IP. The protocol enables heterogeneous systems that
include clocks of various inherent precision, resolution, and
stability to synchronize to a grandmaster clock.
The protocol supports system-wide synchronization accuracy in
the sub-microsecond range with minimal network and local clock
computing resources. [IEEE-1588-2008] uses UDP/IP or
Ethernet and can be adapted to other mappings. It includes
formal mechanisms for message extensions, higher sampling rates,
correction for asymmetry, a clock type to reduce error
accumulation in large topologies, and specifications on how to
incorporate the resulting additional data into the
synchronization protocol. [IEEE-1588-2008] also defines
conformance and management capability.
MIB description
This MIB module supports the Precision Time Protocol version 2
(PTPv2, hereafter designated as PTP) features of network element
system devices, when using the default PTP profile described in
[IEEE-1588-2008] when running over the IP network layer.
It is envisioned that this MIB module will complement other
managed objects to be defined to monitor and measure the
performance of the PTP devices and telecom clocks supporting
specific PTP profiles.
Some other PTP profiles have their own MIB modules defined as
part of the profile, and this MIB module is not intended to
replace those MIB modules.
Technical terms used in this module are defined in
[IEEE-1588-2008].
The MIB module refers to sections of [IEEE-1588-2008].
Abbreviations:
E2E End-to-End
EUI Extended Unique Identifier
GPS Global Positioning System
IANA Internet Assigned Numbers Authority
IP Internet Protocol
NTP Network Time Protocol (see [RFC5905])
P2P Peer-to-Peer
PTP Precision Time Protocol
TAI International Atomic Time
UDP User Datagram Protocol
UTC Coordinated Universal Time
References:
[IEEE-1588-2008] IEEE Standard for A Precision Clock
Synchronization Protocol for Networked Measurement and
Control Systems, IEEE Std. 1588-2008, July 2008.
The below table specifies the object formats of the various
textual conventions used.
Data type mapping Textual Convention SYNTAX
------------------- --------------------- ------------------
5.3.2 TimeInterval PtpClockTimeInterval OCTET
STRING(SIZE(1..255))
5.3.3 Timestamp PtpClockTimestamp OCTET STRING(SIZE(6))
5.3.4 ClockIdentity PtpClockIdentity OCTET STRING(SIZE(8))
5.3.5 PortIdentity PtpClockPortNumber INTEGER(1..65535)
5.3.7 ClockQuality PtpClockQualityClassTypesnmptranslate -m SPECTRACOM-PTPBASE-MIB -Tpsnmpwalk -v2c -c <community> -m SPECTRACOM-PTPBASE-MIB <host> 1.3.6.1.4.1.18837.1.1.7Imports
| IF-MIB | InterfaceIndexOrZero |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, mib-2 |
| SNMPv2-TC | AutonomousType, DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
| SPECTRACOM-GLOBAL-REG-MIB | specModules, specProducts |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IptpbaseMIB | 1.3.6.1.4.1.18837.1.1.7 | ||||||||||||
identity The MIB module for PTP version 2
Copyright (c) 2017 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject to
the license terms contained in, the Simplified BSD License set
forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
Overview of PTP version 2 (IEEE Std. 1588-2008)
[IEEE-1588-2008] defines a protocol enabling precise
synchronization of clocks in measurement and control systems
implemented with packet-based networks, the Precision Time
Protocol version 2 (PTPv2). This MIB module does not address
PTPv1, the earlier version defined in IEEE Std. 1588-2002.
The protocol is applicable to network elements communicating
using IP. The protocol enables heterogeneous systems that
include clocks of various inherent precision, resolution, and
stability to synchronize to a grandmaster clock.
The protocol supports system-wide synchronization accuracy in
the sub-microsecond range with minimal network and local clock
computing resources. [IEEE-1588-2008] uses UDP/IP or
Ethernet and can be adapted to other mappings. It includes
formal mechanisms for message extensions, higher sampling rates,
correction for asymmetry, a clock type to reduce error
accumulation in large topologies, and specifications on how to
incorporate the resulting additional data into the
synchronization protocol. [IEEE-1588-2008] also defines
conformance and management capability.
MIB description
This MIB module supports the Precision Time Protocol version 2
(PTPv2, hereafter designated as PTP) features of network element
system devices, when using the default PTP profile described in
[IEEE-1588-2008] when running over the IP network layer.
It is envisioned that this MIB module will complement other
managed objects to be defined to monitor and measure the
performance of the PTP devices and telecom clocks supporting
specific PTP profiles.
Some other PTP profiles have their own MIB modules defined as
part of the profile, and this MIB module is not intended to
replace those MIB modules.
Technical terms used in this module are defined in
[IEEE-1588-2008].
The MIB module refers to sections of [IEEE-1588-2008].
Abbreviations:
E2E End-to-End
EUI Extended Unique Identifier
GPS Global Positioning System
IANA Internet Assigned Numbers Authority
IP Internet Protocol
NTP Network Time Protocol (see [RFC5905])
P2P Peer-to-Peer
PTP Precision Time Protocol
TAI International Atomic Time
UDP User Datagram Protocol
UTC Coordinated Universal Time
References:
[IEEE-1588-2008] IEEE Standard for A Precision Clock
Synchronization Protocol for Networked Measurement and
Control Systems, IEEE Std. 1588-2008, July 2008.
The below table specifies the object formats of the various
textual conventions used.
Data type mapping Textual Convention SYNTAX
------------------- --------------------- ------------------
5.3.2 TimeInterval PtpClockTimeInterval OCTET
STRING(SIZE(1..255))
5.3.3 Timestamp PtpClockTimestamp OCTET STRING(SIZE(6))
5.3.4 ClockIdentity PtpClockIdentity OCTET STRING(SIZE(8))
5.3.5 PortIdentity PtpClockPortNumber INTEGER(1..65535)
5.3.7 ClockQuality PtpClockQualityClassType | |||||||||||||
| NptpbaseSnmpObjs | 1.3.6.1.4.1.18837.3.5 | ||||||||||||
| NptpbaseMIBNotifs | 1.3.6.1.4.1.18837.3.5.0 | ||||||||||||
| NptpbaseMIBObjects | 1.3.6.1.4.1.18837.3.5.1 | ||||||||||||
| NptpbaseMIBSystemInfo | 1.3.6.1.4.1.18837.3.5.1.1 | ||||||||||||
| TptpbaseSystemTable | 1.3.6.1.4.1.18837.3.5.1.1.1 | NA | |||||||||||
table · not-accessible · current Table of count information about the PTP system for all domains. | |||||||||||||
| RptpbaseSystemEntry | 1.3.6.1.4.1.18837.3.5.1.1.1.1 | NA | |||||||||||
row · not-accessible · current A table entry that contains count information about a single domain. New row entries are added when the PTP clock for this domain is configured, while the unconfiguration of the PTP clock removes them. | |||||||||||||
| CptpDomainIndex | 1.3.6.1.4.1.18837.3.5.1.1.1.1.1 | PtpClockDomainType | NA | ||||||||||
column · PtpClockDomainType · not-accessible · current This object specifies the domain number used to create a logical group of PTP devices. The Clock Domain is a logical group of clocks and devices that synchronize with each other using the PTP protocol. 0 Default domain 1 Alternate domain 1 2 Alternate domain 2 3 Alternate domain 3 4 - 127 User-defined domains 128 - 255 Reserved | |||||||||||||
| CptpInstanceIndex | 1.3.6.1.4.1.18837.3.5.1.1.1.1.2 | PtpClockInstanceType | NA | ||||||||||
column · PtpClockInstanceType · not-accessible · current This object specifies the instance of the clock for this domain. | |||||||||||||
| CptpDomainClockPortsTotal | 1.3.6.1.4.1.18837.3.5.1.1.1.1.3 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current This object specifies the total number of clock ports configured within a domain in the system.
| |||||||||||||
| TptpbaseSystemDomainTable | 1.3.6.1.4.1.18837.3.5.1.1.2 | NA | |||||||||||
table · not-accessible · current Table of information about the PTP system for all clock modes -- ordinary, boundary, or transparent. | |||||||||||||
| RptpbaseSystemDomainEntry | 1.3.6.1.4.1.18837.3.5.1.1.2.1 | NA | |||||||||||
row · not-accessible · current A table entry that contains information about a single clock mode for the PTP system. A row entry gets added when PTP clocks are configured on the node. | |||||||||||||
| CptpbaseSystemDomainClockTypeIndex | 1.3.6.1.4.1.18837.3.5.1.1.2.1.1 | PtpClockType | NA | ||||||||||
column · PtpClockType · not-accessible · current This object specifies the clock type as defined in the textual convention description. | |||||||||||||
| CptpbaseSystemDomainTotals | 1.3.6.1.4.1.18837.3.5.1.1.2.1.2 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This object specifies the total number of PTP domains for this particular clock type configured in this node.
| |||||||||||||
| SptpbaseSystemProfile | 1.3.6.1.4.1.18837.3.5.1.1.3 | PtpClockProfileType | RO | ||||||||||
scalar · PtpClockProfileType · read-only · current This object specifies the PTP profile implemented on the system. | |||||||||||||
| NptpbaseMIBClockInfo | 1.3.6.1.4.1.18837.3.5.1.2 | ||||||||||||
| TptpbaseClockCurrentDSTable | 1.3.6.1.4.1.18837.3.5.1.2.1 | NA | |||||||||||
table · not-accessible · current Table of information about the PTP clock currentDS for all domains. | |||||||||||||
| RptpbaseClockCurrentDSEntry | 1.3.6.1.4.1.18837.3.5.1.2.1.1 | NA | |||||||||||
row · not-accessible · current A table entry that contains information about a single PTP clock currentDS for a domain. | |||||||||||||
| CptpbaseClockCurrentDSDomainIndex | 1.3.6.1.4.1.18837.3.5.1.2.1.1.1 | PtpClockDomainType | NA | ||||||||||
column · PtpClockDomainType · not-accessible · current This object specifies the domain number used to create a logical group of PTP devices. | |||||||||||||
| CptpbaseClockCurrentDSClockTypeIndex | 1.3.6.1.4.1.18837.3.5.1.2.1.1.2 | PtpClockType | NA | ||||||||||
column · PtpClockType · not-accessible · current This object specifies the clock type as defined in the textual convention description. | |||||||||||||
| CptpbaseClockCurrentDSInstanceIndex | 1.3.6.1.4.1.18837.3.5.1.2.1.1.3 | PtpClockInstanceType | NA | ||||||||||
column · PtpClockInstanceType · not-accessible · current This object specifies the instance of the clock for this clock type in the given domain. | |||||||||||||
| CptpbaseClockCurrentDSStepsRemoved | 1.3.6.1.4.1.18837.3.5.1.2.1.1.4 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The current clock dataset stepsRemoved value. This object specifies the distance measured by the number of boundary clocks between the local clock and the foreign master as indicated in the stepsRemoved field of Announce messages.
| |||||||||||||
| CptpbaseClockCurrentDSOffsetFromMaster | 1.3.6.1.4.1.18837.3.5.1.2.1.1.5 | PtpClockTimeInterval | RO | ||||||||||
column · PtpClockTimeInterval · read-only · current This object specifies the current clock dataset ClockOffset value. The value of the computation of the offset in time between a slave and a master clock.
| |||||||||||||
| CptpbaseClockCurrentDSMeanPathDelay | 1.3.6.1.4.1.18837.3.5.1.2.1.1.6 | PtpClockTimeInterval | RO | ||||||||||
column · PtpClockTimeInterval · read-only · current This object specifies the current clock dataset MeanPathDelay value. The mean path delay between a pair of ports as measured by the delay request-response mechanism.
| |||||||||||||
| TptpbaseClockParentDSTable | 1.3.6.1.4.1.18837.3.5.1.2.2 | NA | |||||||||||
table · not-accessible · current Table of information about the PTP clock parentDS for all domains. | |||||||||||||
| RptpbaseClockParentDSEntry | 1.3.6.1.4.1.18837.3.5.1.2.2.1 | NA | |||||||||||
row · not-accessible · current A table entry that contains information about a single PTP clock parentDS for a domain. | |||||||||||||
| CptpbaseClockParentDSDomainIndex | 1.3.6.1.4.1.18837.3.5.1.2.2.1.1 | PtpClockDomainType | NA | ||||||||||
column · PtpClockDomainType · not-accessible · current This object specifies the domain number used to create a logical group of PTP devices. | |||||||||||||
| CptpbaseClockParentDSClockTypeIndex | 1.3.6.1.4.1.18837.3.5.1.2.2.1.2 | PtpClockType | NA | ||||||||||
column · PtpClockType · not-accessible · current This object specifies the clock type as defined in the textual convention description. | |||||||||||||
| CptpbaseClockParentDSInstanceIndex | 1.3.6.1.4.1.18837.3.5.1.2.2.1.3 | PtpClockInstanceType | NA | ||||||||||
column · PtpClockInstanceType · not-accessible · current This object specifies the instance of the clock for this clock type in the given domain. | |||||||||||||
| CptpbaseClockParentDSParentPortIdentity | 1.3.6.1.4.1.18837.3.5.1.2.2.1.4 | OCTET STRING (SIZE (1..256)) | RO | 000beb.fffe.0f0934-0 | |||||||||
column · OCTET STRING (SIZE (1..256)) · read-only · current This object specifies the value of portIdentity of the port on the master that issues the Sync messages used in synchronizing this clock. Example values from LibreNMS test devices
| |||||||||||||
| CptpbaseClockParentDSParentStats | 1.3.6.1.4.1.18837.3.5.1.2.2.1.5 | TruthValue | RO | 0 | |||||||||
column · TruthValue · read-only · current This object specifies the parentDS ParentStats value. This value indicates whether the values of ParentDSOffset and ParentDSClockPhChRate have been measured and are valid. A TRUE value shall indicate valid data. Example values from LibreNMS test devices
| |||||||||||||
| CptpbaseClockParentDSOffset | 1.3.6.1.4.1.18837.3.5.1.2.2.1.6 | PtpClockIntervalBase2 (-128..127) | RO | 65535 | |||||||||
column · PtpClockIntervalBase2 (-128..127) · read-only · current This object specifies the parentDS ParentOffsetScaledLogVariance value. This value is the variance of the parent clock's phase as measured by the local clock. Example values from LibreNMS test devices
| |||||||||||||
| CptpbaseClockParentDSClockPhChRate | 1.3.6.1.4.1.18837.3.5.1.2.2.1.7 | Integer32 | RO | 2147483647 | |||||||||
column · Integer32 · read-only · current This object specifies the clock's parentDS ParentClockPhaseChangeRate value. This value is an estimate of the parent clock's phase change rate as measured by the slave clock. Example values from LibreNMS test devices
| |||||||||||||
| CptpbaseClockParentDSGMClockIdentity | 1.3.6.1.4.1.18837.3.5.1.2.2.1.8 | PtpClockIdentity | RO | 000beb.fffe.0f0934 | |||||||||
column · PtpClockIdentity · read-only · current This object specifies the parentDS grandmaster clock identity. Example values from LibreNMS test devices
| |||||||||||||
| CptpbaseClockParentDSGMClockPriority1 | 1.3.6.1.4.1.18837.3.5.1.2.2.1.9 | Unsigned32 | RO | 128 | |||||||||
column · Unsigned32 · read-only · current This object specifies the parentDS grandmaster clock priority1. Example values from LibreNMS test devices
| |||||||||||||
| CptpbaseClockParentDSGMClockPriority2 | 1.3.6.1.4.1.18837.3.5.1.2.2.1.10 | Unsigned32 | RO | 128 | |||||||||
column · Unsigned32 · read-only · current This object specifies the parentDS grandmaster clock priority2. Example values from LibreNMS test devices
| |||||||||||||
| CptpbaseClockParentDSGMClockQualityClass | 1.3.6.1.4.1.18837.3.5.1.2.2.1.11 | PtpClockQualityClassType | RO | 6 | |||||||||
column · PtpClockQualityClassType · read-only · current This object specifies the parentDS grandmaster clock quality class. Example values from LibreNMS test devices
| |||||||||||||
| CptpbaseClockParentDSGMClockQualityAccuracy | 1.3.6.1.4.1.18837.3.5.1.2.2.1.12 | PtpClockQualityAccuracyType | RO | 33 | |||||||||
column · PtpClockQualityAccuracyType · read-only · current This object specifies the parentDS grandmaster clock quality accuracy. Example values from LibreNMS test devices
| |||||||||||||
| CptpbaseClockParentDSGMClockQualityOffset | 1.3.6.1.4.1.18837.3.5.1.2.2.1.13 | Unsigned32 | RO | 23859 | |||||||||
column · Unsigned32 · read-only · current This object specifies the parentDS grandmaster clock quality offset. Example values from LibreNMS test devices
| |||||||||||||
| TptpbaseClockDefaultDSTable | 1.3.6.1.4.1.18837.3.5.1.2.3 | NA | |||||||||||
table · not-accessible · current Table of information about the PTP clock defaultDS for all domains. | |||||||||||||
| RptpbaseClockDefaultDSEntry | 1.3.6.1.4.1.18837.3.5.1.2.3.1 | NA | |||||||||||
row · not-accessible · current A table entry that contains information about a single PTP clock defaultDS for a domain. | |||||||||||||
| CptpbaseClockDefaultDSDomainIndex | 1.3.6.1.4.1.18837.3.5.1.2.3.1.1 | PtpClockDomainType | NA | ||||||||||
column · PtpClockDomainType · not-accessible · current This object specifies the domain number used to create a logical group of PTP devices. | |||||||||||||
| CptpbaseClockDefaultDSClockTypeIndex | 1.3.6.1.4.1.18837.3.5.1.2.3.1.2 | PtpClockType | NA | ||||||||||
column · PtpClockType · not-accessible · current This object specifies the clock type as defined in the textual convention description. | |||||||||||||
| CptpbaseClockDefaultDSInstanceIndex | 1.3.6.1.4.1.18837.3.5.1.2.3.1.3 | PtpClockInstanceType | NA | ||||||||||
column · PtpClockInstanceType · not-accessible · current This object specifies the instance of the clock for this clock type in the given domain. | |||||||||||||
| CptpbaseClockDefaultDSTwoStepFlag | 1.3.6.1.4.1.18837.3.5.1.2.3.1.4 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current This object specifies whether the two-step process is used. | |||||||||||||
| CptpbaseClockDefaultDSClockIdentity | 1.3.6.1.4.1.18837.3.5.1.2.3.1.5 | PtpClockIdentity | RO | ||||||||||
column · PtpClockIdentity · read-only · current This object specifies the defaultDS clockIdentity member. | |||||||||||||
| CptpbaseClockDefaultDSPriority1 | 1.3.6.1.4.1.18837.3.5.1.2.3.1.6 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This object specifies the defaultDS priority1 member. | |||||||||||||
| CptpbaseClockDefaultDSPriority2 | 1.3.6.1.4.1.18837.3.5.1.2.3.1.7 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This object specifies the defaultDS priority2 member. | |||||||||||||
| CptpbaseClockDefaultDSSlaveOnly | 1.3.6.1.4.1.18837.3.5.1.2.3.1.8 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current This object specifies whether the SlaveOnly flag is set. | |||||||||||||
| CptpbaseClockDefaultDSQualityClass | 1.3.6.1.4.1.18837.3.5.1.2.3.1.9 | PtpClockQualityClassType | RO | ||||||||||
column · PtpClockQualityClassType · read-only · current This object specifies the defaultDS Quality Class. | |||||||||||||
| CptpbaseClockDefaultDSQualityAccuracy | 1.3.6.1.4.1.18837.3.5.1.2.3.1.10 | PtpClockQualityAccuracyType | RO | ||||||||||
column · PtpClockQualityAccuracyType · read-only · current This object specifies the defaultDS Quality Accuracy. | |||||||||||||
| CptpbaseClockDefaultDSQualityOffset | 1.3.6.1.4.1.18837.3.5.1.2.3.1.11 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object specifies the defaultDS Quality offset. | |||||||||||||
| TptpbaseClockRunningTable | 1.3.6.1.4.1.18837.3.5.1.2.4 | NA | |||||||||||
table · not-accessible · current Table of information about the PTP clock running datasets for all domains. | |||||||||||||
| RptpbaseClockRunningEntry | 1.3.6.1.4.1.18837.3.5.1.2.4.1 | NA | |||||||||||
row · not-accessible · current A table entry that contains information about a single PTP clock running dataset for a domain. | |||||||||||||
| CptpbaseClockRunningDomainIndex | 1.3.6.1.4.1.18837.3.5.1.2.4.1.1 | PtpClockDomainType | NA | ||||||||||
column · PtpClockDomainType · not-accessible · current This object specifies the domain number used to create a logical group of PTP devices. | |||||||||||||
| CptpbaseClockRunningClockTypeIndex | 1.3.6.1.4.1.18837.3.5.1.2.4.1.2 | PtpClockType | NA | ||||||||||
column · PtpClockType · not-accessible · current This object specifies the clock type as defined in the textual convention description. | |||||||||||||
| CptpbaseClockRunningInstanceIndex | 1.3.6.1.4.1.18837.3.5.1.2.4.1.3 | PtpClockInstanceType | NA | ||||||||||
column · PtpClockInstanceType · not-accessible · current This object specifies the instance of the clock for this clock type in the given domain. | |||||||||||||
| CptpbaseClockRunningState | 1.3.6.1.4.1.18837.3.5.1.2.4.1.4 | PtpClockStateType | RO | ||||||||||
column · PtpClockStateType · read-only · current This object specifies the clock state returned by a PTP engine. | |||||||||||||
| CptpbaseClockRunningPacketsSent | 1.3.6.1.4.1.18837.3.5.1.2.4.1.5 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object specifies the total number of all unicast and multicast packets that have been sent out for this clock in this domain for this type. These counters are discontinuous. | |||||||||||||
| CptpbaseClockRunningPacketsReceived | 1.3.6.1.4.1.18837.3.5.1.2.4.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object specifies the total number of all unicast and multicast packets that have been received for this clock in this domain for this type. These counters are discontinuous. | |||||||||||||
| TptpbaseClockTimePropertiesDSTable | 1.3.6.1.4.1.18837.3.5.1.2.5 | NA | |||||||||||
table · not-accessible · current Table of information about the PTP clock timePropertiesDS for all domains. | |||||||||||||
| RptpbaseClockTimePropertiesDSEntry | 1.3.6.1.4.1.18837.3.5.1.2.5.1 | NA | |||||||||||
row · not-accessible · current A table entry that contains information about a single PTP clock timePropertiesDS for a domain. | |||||||||||||
| CptpbaseClockTimePropertiesDSDomainIndex | 1.3.6.1.4.1.18837.3.5.1.2.5.1.1 | PtpClockDomainType | NA | ||||||||||
column · PtpClockDomainType · not-accessible · current This object specifies the domain number used to create a logical group of PTP devices. | |||||||||||||
| CptpbaseClockTimePropertiesDSClockTypeIndex | 1.3.6.1.4.1.18837.3.5.1.2.5.1.2 | PtpClockType | NA | ||||||||||
column · PtpClockType · not-accessible · current This object specifies the clock type as defined in the textual convention description. | |||||||||||||
| CptpbaseClockTimePropertiesDSInstanceIndex | 1.3.6.1.4.1.18837.3.5.1.2.5.1.3 | PtpClockInstanceType | NA | ||||||||||
column · PtpClockInstanceType · not-accessible · current This object specifies the instance of the clock for this clock type in the given domain. | |||||||||||||
| CptpbaseClockTimePropertiesDSCurrentUTCOffsetValid | 1.3.6.1.4.1.18837.3.5.1.2.5.1.4 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current This object specifies the timePropertiesDS value of whether the current UTC offset is valid. | |||||||||||||
| CptpbaseClockTimePropertiesDSCurrentUTCOffset | 1.3.6.1.4.1.18837.3.5.1.2.5.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object specifies the timePropertiesDS value of the current UTC offset. In PTP systems whose epoch is the PTP epoch, the value of timePropertiesDS.currentUtcOffset is the offset between TAI and UTC; otherwise, the value has no meaning. The value shall be in units of seconds. | |||||||||||||
| CptpbaseClockTimePropertiesDSLeap59 | 1.3.6.1.4.1.18837.3.5.1.2.5.1.6 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current This object specifies the Leap59 value in the clock currentDS. | |||||||||||||
| CptpbaseClockTimePropertiesDSLeap61 | 1.3.6.1.4.1.18837.3.5.1.2.5.1.7 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current This object specifies the Leap61 value in the clock currentDS. | |||||||||||||
| CptpbaseClockTimePropertiesDSTimeTraceable | 1.3.6.1.4.1.18837.3.5.1.2.5.1.8 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current This object specifies the Time Traceable value in the clock currentDS. | |||||||||||||
| CptpbaseClockTimePropertiesDSFreqTraceable | 1.3.6.1.4.1.18837.3.5.1.2.5.1.9 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current This object specifies the Frequency Traceable value in the clock currentDS. | |||||||||||||
| CptpbaseClockTimePropertiesDSPTPTimescale | 1.3.6.1.4.1.18837.3.5.1.2.5.1.10 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current This object specifies the PTP Timescale value in the clock currentDS. | |||||||||||||
| CptpbaseClockTimePropertiesDSSource | 1.3.6.1.4.1.18837.3.5.1.2.5.1.11 | PtpClockTimeSourceType | RO | ||||||||||
column · PtpClockTimeSourceType · read-only · current This object specifies the Timesource value in the clock currentDS. | |||||||||||||
| TptpbaseClockTransDefaultDSTable | 1.3.6.1.4.1.18837.3.5.1.2.6 | NA | |||||||||||
table · not-accessible · current Table of information about the PTP transparentClockDefaultDS for all domains. | |||||||||||||
| RptpbaseClockTransDefaultDSEntry | 1.3.6.1.4.1.18837.3.5.1.2.6.1 | NA | |||||||||||
row · not-accessible · current A table entry that contains information about a single PTP transparent clock defaultDS for a domain. | |||||||||||||
| CptpbaseClockTransDefaultDSDomainIndex | 1.3.6.1.4.1.18837.3.5.1.2.6.1.1 | PtpClockDomainType | NA | ||||||||||
column · PtpClockDomainType · not-accessible · current This object specifies the domain number used to create a logical group of PTP devices. | |||||||||||||
| CptpbaseClockTransDefaultDSInstanceIndex | 1.3.6.1.4.1.18837.3.5.1.2.6.1.2 | PtpClockInstanceType | NA | ||||||||||
column · PtpClockInstanceType · not-accessible · current This object specifies the instance of the clock for this clock type in the given domain. | |||||||||||||
| CptpbaseClockTransDefaultDSClockIdentity | 1.3.6.1.4.1.18837.3.5.1.2.6.1.3 | PtpClockIdentity | RO | ||||||||||
column · PtpClockIdentity · read-only · current This object specifies the value of the clockIdentity attribute of the local clock. | |||||||||||||
| CptpbaseClockTransDefaultDSNumOfPorts | 1.3.6.1.4.1.18837.3.5.1.2.6.1.4 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current This object specifies the number of PTP ports of the device. These counters are discontinuous. | |||||||||||||
| CptpbaseClockTransDefaultDSDelay | 1.3.6.1.4.1.18837.3.5.1.2.6.1.5 | PtpClockMechanismType | RO | ||||||||||
column · PtpClockMechanismType · read-only · current This object, if the transparent clock is an end-to-end transparent clock, has the value of e2e; if the transparent clock is a peer-to-peer transparent clock, the value is p2p. | |||||||||||||
| CptpbaseClockTransDefaultDSPrimaryDomain | 1.3.6.1.4.1.18837.3.5.1.2.6.1.6 | PtpClockDomainType | RO | ||||||||||
column · PtpClockDomainType · read-only · current This object specifies the value of the primary syntonization domain. The initialization value is 0. | |||||||||||||
| TptpbaseClockPortTable | 1.3.6.1.4.1.18837.3.5.1.2.7 | NA | |||||||||||
table · not-accessible · current Table of information about the clock ports for a particular domain. | |||||||||||||
| RptpbaseClockPortEntry | 1.3.6.1.4.1.18837.3.5.1.2.7.1 | NA | |||||||||||
row · not-accessible · current A table entry that contains information about a single clock port. | |||||||||||||
| CptpbaseClockPortDomainIndex | 1.3.6.1.4.1.18837.3.5.1.2.7.1.1 | PtpClockDomainType | NA | ||||||||||
column · PtpClockDomainType · not-accessible · current This object specifies the domain number used to create a logical group of PTP devices. | |||||||||||||
| CptpbaseClockPortClockTypeIndex | 1.3.6.1.4.1.18837.3.5.1.2.7.1.2 | PtpClockType | NA | ||||||||||
column · PtpClockType · not-accessible · current This object specifies the clock type as defined in the textual convention description. | |||||||||||||
| CptpbaseClockPortClockInstanceIndex | 1.3.6.1.4.1.18837.3.5.1.2.7.1.3 | PtpClockInstanceType | NA | ||||||||||
column · PtpClockInstanceType · not-accessible · current This object specifies the instance of the clock for this clock type in the given domain. | |||||||||||||
| CptpbaseClockPortTablePortNumberIndex | 1.3.6.1.4.1.18837.3.5.1.2.7.1.4 | PtpClockPortNumber | NA | ||||||||||
column · PtpClockPortNumber · not-accessible · current This object specifies the PTP portNumber for this port. | |||||||||||||
| CptpbaseClockPortName | 1.3.6.1.4.1.18837.3.5.1.2.7.1.5 | DisplayString (SIZE (1..64)) | RO | ||||||||||
column · DisplayString (SIZE (1..64)) · read-only · current This object specifies the PTP clock port name configured on the node. | |||||||||||||
| CptpbaseClockPortRole | 1.3.6.1.4.1.18837.3.5.1.2.7.1.6 | PtpClockRoleType | RO | ||||||||||
column · PtpClockRoleType · read-only · current This object describes the current role (slave/master) of the port. | |||||||||||||
| CptpbaseClockPortSyncTwoStep | 1.3.6.1.4.1.18837.3.5.1.2.7.1.7 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current This object specifies that two-step clock operation between the PTP master and slave device is enabled. | |||||||||||||
| CptpbaseClockPortCurrentPeerAddressType | 1.3.6.1.4.1.18837.3.5.1.2.7.1.8 | AutonomousType | RO | ||||||||||
column · AutonomousType · read-only · current This object specifies the current peer's network address type used for PTP communication. | |||||||||||||
| CptpbaseClockPortCurrentPeerAddress | 1.3.6.1.4.1.18837.3.5.1.2.7.1.9 | PtpClockPortTransportTypeAddress | RO | ||||||||||
column · PtpClockPortTransportTypeAddress · read-only · current This object specifies the current peer's network address used for PTP communication. | |||||||||||||
| CptpbaseClockPortNumOfAssociatedPorts | 1.3.6.1.4.1.18837.3.5.1.2.7.1.10 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current This object specifies the following: For a master port - the number of PTP slave sessions (peers) associated with this PTP port. For a slave port - the number of masters available to this slave port (might or might not be peered). | |||||||||||||
| TptpbaseClockPortDSTable | 1.3.6.1.4.1.18837.3.5.1.2.8 | NA | |||||||||||
table · not-accessible · current Table of information about the clock's portDS for a particular domain. | |||||||||||||
| RptpbaseClockPortDSEntry | 1.3.6.1.4.1.18837.3.5.1.2.8.1 | NA | |||||||||||
row · not-accessible · current A table entry that contains portDS information for a single clock port. | |||||||||||||
| CptpbaseClockPortDSDomainIndex | 1.3.6.1.4.1.18837.3.5.1.2.8.1.1 | PtpClockDomainType | NA | ||||||||||
column · PtpClockDomainType · not-accessible · current This object specifies the domain number used to create a logical group of PTP devices. | |||||||||||||
| CptpbaseClockPortDSClockTypeIndex | 1.3.6.1.4.1.18837.3.5.1.2.8.1.2 | PtpClockType | NA | ||||||||||
column · PtpClockType · not-accessible · current This object specifies the clock type as defined in the textual convention description. | |||||||||||||
| CptpbaseClockPortDSClockInstanceIndex | 1.3.6.1.4.1.18837.3.5.1.2.8.1.3 | PtpClockInstanceType | NA | ||||||||||
column · PtpClockInstanceType · not-accessible · current This object specifies the instance of the clock for this clock type in the given domain. | |||||||||||||
| CptpbaseClockPortDSPortNumberIndex | 1.3.6.1.4.1.18837.3.5.1.2.8.1.4 | PtpClockPortNumber | NA | ||||||||||
column · PtpClockPortNumber · not-accessible · current This object specifies the PTP portNumber associated with this PTP port. | |||||||||||||
| CptpbaseClockPortDSName | 1.3.6.1.4.1.18837.3.5.1.2.8.1.5 | DisplayString (SIZE (1..64)) | RO | ||||||||||
column · DisplayString (SIZE (1..64)) · read-only · current This object specifies the PTP clock portDS name. | |||||||||||||
| CptpbaseClockPortDSPortIdentity | 1.3.6.1.4.1.18837.3.5.1.2.8.1.6 | OCTET STRING (SIZE (1..256)) | RO | ||||||||||
column · OCTET STRING (SIZE (1..256)) · read-only · current This object specifies the PTP clock port Identity. | |||||||||||||
| CptpbaseClockPortDSlogAnnouncementInterval | 1.3.6.1.4.1.18837.3.5.1.2.8.1.7 | PtpClockIntervalBase2 | RO | ||||||||||
column · PtpClockIntervalBase2 · read-only · current This object specifies the Announce message transmission interval associated with this clock port.
| |||||||||||||
| CptpbaseClockPortDSAnnounceRctTimeout | 1.3.6.1.4.1.18837.3.5.1.2.8.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object specifies the Announce receipt timeout associated with this clock port. | |||||||||||||
| CptpbaseClockPortDSlogSyncInterval | 1.3.6.1.4.1.18837.3.5.1.2.8.1.9 | PtpClockIntervalBase2 | RO | ||||||||||
column · PtpClockIntervalBase2 · read-only · current This object specifies the Sync message transmission interval.
| |||||||||||||
| CptpbaseClockPortDSMinDelayReqInterval | 1.3.6.1.4.1.18837.3.5.1.2.8.1.10 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object specifies the Delay_Req message transmission interval. | |||||||||||||
| CptpbaseClockPortDSPeerDelayReqInterval | 1.3.6.1.4.1.18837.3.5.1.2.8.1.11 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object specifies the Pdelay_Req message transmission interval. | |||||||||||||
| CptpbaseClockPortDSDelayMech | 1.3.6.1.4.1.18837.3.5.1.2.8.1.12 | PtpClockMechanismType | RO | ||||||||||
column · PtpClockMechanismType · read-only · current This object specifies the delay mechanism used. If the clock is an end-to-end clock, the value is e2e; if the clock is a peer to-peer clock, the value is p2p. | |||||||||||||
| CptpbaseClockPortDSPeerMeanPathDelay | 1.3.6.1.4.1.18837.3.5.1.2.8.1.13 | PtpClockTimeInterval | RO | ||||||||||
column · PtpClockTimeInterval · read-only · current This object specifies the peer meanPathDelay.
| |||||||||||||
| CptpbaseClockPortDSGrantDuration | 1.3.6.1.4.1.18837.3.5.1.2.8.1.14 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This object specifies the grant duration allocated by the master.
| |||||||||||||
| CptpbaseClockPortDSPTPVersion | 1.3.6.1.4.1.18837.3.5.1.2.8.1.15 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This object specifies the PTP version being used. | |||||||||||||
| TptpbaseClockPortRunningTable | 1.3.6.1.4.1.18837.3.5.1.2.9 | NA | |||||||||||
table · not-accessible · current Table of information about the clock ports running datasets for a particular domain. | |||||||||||||
| RptpbaseClockPortRunningEntry | 1.3.6.1.4.1.18837.3.5.1.2.9.1 | NA | |||||||||||
row · not-accessible · current A table entry that contains running dataset information about a single clock port. | |||||||||||||
| CptpbaseClockPortRunningDomainIndex | 1.3.6.1.4.1.18837.3.5.1.2.9.1.1 | PtpClockDomainType | NA | ||||||||||
column · PtpClockDomainType · not-accessible · current This object specifies the domain number used to create a logical group of PTP devices. | |||||||||||||
| CptpbaseClockPortRunningClockTypeIndex | 1.3.6.1.4.1.18837.3.5.1.2.9.1.2 | PtpClockType | NA | ||||||||||
column · PtpClockType · not-accessible · current This object specifies the clock type as defined in the textual convention description. | |||||||||||||
| CptpbaseClockPortRunningClockInstanceIndex | 1.3.6.1.4.1.18837.3.5.1.2.9.1.3 | PtpClockInstanceType | NA | ||||||||||
column · PtpClockInstanceType · not-accessible · current This object specifies the instance of the clock for this clock type in the given domain. | |||||||||||||
| CptpbaseClockPortRunningPortNumberIndex | 1.3.6.1.4.1.18837.3.5.1.2.9.1.4 | PtpClockPortNumber | NA | ||||||||||
column · PtpClockPortNumber · not-accessible · current This object specifies the PTP portNumber associated with this clock port. | |||||||||||||
| CptpbaseClockPortRunningName | 1.3.6.1.4.1.18837.3.5.1.2.9.1.5 | DisplayString (SIZE (1..64)) | RO | ||||||||||
column · DisplayString (SIZE (1..64)) · read-only · current This object specifies the PTP clock port name. | |||||||||||||
| CptpbaseClockPortRunningState | 1.3.6.1.4.1.18837.3.5.1.2.9.1.6 | PtpClockPortState | RO | ||||||||||
column · PtpClockPortState · read-only · current This object specifies the port state returned by PTP engine: initializing faulty disabled listening preMaster master passive uncalibrated slave | |||||||||||||
| CptpbaseClockPortRunningRole | 1.3.6.1.4.1.18837.3.5.1.2.9.1.7 | PtpClockRoleType | RO | ||||||||||
column · PtpClockRoleType · read-only · current This object specifies the Clock Role. | |||||||||||||
| CptpbaseClockPortRunningInterfaceIndex | 1.3.6.1.4.1.18837.3.5.1.2.9.1.8 | InterfaceIndexOrZero | RO | ||||||||||
column · InterfaceIndexOrZero · read-only · current This object specifies the interface on the node being used by the PTP clock for PTP communication. | |||||||||||||
| CptpbaseClockPortRunningTransport | 1.3.6.1.4.1.18837.3.5.1.2.9.1.9 | AutonomousType | RO | ||||||||||
column · AutonomousType · read-only · current This object specifies the transport protocol being used for PTP communication (the mapping used). | |||||||||||||
| CptpbaseClockPortRunningEncapsulationType | 1.3.6.1.4.1.18837.3.5.1.2.9.1.10 | AutonomousType | RO | ||||||||||
column · AutonomousType · read-only · current This object specifies the type of encapsulation if the interface is adding extra layers (e.g., VLAN or Pseudowire encapsulation) for the PTP messages. | |||||||||||||
| CptpbaseClockPortRunningTxMode | 1.3.6.1.4.1.18837.3.5.1.2.9.1.11 | PtpClockTxModeType | RO | ||||||||||
column · PtpClockTxModeType · read-only · current This object specifies the clock transmission mode as: unicast: Using unicast communication channel multicast: Using multicast communication channel multicast-mix: Using multicast-unicast communication channel | |||||||||||||
| CptpbaseClockPortRunningRxMode | 1.3.6.1.4.1.18837.3.5.1.2.9.1.12 | PtpClockTxModeType | RO | ||||||||||
column · PtpClockTxModeType · read-only · current This object specifies the clock receive mode as: unicast: Using unicast communication channel multicast: Using multicast communication channel multicast-mix: Using multicast-unicast communication channel | |||||||||||||
| CptpbaseClockPortRunningPacketsReceived | 1.3.6.1.4.1.18837.3.5.1.2.9.1.13 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object specifies the packets received on the clock port (cumulative). These counters are discontinuous.
| |||||||||||||
| CptpbaseClockPortRunningPacketsSent | 1.3.6.1.4.1.18837.3.5.1.2.9.1.14 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object specifies the packets sent on the clock port (cumulative). These counters are discontinuous.
| |||||||||||||
| TptpbaseClockPortTransDSTable | 1.3.6.1.4.1.18837.3.5.1.2.10 | NA | |||||||||||
table · not-accessible · current Table of information about the transparentClockPortDS for a particular domain. | |||||||||||||
| RptpbaseClockPortTransDSEntry | 1.3.6.1.4.1.18837.3.5.1.2.10.1 | NA | |||||||||||
row · not-accessible · current A table entry that contains clock port transparent dataset information about a single clock port. | |||||||||||||
| CptpbaseClockPortTransDSDomainIndex | 1.3.6.1.4.1.18837.3.5.1.2.10.1.1 | PtpClockDomainType | NA | ||||||||||
column · PtpClockDomainType · not-accessible · current This object specifies the domain number used to create a logical group of PTP devices. | |||||||||||||
| CptpbaseClockPortTransDSInstanceIndex | 1.3.6.1.4.1.18837.3.5.1.2.10.1.2 | PtpClockInstanceType | NA | ||||||||||
column · PtpClockInstanceType · not-accessible · current This object specifies the instance of the clock for this clock type in the given domain. | |||||||||||||
| CptpbaseClockPortTransDSPortNumberIndex | 1.3.6.1.4.1.18837.3.5.1.2.10.1.3 | PtpClockPortNumber | NA | ||||||||||
column · PtpClockPortNumber · not-accessible · current This object specifies the PTP portNumber associated with this port. | |||||||||||||
| CptpbaseClockPortTransDSPortIdentity | 1.3.6.1.4.1.18837.3.5.1.2.10.1.4 | PtpClockIdentity | RO | ||||||||||
column · PtpClockIdentity · read-only · current This object specifies the value of the PortIdentity attribute of the local port. | |||||||||||||
| CptpbaseClockPortTransDSlogMinPdelayReqInt | 1.3.6.1.4.1.18837.3.5.1.2.10.1.5 | PtpClockIntervalBase2 | RO | ||||||||||
column · PtpClockIntervalBase2 · read-only · current This object specifies the value of the logarithm to the base 2 of the minPdelayReqInterval. | |||||||||||||
| CptpbaseClockPortTransDSFaultyFlag | 1.3.6.1.4.1.18837.3.5.1.2.10.1.6 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current This object specifies the value TRUE if the port is faulty and FALSE if the port is operating normally. | |||||||||||||
| CptpbaseClockPortTransDSPeerMeanPathDelay | 1.3.6.1.4.1.18837.3.5.1.2.10.1.7 | PtpClockTimeInterval | RO | ||||||||||
column · PtpClockTimeInterval · read-only · current This object specifies, if the delayMechanism used is p2p, the value of the estimate of the current one-way propagation delay, i.e., <meanPathDelay> on the link attached to this port, computed using the peer delay mechanism. If the value of the delayMechanism used is e2e, then the value will be zero.
| |||||||||||||
| TptpbaseClockPortAssociateTable | 1.3.6.1.4.1.18837.3.5.1.2.11 | NA | |||||||||||
table · not-accessible · current Table of information about a given port's associated ports.
For a master port: multiple slave ports that have established
sessions with the current master port.
For a slave port: the list of masters available for a given
slave port.
Session information (packets, errors) to be displayed based on
availability and scenario. | |||||||||||||
| RptpbaseClockPortAssociateEntry | 1.3.6.1.4.1.18837.3.5.1.2.11.1 | NA | |||||||||||
row · not-accessible · current A table entry that contains information about a single associated port for the given clock port. | |||||||||||||
| CptpClockPortCurrentDomainIndex | 1.3.6.1.4.1.18837.3.5.1.2.11.1.1 | PtpClockDomainType | NA | ||||||||||
column · PtpClockDomainType · not-accessible · current This object specifies the given port's domain number. | |||||||||||||
| CptpClockPortCurrentClockTypeIndex | 1.3.6.1.4.1.18837.3.5.1.2.11.1.2 | PtpClockType | NA | ||||||||||
column · PtpClockType · not-accessible · current This object specifies the given port's clock type. | |||||||||||||
| CptpClockPortCurrentClockInstanceIndex | 1.3.6.1.4.1.18837.3.5.1.2.11.1.3 | PtpClockInstanceType | NA | ||||||||||
column · PtpClockInstanceType · not-accessible · current This object specifies the instance of the clock for this clock type in the given domain. | |||||||||||||
| CptpClockPortCurrentPortNumberIndex | 1.3.6.1.4.1.18837.3.5.1.2.11.1.4 | PtpClockPortNumber | NA | ||||||||||
column · PtpClockPortNumber · not-accessible · current This object specifies the PTP portNumber for the given port. | |||||||||||||
| CptpbaseClockPortAssociatePortIndex | 1.3.6.1.4.1.18837.3.5.1.2.11.1.5 | Unsigned32 (1..65535) | NA | ||||||||||
column · Unsigned32 (1..65535) · not-accessible · current This object specifies the associated port's serial number in the current port's context. | |||||||||||||
| CptpbaseClockPortAssociateAddressType | 1.3.6.1.4.1.18837.3.5.1.2.11.1.6 | AutonomousType | RO | ||||||||||
column · AutonomousType · read-only · current This object specifies the peer port's network address type used for PTP communication. The OCTET STRING representation of the OID of ptpbaseWellKnownTransportTypes will be used in the values contained in the OCTET STRING. | |||||||||||||
| CptpbaseClockPortAssociateAddress | 1.3.6.1.4.1.18837.3.5.1.2.11.1.7 | PtpClockPortTransportTypeAddress | RO | ||||||||||
column · PtpClockPortTransportTypeAddress · read-only · current This object specifies the peer port's network address used for PTP communication. | |||||||||||||
| CptpbaseClockPortAssociatePacketsSent | 1.3.6.1.4.1.18837.3.5.1.2.11.1.8 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of packets sent to this peer port from the current port. These counters are discontinuous.
| |||||||||||||
| CptpbaseClockPortAssociatePacketsReceived | 1.3.6.1.4.1.18837.3.5.1.2.11.1.9 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The number of packets received from this peer port by the current port. These counters are discontinuous.
| |||||||||||||
| CptpbaseClockPortAssociateInErrors | 1.3.6.1.4.1.18837.3.5.1.2.11.1.10 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object specifies the input errors associated with the peer port. These counters are discontinuous.
| |||||||||||||
| CptpbaseClockPortAssociateOutErrors | 1.3.6.1.4.1.18837.3.5.1.2.11.1.11 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current This object specifies the output errors associated with the peer port. These counters are discontinuous.
| |||||||||||||
| NptpbaseWellKnownTransportTypes | 1.3.6.1.4.1.18837.3.5.1.2.12 | ||||||||||||
| NptpbaseTransportTypeIPversion4 | 1.3.6.1.4.1.18837.3.5.1.2.12.1 | ||||||||||||
node · current IP version 4 | |||||||||||||
| NptpbaseTransportTypeIPversion6 | 1.3.6.1.4.1.18837.3.5.1.2.12.2 | ||||||||||||
node · current IP version 6 | |||||||||||||
| NptpbaseTransportTypeEthernet | 1.3.6.1.4.1.18837.3.5.1.2.12.3 | ||||||||||||
node · current Ethernet | |||||||||||||
| NptpbaseTransportTypeDeviceNET | 1.3.6.1.4.1.18837.3.5.1.2.12.4 | ||||||||||||
node · current Device NET | |||||||||||||
| NptpbaseTransportTypeControlNET | 1.3.6.1.4.1.18837.3.5.1.2.12.5 | ||||||||||||
node · current Control NET | |||||||||||||
| NptpbaseTransportTypeIEC61158 | 1.3.6.1.4.1.18837.3.5.1.2.12.6 | ||||||||||||
node · current IEC61158 | |||||||||||||
| NptpbaseWellKnownEncapsulationTypes | 1.3.6.1.4.1.18837.3.5.1.2.13 | ||||||||||||
| NptpbaseEncapsulationTypeEthernet | 1.3.6.1.4.1.18837.3.5.1.2.13.1 | ||||||||||||
node · current Ethernet Encapsulation type. | |||||||||||||
| NptpbaseEncapsulationTypeVLAN | 1.3.6.1.4.1.18837.3.5.1.2.13.2 | ||||||||||||
node · current VLAN Encapsulation type. | |||||||||||||
| NptpbaseEncapsulationTypeUDPIPLSP | 1.3.6.1.4.1.18837.3.5.1.2.13.3 | ||||||||||||
node · current UDP/IP over MPLS Encapsulation type. | |||||||||||||
| NptpbaseEncapsulationTypePWUDPIPLSP | 1.3.6.1.4.1.18837.3.5.1.2.13.4 | ||||||||||||
node · current UDP/IP Pseudowire over MPLS Encapsulation type. | |||||||||||||
| NptpbaseEncapsulationTypePWEthernetLSP | 1.3.6.1.4.1.18837.3.5.1.2.13.5 | ||||||||||||
node · current Ethernet Pseudowire over MPLS Encapsulation type. | |||||||||||||
| NptpbaseMIBConformance | 1.3.6.1.4.1.18837.3.5.2 | ||||||||||||
| NptpbaseMIBCompliances | 1.3.6.1.4.1.18837.3.5.2.1 | ||||||||||||
| MptpbaseMIBCompliancesSystemInfo | 1.3.6.1.4.1.18837.3.5.2.1.1 | ||||||||||||
compliance · current Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide system-level information of clock devices. Such devices can only be monitored using this MIB module. The module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE.
| |||||||||||||
| MptpbaseMIBCompliancesClockInfo | 1.3.6.1.4.1.18837.3.5.2.1.2 | ||||||||||||
compliance · current Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide clock-related information. Such devices can only be monitored using this MIB module. The module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. | |||||||||||||
| MptpbaseMIBCompliancesClockPortInfo | 1.3.6.1.4.1.18837.3.5.2.1.3 | ||||||||||||
compliance · current Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide clock-port-related information. Such devices can only be monitored using this MIB module. The module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. | |||||||||||||
| MptpbaseMIBCompliancesTransparentClockInfo | 1.3.6.1.4.1.18837.3.5.2.1.4 | ||||||||||||
compliance · current Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide transparent-clock-related information. Such devices can only be monitored using this MIB module. The module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. | |||||||||||||
| NptpbaseMIBGroups | 1.3.6.1.4.1.18837.3.5.2.2 | ||||||||||||
| GptpbaseMIBSystemInfoGroup | 1.3.6.1.4.1.18837.3.5.2.2.1 | ||||||||||||
group · current Group that aggregates objects describing system-wide information | |||||||||||||
| GptpbaseMIBClockCurrentDSGroup | 1.3.6.1.4.1.18837.3.5.2.2.2 | ||||||||||||
group · current Group that aggregates objects describing PTP currentDS information | |||||||||||||
| GptpbaseMIBClockParentDSGroup | 1.3.6.1.4.1.18837.3.5.2.2.3 | ||||||||||||
group · current Group that aggregates objects describing PTP parentDS information
| |||||||||||||
| GptpbaseMIBClockDefaultDSGroup | 1.3.6.1.4.1.18837.3.5.2.2.4 | ||||||||||||
group · current Group that aggregates objects describing PTP defaultDS information | |||||||||||||
| GptpbaseMIBClockRunningGroup | 1.3.6.1.4.1.18837.3.5.2.2.5 | ||||||||||||
group · current Group that aggregates objects describing PTP running state information | |||||||||||||
| GptpbaseMIBClockTimepropertiesGroup | 1.3.6.1.4.1.18837.3.5.2.2.6 | ||||||||||||
group · current Group that aggregates objects describing PTP Time Properties information
| |||||||||||||
| GptpbaseMIBClockTranparentDSGroup | 1.3.6.1.4.1.18837.3.5.2.2.7 | ||||||||||||
group · current Group that aggregates objects describing PTP transparentClockDefaultDS information | |||||||||||||
| GptpbaseMIBClockPortGroup | 1.3.6.1.4.1.18837.3.5.2.2.8 | ||||||||||||
group · current Group that aggregates objects describing information for a given PTP Port | |||||||||||||
| GptpbaseMIBClockPortDSGroup | 1.3.6.1.4.1.18837.3.5.2.2.9 | ||||||||||||
group · current Group that aggregates objects describing PTP portDS information
| |||||||||||||
| GptpbaseMIBClockPortRunningGroup | 1.3.6.1.4.1.18837.3.5.2.2.10 | ||||||||||||
group · current Group that aggregates objects describing PTP running interface information
| |||||||||||||
| GptpbaseMIBClockPortTransDSGroup | 1.3.6.1.4.1.18837.3.5.2.2.11 | ||||||||||||
group · current Group that aggregates objects describing PTP transparentClockPortDS information | |||||||||||||
| GptpbaseMIBClockPortAssociateGroup | 1.3.6.1.4.1.18837.3.5.2.2.12 | ||||||||||||
group · current Group that aggregates objects describing information on peer PTP ports for a given PTP clock port | |||||||||||||
Textual conventions
PtpClockDomainTypeUnsigned32 (0..255)Display hint:
dThe Domain is identified by an integer, the domainNumber, in the range of 0 to 255. An integer value that is used to assign each PTP device to a particular domain.
PtpClockIdentityOCTET STRING (SIZE (8))Display hint:
255aThe clock identity is an 8-octet array and will be presented in the form of a character array. Network byte order is assumed. The value of the PtpClockIdentity should be taken from the IEEE EUI-64 individual assigned numbers as indicated in Section 7.5.2.2.2 of [IEEE-1588-2008]. It can also be a non-EUI-64 address as defined in Section 7.5.2.2.3 of [IEEE-1588-2008]. The clock identifier can be constructed from existing EUI-48 assignments.
PtpClockInstanceTypeUnsigned32 (0..255)Display hint:
dThe instance of the clock of a given clock type in a given domain.
PtpClockIntervalBase2Integer32 (-128..127)Display hint:
dThe interval included in message types Announce, Sync, Delay_Req, and Pdelay_Req as indicated in Section 7.7.2.1 of [IEEE-1588-2008].
PtpClockMechanismTypeINTEGERdisabled(254)e2e(1)p2p(2)The clock type based on whether end-to-end or peer-to-peer mechanisms are used. The mechanism used to calculate the Mean Path Delay as indicated in Table 9 of [IEEE-1588-2008].
PtpClockPortNumberUnsigned32 (0..65535)Display hint:
dAn index identifying a specific PTP port on a PTP node.
PtpClockPortStateINTEGERdisabled(3)faulty(2)initializing(1)listening(4)master(6)passive(7)preMaster(5)slave(9)uncalibrated(8)This is the value of the current state of the protocol engine associated with this port.
PtpClockPortTransportTypeAddressOCTET STRING (SIZE (1..255))Display hint:
255aThe clock port transport protocol address used for this communication between the clock nodes. This is a string corresponding to the address type as specified by the transport type used. The transport types can be defined elsewhere, in addition to the ones defined in this document. This can be an address of type IP version 4, IP version 6, Ethernet, DeviceNET, ControlNET, or IEC61158. The OCTET STRING representation of the OID of ptpbaseWellKnownTransportTypes will be used in the values contained in the OCTET STRING.
PtpClockProfileTypeINTEGERdefault(1)telecom(2)vendorspecific(3)Clock Profile used. A profile is the set of allowed PTP features applicable to a device.
PtpClockQualityAccuracyTypeINTEGERmicroSec1(35)microSec10(37)microSec100(39)microSec25(38)microSec250(40)microSec2dot5(36)milliSec1(41)milliSec10(43)milliSec100(45)milliSec25(44)milliSec250(46)milliSec2dot5(42)nanoSecond100(33)nanoSecond25(32)nanoSecond250(34)second1(47)second10(48)secondGreater10(49)unknown(254)The ClockQuality as specified in Section 5.3.7, Section 7.6.2.5, and Table 6 of [IEEE-1588-2008]. The following values are not represented in the enumerated values. 0x01-0x1F Reserved 0x32-0x7F Reserved It is important to note that Section 7.1.1 of RFC 2578 allows for gaps and for enumerated values to start at zero when indicated by the protocol.PtpClockQualityClassTypeINTEGERclockclass13(13)clockclass14(14)clockclass52(52)clockclass58(58)clockclass6(6)clockclass7(7)The ClockQuality as specified in Section 5.3.7, Section 7.6.2.4, and Table 5 of [IEEE-1588-2008].
PtpClockRoleTypeINTEGERmaster(1)slave(2)The Clock Role. The protocol generates a master-slave relationship among the clocks in the system. Clock Role Value ------------------------- Master clock 1 Slave clock 2
PtpClockStateTypeINTEGERacquiring(3)freerun(1)frequencyLocked(4)holdover(2)phaseAligned(5)The clock state returned by a PTP engine. Clock State Value ------------------------ Freerun state 1 Holdover state 2 Acquiring state 3 Freq_locked state 4 Phase_aligned state 5
PtpClockTimeIntervalOCTET STRING (SIZE (1..255))Display hint:
255aThis textual convention corresponds to the TimeInterval structure indicated in Section 5.3.2 of [IEEE-1588-2008]. It will be presented in the form of a character array. Network byte order is assumed.
PtpClockTimeSourceTypeINTEGERatomicClock(16)gps(32)handSet(96)internalOscillator(160)ntp(80)other(144)ptp(64)terrestrialRadio(48)The ClockQuality as specified in Sections 5.3.7, Section 7.6.2.6, and Table 7 of [IEEE-1588-2008]. The following values are not represented in the enumerated values. 0xF0-0xFE For use by alternate PTP profiles 0xFF Reserved It is important to note that Section 7.1.1 of RFC 2578 allows for gaps and for enumerated values to start at zero when indicated by the protocol.
PtpClockTxModeTypeINTEGERmulticast(2)multicastmix(3)unicast(1)Transmission mode. Unicast: Using unicast communication channel. Multicast: Using Multicast communication channel. multicast-mix: Using multicast-unicast communication channel
PtpClockTypeINTEGERboundaryClock(2)boundaryNode(4)ordinaryClock(1)transparentClock(3)The clock types as defined in the MIB module description.
Groups and compliance
- ptpbaseMIBClockCurrentDSGroup
- ptpbaseMIBClockDefaultDSGroup
- ptpbaseMIBClockParentDSGroup
- ptpbaseMIBClockPortAssociateGroup
- ptpbaseMIBClockPortDSGroup
- ptpbaseMIBClockPortGroup
- ptpbaseMIBClockPortRunningGroup
- ptpbaseMIBClockPortTransDSGroup
- ptpbaseMIBClockRunningGroup
- ptpbaseMIBClockTimepropertiesGroup
- ptpbaseMIBClockTranparentDSGroup
- ptpbaseMIBCompliancesClockInfo
- ptpbaseMIBCompliancesClockPortInfo
- ptpbaseMIBCompliancesSystemInfo
- ptpbaseMIBCompliancesTransparentClockInfo
- ptpbaseMIBSystemInfoGroup