SNR-ERD-4
NAG LLCThe MIB module for SNR-ERD
snmptranslate -m SNR-ERD-4 -Tpsnmpwalk -v2c -c <community> -m SNR-ERD-4 <host> 1.3.6.1.4.1.40418Imports
| RFC1155-SMI | Counter32 |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Isnr | 1.3.6.1.4.1.40418 | ||||||||||||
identity The MIB module for SNR-ERD | |||||||||||||
| Nsnr-erd | 1.3.6.1.4.1.40418.2 | ||||||||||||
| Nsnr-erd-4 | 1.3.6.1.4.1.40418.2.6 | ||||||||||||
| Ntraps | 1.3.6.1.4.1.40418.2.6.0 | ||||||||||||
| !DI1Alarm | 1.3.6.1.4.1.40418.2.6.0.1 | ||||||||||||
notification · current Input 1 Alarm fires | |||||||||||||
| !DI1Release | 1.3.6.1.4.1.40418.2.6.0.2 | ||||||||||||
notification · current Input 1 Alarm released | |||||||||||||
| !DI2Alarm | 1.3.6.1.4.1.40418.2.6.0.3 | ||||||||||||
notification · current Input 2 Alarm fires | |||||||||||||
| !DI2Release | 1.3.6.1.4.1.40418.2.6.0.4 | ||||||||||||
notification · current Input 2 Alarm released | |||||||||||||
| !DI3Alarm | 1.3.6.1.4.1.40418.2.6.0.5 | ||||||||||||
notification · current Input 3 Alarm fires | |||||||||||||
| !DI3Release | 1.3.6.1.4.1.40418.2.6.0.6 | ||||||||||||
notification · current Input 3 Alarm released | |||||||||||||
| !DI4Alarm | 1.3.6.1.4.1.40418.2.6.0.7 | ||||||||||||
notification · current Input 4 Alarm fires | |||||||||||||
| !DI4Release | 1.3.6.1.4.1.40418.2.6.0.8 | ||||||||||||
notification · current Input 4 Alarm released | |||||||||||||
| !DI5Alarm | 1.3.6.1.4.1.40418.2.6.0.9 | ||||||||||||
notification · current Input 5 Alarm fires | |||||||||||||
| !DI5Release | 1.3.6.1.4.1.40418.2.6.0.10 | ||||||||||||
notification · current Input 5 Alarm released | |||||||||||||
| !uSenseAlarm | 1.3.6.1.4.1.40418.2.6.0.11 | ||||||||||||
notification · current Signifies that Phase sensor Alarm fires | |||||||||||||
| !uSenseRelease | 1.3.6.1.4.1.40418.2.6.0.12 | ||||||||||||
notification · current Signifies that Phase sensor Alarm released | |||||||||||||
| !reloutOn | 1.3.6.1.4.1.40418.2.6.0.13 | ||||||||||||
notification · current Signifies that Rele was swithed on by Thermostat or Gigrostat mode | |||||||||||||
| !reloutOff | 1.3.6.1.4.1.40418.2.6.0.14 | ||||||||||||
notification · current Signifies that Rele was swithed off by Thermostat or Gigrostat mode | |||||||||||||
| !DO1On | 1.3.6.1.4.1.40418.2.6.0.15 | ||||||||||||
notification · current Signifies that Output 1 was swithed on by Thermostat or Gigrostat mode | |||||||||||||
| !DO1Off | 1.3.6.1.4.1.40418.2.6.0.16 | ||||||||||||
notification · current Signifies that Output 1 was swithed off by Thermostat or Gigrostat mode | |||||||||||||
| !DO2On | 1.3.6.1.4.1.40418.2.6.0.17 | ||||||||||||
notification · current Signifies that Output 2 was swithed on by Thermostat or Gigrostat mode | |||||||||||||
| !DO2Off | 1.3.6.1.4.1.40418.2.6.0.18 | ||||||||||||
notification · current Signifies that Output 2 was swithed off by Thermostat or Gigrostat mode | |||||||||||||
| !DO3On | 1.3.6.1.4.1.40418.2.6.0.19 | ||||||||||||
notification · current Signifies that Output 3 was swithed on by Thermostat or Gigrostat mode | |||||||||||||
| !DO3Off | 1.3.6.1.4.1.40418.2.6.0.20 | ||||||||||||
notification · current Signifies that Output 3 was swithed off by Thermostat or Gigrostat mode | |||||||||||||
| !DO4On | 1.3.6.1.4.1.40418.2.6.0.21 | ||||||||||||
notification · current Signifies that Output 4 was swithed on by Thermostat or Gigrostat mode | |||||||||||||
| !DO4Off | 1.3.6.1.4.1.40418.2.6.0.22 | ||||||||||||
notification · current Signifies that Output 4 was swithed off by Thermostat or Gigrostat mode | |||||||||||||
| !DO5On | 1.3.6.1.4.1.40418.2.6.0.23 | ||||||||||||
notification · current Signifies that Output 5 was swithed on by Thermostat or Gigrostat mode | |||||||||||||
| !DO5Off | 1.3.6.1.4.1.40418.2.6.0.24 | ||||||||||||
notification · current Signifies that Output 5 was swithed off by Thermostat or Gigrostat mode | |||||||||||||
| !tempSensorAlarm | 1.3.6.1.4.1.40418.2.6.0.29 | ||||||||||||
notification · current Temperature alarm | |||||||||||||
| !tempSensorRelease | 1.3.6.1.4.1.40418.2.6.0.30 | ||||||||||||
notification · current Temperature release | |||||||||||||
| !adcSensorAlarm | 1.3.6.1.4.1.40418.2.6.0.31 | ||||||||||||
notification · current Voltage sensor alarm | |||||||||||||
| !adcSensorRelease | 1.3.6.1.4.1.40418.2.6.0.32 | ||||||||||||
notification · current Voltage sensor release | |||||||||||||
| !humSensorAlarm | 1.3.6.1.4.1.40418.2.6.0.33 | ||||||||||||
notification · current Humidity alarm | |||||||||||||
| !humSensorRelease | 1.3.6.1.4.1.40418.2.6.0.34 | ||||||||||||
notification · current Humidity release | |||||||||||||
| !task1Done | 1.3.6.1.4.1.40418.2.6.0.36 | ||||||||||||
notification · current Task 1 done | |||||||||||||
| !task2Done | 1.3.6.1.4.1.40418.2.6.0.37 | ||||||||||||
notification · current Task 2 done | |||||||||||||
| !task3Done | 1.3.6.1.4.1.40418.2.6.0.38 | ||||||||||||
notification · current Task 3 done | |||||||||||||
| !task4Done | 1.3.6.1.4.1.40418.2.6.0.39 | ||||||||||||
notification · current Task 4 done | |||||||||||||
| !pingLost | 1.3.6.1.4.1.40418.2.6.0.45 | ||||||||||||
notification · current Ping lost | |||||||||||||
| !batteryChargeLow | 1.3.6.1.4.1.40418.2.6.0.47 | ||||||||||||
notification · current Battery charge is low | |||||||||||||
| !upsUtilityFail | 1.3.6.1.4.1.40418.2.6.0.50 | ||||||||||||
notification · current UPS utility fail | |||||||||||||
| !upsUtilityOk | 1.3.6.1.4.1.40418.2.6.0.51 | ||||||||||||
notification · current UPS utility OK | |||||||||||||
| Nmeasurements | 1.3.6.1.4.1.40418.2.6.1 | ||||||||||||
| NoneWire | 1.3.6.1.4.1.40418.2.6.1.1 | ||||||||||||
| TdtsTable | 1.3.6.1.4.1.40418.2.6.1.1.1 | NA | |||||||||||
table · not-accessible · current A list of temperature sensors values | |||||||||||||
| RdtsEntry | 1.3.6.1.4.1.40418.2.6.1.1.1.1 | NA | |||||||||||
| CdtsId | 1.3.6.1.4.1.40418.2.6.1.1.1.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Temperature sensor id | |||||||||||||
| CdtsName | 1.3.6.1.4.1.40418.2.6.1.1.1.1.2 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current Name (max 20) | |||||||||||||
| CdtsTemp | 1.3.6.1.4.1.40418.2.6.1.1.1.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Temperature value | |||||||||||||
| CtempCritNotif defined twice | 1.3.6.1.4.1.40418.2.6.1.1.1.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Enable notifications on the critical temperature
| |||||||||||||
| CtempCritMin defined twice | 1.3.6.1.4.1.40418.2.6.1.1.1.1.15 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Minimal critical temperature. Up to -55 °C | |||||||||||||
| CtempCritMax defined twice | 1.3.6.1.4.1.40418.2.6.1.1.1.1.16 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Maximum critical temperature. Up to +125°C | |||||||||||||
| TshuntTable | 1.3.6.1.4.1.40418.2.6.1.1.2 | NA | |||||||||||
table · not-accessible · current A list of SNR-SHUNT values | |||||||||||||
| RshuntEntry | 1.3.6.1.4.1.40418.2.6.1.1.2.1 | NA | |||||||||||
| CshuntId | 1.3.6.1.4.1.40418.2.6.1.1.2.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current SNR-SHUNT id | |||||||||||||
| CshuntName | 1.3.6.1.4.1.40418.2.6.1.1.2.1.2 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current Name (max 20) | |||||||||||||
| CshuntTemp | 1.3.6.1.4.1.40418.2.6.1.1.2.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Temperature value | |||||||||||||
| CshuntVolt | 1.3.6.1.4.1.40418.2.6.1.1.2.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Voltage | |||||||||||||
| CshuntCurrent | 1.3.6.1.4.1.40418.2.6.1.1.2.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Current | |||||||||||||
| SshuntChrgLvl | 1.3.6.1.4.1.40418.2.6.1.1.2.1.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Battery charge level (0..100%) | |||||||||||||
| CshuntChrgCap | 1.3.6.1.4.1.40418.2.6.1.1.2.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Charge capacity | |||||||||||||
| CshuntDischCap | 1.3.6.1.4.1.40418.2.6.1.1.2.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Discharge capacity | |||||||||||||
| CshuntEndOfChrg | 1.3.6.1.4.1.40418.2.6.1.1.2.1.9 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current End of charge time | |||||||||||||
| CshuntDiscn | 1.3.6.1.4.1.40418.2.6.1.1.2.1.10 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current Disconnect time | |||||||||||||
| CshuntBatLive | 1.3.6.1.4.1.40418.2.6.1.1.2.1.11 | TimeTicks | RO | ||||||||||
column · TimeTicks · read-only · current Battery using period | |||||||||||||
| CshuntDischTime | 1.3.6.1.4.1.40418.2.6.1.1.2.1.12 | TimeTicks | RO | ||||||||||
column · TimeTicks · read-only · current Time to full discharge | |||||||||||||
| SadcSensor | 1.3.6.1.4.1.40418.2.6.1.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current ADC sensor value | |||||||||||||
| StemperatureDHT | 1.3.6.1.4.1.40418.2.6.1.8 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current DHT temperature value | |||||||||||||
| ShumidityDHT | 1.3.6.1.4.1.40418.2.6.1.9 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current DHT humidity value | |||||||||||||
| TrfshtpTable | 1.3.6.1.4.1.40418.2.6.1.10 | NA | |||||||||||
table · not-accessible · current A list of wireless sensors values | |||||||||||||
| RrfshtpEntry | 1.3.6.1.4.1.40418.2.6.1.10.1 | NA | |||||||||||
| CrfshtpId | 1.3.6.1.4.1.40418.2.6.1.10.1.1 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current Wireless sensor id | |||||||||||||
| CrfshtpName | 1.3.6.1.4.1.40418.2.6.1.10.1.2 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current Name (max 20) | |||||||||||||
| CrfshtpTemp | 1.3.6.1.4.1.40418.2.6.1.10.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Temperature value | |||||||||||||
| CrfshtpHum | 1.3.6.1.4.1.40418.2.6.1.10.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Humidity value | |||||||||||||
| CrfshtpPres | 1.3.6.1.4.1.40418.2.6.1.10.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Pressure value | |||||||||||||
| Nsp | 1.3.6.1.4.1.40418.2.6.1.30 | ||||||||||||
| TrsshtpTable | 1.3.6.1.4.1.40418.2.6.1.30.1 | NA | |||||||||||
table · not-accessible · current A list of SNR-RSsensor-H/T/P values | |||||||||||||
| RrsshtpEntry | 1.3.6.1.4.1.40418.2.6.1.30.1.1 | NA | |||||||||||
| CrsshtpIdent | 1.3.6.1.4.1.40418.2.6.1.30.1.1.1 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current SNR-RSsensor-H/T/P id | |||||||||||||
| CrsshtpName | 1.3.6.1.4.1.40418.2.6.1.30.1.1.2 | OCTET STRING | RW | RSsensor-H/T/P | |||||||||
column · OCTET STRING · read-write · current Name (max 20) Example values from LibreNMS test devices
| |||||||||||||
| CrsshtpTemp | 1.3.6.1.4.1.40418.2.6.1.30.1.1.3 | INTEGER | RO | 27 | |||||||||
column · INTEGER · read-only · current Temperature value 1 Example values from LibreNMS test devices
| |||||||||||||
| CrsshtpHum | 1.3.6.1.4.1.40418.2.6.1.30.1.1.4 | INTEGER | RO | 37 | |||||||||
column · INTEGER · read-only · current Humidity value Example values from LibreNMS test devices
| |||||||||||||
| CrsshtpPssr | 1.3.6.1.4.1.40418.2.6.1.30.1.1.6 | INTEGER | RO | 748 | |||||||||
column · INTEGER · read-only · current Pressure value Example values from LibreNMS test devices
| |||||||||||||
| StempCritNotif defined twice | 1.3.6.1.4.1.40418.2.6.1.30.1.1.10 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable notifications on the critical temperature
| |||||||||||||
| StempCritMin defined twice | 1.3.6.1.4.1.40418.2.6.1.30.1.1.15 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Minimal critical temperature. Up to -55 °C | |||||||||||||
| StempCritMax defined twice | 1.3.6.1.4.1.40418.2.6.1.30.1.1.16 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Maximum critical temperature. Up to +125°C | |||||||||||||
| TrscounterTable | 1.3.6.1.4.1.40418.2.6.1.30.5 | NA | |||||||||||
table · not-accessible · current A list of SNR-RS-Counter | |||||||||||||
| RrscounterEntry | 1.3.6.1.4.1.40418.2.6.1.30.5.1 | NA | |||||||||||
| CrscounterIdent | 1.3.6.1.4.1.40418.2.6.1.30.5.1.1 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current SNR-RS-Counter id | |||||||||||||
| CrscounterName | 1.3.6.1.4.1.40418.2.6.1.30.5.1.2 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current Name (max 20) | |||||||||||||
| Trsshtp1WTable | 1.3.6.1.4.1.40418.2.6.1.30.100 | NA | |||||||||||
table · not-accessible · current A list of temperature sensors are connected to SNR-RSsensor-H/T/P | |||||||||||||
| Rrsshtp1WEntry | 1.3.6.1.4.1.40418.2.6.1.30.100.1 | NA | |||||||||||
| Crsshtp1WIdent | 1.3.6.1.4.1.40418.2.6.1.30.100.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Temperature sensor id | |||||||||||||
| Crsshtp1WName | 1.3.6.1.4.1.40418.2.6.1.30.100.1.2 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current Name (max 20) | |||||||||||||
| Crsshtp1WTemp | 1.3.6.1.4.1.40418.2.6.1.30.100.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Temperature value | |||||||||||||
| Crsshtp1WMaster | 1.3.6.1.4.1.40418.2.6.1.30.100.1.4 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current Name of the SNR-RSsensor-H/T/P which this temperature sensor is connected to | |||||||||||||
| StempCritNotif defined twice | 1.3.6.1.4.1.40418.2.6.1.30.100.1.10 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable notifications on the critical temperature
| |||||||||||||
| StempCritMin defined twice | 1.3.6.1.4.1.40418.2.6.1.30.100.1.15 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Minimal critical temperature. Up to -55 °C | |||||||||||||
| StempCritMax defined twice | 1.3.6.1.4.1.40418.2.6.1.30.100.1.16 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Maximum critical temperature. Up to +125°C | |||||||||||||
| NsensorsTemplate | 1.3.6.1.4.1.40418.2.6.1.50 | ||||||||||||
| TsensorsTemplateTable | 1.3.6.1.4.1.40418.2.6.1.50.1 | NA | |||||||||||
table · not-accessible · current A list of sensors values | |||||||||||||
| RsensorsTemplateEntry | 1.3.6.1.4.1.40418.2.6.1.50.1.1 | NA | |||||||||||
row · not-accessible · current An entry (conceptual row) in the rsshtp1WTable
| |||||||||||||
| CsensorsTemplateValue | 1.3.6.1.4.1.40418.2.6.1.50.1.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Current value | |||||||||||||
| CsensorsTemplateName | 1.3.6.1.4.1.40418.2.6.1.50.1.1.2 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current Name | |||||||||||||
| SsensorsTemplateTotalConnected | 1.3.6.1.4.1.40418.2.6.1.50.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Total value of connected sensors | |||||||||||||
| Ndio | 1.3.6.1.4.1.40418.2.6.2 | ||||||||||||
| TdiTable | 1.3.6.1.4.1.40418.2.6.2.1 | NA | |||||||||||
table · not-accessible · current A list of digital inputs values | |||||||||||||
| RdiEntry | 1.3.6.1.4.1.40418.2.6.2.1.1 | NA | |||||||||||
row · not-accessible · current An entry (conceptual row) in the diTable | |||||||||||||
| CdiName | 1.3.6.1.4.1.40418.2.6.2.1.1.1 | OCTET STRING | RO | DI2 | |||||||||
| CdiAlarmName | 1.3.6.1.4.1.40418.2.6.2.1.1.2 | OCTET STRING | RW | Input-Power | |||||||||
| CdiState | 1.3.6.1.4.1.40418.2.6.2.1.1.3 | INTEGER | RO | low(0) | |||||||||
| CdiCnt | 1.3.6.1.4.1.40418.2.6.2.1.1.4 | Counter32 | RW | 5 | |||||||||
| TdoTable | 1.3.6.1.4.1.40418.2.6.2.2 | NA | |||||||||||
table · not-accessible · current A list of digital outputs values | |||||||||||||
| RdoEntry | 1.3.6.1.4.1.40418.2.6.2.2.1 | NA | |||||||||||
row · not-accessible · current An entry (conceptual row) in the doTable | |||||||||||||
| CdoName | 1.3.6.1.4.1.40418.2.6.2.2.1.1 | OCTET STRING | RO | Relay | |||||||||
| CdoDeviceName | 1.3.6.1.4.1.40418.2.6.2.2.1.2 | OCTET STRING | RW | | |||||||||
| CdoState | 1.3.6.1.4.1.40418.2.6.2.2.1.3 | INTEGER | RW | off(0) | |||||||||
| SdoResetDelay | 1.3.6.1.4.1.40418.2.6.2.2.1.4 | INTEGER | RW | 3 | |||||||||
| SuSenseState | 1.3.6.1.4.1.40418.2.6.2.3 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Voltage sensor state
| |||||||||||||
| Nserial | 1.3.6.1.4.1.40418.2.6.4 | ||||||||||||
| Nrs485 | 1.3.6.1.4.1.40418.2.6.4.1 | ||||||||||||
| SconnectStatusRS485 | 1.3.6.1.4.1.40418.2.6.4.1.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current RS485 TCP connection status
| |||||||||||||
| SipAddrRS485 | 1.3.6.1.4.1.40418.2.6.4.1.2 | IPADDRESS | RO | ||||||||||
scalar · IPADDRESS · read-only · current RS485 TCP connection IP address | |||||||||||||
| Nrs232 | 1.3.6.1.4.1.40418.2.6.4.2 | ||||||||||||
| SconnectStatusRS232 | 1.3.6.1.4.1.40418.2.6.4.2.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current RS232 TCP connection status
| |||||||||||||
| SipAddrRS232 | 1.3.6.1.4.1.40418.2.6.4.2.2 | IPADDRESS | RO | ||||||||||
scalar · IPADDRESS · read-only · current RS232 TCP connection IP address | |||||||||||||
| Nmodules | 1.3.6.1.4.1.40418.2.6.5 | ||||||||||||
| Ngsm | 1.3.6.1.4.1.40418.2.6.5.1 | ||||||||||||
| SgsmModuleStatus | 1.3.6.1.4.1.40418.2.6.5.1.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current GSM module status
| |||||||||||||
| SgsmStrength | 1.3.6.1.4.1.40418.2.6.5.1.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Signal level (dBm) | |||||||||||||
| SgsmReconnCount | 1.3.6.1.4.1.40418.2.6.5.1.10 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Number of connection attempts | |||||||||||||
| Nrf | 1.3.6.1.4.1.40418.2.6.5.2 | ||||||||||||
| SrfModuleStatus | 1.3.6.1.4.1.40418.2.6.5.2.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Status of the rf module
| |||||||||||||
| Noptions | 1.3.6.1.4.1.40418.2.6.10 | ||||||||||||
| SdataType | 1.3.6.1.4.1.40418.2.6.10.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Values data type
| |||||||||||||
| Ncrit | 1.3.6.1.4.1.40418.2.6.10.10 | ||||||||||||
| ShumCrit | 1.3.6.1.4.1.40418.2.6.10.10.20 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Critical humidity. From 0 to 100% | |||||||||||||
| SadcCritMin | 1.3.6.1.4.1.40418.2.6.10.10.30 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current ADC IN critical min | |||||||||||||
| SadcCritMax | 1.3.6.1.4.1.40418.2.6.10.10.31 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current ADC IN critical max | |||||||||||||
| SadcHysteresis | 1.3.6.1.4.1.40418.2.6.10.10.35 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current ADC IN hysteresis | |||||||||||||
| Sreboot | 1.3.6.1.4.1.40418.2.6.10.300 | INTEGER | WO | ||||||||||
scalar · INTEGER · write-only · current Send 1 to reboot | |||||||||||||
| Ndiffparams | 1.3.6.1.4.1.40418.2.6.11 | ||||||||||||
| NupsStatus | 1.3.6.1.4.1.40418.2.6.11.1 | ||||||||||||
| SstatusUPS | 1.3.6.1.4.1.40418.2.6.11.1.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current UPS status
| |||||||||||||
| SbeeperStatusUPS | 1.3.6.1.4.1.40418.2.6.11.1.8 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Beeper status. Megatec only | |||||||||||||
| SshutdownStatusUPS | 1.3.6.1.4.1.40418.2.6.11.1.10 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Shutdown is active. Megatec only | |||||||||||||
| SlastBatteryChangeUPS | 1.3.6.1.4.1.40418.2.6.11.1.20 | OCTET STRING | RW | ||||||||||
scalar · OCTET STRING · read-write · current Last battery change date (mm/dd/yyyy). Smart only | |||||||||||||
| SshutdownTimeUPS | 1.3.6.1.4.1.40418.2.6.11.1.51 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Shutdown period, minutes for Megatec, seconds for Smart. Writeble for Megatec only | |||||||||||||
| SturnOnTimeUPS | 1.3.6.1.4.1.40418.2.6.11.1.52 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Turn on period, minutes. Megatec only | |||||||||||||
| SstartShutdownTurnOnUPS | 1.3.6.1.4.1.40418.2.6.11.1.53 | INTEGER | WO | ||||||||||
scalar · INTEGER · write-only · current Shutdown after shutdownTimeUPS and turn on after turnOnTimeUPS for Megatec. Shutdown after shutdownTimeUPS for Smart. Send 1 to start, 0 to stop | |||||||||||||
| SstartTurnOnUPS | 1.3.6.1.4.1.40418.2.6.11.1.54 | INTEGER | WO | ||||||||||
scalar · INTEGER · write-only · current Turn on immediately, send 1 to turn on. Smart only | |||||||||||||
| SstartLongTestUPS | 1.3.6.1.4.1.40418.2.6.11.1.71 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Start specified time period test. Send period in minutes to start. Megatec only | |||||||||||||
| Npid | 1.3.6.1.4.1.40418.2.6.11.10 | ||||||||||||
| SinputPID | 1.3.6.1.4.1.40418.2.6.11.10.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current PID SNMP input value | |||||||||||||
| SoutputPercentPID | 1.3.6.1.4.1.40418.2.6.11.10.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current PID output value. 0 to 100% | |||||||||||||
| SoutputRealPID | 1.3.6.1.4.1.40418.2.6.11.10.3 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current PID output value (voltage if PID runs in analog mode or time if PID runs in PWM mode) | |||||||||||||
| SypPID | 1.3.6.1.4.1.40418.2.6.11.10.4 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Proportional gain | |||||||||||||
| SyiPID | 1.3.6.1.4.1.40418.2.6.11.10.5 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Integral gain | |||||||||||||
| SydPID | 1.3.6.1.4.1.40418.2.6.11.10.6 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Derivative gain | |||||||||||||
| SerrorPID | 1.3.6.1.4.1.40418.2.6.11.10.7 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Error. Difference between setpoint and input value | |||||||||||||
| Gerd4Group | 1.3.6.1.4.1.40418.2.6.99 | ||||||||||||
group · current Notifications
| |||||||||||||
Traps / Notifications
- adcSensorAlarm
1.3.6.1.4.1.40418.2.6.0.31 - adcSensorRelease
1.3.6.1.4.1.40418.2.6.0.32 - batteryChargeLow
1.3.6.1.4.1.40418.2.6.0.47 - humSensorAlarm
1.3.6.1.4.1.40418.2.6.0.33 - humSensorRelease
1.3.6.1.4.1.40418.2.6.0.34 - pingLost
1.3.6.1.4.1.40418.2.6.0.45 - reloutOff
1.3.6.1.4.1.40418.2.6.0.14 - reloutOn
1.3.6.1.4.1.40418.2.6.0.13 - task1Done
1.3.6.1.4.1.40418.2.6.0.36 - task2Done
1.3.6.1.4.1.40418.2.6.0.37 - task3Done
1.3.6.1.4.1.40418.2.6.0.38 - task4Done
1.3.6.1.4.1.40418.2.6.0.39 - tempSensorAlarm
1.3.6.1.4.1.40418.2.6.0.29 - tempSensorRelease
1.3.6.1.4.1.40418.2.6.0.30 - uSenseAlarm
1.3.6.1.4.1.40418.2.6.0.11 - uSenseRelease
1.3.6.1.4.1.40418.2.6.0.12 - upsUtilityFail
1.3.6.1.4.1.40418.2.6.0.50 - upsUtilityOk
1.3.6.1.4.1.40418.2.6.0.51 - DI1Alarm
1.3.6.1.4.1.40418.2.6.0.1 - DI1Release
1.3.6.1.4.1.40418.2.6.0.2 - DI2Alarm
1.3.6.1.4.1.40418.2.6.0.3 - DI2Release
1.3.6.1.4.1.40418.2.6.0.4 - DI3Alarm
1.3.6.1.4.1.40418.2.6.0.5 - DI3Release
1.3.6.1.4.1.40418.2.6.0.6 - DI4Alarm
1.3.6.1.4.1.40418.2.6.0.7 - DI4Release
1.3.6.1.4.1.40418.2.6.0.8 - DI5Alarm
1.3.6.1.4.1.40418.2.6.0.9 - DI5Release
1.3.6.1.4.1.40418.2.6.0.10 - DO1Off
1.3.6.1.4.1.40418.2.6.0.16 - DO1On
1.3.6.1.4.1.40418.2.6.0.15 - DO2Off
1.3.6.1.4.1.40418.2.6.0.18 - DO2On
1.3.6.1.4.1.40418.2.6.0.17 - DO3Off
1.3.6.1.4.1.40418.2.6.0.20 - DO3On
1.3.6.1.4.1.40418.2.6.0.19 - DO4Off
1.3.6.1.4.1.40418.2.6.0.22 - DO4On
1.3.6.1.4.1.40418.2.6.0.21 - DO5Off
1.3.6.1.4.1.40418.2.6.0.24 - DO5On
1.3.6.1.4.1.40418.2.6.0.23