MIB Browser
This is the enterprise specific TC MIB for
Smartoptics containing common textual conventions.
Organization
Smartoptics
Root OID
1.3.6.1.4.1.30826.3
Last updated
Objects
1
Source
Show full MIB
snmptranslate -m SO-TC-MIB -Tp
snmpwalk -v2c -c <community> -m SO-TC-MIB <host> 1.3.6.1.4.1.30826.3

Imports

SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIBits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, PhysAddress, TEXTUAL-CONVENTION
SO-MIBsmartoptics

OID tree

NameOIDTypeAccessStatus
IsoTcMIB1.3.6.1.4.1.30826.3

Textual conventions

DcpHundreds Integer32

Display hint: d-2

An integer to be displayed with 2 decimal place. 100 is displayes as 1.0
DcpTenths Integer32

Display hint: d-1

An integer to be displayed with 1 decimal place. 100 is displayes as 10.0
InterfacePortMode INTEGER

localAD(2) na(1) xc1(3) xc2(4) xc3(5) xc4Wss1(6) xc4Wss2(7) xc4Wss3(8) xc4Wss4(9) xc4Wss5(10)

The interface port mode for a service.
na - Not applicable.
localAD - The service is added to the chosen channel on the local Add/drop ports.
xc1 - The service is added to the cross connect port XC1.
xc2 - The service is added to the cross connect port XC2.
xc3 - The service is added to the cross connect port XC3.
xc4Wss1 - The service is added to the cross connect port XC4:Wss1.
xc4Wss2 - The service is added to the cross connect port XC4:Wss2.
xc4Wss3 - The service is added to the cross connect port XC4:Wss2.
xc4Wss4 - The service is added to the cross connect port XC4:Wss4.
xc4Wss5 - The service is added to the cross connect port XC4:Wss5.
InterfaceStatus INTEGER

down(2) idle(1) up(3)

The operational state for a port, interface or optical channel.

idle - The port, interface or optical channel is not activated.

down - The port, interface or optical channel traffic is lost.

up - There is traffic on the port, interface or optical channel.
ItuPerceivedSeverity INTEGER

cleared(1) critical(3) indeterminate(2) major(4) minor(5) warning(6)

ITU perceived severity values
OchPortMode INTEGER

edfa(3) express(4) off(2) on(1)

The operational state for a port, interface or optical channel.
on - The channel is enabled.
off - The channel is disabled.
edfa - The channel is enabled and connected to the edfa port.
express - The channel is enabled and connected to the express port.
OpticalPower1Decimal Integer32

Display hint: d-1

Power level at an interface in units of 0.1 dBm.

Used by